Industrial Standards List

  • May 2020
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Industrial Standards List as PDF for free.

More details

  • Words: 6,457
  • Pages: 22
ASTM STANDARDS Steel, Stainless Steel and Related Alloys ASTM A 1031-04, Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled ASTM A 249/A 249M-03a, Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes (R) ASTM A 213/A 213M-03b, Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes (R) ASTM A 213/A 213M-03c, Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes (R) ASTM A 249/A 249M-03, Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes (R) ASTM A 270-03a, Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing (R) ASTM A 450/A 450M-03, Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes (R) ASTM A 694/A 694M-03, Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service (R) ASTM A 105/A 105M-03, Specification for Carbon Steel Forgings for Piping Applications (R) ASTM A 234/A 234M-03, Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service (R) ASTM A 420/A 420M-03, Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service (R) ASTM A 453/A 453M-03, Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels (R) ASTM A 1014-03, Specification for Precipitation-Hardening Bolting Material UNS N07718 for High Temperature Service (R) ASTM A 240/A 240M-04, Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications (R) ASTM A 480/A 480M-03c, Specification for General Requirements for Flat-Rolled Stainless and HeatResisting Steel Plate, Sheet, and Strip (R) ASTM A 1008/A 1008M-04, Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, HighStrength Low-Alloy and High-Strength Low-Alloy with Improved Formability (R) ASTM A 970/A 970M-04, Specification for Headed Steel Bars for Concrete Reinforcement (R)

ASTM A 20/A 20M-04, Specification for General Requirements for Steel Plates for Pressure Vessels (R) ASTM A 615/A 615M-04, Specification for Deformed and Plain Carbon Steel Bars for Concrete Reinforcement (R) ASTM A 706/A 706M-04, Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement (R) ASTM A 882/A 882M-04, Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand (R) ASTM A 521-03, Specification for Steel, Closed-Impression Die Forgings for General Industrial Use (R) ASTM A 579/A 579M-04 (Includes change to title), Specification for Superstrength Alloy Steel Forgings (R) ASTM A 624/A 624M-03, Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced (R) ASTM A 626/A 626M-03, Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced (R)

Iron Castings ASTM A 48/A 48M-03, Specification for Gray Iron Castings (R) ASTM A 888-04, Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications (R) ASTM A 897/A 897M-03, Specification for Austempered Ductile Iron Castings (R) ASTM A 74-04, Specification for Cast Iron Soil Pipe and Fittings (R)

Metallic-Coated Iron and Steel Products ASTM A 363-03, Specification for Zinc-Coated Galvanized Steel Overhead Ground Wire Strand (R) ASTM A 411-03, Specification for Zinc-Coated Galvanized Low-Carbon Steel Armor Wire (R) ASTM A 474-03, Specification for Aluminum-Coated Steel Wire Strand (R) ASTM A 475-03, Specification for Zinc-Coated Steel Wire Strand (R) ASTM A 641/A 641M-03, Specification for Zinc–Coated Galvanized Carbon Steel Wire (R) ASTM A 755/A 755M-03, Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products (R) ASTM A 809-03, Specification for Aluminum-Coated Aluminized Carbon Steel Wire (R) ASTM A 855/A 855M-03, Specification for Zinc-5 Aluminum-Mischmetal Alloy-Coated Steel Wire Strand (R) A 856/A 856M-03, Specification for Zinc-5 Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire (R) ASTM A 925-03, Specification for Zinc-5 Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground

Wire Strand (R) ASTM A 964-03, Specification for Corrugated Steel Box Culverts (R)

Nonferrous Metals and Alloys ASTM B 166-04, Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire (R) ASTM B 366-04, Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings (R) ASTM B 463-04, Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip (R) ASTM B 464-04, Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe (R) ASTM B 468-04, Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes (R) ASTM B 512-04, Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars (R) ASTM B 535-04, Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube (R) ASTM B 546-04, Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-CrSi Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe (R) ASTM B 625-04, Specification for UNS N08904, UNS N08925, UNS N08031, UNS N08932, UNS N08926, and UNS R20033 Plate, Sheet, and Strip (R) ASTM B 677-04, Specification for UNS N08904, UNS N08925, and UNS N08926 Seamless Pipe and Tube (R) ASTM B 710-04, Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe (R) ASTM B 865-04, Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock (R)

Cement ASTM C 191-04, Test Method for Time of Setting of Hydraulic Cement by Vicat Needle (R) ASTM C 1329-04, Specification for Mortar Cement (R)

Refractories ASTM C 181-03, Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories (R)

Concrete and Concrete Aggregates

ASTM C 672/C 672M-03, Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (R) ASTM C 1017/C 1017M-03, Specification for Chemical Admixtures for Use in Producing Flowing Concrete (R) ASTM C 40-04, Test Method for Organic Impurities in Fine Aggregates for Concrete (R) ASTM C 330-04, Specification for Lightweight Aggregates for Structural Concrete (R) ASTM C 331-04, Specification for Lightweight Aggregates for Concrete Masonry Units (R) ASTM C 341/C 341M-03a, Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic- Cement Mortar and Concrete (R) ASTM C 989-04, Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars (R) ASTM C 1152/C 1152M-03, Test Method for Acid-Soluble Chloride in Mortar and Concrete (R)

Gypsum and Related Building Materials and Systems ASTM C 79/C 79M-04, Specification for Treated Core and Nontreated Core Gypsum Sheathing Board (R) ASTM C 442/C 442M-04, Specification for Gypsum Backing Board, Gypsum Coreboard, and Gypsum Shaftliner Board (R) ASTM C 931/C 931M-04, Specification for Exterior Gypsum Soffit Board (R) ASTM C 960/C 960M-04, Specification for Predecorated Gypsum Board (R) ASTM C 1177/C 1177M-04, Specification for Glass Mat Gypsum Substrate for Use as Sheathing (R) ASTM C 1178/C 1178M-04, Specification for Glass Mat Water-Resistant Gypsum Backing Panel (R) ASTM C 1395/C 1395M-04, Specification for Gypsum Ceiling Board (R)

Mortars and Grouts for Unit Masonry ASTM C 1586-04, Guide for Quality Assurance of Mortars ASTM C 270-03b, Specification for Mortar for Unit Masonry (R)

Concrete Pipe ASTM C 1478M-03, Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric] ASTM C 443-03, Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (R)

ASTM C 443M-03, Specification for Joints for Concrete Pipe, Using Rubber Gaskets [Metric] (R) ASTM C 497M-03a, Test Methods for Concrete Pipe, Manhole Sections, or Tile Metric (R) ASTM C 497M-03b, Test Methods for Concrete Pipe, Manhole Sections, or Tile Metric (R) ASTM C 822-03, Terminology Relating to Concrete Pipe and Related Products (R) ASTM C 1103-03, Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (R) ASTM C 1103M-03, Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines Metric (R) ASTM C 478-03a, Specification for Precast Reinforced Concrete Manhole Sections (R) ASTM C 478M-03a, Specification for Precast Reinforced Concrete Manhole Sections Metric (R) ASTM C 990-03a, Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (R) ASTM C 990M-03a, Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants Metric (R)

Manufactured Masonry Units ASTM C 34-03, Specification for Structural Clay Load-Bearing Wall Tile (R) ASTM C 1420-03a, Practice for Selection, Removal, and Shipment of Manufactured Masonry Units Placed in Usage (R) ASTM C 1532-03a (Includes change to title), Practice for Selection, Removal, and Shipment of Masonry Assemblage Specimens from Existing Construction (R) ASTM C 1552-03a, Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing (R) ASTM C 43-03a, Terminology of Structural Clay Products (R) ASTM C 62-04, Specification for Building Brick Solid Masonry Units Made from Clay or Shale (R) ASTM C 652-04, Specification for Hollow Brick Hollow Masonry Units Made from Clay or Shale (R) ASTM C 902-04, Specification for Pedestrian and Light Traffic Paving Brick (R) ASTM C 1088-04, Specification for Thin Veneer Brick Units Made from Clay or Shale (R) ASTM C 1314-03b, Test Method for Compressive Strength of Masonry Prisms (R)

Thermal Insulation

ASTM C 335-03a, Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation (R) ASTM C 680-03a (Includes change to title), Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs (R)

Dimension Stone ASTM C 629-03, Specification for Slate Dimension Stone (R)

Building Seals and Sealants ASTM C 1536-03, Test Method for Measuring the Yield for Aerosol Foam Sealants (R) ASTM C 564-03a, Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings (R) ASTM C 1442-03, Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus (R)

Advanced Ceramics ASTM C 1326-03, Test Method for Knoop Indentation Hardness of Advanced Ceramics (R)

Paint and Related Coatings, Materials, and Applications ASTM D 6943-03, Practice for Immersion Testing of Industrial Protective Coatings ASTM D 6990-03, Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems ASTM D 2697-03, Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings (R) ASTM D 4827-03, Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography (R) ASTM D 4834-03, Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy (R) ASTM D 2066-03, Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions (R) ASTM D 5324-03, Guide for Testing Water-Borne Architectural Coatings (R)

Road and Paving Materials ASTM D 4695-03, Guide for General Pavement Deflection Measurements (R) ASTM D 5106-03, Specification for Steel Slag Aggregates for Bituminous Paving Mixtures (R) ASTM D 5340-03, Test Method for Airport Pavement Condition Index Surveys (R) ASTM D 5710-03, Specification for Trinidad Lake Modified Asphalt (R)

ASTM D 6433-03, Practice for Roads and Parking Lots Pavement Condition Index Surveys (R) ASTM D 6521-03, Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (Pav) (R) ASTM D 6521-03a, Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (Pav) (R) ASTM D 693-03a, Specification for Crushed Aggregate for Macadam Pavements (R) ASTM D 1752-04 (Includes change to title), Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction (R)

Coal and Coke ASTM D 2013-03, Practice for Preparing Coal Samples for Analysis (R) ASTM D 6518-03a, Practice for Bias Testing a Mechanical Coal Sampling System (R)

Roofing and Waterproofing ASTM D 146-03, Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing (R) ASTM D 227-03, Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing (R) ASTM D 1327-04, Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing (R) ASTM D 1863-03, Specification for Mineral Aggregate Used on Built-Up Roofs (R) ASTM D 2824-04, Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered Without Asbestos (R) ASTM D 3462-03a, Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules (R) ASTM D 3791-04, Practice for Evaluating the Effects of Heat on Asphalts (R) ASTM D 4811-04, Specification for Nonvulcanized Uncured Rubber Sheet Used as Roof Flashing (R) ASTM D 4977-03, Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion (R) ASTM D 5635-04, Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens (R)

Electrical and Electronic Insulating Materials ASTM D 784-03, Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation (R)

ASTM D 3145-03, Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method (R) ASTM D 5537-03, Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray (R)

Packaging ASTM D 4727/D 4727M-03, Specification for Corrugated and Solid Fiberboard Sheet Stock Container Grade and Cut Shapes (R)

Rubber ASTM D 6977-04, Specification for Polychloroprene Examination Gloves for Medical Application ASTM D 3767-03, Practice for Rubber —Measurement of Dimensions (R) ASTM D 1566-04, Terminology Relating to Rubber (R) ASTM D 1646-04, Test Methods for Rubber — Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer ) (R) ASTM D 2000-03a, Classification System for Rubber Products in Automotive Applications (R)

Textiles ASTM D 6961-03, Test Method for Color Measurement of Flax Fiber ASTM D 5426-03, Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints (R) ASTM D 5793-03, Test Method for Binding Sites Per Unit Length or Width of Pile Yarn Floor Coverings (R)

Soil and Rock ASTM D 6939-03, Practice for Brushmattressing ASTM D 2435-03, Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading (R) ASTM D 653-03, Terminology Relating to Soil, Rock, and Contained Fluids (R)

Water ASTM D 4520-03, Practice for Determining Water Injectivity Through the Use of On-Site Floods (R)

Plastics

ASTM D 6988-03, Guide for Determination of Thickness of Plastic Film Test Specimens ASTM D 256-03, Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (R) ASTM D 638-03, Test Method for Tensile Properties of Plastics (R) ASTM D 3418-03, Test Method for Transition Temperatures of Polymers by Differential Scanning Calorimetry (R) ASTM D 4272-03, Test Method for Total Energy Impact of Plastic Films by Dart Drop (R) ASTM D 2578-04, Test Method for Wetting Tension of Polyethylene and Polypropylene Films (R) ASTM D 3307-04, Specification for Perfluoroalkoxy Pfa -Fluorocarbon Resin Molding and Extrusion Materials

Carbon Black ASTM D 3493-04, Test Method for Carbon Black — Oil Absorption Number of Compressed Sample (R) ASTM D 1765-04, Classification System for Carbon Blacks Used in Rubber Products (R) ASTM D 2414-04, Test Method for Carbon Black — Oil Absorption Number (Oan) (R) ASTM D 3053-04, Terminology Relating to Carbon Black (R) ASTM D 5230-04, Test Method for Carbon Black — Automated Individual Pellet Hardness (R) ASTM D 6602-03b, Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both (R)

Halogenated Organic Solvents and Fire Extinguishing Agents ASTM D 4995-04, Specification for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2Trifluoroethane Solvent (R) ASTM D 5248-04, Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane (R) ASTM D 5396-04, Specification for Reclaimed Perchloroethylene (R) ASTM D 5616-04, Specification for Reclaimed Trichloroethylene (R)

Geosynthetics ASTM D 7003-03, Test Method for Strip Tensile Properties of Reinforced Geomembranes ASTM D 7004-03, Test Method for Grab Tensile Properties of Reinforced Geomembranes

Analytical Chemistry for Metals, Ores and Related Materials

ASTM E 1335-03, Test Methods for Determination of Gold in Bullion by Cupellation (R)

Performance of Buildings ASTM E 2267-03, Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings — Indoor Air Quality ASTM E 2342-03, Test Method for Durability Testing of Duct Sealants ASTM E 1605-03, Terminology Relating to Lead in Buildings (R) ASTM E 1190, Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members (R) ASTM E 1554-03, Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization (R) ASTM E 2110-03, Terminology for Exterior Insulation and Finish Systems EIFS (R)

Nondestructive Testing ASTM E 2337-04, Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing ASTM E 2338-04, Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors Without Coating Reference Standards ASTM E 213-04, Practice for Ultrasonic Examination of Metal Pipe and Tubing (R) ASTM E 1165-04, Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging (R) ASTM E 747-04, Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (Iqi) Used for Radiology (R) ASTM E 1001-04, Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves (R)

Color and Appearance ASTM E 1455-03, Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters (R) ASTM E 2302-03a (Includes change to title), Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer (R)

Temperature Measurement ASTM E 235-03, Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability Applications (R)

Hazard Potential of Chemicals ASTM E 2019-03, Test Method for Minimum Ignition Energy of a Dust Cloud in Air (R) ASTM E 1515-03a, Test Method for Minimum Explosible Concentration of Combustible Dusts (R)

Forensic Sciences ASTM E 2292-03, Practice for Investigating Carbon Monoxide Poisoning Incidents

Pesticides and Alternative Control Agents ASTM E 2274-03, Test Method for Evaluation of Laundry Sanitizers and Disinfectants

Thermal Measurements ASTM E 928-03 (Includes change to title), Test Method for Purity by Differential Scanning Calorimetry (R)

Surface Analysis ASTM E 673-03, Terminology Relating to Surface Analysis (R)

Electronics ASTM F 1-03, Specification for Nickel-Clad and Nickel-Plated Steel Strip for Electron Tubes (R)

Medical and Surgical Materials and Devices ASTM F 2345-03, Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads ASTM F 1088-04, Specification for Beta-Tricalcium Phosphate for Surgical Implantation (R)

Business Imaging Products ASTM F 1946-04, Practice for Accelerated Testing of the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window N –filtered Daylight (R)

Sports Equipment and Facilities ASTM F 1292-04, Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment (R) ASTM F 2270-04, Guide for Construction and Maintenance of Warning Track Areas on Sports Fields

Tires ASTM F 538-03, Terminology Relating to the Characteristics and Performance of Tires (R)

ASTM F 377-03, Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires (R)

Consumer Products ASTM F 1148-03, Consumer Safety Performance Specification for Home Playground Equipment (R) ASTM F 2368-04, Specification for Labeling for Wet Mops for Consumer and Institutional Use

Fasteners ASTM A 325-04, Specification for Structural Bolts, Steel, Heat Treated, 120/105 Ksi Minimum Tensile Strength (R) ASTM A 325M-04, Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric] (R) ASTM A 449-04, Specification for Quenched and Tempered Steel Bolts and Studs (R) ASTM A 490-04, Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (R) ASTM A 490M-04, Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] (R) ASTM A 563-04, Specification for Carbon and Alloy Steel Nuts (R) ASTM F 1852-04, Specification for "Twist Off " Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (R)

Plastic Piping Systems ASTM D 2241-04, Specification for Poly (Vinyl Chloride) (PVC) Pressure-Rated Pipe Sdr Series (R) ASTM D 2513-04, Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings (R) ASTM F 905-03 (Includes change to title), Practice for Qualification of Polyethylene Saddle-Fused Joints (R) ASTM F 1335-04, Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (R) ASTM D 3035-03a, Specification for Polyethylene (PE) Plastic Pipe Dr-Pr Based on Controlled Outside Diameter (R)

Electrical Protective Equipment for Workers ASTM F 2320-03, Specification for Rubber Insulating Sheeting ASTM F 855-03, Specifications for Temporary Protective Grounds to Be Used on De-Energized Electric Power Lines and Equipment (R)

Ships and Marine Technology ASTM F 2362-03, Specification for Temperature Monitoring Equipment

Rolling Element Bearings ASTM F 2094-03a, Specification for Silicon Nitride Bearing Balls (R)

Corrosion of Metals ASTM G 15-04, Terminology Relating to Corrosion and Corrosion Testing (R)

Wear and Erosion ASTM G 76-04, Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets (R) ASTM G 99-04, Test Method for Wear Testing with a Pin-on-Disk Apparatus (R)

Weathering and Durability ASTM G 177-03, Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Degree Tilted Surface ASTM G 179-04, Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests

Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres ASTM G 136-03, Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction ®

DIN STANDARDS Construction Materials & Building DIN EN 81-72: 2003 – Safety rules for the construction and installation of lifts – Particular applications for passenger and goods passenger lifts – Part 72: Firefighters’ lifts EURO 109.30 DIN EN 442-3: 2003 – Radiators and convectors – Part 3: Evaluation of conformity EURO 65.60

DIN EN 997: 2003 – WC pans and WC suites with integral trap EURO 130.10 DIN EN 1337-10: 2003 – Structural bearings – Part 10: Inspection and maintenance EURO 87.90 DIN EN 1857: 2003 – Chimneys – Components – Concrete flue liners EURO 123.30

DIN EN 12111: 2003 – Tunnelling machines – Road headers, continuous miners and impact rippers – Safety requirements EURO 109.30 DIN EN 13384-2: 2003 – Chimneys – Thermal and fluid dynamic calculation methods – Part 2: Chimneys serving more than one heating appliance Supersedes DIN 4705-3: 1984 Edn., and DIN V 4705-3: 1997 Edn. EURO 163.90 DIN EN 13558: 2003 – Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes EURO 80.60 DIN EN 13559: 2003 – Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes EURO 80.60 DIN EN 13830: 2003 – Curtain walling – Product standard EURO 102.30 DIN EN 13904: 2003 – Low resistance shower outlets for sanitary tapware EURO 94.70 DIN EN 13905: 2003 – Low resistance shower hoses for sanitary tapware EURO 94.70

Energy & Heat Transfer Engineering DIN EN 676: 2003 – Automatic forced draught burners for gaseous fuels EURO 185.00 DIN EN 12953-11: 2003 – Shell boilers – Part 11: Acceptance tests EURO 116.00

Environment and Health Protection. Safety DIN EN 81-28: 2003 – Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 28: Remote alarm on passenger and goods passenger lifts EURO 80.60 DIN EN 374-2: 2003 – Protective gloves against chemicals and micro-organisms – Part 2: Determination of resistance to penetration EURO 80.60 DIN EN 374-3: 2003 – Protective gloves against chemicals and micro-organisms – Part 3: Determination of resistance to penmeation by chemicals EURO 80.60 DIN EN 379: 2003 – Personal eye protection – Automatic welding filters EURO 109.30 DIN EN 388: 2003 – Protective gloves against mechanical risks EURO 102.30 DIN EN 420: 2003 – Protective gloves – General requirements and test methods EURO 109.30 DIN EN 471: 2003 – High-visibility warning clothing for professional use – Test methods and requirements EURO 109.30 DIN EN 1621-2: 2003 – Motorcyclists’ protective clothing against mechanical impact – Part 2: Motorcyclists’ back protectors – Requirements and test methods EURO 87.90 DIN EN 12260: 2003 – Water quality – Determination of nitrogen – Determination of bound nitrogen (TNb) following oxidation to nitrogen oxides Supersedes DIN V ENV 12260: 1996 Edn. EURO 80.60

DIN EN 12952-12: 2003 – Water-tube boilers and auxiliary installations – Part 12: Requirements for boiler feed water and boiler water quality EURO 87.90 DIN EN 12953-10: 2003 – Shell boilers – Part 10: Requirements for boiler food water and boiler water quality EURO 80.60 DIN EN 14143: 2003 – Respiratory equipment – Self-contained re-breathing diving apparatus EURO 135.80 DIN EN ISO 14915-2: 2003 – Software ergonomics for multimedia user interfaces – Part 2: Multimedia navigation and control EURO 130.10

Fluid Systems and Components for General use DIN EN 10288: 2003 – Steel tubes and fittings for onshore and offshore pipelines – External two-layer extruded polyethylene base coatings Supersedes parts of DIN 30670: 1991 Edn. EURO 130.10 DIN EN 12288: 2003 – Industrial valves – Copper alloy gate valves Supersedes DIN 3352-11 and DIN 3352-12: 1981 Edns. EURO 102.30 DIN EN 13828: 2003 – Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings – Tests and requirements EURO 94.70 DIN EN 14140: 2003 – Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) – Alternative design and construction EURO 130.10 DIN EN 14197-1: 2003 – Cryogenic vessels – Static non-vacuum insulated vessels – Part 1: Fundamental requirements EURO 80.60

Food Technology DIN EN 1784: 2003 – Foodstuffs – Detection of irradiated food containing fat – Gas chromatographic analysis of hydrocarbons EURO 109.30 DIN EN 1785: 2003 – Foodstuffs – Detection of irradiated food containing fat – Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones EURO 102.30 DIN EN ISO 9832: 2003 – Animal and vegetable fats and oils – Determination of residual technical hexane content EURO 94.70 DIN EN 13208: 2003 – Food processing machinery – Vegetable peelers – Safety and hygiene requirements EURO 116.00

Generalities. Terminology. Standardization. Documentation DIN EN 374-1: 2003 – Protective gloves against chemicals and micro-organisms – Part 1: Terminology and performance requirements EURO 72.70 DIN EN 523: 2003 – Steel strip sheaths for prestressing tendons – Terminology, requirements and conformity EURO 80.60

DIN EN 10266: 2003 – Steel tubes, fittings and structural hollow sections – Symbols and definitions of terms for use in product standards EURO 87.90

Health Care Technology DIN EN ISO 17511: 2003 – In vitro diagnostic medical devices – Measurement of quantities in biological samples – Metrological trace ability of values assigned to calibrators and control materials EURO 123.30 DIN EN ISO 18153: 2003 – In vitro diagnostic medical devices – Measurement of quantities in biological samples – Metrological trace ability of values for catalytic concentration of enzymes assigned to calibrators and control materials EURO 94.70

Manufacturing Engineering DIN EN ISO 5817: 2003 – Fusion-Welded joints in steel, nickel, titanium and their alloys (beam welding excluded) – Quality levels for imperfections Supersedes DIN EN 25817: 1992 Edn. EURO 116.00 DIN EN 13858: 2003 – Corrosion protection of metals – Non-electrolytically applied zinc flake coatings on iron or steel components EURO 65.60

Materials Handling Equipment DIN EN 1757-4: 2003 – Safety of industrial trucks – Pedestrian-propelled trucks – Part 4: Scissor lift pallet-trucks EURO 102.30 DIN EN 13414-2: 2003 – Steel wire rope slings – safety – Part 2: Specification for information for use and maintenance to be provided by the manufacturer Supersedes parts of DIN 3088: 1989 Edn. EURO 102.30

Petroleum & Related Technologies DIN EN 14214: 2003 – Automotive fuels – Fatty acid methyl esters (FAME) for diesel engines – Requirements and test methods Supersedes DIN V 51606: 1994 Edn. EURO 80.60 DIN EN 14262: 2003 – Derivatives from coal pyrolysis – Coal tar and pitch based binders and related products: briquetting pitch – Characteristics and test methods EURO 58.70

Textile & Leather Technology DIN EN 12132-2: 2003 – Feather and down – Methods of testing the down-proof properties of fabrics – Part 2: Impact test EURO 58.70 DIN EN 14030: 2003 – Geotextiles and geotextile-related products – Screening test method for determining the resistance to acid and alkaline liquids EURO 58.70

Wood Technology DIN EN 312: 2003 – Particleboard – Specifications Supersedes DIN EN 312-1 to DIN EN 312-4 and DIN EN 312-6: 1996 Edns., and DIN EN 312-5 and DIN EN 312-7 : 1997 Edns. EURO 94.70

DIN EN 636: 2003 – Plywood – Specifications Supersedes DIN EN 636-1 to DIN EN 636-3: 1997 Edns. EURO 80.60

Miscellaneous DIN EN 449: 2003 – Specification for dedicated liquefied petroleum gas appliances – Domestic flueless space heaters (including diffusive catalytic combustion heaters ) EURO 142.80 DIN EN 1939: 2003 – Self-adhesive tapes – Determination of peel adhesion properties EURO 102.30 DIN EN 13298: 2003 – Railway applications – Suspension components – Helical suspension springs, steel EURO 130.10 DIN EN 13598-1: 2003 – Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly (vinyl chloride) (PVC-U), Polypropylene (PP) and ployethylene (PE) – Part 1: Specifications for ancillary fittings including shallow inspection chambers EURO 94.70 DIN EN 13760: 2003 – Automotive LPG filling system for light and heavy duty vehicles – Nozzle – Test requirements and dimensions EURO 109.30 DIN EN 14155: 2003 – Derivatives from coal pyrolysis – Carbon black feedstock – Specifications and test methods EURO 58.70 DIN EN 14156: 2003 – Derivatives from coal pyrolysis – Coal tar based oils: Coal tar fuel – Specifications and test methods EURO 65.60

ISO STANDARDS Earth Moving Machinery ISO 12510: 2004 – Earth-moving machinery – Operation and maintenance – Maintainability guidelines SFr. 67.00 ISO 14401-1: 2004 – Earth-moving machinery – Field of vision of surveillance and rear-view mirrors – Part 1: Test methods SFr. 40.00 ISO 14401-2: 2004 – Earth-moving machinery – Field of vision of surveillance and rear-view mirrors – Part 2: Performance criteria SFr. 61.00

Fasteners ISO 4762: 2004 – Hexagon socket head cap screws SFr. 67.00 ISO 10642: 2004 – Hexagon socket countersunk head screws SFr. 54.00 ISO 21269: 2004 – Hexagon socket head cap screws with metric fine pitch thread SFr. 54.00

Glass Containers ISO 7458: 2004 – Glass containers – Internal pressure resistance – Test methods SFr. 40.00

ISO 7459: 2004 – Glass containers – Thermal shock resistance and thermal shock endurance – Test methods SFr. 47.00 ISO 8113: 2004 – Glass containers – Resistance to vertical load – Test methods SFr. 34.00

Industrial Automation Systems & Integration ISO 9409-1: 2004 – Manipulating industrial robots – Mechanical interfaces – Part 1: Plates SFr. 47.00 ISO 15531-1: 2004 – Industrial automation systems and integration – Industrial manufacturing management data – Part 1: General overview SFr. 116.00

Information Technology ISO/IEC 7816-11: 2004 – Identification cards – Integrated circuit cards – Part 11: Personal verification through biometric methods SFr. 122.00 ISO/IEC TR 9126-4: 2004 – Software engineering – Product quality – Part 4: Quality in use metric SFr. 150.00 ISO/IEC 10118-3: 2004 – Information technology – Security techniques – Hash-functions – Part 3: Dedicated hash-functions SFr. 184.00 ISO/IEC TR 14143-5: 2004 – Information technology – Software measurement – Functional size measurement – Part 5: Determination of functional domains for use with functional size measurement SFr. 110.00 ISO/IEC 14772-2: 2004 – Information technology – Computer graphics and image processing – The virtual reality modeling language (VRML) – Part 2: External authoring interface (EAI) SFr. 142.00 ISO/IEC 15948: 2004 – Information technology – Computer graphics and image processing – Portable network graphics (PNG): Function specification SFr. 172.00 ISO/IEC TR 20943-3: 2004 – Information technology – Procedures for achieving metadata registry content consistency – Part 3: Value domains SFr. 122.00 ISO/IEC 21000-5: 2004 – Information technology – Multimedia framework (MPEG-21) – Part 5: Rights expression language SFr. 208.00

Plastics ISO 11402: 2004 – Phenolic, amino and condensation resins – Determination of free-formaldehyde content SFr. 67.00 ISO 11403-2: 2004 – Plastics – Acquisition and presentation of comparable multipoint data – Part 2: Thermal and processing properties SFr. 54.00

Petroleum Products and Lubricants ISO 3680: 2004 – Determination of flash/no flash – Rapid equilibrium closed cup method SFr. 85.00

ISO 20844: 2004 – Petroleum and related products – Determination of the shear stability of polymercontaining oils using a diesel injector nozzle SFr. 61.00 ISO 20846: 2004 – Petroleum products – Determination of sulfur content of automotive fuels – Ultraviolet fluorescence method SFr. 67.00 ISO 20847: 2004 – Petroleum products – Determination of sulfur content of automotive fuels – Energydispersive X-ray fluorescence spectrometry SFr. 67.00 ISO 20884: 2004 – Petroleum products – Determination of sulfur content of automotive fuels – Wavelength-dispersive X-ray fluorescence spectrometry SFr. 54.00

Road Vehicles ISO 6519: 2004 – Diesel engines – Fuel injection pumps – Trapers for shaft ends and hubs SFr. 40.00 ISO/TR 12350: 2004 – Road vehicles – Injury risk curves for evaluation of occupant protection in side impact SFr. 104.00 ISO 15765-1: 2004 – Road vehicles – Diagnostics on controller area networks (CAN) – Part 1: General Information SFr. 40.00 ISO 16845: 2004 – Road vehicles – Controller area network (CAN) – Conformance test plan SFr. 172.00 ISO/TS 16951: 2004 – Road vehicles – Ergonomic aspects of transport information and control systems (TICS) – Procedures for determining priority of on-board messages presented to drivers SFr. 110.00

Rubber & Rubber Products ISO 35: 2004 – Natural rubber latex concentrate – Determination of mechanical stability SFr. 40.00 ISO 289-4: 2004 – Rubber, unvulcanized – Determinations using a shearing-disc viscometer – Part 4: Determination of the mooney stress-relaxation rate SFr. 61.00 ISO 11344: 2004 – Rubber, raw synthetic – Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography SFr. 91.00 ISO 13363: 2004 – Rubber and plastics hoses for marine-engine wet-exhaust systems – Specification SFr. 61.00

Safety Devices for Protection Against Excessive Pressure ISO 4126-1: 2004 – Safety devices for protection against excessive pressure – Part 1: Safety valves SFr. 104.00 ISO 4126-4: 2004 – Safety devices for protection against excessive pressure – Part 4: Pilot-operated safety valves SFr. 104.00 ISO 4126-7: 2004 – Safety devices for protection against excessive pressure – Part 7: Common data SFr. 122.00

Tractors & Machinery for Agriculture & Forestry ISO 5674: 2004 – Tractors and machinery for agriculture and forestry – Guards for power take-off (PTO) drive-shafts – Strength and wear tests and acceptance criteria SFr. 97.00 ISO 17612: 2004 – Tractors and machinery for agriculture and forestry – Auxiliary-power-transmission connector for the operator station SFr. 54.00 ISO 22368-1: 2004 – Crop protection equipment – Test methods for the evaluation of cleaning systems – Part 1: Internal cleaning of complete sprayers SFr. 40.00 ISO 22368-2: 2004 – Crop protection equipment – Test methods for the evaluation of cleaning systems – Part 2: External cleaning of sprayers SFr. 54.00 ISO 22368-3: 2004 – Crop protection equipment – Test methods for the evaluation of cleaning systems – Part 3: Internal cleaning of tank SFr. 47.00

Welding & Allied Processes ISO 18273: 2004 – Welding consumables – Wire electrodes, wires and rods for welding of aluminium and aluminium alloys – Classification SFr. 47.00 ISO 18274: 2004 – Welding consumables – Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys – Classification SFr. 91.00

Miscellaneous ISO IWA 2: 2003 – Quality management systems – Guidelines for the application of ISO 9001: 2000 In education SFr. 158.00 ISO 446: 2004 – Micrographics – ISO character and ISO test chart no. 1 – Description and use SFr. 54.00 ISO 606: 2004 – Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets SFr. 110.00 ISO 2836: 2004 – Graphic technology – Prints and printing inks – Assessment of resistance to various agents SFr. 54.00 ISO/TS 6090: 2004 – Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder – Detection of phosphatase activity SFr. 61.00 ISO 6360-1: 2004 – Dentistry – Number coding system for rotary instruments – Part 1: General characteristics SFr. 91.00 ISO 6930-2: 2004 – High yield strength steel plates and wide flats for cold forming – Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels SFr. 67.00 ISO 7200: 2004 – Technical product documentation – Data fields in title blocks and document headers SFr. 47.00 ISO 7240-15: 2004 – Fire detection and alarm systems – Part 15: Multisensor fire detectors SFr. 158.00

ISO 8611-1: 2004 – Pallets for materials handling – Flat pallets – Part 1: Test methods SFr. 110.00 ISO/TR 9564-4: 2004 – Banking – Personal identification number (PIN) management and security – Part 4: Guidelines for PIN handling in open networks SFr. 47.00 ISO 10110-17: 2004 – Optics and photonics – Preparation of drawings for optical elements and systems – Part 17: Laser irradiation damage threshold SFr. 40.00 ISO 10426-4: 2004 – Petroleum and natural gas industries – Cements and materials for well cementing – Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure SFr. 73.00 ISO 11087: 2004 – Alpine ski-bindings – Retention devices – Requirements and test methods SFr. 61.00 ISO 13041-1: 2004 – Test conditions of numerically controlled turning machines and turning centres – Part 1: Geometric tests for machines with a horizontal workholding spindle SFr. 122.00 ISO 14122-4: 2004 – Safety of machinery – Permanent means of access to machinery – Part 4: Fixed ladders SFr. 116.00 ISO 14314: 2004 – Reciprocal internal combustion engines – Recoil starting equipment – General safety requirements SFr. 47.00 ISO 14945: 2004 – Small craft – Builder’s plate SFr. 47.00 ISO 15465: 2004 – Pipework – Stripwound metal hoses and hose assemblies SFr. 73.00 ISO 15469: 2004 – Spatial distribution of daylight – CIE standard general sky SFr. 54.00 ISO/TS 15530-3: 2004 – Geometrical product specification (GPS) – Coordinate measuring machines (CMM): Technique or determining the uncertainty of measurement – Part 3: Use of calibrated workpieces or standards SFr. 79.00 ISO 15614-5: 2004 – Specification and qualification on welding procedures for metallic materials – Welding procedure test – Part 5: Arc welding of titanium, zirconium and their alloys SFr. 97.00 ISO 16000-6: 2004 – Indoor air – Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA® sorbent, thermal desorption and gas chromatography using MS/FID SFr. 104.00 ISO 16133: 2004 – Soil quality – Guidance on the establishment and maintenance of monitoring programmes SFr. 122.00 ISO 16609: 2004 – Banking – Requirements for message authentication using symmetric techniques SFr. 110.00 ISO 16700: 2004 – Microbeam analysis – Scanning electron microscopy – Guidelines for calibrating image magnification SFr. 79.00 ISO/TR 16880: 2004 – Cranes – Bridge and gantry cranes – International standards for design and manufacturing requirements and recommendations SFr. 54.00 ISO 16916: 2004 – Tools for moulding – Tool specification sheet or injection moulds SFr. 54.00

ISO 17064: 2004 – Wood based panels – Fibreboard, particleboard and oriented strand board (OSB) – Vocabulary SFr. 34.00 ISO 17664: 2004 – Sterilization of medical devices – Information to be provided by the manufacturer for the processing of resterilizable medical devices SFr. 85.00 ISO 17874-1: 2004 – Remote-handling devices for radioactive materials – Part 1: General requirements SFr. 104.00 ISO 18175: 2004 – Non-destructive testing – Evaluating performance characteristics of ultrasonic pulseecho testing systems without the use of electronic measurement instruments SFr. 97.00 ISO 21572: 2004 – Foodstuffs – Methods for the detection of genetically modified organisms and derived products – Protein based methods SFr. 97.00 ISO 22857: 2004 – Health informatics – Guidelines on data protection to facilitate trans-border flows of personal health information SFr. 150.00

Related Documents

Standards List
November 2019 6
Standards
November 2019 79
Standards
November 2019 68