Waco Regional Airport ● P.O. Box 5500 ● Waco, Texas 76708
Beechcraft King Air 200 & 300 Series Airplanes
ILLUSTRATED PARTS CATALOG
IPC Manual No. 26012-40 Initial Release October 5, 2018
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
RECORD OF REVISIONS Rev. No.
Date Inserted
By
Rev. No.
Date Inserted
By
Rev. No.
Date Inserted
By
When a revision to this manual is issued, insert the revised or added pages into the manual. Record the revision number, date inserted, and the initials of the person responsible for the update on this page.
MANUAL No. 26012-40
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
REVISION LOG Rev. No.
Rev. Date
MANUAL No. 26012-40
Change Description
Page(s) Affected
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
INTRODUCTION SCOPE This Illustrated Parts Catalog (IPC) provides an illustrated list of the equipment installed under STC SA11142SC for Beechcraft King Air 200 & 300 series aircraft. The information contained herein should be used as reference only to help with ordering replacement parts when necessary. The STC drawings contain the FAA approved data and may supersede the information in the parts lists until this IPC is updated to reflect the latest drawings.
FORMAT The IPC is divided into the following chapters: CHAPTER
TITLE
11
PLACARDS AND MARKINGS
28
FUEL
52
DOORS
54
NACELLES/PYLONS
Each chapter is broken down into systems, installations, assemblies, and detail parts similar to the format used in the Beechcraft IPC. The example on the next page shows the basic format. The following terms used in the parts lists are defined below. ITEM – the item number in the parts list corresponds to the item number in the illustration. PART NUMBER – lists the part number of the item. The number can be a CenTex Aerospace (CTA) part number, a vendor number, or a mil-spec number. NOMENCLATURE – name of the part and if it is a detail part, an assembly or installation. EFFECTIVITY – if listed, the serial numbers of the aircraft eligible for the specific part installation. If the parts are eligible for installation on all serial number airplanes, the column is left blank. UNITS/ASSY – quantity of the parts used for the next higher assembly of the part. Quantity of “ATTACHING PARTS” is typically the number of parts required to attach one unit of the part they attach.
UPDATES This IPC and any subsequent revisions are available on the following website: www.centex.aero/documents. Changes to the IPC will be identified by revision number and date in the Revision Log.
ASSISTANCE For assistance with parts or any other issues related to this STC, contact CenTex Aerospace at the following address or telephone number. CenTex Aerospace Inc. 7925 Karl May Drive Waco, Texas 76708 (254) 752-4290 http://www.centex.aero/
MANUAL No. 26012-40
PAGE 1 10/05/18
B
A
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
EXAMPLE The example shows how parts are illustrated and listed by installation, assembly, etc. 1
A
ITEM
1 2
PART NUMBER
EFFECTIVITY
UNITS/ ASSY
26012-2000-1 26012-2000-2
INSTALLATION, SADDLE TANK, LH INSTALLATION, SADDLE TANK, RH
1 1
26012-2001-1 26012-2001-2 26012-2008-1 26012-2008-2
. SADDLE TANK ASSEMBLY, LH (95-GAL) . SADDLE TANK ASSEMBLY, RH (95-GAL) . MOUNT ASSEMBLY, LH . MOUNT ASSEMBLY, RH ATTACHING PARTS . SCREW . BOLT . NUT PLATE -------*------. SHIM ATTACHING PARTS . RIVET -------*------. CHAFING STRIP (OPTIONAL) . SEAL
1 1 1 1
3
MS27039-0810 AN3-5A MS21059L3
4
26012-2008-4 CR3213-4-02
5 6
NOMENCLATURE 123
26012-2008-13 WR8988
MANUAL No. 26012-40
INTRODUCTION
13 12 12 1 2 1 2
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
CHAPTER 11 PLACARDS AND MARKINGS TABLE OF CONTENTS
CHAPTER SECTION
FIGURE
PLACARDS, ST190 (95 GALLON TANKS)
11-10
00
PLACARDS, ST120 (60 GALLON TANKS)
11-10
01
PLACARDS, ST72 (36 GALLON TANKS)
11-10
02
SUBJECT
EFFECTIVITY
SADDLE TANK PLACARDS
MANUAL No. 26012-40
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
11-10-00 PLACARDS ST190 (95 GALLON TANKS)
MANUAL No. 26012-40
11-10-00
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
11-10-00
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
A
1 2
B
2 1
A
FIGURE 10-00 - PLACARDS, ST190 SHEET 1 OF 3
MANUAL No. 26012-40
11-10-00
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
5 4
3
3
4
5
B
FIGURE 10-00 - PLACARDS, ST190 SHEET 2 OF 3
MANUAL No. 26012-40
11-10-00
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
C
6
C
FIGURE 10-00 - PLACARDS, ST190 SHEET 3 OF 3
MANUAL No. 26012-40
11-10-00
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
11-10-00
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-7000-1
1 2 3 4 5 6
26012-7001-1 26012-7001-3 26005-7001-4 26005-7001-4 26005-7001-4 26012-7001-2
NOMENCLATURE 123 INSTALLATION, PLACARDS (95 GALLON TANKS) . PLACARD, “SADDLE TANK FUEL” . PLACARD, “CAUTION” . PLACARD, “FUEL DRAIN”, TANK SUMP . PLACARD, “FUEL DRAIN”, FUEL LINE . PLACARD, “FUEL DRAIN”, VENT LINE PLACARD, “SADDLE TANKS QTY (LBS)”
EFFECTIVITY
UNITS/ ASSY 1 2 2 2 2 2 1
“END”
MANUAL No. 26012-40
11-10-00
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
11-10-00
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
11-10-01 PLACARDS ST120 (60 GALLON TANKS)
MANUAL No. 26012-40
11-10-01
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
11-10-01
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
A
1 2
B
2 1
A
FIGURE 10-01 - PLACARDS, ST120 SHEET 1 OF 3
MANUAL No. 26012-40
11-10-01
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
5 4
3
3
4
5
B
FIGURE 10-01 - PLACARDS, ST120 SHEET 2 OF 3
MANUAL No. 26012-40
11-10-01
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
D D
C
7
6
C
D
FIGURE 10-01 - PLACARDS, ST120 SHEET 3 OF 3
MANUAL No. 26012-40
11-10-01
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
11-10-01
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-7000-2
1 2 3 4 5 6 7
045-7101-1 26012-7001-3 26005-7001-4 26005-7001-4 26005-7001-4 045-7101-2 045-7101-3
NOMENCLATURE 123 INSTALLATION, PLACARDS (60 GALLON TANKS) . PLACARD, “SADDLE TANK FUEL” . PLACARD, “CAUTION” . PLACARD, “FUEL DRAIN”, TANK SUMP . PLACARD, “FUEL DRAIN”, FUEL LINE . PLACARD, “FUEL DRAIN”, VENT LINE PLACARD, “SADDLE TANKS QTY (LBS)” PLACARD, “COMBINED WEIGHT OF CARGO”
EFFECTIVITY
UNITS/ ASSY 1 2 2 2 2 2 1 2
“END”
MANUAL No. 26012-40
11-10-01
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
11-10-01
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
11-10-02 PLACARDS ST72 (36 GALLON TANKS)
MANUAL No. 26012-40
11-10-02
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
11-10-02
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
A
1 2
B
2 1
A
FIGURE 10-02 - PLACARDS, ST72 SHEET 1 OF 3
MANUAL No. 26012-40
11-10-02
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
5 4
3
3
4
5
B
FIGURE 10-02 - PLACARDS, ST72 SHEET 2 OF 3
MANUAL No. 26012-40
11-10-02
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
D D
C
7
6
C
D
FIGURE 10-02 - PLACARDS, ST72 SHEET 3 OF 3
MANUAL No. 26012-40
11-10-02
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
11-10-02
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-7000-3
1 2 3 4 5 6 7
045-7201-1 26012-7001-3 26005-7001-4 26005-7001-4 26005-7001-4 045-7201-2 045-7201-3
NOMENCLATURE 123 INSTALLATION, PLACARDS (36 GALLON TANKS) . PLACARD, “SADDLE TANK FUEL” . PLACARD, “CAUTION” . PLACARD, “FUEL DRAIN”, TANK SUMP . PLACARD, “FUEL DRAIN”, FUEL LINE . PLACARD, “FUEL DRAIN”, VENT LINE PLACARD, “SADDLE TANKS QTY (LBS)” PLACARD, “COMBINED WEIGHT OF CARGO”
EFFECTIVITY
UNITS/ ASSY 1 2 2 2 2 2 1 2
“END”
MANUAL No. 26012-40
11-10-02
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
11-10-02
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
CHAPTER 28 FUEL TABLE OF CONTENTS
CHAPTER SECTION
FIGURE
SADDLE TANKS INSTALLATION, ST190 (95 GALLON TANKS)
28-10
10
SADDLE TANKS INSTALLATION, ST120/ST72 (60 GALLON TANKS) (36 GALLON TANKS)
28-10
11
SADDLE TANKS REMOVED CONFIGURATION (REVISED VENTILATION SYSTEM)
28-15
10
SADDLE TANKS REMOVED CONFIGURATION (ORIGINAL VENTILATION SYSTEM)
28-15
11
BB-1239, FL-31, FL-129, FL-241
SADDLE TANKS REMOVED CONFIGURATION (BL-7)
28-15
12
BL-7
FUEL SYSTEM INSTALLATION, ST190 (95 GALLON TANKS)
28-20
10
FUEL SYSTEM INSTALLATION, ST190 (95 GALLON TANKS) (BL-7)
28-20
11
BL-7
FUEL SYSTEM INSTALLATION, ST190 (95 GALLON TANKS) (FL-31/-129/-241)
28-20
12
FL-31, FL-129, FL-241
FUEL SYSTEM INSTALLATION, ST120 (60 GALLON TANKS)
28-20
13
FUEL SYSTEM INSTALLATION, ST120 (60 GALLON TANKS) (FM-3)
28-20
14
SUBJECT
EFFECTIVITY
FUEL STORAGE
FUEL DISTRIBUTION & VENTILATION
MANUAL No. 26012-40
FM-3
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
CHAPTER SECTION
FIGURE
FUEL SYSTEM INSTALLATION, ST72 (36 GALLON TANKS)
28-20
15
FUEL SYSTEM INSTALLATION, ST72 (36 GALLON TANKS) (BB-1239)
28-20
16
FUEL LEVEL INDICATION, ST190 (95 GALLON TANKS)
28-40
10
FUEL LEVEL INDICATION, ST120 (60 GALLON TANKS)
28-40
11
FUEL LEVEL INDICATION, ST72 (36 GALLON TANKS)
28-40
12
SUBJECT
EFFECTIVITY
FUEL DISTRIBUTION & VENTILATION
BB-1239
FUEL LEVEL INDICATION
MANUAL No. 26012-40
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-10-10 SADDLE TANKS INSTALLATION ST190 (95 GALLON TANKS)
MANUAL No. 26012-40
28-10-10
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-10-10
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
C
A
1
B
A FIGURE 10-10 - SADDLE TANKS INSTALLATION, ST190 SHEET 1 OF 4
MANUAL No. 26012-40
28-10-10
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
B
FIGURE 10-10 - SADDLE TANKS INSTALLATION, ST190 SHEET 2 OF 4
MANUAL No. 26012-40
28-10-10
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
27 27 26
26
UPPER WING SKIN 19 22 23 25 24 16 31
20
21
32 17
28
18 29 30 REAR SPAR (REF)
C
FIGURE 10-10 - SADDLE TANKS INSTALLATION, ST190 SHEET 3 OF 4
MANUAL No. 26012-40
28-10-10
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
D
35
35
33
34
D
FIGURE 10-10 - SADDLE TANKS INSTALLATION, ST190 SHEET 4 OF 4
MANUAL No. 26012-40
28-10-10
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-2000-1 26012-2000-2
1 2
26012-2001-1 26012-2001-2 26012-2004-3 MS24694-S53 MS24694-C53
3
4 5
101-381005-15 39051-3 457-504-1 457-504 26005-2007-6 26012-2013-10
6 7
MS27039-0807 MS24694-S4
8
26012-2004-1 26005-2009-5 AN3H6A NAS1149F0363P MS35333-39
9
26012-2004-2 26005-2009-6 AN3H6A NAS1149F0363P MS35333-39
10
SA5817-4C MS35333-47
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, SADDLE TANK, LH (95-GAL. TANK) INSTALLATION, SADDLE TANK, RH (95-GAL. TANK) . SADDLE TANK, 95-GAL., LH . SADDLE TANK, 95-GAL., RH . . ACCESS PANEL ATTACHING PARTS . . SCREW . . SCREW (ALTERNATE) -------*------. . FUEL CAP ASSEMBLY . . FUEL CAP ASSEMBLY (ALTERNATE) . . FUEL CAP ASSEMBLY (ALTERNATE) . . FUEL CAP ASSEMBLY (ALTERNATE) . . SHIM . . COVER PLATE ATTACHING PARTS . . SCREW . . SCREW -------*------. . ACCESS PANEL ATTACHING PARTS . . GASKET SEAL . . BOLT . . WASHER . . LOCK WASHER (ALTERNATE FOR SAFETY WIRE) -------*------. . ACCESS PANEL ATTACHING PARTS . . GASKET SEAL . . BOLT . . WASHER . . LOCK WASHER (ALTERNATE FOR SAFETY WIRE) -------*------. . FUEL DRAIN VALVE ATTACHING PARTS . . LOCK WASHER
28-10-10
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 2 24 24 1 1 1 1 1 1 10 8 1 1 22 22 22
1 1 20 20 20
1 1
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER AN924-8D
11
12
13
26012-2008-1 26012-2008-2 MS27039-0810 AN3-5A NAS1149F0332P MS21059L3 13100000-2 13100000-4 26012-2008-9 26012-2008-10 26012-2008-11 26012-2008-12 26012-2008-4 CR3213-4-02 6RX3/8THA
14 15 16 17 18 19 20 21 22 23 24
25
26012-2008-13 WR8988 26012-2011-1 26012-2011-2 26012-2011-19 26012-2011-20 26012-2011-3 26012-2011-4 26012-2011-5 26012-2011-6 26012-2011-8 26012-2011-9 26012-2011-10 26012-2011-16 26012-2011-18 26012-2011-17 26012-2011-11 26012-2011-12
MANUAL No. 26012-40
NOMENCLATURE 123 . . NUT -------*------. MOUNT ASSEMBLY, LH . MOUNT ASSEMBLY, RH ATTACHING PARTS . SCREW . BOLT . WASHER (OPTIONAL) . NUT PLATE . CLIP NUT (ALTERNATE) . CLIP NUT (ALTERNATE) -------*------. CLIP . CLIP . BRACKET, LEFT . BRACKET, RIGHT . SHIM ATTACHING PARTS . RIVET . SCREW (ALTERNATE) -------*------. CHAFING STRIP (OPTIONAL) . SEAL . MOUNT PLATE . SHIM . GUSSET, LH, OUTB’D . GUSSET, RH, OUTB’D . MOUNT PLATE . SHIM . GUSSET, LH, INB’D . GUSSET, RH, INB’D . SHIM . MOUNT PLATE, LH . MOUNT PLATE, RH . SHIM, OUTB’D . SHIM (CENTER) . SHIM, INB’D . STIFFENER, OUTB’D, LH . STIFFENER, OUTB’D, RH
28-10-10
EFFECTIVITY
UNITS/ ASSY 1 1 1 13 12 12 12 12 12 1 1 1 1 1 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
26 27
PART NUMBER 26012-2011-15 26012-2011-13 26012-2011-14 26012-2011-7 26012-2012-1 CR3213-4-03
28 29 30 31 32 33 34 35
26012-2012-2 26012-2012-1 AN4-11A AN970-4 AN4H12A 26012-4001-1 26012-4001-2 MS21266-2N 26012-4022-1
NOMENCLATURE 123 . STIFFENER (CENTER) . STIFFENER, INB’D, LH . STIFFENER, INB’D, RH . CHAFING STRIP . PLATE ASSEMBLY ATTACHING PARTS . RIVET -------*------. WASHER . LOCK TAB . BOLT . WASHER . BOLT . DOUBLER (WITH PILOT HOLES) . DOUBLER (W/O PILOT HOLES) (ALT.) . GROMMET . DOUBLER
EFFECTIVITY
UNITS/ ASSY 1 1 1 5 5 2 2 2 2 3 3 1 1 1 2
“END”
MANUAL No. 26012-40
28-10-10
PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-10-10
PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-10-11 SADDLE TANKS INSTALLATION ST120 (60 GALLON TANKS) ST72 (36 GALLON TANKS)
MANUAL No. 26012-40
28-10-11
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-10-11
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
C
A
2
1
B
A FIGURE 10-11 - SADDLE TANKS INSTALLATION, ST120/ST72 SHEET 1 OF 4
MANUAL No. 26012-40
28-10-11
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
B
FIGURE 10-11 - SADDLE TANKS INSTALLATION, ST120/ST72 SHEET 2 OF 4
MANUAL No. 26012-40
28-10-11
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
23 23 22
22
UPPER WING SKIN 15 18 19 21 20 12 27
16
17
28 13
24
14 25 26 REAR SPAR (REF)
C
FIGURE 10-11 - SADDLE TANKS INSTALLATION, ST120/ST72 SHEET 3 OF 4
MANUAL No. 26012-40
28-10-11
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
D
31
31
29
30
D
FIGURE 10-11 - SADDLE TANKS INSTALLATION, ST120/ST72 SHEET 4 OF 4
MANUAL No. 26012-40
28-10-11
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-2000-3
NOMENCLATURE 123 INSTALLATION, SADDLE TANK PLUS, LH (60-GAL. TANK)
EFFECTIVITY
UNITS/ ASSY 1
26012-2000-4
INSTALLATION, SADDLE TANK PLUS, RH (60-GAL. TANK)
1
26012-2000-5
INSTALLATION, SADDLE TANK PLUS, LH (36-GAL. TANK)
1
26012-2000-6
INSTALLATION, SADDLE TANK PLUS, RH (36-GAL. TANK)
1
1
045-2101-1 045-2101-2 045-2201-1 045-2201-2
. SADDLE TANK PLUS, 60-GAL., LH . SADDLE TANK PLUS, 60-GAL., RH . SADDLE TANK PLUS, 36-GAL., LH . SADDLE TANK PLUS, 36-GAL., RH
1 1 1 1
2
SEE CH. 52
. . DOOR ASSEMBLY, STORAGE COMPARTMENT
1
3
26012-2004-3 26012-2004-3
. . ACCESS PANEL (60-GAL. TANK) . . ACCESS PANEL (36-GAL. TANK) ATTACHING PARTS . . SCREW . . SCREW (ALTERNATE) -------*------. . FUEL CAP ASSEMBLY . . FUEL CAP ASSEMBLY (ALTERNATE) . . FUEL CAP ASSEMBLY (ALTERNATE) . . FUEL CAP ASSEMBLY (ALTERNATE) . . SHIM . . ACCESS PANEL (60-GAL. TANK) ATTACHING PARTS . . GASKET SEAL . . BOLT . . WASHER . . LOCK WASHER (ALTERNATE FOR SAFETY WIRE) -------*------. MOUNT ASSEMBLY, LH . MOUNT ASSEMBLY, RH ATTACHING PARTS . SCREW . BOLT . WASHER (OPTIONAL) . NUT PLATE
2 1
MS24694-S53 MS24694-C53 4
5 6
101-381005-15 39051-3 457-504-1 457-504 26005-2007-6 26005-2009-9 26005-2009-5 AN3H6A NAS1149F0363P MS35333-39
7
8
26012-2008-1 26012-2008-2 MS27039-0810 AN3-5A NAS1149F0332P MS21059L3
MANUAL No. 26012-40
28-10-11
24 24 1 1 1 1 1 1 1 22 22 22
1 1 13 12 12 12
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 13100000-2 13100000-4
9
26012-2008-9 26012-2008-10 26012-2008-11 26012-2008-12 26012-2008-4 CR3213-4-02 6RX3/8THA
10 11 12 13 14 15 16 17 18 19 20
21
22 23
26012-2008-13 WR8988 26012-2011-1 26012-2011-2 26012-2011-19 26012-2011-20 26012-2011-3 26012-2011-4 26012-2011-5 26012-2011-6 26012-2011-8 26012-2011-9 26012-2011-10 26012-2011-16 26012-2011-18 26012-2011-17 26012-2011-11 26012-2011-12 26012-2011-15 26012-2011-13 26012-2011-14 26012-2011-7 26012-2012-1 CR3213-4-03
24
26012-2012-2
MANUAL No. 26012-40
NOMENCLATURE 123 . CLIP NUT (ALTERNATE) . CLIP NUT (ALTERNATE) -------*------. CLIP . CLIP . BRACKET, LEFT . BRACKET, RIGHT . SHIM ATTACHING PARTS . RIVET . SCREW (ALTERNATE) -------*------. CHAFING STRIP (OPTIONAL) . SEAL . MOUNT PLATE . SHIM . GUSSET, LH, OUTB’D . GUSSET, RH, OUTB’D . MOUNT PLATE . SHIM . GUSSET, LH, INB’D . GUSSET, RH, INB’D . SHIM . MOUNT PLATE, LH . MOUNT PLATE, RH . SHIM, OUTB’D . SHIM (CENTER) . SHIM, INB’D . STIFFENER, OUTB’D, LH . STIFFENER, OUTB’D, RH . STIFFENER (CENTER) . STIFFENER, INB’D, LH . STIFFENER, INB’D, RH . CHAFING STRIP . PLATE ASSEMBLY ATTACHING PARTS . RIVET -------*------. WASHER
28-10-11
EFFECTIVITY
UNITS/ ASSY 12 12 1 1 1 1 1 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 5 2 2
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 25 26 27 28 29 30 31
PART NUMBER 26012-2012-1 AN4-11A AN970-4 AN4H12A 045-2117-1 045-2117-2 MS21266-2N 26012-4022-1
NOMENCLATURE 123 . LOCK TAB . BOLT . WASHER . BOLT . DOUBLER (WITH PILOT HOLES) . DOUBLER (W/O PILOT HOLES) (ALT.) . GROMMET . DOUBLER
EFFECTIVITY
UNITS/ ASSY 2 2 3 3 1 1 1 2
“END”
MANUAL No. 26012-40
28-10-11
PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-10-11
PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-15-10 SADDLE TANKS REMOVED CONFIGURATION (REVISED VENTILATION SYSTEM)
MANUAL No. 26012-40
28-15-10
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-15-10
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
A
B
B 1
17
A
19 18
2
3
B FIGURE 15-10 - SADDLE TANKS REMOVED CONFIGURATION (REVISED) SHEET 1 OF 2
MANUAL No. 26012-40
28-15-10
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
22
20 21
C
5
14 15
14
15 16
C FIGURE 15-10 - SADDLE TANKS REMOVED CONFIGURATION (REVISED) SHEET 2 OF 2
MANUAL No. 26012-40
28-15-10
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
1 2 3 4 5
6 7
PART NUMBER 26012-8000-1 26012-8000-2 26005-7002-1 26012-8002-1 26012-8003-1 26012-8003-3 MS21919WDG4 MS27039-1-07 MS21044N3 MS21919WDG4 MS21919DWG8 MS27039-1-08 MS21044N3
8 9
26012-8005-1 26012-8004-1
10
MS21919WDG8 MS27039-1-08 MS21044N3
11 12
AN821-8D MS25083-2BB6 AN735D4 AN735D8 MS27039-1-07 MS21044N3
13
AN4-6A AN525-416R12 AN970-4 MS21045L4
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, 95-GAL. TANKS INSTALLATION, 60-GAL./36-GAL. TANKS . PLACARD, “SADDLE TANKS REMOVED” . PATCH PLATE ASSEMBLY . TUBE ASSEMBLY . TUBE ASSEMBLY ATTACHING PARTS . CLAMP (LH ONLY) . SCREW (LH ONLY) . NUT (LH ONLY) . CLAMP . CLAMP . SCREW . NUT -------*------. ELBOW ASEMBLY . TUBE ASSEMBLY ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. ELBOW . BONDING STRAP ATTACHING PARTS . CLAMP . CLAMP . SCREW . NUT -------*------. BOLT . SCREW (ALTERNATE) ATTACHING PARTS . WASHER . NUT -------*-------
28-15-10
EFFECTIVITY
UNITS/ ASSY 1 1 1 2 2 2 1 1 1 2 2 2 2 2 2 4 4 4 2 4 2 2 4 4 10 10 10 10
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 14
PART NUMBER 26012-8001-1 26012-8002-4
15 16 17 18
AN806-D10 AN806-D4 SEE CH. 28-40 AN815-4D MS21919WDG4 AN743-12 NAS43DD3-30FC MS27039-1-14 MS27039-1-07 NAS1149F0332P MS21042L3 MS21044N3
19 20
AN526-632R7 101-980021-9 101-980021-10
21
MS24693-S50 MS21044N08 NAS1330-A08-106 MS24693-S272
22
NOMENCLATURE 123 . PATCH PLATE ASSEMBLY (95-GAL. TANKS) . PATCH PLATE ASSEMBLY (60-GAL./36GAL. TANKS) . PLUG . PLUG (60-GAL./36-GAL. TANKS) INDICATOR, FUEL LEVEL (REF.) UNION ATTACHING PARTS CLAMP BRACKET (RH ONLY) SPACER (RH ONLY) SCREW (RH ONLY) SCREW WASHER (RH ONLY) NUT (RH ONLY) NUT (LH ONLY) -------*------SCREW COVER ASSY., ACCESS, LH (REF.) COVER ASSY., ACCESS, RH (REF.) ATTACHING PARTS . SCREW . NUT . RIVNUT (ALTERNATE) . SCREW -------*-------
EFFECTIVITY
UNITS/ ASSY 2 2 2 2 1 4 2 1 1 1 2 2 2 1 12 1 1 32 32 32 24
“END”
MANUAL No. 26012-40
28-15-10
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-15-11 SADDLE TANKS REMOVED CONFIGURATION (ORIGINAL VENTILATION SYSTEM)
MANUAL No. 26012-40
28-15-11
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-15-11
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
A
1
10
A
FIGURE 15-11 - SADDLE TANKS REMOVED CONFIGURATION (ORIGINAL) SHEET 1 OF 2
MANUAL No. 26012-40
28-15-11
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
13
11 12
B
4
7 8
7
8 9
B FIGURE 15-11 - SADDLE TANKS REMOVED CONFIGURATION (ORIGINAL) SHEET 2 OF 2
MANUAL No. 26012-40
28-15-11
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-8000-1
1 2 3
26012-8000-2 26005-7002-1 AN821-8D 26012-8004-1
4
MS21919WDG8 MS27039-1-08 MS21044N3
5
MS25083-2BB6 AN735D8 MS27039-1-07 MS21044N3
6
AN4-6A AN525-416R12 AN970-4 MS21045L4
7
26012-8001-1 26012-8002-4
8 9 10 11
AN806D10 AN806D4 SEE CH. 28-40 101-980021-9 101-980021-10
12
MS24693-S50 MS21044N08 NAS1330-A08-106 MS24693-S272
13
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, 95-GAL. TANKS INSTALLATION, 60-GAL./36-GAL. TANKS . PLACARD, “SADDLE TANKS REMOVED” . ELBOW . TUBE ASSEMBLY ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. BOLT . SCREW (ALTERNATE) ATTACHING PARTS . WASHER . NUT -------*------. PATCH PLATE ASSEMBLY (95-GAL. TANKS) . PATCH PLATE ASSEMBLY (60-GAL./36GAL. TANKS) . PLUG . PLUG (60-GAL./36-GAL. TANKS) INDICATOR, FUEL LEVEL (REF.) COVER ASSY., ACCESS, LH (REF.) COVER ASSY., ACCESS, RH (REF.) ATTACHING PARTS . SCREW . NUT . RIVNUT (ALTERNATE) . SCREW -------*------“END”
28-15-11
EFFECTIVITY FL-31/-129/ -241 BB-1239
UNITS/ ASSY 1 1 1 4 2 4 4 4 2 2 2 2 10 10 10 10
FL-31/-129/ -241 BB-1239
BB-1239
2 2 2 2 1 1 1 32 32 32 24
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-15-11
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-15-12 SADDLE TANKS REMOVED CONFIGURATION (S/N BL-7)
MANUAL No. 26012-40
28-15-12
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-15-12
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
8
1
A
A
11
B 9 10
3 6 7
B FIGURE 15-12 - SADDLE TANKS REMOVED CONFIGURATION (S/N BL-7) MANUAL No. 26012-40
28-15-12
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-15-12
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 1 2
PART NUMBER 26012-8000-1 26005-7002-1 AN4-6A AN525-416R12 AN970-4 MS21045L4
3
26012-8001-4
4
26012-4012-1 M6000-10 QS200-16H
5
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
6 7 8 9
26012-8001-1 AN806D10 26012-6001-1 101-980021-9 101-980021-10
10
MS24693-S50 MS21044N08 NAS1330-A08-106 MS24693-S272
11
NOMENCLATURE 123 INSTALLATION, 95-GAL. TANKS . PLACARD, “SADDLE TANKS REMOVED” . BOLT . SCREW (ALTERNATE) ATTACHING PARTS . WASHER . NUT -------*------. TUBE ATTACHING PARTS . HOSE . HOSE (ALTERNATE) . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. PATCH PLATE ASSEMBLY . PLUG INDICATOR, FUEL LEVEL (REF.) COVER ASSY., ACCESS, LH (REF.) COVER ASSY., ACCESS, RH (REF.) ATTACHING PARTS . SCREW . NUT . RIVNUT (ALTERNATE) . SCREW -------*-------
EFFECTIVITY BL-7
UNITS/ ASSY 1 1 10 10 10 10 4 2 2 4 2 4 4 4 2 2 1 1 1 32 32 32 24
“END”
MANUAL No. 26012-40
28-15-12
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-15-12
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-20-10 FUEL SYSTEM INSTALLATION ST190 (95 GALLON TANKS)
MANUAL No. 26012-40
28-20-10
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-10
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
B
A 1 2 21
3
20
4
19
5
18 17 10
7
16
6
8
15 14 9 13
22
12
11
23
A FIGURE 20-10 - FUEL SYSTEM INSTALLATION, ST190 SHEET 1 OF 4
MANUAL No. 26012-40
28-20-10
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
24 25 41 26 40
27
39 28 38 37 36
30
35
34 29 33 42
32
31
43
B
FIGURE 20-10 - FUEL SYSTEM INSTALLATION, ST190 SHEET 2 OF 4
MANUAL No. 26012-40
28-20-10
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
73
C
57
45 47 53 48 56
49
50 51 52
D
54 55
C
44 46
FIGURE 20-10 - FUEL SYSTEM INSTALLATION, ST190 SHEET 3 OF 4
MANUAL No. 26012-40
28-20-10
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
58 59 60 D
E
E
D 62
63 65
66 67 69
70 71
61 64
68
E
72
FIGURE 20-10 - FUEL SYSTEM INSTALLATION, ST190 SHEET 4 OF 4
MANUAL No. 26012-40
28-20-10
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-4000-1 26012-4000-2
1 2
26012-4002-1 26012-4002-3 MS21919WCH10 87548 MS27039-1-15 MS21044N3
3 4 5
26012-4006-1 11-01400 26012-4012-1 200-16H
6
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
7
26012-4018-1 AN743-12 MS21919WDG10 MS27039-1-07 MS21044N3
8 9
26012-4014-1 87558 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-18 MS21044N3
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, FUEL SYSTEM, LH (95-GAL. TANK) INSTALLATION, FUEL SYSTEM, RH (95-GAL. TANK) . FUEL CELL, MODIFIED, LH (CLIP) . FUEL CELL, MODIFIED, LH (VELCRO) . CLAMP ATTACHING PARTS . STAND-OFF . SCREW . NUT -------*------. TUBE . HEAT SHRINK TUBING . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. BRACKET ATTACHING PARTS . BRACKET . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY . STAND-OFF ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT
28-20-10
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 2 1 1 1 1 1 1 2 1 2 2 2 1 1 1 2 2 1 1 1 1 1 1 1 2
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 10 11
PART NUMBER 26012-4023-1 SA5817-4C MS35333-47 AN924-8D
12 13 14 15 16 17
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S 26005-4005-1 MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
18
26012-4012-1 200-16H
19 20 21 22
26012-4011-1 MS21266-2N 200-16H 26012-4007-1
23
MS27039-0805
24
26012-4002-2 26012-4002-4 MS21919WCH10
25
NAS1149F0363P MS27039-1-08 MS21044N3 26 27 28
26012-4010-1 26012-4017-1 11-01400
MANUAL No. 26012-40
NOMENCLATURE 123 -------*------. TUBE ASSEMBLY, LH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . SCREEN ASSEMBLY . BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, LH ATTACHING PARTS . SCREW -------*------. FUEL CELL, MODIFIED, RH (CLIP) . FUEL CELL, MODIFIED, RH (VELCRO) . CLAMP ATTACHING PARTS . WASHER . SCREW . NUT -------*------. TUBE . CHAFING STRIP . HEAT SHRINK TUBING
28-20-10
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 2 1 10 1 1 2 2 1 1 1 1 1
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 29
PART NUMBER 87548 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-14 MS21044N3
30 31
26012-4023-2 SA5817-4C MS35333-47 AN924-8D
32 33 34 35 36 37
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S 26005-4005-1 MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
38
26012-4012-1 200-16H
39 40 41 42
26012-4011-1 MS21266-2N 200-16H 26012-4007-2
43
MS27039-0805
44 45
26012-4024-2 26012-4012-2
MANUAL No. 26012-40
NOMENCLATURE 123 . STAND-OFF ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT -------*------. TUBE ASSEMBLY, RH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . SCREEN ASSEMBLY . BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, RH ATTACHING PARTS . SCREW -------*------. TUBE ASSEMBLY, OUTB’D . HOSE
28-20-10
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 2 1 10 1 1
PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
NOMENCLATURE 123
EFFECTIVITY
UNITS/ ASSY
ATTACHING PARTS 200-10H 46
MS25083-2BB6 AN735D8 MS27039-1-07 MS21044N3
47 48
26012-4024-1 26012-4012-1 200-16H
49
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
50
51 52 53 54
26012-4013-1 26012-4013-2 26012-4021-1 26012-4021-2 26012-4021-3 26012-4021-4 AN815-6D 26012-4027-1 26012-4024-3 26012-4012-1 200-16H
55
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
56
26012-4024-5
MANUAL No. 26012-40
. CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, OUTB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . UNION . TUBE ASSEMBLY . TUBE ASSEMBLY, INB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, INB’D
28-20-10
2 1 2 2 2 1 1 2 1 2 2 2 A A B B C C
1 1 1 1 1 1 1 1 1 1 2 1 2 2 2 1 PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 57 58 59 60
PART NUMBER AN4-6A 26012-4020-1 26012-4020-2 26012-4019-1 SA5817-4C MS35333-47 AN924-8D
61
26012-4029-1 CR3213-4-03 NAS1329A06-75 AN526-632R7
62
-.035W X Ø.25 OD AN818-4D MS20819-4D
63
64 65
66 67 68
MS21919WDG4 MS27039-1-07 NAS1149F0332P MS21044N3 87558 MS21919WDG4 MS27039-1-20 NAS1149F0332P MS35489-7 MS21919WDG4 MS21919WDG8 MS27039-1-08 NAS1149F0332P MS21044N3
69
AN824-4D
MANUAL No. 26012-40
NOMENCLATURE 123 . BOLT . TUBE ASSEMBLY, LH . TUBE ASSEMBLY, RH . DOUBLER . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BRACKET ASSEMBLY ATTACHING PARTS . RIVET . RIVNUT (ALTERNATE) . SCREW (ALTERNATE) ------*------. TUBE ASSY., NACELLE VENT (CUSTOM MAKE PER CTA DWG 26012-4000) . . TUBE (5052-0 ALUMINUM), 34 IN. LG. . . NUT . . SLEEVE ATTACHING PARTS . CLAMP . SCREW . WASHER . NUT . STAND-OFF . CLAMP . SCREW . WASHER ------*------. GROMMET . CLAMP . CLAMP ATTACHING PARTS . SCREW . WASHER . NUT ------*------. TEE
28-20-10
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 6 6 6 1 1 2 2 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1
PAGE 11 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
70
--
71
26012-4029-6 045-2110-0039-1 MS21919WDG4 MS27039-1-06 NAS1149F0332P MS21042L3 AN4-7A
72
--
73
101-920015-15 26012-4026-1
NOMENCLATURE 123 . TUBE ASSY. (101-920015-11), MODIFIED (PER CTA DWG 26012-4000) . TAB ATTACHING PARTS . SPACER . CLAMP . SCREW . WASHER . NUT . BOLT ------*------. TUBE ASSY. (101-920089-5), MODIFIED (PER CTA DWG 26012-4000) . TUBE ASSEMBLY (REF.) STANDPIPE, VENT, TANK, OUTB’D “END”
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1
D
1 1 2
CODES OF EFFECTIVITY A
200: BB-2, BB-6 THRU BB-733, BB-735 THRU BB-792, BB-794 THRU BB-828, BB-830 THRU BB-853, BB-871 THRU BB-873, BB-892, BB-893, BB-912 200C: BL-1 THRU BL-6, BL-8 THRU BL-23, BL-25 THRU BL-36 200CT: BN-1 200T: BT-1 THRU BT-22, BT-28 A200: BC-1 THRU BC-75; BD-1 THUR BD-30 A200C: BJ-1 THRU BJ-66 A200CT: BP-1, BP-22, BP-24 THRU BP-63 B200: BB-734, BB-793, BB-829, BB-854 THRU BB-870, BB-874 THRU BB-891, BB-894, BB-896 THRU BB-911, BB-913 THRU BB-990, BB-992 THRU BB-1157, BB-1159 THRU BB-1166, BB-1168 THRU BB-1192 B200C: BL-37 THRU BL-57, BL-61 THRU BL-72 B200CT: BN-2 THRU BN-4 B200T: BT-23 THRU BT-27, BT-29, BT-30
B
B200: BB-1158, BB-1167, BB-1193 & AFTER B200C: BL-73 & AFTER B200CT: BN-5 & AFTER B200T: BT-31 & AFTER B200GT: BY-1 & AFTER B200CGT: BZ-1 & AFTER 300: FA-146 & AFTER B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
C
300: FA-1 THRU FA-145
D
B200GT: BY-117, BY-121 & AFTER B200CGT: BZ-1 & AFTER 300: FA-1 & AFTER B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
MANUAL No. 26012-40
28-20-10
PAGE 12 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-20-11 FUEL SYSTEM INSTALLATION ST190 (95 GALLON TANKS) (S/N BL-7)
MANUAL No. 26012-40
28-20-11
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-11
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
B
A 1 2 21
3
20
4
19
5
18 17 7
16
6
8
15 14 9 13
22
10 12
23
A
11
FIGURE 20-11 - FUEL SYSTEM INSTALLATION, ST190 (BL-7) SHEET 1 OF 4
MANUAL No. 26012-40
28-20-11
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
24 25 41 26 40
27
39 28 38 37 36 35
34 29 33 30
42
32
43
31
B
FIGURE 20-11 - FUEL SYSTEM INSTALLATION, ST190 (BL-7) SHEET 2 OF 4
MANUAL No. 26012-40
28-20-11
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG 58 57
C
49
FUEL TANK HOUSING ASSY. (REF)
50 51 44
52
45
53
46
54
47
48
D
55 56
C
FIGURE 20-11 - FUEL SYSTEM INSTALLATION, ST190 (BL-7) SHEET 3 OF 4
MANUAL No. 26012-40
28-20-11
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
D
FIGURE 20-11 - FUEL SYSTEM INSTALLATION, ST190 (BL-7) SHEET 4 OF 4
MANUAL No. 26012-40
28-20-11
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-4000-1 26012-4000-2
1 2
26012-4002-1 26012-4002-3 MS21919WCH10 87548 MS27039-1-14 MS21044N3
3 4 5
26012-4006-1 11-01400 26012-4012-1 200-16H
6
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
7
26012-4018-1 AN743-12 MS21919WDG10 MS27039-1-07 MS21044N3
8 9
26012-4014-1 87558 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-18 MS21044N3
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, FUEL SYSTEM, LH (95-GAL. TANK) INSTALLATION, FUEL SYSTEM, RH (95-GAL. TANK) . FUEL CELL, MODIFIED, LH (CLIP) . FUEL CELL, MODIFIED, LH (VELCRO) . CLAMP ATTACHING PARTS . STAND-OFF . SCREW . NUT -------*------. TUBE . HEAT SHRINK TUBING . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. BRACKET ATTACHING PARTS . BRACKET . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY . STAND OFF ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT
28-20-11
BL-7
UNITS/ ASSY 1
BL-7
1
EFFECTIVITY
1 1 2 1 1 1 1 1 1 2 1 2 2 2 1 1 1 2 2 1 1 1 1 1 1 1 2 PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 10 11
PART NUMBER 26012-4016-1 SA5817-4C MS35333-47 AN924-8D
12 13 14 15 16 17
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S 26005-4005-1 MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
18
26012-4012-1 200-16H
19 20 21 22
26012-4011-1 MS21266-2N 200-16H 26012-4007-1
23
MS27039-0805
24
26012-4002-2 26012-4002-4 MS21919WCH10
25
MS27039-1-06 MS21044N3 26 27 28 29
26012-4010-1 26012-4017-1 11-01400 87548
MANUAL No. 26012-40
NOMENCLATURE 123 -------*------. TUBE ASSEMBLY . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . SCREEN ASSEMBLY . BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, LH ATTACHING PARTS . SCREW -------*------. FUEL CELL, MODIFIED, RH (CLIP) . FUEL CELL, MODIFIED, RH (VELCRO) . CLAMP ATTACHING PARTS . SCREW . NUT -------*------. TUBE . CHAFING STRIP . HEAT SHRINK TUBING . STAND OFF
28-20-11
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 2 1 10 1 1 2 1 1 1 1 1 1
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
NOMENCLATURE 123
EFFECTIVITY
UNITS/ ASSY
ATTACHING PARTS MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-14 MS21044N3 30 31
26012-4016-1 SA5817-4C MS35333-47 AN924-8D
32 33 34 35 36 37
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S 26005-4005-1 MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
38
26012-4012-1 200-16H
39 40 41 42
26012-4011-1 MS21266-2N 200-16H 26012-4007-2
43
MS27039-0805
44 45 46
26012-4004-1 MS21266-4N 26012-4012-1
MANUAL No. 26012-40
. CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT -------*------. TUBE ASSEMBLY . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . SCREEN ASSEMBLY . BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, RH ATTACHING PARTS . SCREW -------*------. TUBE ASSEMBLY (LH INB’D, RH OUTB’D) . GROMMET, NYLON EDGE . HOSE ATTACHING PARTS
28-20-11
1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 2 1 10 1 2 1
PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 200-16H
47
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
48 49 50
26012-4013-1 26012-4013-2 AN821-4D MS21919WDG4 MS27039-0808 MS21044N08
51 52 53 54 55
26012-4004-2 26012-4005-1 26012-4005-2 MS21266-4N 26012-4015-1 26012-4015-2 MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
56
26012-4012-1 200-16H
57
26012-4003-1 26012-4003-5
58
AN742D10 MS27039-1-08 MS21044N3
MANUAL No. 26012-40
NOMENCLATURE 123 . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . ELBOW . CLAMP ATTACHING PARTS . SCREW . NUT -------*------. TUBE ASSEMBLY, (LH OUTB’D, RH INB’D) . TUBE ASSEMBLY, LH . TUBE ASSEMBLY, RH . GROMMET, NYLON EDGE . TUBE, AUX. FUEL VENT, LH . TUBE, AUX. FUEL VENT, RH . BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE ASSEMBLY (TANK VENT) . TUBE ASSEMBLY (TANK VENT) (ALT.) ATTACHING PARTS . CLAMP . SCREW . NUT -------*-------
28-20-11
EFFECTIVITY
UNITS/ ASSY 2 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 2 2 2 1 1
PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 59 60 61
PART NUMBER 26012-4020-1 26012-4020-2 26012-4019-1 SA5817-4C MS35333-47 AN924-8D
NOMENCLATURE 123 . TUBE ASSEMBLY, LH . TUBE ASSEMBLY, RH . DOUBLER . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*-------
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1
“END”
MANUAL No. 26012-40
28-20-11
PAGE 11 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-11
PAGE 12 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-20-12 FUEL SYSTEM INSTALLATION ST190 (95 GALLON TANKS) (S/N FL-31, FL-129, FL-241)
MANUAL No. 26012-40
28-20-12
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-12
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
B
A 1 2 21
3
20
4
19
5
18 17 10
7
16
6
8
15 14 9 13
22
12
11
23
A FIGURE 20-12 - FUEL SYSTEM INSTALLATION, ST190 (FL-31/-129/-241) SHEET 1 OF 4
MANUAL No. 26012-40
28-20-12
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
24 25 41 26 40
27
39 28 38 37 36
30
35
34 29 33 42
32
31
43
B
FIGURE 20-12 - FUEL SYSTEM INSTALLATION, ST190 (FL-31/-129/-241) SHEET 2 OF 4
MANUAL No. 26012-40
28-20-12
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
62
63
C
51 52 45
53
47 54
55
48 58
49
50
D
56 57
C
44 46
FIGURE 20-12 - FUEL SYSTEM INSTALLATION, ST190 (FL-31/-129/-241) SHEET 3 OF 4
MANUAL No. 26012-40
28-20-12
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
FIGURE 20-12 - FUEL SYSTEM INSTALLATION, ST190 (FL-31/-129/-241) SHEET 4 OF 4
MANUAL No. 26012-40
28-20-12
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-4000-1 26012-4000-2
1 2
26012-4002-3 MS21919WCH10 87548 MS27039-1-15 MS21044N3
3 4 5
26012-4006-1 11-01400 26012-4012-1 200-16H
6
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
7
26012-4018-1 AN743-12 MS21919WDG10 MS27039-1-07 MS21044N3
8 9
26012-4014-1 87558 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-18 MS21044N3
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, FUEL SYSTEM, LH (95-GAL. TANK) INSTALLATION, FUEL SYSTEM, RH (95-GAL. TANK) . FUEL CELL, MODIFIED, LH (VELCRO) . CLAMP ATTACHING PARTS . STAND-OFF . SCREW . NUT -------*------. TUBE . HEAT SHRINK TUBING . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. BRACKET ATTACHING PARTS . BRACKET . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY . STAND-OFF ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT -------*-------
28-20-12
EFFECTIVITY FL-31, FL-129, FL-241 FL-31, FL-129, FL-241
UNITS/ ASSY 1 1 1 2 1 1 1 1 1 1 2 1 2 2 2 1 1 1 2 2 1 1 1 1 1 1 1 2
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 10 11
PART NUMBER 26012-4023-1 SA5817-4C MS35333-47 AN924-8D
12 13 14 15 16 17
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S 26005-4005-1 MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
18
26012-4012-1 200-16H
19 20 21 22
26012-4011-1 MS21266-2N 200-16H 26012-4007-1
23
MS27039-0805
24 25
26012-4002-4 MS21919WCH10 NAS1149F0363P MS27039-1-08 MS21044N3
26 27 28 29
26012-4010-1 26012-4017-1 11-01400 87548
MANUAL No. 26012-40
NOMENCLATURE 123 . TUBE ASSEMBLY, LH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . SCREEN ASSEMBLY . BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, LH ATTACHING PARTS . SCREW -------*------. FUEL CELL, MODIFIED, RH (VELCRO) . CLAMP ATTACHING PARTS . WASHER . SCREW . NUT -------*------. TUBE . CHAFING STRIP . HEAT SHRINK TUBING . STAND-OFF
28-20-12
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 2 1 10 1 2 2 1 1 1 1 1 1
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
NOMENCLATURE 123
EFFECTIVITY
UNITS/ ASSY
ATTACHING PARTS MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-14 MS21044N3 30 31
26012-4023-2 SA5817-4C MS35333-47 AN924-8D
32 33 34 35 36 37
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S 26005-4005-1 MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
38
26012-4012-1 200-16H
39 40 41 42
26012-4011-1 MS21266-2N 200-16H 26012-4007-2
43
MS27039-0805
44 45
26012-4024-2 26012-4012-2 200-10H
MANUAL No. 26012-40
. CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT -------*------. TUBE ASSEMBLY, RH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . SCREEN ASSEMBLY . BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, RH ATTACHING PARTS . SCREW -------*------. TUBE ASSEMBLY, OUTB’D . HOSE ATTACHING PARTS . CLAMP
28-20-12
1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 2 1 10 1 1 2 PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 46
PART NUMBER MS25083-2BB6 AN735D8 MS27039-1-07 MS21044N3
47 48
26012-4024-1 26012-4012-1 200-16H
49
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
50 51 52
26012-4021-1 26012-4021-2 AN821-4D MS21919WDG4 MS27039-0808 MS21044N08
53 54 55 56
26012-4005-1 26012-4005-2 MS21266-4N 26012-4024-3 26012-4024-4 26012-4012-1 200-16H
57
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
MANUAL No. 26012-40
NOMENCLATURE 123 -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . ELBOW . CLAMP ATTACHING PARTS . SCREW . NUT -------*------. TUBE ASSEMBLY, LH . TUBE ASSEMBLY, RH . GROMMET, NYLON EDGE . TUBE ASSEMBLY, INB’D, LH . TUBE ASSEMBLY, INB’D, RH . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT
28-20-12
EFFECTIVITY
UNITS/ ASSY 1 2 2 2 1 1 2 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 2 2
PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 58 59 60 61
PART NUMBER 26012-4024-5 26012-4020-1 26012-4020-2 26012-4019-1 SA5817-4C MS35333-47 AN924-8D
62 63
26012-4025-1 26012-4025-2 26012-4026-1
NOMENCLATURE 123 -------*------. TUBE ASSEMBLY, INB’D . TUBE ASSEMBLY, LH . TUBE ASSEMBLY, RH . DOUBLER . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------STANDPIPE, VENT, TANK, INB’D, LH STANDPIPE, VENT, TANK, INB’D, RH STANDPIPE, VENT, TANK, OUTB’D
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1
FL-31, FL-241 FL-31, FL-241 FL-31, FL-241
1 1 2
“END”
MANUAL No. 26012-40
28-20-12
PAGE 11 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-12
PAGE 12 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-20-13 FUEL SYSTEM INSTALLATION ST120 (60 GALLON TANKS)
MANUAL No. 26012-40
28-20-13
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-13
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
B
A 1 2 77
23
3
22
4
78 79
21
5
16 17
20 19 10
7
6
8
18
15 14 9 13
24
12
11
25
A FIGURE 20-13 - FUEL SYSTEM INSTALLATION, ST120 SHEET 1 OF 4
MANUAL No. 26012-40
28-20-13
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
26 27 45 78
28
77 44
79
29
43 30
38
42
39
41
32
40
37
36 31 35
46
34
33
47
B
FIGURE 20-13 - FUEL SYSTEM INSTALLATION, ST120 SHEET 2 OF 4
MANUAL No. 26012-40
28-20-13
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
80
C
61
49 51 57 52 60
53
54 55 56
D
58 59
C
48 50
FIGURE 20-13 - FUEL SYSTEM INSTALLATION, ST120 SHEET 3 OF 4
MANUAL No. 26012-40
28-20-13
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
62 63 64 D
E
E
D 66
67 69
70 71 73
75
65 68
72
E
76
FIGURE 20-13 - FUEL SYSTEM INSTALLATION, ST120 SHEET 4 OF 4
MANUAL No. 26012-40
28-20-13
PAGE 6 10/05/18
74
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-4000-3
1 2
1
26012-4002-1 26012-4002-3 MS21919WCH10
. FUEL CELL, MODIFIED, LH (CLIP) . FUEL CELL, MODIFIED, LH (VELCRO) . CLAMP ATTACHING PARTS . STAND-OFF . SCREW . NUT -------*------. TUBE . HEAT SHRINK TUBING . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. BRACKET ATTACHING PARTS . BRACKET . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY . STAND-OFF ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT
1 1 2
26012-4006-1 11-01400 26012-4012-1
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
7
26012-4018-1 AN743-12 MS21919WDG10 MS27039-1-07 MS21044N3
8 9
UNITS/ ASSY 1
INSTALLATION, FUEL SYSTEM, RH (60-GAL. TANK)
200-16H 6
EFFECTIVITY
26012-4000-4
87548 MS27039-1-15 MS21044N3 3 4 5
NOMENCLATURE 123 INSTALLATION, FUEL SYSTEM, LH (60-GAL. TANK)
26012-4014-1 87558 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-18 MS21044N3
MANUAL No. 26012-40
28-20-13
1 1 1 1 1 1 2 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 10 11
PART NUMBER 26012-4023-1 SA5817-4C MS35333-47 AN924-8D
12 13 14 15 16 17 18
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S AN815-4D 045-4104-1 SA5817-4C MS35333-47 AN924-8D
19
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
20
26012-4012-1 200-16H
21 22 23 24
26012-4011-1 MS21266-2N 200-16H 26012-4007-1
25
MS27039-0805
26
26012-4002-2 26012-4002-4 MS21919WCH10
27
NAS1149F0363P
MANUAL No. 26012-40
NOMENCLATURE 123 -------*------. TUBE ASSEMBLY, LH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . UNION . TUBE ASSEMBLY . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, LH ATTACHING PARTS . SCREW -------*------. FUEL CELL, MODIFIED, RH (CLIP) . FUEL CELL, MODIFIED, RH (VELCRO) . CLAMP ATTACHING PARTS . WASHER
28-20-13
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 2 1 10 1 1 2 2
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER MS27039-1-08 MS21044N3
28 29 30 31
26012-4010-1 26012-4017-1 11-01400 87548 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-14 MS21044N3
32 33
26012-4023-2 SA5817-4C MS35333-47 AN924-8D
34 35 36 37 38 39 40
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S AN815-4D 045-4104-1 SA5817-4C MS35333-47 AN924-8D
41
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
42
26012-4012-1
MANUAL No. 26012-40
NOMENCLATURE 123 . SCREW . NUT -------*------. TUBE . CHAFING STRIP . HEAT SHRINK TUBING . STAND-OFF ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT -------*------. TUBE ASSEMBLY, RH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . UNION . TUBE ASSEMBLY . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE
28-20-13
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1
PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
NOMENCLATURE 123
EFFECTIVITY
UNITS/ ASSY
ATTACHING PARTS 200-16H 43 44 45 46
26012-4011-1 MS21266-2N 200-16H 26012-4007-2
47
MS27039-0805
48 49
26012-4024-2 26012-4012-2 200-10H
50
MS25083-2BB6 AN735D8 MS27039-1-07 MS21044N3
51 52
26012-4024-1 26012-4012-1 200-16H
53
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
54
55 56
26012-4013-1 26012-4013-2 26012-4021-1 26012-4021-2 26012-4021-3 26012-4021-4 AN815-6D 26012-4027-1
MANUAL No. 26012-40
. CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, RH ATTACHING PARTS . SCREW -------*------. TUBE ASSEMBLY, OUTB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, OUTB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . UNION . TUBE ASSEMBLY
28-20-13
2 1 1 2 1 10 1 1 2 1 2 2 2 1 1 2 1 2 2 2 A A B B C C
1 1 1 1 1 1 1 1 PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 57 58
PART NUMBER 26012-4024-3 26012-4012-1 200-16H
59
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
60 61 62 63 64
26012-4024-5 AN4-6A 26012-4020-1 26012-4020-2 26012-4019-1 SA5817-4C MS35333-47 AN924-8D
65
26012-4029-1 CR3213-4-03 NAS1329A06-75 AN526-632R7
66
-.035W X Ø.25 OD AN818-4D MS20819-4D
67
68 69
MS21919WDG4 MS27039-1-07 NAS1149F0332P MS21044N3 87558 MS21919WDG4 MS27039-1-20
MANUAL No. 26012-40
NOMENCLATURE 123 . TUBE ASSEMBLY, INB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, INB’D . BOLT . TUBE ASSEMBLY, LH . TUBE ASSEMBLY, RH . DOUBLER . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BRACKET ASSEMBLY ATTACHING PARTS . RIVET . RIVNUT (ALTERNATE) . SCREW (ALTERNATE) ------*------. TUBE ASSY., NACELLE VENT (CUSTOM MAKE PER CTA DWG 26012-4000) . . TUBE (5052-0 ALUMINUM), 34 IN. LG. . . NUT . . SLEEVE ATTACHING PARTS . CLAMP . SCREW . WASHER . NUT . STAND-OFF . CLAMP . SCREW
28-20-13
EFFECTIVITY
UNITS/ ASSY 1 1 2 1 2 2 2 1 1 1 1 1 1 1 1 1 6 6 6 1 1 2 2 3 3 3 3 1 1 1
PAGE 11 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER NAS1149F0332P
70 71 72
MS35489-7 MS21919WDG4 MS21919WDG8 MS27039-1-08 NAS1149F0332P MS21044N3
73 74
AN824-4D --
75
26012-4029-6 045-2110-0039-1 MS21919WDG4 MS27039-1-06 NAS1149F0332P MS21042L3 AN4-7A
NOMENCLATURE 123 . WASHER ------*------. GROMMET . CLAMP . CLAMP ATTACHING PARTS . SCREW . WASHER . NUT ------*------. TEE . TUBE ASSY. (101-920015-11), MODIFIED (PER CTA DWG 26012-4000) . TAB ATTACHING PARTS . SPACER . CLAMP . SCREW . WASHER . NUT . BOLT ------*-------
76
--
. TUBE ASSY. (101-920089-5), MODIFIED (PER CTA DWG 26012-4000)
77 78
101-920015-15 26005-4005-4 045-4101-1
. TUBE ASSEMBLY (REF.) SCREEN ASSEMBLY, TANK OUTLET ADAPTER ASSEMBLY, TANK OUTLET ATTACHING PARTS GASKET, TANK OUTLET WASHER SCREW WASHER SCREW ------*------TUBE ASSEMBLY, TANK SUMP DRAIN ATTACHING PARTS CLAMP SPACER WASHER SCREW
045-4202-8 NAS1149FN816P MS27039-0812 NAS1149FN832P MS27039-0810 79
045-4103-1 MS21919WDG4 045-2118-1 NAS1149FN832P MS27039-0814
MANUAL No. 26012-40
28-20-13
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
D
1 1 2 2 1 5 5 2 1 2 1 1 2 1 PAGE 12 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 80
PART NUMBER 26012-4026-1
NOMENCLATURE 123 ------*------STANDPIPE, VENT, TANK, OUTB’D
EFFECTIVITY
UNITS/ ASSY 2
“END”
CODES OF EFFECTIVITY A
200: BB-2, BB-6 THRU BB-733, BB-735 THRU BB-792, BB-794 THRU BB-828, BB-830 THRU BB-853, BB-871 THRU BB-873, BB-892, BB-893, BB-912 200C: BL-1 THRU BL-6, BL-8 THRU BL-23, BL-25 THRU BL-36 200CT: BN-1 200T: BT-1 THRU BT-22, BT-28 A200: BC-1 THRU BC-75; BD-1 THUR BD-30 A200C: BJ-1 THRU BJ-66 A200CT: BP-1, BP-22, BP-24 THRU BP-63 B200: BB-734, BB-793, BB-829, BB-854 THRU BB-870, BB-874 THRU BB-891, BB-894, BB-896 THRU BB-911, BB-913 THRU BB-990, BB-992 THRU BB-1157, BB-1159 THRU BB-1166, BB-1168 THRU BB-1192 B200C: BL-37 THRU BL-57, BL-61 THRU BL-72 B200CT: BN-2 THRU BN-4 B200T: BT-23 THRU BT-27, BT-29, BT-30
B
B200: BB-1158, BB-1167, BB-1193 & AFTER B200C: BL-73 & AFTER B200CT: BN-5 & AFTER B200T: BT-31 & AFTER B200GT: BY-1 & AFTER B200CGT: BZ-1 & AFTER 300: FA-146 & AFTER B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
C
300: FA-1 THRU FA-145
D
B200GT: BY-117, BY-121 & AFTER B200CGT: BZ-1 & AFTER 300: FA-1 & AFTER B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
MANUAL No. 26012-40
28-20-13
PAGE 13 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-13
PAGE 14 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-20-14 FUEL SYSTEM INSTALLATION ST120 (60 GALLON TANKS) (S/N FM-3)
MANUAL No. 26012-40
28-20-14
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-14
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
B
A 1 2 65
23
3
22
4
66 67
21
5
16 17
20 19 10
7
6
8
18
15 14 9 13
24
12
11
25
A FIGURE 20-14 - FUEL SYSTEM INSTALLATION, ST120 (FM-3) SHEET 1 OF 4
MANUAL No. 26012-40
28-20-14
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
26 27 45 66
28
65 44
67
29
43 30
38
42
39
41
32
40
37
36 31 35
46
34
33
47
B
FIGURE 20-14 - FUEL SYSTEM INSTALLATION, ST120 (FM-3) SHEET 2 OF 4
MANUAL No. 26012-40
28-20-14
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
68
C
61 60 59 49 51 55 52 58
53
54
D
56 57
C
48 50
FIGURE 20-14 - FUEL SYSTEM INSTALLATION, ST120 (FM-3) SHEET 3 OF 4
MANUAL No. 26012-40
28-20-14
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
FIGURE 20-14 - FUEL SYSTEM INSTALLATION, ST120 (FM-3) SHEET 4 OF 4
MANUAL No. 26012-40
28-20-14
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-4000-3
1 2
26012-4000-4
INSTALLATION, FUEL SYSTEM, RH (60-GAL. TANK)
26012-4002-3 MS21919WCH10
. FUEL CELL, MODIFIED, LH (VELCRO) . CLAMP ATTACHING PARTS . STAND-OFF . SCREW . NUT -------*------. TUBE . HEAT SHRINK TUBING . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. BRACKET ATTACHING PARTS . BRACKET . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY . STAND-OFF ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT -------*-------
87548 MS27039-1-15 MS21044N3 3 4 5
26012-4006-1 11-01400 26012-4012-1 200-16H
6
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
7
26012-4018-1 AN743-12 MS21919WDG10 MS27039-1-07 MS21044N3
8 9
NOMENCLATURE 123 INSTALLATION, FUEL SYSTEM, LH (60-GAL. TANK)
26012-4014-1 87558 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-18 MS21044N3
MANUAL No. 26012-40
28-20-14
FM-3
UNITS/ ASSY 1
FM-3
1
EFFECTIVITY
2 1 1 1 1 1 1 2 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 10 11
PART NUMBER 26012-4023-1 SA5817-4C MS35333-47 AN924-8D
12 13 14 15 16 17 18
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S AN815-4D 045-4104-1 SA5817-4C MS35333-47 AN924-8D
19
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
20
26012-4012-1 200-16H
21 22 23 24
26012-4011-1 MS21266-2N 200-16H 26012-4007-1
25
MS27039-0805
26 27
26012-4002-4 MS21919WCH10 NAS1149F0363P MS27039-1-08 MS21044N3
MANUAL No. 26012-40
NOMENCLATURE 123 . TUBE ASSEMBLY, LH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . UNION . TUBE ASSEMBLY . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, LH ATTACHING PARTS . SCREW -------*------. FUEL CELL, MODIFIED, RH (VELCRO) . CLAMP ATTACHING PARTS . WASHER . SCREW . NUT
28-20-14
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 2 1 10 1 2 2 1 1
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 28 29 30 31
PART NUMBER 26012-4010-1 26012-4017-1 11-01400 87548 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-14 MS21044N3
32 33
26012-4023-2 SA5817-4C MS35333-47 AN924-8D
34 35 36 37 38 39 40
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S AN815-4D 045-4104-1 SA5817-4C MS35333-47 AN924-8D
41
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
42
26012-4012-1 200-16H
MANUAL No. 26012-40
NOMENCLATURE 123 -------*------. TUBE . CHAFING STRIP . HEAT SHRINK TUBING . STAND-OFF ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT -------*------. TUBE ASSEMBLY, RH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . UNION . TUBE ASSEMBLY . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*-------
28-20-14
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2
PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
43 44 45 46
26012-4011-1 MS21266-2N 200-16H 26012-4007-2
47
MS27039-0805
48 49
26012-4024-2 26012-4012-2 200-10H
50
MS25083-2BB6 AN735D8 MS27039-1-07 MS21044N3
51 52
26012-4024-1 26012-4012-1 200-16H
53
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
54 55 56
26012-4021-1 26012-4021-2 26012-4024-3 26012-4012-1 200-16H
57
MS25083-2BB6 AN735D10 MS27039-1-07
MANUAL No. 26012-40
NOMENCLATURE 123 . TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, RH ATTACHING PARTS . SCREW -------*------. TUBE ASSEMBLY, OUTB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, OUTB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . TUBE ASSEMBLY, INB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW
28-20-14
EFFECTIVITY
UNITS/ ASSY 1 1 2 1 10 1 1 2 1 2 2 2 1 1 2 1 2 2 2 1 1 1 1 2 1 2 2
PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER MS21044N3
58 59 60
26012-4024-5 26012-4024-17 M6000-04 6506
61
MS25083-2BB6 AN735D4 MS27039-1-07 MS21044N3
62 63 64
26012-4020-1 26012-4020-2 26012-4019-1 SA5817-4C MS35333-47 AN924-8D
65 66
26005-4005-4 045-4101-1 045-4202-8 NAS1149FN816P MS27039-0812 NAS1149FN832P MS27039-0810
67
045-4103-1 MS21919WDG4 045-2118-1 NAS1149FN832P MS27039-0814
68
26012-4026-1
MANUAL No. 26012-40
NOMENCLATURE 123 . NUT -------*------. TUBE ASSEMBLY, INB’D . TUBE ASSEMBLY, VENT . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, LH . TUBE ASSEMBLY, RH . DOUBLER . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------SCREEN ASSEMBLY, TANK OUTLET ADAPTER ASSEMBLY, TANK OUTLET ATTACHING PARTS GASKET, TANK OUTLET WASHER SCREW WASHER SCREW ------*------TUBE ASSEMBLY, TANK SUMP DRAIN ATTACHING PARTS CLAMP SPACER WASHER SCREW ------*------STANDPIPE, VENT, TANK, OUTB’D “END”
28-20-14
EFFECTIVITY
UNITS/ ASSY 2 1 1 1 2 1 2 2 2 1 1 1 1 1 1 2 2 1 5 5 2 1 2 1 1 2 1 2
PAGE 11 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-14
PAGE 12 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-20-15 FUEL SYSTEM INSTALLATION ST72 (36 GALLON TANKS)
MANUAL No. 26012-40
28-20-15
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-15
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
B
A 1 2 23
3
77 78
22
4
80
21
5
20 19 10
7
16
6
17
8
18
15 14 9 13
24
12
11
25
A FIGURE 20-15 - FUEL SYSTEM INSTALLATION, ST72 SHEET 1 OF 4
MANUAL No. 26012-40
28-20-15
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
26 27 45 79
28
77 44
81
29
43 30
38
42
39
41
32
40
37
36 31 35
46
34
33
47
B
FIGURE 20-15 - FUEL SYSTEM INSTALLATION, ST72 SHEET 2 OF 4
MANUAL No. 26012-40
28-20-15
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
82
C
61
49 51 57 52 60
53
54 55 56
D
58 59
C
48 50
FIGURE 20-15 - FUEL SYSTEM INSTALLATION, ST72 SHEET 3 OF 4
MANUAL No. 26012-40
28-20-15
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
62 63 64 D
E
E
D 66
67 69
70 71 73
75
65 68
72
E
76
FIGURE 20-15 - FUEL SYSTEM INSTALLATION, ST72 SHEET 4 OF 4
MANUAL No. 26012-40
28-20-15
PAGE 6 10/05/18
74
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-4000-3 26012-4000-4
1 2
26012-4002-1 26012-4002-3 MS21919WCH10 87548 MS27039-1-15 MS21044N3
3 4 5
26012-4006-1 11-01400 26012-4012-1 200-16H
6
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
7
26012-4018-1 AN743-12 MS21919WDG10 MS27039-1-07 MS21044N3
8 9
26012-4014-1 87558 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-18 MS21044N3
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, FUEL SYSTEM, LH (36-GAL. TANK) INSTALLATION, FUEL SYSTEM, RH (36-GAL. TANK) . FUEL CELL, MODIFIED, LH (CLIP) . FUEL CELL, MODIFIED, LH (VELCRO) . CLAMP ATTACHING PARTS . SPACER . SCREW . NUT -------*------. TUBE . HEAT SHRINK TUBING . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. BRACKET ATTACHING PARTS . BRACKET . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY . STAND OFF ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT
28-20-15
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 2 1 1 1 1 1 1 2 1 2 2 2 1 1 1 2 2 1 1 1 1 1 1 1 2
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 10 11
PART NUMBER 26012-4023-1 SA5817-4C MS35333-47 AN924-8D
12 13 14 15 16 17 18
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S AN815-4D 045-4104-1 SA5817-4C MS35333-47 AN924-8D
19
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
20
26012-4012-1 200-16H
21 22 23 24
26012-4011-1 MS21266-2N 200-16H 26012-4007-1
25
MS27039-0805
26
26012-4002-2 26012-4002-4 MS21919WCH10
27
NAS1149F0363P
MANUAL No. 26012-40
NOMENCLATURE 123 -------*------. TUBE ASSEMBLY, LH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . UNION . TUBE ASSEMBLY . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, LH ATTACHING PARTS . SCREW -------*------. FUEL CELL, MODIFIED, RH (CLIP) . FUEL CELL, MODIFIED, RH (VELCRO) . CLAMP ATTACHING PARTS . WASHER
28-20-15
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 2 1 10 1 1 2 2
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER MS27039-1-08 MS21044N3
28 29 30 31
26012-4010-1 26012-4017-1 11-01400 87548 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-14 MS21044N3
32 33
26012-4023-2 SA5817-4C MS35333-47 AN924-8D
34 35 36 37 38 39 40
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S AN815-4D 045-4104-1 SA5817-4C MS35333-47 AN924-8D
41
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
42
26012-4012-1
MANUAL No. 26012-40
NOMENCLATURE 123 . SCREW . NUT -------*------. TUBE . CHAFING STRIP . HEAT SHRINK TUBING . SPACER ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT -------*------. TUBE ASSEMBLY, RH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . UNION . TUBE ASSEMBLY . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE
28-20-15
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1
PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
NOMENCLATURE 123
EFFECTIVITY
UNITS/ ASSY
ATTACHING PARTS 200-16H 43 44 45 46
26012-4011-1 MS21266-2N 200-16H 26012-4007-2
47
MS27039-0805
48 49
26012-4024-2 26012-4012-2 200-10H
50
MS25083-2BB6 AN735D8 MS27039-1-07 MS21044N3
51 52
26012-4024-1 26012-4012-1 200-16H
53
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
54
55 56
26012-4013-1 26012-4013-2 26012-4021-1 26012-4021-2 26012-4021-3 26012-4021-4 AN815-6D 26012-4027-1
MANUAL No. 26012-40
. CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, RH ATTACHING PARTS . SCREW -------*------. TUBE ASSEMBLY, OUTB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, OUTB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . UNION . TUBE ASSEMBLY
28-20-15
2 1 1 2 1 10 1 1 2 1 2 2 2 1 1 2 1 2 2 2 A A B B C C
1 1 1 1 1 1 1 1 PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 57 58
PART NUMBER 26012-4024-3 26012-4012-1 200-16H
59
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
60 61 62 63 64
26012-4024-5 AN4-6A 26012-4020-1 26012-4020-2 26012-4019-1 SA5817-4C MS35333-47 AN924-8D
65
26012-4029-1 CR3213-4-03 NAS1329A06-75 AN526-632R7
66
-.035W X Ø.25 OD AN818-4D MS20819-4D
67
68 69
MS21919WDG4 MS27039-1-07 NAS1149F0332P MS21044N3 87558 MS21919WDG4 MS27039-1-20
MANUAL No. 26012-40
NOMENCLATURE 123 . TUBE ASSEMBLY, INB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSY., INB’D . BOLT . TUBE ASSEMBLY, LH . TUBE ASSEMBLY, RH . DOUBLER . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BRACKET ASSEMBLY ATTACHING PARTS . RIVET . RIVNUT (ALTERNATE) . SCREW (ALTERNATE) ------*------. TUBE ASSY., NACELLE VENT (CUSTOM MAKE PER CTA DWG 26012-4000) . . TUBE (5052-0 ALUMINUM), 34 IN. LG. . . NUT . . SLEEVE ATTACHING PARTS . CLAMP . SCREW . WASHER . NUT . STAND-OFF . CLAMP . SCREW
28-20-15
EFFECTIVITY
UNITS/ ASSY 1 1 2 1 2 2 2 1 1 1 1 1 1 1 1 1 6 6 6 1 1 2 2 3 3 3 3 1 1 1
PAGE 11 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER NAS1149F0332P
70 71 72
MS35489-7 MS21919WDG4 MS21919WDG8 MS27039-1-08 NAS1149F0332P MS21044N3
73 74
AN824-4D --
75
26012-4029-6 045-2110-0039-1 MS21919WDG4 MS27039-1-06 NAS1149F0332P MS21042L3 AN4-7A
NOMENCLATURE 123 . WASHER ------*------. GROMMET . CLAMP . CLAMP ATTACHING PARTS . SCREW . WASHER . NUT ------*------. TEE . TUBE ASSY. (101-920015-11), MODIFIED (PER CTA DWG 26012-4000) . TAB ATTACHING PARTS . SPACER . CLAMP . SCREW . WASHER . NUT . BOLT ------*-------
76
--
. TUBE ASSY. (101-920089-5), MODIFIED (PER CTA DWG 26012-4000)
77 78 79
101-920015-15 26005-4005-4 045-4202-1 045-4202-2
. TUBE ASSEMBLY (REF.) SCREEN ASSEMBLY, TANK OUTLET ADAPTER ASSEMBLY, TANK OUTLET, LH ADAPTER ASSEMBLY, TANK OUTLET, RH ATTACHING PARTS GASKET, TANK OUTLET WASHER SCREW SCREW NUT CLAMP ------*------TUBE ASSEMBLY, TANK SUMP DRAIN, LH TUBE ASSEMBLY, TANK SUMP DRAIN, RH ATTACHING PARTS CLAMP
045-4202-8 NAS1149FN816P MS27039-0812 MS24694-S5 MS21044N08 MS21919WDG10 80 81
045-4203-1 045-4203-2 MS21919WDG4
MANUAL No. 26012-40
28-20-15
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
D
1 1 2 1 1 1 8 5 3 3 1 1 1 2 PAGE 12 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 045-2118-1 NAS1149FN832P MS24694-S9 NAS1149FN816P MS24694-S10 MS21044N08
82
26012-4026-1
NOMENCLATURE 123 SPACER WASHER SCREW WASHER SCREW NUT ------*------STANDPIPE, VENT, TANK, OUTB’D
EFFECTIVITY
UNITS/ ASSY 2 2 1 1 1 2 2
“END”
CODES OF EFFECTIVITY A
200: BB-2, BB-6 THRU BB-733, BB-735 THRU BB-792, BB-794 THRU BB-828, BB-830 THRU BB-853, BB-871 THRU BB-873, BB-892, BB-893, BB-912 200C: BL-1 THRU BL-6, BL-8 THRU BL-23, BL-25 THRU BL-36 200CT: BN-1 200T: BT-1 THRU BT-22, BT-28 A200: BC-1 THRU BC-75; BD-1 THUR BD-30 A200C: BJ-1 THRU BJ-66 A200CT: BP-1, BP-22, BP-24 THRU BP-63 B200: BB-734, BB-793, BB-829, BB-854 THRU BB-870, BB-874 THRU BB-891, BB-894, BB-896 THRU BB-911, BB-913 THRU BB-990, BB-992 THRU BB-1157, BB-1159 THRU BB-1166, BB-1168 THRU BB-1192 B200C: BL-37 THRU BL-57, BL-61 THRU BL-72 B200CT: BN-2 THRU BN-4 B200T: BT-23 THRU BT-27, BT-29, BT-30
B
B200: BB-1158, BB-1167, BB-1193 & AFTER B200C: BL-73 & AFTER B200CT: BN-5 & AFTER B200T: BT-31 & AFTER B200GT: BY-1 & AFTER B200CGT: BZ-1 & AFTER 300: FA-146 & AFTER B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
C
300: FA-1 THRU FA-145
D
B200GT: BY-117, BY-121 & AFTER B200CGT: BZ-1 & AFTER 300: FA-1 & AFTER B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
MANUAL No. 26012-40
28-20-15
PAGE 13 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-15
PAGE 14 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-20-16 FUEL SYSTEM INSTALLATION ST72 (36 GALLON TANKS) (S/N BB-1239)
MANUAL No. 26012-40
28-20-16
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-20-16
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
B
A 1 2 23
3
66 67
22
4
69
21
5
20 19 10
7
16
6
17
8
18
15 14 9 13
24
12
11
25
A FIGURE 20-16 - FUEL SYSTEM INSTALLATION, ST72 (BB-1239) SHEET 1 OF 4
MANUAL No. 26012-40
28-20-16
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
26 27 45 68
28
66 44
70
29
43 30
38
42
39
41
32
40
37
36 31 35
46
34
33
47
B
FIGURE 20-16 - FUEL SYSTEM INSTALLATION, ST72 (BB-1239) SHEET 2 OF 4
MANUAL No. 26012-40
28-20-16
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
71
72
C
55 56 49
57
51 58
59
52 62
53
54
D
60 61
C
48 50
FIGURE 20-16 - FUEL SYSTEM INSTALLATION, ST72 (BB-1239) SHEET 3 OF 4
MANUAL No. 26012-40
28-20-16
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
FIGURE 20-16 - FUEL SYSTEM INSTALLATION, ST72 (BB-1239) SHEET 4 OF 4
MANUAL No. 26012-40
28-20-16
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-4000-3 26012-4000-4
1 2
26012-4002-1 26012-4002-3 MS21919WCH10 87548 MS27039-1-15 MS21044N3
3 4 5
26012-4006-1 11-01400 26012-4012-1 200-16H
6
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
7
26012-4018-1 AN743-12 MS21919WDG10 MS27039-1-07 MS21044N3
8 9
26012-4014-1 87558 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-18 MS21044N3
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, FUEL SYSTEM, LH (36-GAL. TANK) INSTALLATION, FUEL SYSTEM, RH (36-GAL. TANK) . FUEL CELL, MODIFIED, LH (CLIP) . FUEL CELL, MODIFIED, LH (VELCRO) . CLAMP ATTACHING PARTS . SPACER . SCREW . NUT -------*------. TUBE . HEAT SHRINK TUBING . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. BRACKET ATTACHING PARTS . BRACKET . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY . STAND OFF ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT
28-20-16
BB-1239
UNITS/ ASSY 1
BB-1239
1
EFFECTIVITY
1 1 2 1 1 1 1 1 1 2 1 2 2 2 1 1 1 2 2 1 1 1 1 1 1 1 2 PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 10 11
PART NUMBER 26012-4023-1 SA5817-4C MS35333-47 AN924-8D
12 13 14 15 16 17 18
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S AN815-4D 045-4104-1 SA5817-4C MS35333-47 AN924-8D
19
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
20
26012-4012-1 200-16H
21 22 23 24
26012-4011-1 MS21266-2N 200-16H 26012-4007-1
25
MS27039-0805
26
26012-4002-2 26012-4002-4 MS21919WCH10
27
NAS1149F0363P
MANUAL No. 26012-40
NOMENCLATURE 123 -------*------. TUBE ASSEMBLY, LH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . UNION . TUBE ASSEMBLY . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE ATTACHING PARTS . CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, LH ATTACHING PARTS . SCREW -------*------. FUEL CELL, MODIFIED, RH (CLIP) . FUEL CELL, MODIFIED, RH (VELCRO) . CLAMP ATTACHING PARTS . WASHER
28-20-16
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 2 1 10 1 1 2 2
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER MS27039-1-08 MS21044N3
28 29 30 31
26012-4010-1 26012-4017-1 11-01400 87548 MS21919WCH10 MS21919WCH16 AN743-12 MS27039-1-07 MS27039-1-14 MS21044N3
32 33
26012-4023-2 SA5817-4C MS35333-47 AN924-8D
34 35 36 37 38 39 40
26012-4008-1 MS21266-1N 26012-4009-1 10C6X-S AN815-4D 045-4104-1 SA5817-4C MS35333-47 AN924-8D
41
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
42
26012-4012-1
MANUAL No. 26012-40
NOMENCLATURE 123 . SCREW . NUT -------*------. TUBE ASSEMBLY . CHAFING STRIP . HEAT SHRINK TUBING . SPACER ATTACHING PARTS . CLAMP . CLAMP . BRACKET . SCREW . SCREW . NUT -------*------. TUBE ASSEMBLY, RH . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. ELBOW ASSEMBLY . GROMMET, NYLON EDGE . TUBE ASSEMBLY . ELBOW . UNION . TUBE ASSEMBLY . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. HOSE
28-20-16
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1
PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
NOMENCLATURE 123
EFFECTIVITY
UNITS/ ASSY
ATTACHING PARTS 200-16H 43 44 45 46
26012-4011-1 MS21266-2N 200-16H 26012-4007-2
47
MS27039-0805
48 49
26012-4024-2 26012-4012-2 200-10H
50
MS25083-2BB6 AN735D8 MS27039-1-07 MS21044N3
51 52
26012-4024-1 26012-4012-1 200-16H
53
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
54 55 56
26012-4021-1 26012-4021-2 AN821-4D MS21919WDG4 MS27039-0808 MS21044N08
MANUAL No. 26012-40
. CLAMP -------*------. TUBE . GROMMET, NYLON EDGE . CLAMP . PANEL ASSEMBLY, RH ATTACHING PARTS . SCREW -------*------. TUBE ASSEMBLY, OUTB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, OUTB’D . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, FUEL VENT, LH . TUBE ASSEMBLY, FUEL VENT, RH . ELBOW . CLAMP ATTACHING PARTS . SCREW . NUT -------*-------
28-20-16
2 1 1 2 1 10 1 1 2 1 2 2 2 1 1 2 1 2 2 2 1 1 1 1 1 1
PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 57 58 59 60
PART NUMBER 26012-4005-1 26012-4005-2 MS21266-4N 26012-4024-3 26012-4024-4 26012-4012-1 200-16H
61
MS25083-2BB6 AN735D10 MS27039-1-07 MS21044N3
62 63 64 65
26012-4024-5 26012-4020-1 26012-4020-2 26012-4019-1 SA5817-4C MS35333-47 AN924-8D
66 67 68
26005-4005-4 045-4202-1 045-4202-2 045-4202-8 NAS1149FN816P MS27039-0812 MS24694-S5 MS21044N08 MS21919WDG10
69 70
045-4203-1 045-4203-2 MS21919WDG4 045-2118-1
MANUAL No. 26012-40
NOMENCLATURE 123 . TUBE ASSEMBLY, LH . TUBE ASSEMBLY, RH . GROMMET, NYLON EDGE . TUBE ASSEMBLY, INB’D, LH . TUBE ASSEMBLY, INB’D, RH . HOSE ATTACHING PARTS . CLAMP -------*------. BONDING STRAP ATTACHING PARTS . CLAMP . SCREW . NUT -------*------. TUBE ASSEMBLY, INB’D . TUBE ASSEMBLY, LH . TUBE ASSEMBLY, RH . DOUBLER . FUEL DRAIN VALVE ATTACHING PARTS . LOCK WASHER . NUT -------*------SCREEN ASSEMBLY, TANK OUTLET ADAPTER ASSEMBLY, TANK OUTLET, LH ADAPTER ASSEMBLY, TANK OUTLET, RH ATTACHING PARTS GASKET, TANK OUTLET WASHER SCREW SCREW NUT CLAMP ------*------TUBE ASSEMBLY, TANK SUMP DRAIN, LH TUBE ASSEMBLY, TANK SUMP DRAIN, RH ATTACHING PARTS CLAMP SPACER
28-20-16
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 1 1 2 1 2 2 2 1 1 1 1 1 1 1 2 1 1 1 8 5 3 3 1 1 1 2 2
PAGE 11 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER NAS1149FN832P MS24694-S9 NAS1149FN816P MS24694-S10 MS21044N08
71 72
26012-4025-1 26012-4025-2 26012-4026-1
NOMENCLATURE 123 WASHER SCREW WASHER SCREW NUT ------*------STANDPIPE, VENT, TANK, INB’D, LH STANDPIPE, VENT, TANK, INB’D, RH STANDPIPE, VENT, TANK, OUTB’D
EFFECTIVITY
UNITS/ ASSY 2 1 1 1 2 1 1 2
“END”
MANUAL No. 26012-40
28-20-16
PAGE 12 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-40-10 FUEL LEVEL INDICATION ST190 (95 GALLON TANKS)
MANUAL No. 26012-40
28-40-10
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-40-10
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
FUEL PANEL AT PILOT'S SIDE WALL (REF) 5
A
B
4 3
1
A
2
FIGURE 40-10 - FUEL LEVEL INDICATION, ST190 SHEET 1 OF 2
MANUAL No. 26012-40
28-40-10
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
6 6
3 1
FIGURE 40-10 - FUEL LEVEL INDICATION, ST190 SHEET 2 OF 2
MANUAL No. 26012-40
28-40-10
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-6000-1 26012-6000-2
1
26012-6001-1 26012-7001-2 270-1003 AGC-1/2
2
MS35206-232 MS35206-229 MS35206-244 NAS1149FN632P MS21044N06 MS21044N06 MS21044N08
3 4
5 6
MS21266-3N 26005-6006-1 LLPK1 NAS1149F0832P
7
8 9
26012-6005-1 26012-6006-1 26012-6007-1 26012-6008-1 26005-6009-1 26005-6010-1 26005-6011-1 26005-6012-1
NOMENCLATURE 123 INSTALLATION, 95-GAL FUEL LEVEL INDICATION, KING AIR 200/300 INSTALLATION, FUEL LEVEL INDICATION, B300 (95 GALLON TANKS) . INDICATOR ASSEMBLY (95 GAL. TANKS) . . PLACARD . . FUSE, 0.5 A . . FUSE, 0.5 A (ALTERNATE) ATTACHING PARTS . SCREW . SCREW . SCREW . WASHER . NUT . NUT . NUT -------*------. GROMMET . OPTICAL SWITCH ASSEMBLY . . NUT & O-RING SEAL ATTACHING PARTS . WASHER -------*------. WIRE ASSEMBLY, WING, LH (200/300) . WIRE ASSEMBLY, WING, RH (200/300) . WIRE ASSEMBLY, WING, LH (B300) . WIRE ASSEMBLY, WING, RH (B300) . WIRE ASSEMBLY, FWD, LH . WIRE ASSEMBLY, FWD, RH . WIRE ASSEMBLY, AFT, LH . WIRE ASSEMBLY, AFT, RH
A
UNITS/ ASSY 1
B
1
EFFECTIVITY
1 1 1 1 C D D C C D D
4 1 2 4 4 1 2 1 10 1 1
A A B B
1 1 1 1 1 1 1 1
“END”
CODES OF EFFECTIVITY A
200: BB-2, BB-6 THRU BB-733, BB-735 THRU BB-792, BB-794 THRU BB-828, BB-830 THRU BB-853, BB-871 THRU BB-873, BB-892, BB-893, BB-912 200C: BL-1 THRU BL-23, BL-25 THRU BL-36 200CT: BN-1 200T: BT-1 THRU BT-22, BT-28 A200: BC-1 THRU BC-75; BD-1 THUR BD-30 A200C: BJ-1 THRU BJ-66
MANUAL No. 26012-40
28-40-10
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG A200CT: BP-1, BP-22, BP-24 THRU BP-63 B200: BB-734, BB-793, BB-829, BB-854 THRU BB-870, BB-874 THRU BB-891, BB-894, BB-896 THRU BB-911, BB-913 THRU BB-990, BB-992 & AFTER B200C: BL-37 THRU BL-57, BL-61 & AFTER B200CT: BN-2 THRU BN-4 B200T: BT-23 THRU BT-27, BT-29, BT-30 & AFTER B200GT: BY-1 & AFTER B200CGT: BZ-1 & AFTER 300: FA-1 & AFTER
B
B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
C
200: BB-2, BB-6 THRU BB-733, BB-735 THRU BB-792, BB-794 THRU BB-828, BB-830 THRU BB-853, BB-871 THRU BB-873, BB-892, BB-893, BB-912 200C: BL-1 THRU BL-6, BL-8 THRU BL-23, BL-25 THRU BL-36 200CT: BN-1 200T: BT-1 THRU BT-22, BT-28 A200: BC-1 THRU BC-75; BD-1 THUR BD-30 A200C: BJ-1 THRU BJ-66 A200CT: BP-1, BP-22, BP-24 THRU BP-63 B200: BB-734, BB-793, BB-829, BB-854 THRU BB-870, BB-874 THRU BB-891, BB-894, BB-896 THRU BB-911, BB-913 THRU BB-990, BB-992 & AFTER B200C: BL-37 THRU BL-57, BL-61 & AFTER B200CT: BN-2 THRU BN-4 B200T: BT-23 THRU BT-27, BT-29, BT-30 & AFTER B200GT: BY-1 & AFTER B200CGT: BZ-1 & AFTER 300: FA-1 & AFTER B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
D
200C: BL-7
MANUAL No. 26012-40
28-40-10
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-40-11 FUEL LEVEL INDICATION ST120 (60 GALLON TANKS)
MANUAL No. 26012-40
28-40-11
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-40-11
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
FUEL PANEL AT PILOT'S SIDE WALL (REF) 5
A
B
4 3
1
A
2
C
FIGURE 40-11 - FUEL LEVEL INDICATION, ST120 SHEET 1 OF 2
MANUAL No. 26012-40
28-40-11
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
3 1
9
FIGURE 40-11 - FUEL LEVEL INDICATION, ST120 SHEET 2 OF 2
MANUAL No. 26012-40
28-40-11
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-6000-3 26012-6000-4
1
045-6101-1 045-7101-2 270-1003 AGC-1/2
2 3 4
MS35206-232 NAS1149FN632P MS21044N06
5 6
MS21266-3N 26005-6006-1 LLPK1 NAS1149F0832P
7
8 9
26012-6005-1 26012-6006-1 26012-6007-1 26012-6008-1 26005-6009-1 26005-6010-1 26005-6011-1 26005-6012-1
NOMENCLATURE 123 INSTALLATION, 60-GAL. FUEL LEVEL INDICATION, KING AIR 200/300 INSTALLATION, 60-GAL. FUEL LEVEL INDICATION, KING AIR B300 . INDICATOR ASSEMBLY (60 GAL. TANKS) . . PLACARD . . FUSE, 0.5 A . . FUSE, 0.5 A (ALTERNATE) ATTACHING PARTS . SCREW . WASHER . NUT -------*------. GROMMET . OPTICAL SWITCH ASSEMBLY . . NUT & O-RING SEAL ATTACHING PARTS . WASHER -------*------. WIRE ASSEMBLY, WING, LH (200/300) . WIRE ASSEMBLY, WING, RH (200/300) . WIRE ASSEMBLY, WING, LH (B300) . WIRE ASSEMBLY, WING, RH (B300) . WIRE ASSEMBLY, FWD, LH . WIRE ASSEMBLY, FWD, RH . WIRE ASSEMBLY, AFT, LH . WIRE ASSEMBLY, AFT, RH
A
UNITS/ ASSY 1
B
1
EFFECTIVITY
1 1 1 1 4 4 4 1 10 1 1 A A B B
1 1 1 1 1 1 1 1
“END”
CODES OF EFFECTIVITY A
200: BB-2, BB-6 THRU BB-733, BB-735 THRU BB-792, BB-794 THRU BB-828, BB-830 THRU BB-853, BB-871 THRU BB-873, BB-892, BB-893, BB-912 200C: BL-1 THRU BL-23, BL-25 THRU BL-36 200CT: BN-1 200T: BT-1 THRU BT-22, BT-28 A200: BC-1 THRU BC-75; BD-1 THUR BD-30 A200C: BJ-1 THRU BJ-66 A200CT: BP-1, BP-22, BP-24 THRU BP-63 B200: BB-734, BB-793, BB-829, BB-854 THRU BB-870, BB-874 THRU BB-891, BB-894, BB-896 THRU BB-911, BB-913 THRU BB-990, BB-992 & AFTER B200C: BL-37 THRU BL-57, BL-61 & AFTER B200CT: BN-2 THRU BN-4
MANUAL No. 26012-40
28-40-11
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG B200T: BT-23 THRU BT-27, BT-29, BT-30 & AFTER B200GT: BY-1 & AFTER B200CGT: BZ-1 & AFTER 300: FA-1 & AFTER
B
B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
MANUAL No. 26012-40
28-40-11
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28-40-12 FUEL LEVEL INDICATION ST72 (36 GALLON TANKS)
MANUAL No. 26012-40
28-40-12
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
28-40-12
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
FUEL PANEL AT PILOT'S SIDE WALL (REF) 5
A
B
4 3
1
A
2
C
7
FIGURE 40-12 - FUEL LEVEL INDICATION, ST72 SHEET 1 OF 2
MANUAL No. 26012-40
28-40-12
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
1
3
1
3
D
C 11 12
13
14
15
9
16
14
D
FIGURE 40-12 - FUEL LEVEL INDICATION, ST72 SHEET 2 OF 2
MANUAL No. 26012-40
28-40-12
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-6000-5 26012-6000-6
1
045-6201-1 045-7201-2 270-1003 AGC-1/2
2 3 4
MS35206-232 NAS1149FN632P MS21044N06
5 6
MS21266-3N 26005-6006-1 LLPK1 NAS1149F0832P
7
8 9
10 11 12 13 14 15 16
26012-6005-1 26012-6006-1 26012-6007-1 26012-6008-1 26005-6009-1 26005-6010-1 26005-6011-1 26005-6012-1 SW-20 MS24693-S275 NAS1149D0332J MS35650-302 NAS1149F0332P MS35338-43 MS21042L3
NOMENCLATURE 123 INSTALLATION, 36-GAL. FUEL LEVEL INDICATION, KING AIR 200/300 INSTALLATION, 36-GAL. FUEL LEVEL INDICATION, KING AIR B300 . INDICATOR ASSEMBLY (36 GAL. TANKS) . . PLACARD . . FUSE, 0.5 A . . FUSE, 0.5 A (ALTERNATE) ATTACHING PARTS . SCREW . WASHER . NUT -------*------. GROMMET . OPTICAL SWITCH ASSEMBLY . . NUT & O-RING SEAL ATTACHING PARTS . WASHER -------*------. WIRE ASSEMBLY, WING, LH (200/300) . WIRE ASSEMBLY, WING, RH (200/300) . WIRE ASSEMBLY, WING, LH (B300) . WIRE ASSEMBLY, WING, RH (B300) . WIRE ASSEMBLY, FWD, LH . WIRE ASSEMBLY, FWD, RH . WIRE ASSEMBLY, AFT, LH . WIRE ASSEMBLY, AFT, RH ATTACHING PARTS . SPIRAL WRAP TUBING . SCREW . WASHER . NUT . WASHER . LOCK WASHER . NUT -------*-------
A
UNITS/ ASSY 1
B
1
EFFECTIVITY
1 1 1 1 4 4 4 1 10 1 1 A A B B
1 1 1 1 1 1 1 1 A/R 1 1 1 2 1 1
“END”
MANUAL No. 26012-40
28-40-12
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
CODES OF EFFECTIVITY A
200: BB-2, BB-6 THRU BB-733, BB-735 THRU BB-792, BB-794 THRU BB-828, BB-830 THRU BB-853, BB-871 THRU BB-873, BB-892, BB-893, BB-912 200C: BL-1 THRU BL-23, BL-25 THRU BL-36 200CT: BN-1 200T: BT-1 THRU BT-22, BT-28 A200: BC-1 THRU BC-75; BD-1 THUR BD-30 A200C: BJ-1 THRU BJ-66 A200CT: BP-1, BP-22, BP-24 THRU BP-63 B200: BB-734, BB-793, BB-829, BB-854 THRU BB-870, BB-874 THRU BB-891, BB-894, BB-896 THRU BB-911, BB-913 THRU BB-990, BB-992 & AFTER B200C: BL-37 THRU BL-57, BL-61 & AFTER B200CT: BN-2 THRU BN-4 B200T: BT-23 THRU BT-27, BT-29, BT-30 & AFTER B200GT: BY-1 & AFTER B200CGT: BZ-1 & AFTER 300: FA-1 & AFTER
B
B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
MANUAL No. 26012-40
28-40-12
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
CHAPTER 52 DOORS TABLE OF CONTENTS
CHAPTER SECTION
FIGURE
SADDLE TANK STORAGE DOOR, ST120 (60 GALLON TANKS)
52-10
10
SADDLE TANK STORAGE DOOR, ST120 (60 GALLON TANKS) (FL-360)
52-10
11
FL-360
SADDLE TANK STORAGE DOOR, ST120 (60 GALLON TANKS) (FM-3)
52-10
12
FM-3
SADDLE TANK STORAGE DOOR, ST72 (36 GALLON TANKS)
52-10
13
SADDLE TANK STORAGE DOOR, ST72 (36 GALLON TANKS) (BB-1239)
52-10
14
BB-1239
SADDLE TANK STORAGE DOOR, ST72 (36 GALLON TANKS) (BL-46)
52-10
15
BL-46
52-20
10
SUBJECT
EFFECTIVITY
STORAGE COMPARTMENT DOORS
SERVICE DOORS MODIFIED INVERTER ACCESS PANEL DOOR
MANUAL No. 26012-40
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
52-10-10 SADDLE TANK STORAGE DOOR ST120 (60 GALLON TANKS)
MANUAL No. 26012-40
52-10-10
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-10
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
15 A
17 20 18
A
16 17
19
21
17 3
22
2
B
9 8
1
10
4
6
8
12
7
14 B 13 12 11
A FIGURE 10-10 - SADDLE TANK STORAGE DOOR, ST120 SHEET 1 OF 2
MANUAL No. 26012-40
52-10-10
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
31
D
D
27
C
23
29
28
25
C
26 24
32 30
C
33
34
D
35
FIGURE 10-10 - SADDLE TANK STORAGE DOOR, ST120 SHEET 2 OF 2
MANUAL No. 26012-40
52-10-10
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
1 2
PART NUMBER 045-2101-1 045-2101-2 045-2113-1 045-7101-3 045-2115-1 MS24694-S4 MS24694-S5 MS21042L08
3 4
045-2122-1 045-2107-4 MS27039-0813
5 6
6-2.4-8.64-ME-ME-80 LBS
7 8 9 10 11 12 13 14
AN4-11 NAS1149F0432P 045-2110-0039-1 AN310-4 AN4-11 NAS1149F0432P 045-2110-0039-1 AN310-4 MS24665-134
15
045-2124-1 045-2124-3 9440T63 045-2124-2 045-2124-4 9440T63
16 17 18 19
AN3-16 NAS1149F0332P 87538 AN310-3
MANUAL No. 26012-40
NOMENCLATURE 123 SADDLE TANK PLUS, 60-GAL., LH SADDLE TANK PLUS, 60-GAL., RH . DOOR ASSEMBLY . PLACARD . RECEPTACLE ATTACHING PARTS . SCREW . SCREW . NUT -------*------. SEAL . BRACKET ATTACHING PARTS . SCREW -------*------INTENTIONALLY LEFT BLANK . GAS SPRING ATTACHING PARTS . BOLT . WASHER . SPACER . CASTLE NUT . BOLT . WASHER . SPACER . CASTLE NUT . COTTER PIN -------*------. HINGE ASSEMBLY, LH . . HINGE, GOOSENECK, LH . . SLEEVE BEARING . HINGE ASSEMBLY, RH . . HINGE, GOOSENECK, RH . . SLEEVE BEARING ATTACHING PARTS . BOLT . WASHER . SPACER . NUT
52-10-10
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 2 3 1 4 1 2 2
2 1 2 1 1 1 2 1 1 2 1 1 2 1 1 2 1 3 1 1
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 20
21
PART NUMBER MS24665-134 MS27039-0813 MS27039-0814 045-2125-1 045-2125-2 MS24694-S3 MS27039-0807 NAS1149FN816P MS21042L08
22
045-2125-3 045-2125-4 MS24694-S3 MS27039-0807 NAS1149FN816P MS21042L08
23 24
045-2114-1 045-2114-2 045-2114-3 045-2114-4
25 26 27
MS35206-228 045-2112-15 MS24694-S8
28
30
045-2114-5 045-2114-6 045-2114-7 045-2114-8 H3163-13
31 32
MS24694-S5 MS21044N08
29
MANUAL No. 26012-40
NOMENCLATURE 123 . COTTER PIN . SCREW . SCREW -------*------. BRACKET, INB’D, LH . BRACKET, INB’D, RH ATTACHING PARTS . SCREW . SCREW . WASHER . NUT -------*------. BRACKET, OUTB’D, LH . BRACKET, OUTB’D, RH ATTACHING PARTS . SCREW . SCREW . WASHER . NUT -------*------. LATCH HOUSING, LH . LATCH HOUSING, RH . COVER ASSEMBLY, LH . COVER ASSEMBLY, RH ATTACHING PARTS . SCREW . SHIM . SCREW -------*------. ANGLE, OUTB’D, LH . ANGLE, OUTB’D, RH . ANGLE, INB’D, LH . ANGLE, INB’D, RH . PIN LATCH ASSEMBLY ATTACHING PARTS . SCREW . NUT -------*-------
52-10-10
EFFECTIVITY
UNITS/ ASSY 1 2 1 1 1 2 1 3 3 1 1 2 2 4 4 1 1 1 1 4 1 1 1 1 1 1 2 4 4
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 33 34 35
PART NUMBER 045-2110-0040-1 045-2110-0040-4 39/64 BUNA-N RUBBER SEAL 33815T32 MS27039-0806
NOMENCLATURE 123 . LOCK (OPTIONAL) . CAM (OPTIONAL) . SEAL, PUSH-ON, 10 FT. LG. . TIE DOWN RING ATTACHING PARTS . SCREW -------*-------
EFFECTIVITY
UNITS/ ASSY 1 1 1 6 2
“END”
MANUAL No. 26012-40
52-10-10
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-10
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
52-10-11 SADDLE TANK STORAGE DOOR ST120 (60 GALLON TANKS) (S/N FL-360)
MANUAL No. 26012-40
52-10-11
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-11
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
A 15
A
22
21
16 3
17
2
18
1
9
19
8 5
B
10
9
8
20
17
6 14
7 11
12 B
13 4 12
13
A FIGURE 10-11 - SADDLE TANK STORAGE DOOR, ST120 (FL-360) SHEET 1 OF 2
MANUAL No. 26012-40
52-10-11
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
28 32
D
24 D
C
30
29
26
C
27 25
33 31
C
34
35
D
36
FIGURE 10-11 - SADDLE TANK STORAGE DOOR, ST120 (FL-360) SHEET 2 OF 2
MANUAL No. 26012-40
52-10-11
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
1 2
PART NUMBER 045-2101-1 045-2101-2 045-2113-1 045-7101-3 045-2115-1 MS24694-S4 MS21042L08
3 4
045-2122-1 045-2107-1 045-2107-2 MS27039-0808 MS21044N08
5 6
045-2107-3
7 8 9 10 11 12 13 14
AN4-15 NAS1149F0432P 045-2110-0039-1 AN310-4 AN4-15 NAS1149F0432P 045-2110-0039-1 AN310-4 MS24665-134
15
045-2110-1 045-2110-3 9440T63 045-2110-2 045-2110-4 9440T63
16 17 18
AN3-24 NAS1523-3Y AN310-3
6-2.4-8.64-ME-ME-80 LBS
MANUAL No. 26012-40
NOMENCLATURE 123 SADDLE TANK PLUS, 60-GAL., LH SADDLE TANK PLUS, 60-GAL., RH . DOOR ASSEMBLY . PLACARD . RECEPTACLE ATTACHING PARTS . SCREW . NUT -------*------. SEAL (PER CTA S.B. 045-2015-02) . BRACKET, LH . BRACKET, RH ATTACHING PARTS . SCREW . NUT -------*------. BRACKET . GAS SPRING (PER CTA S.B. 045-2015-01) ATTACHING PARTS . BOLT . WASHER . SPACER . CASTLE NUT . BOLT . WASHER . SPACER . CASTLE NUT . COTTER PIN -------*------. HINGE ARM ASSEMBLY, LH . . HINGE ARM, LH . . SLEEVE BEARING . HINGE ARM ASSEMBLY, RH . . HINGE ARM, RH . . SLEEVE BEARING ATTACHING PARTS . BOLT . STAT-O-SEAL (PER CTA S.B. 045-2015-02) . NUT
52-10-11
EFFECTIVITY FL-360 FL-360
UNITS/ ASSY 1 1 1 1 2 2 2 1 1 1 3 3 1 2 1 2 2 1 1 2 2 1 2 1 1 2 1 1 2 1 2 1
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER MS24665-134 MS21059L08 MS24694-S5
19
045-2111-1 045-2111-2
20
MS27039-0807 NAS1149FN816P MS21042L08 MS24694-S3 NAS1149FN816P MS21042L08
21
22 23 24 25
045-2123-1
045-2114-1 045-2114-2 045-2114-3 045-2114-4
26 27 28
MS35206-228 045-2112-9 MS24693-S27
29
31
045-2114-5 045-2114-6 045-2114-7 045-2114-8 H3163-13
32 33
MS24694-S5 MS21044N08
34
045-2110-0040-1 045-2110-0040-2 9/16 EPDM RUBBER STRIP
30
35
MANUAL No. 26012-40
NOMENCLATURE 123 . COTTER PIN . NUT PLATE . SCREW -------*------. HOUSING ASSEMBLY, LH (ORIGINAL) . HOUSING ASSEMBLY, RH (ORIGINAL) ATTACHING PARTS . SCREW . WASHER . NUT . SCREW . WASHER . NUT -------*------. TAPERED SHIM (PER CTA S.B. 045-201503) INTENTIONALLY LEFT BLANK . LATCH HOUSING, LH . LATCH HOUSING, RH . COVER ASSEMBLY, LH . COVER ASSEMBLY, RH ATTACHING PARTS . SCREW . SHIM . SCREW -------*------. ANGLE, OUTB’D, LH . ANGLE, OUTB’D, RH . ANGLE, INB’D, LH . ANGLE, INB’D, RH . PIN LATCH ASSEMBLY ATTACHING PARTS . SCREW . NUT -------*------. LOCK (OPTIONAL) . CAM (OPTIONAL) . SEAL, ADHESIVE BACKED, 10 FT. LG.
52-10-11
EFFECTIVITY
UNITS/ ASSY 1 3 3 1 1 2 2 2 4 4 4 4
1 1 1 1 4 1 1 1 1 1 1 2 4 4 1 1 1
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 36
PART NUMBER 33815T32 MS27039-0806
NOMENCLATURE 123 . TIE DOWN RING ATTACHING PARTS . SCREW -------*-------
EFFECTIVITY
UNITS/ ASSY 6 2
“END”
MANUAL No. 26012-40
52-10-11
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-11
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
52-10-12 SADDLE TANK STORAGE DOOR ST120 (60 GALLON TANKS) (S/N FM-3)
MANUAL No. 26012-40
52-10-12
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-12
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
16 A
15 22
A
23
20
17 18
3 2
19
21
18
1 5
24
B
8 9 10 8 6 7 14
12 B
4 12
13
11
A FIGURE 10-12 - SADDLE TANK STORAGE DOOR, ST120 (FM-3) SHEET 1 OF 2
MANUAL No. 26012-40
52-10-12
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
29 33
D
25 D
C
31
30
27
C
28 26
34 32
C
35
36
D
37
FIGURE 10-12 - SADDLE TANK STORAGE DOOR, ST120 (FM-3) SHEET 2 OF 2
MANUAL No. 26012-40
52-10-12
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
1 2
PART NUMBER 045-2101-1 045-2101-2 045-2113-1 045-7101-3 045-2115-1 MS24694-S4 MS24694-S5 MS21042L08
3 4
045-2122-1 045-2107-1 045-2107-2 MS27039-0808 MS21044N08
5
045-2107-4 MS27039-0807
6
6-2.4-8.64-ME-ME-80 LBS
7 8 9 10 11 12 13 14
AN4-10 NAS1149F0432P 045-2110-0039-1 AN310-4 AN4-10 NAS1149F0432P 045-2110-0039-1 AN310-4 MS24665-134
15
045-2110-1 045-2110-3 9440T63 045-2110-2 045-2110-4 9440T63
MANUAL No. 26012-40
NOMENCLATURE 123 SADDLE TANK PLUS, 60-GAL., LH SADDLE TANK PLUS, 60-GAL., RH . DOOR ASSEMBLY . PLACARD . RECEPTACLE ATTACHING PARTS . SCREW . SCREW . NUT -------*------. SEAL . BRACKET, LH . BRACKET, RH ATTACHING PARTS . SCREW . NUT -------*------. BRACKET ATTACHING PARTS . SCREW -------*------. GAS SPRING ATTACHING PARTS . BOLT . WASHER . SPACER . CASTLE NUT . BOLT . WASHER . SPACER . CASTLE NUT . COTTER PIN -------*------. HINGE ARM ASSEMBLY, LH . . HINGE ARM, LH . . SLEEVE BEARING . HINGE ARM ASSEMBLY, RH . . HINGE ARM, RH . . SLEEVE BEARING
52-10-12
EFFECTIVITY FM-3 FM-3
UNITS/ ASSY 1 1 1 1 2 3 1 4 1 1 1 3 3 2 2 2 1 2 1 1 1 2 2 1 2 1 1 2 1 1 2
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
16 17 18 19
045-2222-7 AN3-24 NAS1523-3Y AN310-3 MS24665-134 MS21059L08 MS24694-S5 MS27039-0806
20
045-2111-1 045-2111-2
21
MS27039-0807 NAS1149FN816P MS21042L08 MS24694-S3 NAS1149FN816P MS21042L08
22
23 24
045-2123-1 Ø.25 ID X .38 OD POLYURETHANE TUBING
6504 25 26
045-2114-1 045-2114-2 045-2114-3 045-2114-4
27 28 29
MS35206-228 045-2112-9 MS24694-S8
30
045-2114-5 045-2114-6 045-2114-7 045-2114-8
31
MANUAL No. 26012-40
NOMENCLATURE 123 ATTACHING PARTS . ANGLE ASSEMBLY . BOLT . STAT-O-SEAL . NUT . COTTER PIN . NUT PLATE . SCREW . SCREW -------*------. HOUSING ASSEMBLY, LH . HOUSING ASSEMBLY, RH ATTACHING PARTS . SCREW . WASHER . NUT . SCREW . WASHER . NUT -------*------. TAPERED SHIM . TUBE, MOISTURE DRAIN ATTACHING PARTS . HOSE CLAMP -------*------. LATCH HOUSING, LH . LATCH HOUSING, RH . COVER ASSEMBLY, LH . COVER ASSEMBLY, RH ATTACHING PARTS . SCREW . SHIM . SCREW -------*------. ANGLE, OUTB’D, LH . ANGLE, OUTB’D, RH . ANGLE, INB’D, LH . ANGLE, INB’D, RH
52-10-12
EFFECTIVITY
UNITS/ ASSY 1 1 2 1 1 3 3 1 1 1 2 2 2 4 4 4 4 2
2 1 1 1 1 4 1 1 1 1 1 1
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 32
PART NUMBER H3163-13
33 34
MS24694-S5 MS21044N08
35
045-2110-0040-1 045-2110-0040-2 9/16 EPDM RUBBER STRIP 33815T32
36 37
MS27039-0806
NOMENCLATURE 123 . PIN LATCH ASSEMBLY ATTACHING PARTS . SCREW . NUT -------*------. LOCK (OPTIONAL) . CAM (OPTIONAL) . SEAL, ADHESIVE BACKED, 10 FT. LG. . TIE DOWN RING ATTACHING PARTS . SCREW -------*-------
EFFECTIVITY
UNITS/ ASSY 2 4 4 1 1 1 6 2
“END”
MANUAL No. 26012-40
52-10-12
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-12
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
52-10-13 SADDLE TANK STORAGE DOOR ST72 (36 GALLON TANKS)
MANUAL No. 26012-40
52-10-13
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-13
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
15 A
17 20 18
A
16 17
19
21
17 3
23
22
2
B
9 8
1
10
4
6
8
12
7
14 B 13 12 11
A FIGURE 10-13 - SADDLE TANK STORAGE DOOR, ST72 SHEET 1 OF 2
MANUAL No. 26012-40
52-10-13
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
29 33
D
25 D
C
31
C
30
27
28 26
34 32
C
35
36
D
37
FIGURE 10-13 - SADDLE TANK STORAGE DOOR, ST72 SHEET 2 OF 2
MANUAL No. 26012-40
52-10-13
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
1 2
PART NUMBER 045-2201-1 045-2201-2 045-2113-1 045-7201-3 045-2115-1 MS24694-S4 MS24694-S5 MS21042L08
3 4
045-2122-1 045-2107-4 MS27039-0813
5 6 7 8 9 10 11 12 13 14
6-2.4-8.64-ME-ME-80 LBS
AN4-11 NAS1149F0432P 045-2110-0039-1 AN310-4 MS24665-134 AN4-11 NAS1149F0432P 045-2110-0039-1 AN310-4 MS24665-134
15
045-2124-1 045-2124-3 9440T63 045-2124-2 045-2124-4 9440T63
16 17 18
AN3-16 NAS1149F0332P 87538
MANUAL No. 26012-40
NOMENCLATURE 123 SADDLE TANK PLUS, 36-GAL., LH SADDLE TANK PLUS, 36-GAL., RH . DOOR ASSEMBLY . PLACARD . RECEPTACLE ATTACHING PARTS . SCREW . SCREW . NUT -------*------. SEAL . BRACKET ATTACHING PARTS . SCREW -------*------INTENTIONALLY LEFT BLANK . GAS SPRING ATTACHING PARTS . BOLT . WASHER . SPACER . CASTLE NUT . COTTER PIN . BOLT . WASHER . SPACER . CASTLE NUT . COTTER PIN -------*------. HINGE ASSEMBLY, LH . . HINGE, GOOSENECK, LH . . SLEEVE BEARING . HINGE ASSEMBLY, RH . . HINGE, GOOSENECK, RH . . SLEEVE BEARING ATTACHING PARTS . BOLT . WASHER . SPACER
52-10-13
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 2 3 1 4 1 2 2
2 1 2 1 1 1 1 2 1 1 1 1 1 2 1 1 2 1 3 1
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 19 20
21
PART NUMBER AN310-3 MS24665-134 MS27039-0813 MS27039-0814 045-2223-1 045-2223-2 MS24694-S3 MS27039-0806 NAS1149FN816P MS21042L08
22
045-2223-3 045-2223-4 MS24694-S3 MS27039-0806 NAS1149FN816P MS21042L08
23 24 25 26
045-2223-5 045-2223-6 045-2114-1 045-2114-2 045-2114-3 045-2114-4
27 28 29
MS35206-228 045-2112-15 MS24694-S8
30
045-2114-5 045-2114-6 045-2114-7 045-2114-8 H3163-13
31 32
MANUAL No. 26012-40
NOMENCLATURE 123 . NUT . COTTER PIN . SCREW . SCREW -------*------. BRACKET, INB’D, LH . BRACKET, INB’D, RH ATTACHING PARTS . SCREW . SCREW . WASHER . NUT -------*------. BRACKET, OUTB’D, LH . BRACKET, OUTB’D, RH ATTACHING PARTS . SCREW . SCREW . WASHER . NUT -------*------. SUPPORT BRACKET, LH . SUPPORT BRACKET, RH INTENTIONALLY LEFT BLANK . LATCH HOUSING, LH . LATCH HOUSING, RH . COVER ASSEMBLY, LH . COVER ASSEMBLY, RH ATTACHING PARTS . SCREW . SHIM . SCREW -------*------. ANGLE, OUTB’D, LH . ANGLE, OUTB’D, RH . ANGLE, INB’D, LH . ANGLE, INB’D, RH . PIN LATCH ASSEMBLY
52-10-13
EFFECTIVITY
UNITS/ ASSY 1 1 2 1 1 1 2 2 2 4 1 1 2 2 2 4 1 1 1 1 1 1 4 1 1 1 1 1 1 2
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
NOMENCLATURE 123
EFFECTIVITY
UNITS/ ASSY
ATTACHING PARTS 33 34
MS24694-S5 MS21044N08
35
045-2110-0040-1 045-2110-0040-4 39/64 BUNA-N RUBBER SEAL 33815T32
36 37
MS27039-0806
. SCREW . NUT -------*------. LOCK (OPTIONAL) . CAM (OPTIONAL) . SEAL, PUSH-ON, 10 FT. LG.
4 4
. TIE DOWN RING ATTACHING PARTS . SCREW -------*-------
6
1 1 1
2
“END”
MANUAL No. 26012-40
52-10-13
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-13
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
52-10-14 SADDLE TANK STORAGE DOOR ST72 (36 GALLON TANKS) (S/N BB-1239)
MANUAL No. 26012-40
52-10-14
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-14
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
A
15 22
A
21
17 18
16
23
17
3 2 5 9 8 1
20
19
B
10
9 8
6 7 14
12 13
B
4
12
13 11
A FIGURE 10-14 - SADDLE TANK STORAGE DOOR, ST72 (BB-1239) SHEET 1 OF 2
MANUAL No. 26012-40
52-10-14
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
29 33
D
25 D
C
31
C
30
27
28 26
34 32
C
35
36
D
37
FIGURE 10-14 - SADDLE TANK STORAGE DOOR, ST72 (BB-1239) SHEET 2 OF 2
MANUAL No. 26012-40
52-10-14
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
1 2
PART NUMBER 045-2201-1 045-2201-2 045-2113-1 045-7201-3 045-2115-1 MS24694-S4 MS21042L08
3 4
045-2122-1 045-2107-2 045-2107-1 MS27039-0808 MS21044N08
5
045-2107-3 MS27039-0807
6
6-2.4-8.64-ME-ME-80 LBS
7 8 9 10 11 12 13 14
AN4-15 NAS1149F0432P 045-2110-0039-1 AN310-4 AN4-15 NAS1149F0432P 045-2110-0039-1 AN310-4 MS24665-134
15
045-2110-1 045-2110-3 9440T63 045-2110-2 045-2110-4 9440T63
MANUAL No. 26012-40
NOMENCLATURE 123 SADDLE TANK PLUS, 36-GAL., LH SADDLE TANK PLUS, 36-GAL., RH . DOOR ASSEMBLY . PLACARD . RECEPTACLE ATTACHING PARTS . SCREW . NUT -------*------. SEAL . BRACKET, LH . BRACKET, RH ATTACHING PARTS . SCREW . NUT -------*------. BRACKET ATTACHING PARTS . SCREW -------*------. GAS SPRING ATTACHING PARTS . BOLT . WASHER . SPACER . CASTLE NUT . BOLT . WASHER . SPACER . CASTLE NUT . COTTER PIN -------*------. HINGE ARM ASSEMBLY, LH . . HINGE ARM, LH . . SLEEVE BEARING . HINGE ARM ASSEMBLY, RH . . HINGE ARM, RH . . SLEEVE BEARING
52-10-14
EFFECTIVITY BB-1239 BB-1239
UNITS/ ASSY 1 1 1 1 2 2 2 1 1 1 3 3 1 2 2 1 2 2 1 1 2 2 1 2 1 1 2 1 1 2
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
NOMENCLATURE 123
EFFECTIVITY
UNITS/ ASSY
ATTACHING PARTS 16 17 18
AN3-24 NAS1523-3Y AN310-3 MS24665-134 MS21059L08 MS24694-S5
19
045-2111-1 045-2111-2
20
MS27039-0807 NAS1149FN816P MS21042L08 MS24694-S3 NAS1149FN816P MS21042L08
21
22 23
045-2123-1 Ø.25 ID X .38 OD POLYURETHANE TUBING
6504 24 25 26
045-2114-1 045-2114-2 045-2114-3 045-2114-4
27 28 29
MS35206-228 045-2112-9 MS24694-S8
30
045-2114-5 045-2114-6 045-2114-7 045-2114-8 H3163-13
31 32
MANUAL No. 26012-40
. BOLT . STAT-O-SEAL . NUT . COTTER PIN . NUT PLATE . SCREW -------*------. HOUSING ASSEMBLY, LH (MODIFIED) . HOUSING ASSEMBLY, RH (MODIFIED) ATTACHING PARTS . SCREW . WASHER . NUT . SCREW . WASHER . NUT -------*------. TAPERED SHIM . TUBE, MOISTURE DRAIN ATTACHING PARTS . HOSE CLAMP -------*------INTENTIONALLY LEFT BLANK . LATCH HOUSING, LH . LATCH HOUSING, RH . COVER ASSEMBLY, LH . COVER ASSEMBLY, RH ATTACHING PARTS . SCREW . SHIM . SCREW -------*------. ANGLE, OUTB’D, LH . ANGLE, OUTB’D, RH . ANGLE, INB’D, LH . ANGLE, INB’D, RH . PIN LATCH ASSEMBLY
52-10-14
1 2 1 1 3 3 1 1 2 2 2 4 4 4 4 2
2
1 1 1 1 4 1 1 1 1 1 1 2
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
NOMENCLATURE 123
EFFECTIVITY
UNITS/ ASSY
ATTACHING PARTS 33 34
MS24694-S5 MS21044N08
35
045-2110-0040-1 045-2110-0040-2 9/16 EPDM RUBBER STRIP 33815T32
36 37
MS27039-0806
. SCREW . NUT -------*------. LOCK (OPTIONAL) . CAM (OPTIONAL) . SEAL, ADHESIVE BACKED, 10 FT. LG.
4 4
. TIE DOWN RING ATTACHING PARTS . SCREW -------*-------
6
1 1 1
2
“END”
MANUAL No. 26012-40
52-10-14
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-14
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
52-10-15 SADDLE TANK STORAGE DOOR ST72 (36 GALLON TANKS) (S/N BL-46)
MANUAL No. 26012-40
52-10-15
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-15
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
16 15 A
21 23
20
A 17 18 3
19
2
22
18 24 5
B
8
1 9
10 8 6 7
14
12 B
4 12
13
11
A FIGURE 10-15 - SADDLE TANK STORAGE DOOR, ST72 (BL-46) SHEET 1 OF 2
MANUAL No. 26012-40
52-10-15
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
29 33
D
25 D
C
31
C
30
27
28 26
34 32
C
35
36
D
37
FIGURE 10-15 - SADDLE TANK STORAGE DOOR, ST72 (BL-46) SHEET 2 OF 2
MANUAL No. 26012-40
52-10-15
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
1 2
PART NUMBER 045-2201-1 045-2201-2 045-2113-1 045-7201-3 045-2115-1 MS24694-S4 MS24694-S5 MS21042L08
3 4
045-2122-1 045-2107-1 045-2107-2 MS27039-0808 MS21044N08
5
045-2107-4 MS27039-0807
6
6-2.4-8.64-ME-ME-80 LBS
7 8 9 10 11 12 13 14
AN4-10 NAS1149F0432P 045-2110-0039-1 AN310-4 AN4-10 NAS1149F0432P 045-2110-0039-1 AN310-4 MS24665-134
15
045-2110-1 045-2110-3 9440T63 045-2110-2 045-2110-4 9440T63
MANUAL No. 26012-40
NOMENCLATURE 123 SADDLE TANK PLUS, 36-GAL., LH SADDLE TANK PLUS, 36-GAL., RH . DOOR ASSEMBLY . PLACARD . RECEPTACLE ATTACHING PARTS . SCREW . SCREW . NUT -------*------. SEAL . BRACKET, LH . BRACKET, RH ATTACHING PARTS . SCREW . NUT -------*------. BRACKET ATTACHING PARTS . SCREW -------*------. GAS SPRING ATTACHING PARTS . BOLT . WASHER . SPACER . CASTLE NUT . BOLT . WASHER . SPACER . CASTLE NUT . COTTER PIN -------*------. HINGE ARM ASSEMBLY, LH . . HINGE ARM, LH . . SLEEVE BEARING . HINGE ARM ASSEMBLY, RH . . HINGE ARM, RH . . SLEEVE BEARING
52-10-15
EFFECTIVITY BL-46 BL-46
UNITS/ ASSY 1 1 1 1 2 3 1 4 1 1 1 2 2 2 2 2 1 2 1 1 1 2 1 1 2 1 1 2 1 1 2
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
16 17 18 19
045-2222-7 AN3-24 NAS1523-3Y AN310-3 MS24665-134 MS21059L08 MS24694-S5 MS27039-0806
20
045-2220-1 045-2220-2
21
MS24694S3 NAS1149FN816P MS21042L08 MS27039-0808 NAS1149FN832P MS21042L08
22
23 24
045-2123-1 Ø.25 ID X .38 OD POLYURETHANE TUBING
6504 25 26
045-2114-1 045-2114-2 045-2114-3 045-2114-4
27 28 29
MS35206-228 045-2112-9 MS24694-S8
30
045-2114-5 045-2114-6 045-2114-7 045-2114-8
31
MANUAL No. 26012-40
NOMENCLATURE 123 ATTACHING PARTS . ANGLE ASSEMBLY . BOLT . STAT-O-SEAL . NUT . COTTER PIN . NUT PLATE . SCREW . SCREW -------*------. HOUSING ASSEMBLY, LH (MODIFIED) . HOUSING ASSEMBLY, RH (MODIFIED) ATTACHING PARTS . SCREW . WASHER . NUT . SCREW . WASHER . NUT -------*------. TAPERED SHIM . TUBE, MOISTURE DRAIN ATTACHING PARTS . HOSE CLAMP -------*------. LATCH HOUSING, LH . LATCH HOUSING, RH . COVER ASSEMBLY, LH . COVER ASSEMBLY, RH ATTACHING PARTS . SCREW . SHIM . SCREW -------*------. ANGLE, OUTB’D, LH . ANGLE, OUTB’D, RH . ANGLE, INB’D, LH . ANGLE, INB’D, RH
52-10-15
EFFECTIVITY
UNITS/ ASSY 1 1 2 1 1 3 3 1 1 1 4 4 4 3 3 3 4 2
2 1 1 1 1 4 1 1 1 1 1 1
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
32
H3163-13
33 34
MS24694-S5 MS21044N08
35
045-2110-0040-1 045-2110-0040-2 9/16 EPDM RUBBER STRIP 33815T32
36 37
MS27039-0806
NOMENCLATURE 123 . PIN LATCH ASSEMBLY ATTACHING PARTS . SCREW . NUT -------*------. LOCK (OPTIONAL) . CAM (OPTIONAL) . SEAL, ADHESIVE BACKED, 10 FT. LG. . TIE DOWN RING ATTACHING PARTS . SCREW -------*-------
EFFECTIVITY
UNITS/ ASSY 2 4 4 1 1 1 6 2
“END”
MANUAL No. 26012-40
52-10-15
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-10-15
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
52-20-10 MODIFIED INVERTER ACCESS PANEL DOOR
MANUAL No. 26012-40
52-20-10
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-20-10
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
A
A
1
2
3
A
FIGURE 20-10 - MODIFIED INVERTER ACCESS PANEL DOOR
MANUAL No. 26012-40
52-20-10
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-20-10
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-9000-1
1
2
3
101-120063-31 101-120063-105 101-120063-32 101-120063-106 26012-9001-1 MS21059L3 MS21061L3 MS24694-S50 MS24694-C50
NOMENCLATURE 123 MODIFICATION, INVERTER ACCESS PANEL, LH & RH . DOOR, LH INVERTER ACCESS (REF.) . DOOR, LH INVERTER ACCESS (REF.) . DOOR, RH INVERTER ACCESS (REF.) . DOOR, RH INVERTER ACCESS (REF.) . DOUBLER . . NUT PLATE . . NUT PLATE ATTACHING PARTS . SCREW . SCREW (ALTERNATE) -------*-------
EFFECTIVITY A, B A B A B
UNITS/ ASSY 1 1 1 1 1 2 22 4 57 57
“END”
CODES OF EFFECTIVITY A
200: BB-2, BB-6 THRU BB-733, BB-735 THRU BB-792, BB-794 THRU BB-828, BB-830 THRU BB-853, BB-871 THRU BB-873, BB-892, BB-893, BB-912 200C: BL-1 THRU BL-23, BL-25 THRU BL-36 200CT: BN-1 200T: BT-1 THRU BT-22, BT-28 A200: BC-1 THRU BC-75; BD-1 THUR BD-30 A200C: BJ-1 THRU BJ-66 A200CT: BP-1, BP-22, BP-24 THRU BP-63 B200: BB-734, BB-793, BB-829, BB-854 THRU BB-870, BB-874 THRU BB-891, BB-894, BB-896 THRU BB-911, BB-913 THRU BB-990, BB-992 THRU BB-1513 B200C: BL-37 THRU BL-57, BL-61 THRU BL-140 B200CT: BN-2 THRU BN-4 B200T: BT-23 THRU BT-27, BT-29 THRU BT-38 300: FA-1 & AFTER B300: FL-1 THRU FL-126 B300C: FM-1 THRU FM-8
B
B200: BB-1514 & AFTER B200C: BL-141 & AFTER B200T: BT-39 & AFTER B200GT: BY-1 & AFTER B200CGT: BZ-1 & AFTER B300: FL-127 & AFTER B300C: FM-9 & AFTER
MANUAL No. 26012-40
52-20-10
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
52-20-10
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
CHAPTER 54 NACELLES/PYLONS TABLE OF CONTENTS
CHAPTER SECTION
FIGURE
FAIRINGS, KING AIR 200/B200 SERIES
54-10
10
FAIRINGS, KING AIR 200/B200 SERIES (BL-7)
54-10
11
FAIRINGS, KING AIR 300/B300 SERIES
54-10
12
SUBJECT
EFFECTIVITY
SADDLE TANK FAIRINGS
MANUAL No. 26012-40
BL-7
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
54-10-10 SADDLE TANK FAIRINGS KING AIR 200/B200 SERIES
MANUAL No. 26012-40
54-10-10
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
54-10-10
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
21 15
20
16
18
19
C
B A 2
5
1
7
11
13 12 4 4
17
14
A
6
FIGURE 10-10 - SADDLE TANK FAIRINGS (200/B200) SHEET 1 OF 3
MANUAL No. 26012-40
54-10-10
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
21 25
20
26
18
19
9 23
10
22
B
4 24 8
27
FIGURE 10-10 - SADDLE TANK FAIRINGS (200/B200) SHEET 2 OF 3
MANUAL No. 26012-40
54-10-10
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
E
E
FIGURE 10-10 - SADDLE TANK FAIRINGS (200/B200) SHEET 3 OF 3
MANUAL No. 26012-40
54-10-10
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
54-10-10
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-3000-1 26012-3000-5 26012-3000-2 26012-3000-6
1
045-3104-1 045-3104-2
2 3 4 5
MS24694-S51 MS24694-S4 MS24694-S51 MS24694-S54
6
26005-3003-1 MS24693-S26 NAS1149FN632P MS21044N06
7
8
9
045-3106-1 85-3550-53 85-3550-54 045-3106-2 85-3550-51 85-3550-52 85-3550-55 85-3550-56 045-3106-3 85-3550-57 MS24693-S8 MS24693-S50
10 11 12
045-3107-1 85-3510-207 045-3110-0020 26012-3001-4 26012-3001-5
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, FAIRING, LH INSTALLATION, FAIRING, LH (REPLACEMENT FOR CROWN LOCKER) INSTALLATION, FAIRING, RH INSTALLATION, FAIRING, RH (REPLACEMENT FOR CROWN LOCKER) . FAIRING ASSEMBLY, LH . FAIRING ASSEMBLY, RH ATTACHING PARTS . SCREW . SCREW . SCREW . SCREW -------*------. LENS ATTACHING PARTS . SCREW . WASHER . NUT -------*------. FAIRING STRIP . FAIRING, TOP, LH (RAISBECK) . FAIRING, TOP, RH (RAISBECK) . FAIRING STRIP . FAIRING, INB’D, LH (RAISBECK) . FAIRING, INB’D, RH (RAISBECK) . FAIRING, OUTB’D, LH (RAISBECK) . FAIRING, OUTB’D, RH (RAISBECK) . CAP . CAP ASSY. (RAISBECK) ATTACHING PARTS . SCREW . SCREW -------*------. GANG CHANNEL . NUT PLATE STRIP (RAISBECK) . SHIM, 1/32 EPDM RUBBER, ADHESIVE BACKED . PLATE, OUTB’D, LH . PLATE, OUTB’D, RH
54-10-10
A B
UNITS/ ASSY 1 1
A B
1 1
EFFECTIVITY
1 1 15 2 29 1 1 4 4 4 A B B A B B B B A B
1 1 1 2 1 1 1 1 2 2 1 1
A B
2 2 A/R 1 1 PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 13 14
PART NUMBER 26012-3002-1 26012-3002-2 26012-3002-4 26012-3002-5
15 16
MS27039-1-08 NAS1149F0332P MS21059L3
17
26012-3004-6 MS27039-1-07
18
26005-4011-1
19 20 21
MS24694-S5 NAS1149FN832P MS21044N08
22
26012-3001-2 26012-3001-3 26012-3004-3 26012-3004-5 26012-3004-7
23 24
25 26
MS27039-0807 NAS1149FN832P MS21059L3
27
26012-3010-1
40
26012-3004-5 26012-3004-6 MS27039-0807
41
26012-3011-3 MS21059L3
MANUAL No. 26012-40
NOMENCLATURE 123 . BRACKET, OUTB’D, LH . BRACKET, OUTB’D, RH . BRACKET, OUTB’D, LH . BRACKET, OUTB’D, RH ATTACHING PARTS . SCREW . WASHER . NUT PLATE -------*------. BRACKET, OUTB’D, LH & RH ATTACHING PARTS . SCREW -------*------. GROUND STRAP ATTACHING PARTS . SCREW . WASHER . NUT -------*------. PLATE, INB’D, LH . PLATE, INB’D, RH . BRACKET, INB’D, LH & RH . BRACKET, INB’D, LH . BRACKET, INB’D, RH ATTACHING PARTS . SCREW . WASHER . NUT PLATE -------*------. RUBBER STRIP (OPTIONAL) ---------------------------------------------------------ALTERNATE ICE LIGHT RELOCATION . BRACKET, OUTB’D, LH . BRACKET, OUTB’D, RH ATTACHING PARTS . SCREW -------*------. DOUBLER . NUT PLATE
54-10-10
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 2 2 7 1 1 2 1 1 1 1 1 1 1 1 2 1 5 1
1 1 1 1 6
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
42
101-980028-5 101-980028-6
43
MS24694-S49
NOMENCLATURE 123 ICE LIGHT COVER ASSEMBLY, LH ICE LIGHT COVER ASSEMBLY, RH ATTACHING PARTS SCREW -------*-------
EFFECTIVITY
UNITS/ ASSY 1 1 6
“END”
CODES OF EFFECTIVITY A
200: BB-2, BB-6 THRU BB-733, BB-735 THRU BB-792, BB-794 THRU BB-828, BB-830 THRU BB-853, BB-871 THRU BB-873, BB-892, BB-893, BB-912 200C: BL-1 THRU BL-6, BL-8 THRU BL-23, BL-25 THRU BL-36 200CT: BN-1 200T: BT-1 THRU BT-22, BT-28 A200: BC-1 THRU BC-75; BD-1 THUR BD-30 A200C: BJ-1 THRU BJ-66 A200CT: BP-1, BP-22, BP-24 THRU BP-63 B200: BB-734, BB-793, BB-829, BB-854 THRU BB-870, BB-874 THRU BB-891, BB-894, BB-896 THRU BB-911, BB-913 THRU BB-990, BB-992 & AFTER B200C: BL-37 THRU BL-57, BL-61 & AFTER B200CT: BN-2 THRU BN-4 B200T: BT-23 THRU BT-27, BT-29, BT-30 & AFTER B200GT: BY-1 & AFTER B200CGT: BZ-1 & AFTER
B
200: BB-2, BB-6 THRU BB-733, BB-735 THRU BB-792, BB-794 THRU BB-828, BB-830 THRU BB-853, BB-871 THRU BB-873, BB-892, BB-893, BB-912 200C: BL-1 THRU BL-6, BL-8 THRU BL-23, BL-25 THRU BL-36 200CT: BN-1 200T: BT-1 THRU BT-22, BT-28 A200: BC-1 THRU BC-75; BD-1 THUR BD-30 A200C: BJ-1 THRU BJ-66 A200CT: BP-1, BP-22, BP-24 THRU BP-63 B200: BB-734, BB-793, BB-829, BB-854 THRU BB-870, BB-874 THRU BB-891, BB-894, BB-896 THRU BB-911, BB-913 THRU BB-990, BB-992 & AFTER B200C: BL-37 THRU BL-57, BL-61 & AFTER B200CT: BN-2 THRU BN-4 B200T: BT-23 THRU BT-27, BT-29, BT-30 & AFTER B200GT: BY-1 & AFTER B200CGT: BZ-1 & AFTER NOTE: THIS AIRCRAFT SERIAL NUMBER EFFECTIVITY IS APPLICABLE ONLY IF AIRCRAFT WAS PREVIOUSLY EQUIPPED WITH RAISBECK CROWN LOCKERS.
MANUAL No. 26012-40
54-10-10
PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
54-10-10
PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
54-10-11 SADDLE TANK FAIRINGS KING AIR 200/B200 SERIES (S/N BL-7)
MANUAL No. 26012-40
54-10-11
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
54-10-11
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
B
C
A 2
1
7 6 2
11
8
A
5
FIGURE 10-11 - SADDLE TANK FAIRINGS (BL-7) SHEET 1 OF 2
MANUAL No. 26012-40
54-10-11
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
17
18 16
B
2 19 20
FIGURE 10-11 - SADDLE TANK FAIRINGS (BL-7) SHEET 2 OF 2
MANUAL No. 26012-40
54-10-11
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
1
PART NUMBER 26012-3000-1 26012-3000-2 26012-3003-1 045-3104-1 26012-3003-2 045-3104-2 26012-3009-1 26012-3009-2 26012-3005-1 26012-3005-2
2 3 4
MS24694-S4 AN525-832R7 MS24694-S5
5
26005-3003-1 MS24693-S26 NAS1149FN632P MS21044N06
6 7 8
26012-3001-4 26012-3001-5 26012-3002-1 26012-3002-4 26012-3002-5
9 10
MS27039-1-08 NAS1149F0332P MS21059L08
11
26012-3004-6 26012-3007-1 MS27039-1-07
12
26005-4011-1
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, FAIRING, LH INSTALLATION, FAIRING, RH . FAIRING SKIN, LH . FAIRING ASSEMBLY, LH (REPLACEMENT FOR 26012-3003-1) . FAIRING SKIN, RH . FAIRING ASSEMBLY, RH (REPLACEMENT FOR 26012-3003-2) . CHANNEL, FWD . CHANNEL, AFT . BULKHEAD FRAME, LH . BULKHEAD FRAME, RH ATTACHING PARTS . SCREW . SCREW . SCREW -------*------. LENS ATTACHING PARTS . SCREW . WASHER . NUT -------*------. PLATE, OUTB’D, LH . PLATE, OUTB’D, RH . BRACKET, OUTB’D, LH & RH . BRACKET, OUTB’D, LH . BRACKET, OUTB’D, RH ATTACHING PARTS . SCREW . WASHER . NUT PLATE -------*------. BRACKET, OUTB’D, LH . BRACKET, OUTB’D, RH ATTACHING PARTS . SCREW -------*------. GROUND STRAP
54-10-11
EFFECTIVITY BL-7 BL-7
UNITS/ ASSY 1 1 1 1 1 1 1 1 1 1 43 20 2 1 4 4 4 1 1 1 1 1 2 2 9 1 1 1 2
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
NOMENCLATURE 123
EFFECTIVITY
UNITS/ ASSY
ATTACHING PARTS 13 14 15
MS24694-S5 NAS1149FN832P MS21044N08
16
26012-3001-2 26012-3001-3 26012-3008-1 26012-3008-2 26012-3004-3 26012-3004-4 26012-3004-5 26012-3004-6
17 18 19
MS27039-0807 NAS1149FN832P MS21059L08 MS21061L08 20
26012-3010-1
. SCREW . WASHER . NUT -------*------. PLATE, INB’D, LH . PLATE, INB’D, RH . SPLICE PLATE, INB’D, LH . SPLICE PLATE, INB’D, RH . BRACKET, INB’D, LH . BRACKET, INB’D, RH . BRACKET, INB’D, LH . BRACKET, INB’D, RH ATTACHING PARTS . SCREW . WASHER . NUT PLATE . NUT PLATE -------*------. RUBBER STRIP
1 1 1 1 1 1 1 1 1 1 1 2 1 5 1 1
“END”
MANUAL No. 26012-40
54-10-11
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
54-10-12 SADDLE TANK FAIRINGS KING AIR 300/B300 SERIES
MANUAL No. 26012-40
54-10-12
PAGE 1 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
54-10-12
PAGE 2 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
21 15
20
16
18
19
C
B A 2
1 5 7
13 12 4 4
17
14
A
6
FIGURE 10-12 - SADDLE TANK FAIRINGS (300/B300) SHEET 1 OF 3
MANUAL No. 26012-40
54-10-12
PAGE 3 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
21 25
20
26
18
19
9 23
8
22
B
10
4 24
FIGURE 10-12 - SADDLE TANK FAIRINGS (300/B300) SHEET 2 OF 3
MANUAL No. 26012-40
54-10-12
PAGE 4 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
E
E
FIGURE 10-12 - SADDLE TANK FAIRINGS (300/B300) SHEET 3 OF 3
MANUAL No. 26012-40
54-10-12
PAGE 5 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
54-10-12
PAGE 6 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER 26012-3000-3 26012-3000-5 26012-3000-4 26012-3000-6
1
045-3104-1 045-3104-2
2 3 4 5
MS24694-S51 MS24694-S4 MS24694-S51 MS24694-S54
6
26005-3003-1 MS24693S-26 NAS1149FN632P MS21044N06
7
8
9
045-3106-1 85-3550-53 85-3550-54 045-3106-2 85-3550-51 85-3550-52 85-3550-55 85-3550-56 045-3106-3 85-3550-57 MS24693-S8 MS24693-S50
10 11 12
045-3107-1 85-3510-207 045-3110-0020 26012-3001-4 26012-3001-5
MANUAL No. 26012-40
NOMENCLATURE 123 INSTALLATION, FAIRING, LH INSTALLATION, FAIRING, LH (REPLACEMENT FOR CROWN LOCKER) INSTALLATION, FAIRING, RH INSTALLATION, FAIRING, RH (REPLACEMENT FOR CROWN LOCKER) . FAIRING ASSEMBLY, LH . FAIRING ASSEMBLY, RH ATTACHING PARTS . SCREW . SCREW . SCREW . SCREW -------*------. LENS ATTACHING PARTS . SCREW . WASHER . NUT -------*------. FAIRING STRIP . FAIRING, TOP, LH (RAISBECK) . FAIRING, TOP, RH (RAISBECK) . FAIRING STRIP . FAIRING, INB’D, LH (RAISBECK) . FAIRING, INB’D, RH (RAISBECK) . FAIRING, OUTB’D, LH (RAISBECK) . FAIRING, OUTB’D, RH (RAISBECK) . CAP . CAP ASSY. (RAISBECK) ATTACHING PARTS . SCREW . SCREW -------*------. GANG CHANNEL . NUT PLATE STRIP (RAISBECK) . SHIM, 1/32 EPDM RUBBER, ADHESIVE BACKED . PLATE, OUTB’D, LH . PLATE, OUTB’D, RH
54-10-12
A B
UNITS/ ASSY 1 1
A B
1 1
EFFECTIVITY
1 1 15 2 27 1 1 4 4 4 A B B A B B B B A B
1 1 1 2 1 1 1 1 2 2 1 1
A B
2 2 A/R 1 1
PAGE 7 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM 13 14
PART NUMBER 26012-3002-1 26012-3002-2 26012-3002-4 26012-3002-5
15 16
MS27039-1-08 NAS1149F0332P MS21059L3
17
26012-3004-6 MS27039-1-07
18
26005-4011-1
19 20 21
MS24694-S5 NAS1149FN832P MS21044N08
22
26012-3001-2 26012-3001-3 26012-3004-3 26012-3004-5 26012-3004-7
23 24
25 26
MS27039-0807 NAS1149FN832P MS21059L3
27
26012-3010-1
40
26012-3004-5 26012-3004-6 MS27039-0807
41
26012-3011-3 MS21059L3
MANUAL No. 26012-40
NOMENCLATURE 123 . BRACKET, OUTB’D, LH . BRACKET, OUTB’D, RH . BRACKET, OUTB’D, LH . BRACKET, OUTB’D, RH ATTACHING PARTS . SCREW . WASHER . NUT PLATE -------*------. BRACKET, OUTB’D, LH & RH ATTACHING PARTS . SCREW -------*------. GROUND STRAP ATTACHING PARTS . SCREW . WASHER . NUT -------*------. PLATE, INB’D, LH . PLATE, INB’D, RH . BRACKET, INB’D, LH & RH . BRACKET, INB’D, LH . BRACKET, INB’D, RH ATTACHING PARTS . SCREW . WASHER . NUT PLATE -------*------. RUBBER STRIP (OPTIONAL) ---------------------------------------------------------ALTERNATE ICE LIGHT RELOCATION . BRACKET, OUTB’D, LH . BRACKET, OUTB’D, RH ATTACHING PARTS . SCREW -------*------. DOUBLER . NUT PLATE
54-10-12
EFFECTIVITY
UNITS/ ASSY 1 1 1 1 2 2 7 1 1 2 1 1 1 1 1 1 1 1 2 1 5 1
1 1 1 1 6
PAGE 8 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
ITEM
PART NUMBER
42
101-980028-5 101-980028-6
43
MS24694-S49
NOMENCLATURE 123 ICE LIGHT COVER ASSEMBLY, LH ICE LIGHT COVER ASSEMBLY, RH ATTACHING PARTS SCREW -------*-------
EFFECTIVITY
UNITS/ ASSY 1 1 6
“END”
CODES OF EFFECTIVITY A
300: FA-1 & AFTER B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1
B
300: FA-1 & AFTER B300: FL-1 & AFTER B300C: FM-1 & AFTER; FN-1 NOTE: THIS AIRCRAFT SERIAL NUMBER EFFECTIVITY IS APPLICABLE ONLY IF AIRCRAFT WAS PREVIOUSLY EQUIPPED WITH RAISBECK CROWN LOCKERS.
MANUAL No. 26012-40
54-10-12
PAGE 9 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
[Intentional Blank Page]
MANUAL No. 26012-40
54-10-12
PAGE 10 10/05/18
BEECHCRAFT KING AIR 200 & 300 SERIES SADDLE TANKS ILLUSTRATED PARTS CATALOG
END OF MANUAL
MANUAL No. 26012-40
10/05/18