How To Boot Kalyway Usb

How to boot Kalyway 10.5.2 from a USB Flash Drive: Special thanks to Onetrack for the trick

This cuts the install time in half.

1. Set the BIOS to boot from USB-HDD first and set your USB drive as the first boot drive (you need BOTH settings!) 2. Boot to the Leopard desktop 3. Put your Kalyway 10.5.2 DMG on the desktop 4. Insert your USB Flash Drive 5. In Disk Utility, click on the Flash Drive (the root, not the partition name)

a. Click on the Restore tab b. Select your Kalyway DMG as the Source (you can drag-anddrop the files for both this and the next step) c. Select your Flash Drive (the partition name, not the root this time) as the Destination d. Check the "Erase Destination" box e. Click the Start button

6. Upon completion, install Chameleon EFI to the USB Flash Drive (available in the original tutorial package, in the Cloning folder) 7. Reboot and Kalyway will boot up (follow the guide from there)

You need, at minimum, a 4GB USB Flash Drive. Those run about $15 on Newegg. I have a fast model; it only took about 10 minutes to install Leopard, plus the initial bootup to Kalyway was extremely fast. Note that the "one minute remaining" message during installation still takes forever, haha. This is just a simple trick to increase the speed at which Leopard is installed. Enjoy!