Ecc Installations Prerequisites.txt

1) General networking considerations apply (static network Addresses, no adapter teaming, resolve names via DNS, etc.) 2) Recommended to install all infrastructure components on The same LAN segment�all must have connectivity to all 3) All agents must have connectivity to Control Center Server and all Stores 4) User interfaces must have connectivity to Control Center Server, Web Console, and Repository 5) Verify required network routing 6) Use static network addresses 7) Ensure each host name is resolved by a Domain Name Server (DNS) 8) Host names should not contain underscore or special Characters�letters and numbers are preferred 9) Use fully qualified domain names (FQDN) in installation prompts 10) Ensure network latency between infrastructure components is within limits (less than 8 ms) 11)Adapter teaming is not supported 12) not to install the ipv6. Create local user eccadmin account on Control Center Server host 13)Infrastructure components must not be separated by firewall 14)Console must not be separated from infrastructure by Firewall. 15) Following ports needs to be open if host agent 5799,10799,5798,10444,5801,10555,10801. 16) Please share the EMC reports for the all the ECC infra server. 17) Solution Enabler installation. 18) Complete the zoning for ECC infra servers with Wipro storage boxes. 19) Assign the 6 gatekeepers per HBA per storage. 20) for OS installation and partition details please follow the existing ECC infra servers. 21) After installing the OS please remove one of the internal mirror disk( for backup purpose).