CX3_euro.qxd
07.1.19 16:00
Page 1
Stereo Receiver
DRA-CX3 CD/Super Audio CD Player
DCD-CX3 Speaker System
SC-CX303
CX3_euro.qxd
07.1.19 16:00
Page 2
Experience Denon’s Craftsmanship
07.1.19 16:00
Page 4
Beautiful to Hear and See, A Tactile Quality that's Wonderful to Behold.
CX3_euro.qxd
1)
CX3_euro.qxd
07.1.19 16:00
Page 6
7) iPod® connectivity using separately sold ASD-1R
terminals made of gold-plated, machined brass 6) Newly-developed drive mechanism utilising very thin (only 5mm) aluminium tray
controller, easy to operate and tastefully designed 4) Sturdy cabinet beautifully finished with natural wood 5) Large, newly-developed speaker
1) Aluminium top panel with heat discharge holes to minimise the effects of vibration on sound quality 2) Gentle red display panel 3) Slim remote
required by the most discerning audiophiles.
passion of a craftsman. Denon's CX3 delivers authenticity in sound
materials, parts, and crossover network; the uncompromising skill and
Complete attention to detail not only for sound but also for design,
7)
6)
5)
4)
3)
2)
07.1.19 16:00
Page 8
maximise the beauty of sound.
Every aspect of Denon audio technology that has been devoted to the DRA-CX3 is designed to
The DRA-CX3 delivers sound of uncompromised quality, a pure audio hallmark of Denon.
DRA-CX3
Stereo Receiver
CX3_euro.qxd
• Versatile connection environment for enjoying music from records, an iPod, and various other sources
• Built-in AM/FM tuner
• Slim system remote controller designed for ease of use and tasteful appearance
• Gold-plated, machined brass input terminals with 18cm pitch (for CD)
• Large speaker terminals made of gold-plated, machined brass, newly developed to also accommodate ultra-thick speaker cables
• MM/MC phono equalizer
Other features
Parts strictly selected for high sound quality
Thoroughly vibration-resistant construction
allowing the signal to bypass the tone circuit and further shorten the signal path for an even cleaner sound.
the signal path has been shortened as much as possible to prevent signal degradation. A Pure Direct mode is also provided,
used for switching input signals, adverse influences caused by resistance when the power is on have been eliminated and
The DRA-CX3 features a simple and straight signal path, designed to preserve the purity of the original sound. Since a relay is
Short Signal Path Circuitry, to suppress signal degradation
among the circuits or by current flowing into the ground circuits that form the foundation for amplification.
supply and ground circuit. This design ensures that sound quality is not degraded by mutual interference from the power supplies
stage, the control circuit around the microprocessor, the display circuit, and the signal switching relay each have their own power
To eliminate signal degradation caused by current leakage, the output stage, digital signal processing stage, analog signal processing
Separate power supplies and ground circuits for each stage
suppress the adverse effects of vibration and influences on sound quality.
The volume knob is constructed of a combination of natural briar wood and highly-rigid machined aluminium to sufficiently
controlled independently for left and right channels, and realises a simple signal path that does not require any complex circuitry.
The DRA-CX3 has a highly-reliable, high-precision volume control that can be adjusted in 0.5dB increments. Volume can be
Highly precise electronic volume
To bring out the best in artistic expression . . .
capacitor in the output stage power circuit to achieve a stable, high-grade supply of power.
instruments. In addition, an original Denon capacitor meticulously designed for high sound quality is used for the electrolytic
in the sound. This system thus accurately reproduces such sounds as delicate guitar picks and powerful attacks by percussion
power circuit uses a unique control system developed by Denon to ensure there is sufficient current even for instantaneous peaks
excels at supplying power in an instant, ensuring that there is always an efficient supply to support stable music playback. This
The DRA-CX3 is equipped with a power circuit capable of efficiently supplying highly stable electrical current. This compact circuit
Power unit capable of responding to sudden bursts of sound
ability of the DRA-CX3 to reproduce the full range of musical experience, from delicate nuances to dynamic sound.
and provide optimum shielding for high-frequency signals. Analyses of reliable technologies and careful listening have resulted in the
construction where the shield and heat sink are mounted directly onto a metal plate has been adopted to efficiently discharge heat
each other to minimise mutual interference on the signal and ensure that the music you hear is powerful and clear. A hybrid module
addition, the circuits of the preamp section and the power amp section, including their power units, are completely separated from
90%. Despite the DRA-CX3's compact size, it delivers a powerful output of 150W + 150W (at 4ohms) for superior speaker drive. In
Denon has newly developed its amplifier circuitry for Hi-Fi audio to achieve a high electric power conversion efficiency of around
Newly-developed amplifier circuitry, for improved power and clarity in music playback
To achieve robust yet pristine, stable sound . . .
07.1.19 16:01
Page 10
faithfully reproduce the original sound, Denon has significantly raised the standard of maturity for CD players.
From mechanisms that thoroughly suppress vibration to the meticulous reading of music information and the ability to
that Denon has contributed to the evolution of CD players.
The DCD-CX3 CD player embodies the culmination of a host of digital audio technologies
DCD-CX3
CD/Super Audio CD Player
CX3_euro.qxd
• Slim system remote controller designed for ease of use and tasteful appearance
• Optical digital outputs to accommodate connection of a digital recording device
enabling upgrades in sound quality using high-class audio RCA pin cables
• Gold-plated, machined brass input terminals with 18cm pitch (for CD),
• Plays MP3 and WMA files recorded on CD-R/RW discs
Other features
Vibration-resistant construction
High-accuracy D/A converter
produce a purer music playback environment.
the pulse signals for the display and digital data, adverse effects on the audio signal are eliminated to
The DCD-CX3 includes a Pure Direct mode to lend greater purity to the playback sound. By turning off
Pure Direct mode, for the enjoyment of pure music
for superior sound quality performance, the power supply is constantly stable and clear.
circuits, including their transformers, are completely independent, and together with a capacitor renowned
between the digital and analog circuits and achieve greater playback clarity. The digital and analog
A dual-transformer configuration has been adopted for the DCD-CX3 to eliminate mutual interference
Separate digital and analog transformers, for stable power supply and improved music playback performance
gentle curves in the sonic image.
This meticulous design minimises the influences of jitter and realises a clear, high-quality sound with
mance in Denon's high-end CD players as the master clock to supply signals to the various devices.
To secure reliable oscillation accuracy, the DCD-CX3 uses a DAC with a solid track record of perfor-
Highly reliable DAC master clock design
instants when it starts following complete silence.
ically improves the player's ability to reproduce the moments when music quietly fades away or
support lower quantization noise and higher sonic resolution and sampling. This technology dramat-
AL24 Processing is a high-grade analog waveform reproduction technology developed by Denon to
AL24 Processing, to dramatically enhance the music listening experience
To realise clear, natural music playback . . .
zinc has been used for the mechanism base, allowing the pickup to read information on the disc with even greater accuracy.
well. To thoroughly absorb vibrations from the mechanism itself or from external sources, the disc tray has been made of diecast aluminium for improved rigidity and diecast
disc rotation or vacillations ensures that even eccentric discs can be played without causing vibration. Anti-vibration construction has been introduced in other areas as
optical axis of the laser beam and to ensure a correct angle for the base of the pickup mechanism. The elaborate design that suppresses vibration caused by high-speed
and playability, the pickup section, vital for reading information from the disc, has been minutely adjusted in the manufacturing process to eliminate misalignments in the
originally developed for Denon's top-end players combined with newly-developed improvements. To improve reading accuracy and realise optimum signal reproduction
To achieve the ability to reliably and accurately read information from the disc within a player of slim design, the DCD-CX3 incorporates drive mechanism technology
Newly-developed mechanism to accurately read information from the disc
To faithfully reproduce music and convey original artistic intentions . . .
07.1.19 16:01
Page 12
acoustic effect of controlling sound waves transmitted to the surface. Also, delicate natural wood inlay has been added to the upper and lower areas of the baffle and in the corners of the sides to enhance rigidity as well as the beauty of the finish and to control the acoustics of the overall cabinet.
detailed simulation, have been carefully structured to achieve accurate piston motion across a broad
spectrum and prevent edge vibrations from adversely affecting the woofer's sonic characteristics.
technologies and materials to achieve optimum clarity and depth in sound.
• Rear duct to realise deep, transparent sound • Large speaker terminals made of gold-plated, machined brass, a Denon original
prevent the dome from swelling when the air inside heats up and to maintain uniform centering of the diaphragm. The ventilation holes also
prevent the voice coil and other sources of heat from subtly affecting the sound.
use OFC, and higher-grade cables have been used for the biwire shorts, to add greater detail to the sound quality.
ment conditions as well. There are independent network circuits for the tweeter and the woofer, and direct wiring rather than boards has been used in the configurations. Floating
• Includes anti-slip pad
Denon custom-made capacitors, coils, and internal OFC wiring material. The included speaker cables (3 meters x 2) also
The basic design of the network has been carefully considered not only in the energy and phase characteristics of the unit but in the acoustic reflections of the cabinet and place-
mounts on the cabinet have been used to minimise vibration and other adverse effects on sound quality.
Parts used in the network have undergone repeated listening tests. The ones selected under this strict regimen include
Crossover network, for uniform sound pressure and phase response
• Parts strictly selected for high sound quality
Other features
unit to improve the tweeter's low-range characteristics and produce more lustrous vocal sounds. Ventilation holes have been added to
magnets have been used in the magnetic circuitry. In addition, an aluminium diecast chamber has been placed at the rear of the tweeter
emerged as a result of assiduous analysis, tests, and adjustments that were repeated over and over again with the latest
The tweeters feature 2.5cm soft dome diaphragms to reproduce a natural acoustic effect, and highly magnetic, low-distortion neodium
The SC-CX303 was jointly developed by skilled European sound engineers and Denon. The high standard of craftsmanship
Soft dome tweeters, to realise a lustrous vocal sound
presence on a scale of grandeur that seems unimaginable for their compact size.
Born from European sound design and Denon collaboration
with a semi-glossy natural wood sliced veneer. The natural wood finish is not only pleasing to the eyes but also has the beautiful
weight, have been used in the woofer diaphragm. The dual-layered diaphragms, configured through
Combined with the highly-refined magnetic circuitry, these speakers deliver a sense of musical
The cabinets of the SC-CX303 have been fully constructed with 30cm thick medium-density fiberboard (MDF) and beautifully finished
D.D.L. (DENON Double Layer) cones utilising carbon fiber, renowned for superior rigidity and light
Cabinets made of 30mm MDF board with natural wood sliced veneer and inlaid work
are also float mounted, to thoroughly suppress acoustic reflections.
between the frame and the cabinet to float mount it, and the screws used to mount the tweeter unit frame (indicated in red in the diagram at the right)
The unit frame has been made of non-magnet diecast aluminium to protect it from the movement of the diaphragm. A damping material has been used
Unit frame made of non-magnetic diecast aluminium to keep sound clean
To refine sound and design to the ultimate extent . . .
Newly-developed 13cm D.D.L. cone woofer units utilising carbon fiber
To faithfully reproduce high-grade music signals with energy, delicacy and elegance . . .
uncompromising craftsmanship combine to produce a refined speaker system dedicated to an exceptional music listening experience.
Deep, rich texture and beautiful, natural sound. State-of-the-art audio technology incorporated in traditional speaker engineering and
SC-CX303
Speaker System
CX3_euro.qxd
07.1.19 16:01
Specifications
CX3_euro.qxd
Page 14
(Input: CD, Pure direct: ON)
BASS: 100Hz ± 8dB TREBLE: 10kHz ± 8dB 5Hz - 40kHz (+0.5dB, -3dB)
(input terminals short circuited)
CD, LINE1, LINE2, LINE3: 95dB
(with input terminals short circuited, 0.5mV input signal)
PHONO (MC): 70dB
(with input terminals short circuited, 5mV input signal)
PHONO (MM): 84dB
Crossover frequency Frequency range Sensitivity Maximum external dimensions Weight
Input impedance Max. input
Speakers
Type
SC-CX303 2-way 2-speakers Reflex box, Low-leakage-flux 13cm cone bass-mid x1 2.5cm soft dome high range x1 6Ω 100W (IEC) 200W (PEAK) 3kHz 35Hz - 60 kHz 86dB (1W, 1m) 182 (W) x 296 (H) x 293 (D) mm 8.7kg
Remote control unit (RC-1060) Batteries R03/AAA type x2 Maximum external dimensions 44 (W) x 233 (H) x 22 (D) mm Weight 165g (including batteries)
Switched outlet x1, Total capacity 100W (0.43A) AC 230V, 50Hz 105W Standby: 0.5W or less Maximum external dimensions 300 (W) x 80 (H) x 341(D) mm Weight 5.5kg
General Power outlet Power supply Power consumption
Frequency response
Tone control
(A-weighted network)
Properties S/N ratio
ASD-1R • Playback with ‘Command and Control’ of your iPod
Control Dock for iPod® (Optional)
For more details, please visit: http://blog.denon.com/asd-1r/
• Black version is available
• Recharge your iPod
0.5Vp-p/75Ω -15 - -21dBm
2 channels 2Hz - 20kHz 118dB 100dB 2.0V (10kΩ) 16-bit linear PCM 44.1kHz
CD
AC 230V, 50Hz 24W Standby: 0.2W or less 300 (W) x 80 (H) x 310 (D) mm 7.0 kg
– –
2 channels 2Hz - 50kHz (-3dB) 112dB (Audible range) 109dB (Audible range) 2.0V (10kΩ) 1-bit DSD 2.822MHz
Super Audio CD
Remote control unit (RC-1059) Batteries R03/AAA type x2 Maximum external dimensions 44 (W) x 233 (H) x 22 (D) mm Weight 165g (including batteries)
Maximum external dimensions Weight
General Power supply Power consumption
Digital output Coaxial Optical
Audio performance Analog output Channels Playback frequency response S/N Dynamic range Output level Signal type Sampling frequency
Receiver section Rated output 75W + 75W (8Ω, DIN, 1kHz, T.H.D. 0.7%) 150W + 150W (4Ω, DIN, 1kHz, T.H.D. 0.7%) High frequency distortion 0.05% (-3dB at rated output, 8Ω, 1kHz) Output terminals Speaker: 4 -16Ω Suited for headphones/ stereo headphones Equalizer amp output (REC OUT terminals) Rated output: 150mV Input sensitivity/ Input impedance PHONO (MM): 2.5mV/47kΩ PHONO (MC): 0.2mV/100Ω CD, LINE1, LINE2, LINE3: 130mV/47kΩ RIAA deviation PHONO(MM): 20Hz - 20kHz±0.5dB Reception frequency range FM: 87.5MHz - 108.0MHz AM: 522kHz - 1611kHz Reception sensitivity FM: 1.5µV/75Ω AM: 20µV FM channel separation 35dB (1kHz) FM S/N ratio Monaural: 74dB / Stereo: 70dB FM harmonic distortion Monaural: 0.3% / Stereo: 0.4%
DCD-CX3
DRA-CX3
CX3_euro.qxd
07.1.19 16:01
Page 16
Denon Brand Company D&M building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-8569 Japan www.denon.com
*Design and specifications are the subject to change without notice. *Super Audio CD is a registered trademark of Sony and Philips. *iPod® is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. *"WMA"(Windows Media Audio) is a new audio codec developed by Microsoft® in the United States of America. *“Windows Media™”, “Windows®” are trademarks of Microsoft Corporation, Inc.
55041206 B