Fingerprint Based Bank Locker System

  • April 2020
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Fingerprint Based Bank Locker System as PDF for free.

More details

  • Words: 416
  • Pages: 26
FINGER PRINT BANK LOCKER SYSTEM Guided By: Mr. R. Ram Prasad. Asst.Professor

Presented By: D. Bala krishna V. Murali B. Narendra 479) N. Thrinath

(04C51A0422) (05C51A0477) (05C51A0

1

(05C51A0487)

OVERVIEW OF EXISTING SYSTEM 

Locks & Keys



By this we can’t say that we are going to provide good security to our lockers.

2

DRAW BACKS OF PRESENT SYSTEM 

Security is less



Others can steal the user’s entry key

3

Objective Of The Project

4

BLOCK DIAGRAM Power supply

Finger Print Module

POWER SUPPLY TO ALL SECTIONS

16 X 2 LCD 8 9

Reset

ULN DRIVER

S 5 2

Driver Circuit

Stepper Motor

Buzzer

5

Enter ur fingerprint

verifiein g fingerpri nt

no

yes You are unauthorized person

Enter into the locker room

Enter password

Checking Password

no

yes Locker is opened by stepper motor Press Switch to close the locker

6

Power supply 

Transformer



Bridge Rectifier



Regulator

7

MICROCONTROLLER 89S52 microcontroller. 

RAM 256Bytes.



8Kb of flash memory.



The functionality of 89S52 is same as 8051 microcontroller. 8

FINGER PRINT MODULE 

In this we choose “verification” process.



It can operate in 2 modes they are Master mode and User mode.

9

MASTER MODE 

In this mode,we can register our finger image in present of manager.

10

USER MODE 

Compare of input finger print and identified finger print

11

LCD 

We are using 16x2 lcd display



LCD has14 pin

12

13

PASSWORD PROTECTION 

Unique id (password) which is given to user to open his locker with the help of a keypad



Any port was used to handle our alpha-numeric keypad.

14

15

STEPPER MOTOR



Automatically,

locker

will

open

by

stepper

motor(step angle). 

After the work by using reset pin user will secure their locker.

16

17

Buzzer 

It is a signaling device.



It beeps when user mismatch.

18

19

ADVANTAGES  Most  No

secure

manual errors

 Need

not carry any

card  Others

steel

cannot the

entry key

user’s 20

APPLICATIONS 

Voter Identification and electoral enrollment



Industries



Banks and ATM



Personal Computer

21

SCOPE FOR ADVANCEMENTS



GSM modem can be connected to this unit to communicate to security department, in case of unauthorized entry trials.

22

CONCLUSION



This project is used for 100 members, we can also extend the capability for further requirements.

REFERENCE Text Books: Basics of Biometrics -- David Louis Website: www.wikipedia.com  Magazines: Electronics for you

Related Documents

Locker
November 2019 23
Fingerprint
November 2019 25
Fingerprint
October 2019 17