DESIGN SYMBOLS: SPARK PLUGS DESIGN SYMBOLS: SPARK PLUGS Thread Reach Thread Diameter Reach Diameter E: 19 mmThread (3/4”) mm A: 18Thread
B: C: D: J:
A: 18 mm 14 mm B: 14 mm 10 mm C: 10 mm 12 mm D: 12 mm 12 mm J:
12 mm
Construction (ONE OR MORE LETTERS Construction MAY BE COMBINED) (ONE OR MORE LETTERS
C: K: M: P: R: U: Z:
E: 19 mm (3/4”) Tapered Seat (.708” Reach) 17.5 mmTapered CM: EF: Seat 17.5 mm (.708” Reach) FS: Tapered Seat E: (.460”) Seat 10.9 mmTapered FS: 10.9 mm (.460”) H: 12.7 mm (1/2”) ES: H: 12.7 mm (1/2”) F: EH: Partial thread (3/4” Total Reach 19 mm ) EH: Partial thread (1/2” Total 12.7 mm19 (3/4” Total Reach) G: mm Thread) 12.7 mm (1/2” Total EF:
MAY BE COMBINED)
Thread)
Hex Size 5/8” C:SizeHex Hex 5/8”Size 5/8” ProjectedHex TipSize (ISO)5/8” K: Tip (ISO) CompactProjected Type
M: Compact Projected InsulatorType Type P: Projected Insulator Resistor Type Type R: or Resistor Surface Semi- Type Surface Discharge Surface or SemiType U: Surface Discharge InductiveType Resistor
Z:
A: B: C:
Inductive Resistor
L: S: Z:
11.2 mm (7/16”) L: 11.2 mm (7/16”) 9.5 mm (3/8”) Reach S: 9.5 mm (3/8”) Reach 21 mm Z: 21 mm
NO SYMBOL: NO SYMBOL: 18mmø = 12 mm Reach 18mmø = 12 mm Reach 14mmø = 9.5 mm (3/8”) Reach= 9.5 mm (3/8”) 14mmø Reach
G-G: GP: GV: IX: K: L: LM:
Firing End Construction Firing End Construction 2-Ground electrodes
M: Special Design For Mazda Rotary Eng. electrodes M: 2-Ground A:Design Special Design Special For electrode Mazda Rotary Eng. Special Side N: Low B: AngleSpecial Design Special Side electrode Ground Electrode N: Platinum P: Premium Low Angle C: Ground Compact type, lowElectrode angle P: Premium Platinum 4-Ground ground electrode Q: electrode Compact type, low angle 4-Ground CM: V-Groovedground centerelectrode Q: electrode Special Ground electrode V-Grooved (14mm only) center R: electrode Special Ground 1.5mm electrode (14mm only) E:Insulator R: 2.5mmø Insulator Standard 1.5mm 3/4” Thread Reach Standard electrode S: center (2.5mm) center electrode electrode Standard 3/4” Thread Reach Standard 2.5mmø S: center ES: (2.5mm) center electrode electrode Tapered Seat 3-Ground T: electrode Fine F: wire Tapered Seat 3-Ground T: electrode nickel alloyFine center wire Semi-surface U: electrode dischargeSemi-surface G: nickel alloy center U: electrode Copper core ground electrode Fine wire discharge G-G: Copper core ground electrode V: gold palladium Fine wire Platinum Firewire (6mm) center electrode V: gold palladium Platinum Firewire (6mm) GP: Gold-palladium center center electrode High performance electrode Special Construction VX: platinum High performance Gold-palladium center of V-Type.electrode Special Construction VX: GV: Racing use Tungsten platinum of V-Type. Racing use High Performance W: electrode Tungsten Iridium High Performance W: electrode IX: X: Booster gap 2-Ground Iridium electrodes V-Grooved center gap X: Booster 2-Ground electrodes Half K: heat range, Y: electrode V-Grooved (14mm only) center (See spec.Half chart) range, 2.5mm Y:Insulator electrode (14mm only) L: (Seeheat spec. chart) Compact type for 2.5mm Insulator Z: Thick 2.9mmø Lawn Mower Compact type for center electrode Thick 2.9mmø LM: Lawn Z: Mower center electrode
B BC CP PR R6 6E ES S 1111 I: L: P: Z:
Plug Type Plug Type
Z:
Extended Gap
8 9
10 Firing End ContrucHeat Rating Numtion End Contrucbers Rating NumFiring Heat 11 tion 2 Hot bers
Iridium Platinum I: Iridium Platinum Thread Reach 26.5mm L: Thread Reach 26.5mm Premium PlatinumPremium P: ExtendedPlatinum Gap
– WIDE GAP – – WIDE GAP –
2 Hot
A, B, C...: Special A,Design B, C...: Special Design
13 14 15 20
11 Cold
11 Cold
P PF FR R6 6A A 1111 Metal Shell Size Metal Shell Size
F: ø 14, 19mm (3/4”) Reach, 16mm (5/8”) Hex. F:19mm ø 14, 19mm (3/4”)20.6mm Reach, 16mm G: ø 14, (3/4”) Reach, (13/16”)(5/8”) Hex.Hex. G:19mm ø 14, 19mm (3/4”)19mm Reach, 20.6mm (13/16”) Hex. J: ø 12, (3/4”) Reach, Hex. J:19mm ø 12, 19mm (3/4”)16mm Reach, 19mm Hex. M: ø 10, (3/4”) Reach, (5/8”) Hex. M: ø 10, 19mm (3/4”) Reach, 16mm (5/8”) T: Tapered Seat ø 14, 17.5mm Reach, 16mm (5/8”)Hex. Hex. T: Tapered Seat ø 14, 17.5mm Reach, 16mm (5/8”) Hex. PTR5A-13: ø 14, 25mm Reach, 16mm (5/8”) Hex. PTR5A-13: ø 14, 25mm Reach, 16mm (5/8”) Hex. 2
2
Construction Construction
R:
Resistor
R:
Resistor
0.8mm (.032”) 8 0.8mm (.032”) 0.9mm (.036”) 9 0.9mm (.036”) 1.0mm (.040”) 10 1 . 0 m m ( . 0 4 0 ” ) 1.1mm (.044”) 11 1 . 1 m m ( . 0 4 4 ” ) 1.3mm (.052”) 13 1 . 3 m m ( . 0 5 2 ” ) 1.4mm (.055”) 14 1 . 4 m m ( . 0 5 5 ” ) 1.5mm (.060”) 15 1 . 5 m m ( . 0 6 0 ” ) 2.0mm (.080”) 20 2 . 0 m m ( . 0 8 0 ” )
DESIGN SYMBOLS: SPARK PLUGS Firing End Construction
Thread Diameter
R
T
A: B: C: D: J:
18 mm 14 mm
5
E:
12 mm
5
EF:
Tapered Seat 17.5 mm (.708” Reach)
FS:
Tapered Seat 10.9 mm (.460”)
10 mm 12 mmR: with Resistor
19 mm (3/4”)
HEATING RATE 4 Hot H: 12.7 mm (1/2”) 6 Cold
EH: Construction (ONE OR MORE LETTERS Letter MAY BE COMBINED)
C: K:
Hex Size 5/8” F Hex Size 5/8”F-1 Projected Tip (ISO)
M:
Compact TypeT
P:
Projected Insulator T-1 Type U
R:
Resistor Type W
U:
X Surface or SemiSurface Discharge Y Type
Z:
Inductive Resistor
M: 2-Ground electrodes Special Design For Mazda Rotary Eng. Special Design N: Special Side electrode Low Angle Ground Electrode P: Premium Platinum Compact type, low angle CM: ground electrode Q: 4-Ground electrode Special Design Type V-Grooved centerIX: Iridium IX Series (Serial Number) Special Ground E: electrode (14mm only) R: electrode 1.5mm Insulator A: B: C:
Thread Reach
Partial thread 19 mm (3/4” Total Reach) 12.7 mm (1/2” Total
L:
G: Reach
G-G:
11.2 mm (7/16”)
14 mm Hex. 5/8" 3/4" (19mm) GP: 14S: mm9.5 Hex. 5/8" 22mm mm (3/8”) Reach 14 mm 3/4" (19mm) GV: mm5/8" 14Z: mm21Hex. .708" 14 mm Hex. 5/8" .807" IX: NO SYMBOL: 14 mm .460" K: 18 mm .460" 18mmø = 12 mm Reach 14 mm 3/8" L: 14 mm .460" 14mmø = 9.5 mm (3/8”)
G
LM:
Reach
HEAT RATING Hot = 4 Cold = 7
Prefix
Hex
5/8" (ISO)
BR Platinum I: Iridium BR
14mm 2 Hot
5/8"
14mm
U: Semi-surface discharge Seat Type
Insulator Type
Copper core ground electrode
Fine wire
gold palladium V: Gasket Seat PlatinumProjected Firewire (6mm) center electrode Projected Gasket Seat Gold-palladium center High performance electrode Projected Special Construction VX: Gasket Seat platinum of V-Type. Racing use Projected Taper Seat Tungsten High Performance Projected Seat W:Taper electrode Iridium Projected Taper Seat X: Booster gap 2-Ground electrodes Projected Taper Seat V-Grooved center Half heatProjected range, Gasket Seat(14mm only) Y: electrode (See spec. chart) 2.5mm Insulator Non-Projected Taper Seat Compact type for Lawn Mower
Z: Thick 2.9mmø
center electrode
11
Plug Type
8
0.8mm (.032”)
Suffix
9 Reach
0 . 9Type mm (.036”)
10
1.0mm (.040”)
3/4"
tion
Non-Projected
– WIDE GAP –
11 3/4"
Resistor
Non-Projected Resistor A, B, C...: Special
3/4"
13
E,EY,EYA
Seat Type Gasket Seat
1 . 1E,EY,EYA m m ( . 0 4 4 ” ) Gasket Seat
EF
Tapered Seat
EYA
Gasket Seat
1.3mm (.052”)
Design
3/4"
14 3/8"
1.4mm Y ( . 0 5 5 ” ) Gasket Seat
3/4" 15
1 . 5 mEY m ( . 0 6 0 ” ) Gasket Seat
13/16"
14mm
Non-Projected
3/4"
14mm
Projected
Non-Resistor
Premium BP Platinum
13/16"
14mm
Projected
Non-Resistor
BPR
13/16"
14mm
Projected
Resistor
BP
13/16"
11 Cold
14mm
Projected
Non-Resistor
1/2"
HN
Gasket Seat
B
13/16"
14mm
Non-Projected
Non-Resistor
3/8"
Y
Gasket Seat
BPMR (Compact Type)
3/4"
14mm
Projected
3/4"
14mm
Non-Projected
3/4"
14mm
Non-Projected
L: Thread Reach 26.5mm BPM (Compact Type) P: Z:
Extended Gap
BM (Compact Type) BMR (Compact Type)
P F R 6 A Metal Shell Size
F: G: J: Prefix M: ZGR T: ZGR PTR5A-13: ZFR
ZFR
2
Insulator Type
bers
Plug BKR Type
T: 3-Ground electrode
Fine wire nickel alloy center electrode
Firing End Contruc5/8" Heat Rating 14mm Num- Projected Resistor
BCPR
2.5mmø S: Standard center electrode
SPARK PLUG GAP None = .031(0.8mm) -11 = .043 (1.1mm)
B C P R 6 E S Thread Diameter
IX
Standard 3/4” Thread Reach GAP (2.5mm) 1.0mm center electrode NONEES:.039" 5 .059" Tapered 1.5mm Seat F: 0 .078" 2.0mm
Thread)
Thread Diameter
1
Resistor
3/4"
20
EY 2.0mm (.080”)
Gasket Seat
Resistor
3/8"
Y
Gasket Seat
Non-Resistor
3/8"
Y
Gasket Seat
Resistor
3/8"
A
Gasket Seat
Suffix Type
Seat Type
11
Construction
EXTENDED GAP TYPE
ø 14, 19mm (3/4”) Reach, 16mm (5/8”) Hex. ø 14, 19mm (3/4”) Reach, 20.6mm (13/16”) Hex.Insulator Thread ø 12, 19mm (3/4”) Hex. HexReach, 19mm Diameter ø 10, 19mm (3/4”) Reach, 16mm (5/8”) Hex.
13/16"
14mm
Type Projected
Resistor
3/4"
A
Gasket Seat
Projected
Resistor
22.0mm
C
Gasket Seat
Tapered Seat ø 14, 17.5mm Reach, 16mm (5/8”) Hex.
13/16"
14mm
ø 14, 25mm Reach, 16mm (5/8”) Hex.
Plug R: Resistor Type Reach
5/8" (ISO)
14mm
Projected
Resistor
22.5mm
E
Gasket Seat
5/8" (ISO)
14mm
Projected
Resistor
3/4"
F,J
Gasket Seat