He Capacitors

High Energy Corporation Contents HF HIGH VOLTAGE CERAMIC WATER COOLED CAPACITORS: PWC SERIES...........................

2

LOW INDUCTANCE, HIGH RF POWER DOUBLE CUPS: SPHT SERIES........................................

3

RF TRANSMITTING CAPACITORS: AN OVERVIEW..................................................................... HT59 SERIES......................................................................... HT57 SERIES......................................................................... HT50, HT58, & HH58 SERIES............................................ HT53, HT54, & HT55 SERIES............................................. OTHER TRANSMITTING CERAMIC CAPACITORS...............

4 5 6 7 8 9

HIGH VOLTAGE CERAMIC CAPACITORS FOR DC APPLICATIONS: EPSL SERIES....................

10

HIGH VOLTAGE FEED THRU CAPACITORS: SPFT & SPTT SERIES..............................................

11

CUSTOMIZED CERAMIC CAPACITORS...........................................................................................

12

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation HF HIGH VOLTAGE CERAMIC WATER COOLED CAPACITORS FOR HIGH POWER DENSITY PWC SERIES

SPECIFICATIONS:

HIGH ENERGY CORPORATION’S

LINE OF H.F. WATER COOLED CERAMIC

CAPACITORS ARE DESIGNED FOR USE IN APPLICATIONS REQUIRING: SPECIAL CAPACITOR DESIGN REDUCES TERMINAL SELF-

INDUCTANCE TO PERMIT HIGHER FREQUENCY OPERATION.

A HUMIDITY

RESISTANT, NON-CONDUCTIVE COATING AND A LONGER FLASHOVER PATH ASSURES SAFE HIGH VOLTAGE OPERATION IN FREE AIR.

UNITS FEATURE INCREASED POWER DENSITY THROUGH WATERCOOLING AND RUGGED MECHANICAL CONSTRUCTION FOR MAXIMUM RELIABILITY.

THESE

Operating –550C To + 850C Storage –550C To +1250C

Capacitance Tolerance: Dissipation Factor: Dielectric Strength Test:

Listed Optional

Insulation Resistance: Temperature Coefficient: Terminals: Humidity Protection: Marking:

HIGH CURRENTS · HIGH KVA RATINGS · HIGH WORKING VOLTAGES

THIS

Temperature Range:

HIGH TECHNOLOGY CAPACITORS ARE USED EXTENSIVELY IN

INDUCTION HEATING, DIELECTRIC HEATING, H.F. WELDING EQUIPMENT,

±20% ±10%

0.05% Maximum. All Capacitors Will Withstand An AC Potential Of 1.4 Times Rated Working Voltage For 10 Seconds At A Temperature Of 250C. 10,000 Megohms Minimum. All Listed Are N-750, Others Available. Brass Contact Plate – Silver Plated. Non-Conductive Silicone Coating. Capacitors Are Marked With “HEC”, Capacitor Type, Capacitance, Capacitance Tolerance, Rated PK Working Voltage, Max. Frequency, Max. KVAr, And Current.

AND A VARIETY OF SPECIALIZED APPLICATIONS.

WATER COOLED SPECIFICATIONS RATED VOLTAGE 12KVPK 14KVPK 14KVPK 14KVPK 16KVPK 16KVPK 18KVPK 20KVPK

I* MAX 150 A 200 A 250 A 250 A 250 A 250 A 250 A 250 A

KVA* MAX 1275 2000 3000 2500 2830 2830 2500 3000

FREQ* MAX(MHz) 0.56 0.64 0.65 0.53 0.70 0.58 0.52 0.66

CAP 5000pF 5000pF 7500pF 7600pF 5000pF 6000pF 7600pF 5000pF

P/N PWC12502MA PWC14502MA PWC14752MA PWC14762MA PWC16502MA PWC16602MA PWC18762MA PWC20502MA

A 3.74 5.32 5.32 ** 5.32 5.32 ** 5.32

DIMENSIONS B C D 4.18 8.66 2.75 5.83 9.76 4.00 5.83 11.38 4.00 5.83 11.93 4.00 5.83 9.84 4.00 5.83 10.70 4.00 5.83 16.54 4.00 5.83 11.25 4.00

E 4.53 5.28 5.28 5.28 5.28 5.28 5.28 5.28

F 1.50 2.00 2.00 2.00 2.00 2.00 2.00 2.00

NOTE: THE TABLE TO THE LEFT REPRESENTS ONLY PART OF OUR PRODUCT CAPABILITY.

PLEASE

CONTACT THE FACTORY FOR DIFFERENT MOUNTING REQUIRE-

MENTS, INCLUDING DRAIN VALVES.

*These maximum ratings are dependent on each other. Refer to factory for relationships of I, KVA, and frequency. ** Capacitors noted have square base as shown.

M17 FERRULE AND SLEEVE NUT, EACH FITTING

60

B

COATING FOR MOISTURE PROTECTION

F 5.00”

WATER OUTLET (6) 7M5 THD, HOLES ON A 1.18” D.B.C. (1) ON CENTER

E+/- 0.03

3.86”

C+/-0.125 D

60

WATER A

ROUND BASE

SQUARE BASE

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation CERAMIC FILTER CAPACITOR WITH LOW INDUCTANCE & HIGH RF POWER CAPABILITY

SPHT SERIES

HIGH ENERGY CORPORATION’S BROAD LINE OF RF RATED CERAMIC CAPACITORS ARE DESIGNED OR USE IN APPLICATIONS REQUIRING: HIGH CURRENTS · HIGH KVA RATINGS · HIGH WORKING VOLTAGES

SPECIFICATIONS:

Temperature Range:

Operating –550C to + 850C Storage –550C to +1250C

Insulation Resistance:

10,000 Megohms Minimum.

Dissipation Factor:

0.1% to .2% Maximum Depending On The TC Of The Material.

Terminals:

Silver Plated.

Dielectric Strength Test:

All Capacitors Will Withstand A DC Potential Of 1.5 Times Rated Working Voltage For 10 Seconds At A Temperature Of 250C.

Humidity Protection:

Ceramic Suraces Are Coated With Phenolic Resin.

Marking:

Capacitors Are Marked With “HEC”, Capacitor Type, Capacitance, Capacitance Tolerance, Rated Working Voltage, TC Characteristic, And Date Code.

1.378 (35mm)

1.575 (40mm)

1.575 (40mm)

2.756 (70mm)

5.512 (140mm)

3.518 (100mm)

M6 THD.

M8 x 1.25 THD.

SUFFIX A

SUFFIX B

SELECTED* SUFFIX ‘A’ 20 KVAr POWER DISKS

M8 x 1.25 THD.

SUFFIX C SELECTED* SUFFIX ‘C’ 90 KVAr POWER DISKS

MAXIMUM MAXIMUM

MAXIMUM

MAXIMUM

CERAMIC

CAP

PART

VOLTAGE

CURRENT

CERAMIC

CAP

PART

VOLTAGE

CURRENT

TC

(pF)

NUMBER

(KVpk)

(Arms)

TC

(pF)

NUMBER

(KVpk)

(Arms)

NPO

50

SPHT9500MA

14

16

NPO

300

SPHT9101MC

14

45

100

SPHT9101MA

14

16

500

SPHT9501MC

14

45

160

SPHT9161MA

13

16

1000

SPHT9301MC

13

45

200

SPHT9201MA

14

16

1200

SPHT9401MC

14

45

500

SPHT9501MA

13

16

2000

SPHT9202MC

13

45

1000

SPHT9102MA

11

16

3000

SPHT9161MC

11

45

N-750

SELECTED* SUFFIX ‘B’ 40 KVAr POWER DISKS

NOTES:

MAXIMUM MAXIMUM

1. Contact the manufacturer for higher capacitance customized

PART

VOLTAGE

CURRENT

parts made from ceramic bodies not listed.

(pF)

NUMBER

(KVpk)

(Arms)

100

SPHT9101MB

14

35

200

SPHT9201MB

13

35

CERAMIC

CAP

TC NPO

N-750

N-750

400

SPHT9401MB

12

35

500

SPHT9501MB

14

35

1000

SPHT9102MB

13

35

1600

SPHT9161MB

11

35

2. Reactive KVAr ratings can be calculated from the given current. 3. Capacitance tolerance is +/-20% with letter ‘M’ as second to last in part P/N. For +/-10% use ‘K’, for +/-5% use J. 4. Do not exceed the surface temperature of 1000C.

*A continuous range of capacitance is available between the listed values. Call manufacturer for all other part numbers and ordering information. High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation RF TRANSMITTING CAPACITORS: GENERAL INFORMATION H IGH ENERGY CORPORATION’S BROAD LINE OF RF RATED CERAMIC

CAPACITORS ARE DESIGNED FOR USE IN APPLICATIONS REQUIRING:

H IGH CURRENTSIH IGH KVA RATINGSIH IGH WORKING VOLTAGES THE SPECIAL CAPACITOR DESIGN REDUCES TERMINAL SELF INDUCTANCE TO PERMIT HIGHER FREQUENCY OPERATION. A HUMIDITY RESISTANT NON-CONDUCTIVE COATING AND LONG FLASHOVER PATH ASSURES SAFE HIGH VOLTAGE OPERATION IN FREE AIR. UNITS FEATURE A CHOICE OF TEMPERATURE -CAPACITANCE (TC)

CHARACTERISTICS AND RUGGED MECHANICAL CONSTRUCTION FOR MAXIMUM RELIABILITY.

THESE HIGH TECHNOLOGY CAPACITORS ARE USED EXTENSIVELY IN TRANSMITTERS, ANTENNAS, INDUCTION HEATERS, X-RAY, DIATHERMY,

Capacitance Change (%)

WELDING EQUIPMENT, AND A VARIETY OF SPECIALIZED APPLICATIONS.

N5

N33

SPECIFICATIONS: 25

00

0

N750

NPO

Temperature Range:

Operating –550C To + 850C Storage –550C To +1250C

Capacitance Tolerance:

From +/-2.5% To +/-20% And From +/-0.25pF To +/-1pF.

Dissipation Factor:

0.1% To 1.5% Maximum Depending On The TC Of The Material (See Chart At Left).

Dielectric Strength Test:

All Capacitors Will Withstand An AC Potential Of 1.5 Times Rated Working Voltage For 10 Seconds At A Temperature Of 250C.

Temperature ( 0C)

Ceramic Body Style Body Style (TC) Maximum (Temperature Coef Dissipation Factor CLASS I NPO 0.1% AT 1MHz N-750 0.1% AT 1MHz N-2200 0.2% AT 1MHz N-3300 0.2% AT 1MHz N-5250 0.3% AT 1MHz CLASS II X5T 1.5% AT 1KHz X5V 1.5% AT 1KHz

TC Tolerance* +/-60ppm/0C** +/-120ppm/0C +/-500ppm/0C +/-500ppm/0C +/-1000ppm/0C ——-

Insulation Resistance:

10,000 Megohms Minimum.

Terminals:

Silver Plated.

Humidity Protection:

Non-Conductive Coating.

Marking:

Unless Otherwise Specified By Customer, Capacitors Are Marked With “HEC”, Capacitor Type, Capacitance, Capacitance Tolerance, Rated DC Working Voltage, TC Characteriatic, and Manufacturing Date Code.

** Available in more stringent tolerances for HT53, 54 & 55 wire leaded capacitors (see spec. sheet for details).

PART NUMBERING SYSTEM: HT55 TYPE HH57 HH58 HT50 HT53 HT54 HT55 HT57 HT58 HT59

VOLTAGE RATING CODE VALUE T V X Y Z 4

5 KVDC 7.5 KVDC 10 KVDC 15 KVDC 20 KVDC 25 KVDC

T

309

CAPACITANCE CODE VALUE 309 300 301 302

3pF 30pF 300pF 3000pF

K

B

CAPACITANCE TOLERANCE CODE VALUE C D F G J K M Z

+/- 0.25pF +/- 0.5pF +/- 1pF +/- 2.5% +/- 5% +/- 10% +/- 20% +/- 80,-20%

-60* DETAIL CODE

TEMPERATURE/CAPACITANCE

‘A’ designates threaded COEFFICIENT (OPTIONAL) type termination FOR HT53, 54, & 55 WIRES ‘B’ designates wire type SIGN/CODE VALUE termination +or- 10 +or- 10ppm/0C All others designate +or- 20 +or- 20ppm/0C a customization +or- 20 +or- 30ppm/0C +or- 20 +or- 60ppm/0C

*+/-60ppm/C is the default value if the optional TC value is not given. If no sign is given +/- is default.

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation RF TRANSMITTING CAPACITORS

HT59 SERIES 3.00 MAX

2.00 0.500

10-32 UNF-2B THREAD, 1/4 DEEP, BOTH ENDS

SELECTED* HT59 TYPE CAPACITOR, 25KVDC

*A continuous range of values is available between the values listed. Call manufacturer for all other part numbers and ordering information. BODY CAP PART NO. TC NPO

(pF) 50 75 100 130 N750 150 200 250 N3300 300 500 700 N5250 800 1000 1500

HT594500MA HT594750MA HT594101MA HT594131MA HT594151MA HT594201MA HT594251MA HT594301MA HT594501MA HT594701MA HT594801MA HT594102MA HT594152MA

MAX CURRENT RATING(A)

MAX KVAr RATING

1 MHz 10MHz 30MHz 3.2 14.1 16.8 3.7 15.8 17.9 3.9 17.4 20.2 4.1 18.0 24.1 4.1 18.1 25.6 5.3 18.2 30.0 6.5 18.3 35.5 5.3 13.0 23.0 6.3 13.6 23.0 7.0 14.1 24.5 7.1 13.2 23.0 7.4 15.1 25.0 8.0 18.0 28.1

1 MHz 10MHz 30MHz 50 50 29.9 50 50 22.6 50 50 21.6 50 50 23.7 50 50 23.2 50 50 23.9 50 50 26.7 50 25.9 8.6 50 16.8 5.6 50 13.6 4.5 50 10.5 3.5 50 9.9 3.3 50 8.4 2.8

NOTES: 1. Capacitor data is based on actual tests of current necessary to obtain a 300C rise. In operation, capacitors may be driven to a 500C rise over 250C ambient and still have a 100C service factor. 2. Capacitance tolerance is +/- 20% with letter ‘M’ as second from last in P/N. For +/-10% use ‘K’.

TYPICAL X5T TC CURVE

TEMPERATURE (0C)

CAPACITANCE CHANGE (%)

CAPACITANCE CHANGE (%)

AVAILABLE IN 15 KVDC AND 20 KVDC

TYPICAL X5V TC CURVE

TEMPERATURE (0C)

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation RF TRANSMITTING CAPACITORS

HT57 SERIES

SELECTED* HT57 AND HH57 VALUES 15KVDC * A continuous range of capacitance is available between the listed values. Call manufacturer for all other part numbers and ordering information. HT57 SERIES BODY TC NPO

CAP (pF) 10 25 50 60 N750 75 100 150 200 N3300 250 300 400 N5250

PART NO. HT57Y100MA HT57Y250MA HT57Y500MA HT57Y600MA HT57Y750MA HT57Y101MA HT57Y151MA HT57Y201MA HT57Y251MA HT57Y301MA HT57Y401MA

500 HT57Y501MA

MAX CURRENT RATING(A) MAX KVAr RATING 1 MHz 10MHz 30MHz 1 MHz 10MHz 30MHz 0.66 10.10 11.30 7.08 35 35 1.66 11.50 12.50 17.69 35 9.94 3.33 12.50 13.00 35 35 5.37 3.80 12.50 13.00 35 35 4.48 3.80 11.10 13.10 35 35 3.64 3.80 11.10 13.70 35 19.59 2.98 4.60 11.90 14.50 35 15.01 2.23 5.10 12.50 15.00 35 12.42 1.79 2.60 6.20 7.00 35 2.44 0.31 3.10 6.20 7.00 35 2.04 0.26 3.70 6.50 7.50 35 1.68 0.22 2.60

5.80

6.90

35

1.07

0.15

NOTES: 1. Capacitor data is based on actual tests of current necessary to obtain a 30 0C rise. In operation, capacitors may be driven to a 50 0C rise over 25 0C ambient and still have a 10 0C service f a c t o r. 2. Capacitance tolerance is +/- 20% with letter ‘M’ as second from last in P/N. For +/-10% use ‘K’, for +/-5% use’J’, for +/-2.5% use’G’

HH57 SERIES BODY TC X5T X5V

CAP (pF) 750 1000 1200 1500

PART NO.

MAX CURRENT RATING(A) MAX KVAr RATING 1 MHz 10MHz 30MHz 1 MHz 10MHz 30MHz HH57Y751MA 2.60 5.80 6.90 35 0.71 0.10 HH57Y102MA 2.10 3.80 5.10 35 0.23 0.04 HH57Y122MA 2.10 3.80 5.10 35 0.19 0.03 HH57Y152MA 2.40 4.10 5.30 35 0.18 0.03 AVAILABLE IN 7.5 KVDC AND 10 KVDC

1.890 MAX

1.187

1/2 D

10-32 UNF-2B THREAD, 1/4 DEEP, BOTH ENDS

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation RF TRANSMITTING CAPACITORS

HT50,58 & HH58 SERIES .890 MAX

1/4-20 HEX STOCK .820 MAX 6-32 UNC-2B THREAD, 5/32 MIN DEPTH, BOTH ENDS

SELECTED* HT50,HT58, AND HH58 VALUES 7.5 KVDC

HT50 SERIES BODY TC NPO

N750

N3300 N5250

CAP (pF) 10 15 25 30 35 40 45 50 55 60 65 75 100 150 170 200 300 400 500 600 700

*A continuous range of capacitance is available between the values listed. Call the manufacturer for ordering information. PART NO. HT50V100MA HT50V150MA HT50V250MA HT50V300MA HT50V350MA HT50V450MA HT50V450MA HT50V500MA HT50V550MA HT50V600MA HT50V650MA HT50V750MA HT50V101MA HT50V151MA HT50V171MA HT50V201MA HT50V301MA HT50V401MA HT50V501MA HT50V601MA HT50V701MA

MAX CURRENT RATING (A) 1 MHz 10 MHz 30 MHz 0.83 4.20 7.30 0.83 4.20 7.30 0.83* 4.90 7.90 1.00* 5.00 8.00 1.17* 5.00 8.30 1.33* 5.10 8.30 1.5* 5.10 8.40 1.66* 5.20 8.50 1.83* 5.20 8.60 1.99* 5.30 8.70 2.16* 5.30 8.90 2.5* 6.50 9.70 3.60 6.80 9.70 3.80 7.00 10.20 3.90 7.10 10.40 2.80 5.10 6.90 2.90 5.30 7.40 3.00 5.40 7.70 3.20 6.00 7.30 3.30 6.20 7.50 3.50 6.40 7.90

MAX KVAr RATING 1 MHz 10 MHz 30 MHz 1.77 10 10 2.65 10 10 4.42 10 10 5.31 10 10 6.19 10 10 7.08 10 10 7.96 10 8.31 8.84 10 7.66 9.73 10 7.13 10 10 6.69 10 10 6.46 10 10 6.65 10 10 4.99 10 10 3.68 10 10 3.37 10 3.78 1.26 10 2.90 0.97 10 2.36 0.79 10 1.69 0.56 10 1.49 0.50 10 1.42 0.47

MAX CURRENT RATING (A) 1 MHz 10 MHz 30 MHz 1.33* 5.30 8.90 1.66* 5.40 9.40 1.99* 5.40 9.70 2.16* 5.50 9.70

MAX KVAr RATING 1 MHz 10 MHz 30 MHz 7.08 10 10 8.84 10 9.37 10 10 8.31 10 10 7.67

HT58 SERIES N750

CAP (pF) 40 50 60 65

PART NO. HT58V400MA HT58V500MA HT58V600MA HT58V650MA

HH58 SERIES X5T X5V

CAP (pF) 500 700 900 1000 2000 2500

PART NO.

MAX CURRENT RATING (A) MAX KVAr RATING 1 MHz 10 MHz 30 MHz 1 MHz 10 MHz 30 MHz HH58V501MA 1.40 3.40 4.90 0.60 0.60 0.25 HH58V701MA 1.50 3.50 5.10 0.60 0.59 0.20 HH58V901MA 1.60 3.70 5.30 0.60 0.50 0.17 HH58V102MA 1.60 3.80 5.60 0.60 0.50 0.17 HH58V202MA 1.70 4.20 6.30 0.60 0.32 0.11 HH58V252MA 1.80 4.40 6.60 0.60 0.28 0.09 *Data is based on not exceeding the maximum rated voltage. All other data is based on a 300C rise above 250C ambient in still air.

NOTES: 1. Capacitors are available in 5 KVDC. 2. Capacitance tolerance is +/-20% with letter ‘M’ as second from last in P/N. For +/-10% tolerance use ‘K’, for +/-5% tolerance use ‘J’, for +/-2.5% tolerance use ‘G’.

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation RF TRANSMITTING CAPACITORS

HT53,54 &55 SERIES

TYPE ‘B’ 1.5”

TYPE ’A’ 1.5”

L

2-56 UNC-2B THD, 1/8” MIN. THD DEPTH BOTH ENDS

L

D

D

18 GA TCW (.04 DIA) TYPE

L

D

NPO

N750

HT53 7/16” 1/2” 7-25pF 30-45pF 3/8” 1-14pF 15-40pF HT54 3/8” HT55 11/32” 9/32” 1-7 pF 8-15pF

KVAr

7KVA 5KVA 3KVA

TYPE

L

D

NPO

N750

HT53 31/64 9/16” 7-25pF 30-45pF HT54 27/64 7/16” 1-14pF 15-40pF HT55 25/64 5/16” 1-7pF 8-15pF

KVAr 7KVA 5KVA 3KVA

NPO designations are now available in +/-10ppm/0C, +/-20ppm/0C, +/-30ppm/0C, and +/-60ppm/0C. CALL FOR DETAILS.

SELECTED* HT53, 54, AND 55 VALUES AT 5 KVDC

*A continuous range of values is available between the values listed. Call for all other part numbers and ordering information. HT53 SERIES BODY TC NPO

N750

CAP (Pf) 7 10 20 25 30 35 40 45

PART NO. HT53T709DB HT53T100KB HT53T200KB HT53T250KB HT53T300KB HT53T350KB HT53T400KB HT53T450KB

MAXIMUM CURRENT RATING (A) 1MHz 10MHz 30MHz 0.16* 0.54* 3.80 0.22* 2.20* 4.00 0.44* 2.90 4.50 0.55* 3.00 4.80 0.66* 3.10 5.00 0.77* 3.60 5.10 0.89* 3.70 5.20 1.00* 3.80 5.30

MAXIMUM KVAr RATING 1MHz 10MHz 30MHz 0.55 5.50 7.00 0.79 7.00 7.00 1.57 7.00 5.37 1.97 7.00 4.88 2.36 7.00 4.42 2.75 7.00 3.94 3.14 7.00 3.58 3.54 7.00 3.31

CAP (Pf) 3 5 10 12 14 15 20 25 30 35 40

PART NO. HT54T309DB HT54T509DB HT54T100KB HT54T120KB HT54T140KB HT54T150KB HT54T200KB HT54T250KB HT54T300KB HT54T350KB HT54T400KB

MAXIMUM CURRENT RATING (A) 1MHz 10MHz 30MHz 0.07* 0.66* 2.00* 0.11* 1.10* 2.20 2.20* 2.80 6.36 0.26* 2.50 2.90 0.31* 2.70 3.20 0.33* 2.90 4.10 0.44* 3.60 5.30 0.55* 3.70 5.40 0.66* 3.70 5.50 0.77* 3.80 5.60 0.89* 3.80 5.60

MAXIMUM KVAr RATING 1MHz 10MHz 30MHz 0.24 2.36 5.00 0.39 3.93 5.00 0.79 5.00 4.16 0.94 5.00 3.71 1.10 5.00 3.88 1.18 5.00 5.00 1.57 5.00 5.00 1.97 5.00 5.00 2.36 5.00 5.00 2.75 5.00 4.75 3.14 5.00 4.16

CAP (Pf) 1 2 3 5 7 8 10 12 15

PART NO. HT55T109DB HT55T209DB HT55T309DB HT55T509DB HT55T709DB HT55T809DB HT55T100KB HT55T120KB HT55T150KB

MAXIMUM CURRENT RATING (A) 1MHz 10MHz 30MHz 0.02* 0.22* 1.20 0.04* 0.44* 1.30 0.07* 0.66* 1.40 0.11* 0.90 1.70 0.16* 0.95 2.20 0.18* 0.96 2.40 0.22* 0.98 2.90 0.27* 1.00 3.00 0.33* 1.10 3.00

MAXIMUM KVAr RATING 1MHz 10MHz 30MHz 0.08 0.79 2.36 0.16 1.57 3.00 0.24 2.36 3.00 0.39 3.00 3.00 0.55 3.00 3.00 0.63 3.00 3.00 0.79 3.00 3.00 1.02 3.00 3.00 1.18 3.00 3.00

HT54 SERIES BODY TC NPO

N750

HT55 SERIES BODY TC NPO

N750

* Data is basedon not exceeding the maximum rated voltage. All other data is based on a 300C rise above 250C ambient conditions. NOTES: 1. Final Suffix ‘B’ denotes a wire type terminal. For cap termination change suffix to ‘A’. 2. The letter ‘D’ (second from last in P/N) designates a capacitance tolerance of +/-0.5pF, or letter ‘K’ designates +/- 10%. For tighter tolerances, change ‘D’ to ‘C’ for +/- 0.25pF, or ‘K’ to ‘J’ for +/- 5%.

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation RF TRANSMITTING CAPACITORS

SPHH &SPHT SERIES B

A

MAX.

TERMINAL TYPE I

BODY

CAP

PART

VOLTAGE MAX RF MAX.

TERMINAL

A

TC

(pF)

NUMBER

(KVDC)

AMPS

KVAr

THREAD

MAX.

MAX.

B

TERM.

X5T

1000

SPHHR102TK

2.5

10

0.25

10-32

0.875

0.75

TYPE I

X5T

6800

SPHHR682TN

3.5

30

1

10-32

1.915

0.875

I

X5V

1500

SPHHR152TA

3.5

10

0.25

10-32

1

0.875

I

MAX. BODY

CAP

PART

TERMINAL

A

B

TERM

TC

(pF)

NUMBER

VOLTAGE MAX RF MAX. (KVDC)

AMPS

KVAr

THREAD

MAX.

MAX.

TYPE

X5T

1000

SPHHR102TK

2.5

10

0.25

10-32

0.875

0.75

X5T

6800

SPHHR682TN

3.5

30

1

10-32

1.915

0.875

X5V

1500

SPHHR152TA

3.5

10

0.25

10-32

1

0.875

X5V

3300

SPHHR332TK

2.5

20

0.5

10-32

1.281

0.719

I

X5V

10,000

SPHHR103TA

3.5

10

0.25

10-32

2.35

1

I

BODY

CAP

PART

TC

(pF)

NUMBER

(KVDC)

AMPS

I I SPEC.

MAX.

TERMINAL TYPE II

TERMINAL

A

KVAr

THREAD

MAX.

B MAX.

TERM TYPE

N470

200

SPHTT201JD

5

15

10

1/4 - 20

1.875

0.688

I

N3300

500

SPHTT501KB

5

10

7.5

10-32

1.343

0.828

I

NPO

33

SPHTV330KA

7.5

10

6

6-32

1.85

0.78

I

39

SPHTV390KA

7.5

10

6

6-32

1.85

0.78

I

47

SPHTV470KA

7.5

10

6

6-32

1.85

0.78

I

N470 N800

TERMINAL TYPE III

VOLTAGE MAX RF MAX.

56

SPHTV560KA

7.5

10

6

6-32

1.85

0.78

2000

SPHT1202MC

10

150

60

8-32

5.188

1.44

I SPEC.

900

SPHT1901KA

12

60

90

10-32

5.665

2.152

1000

SPHT2102MB

15

40

70

10-32

4.75

2.00

II

N2200

1000

SPHT5102MA

30

30

70

1/4 - 20

4.3

3.35

III

N3300

1000

SPHT7102MA

40

30

70

4.5

4.625

8-32

II

SPEC.

The above represents a very small portion of our product capabilities. Many variations of terminal configuration, capacitance, and size are possible.

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation HIGH VOLTAGE CERAMIC CAPACITORS FOR DC APPLICATIONS

EPSL SERIES EPSL STANDARD RATINGS

HIGH ENERGY CORPORATION’S LINE OF EPOXY ENCAPSULATED CERAMIC CAPACITORS ARE DESIGNED FOR USE IN HIGH VOLTAGE DC POWER SUPPLIES, ELECTROSTATIC COPYING MACHINES, LIGHTING ARRESTOR SYSTEMS, LASER APPLICATIONS AND INSECT ELECTROCUTION DEVICES.

SPECIFICATIONS: Temperature Range:

Operating –550C To + 850C Storage –550C To +1250C

Capacitance Tolerance:

Listed As +80%/-20%.

Dissipation Factor:

1.5% Maximum, When Measured At 250C At A Frequency Of 1 KHz.

Dielectric Strength Test:

All Capacitors Will Withstand A DC Potential Of 1.5 Times Rated Working Voltage For 10 Seconds At A Temperature Of 250C.

Insulation Resistance:

20,000 Megohms Minimum.

Temperature OverThe Temperature Range Of –550C Characteristics: To +850C, The Temperature Shall Not Vary More Than -56% From The 250C Measured X5U. Terminal Strength:

Maximum Torque To Be Applied To Standard Terminal Leads Shall Be 12 Inch Pounds; For High Strength Terminal, Maximum Torque Shall Be 25 Inch Pounds.

THIS TERMINAL MAY EXTEND UP TO 0.1`0” ABOVE THE INSULATED SURFACE

H +/-0.05”

D +/-0.03”

CAP (pF) 1100 2000 3400 5400 8000 11000 14000 16000 680 1200 2000 3200 4700 6500 8300 9300 470 800 1300 2200 3200 4600 5800 6500 350 500 600 1000 1600 2400 3300 4800 260 460 780 1200 1800 2500 3300 3600 180 340 570 920 1300 1900 2400 2700

RATED VOLTAGE 6 KVDC 6 KVDC 6 KVDC 6 KVDC 6 KVDC 6 KVDC 6 KVDC 6 KVDC 10 KVDC 10 KVDC 10 KVDC 10 KVDC 10 KVDC 10 KVDC 10 KVDC 10 KVDC 15 KVDC 15 KVDC 15 KVDC 15 KVDC 15 KVDC 15 KVDC 15 KVDC 15 KVDC 20 KVDC 20 KVDC 20 KVDC 20 KVDC 20 KVDC 20 KVDC 20 KVDC 20 KVDC 30 KVDC 30 KVDC 30 KVDC 30 KVDC 30 KVDC 30 KVDC 30 KVDC 30 KVDC 40 KVDC 40 KVDC 40 KVDC 40 KVDC 40 KVDC 40 KVDC 40 KVDC 40 KVDC

PART NO. EPSLU112ZS EPSLU202ZS EPSLU342ZS EPSLU542ZS *EPSLU802ZS *EPSLU113ZS *EPSLU143ZS *EPSLU163ZS EPSL1681ZS EPSL1122ZS EPSL1122ZS EPSL1322ZS *EPSL1472ZS *EPSL1652ZS *EPSL1832ZS *EPSL1932ZS EPSL2471ZS EPSL2801ZS EPSL2132ZS EPSL2222ZS *EPSL2322ZS *EPSL2462ZS *EPSL2582ZS *EPSL2652ZS EPSL3351ZS EPSL3501ZS EPSL3601ZS EPSL3102ZS EPSL3162ZS *EPSL3242ZS *EPSL3332ZS *EPSL3482ZS EPSL5261ZS EPSL5461ZS EPSL5781ZS EPSL5122ZS *EPSL5182ZS *EPSL5252ZS *EPSL5332ZS *EPSL5362ZS EPSL7181ZS EPSL7341ZS EPSL7571ZS EPSL7921ZS *EPSL7132ZS *EPSL7192ZS *EPSL7242ZS *EPSL7272ZS

DIMENSIONS (INCHES) +/- .030" D +/- .050" H 0.83 0.69 1.00 0.69 1.25 0.69 1.50 0.69 1.75 0.69 2.08 0.69 2.25 0.69 2.37 0.69 0.83 0.81 1.00 0.81 1.25 0.81 1.50 0.81 1.75 0.81 2.08 0.81 2.25 0.81 2.37 0.81 0.83 0.95 1.00 0.95 1.25 0.95 1.50 0.95 1.75 0.95 2.08 0.95 2.25 0.95 2.37 0.95 0.83 1.13 1.00 1.13 1.25 1.13 1.50 1.13 1.75 1.13 2.08 1.13 2.25 1.13 2.37 1.13 0.83 1.31 1.00 1.31 1.25 1.31 1.50 1.31 1.75 1.31 2.08 1.31 2.25 1.31 2.37 1.31 0.83 1.61 1.00 1.61 1.25 1.61 1.50 1.61 1.75 1.61 2.08 1.61 2.25 1.61 2.37 1.61

* Items available with high strength terminals. To order high strength terminals, change last suffix letter of part number from ‘S’ to ‘H’.

8-32 NC-2B THREADED HOLE (THROUGH)

0.312”

STANDARD TERMINAL

10-32 NF-2B

0.500”

HIGH STRENGTH TERMINAL

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation HIGH VOLTAGE CERAMIC FEED THRU CAPACITORS

SPFT SERIES .625”

1.496”

* INNER TERMINAL

* INNER TERMINAL

CERAMIC LENGTH

OUTER TERMINAL TYPE I High Energy’s line of voltage feed thru capacitors are designed for use in RF heating equipment, power transmitters and high voltage filters. SELECTED VALUES (OTHERS AVAILABLE) (8) HOLES .203” DIA. ON A 3.125” DIA B.C.

3.656”

TYPE II

(5) HOLES .204” DIA. ON A 2.500” DIA B.C.

3.000”

TYPE III

PART

MAX.

MAX.

VOLT.

CERAMIC TERMINAL

OUTER

NUMBER

CAP(pF)

BODY

(KV)

LENGTH

SPFTW122KA

1200+/-5%

N330

8.5

4.565"

TYPE II

SPFTW202JK

2000+/-5%


8.5

5.156"

II

SPFT1151ME

150+/-20%

NPO

10

3.465"

V

SPFT1331MD

330+/-20%

NPO

10

3.465"

I

SPFT1431ME

430+/-20%

NPO

10

3.465"

V

SPFT1501MD

500+/-20%

NPO

10

3.465"

I

SPFT112AMD

1250+/-20% N800

10

3.465"

I

SPFT1202ME

2000+/-20% N2200

10

3.465"

V

SPFT1102MC

1000+/-20% N5250

10

3.465"

IV

SPFT1202MH

2000+/-20% N5250

10

3.860"

IV

SPFT1103PA

10,000

N5250

10

5.220"

II

SPFT2402MB

4000+/-20% N2200

12

6.105"

SPFT2152PC

1500 GMV

N3300

15

4.200"

SPFT2202MF

2000+/-20% N5250

15

3.860"

SPFT3202MA

2000+/-20% N3300

20

4.875"

+80%,-20% NOT SHOWN III IV MODIFIED VI

SPFT4501MA

500+/-20%

N3300

25

5.625"

VI

SPFT4202MA

2000+/-20% N3300

25

5.625"

VI

SPFT7202MA

2000+/-20% N3300

40

7.500"

VI

Note: * Please note that each outer terminal type can have a number of inner terminal configurations associated with it. Call the factory for mounting instructions.

(4) HOLES .173” DIA ON A 2.00” DIA B.C.

2.500”

TYPE IV

(4) SLOTS .150”x .300” ON A 2.323” DIA B.C.

(6) HOLES .203” DIA ON A 4.250” DIA B.C.

2.835”

4.250”

TYPE V

TYPE VI

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]

High Energy Corporation CUSTOMIZED CERAMIC CAPACITORS

CAN’T FIND WHAT YOU’RE LOOKING FOR? Call us! We have the unique ability to manufacture custom shapes and configurations on all of our ceramic materials, as well as a variety of terminal configurations. We would be happy to let our engineers work directly with yours to come up with a creative solution to your high voltage ceramic capacitor problems.

High Energy Corp. Lower Valley Road / PO Box 308 Parkesburg, PA 19365 Tel - (610) 593-2800 FAX - (610) 593-2985 e-mail - [email protected]