Design Of Concrete Strctures

Design of Concrete Structures (Web Course) Faculty Coordinator(s): 1.

Prof. J. N. Bandyopadhyay Department of Civil Engineering Indian Institute of Technology Kharagpur Kharagpur - 721302 Email : [email protected] Telephone : (91-3222) 283 404 (Office) (91-3222) 283 405, 277 207 (Residence)

Detailed Syllabus :

Module:1 Objectives and Methods of Analysis and Design, and Properties of Concrete and Steel Lesson 1 Objectives and Methods of Analysis and Design Lesson 2 Properties of Concrete and Steel

Module:2 Philosophies of Design by Limit State Method Lesson 3 Philosophies of Design by Limit State Method

Module:3 Limit State of Collapse - Flexure (Theories and Examples) Lesson 4 Computation of Parameters of Governing Equations Lesson 5 Determination of Neutral Axis Depth and Computation of Moment of Resistance Lesson 6 Numerical Problems on Singly Reinforced Rectangular Beams Lesson 7 Numerical Problems on Singly Reinforced Rectangular Beams (Continued)

Module:4 Doubly Reinforced Beams – Theory and Problems Lesson 8 Doubly Reinforced Beams – Theory Lesson 9 Doubly Reinforced Beams – Theory

Module:5 Flanged Beams – Theory and Numerical Problems Lesson 10 Flanged Beams – Theory Lesson 11 Flanged Beams – Numerical Problems Lesson 12 Flanged Beams – Numerical Problems (Continued)

Module:6 Shear, Bond, Anchorage, Development Length and Torsion Lesson 13 Limit State of Collapse in Shear Lesson 14 Limit State of Collapse in Shear – Numerical Problems Lesson 15 Bond, Anchorage, Development Length and Splicing Lesson 16 Torsion in Beams - Limit State of Collapse

Module:7 Limit State of Serviceability Lesson 17 Limit State of Serviceability

Module:8 Reinforced Concrete Slabs Lesson 18 One-way Slabs Lesson 19 Two-way Slabs

Module:9 Staircases Lesson 20 Types and Design of Staircases

Module:10 Compression Members Lesson 21 Definitions, Classifications, Guidelines and Assumptions Lesson 22 Short Axially Loaded Compression Members Lesson 23 Short Compression Members under Axial Load with Uniaxial Bending Lesson 24 Preparation of Design Charts Lesson 25 Design of Short Columns under Axial Load with Uniaxial Bending Lesson 26 Short Compression Members under Axial Load with Biaxial Bending Lesson 27 Slender Columns

Module:11 Foundations - Theory and Design Lesson 28 Foundations – Theory Lesson 29 Design of Foundations

Module:12 Yield Line Analysis for Slabs Lesson 30 Basic Principles, Theory and One-way Slabs Lesson 31 Nodal Forces and Two-way Slabs Lesson 32 Two-way Rectangular, Square, Triangular and Circular Slabs Lesson 33 Numerical Examples

Module:13 Working Stress Method Lesson 34 Rectangular Beams under Flexure Lesson 35 Numerical Problems

Module:14 Tension Members Lesson 36 Structural Requirements, Code Stipulations and Governing Equations Lesson 37 Numerical Problems

Module:15 Redistribution of Moments Lesson 38 Redistribution of Moments – Theory and Numerical Problems

Module:16 Earthquake Resistant Design of Structures Lesson 39 Seismic Effects, Material Behaviour and General Principles of Earthquake Resistant Design of structures Lesson 40 Ductile Design and Detailing of Earthquake Resistant Structures