Doc-20190329-wa0004.pdf
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Doc-20190329-wa0004.pdf as PDF for free.
More details
- Words: 1,104
- Pages: 5
Single acting spreader solenoid Typ GF1 and GF2 Double acting spreader solenoid Typ GF3 and GF4
The following electromagnets are examples for brake solenoids (spreader solenoids, brake magnets) realized in series. Magnetbau Schramme developments are customer-specific. If you are searching for the right electromagnet or solenoid for your series project, simply contact us for the perfect solution. Our team will help you - guaranteed. Please note that we do not have „ex stock“ standard products, and can therefore only process inquiries for series.
1
Single acting spreader solenoid Typ GF1 and GF2 Function Spreader solenoids are used almost only as actuation (releasing) magnets for brakes. Single-acting spreader solenoids are used almost only in moving stairways (escalators), or as replacement units for older elevators. Only double-acting spreader solenoids are allowed to be used in passenger elevators.
Operation Single-acting DC spreader solenoids consist of one electromagnet system which exerts a thrusting force. A hinge is provided at the rear, making the solenoid suitable for spreading as, for example, venting airbrakes. Electromagnetic force moves the plunger; it is returned by external force. An emergency manual control is installed.
Characteristics The fore of standard solenoids rises, with a high force combined with short stroke. Maintenance-free support of the plunger ensures a long service life.
Installation Instructions The solenoid can be installed in any position. The power transfer should take place only in axial direction; lateral loads on the plunger are to be avoided. When employing these units, the „Technical Introduction” is to be observed.
Nominal Data (recommended): Nominal supply voltage: Relative duty cycle: Insulation class: Limiting temperature: Degree of protection:
UN 24 VDC UN = 230 VAC (with built-in rectifer)r) 40% "H" according to VDE 0580 180 °C IP 43 according to DIN 40050
2 single acting spreader solenoid, double acting spreader solenoid, einfachspreizmagnet, doppelspreizmagnet, magnetbau-schramme, gf1, gf2, gf3, gf4© Magnetbau Schramme GmbH & Co. KG
Technical Data, Single acting spreader solenoid Typ GF1 and GF2 Power consumption at 20°C [W]
Magnetic Force Stroke start [N]
Magnetic Force Stroke end [N]N
Power consumption at 20°C [W]
Magnetic Force Stroke start [N]
Magnetic Force Stroke end [N]N
Weight [kg]
40% Duty Cycle
Stroke in [mm]
100% Duty Cycle
GF1 090 GF1 100
4 5
32 42
220 290
350 430
72 90
350 460
560 660
3,5 5,2
GF1 115 GF1 135 GF2 135 GF1 165 GF1 200
6 6 8 8 10
50 65 80 100 165
360 680 690 1200 2380
620 1030 1080 1800 3000
125 148 165 235 365
560 1080 1040 1850 3180
870 1530 1480 2650 4000
7,7 12,0 15,3 28,0 57
Typ/Modell
Installation drawing
Dimensions Dimensions in mm Typ
ØA A
B
C
ØD D
E
ØF F
G
ØH H
I
K
L
M
N
GF1 090
90
76
27,5
8
26
50
5
65
10
21
12
10
85
GF1 100
100
87
31
8
26
55
6
72
12
22
12
10
90
GF1 115
115
91
35
10
29
65
8
85
15
22
12
12
97
GF1 135
135
106
44
14
42
80
8
100
19
22
12
12
107
GF2 135
135
144
44
14
42
80
8
100
19
22
12
12
107
GF1 165
165
152
55
14
42
80
10
120
19
36
18
20
122
GF1 200
200
221
60
14
42
80
12
150
19
52
32
24
140
3 single acting spreader solenoid, double acting spreader solenoid, einfachspreizmagnet, doppelspreizmagnet, magnetbau-schramme, gf1, gf2, gf3, gf4© Magnetbau Schramme GmbH & Co. KG
Double acting spreader solenoid Typ GF3 and GF4 Function Spreader solenoids are used almost only as actuation (releasing) magnets for brakes. Single-acting spreader solenoids are used almost only in moving stairways (escalators), or as replacement units for older elevators. Only double-acting spreader solenoids are allowed to be used in passenger elevators.
Operation DC double-acting spreader solenoids consist of two magnet systems that are combined in a housing and operate pressure-exerting in opposed direction to each other. They are suitable for spreading applications, e.g., for releasing brakes The design provides relatively low weight and fast operating times. Electromagnetic force moves the plungers; they are returned by external force. An emergency manual control is installed which moves both plungers simultaneously.
Characteristics: The fore of standard solenoids rises, with a high force combined with short stroke. Galvanizing as corrosion inhibitor and maintenance-free support of the plunger ensures a long service life.
Installation Instructions The solenoid can be installed in any position. The power transfer should take place only in axial direction; lateral loads on the plunger are to be avoided. When employing these units, the „Technical Introduction” is to be observed.
Nominal Data (recommended): Nominal supply voltage: Relative duty cycle: Insulation class: Limiting temperature: Degree of protection:
UN 24 VDC UN = 230 VAC (with built-in rectifer)r) 40% "H" according to VDE 0580 180 °C IP 43 according to DIN 40050
4 single acting spreader solenoid, double acting spreader solenoid, einfachspreizmagnet, doppelspreizmagnet, magnetbau-schramme, gf1, gf2, gf3, gf4© Magnetbau Schramme GmbH & Co. KG
Technical Data, Double acting spreader solenoid Typ GF3 and GF4
250 360 480 720 960 1690
70 90 100 135 180 230
450 560 680 1100 1310 2300
Weight [kg]
460 570 620 1200 1400 2600
Hubendkraft in N
Hubanfangskraft in N
38 50 60 68 82 115
Leistungs-aufnahme P bei 20°C in W
2 2,5 3 3 4 4
40% Duty Cycle
Hubendkraft in N
GF3 090 GF3 100 GF3 115 GF3 135 GF4 135 GF3 165
Leistungs-aufnahme P bei 20°C in W Hubanfangskraft in N
Typ/Modell
Stroke in [mm]
100% Duty Cycle
550 780 750 1300 1590 2900
5,5 7,9 11,0 17,2 23,3 42
Installation drawing
Dimensions in mm Typ
ØA A
B
C
D
E
F
G
ØH H
I
J
K
L
M
ØN N
O
GF3 090
90
120
200
70
90
90
110
6,6
55
85
40
15
10
59
3
Ø PH9 6
GF3 100 GF3 115 GF3 135 GF4 135 GF3 165
100 115 135 135 165
136 140 165 225 250
216 230 255 315 390
80 90 120 120 160
100 100 110 110 170
105 115 145 145 190
125 125 135 135 200
9 9 9 9 11
60 75 90 90 105
90 100 110 110 130
40 45 45 45 70
15 15 15 15 15
10 12 12 12 20
59 72 72 72 104
3 3 3 3 3
8 8 8 8 8
Pg 11 11 11 11 11 11
5 single acting spreader solenoid, double acting spreader solenoid, einfachspreizmagnet, doppelspreizmagnet, magnetbau-schramme, gf1, gf2, gf3, gf4© Magnetbau Schramme GmbH & Co. KG
The following electromagnets are examples for brake solenoids (spreader solenoids, brake magnets) realized in series. Magnetbau Schramme developments are customer-specific. If you are searching for the right electromagnet or solenoid for your series project, simply contact us for the perfect solution. Our team will help you - guaranteed. Please note that we do not have „ex stock“ standard products, and can therefore only process inquiries for series.
1
Single acting spreader solenoid Typ GF1 and GF2 Function Spreader solenoids are used almost only as actuation (releasing) magnets for brakes. Single-acting spreader solenoids are used almost only in moving stairways (escalators), or as replacement units for older elevators. Only double-acting spreader solenoids are allowed to be used in passenger elevators.
Operation Single-acting DC spreader solenoids consist of one electromagnet system which exerts a thrusting force. A hinge is provided at the rear, making the solenoid suitable for spreading as, for example, venting airbrakes. Electromagnetic force moves the plunger; it is returned by external force. An emergency manual control is installed.
Characteristics The fore of standard solenoids rises, with a high force combined with short stroke. Maintenance-free support of the plunger ensures a long service life.
Installation Instructions The solenoid can be installed in any position. The power transfer should take place only in axial direction; lateral loads on the plunger are to be avoided. When employing these units, the „Technical Introduction” is to be observed.
Nominal Data (recommended): Nominal supply voltage: Relative duty cycle: Insulation class: Limiting temperature: Degree of protection:
UN 24 VDC UN = 230 VAC (with built-in rectifer)r) 40% "H" according to VDE 0580 180 °C IP 43 according to DIN 40050
2 single acting spreader solenoid, double acting spreader solenoid, einfachspreizmagnet, doppelspreizmagnet, magnetbau-schramme, gf1, gf2, gf3, gf4© Magnetbau Schramme GmbH & Co. KG
Technical Data, Single acting spreader solenoid Typ GF1 and GF2 Power consumption at 20°C [W]
Magnetic Force Stroke start [N]
Magnetic Force Stroke end [N]N
Power consumption at 20°C [W]
Magnetic Force Stroke start [N]
Magnetic Force Stroke end [N]N
Weight [kg]
40% Duty Cycle
Stroke in [mm]
100% Duty Cycle
GF1 090 GF1 100
4 5
32 42
220 290
350 430
72 90
350 460
560 660
3,5 5,2
GF1 115 GF1 135 GF2 135 GF1 165 GF1 200
6 6 8 8 10
50 65 80 100 165
360 680 690 1200 2380
620 1030 1080 1800 3000
125 148 165 235 365
560 1080 1040 1850 3180
870 1530 1480 2650 4000
7,7 12,0 15,3 28,0 57
Typ/Modell
Installation drawing
Dimensions Dimensions in mm Typ
ØA A
B
C
ØD D
E
ØF F
G
ØH H
I
K
L
M
N
GF1 090
90
76
27,5
8
26
50
5
65
10
21
12
10
85
GF1 100
100
87
31
8
26
55
6
72
12
22
12
10
90
GF1 115
115
91
35
10
29
65
8
85
15
22
12
12
97
GF1 135
135
106
44
14
42
80
8
100
19
22
12
12
107
GF2 135
135
144
44
14
42
80
8
100
19
22
12
12
107
GF1 165
165
152
55
14
42
80
10
120
19
36
18
20
122
GF1 200
200
221
60
14
42
80
12
150
19
52
32
24
140
3 single acting spreader solenoid, double acting spreader solenoid, einfachspreizmagnet, doppelspreizmagnet, magnetbau-schramme, gf1, gf2, gf3, gf4© Magnetbau Schramme GmbH & Co. KG
Double acting spreader solenoid Typ GF3 and GF4 Function Spreader solenoids are used almost only as actuation (releasing) magnets for brakes. Single-acting spreader solenoids are used almost only in moving stairways (escalators), or as replacement units for older elevators. Only double-acting spreader solenoids are allowed to be used in passenger elevators.
Operation DC double-acting spreader solenoids consist of two magnet systems that are combined in a housing and operate pressure-exerting in opposed direction to each other. They are suitable for spreading applications, e.g., for releasing brakes The design provides relatively low weight and fast operating times. Electromagnetic force moves the plungers; they are returned by external force. An emergency manual control is installed which moves both plungers simultaneously.
Characteristics: The fore of standard solenoids rises, with a high force combined with short stroke. Galvanizing as corrosion inhibitor and maintenance-free support of the plunger ensures a long service life.
Installation Instructions The solenoid can be installed in any position. The power transfer should take place only in axial direction; lateral loads on the plunger are to be avoided. When employing these units, the „Technical Introduction” is to be observed.
Nominal Data (recommended): Nominal supply voltage: Relative duty cycle: Insulation class: Limiting temperature: Degree of protection:
UN 24 VDC UN = 230 VAC (with built-in rectifer)r) 40% "H" according to VDE 0580 180 °C IP 43 according to DIN 40050
4 single acting spreader solenoid, double acting spreader solenoid, einfachspreizmagnet, doppelspreizmagnet, magnetbau-schramme, gf1, gf2, gf3, gf4© Magnetbau Schramme GmbH & Co. KG
Technical Data, Double acting spreader solenoid Typ GF3 and GF4
250 360 480 720 960 1690
70 90 100 135 180 230
450 560 680 1100 1310 2300
Weight [kg]
460 570 620 1200 1400 2600
Hubendkraft in N
Hubanfangskraft in N
38 50 60 68 82 115
Leistungs-aufnahme P bei 20°C in W
2 2,5 3 3 4 4
40% Duty Cycle
Hubendkraft in N
GF3 090 GF3 100 GF3 115 GF3 135 GF4 135 GF3 165
Leistungs-aufnahme P bei 20°C in W Hubanfangskraft in N
Typ/Modell
Stroke in [mm]
100% Duty Cycle
550 780 750 1300 1590 2900
5,5 7,9 11,0 17,2 23,3 42
Installation drawing
Dimensions in mm Typ
ØA A
B
C
D
E
F
G
ØH H
I
J
K
L
M
ØN N
O
GF3 090
90
120
200
70
90
90
110
6,6
55
85
40
15
10
59
3
Ø PH9 6
GF3 100 GF3 115 GF3 135 GF4 135 GF3 165
100 115 135 135 165
136 140 165 225 250
216 230 255 315 390
80 90 120 120 160
100 100 110 110 170
105 115 145 145 190
125 125 135 135 200
9 9 9 9 11
60 75 90 90 105
90 100 110 110 130
40 45 45 45 70
15 15 15 15 15
10 12 12 12 20
59 72 72 72 104
3 3 3 3 3
8 8 8 8 8
Pg 11 11 11 11 11 11
5 single acting spreader solenoid, double acting spreader solenoid, einfachspreizmagnet, doppelspreizmagnet, magnetbau-schramme, gf1, gf2, gf3, gf4© Magnetbau Schramme GmbH & Co. KG
More Documents from "Devdatta Mhaiskar"
Cd4011.pdf
April 2020 0
