Electronic Control Box Chart Recorder

  • Uploaded by: Comstar Supply
  • 0
  • 0
  • June 2020
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Electronic Control Box Chart Recorder as PDF for free.

More details

  • Words: 719
  • Pages: 2
Comstar Supply,

5 Blue Heron Drive Collegeville, PA 19426 Phone: 610-831-5020 Fax: 610-831-5012

INC

Think Cable... Think Comstar

1-866-326-6782

www.comstarsupply.com

Limited Warranty

INSTALLATION INSTRUCTIONS

Condux International, Inc. extends the following warranty to the original purchaser of these goods for use, subject to the qualifications indicated:

Electronic Control Box

Condux International, Incorporated warrants to the original purchaser for use that the goods or any component thereof manufactured by Condux International will be free from defects in workmanship for the period of one year from the date of purchase, provided such goods are installed, maintained, and used in accordance with Condux’s written instructions.

INSTALLATION INSTRUCTIONS

Chart Recorder

Components not manufactured by Condux International but used within the assembly provided by Condux International are subject to the warranty period as specified by the individual manufacturer of said component, provided such goods are installed, maintained, and used in accordance with Condux’s and the original manufacturer’s written instructions. Condux’s sole liability and the purchaser’s sole remedy for a failure of goods under this limited warranty, and for any and all claims arising out of the purchase and use of the goods, shall be limited to the repair and replacement of the goods that do not conform to this warranty. To obtain repair or replacement service under the limited warranty, the purchaser must contact the factory for a Return Material Authorization (RMA). Once obtained, send the RMA along with the defective part or goods, transportation prepaid, to: Condux International, Inc. 145 Kingswood Road Mankato, MN 56001 USA THERE ARE NO EXPRESS WARRANTIES COVERING THESE GOODS OTHER THAN AS SET FORTH ABOVE. THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. CONDUX ASSUMES NO LIABILITY IN CONNECTION WITH THE INSTALLATION OR USE OF THIS PRODUCT, EXCEPT AS STATED IN THIS LIMITED WARRANTY. CONDUX WILL IN NO EVENT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

®

CONDUX Condux International, Inc. • P.O. Box 247 • 145 Kingswood Road • Mankato, MN 56001 USA 1-507-387-6576 • 1-800-533-2077 • FAX 1-507-387-1442 Internet: http://www.condux.com © Copyright 1998, Condux International, Inc Printed in USA Literature Part Number: 08690099 Revision Number: 1.10

5 Blue Heron Drive

Collegeville, PA 19426

®

CONDUX (610) 831-5020

www.comstarsupply.com

Fax: (610) 831-5012

Comstar Supply,

5 Blue Heron Drive Collegeville, PA 19426 Phone: 610-831-5020 Fax: 610-831-5012

INC

Think Cable... Think Comstar

1-866-326-6782

www.comstarsupply.com

Installation Procedure !DANGER: The chart recorder is an electrical device. Electric shock hazards exist that could result in severe personal injury or death. Observe the following precautions: • Do not expose electronic control box or chart recorder to water.

8. Reattach ECB panel to case. Attach Chart Recorder to case. 9. Reconnect power supply and test electronic control box for proper operation.

• Do not disassemble chart recorder (no user-serviceable parts inside). Refer servicing to qualified personnel. • The electronic control box power switch should be in the OFF position before connecting or disconnecting any cords. • The electronic control box must be disconnected from all power supplies before chart recorder is installed.

Figure 1. Power Inverter

1. Disconnect all power supplies. 2. Remove blank cover plate (right side). Remove Electronic Control Box (ECB) panel assembly (left side). Retain screws. 3. Attach Power Inverter to inside of case using inverter bracket (Figure 1). Bracket and nuts are found in the Accessory Kit. 4. Remove blank plug from side of ECB panel assembly. 5. Connect chart recorder electrical plug to socket where the blank plug was located (Figure 2). 6. Plug the two-prong male/female electrical cords together. 7. Plug Chart Recorder power cord plug into inverter (Figure 1).

Figure 2. ECB Panel Plug

!WARNING: Read and understand all procedure and safety instructions before using the Condux® Electronic Control Box Chart Recorder. Failure to do so may result in personal injury or property damage. Save this user’s guide for future reference.

!DANGER: The chart recorder is an electrical device. Electric shock hazards exist that could result in severe personal injury or death.

ADVERTENCIA !ADVERTENCIA: Favor de leer y comprender

Instrucciones de Operación

todas las instrucciones de operación y seguridad antes de usar el Condux® Electronic Control Box Chart Recorder. Si Ud. no comprende las instrucciones favor de consultarle a su jefe.

5 Blue Heron Drive

Collegeville, PA 19426

(610) 831-5020

www.comstarsupply.com

Fax: (610) 831-5012

Related Documents


More Documents from "Ramanujam O S"