Easy Vpn Configuration Example

Easy VPN Configuration Example This document provides a Easy VPN (EzVPN) sample configuration, using Cisco 1800 series, Cisco 2800 series, and Cisco 3800 series routers. Introduction This document provides a sample Easy VPN (or EzVPN) configuration with the following characteristics: • All traffic between two client branch sites and headquarters passes through a Virtual Private Network (VPN) of IP Security (IPSec) encrypted tunnels. • Techniques used include Internet Key Exchange (IKE) dead peer detection (DPD), split tunneling, and group policy on the server with Domain Name Server (DNS) information, Windows Information Name Service (WINS) information, domain name, and an IP address pool for clients. • Headquarters uses an EzVPN concentrator, a Cisco 3800 series router, with an ATM interface. • One branch uses a Cisco 2800 series router and employs a network-mode EzVPN client with a serial interface, while another branch uses a Cisco 1800 series router and uses client mode EzVPN with an SHDSL interface. • The various show commands demonstrate configurations for the Internet Security Association Key Management Protocol (ISAKMP) and IPSec Security Associations (SAs) on the EzVPN concentrator, as well as IPSec client EzVPN status on the clients. Easy VPN Configuration Example List of Terms ATM—Asynchronous Transfer Mode. A connection switching protocol that organizes data into 53-byte cell units, transmitting them via digital signals. Each cell is processed asynchronously (hence the name) relative to the transmission or arrival of other cells within a single message. Cells are also queued before being transmitted in a multiplexing fashion. ATM can be used for many different services, including voice, video, or data. DNS—Domain Name Server. Maps names to Internet Protocol (IP) addresses and addresses to names. Domain Name Servers maintain lists of domain name and IP address mappings. DPD—Dead peer detection. An implementation of a client keepalive functionality, to check the availability of the VPN device on the other end of an IPSec tunnel.

IKE—Internet Key Exchange. IKE establishes a shared security policy and authenticates keys for services (such as IPSec) that require keys. Before any IPSec traffic can be passed, each router/firewall/host must verify the identity of its peer. This can be done by manually entering preshared keys into both hosts or can be done by a certification authority (CA) service. IPSec—IP Security. A framework of open standards that provides data confidentiality, data integrity, and data authentication between participating peers. IPSec provides these security services at the IP layer. IPSec uses IKE to handle the negotiation of protocols and algorithms based on local policy and to generate the encryption and authentication keys to be used by IPSec. IPSec can protect one or more data flows between a pair of hosts, between a pair of security gateways, or between a security gateway and a host. ISAKMP—Internet Security Association Key Management Protocol. A protocol for key exchange encryption and authentication. ISAKMP requires at least one pair of messages to be exchanged between two VPN-connected peers before a secure link can be established. NETBEUI—NetBIOS extended user interface. A transport protocol associated with Microsoft-based networks. Unlike TCP/IP, NETBEUI is not a routable network protocol. NetBIOS—Network Basic Input/Output System. A peer-to-peer low-level networking protocol dating back to the 1980s, NetBIOS links network operating systems with network hardware. NetBIOS is not routable and must be encapsulated with TCP/IP to pass through routers. SA—Security association. This is a unidirectional channel negotiated by IPSec, with a pair of SAs required for two-way communication. SAs are used to index session keys and initialization vectors. SHDSL—Symmetrical High-Speed Digital Subscriber Line. An implementation of DSL that operates at equal speeds in both transmission directions, at rates from 192 kbps to 2.3 Mbps. WINS—Windows Internet Naming Service. A service in Microsoft-based networks that translates hostnames into IP addresses. Using NETBEUI protocol, it is also compatible with NetBIOS. Before You Begin The following are the requirements for using this configuration example. Conventions

For more information on document conventions, see the Cisco Technical Tips Conventions. Easy VPN Configuration Example Configure3 OL-6340-01 Components Used The information in this document is based on these software and hardware versions: • At Headquarters, a Cisco 3845 router with a Cisco CallManager cluster, and with ATM access to the Internet • At Branch 1, a Cisco 1841 router with a WIC-1SHDSL interface card installed, and with DSL access to the Internet • At Branch 2, a Cisco 2811 router with a serial interface connection to the Internet • For Cisco 1800 series routers and Cisco 2800 series routers: Cisco IOS Release 12.3(8)T4 • For Cisco 3800 series routers: Cisco IOS Release 12.3(11)T • Advanced Enterprise Services feature set The information presented in this document resulted from the use of devices in a specific lab setup and environment. All the devices used in this document started with a cleared (default) configuration. If you are working in a live network, ensure that you understand the potential impact of any command before you use it. Related Products This configuration can also be used with the following hardware: • Cisco 1800 series routers • Cisco 2800 series routers • Cisco 3800 series routers Configure This section presents the information for configuring the features described in this document. Note For additional information on the commands used in this document, use the Cisco IOS Command Lookup tool. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear. Configuration Tips • Make sure that the tunnels work before you apply the crypto maps.

• Apply IPSec crypto maps to both the tunnel interface and the physical interface Easy VPN Configuration Example Configure OL-6340-01 Network Diagram This document uses the network setup shown in the following illustration: Following are the callout terms and definitions for the diagram, identified by number: The Headquarters location (callout 1) uses a Cisco 3845 router with these characteristics: • EzVPN server • ATM access to the Internet • Operating in a Cisco CallManager cluster • Public IP address: 10.32.152.26 • Private IP address pool: 192.168.1.0/24 The Branch 1 location (callout 8) uses a Cisco 1841 router with these characteristics: • EzVPN client using client mode • DSL access to the Internet • WIC-1SHDSL interface card installed • Public IP address: 10.32.152.46 • Private IP address pool: 192.168.3.0/24 117861 12 3 4 5 7 8 9 6 1. Headquarters location 6. DSL link from the Branch 1 router to the Internet 2. ATM link from the Headquarters router to the Internet 7. Serial link from the Branch 2 router to the

Internet 3. VPN tunnel through the Internet to Branch 1 8. Branch 1 location 4. VPN tunnel through the Internet to Branch 2 9. Branch 2 location 5. The Internet, represented by the cloud Easy VPN Configuration Example Configure 5 OL-6340-01 The Branch 2 location (callout 9) uses a Cisco 2811 router with these characteristics: • EzVPN client using network mode • Serial access to the Internet • Public IP address: 10.32.150.46 • Private IP address pool: 192.168.3.1/24 Configurations This example uses these configurations: • Headquarters Office Configuration (Cisco 3845 Router), page 5 • Branch 1 Router Configuration (Cisco 1841 Router), page 8 • Branch 2 Router Configuration (Cisco 2811 Router), page 10 Headquarters Office Configuration (Cisco 3845 Router) EzVPN-Hub# show running-config Building configuration... Current configuration : 6824 bytes ! version 12.3 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname EzVPN-Hub ! boot-start-marker boot-end-marker ! enable secret 5 $1$t8oN$hXnGodPh8ZM/ka6k/9aO51

! username admin secret 5 $1$cfjP$kKpB7e3pfKXfpK0RIqX/E. username ezvpn-spoke2 secret 5 $1$vrSS$AhSPxEUnPOsSpJkGdzjXg/ username ezvpn-spoke1 secret 5 $1$VK0p$4D0YXNOtC6K7MR4/vinUL. mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 aaa new-model ! ! aaa authentication login USER_AAA local aaa authentication login USERLIST local aaa authorization network GROUP_AAA local aaa session-id common ip subnet-zero ! ip cef no ip domain lookup ip domain name cisco.com ip audit notify log ip audit po max-events 100 Easy VPN Configuration Example Configure OL-6340-01 no ftp-server write-enable voice-card 0 no dspfarm ! !--- IKE configuration ! crypto isakmp policy 10 encr 3des hash md5 authentication pre-share group 2

crypto isakmp keepalive 90 12 ! crypto isakmp client configuration group VPN1 acl SPLIT_T ip access-list extended SPLIT_T permit ip 192.168.0.0 0.0.255.255 any key cisco123 dns 192.168.168.183 192.168.226.120 wins 192.168.179.89 192.168.2.87 domain cisco.com pool VPN-POOL save-password ! !--- IPSec configuration ! crypto ipsec transform-set TRANSFORM-1 esp-3des esp-md5-hmac ! crypto dynamic-map INT_MAP 1 set security-association lifetime kilobytes 530000000 set security-association lifetime seconds 14400 set transform-set TRANSFORM-1 ! ! crypto map INT_MAP client authentication list USER_AAA crypto map INT_MAP isakmp authorization list GROUP_AAA crypto map INT_MAP client configuration address respond crypto map INT_MAP 30000 ipsec-isakmp dynamic INT_MAP ! ! ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto media-type rj45

no negotiation auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto media-type rj45 no negotiation auto ! interface ATM0/0/0 description === public interface === ip address 10.32.152.26 255.255.255.252 ip pim sparse-dense-mode ip ospf network point-to-point no atm ilmi-keepalive pvc 10/100 Easy VPN Configuration Example Configure 7 OL-6340-01 protocol ip 10.32.152.25 broadcast ! crypto map INT_MAP ! interface FastEthernet4/0 no ip address shutdown ! interface FastEthernet4/1 switchport access vlan 10 no ip address ! interface FastEthernet4/2 switchport access vlan 10 no ip address

! interface FastEthernet4/3 switchport access vlan 10 no ip address ! interface FastEthernet4/4 switchport access vlan 10 no ip address ! interface FastEthernet4/5 switchport access vlan 10 no ip address ! interface FastEthernet4/6 switchport access vlan 10 no ip address ! interface FastEthernet4/7 switchport access vlan 10 no ip address ! interface FastEthernet4/8 switchport access vlan 10 no ip address ! interface FastEthernet4/9 switchport access vlan 10 no ip address ! interface FastEthernet4/10 switchport access vlan 10 no ip address ! interface FastEthernet4/11 switchport access vlan 10 no ip address

! interface FastEthernet4/12 switchport access vlan 10 no ip address ! interface FastEthernet4/13 switchport access vlan 10 no ip address ! interface FastEthernet4/14 switchport access vlan 10 no ip address ! Easy VPN Configuration Example Configure OL-6340-01 interface FastEthernet4/15 switchport access vlan 10 no ip address ! !-- Entries for FastEthernet 4/16 through 4/35 omitted for redundancy ! interface GigabitEthernet4/0 no ip address shutdown ! interface GigabitEthernet4/1 no ip address shutdown ! interface Vlan1 no ip address ! interface Vlan10 ip address 192.168.1.1 255.255.255.0 !

! ip local pool VPN-POOL 10.1.1.1 10.1.1.10 ip classless ip route 0.0.0.0 0.0.0.0 10.32.152.25 ! ip http server no ip http secure-server ! ! control-plane ! ! line con 0 line aux 0 line vty 0 4 login authentication USERLIST ! ! end ! Branch 1 Router Configuration (Cisco 1841 Router) EzVPN-Spoke-1# show running-config Building configuration... . . Current configuration : 4252 bytes ! version 12.3 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname EzVPN-Spoke-1 ! boot-start-marker

boot-end-marker ! logging buffered 4096 informational Easy VPN Configuration Example Configure 9 OL-6340-01 enable secret 5 $1$b7.Q$Y2x1UXyRifSStbkH/YyrP. ! username admin password 7 0519030B234D5C0617 memory-size iomem 20 mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 aaa new-model ! ! aaa authentication login USERLIST local aaa session-id common ip subnet-zero ip cef ! ! ip dhcp excluded-address 192.168.2.1 ! ip dhcp pool PRIVATE_DHCP import all network 192.168.2.0 255.255.255.0 default-router 192.168.2.1 ! ! no ip domain lookup ip domain name cisco.com ip sap cache-timeout 30 ip ssh time-out 30

ip ids po max-events 100 no ftp-server write-enable ! !--- IPSec configuration ! crypto ipsec client ezvpn VPN1 connect auto group VPN1 key cisco123 mode client peer 10.32.152.26 username ezvpn-spoke1 password cisco1 ! interface FastEthernet0/0 description === private interface === ip address 192.168.2.1 255.255.255.0 duplex auto speed auto crypto ipsec client ezvpn VPN1 inside ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface ATM0/1/0 no ip address no atm ilmi-keepalive dsl equipment-type CPE dsl operating-mode GSHDSL symmetric annex A dsl linerate AUTO pvc 0/35 encapsulation aal5snap ! pvc 8/35 Easy VPN Configuration Example

Configure 10 OL-6340-01 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 description === public interface === ip address 10.32.152.46 255.255.255.252 ip pim sparse-dense-mode encapsulation ppp dialer pool 1 dialer-group 1 crypto ipsec client ezvpn VPN1 ! ip classless ip route 0.0.0.0 0.0.0.0 10.32.152.45 ! ip http server no ip http secure-server ! control-plane ! line con 0 line aux 0 line vty 0 4 login authentication USERLIST ! ! end Branch 2 Router Configuration (Cisco 2811 Router) EzVPN-Spoke-2# show running-config Building configuration... . Current configuration : 4068 bytes

! version 12.3 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname EzVPN-Spoke-2 ! boot-start-marker boot-end-marker ! enable secret 5 $1$9BB/$KP4mHUWzUxzpuEPg5s7ow/ ! username admin password 7 10481A110C07 memory-size iomem 25 aaa new-model ! ! aaa authentication login USERLIST local aaa session-id common ip subnet-zero ! ! ip cef ip dhcp excluded-address 192.168.3.1 Easy VPN Configuration Example Configure 11 OL-6340-01 ! ip dhcp pool PRIVATE_DHCP import all network 192.168.3.0 255.255.255.0 default-router 192.168.3.1 !

! no ip domain lookup ip multicast-routing ip ids po max-events 100 ! no ftp-server write-enable voice-card 0 no dspfarm ! !--- IPSec configuration ! crypto ipsec client ezvpn VPN1 connect auto group VPN1 key cisco123 mode network-extension peer 10.32.152.26 username ezvpn-spoke2 password cisco2 ! interface FastEthernet0/0 description === private interface === ip address 192.168.3.1 255.255.255.0 duplex auto speed auto crypto ipsec client ezvpn VPN1 inside ! interface FastEthernet0/1 no ip address duplex auto speed auto shutdown ! interface Serial0/0/0 description === public interface === ip address 10.32.150.46 255.255.255.252 crypto ipsec client ezvpn VPN1 !

ip classless ip route 0.0.0.0 0.0.0.0 10.32.150.45 ! ip http server no ip http secure-server ! control-plane ! dial-peer cor custom ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login authentication USERLIST ! end Easy VPN Configuration Example Verify 12 OL-6340-01 Verify This section provides instructions for verifying that your configuration works properly. Certain show commands are supported by the Output Interpreter Tool (registered customers only), which allows you to view an analysis of show command output. In summary: • show crypto engine connections active—Shows the encrypted and decrypted packets. • show crypto ipsec sa—Shows the phase 2 IPSec security associations for the hub. • show crypto ipsec client ezvpn—Shows the phase 2 IPSec security associations for the EzVPN client. • show crypto isakmp sa—Shows the phase 1 ISAKMP security associations.

One of the first indications of successful IPSec negotiation is a message displayed on the Virtual Private Network (VPN) concentrator console. Upon successful IPSec negotiation by the EzVPN clients, a message similar to the following is displayed on the VPN concentrator console, indicating the establishment of crypto connections to the remote EzVPN clients. EzVPN-Hub# *Feb 23 10:33:10.663: %CRYPTO-5-SESSION_STATUS: Crypto tunnel is UP . Peer 10.32.150.46:500 Id: VPN1 *Feb 23 10:33:37.439: %CRYPTO-5-SESSION_STATUS: Crypto tunnel is UP . Peer 10.32.152.46:500 Id: VPN1 The following examples show sample output for the show crypto ipsec sa and show crypto ipsec client ezvpn commands. The following is sample output from the show crypto ipsec sa command, performed using the configuration on the EzVPN Hub location: EzVPN-Hub# show crypto ipsec sa interface: ATM0/0/0 Crypto map tag: INT_MAP, local addr. 10.32.152.26 protected vrf: local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0) remote ident (addr/mask/prot/port): (10.1.1.3/255.255.255.255/0/0) current_peer: 10.32.152.46:500 PERMIT, flags={} #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0 #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0 #pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0 #pkts not decompressed: 0, #pkts decompress failed: 0 #send errors 0, #recv errors 0 local crypto endpt.: 10.32.152.26, remote crypto endpt.: 10.32.152.46 path mtu 4470, media mtu 4470

current outbound spi: EBA2AC93 Easy VPN Configuration Example Verify 13 OL-6340-01 inbound esp sas: spi: 0xDBEB20(14412576) transform: esp-3des esp-md5-hmac , in use settings ={Tunnel, } slot: 0, conn id: 5131, flow_id: 11, crypto map: INT_MAP crypto engine type: Hardware, engine_id: 2 sa timing: remaining key lifetime (k/sec): (4570368/14331) ike_cookies: 787F69F1 41C7488D 92A37C71 AE8FEC38 IV size: 8 bytes replay detection support: Y inbound ah sas: inbound pcp sas: outbound esp sas: spi: 0xEBA2AC93(3953306771) transform: esp-3des esp-md5-hmac , in use settings ={Tunnel, } slot: 0, conn id: 5132, flow_id: 12, crypto map: INT_MAP crypto engine type: Hardware, engine_id: 2 sa timing: remaining key lifetime (k/sec): (4570368/14331) ike_cookies: 787F69F1 41C7488D 92A37C71 AE8FEC38 IV size: 8 bytes replay detection support: Y outbound ah sas: outbound pcp sas: protected vrf: local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0) remote ident (addr/mask/prot/port): (192.168.3.0/255.255.255.0/0/0) current_peer: 10.32.150.46:500 PERMIT, flags={} #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0 #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0

#pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0 #pkts not decompressed: 0, #pkts decompress failed: 0 #send errors 0, #recv errors 0 local crypto endpt.: 10.32.152.26, remote crypto endpt.: 10.32.150.46 path mtu 4470, media mtu 4470 current outbound spi: 59C46762 inbound esp sas: spi: 0xA9344358(2838774616) transform: esp-3des esp-md5-hmac , in use settings ={Tunnel, } slot: 0, conn id: 5129, flow_id: 9, crypto map: INT_MAP crypto engine type: Hardware, engine_id: 2 sa timing: remaining key lifetime (k/sec): (4574224/14292) ike_cookies: A479BC19 B6199FB9 E043AE83 9DECB0E8 IV size: 8 bytes replay detection support: Y inbound ah sas: inbound pcp sas: Easy VPN Configuration Example Troubleshoot 14 OL-6340-01 outbound esp sas: spi: 0x59C46762(1506043746) transform: esp-3des esp-md5-hmac , in use settings ={Tunnel, } slot: 0, conn id: 5130, flow_id: 10, crypto map: INT_MAP crypto engine type: Hardware, engine_id: 2 sa timing: remaining key lifetime (k/sec): (4574224/14292) ike_cookies: A479BC19 B6199FB9 E043AE83 9DECB0E8 IV size: 8 bytes replay detection support: Y outbound ah sas: outbound pcp sas:

The following is sample output from the show crypto ipsec client ezvpn command, performed using the configuration on the EzVPN Spoke 1 location: EzVPN-Spoke-1#show crypto ipsec client ezvpn Easy VPN Remote Phase: 2 Tunnel name : VPN1 Inside interface list: FastEthernet0/0, Outside interface: Dialer0 Current State: IPSEC_ACTIVE Last Event: SOCKET_UP Address: 10.1.1.3 Mask: 255.255.255.255 DNS Primary: 192.168.168.183 DNS Secondary: 192.168.226.120 NBMS/WINS Primary: 192.168.179.89 NBMS/WINS Secondary: 192.168.2.87 Default Domain: cisco.com The following is sample output from the show crypto ipsec client ezvpn command, performed using the configuration on the EzVPN Spoke 2 location: EzVPN-Spoke-2#show crypto ipsec client ezvpn Easy VPN Remote Phase: 2 Tunnel name : VPN1 Inside interface list: FastEthernet0/0, Outside interface: Serial0/0/0 Current State: IPSEC_ACTIVE Last Event: SOCKET_UP DNS Primary: 192.168.168.183 DNS Secondary: 192.168.226.120 NBMS/WINS Primary: 192.168.179.89 NBMS/WINS Secondary: 192.168.2.87 Default Domain: cisco.com Troubleshoot This section provides information for troubleshooting your configuration. See the following tech note: • IP Security Troubleshooting - Understanding and Using debug Commands

Easy VPN Configuration Example Troubleshoot 15 OL-6340-01 Troubleshooting Commands Note Before issuing debug commands, please see Important Information on Debug Commands. The following debug commands must be running on both IPSec routers (peers). Security associations must be cleared on both peers. • debug crypto engine—Displays information pertaining to the crypto engine, such as when Cisco IOS software is performing encryption or decryption operations. • debug crypto ipsec—Displays the IPSec negotiations of phase 2. • debug crypto ipsec client ezvpn—Displays the negotiation of the EzVPN client to the VPN concentrator. • debug crypto isakmp—Displays the ISAKMP negotiations of phase 1. • clear crypto ipsec client ezvpn—Clears an existing EzVPN connection. • clear crypto isakmp—Clears the security associations for phase 1. • clear crypto sa—Clears the security associations for phase 2. The following is an example of output for the debug crypto ipsec client ezvpn command: EzVPN-Spoke-1# debug crypto ipsec client ezvpn *May 24 03:04:51.923: EZVPN(VPN1): New State: CONNECT_REQUIRED ! !--- The following line shows the connection going down, not part of the debug output. ! *May 24 03:04:51.923: %CRYPTO-5-SESSION_STATUS: Crypto tunnel is DOWN. Peer 10.32.152.26:500 Id: 10.32.152.26 ! !---Debug output resumes ! *May 24 03:04:51.927: EZVPN(VPN1): Current State: CONNECT_REQUIRED

*May 24 03:04:51.927: EZVPN(VPN1): Event: CONNECT *May 24 03:04:51.927: EZVPN(VPN1): ezvpn_connect_request *May 24 03:04:51.927: EZVPN(VPN1): New State: READY *May 24 03:04:51.999: EZVPN(VPN1): Current State: READY *May 24 03:04:51.999: EZVPN(VPN1): Event: CONN_UP *May 24 03:04:51.999: EZVPN(VPN1): ezvpn_conn_up 7F890E16 DB923EE3 67C9C0D2 7EE723AC *May 24 03:04:51.999: EZVPN(VPN1): No state change *May 24 03:04:52.007: EZVPN(VPN1): Current State: READY *May 24 03:04:52.007: EZVPN(VPN1): Event: XAUTH_REQUEST *May 24 03:04:52.007: EZVPN(VPN1): ezvpn_xauth_request *May 24 03:04:52.007: EZVPN(VPN1): ezvpn_parse_xauth_msg *May 24 03:04:52.007: EZVPN: Attributes sent in xauth request message: *May 24 03:04:52.007: XAUTH_USER_NAME_V2(VPN1): *May 24 03:04:52.007: XAUTH_USER_PASSWORD_V2(VPN1): *May 24 03:04:52.007: EZVPN(VPN1): send saved username ezvpn-spoke1 and password *May 24 03:04:52.007: EZVPN(VPN1): New State: XAUTH_REQ *May 24 03:04:52.007: EZVPN(VPN1): Current State: XAUTH_REQ *May 24 03:04:52.007: EZVPN(VPN1): Event: XAUTH_REQ_INFO_READY *May 24 03:04:52.007: EZVPN(VPN1): ezvpn_xauth_reply *May 24 03:04:52.007: XAUTH_USER_NAME_V2(VPN1): ezvpn-spoke1 *May 24 03:04:52.011: XAUTH_USER_PASSWORD_V2(VPN1): *May 24 03:04:52.011: EZVPN(VPN1): New State: XAUTH_REPLIED *May 24 03:04:52.023: EZVPN(VPN1): Current State: XAUTH_REPLIED *May 24 03:04:52.023: EZVPN(VPN1): Event: XAUTH_STATUS *May 24 03:04:52.023: EZVPN(VPN1): New State: READY Easy VPN Configuration Example Related Information 16 OL-6340-01 *May 24 03:04:52.039: EZVPN(VPN1): Current State: READY *May 24 03:04:52.039: EZVPN(VPN1): Event: MODE_CONFIG_REPLY *May 24 03:04:52.039: EZVPN(VPN1): ezvpn_mode_config *May 24 03:04:52.039: EZVPN(VPN1): ezvpn_parse_mode_config_msg *May 24 03:04:52.039: EZVPN: Attributes sent in message:

*May 24 03:04:52.039: Address: 10.1.1.4 *May 24 03:04:52.039: DNS Primary: 192.168.168.183 *May 24 03:04:52.039: DNS Secondary: 192.168.226.120 *May 24 03:04:52.039: NBMS/WINS Primary: 192.168.179.89 *May 24 03:04:52.039: NBMS/WINS Secondary: 192.168.2.87 *May 24 03:04:52.039: Split Tunnel List: 1 *May 24 03:04:52.039: Address : 192.168.0.0 *May 24 03:04:52.039: Mask : 255.255.0.0 *May 24 03:04:52.039: Protocol : 0x0 *May 24 03:04:52.039: Source Port: 0 *May 24 03:04:52.039: Dest Port : 0 *May 24 03:04:52.039: EZVPN: Unknown/Unsupported Attr: SPLIT_DNS (0x7003) *May 24 03:04:52.039: Default Domain: cisco.com *May 24 03:04:52.039: Savepwd on *May 24 03:04:52.039: EZVPN: Unknown/Unsupported Attr: BACKUP_SERVER (0x7009) *May 24 03:04:52.039: EZVPN: Unknown/Unsupported Attr: APPLICATION_VERSION (0x7) *May 24 03:04:52.039: EZVPN(VPN1): ezvpn_nat_config *May 24 03:04:52.043: EZVPN(VPN1): New State: SS_OPEN *May 24 03:04:52.047: EZVPN(VPN1): Current State: SS_OPEN *May 24 03:04:52.047: EZVPN(VPN1): Event: SOCKET_READY *May 24 03:04:52.047: EZVPN(VPN1): No state change ! !--- The following line shows the connection coming up, not part of the debug output. ! *May 24 03:04:52.075: %CRYPTO-5-SESSION_STATUS: Crypto tunnel is UP . Peer 10.32.152.26:500 Id: 10.32.152.26 ! !---Debug output resumes ! *May 24 03:04:52.079: EZVPN(VPN1): Current State: SS_OPEN *May 24 03:04:52.079: EZVPN(VPN1): Event: MTU_CHANGED

*May 24 03:04:52.079: EZVPN(VPN1): No state change *May 24 03:04:52.079: EZVPN(VPN1): Current State: SS_OPEN *May 24 03:04:52.079: EZVPN(VPN1): Event: SOCKET_UP *May 24 03:04:52.079: ezvpn_socket_up *May 24 03:04:52.079: EZVPN(VPN1): New State: IPSEC_ACTIVE Easy VPN Configuration Example OL-6340-01 Easy VPN Configuration Example 8 OL-6340-01 Copyright © 2004 Cisco Systems, Inc. All rights reserved. CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, ScriptShare, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R)