R
R420S
MODEL ENGINE
DIMENSIONAL SPECIFICATIONS
LIFTING SPECIFICATIONS
OPERATIONAL SPECIFICATIONS
DRIVE TRAIN & HYDRAULIC PUMP
FLUID REFILL
ROPS/FOPS
MAKE & MODEL TYPE HORSEPOWER
(SAEJ 1995 gross) (SAEJ 1349 net)
DISPLACEMENT TURBOCHARGER E-TVCS A OVERALL HEIGHT B OVERALL LENGTH (w/ Bucket & Weight) C OVERALL WIDTH (w/ out Bucket) D OVERALL OPERATING HEIGHT E HEIGHT TO HINGE PIN F DUMP ANGLE FULLY RAISED G DUMP HEIGHT H REACH FULLY RAISED I DIGGING DEPTH J WHEELBASE K GROUND CLEARANCE L TREAD M ANGLE OF ARTICULATION (Each Way) N FRAME OSCILLATION (Each Way) TIPPING LOAD STRAIGHT (SAE Rating) with Bucket with Pallet Forks TIPPING LOAD FULL TURN (SAE Rating) with Bucket with Pallet Forks OPERATING LOAD with Bucket with Pallet Forks COUNTER WEIGHT / Standard STANDARD BUCKET CAPACITY BUCKET BREAKOUT FORCE LOADER RAISE TIME LOADER LOWER TIME BUCKET DUMP TIME DRAW BAR PULL LOADER CLEARANCE CIRCLE O OPERATING WEIGHT STANDARD TIRES TRANSMISSION NUMBER OF SPEEDS TRAVEL SPEED w / Travel Speed Limiter On BRAKES / Service / Parking PUMP TYPE AND OUTPUT / LST / MAIN / CHARGE AUXILIARY HYDRAULIC FLOW FUEL TANK HYDRAULIC SYSTEM HYDRAULIC RESERVOIR
2-Post Canopy
R420S
Cab
Kubota D1503-M-T-E3 Liquid cooled, 3-Cylinder Diesel 41.2 @ 2,600 rpm 39.0 @ 2,600 rpm 91.4 cu. in. YES YES 98.8" 103.5" 165.8" 59.8" 137.8" 9'2.7" 43° 7'4.4" 30.8" 2.6" 69.9" 11.3" 46.5" 40° 8° 4,585 lbs. 3,300 lbs. 3,850 lbs. 2,800 lbs. 1,925 lbs. 1,400 lbs. 1,500 lbs. .50 cubic yards 6,550 lbs. 4.24 seconds 3.11 seconds 0.86 seconds 5,500 lbs. 23'10.6" 7,450 lbs. 12.5/70-16 8-ply Load Sensing Transmission 1 Forward/ 1 Reverse 0 to 12.5 mph 0 to 3.1 mph Enclosed, Self Adjusting Wet Disc Spring Applied, Hydraulic Released Wet Disc 19.2 gpm @ 4,970 psi 11.1 gpm @ 2,700 psi 4.5 gpm @ 285 psi 11.1 gpm front and rear 14.3 gal. 15.9 gal. 11.1 gal.
Specifications subject to change without notice. For your safety, ROPS with a seatbelt is strongly recommended by Kubota in almost all applications.
R D
F
R420S
H
A
E
G
M
N
K I
J
O
B
C
A
BACKHOE SPECIFICATIONS MODEL Reach from centerline of swing pivot Overall operating height Loading height Digging depth (2' flat bottom) Digging depth (Maximum) Side shift (Each way) Digging force bucket Digging force dipperstick cylinder
L
R420S/RBK4009S A B C D E -
145.7" 126.8" 80.3" 107.3" 108.3" 19.5" 4,100 lbs. 2,755 lbs.
B C
D E