Imi-sfb-0608_lres

Sensors, Switches, Transmitters & Accessories

Vibration Monitoring Instrumentation For Condition Monitoring and Predictive Maintenance of Industrial Machinery

IMI Sensors

Toll Free in USA 800-959-4464

716-684-0003

www.imi-sensors.com

Industrial Vibration Monitoring Instrumentation Every IMI Sensor Features:

Low-Cost Industrial ICP ® Accelerometers ■ ■ ■ ■ ■

Ideal for permanent installations & use with continuous, on-line monitoring systems Promote safety when installed in hazardous or inaccessible locations Connect through switch or junction box for route-based data collection schemes NIST traceable, single-point calibration at 100 Hz Hazardous area approved versions available

Quartz, Low Cost Model 627A01 ■ 100 mV/g ■ 10 mV/(m/s2) ■ 0.3 to 10k Hz ■ 20 to 600k cpm

Ceramic, Low Cost Model 601A01 ■ 100 mV/g ■ 10.2 mV/(m/s2) ■ 0.3 to 10k Hz ■ 16 to 600k cpm ■ 7/8” hex x 1.94” (49.3 mm) H ■ 2.8 oz (80 gm)

Small Size, Low Cost Model 608A11 ■ 100 mV/g ■ 10.2 mV/(m/s2) ■ 0.4 to 10k Hz ■ 26 to 600k cpm ■ 9/16” hex x 2.5” (63.5 mm) H ■ 1.8 oz (51 gm)

Precision Industrial ICP ® Accelerometers ■ ■

■

■

Ideal for roving use with route-based data collectors Utilize for effective machinery analysis & fault diagnostics Velocity output, temperature output, high temperature (+325 °F/ +163 °C), & hazardous area approved version available NIST traceable calibration through full frequency range

Ceramic, High Sensitivity Model 626B02 ■ 500 mV/g ■ 51 mV/(m/s2) ■ 0.2 to 6000 Hz ■ 12 to 360k cpm ■ 1-3/16” hex x 2.19” (55.6 mm) H ■ 7.0 oz (199 gm)

■ ■

■ ■

Durable, stainless steel construction Welded, hermetic sealing to withstand dirty, oily, industrial, and submerged environments Electrical protection from RFI, EMI, ESD, and mis-wiring Total Customer Satisfaction Guarantee

Small Size, Low Cost Model 603C01 ■ 100 mV/g ■ 10 mV/(m/s2) ■ 0.4 to 10k Hz ■ 26 to 600k cpm

Low-Profile, Low Cost Model 602D01 ■ 100 mV/g ■ 10.2 mV/(m/s2) ■ 0.5 to 8000 Hz ■ 30 to 480k cpm ■ 1.65” L x 0.74” W x 0.85” H (41.9 x 18.8 x 21.6 mm) ■ 2.75 oz (78 gm) Ceramic, General Purpose Model 625B01 ■ 100 mV/g ■ 10.2 mV/(m/s2) ■ 0.2 to 10.5k Hz ■ 12 to 630k cpm ■ 1.38” Dia x 1.13” H (35.1 x 28.7 mm) ■ 5.1 oz (145 gm)

Quartz, General Purpose Model 624A01 • 100 mV/g • 10 mV/(m/s2) • 0.8 to 10k Hz • 48 to 600k cpm

Ceramic, General Purpose Model 622A01 ■ 100 mV/g ■ 10.2 mV/(m/s2) ■ 0.2 to 10k Hz ■ 12 to 600k cpm ■ 7/8” hex x 2.06” (52.3 mm) H 3.3 oz (94 gm)

Quartz, General Purpose Model 628F01 • 100 mV/g • 10 mV/(m/s2) • 0.3 to 12k Hz • 20 to 720k cpm

Multi-Axis Industrial ICP ® Accelerometers ■

■

■

■

Measure acceleration simultaneously in up to three axes Through-bolt mounting for simplified alignment Simultaneous radial and axial bearing vibration measurements Interface directly with vibration data collectors and FFT analyzers

Swivel-Mount ICP ® Accelerometers ■

■ ■ ■ ■ ■ ■

Easy-to-install, patented, swivel mount design (US Patent No. 6,435,902) Cable rotates to any desired orientation Smaller & less costly than ring-style sensors Electrically protected from saturation problems Excellent for use on high-speed rotating machinery & spindles Available with temperature output Hazardous area approved versions available

Triaxial Model 629A61 ■ 100 mV/g (all axes) ■ 10.2 mV/(m/s2) ■ 0.8 to 8000 Hz (all axes) ■ 48 to 480k cpm ■ 1.5” L x 1.5” W x 0.82” H (38.1 x 38.1 x 20.8 mm) ■ 4.9 oz (139 gm)

Spindler® Model 607A61 ■ 100 mV/g ■ 10.2 mV/(m/s2) ■ 0.5 to 10k Hz ■ 30 to 600k cpm ■ 9/16” hex x 1.0” (25.4 mm) H ■ 1.1 oz (31 gm)

Triaxial, Low Cost Model 604B31 ■ 100 mV/g (all axes) ■ 10.2 mV/(m/s2) ■ 0.5 to 5000 Hz (all axes) ■ 30 to 300k cpm ■ 1.38” Dia x 1” H (35.1 x 25.4 mm) ■ 4.4 oz (124 gm)

Swiveler® Model 607A11 ■ 100 mV/g ■ 10.2 mV/(m/s2) ■ 0.5 to 10k Hz ■ 30 to 600k cpm ■ 9/16” hex x 0.97” (24.6 mm) H ■ 1.1 oz (31 gm)

Biaxial, Low Cost Model 605B61 ■ 100 mV/g (all axes) ■ 10.2 mV/(m/s2) ■ 0.5 to 5000 Hz ■ 30 to 600k cpm ■ 1.38” Dia x 1” H (35.1 x 25.4 mm) ■ 4.0 oz (113.3 gm)

Swiveler® Model 607A01 ■ 100 mV/g ■ 10.2 mV/(m/s2) ■ 0.5 to 10k Hz ■ 30 to 600k cpm ■ 7/8” hex x 1.23” (31.2 mm) H ■ 3.7 oz (105 gm)

IMI Sensors 4-20 mA Industrial Vibration Sensors, Transmitters, Switches & Alarms ■ ■ ■ ■ ■

Adapts analog vibration signals to process monitoring instruments Facilitates low-cost, continuous vibration monitoring Connects to PLC, alarm & SCADA systems Two-wire, loop-powered Outputs proportional to peak velocity, rms velocity, or rms acceleration

4-20 mA Vibration Sensors Series 640B ■ 2-wire, loop powered ■ Top or side exit connector ■ Hazardous area approved models available (top exit only) RFI/EMI protected ■ Swivel mounting (patented) available ■ High temperature and temperature output versions available

Electronic Vibration Switch Model 685B ■ Built-in or remote accelerometer ■ Dual relays with time delay ■ Analog output signal for diagnostics ■ 4-20 mA overall vibration output ■ Calibration signal insertion for accurate set-up ■ AC or DC-powered (factory set)

■ ■ ■ ■

Optional analog vibration output signal for diagnostics Optional temperature output signal Optional raw vibration output signal High temperature models available to +257 °F (+125 °C)

Indicator/Alarm Series 683A ■ Provides loop power for two-wire 4-20 mA sensors ■ Optional version provides ICP® sensor excitation ■ Four-digit, high visibility LED display ■ Offers up to four, user-programmable set points with relay outputs ■ Time delay feature eliminates false alarms due to momentary upsets ■ Optional 4-20 mA retransmission

Smart Vibration Switch Series 686B01 (US Patent Pending) ■ Universal, AC or DC-powered ■ Hermetically sealed ■ Built-in accelerometer ■ Microprocessor controlled ■ Two-wire simplicity ■ USB programmable threshold, time delay & relay

Vibration Transmitters & Bearing Fault Detectors ■ ■

Interface vibration signals with PLC, alarm & SCADA systems Monitor bearing condition, gearbox health, imbalance and misalignment

■

Detect faults in bearings and gears due to wear, loss of lubrication, contamination, impacting and cavitation

NEW

Vibration Transmitter Model 682A03 ■ Accepts ICP® accelerometer input ■ 4-20 mA output for rms acceleration, peak velocity, or peak-to-peak displacement with filtering options ■ Analog vibration output signal for fault diagnostics ■ Additional 4-20 mA output for temperature available

Bearing Fault Detector Model 682A05 (US Patent No. 6,889,553) ■ Accepts ICP® accelerometer input ■ Detects impacting faults due to bearing & gear problems ■ Provides dual 4-20 mA signals for peaks & overall vibration ■ Provides analog vibration output signal for fault diagnostics

Universal Transmitter Model 682A06 ■ Provides loop power for two-wire, 4-20 mA sensors & transmitters ■ Accepts mA, VDC, RTD, TC, linear resistance & potentiometer inputs ■ Delivers current & voltage output signals ■ Offers two set points with Form A relay outputs (2 amp AC, 1 amp DC) ■ Fully programmable via detachable push button display (Model 070A80)

High-Temperature, Charge Output Accelerometer Kits ■ ■ ■

■

Kits include charge output accelerometer, charge converter, and high temperature cable Survive elevated surface or ambient temperatures Ideal for monitoring paper machines, steam handling systems, gas turbines, engines, & in steel mills Operate up to +900 °F (+482 °C)

(+325 °F/+163 °C) ICP® Accelerometer Model HT622A01 ■ 100 mV/g ■ 10.2 mV/(m/s2) ■ 0.2 to 8000 Hz ■ 12 to 480k cpm ■ -65 to +325 °F (-54 to +163 °C) ■ 7/8” hex x 2.0“ (50.8 mm) H ■ 3.3 oz (93 gm)

Armored Teflon Cable Model 045M06 ■ 10 ft (3 m length) ■ 2-pin, military-style connectors

Kit Model 600A06 600A08 600A02 600A03 600A07 600A09

(+900 °F/+482 °C) Accelerometer Kit Model 600A13 Includes sensor, hardline cable & differential charge converter ■ 100 mV/g ■ 10.2 mV/(m/s2) ■ 2 to 8500 Hz ■ 120 to 510k cpm ■ -65 to +900 °F (-54 to +482 °C)

Reciprocating Machinery Protector Model 649A01 (US Patent No. 7,171,313) ■ Detects faults & mechanical looseness in reciprocating compressors ■ Improves on existing impact monitoring technology ■ Provides continuous trending, with alarm & alert levels for early warning ■ USB programmable set points & alarm levels optimize performance ■ Hermetically sealed, loop-powered design

Sensitivity 10 mV/g (1 mV/(m/s2) 10 mV/g (1 mV/(m/s2) 100 mV/g (10 mV/(m/s2) 100 mV/g (10 mV/(m/s2) 1000 mV/g (10 mV/(m/s2) 1000 mV/g (10 mV/(m/s2)

Cable Type Teflon® Armored Teflon® Teflon® Armored Teflon® Teflon® Armored Teflon®

In-Line Charge Converters Series 422E ■ In-line charge converters ■ Operate with ICP® sensor signal conditioners ■ Choice of many charge conversion values ■ Single ended & differential styles

Industrial Vibration Monitoring Instrumentation Switch Boxes, Enclosures and Intrinsic Safety Barriers ■ ■ ■ ■

Simplify data collection by routing sensor cables to one central location Promote data collection safety by keeping workers out of hazardous areas Access more data points in less time Versions from 1 to 48 channels

Model 691A50/12 BNC Termination Box For use with data collectors that supply ICP® sensor power ■ 12 input channels via terminal strip ■ 12 output channels via BNC’s ■ NEMA-4X (IP66) enclosure ■

Model 691B42 Rotary Switch Box

Model 691A51 Switch Box

For use with data collectors that supply ICP® sensor power ■ 12 input channels via terminal strip ■ BNC output connectors for switched vibration and temperature signals ■ Versions to accommodate up to 48 channels ■ NEMA-4X (IP66) enclosure ■

For use with data collectors that supply ICP® sensor power ■ 1 to 4 input channels via terminal strip ■ 1 to 4 output channels via BNC ■ NEMA - 4x (IP66) Enclosure ■

Intrinsic Safety Barriers (Zener Barriers) Utilize Zener diodes to limit amount of electrical energy at sensor ■ Designed for use with ICP® sensors or loop powered 4-20 mA sensors ■ Eliminate the risk of an electrical arc, or spark, at the hazardous location ■ Up to 24 modules per enclosure ■

Cables, Magnets, Mounting Hardware, Accessories Magnetic Mounting Bases & Adhesive Mounting Pads ■

■ ■ ■

Cable Assemblies for Industrial Accelerometers

Magnetic temporary installations during route data collection Mounting pads for permanent installation Styles for flat or curved surface mounting Versions to accommodate virtually any size sensor

General purpose polyurethane or high temperature Teflon® ■ Rugged military-style connectors in metal or plastic ■

■ ■

Custom Cable Assemblies

Model 687A01 Portable Vibration Meter ■ ■ ■ ■

Made-to-order lengths Overnight delivery

Styles for virtually any installation requirement ■ Versions to interface with most data collectors ■ Shielded for noise immunity ■

Measures rms vibration levels 3-1/2 digit LCD display Headphones offer audible monitoring Supplied with Model 603C01 industrial ICP® accelerometer, coiled cable & magnet

New Model 699A02 Portable 1g Handheld Shaker Verifies Sensor Performance & Calibration at the Machine Calibrates permanently mounted accelerometers at the machine ■ Verifies system performance ■ Confirms operation of cables, switching devices and monitoring systems ■ Meets NIST traceability requirements ■ Outputs 1g pk or rms; operates at 159.2 Hz ■ Accepts sensors up to 250 gm (8.8 oz) ■ Can perform up to 1,600 operating cycles in field without loss of battery power ■

3425 Walden Avenue, Depew, NY 14043-2495 USA Toll Free in USA 800-959-4464 24-hour SensorLineSM 716-684-0003 Fax 716-684-3823 E-mail [email protected] Web Site www.imi-sensors.com ISO 9001:2000 CERTIFIED ■ A2LA ACCREDITED to ISO 17025 © 2008 PCB Group, Inc. In the interest of constant product improvement, specifications are subject to change without notice. PCB, ICP, Modally Tuned, Spindler, Swiveler and TORKDISC are registered trademarks of PCB Group. SoundTrack LXT, Spark and Blaze are registered trademarks of PCB Piezotronics. SensorLine is a service mark of PCB Group. All other trademarks are properties of their respective owners. IMI-SFB-0608

Printed in U.S.A.

Indus t Exclu ry sive!

The IMI Sensors Division of PCB® Piezotronics, Inc. specializes in the development, application, and support of industrial vibration sensors, transmitters, meters, and accessories for machinery condition monitoring and predictive maintenance requirements. This product focus, coupled with the strengths and resources of PCB®, permits the IMI Sensors division to offer exceptional customer service, 24-hour technical assistance, and a Total Customer Satisfaction guarantee.

Visit www.pcb.com to locate your nearest sales office