High power HV power supply module High performance modular design
NEW
W series
120W . 200W . 300W . 350W
> Compact · Light weight > Remote control · monitor > CC · CV automatic crossover > High efficiency > Full protection for output short circuit and arc > Wide output lineup
SUMMARY The W series is a compact, high power module with AC input. It is best suited for CRT evaluation, x-ray systems, and capacitor charging applications. Equipped with full remote control capabilities and monitors, it features a wide range of outputs from 500V to 40kV / 120W to 350W.
LINEUP Output Voltage (kVdc)
0 0 0 0 0 0 0 0 0 0 0
to to to to to to to to to to to
0.5 1 1.5 3 5 10 20 30 33 35 40
120W
200W
300W to 350W Output Current Model (mA)
Output Current (mA)
Model
Ripple
Output Current (mA)
Model
Ripple
0 to 240 0 to 120
W1-0.5* W1-1*
0.2% 0.2%
0 to 400 0 to 200
W2-0.5* W2-1*
0.5% 0.2%
0 0 0 0 0 0 0 0
W1-3* W1-5* W1-10* W1-20* W1-30* W1-33* W1-35* W1-40*
0.2% 0.2% 0.2% 0.2% 0.5% 0.5% 0.5% 0.5%
0 0 0 0 0
W2-3* W2-5* W2-10* W2-20* W2-30*
0.2% 0.2% 0.2% 0.2% 0.5%
0 0 0 0 0 0 0 0
W2-40*
0.5%
0 to 8.7
to to to to to to to to
40 24 12 6 4 3.5 3.3 3
to to to to to
67 40 20 10 6.7
0 to 5
to to to to to to to to
700 350 200 117 70 35 17.5 11.7
Ripple
W3-0.5* W3-1* W3-1.5* W3-3* W3-5* W3-10* W3-20* W3-30*
0.5% 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% 0.5%
W3-40*
0.5%
*P for Positive, N for Negative Polarity
SPECIFICATIONS Input Voltage
Protection
Output Voltage Via external voltage source 0 to 10V or external Control 5kΩ potentiometer
Protection against overvoltage, over current, short circuit, arc and over temperature
Efficiency
80% TYP
Voltage Regulation
Line : ±0.02%(of max voltage for Input ±10% change) Load : 0.02%(of max voltage for full load change)
Temperature range Operating : 0 to + 50°C Storage : -40 to + 85°C
Current Regulation
Line : ±0.1%(of max current for Input ±10% change) Load : 0.2%(of max current for full load change)
HV Output Cable 2.5m HV shielded cable
Stability
0.02%/Hr, 0.05%/8Hr(at voltage operation) 0.05%/Hr, 0.1%/8Hr(at current operation)
Temperature coef.
0.02%/°C(at voltage operation) 0.05%/°C(at current operation)
Monitor
0 to 10V, ±1%(at max rated output)
High Voltage ON/OFF
Short = HV ON, Open = HV OFF
AC115V ±10% 50/60Hz
AC Input Cable
Signal Input Connector(assorted) Subminiature D-type Connector 25 pin • Voltage, Current Program(0 to 10V, 0 to 5kΩ) • Voltage, Current Monitor(0 to 10V) • HV ON/OFF • Inter lock • HV status • 10.24V reference
*These specifications are at the maximum rated output after a warm-up period unless otherwise specified.
The external appearance and specifications of all products shown in this catalog are subject to change without notice.
18
2.5m 3-wire line cord
DIMENSIONS inch(mm) 1.87 (47.6)
#6-32 BLIND INSERTS Depth 0.23(5.8)
3.75(95.2)
1.57 (40)
[W1]
FAN
0.59(15)
0.95 (24)
[W2] [W3]
3.75(95.2)
1.57 (40) #6-32 × 0.5 STUDS
9(228.6)
0.42 (10.7)
1.18(30)
FAN
9(228.6)
3.75(95.2)
3.1(80)
GND STUD #6-32
SIDE
HV OUTPUT CONNECTOR
FRONT
5.9(150)
TOP
CONTROL CONNECTOR
GND STUD #6-32
HV OUTPUT CONNECTOR
#6-32 Threaded Inserts Depth 0.23(5.8)
SIDE
1.5 (38.1)
0.5 (12.7)
6(152.4)
2.19
FRONT
3.14(81)
9.84(250)
AIR INTAKE
0.5 (12.7)
(55.6)
AC INPUT CONNECTOR
H 3.54(90)
8.66(220)
AIR INTAKE
9.65(245)
CONTROL CONNECTOR
W 4.92(125) AC INPUT CONNECTOR
2.95 (75)
3.75 (95.2)
TOP
1.34 (34.1)
#6-32 Threaded Inserts Depth 0.23(5.8)
OPTIONS L(100V) Input Voltage AC 100V±10% L(200V) Input Voltage AC 200V±10% L(230V) Input Voltage AC 230V±10% *When ordering, please suffix L Mark(option mark) to the model number. {e.g.}W1-0.5P-L(230V)
For products
www.matsusada.com/product
For contact
www.matsusada.com/contact
San Jose Office : 2570 N.First Street Suite 200 San Jose, CA 95131 Dallas Office : 5430 LBJ Freeway, Suite 1200 Dallas, TX 75240 International Office : Kyoto-City, Kyoto Japan Tel: +1-408-273-4573 Fax: +1-408-273-4673 Tel: +1-972-663-9336 Fax: +1-972-663-9337 Tel: +81-75-229-6355 Fax: +81-75-229-6366 New York Office : 80 Orville Drive Suite 100 Bohemia, NY 11716 Headquarters : 745 Aoji-cho Kusatsu Shiga 525-0041 Japan Tel: +1-631-244-1407 Fax: +1-631-244-1496 Tel: +81-77-561-2111 Fax: +81-77-561-2112
1106-02A
19