Itugrid Inhalt Cwdm V002

  • April 2020
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Itugrid Inhalt Cwdm V002 as PDF for free.

More details

  • Words: 324
  • Pages: 1
COLOR-Cubes

ITU Grid > Coarse WDM Reference Table Coarse Wavelength Division Multiplexing (CWDM), a WDM technology, is characterized by wider channel spacing than Dense WDM (DWDM) as defined in ITU-T Rec. G.671. CWDM systems can realize costeffective applications, through a combination of uncooled lasers, relaxed laser wavelength selection tolerances and wide pass-band filters. CWDM systems can be used in transport networks in metropolitan areas for a variety of clients, services and protocols. Nominal central wavelengths for coarse WDM systems The CWDM grid wavelengths within the range 1270 nm to 1610 nm are shown below. The value of "c" (speed of light in vacuum) that should be used for converting between wavelength and frequency is 2.99792458 x 108 m/s. ITU G.694.2 - Nominal central wavelengths Nominal central wavelengths (nm) for spacing of 20nm 1270 1290 1310 1330 1350 1370 1390 1410 1430 1450 1470 1490 1510 1530 1550 1570 1590 1610

Central wavelength spacing and wavelength variation Effective CWDM realizations with uncooled lasers and wide passband filters a nominal central wavelength spacing of not less than 20 nm. Total source wavelength variation of the order of ± 6-7 nm is expected to be compatible with current filter technologies. As for the guard-band, one third of the minimum channel spacing is sufficient. Therefore, in order to maximise the number of channels, 20 nm has been chosen. Specific values and allocations of this variation will be defined in individual applications. The wavelength variation is determined by mainly two factors. First, the laser manufacturer is allowed a wavelength variation around the nominal wavelength in order to achieve a higher yield and/or relax fabrication tolerances. Second, the use of uncooled lasers will cause the wavelength to change with temperature within the specified temperature range of the laser.

Corporate Office: Cube Optics AG Robert-Koch-Strasse 30 55129 Mainz Germany Fon: + 49 - 61 31/ 6 98 51- 0 Fax: + 49 - 61 31/ 6 98 51- 79 e.mail: [email protected]

Related Documents

Inhalt
November 2019 2
Inhalt
October 2019 0
0 Inhalt
November 2019 2
What Is Cwdm
May 2020 0