D 3204-00 Simalum Finish.pdf

Product Data Sheet

SIMALUM FINISH

D 3204 - 00 A - two page issue

January 2008

DESCRIPTION Modified alkyd resin paint pigmented with aluminium. PRINCIPLE CHARACTERISTIC - High quality aluminium paint with an extensive range of application for exposure in atmospheric condition. - High brilliancy - Spray application improves the appearance - Heat resistance paint up to 175oC RECOMMENDED USE For protection of all types of metal and wood surfaces, either for interior or exterior. PRECEDING COAT SIMACHROMATE or SIMALED PRIMER SPECIFICATION DATA AT 20°C Gloss Semi gloss Colour Aluminium Specific gravity 1.0 ± 0.05 kg /litre Solids by volume 35 ± 2 % Flash point 39°C Recommended use Dry Film Thickness : min. 30 microns Wet Film Thickness : min. 86 microns Cov. theoretical 11.6 m2 / litre for 30 microns Drying time Touch dry : 1 hour Hard dry : 16 hours Painting interval Min. 6 hours Service temperature Continuous : 150°C Periodic up to : 175°C Shelf life 12 months (cool and dry place) SURFACE PREPARATION All surfaces should be clean, sound, smooth, dull and dry before paint is applied. Treat peeling, loose or blistering paint. Remove any oil, dust, and stain, dirt, meld and mildew. A good surface preparation is improve performance / life service. INSTRUCTION FOR USE Stir well before use, to achieve uniformity of colour and good homogeneity. RECOMMENDED THINNING Method of application Thinner No. Thinning Nozzle orifice Nozzle pressure

WE PROTECT YOUR INVESTMENT

Air Spray 42-00 5 – 10 % 2 - 3 mm 4 bar / 57 psi

Roller / Brush 42-00 5% -

Page 2 of 2

Jl. Lanbouw 1, Jagorawi-Cibinong Bogor, INDONESIA ; 021-8756310-11, 8753043 ; F : 021-8753042 ; www.sigmautama.com ; [email protected]

Product Data Sheet

SIMALUM FINISH

D 3204 - 00 A - two page issue

January 2008

SAFETY PRECAUTION Keep container tightly close and keep out from the children Keep away from food, drink, and animal feeding stuff Care must be taken when transporting paint. Keep container in a secure up-right position Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe the vapour or spray. Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations PACKING SIZE AND STORAGE Packing size : 5 and 20 litres Storage : The product must be storage in accordance with national regulation. Preferred storage conditions are to keep the containers in the dry space provided with adequate ventilation. The containers should be sealed tightly

HEALTH AND SAFETY: For detailed information on the health and safety hazards and precaution for use of this product, please see the MATERIAL SAFETY DATA SHEET.

The 6th Edition The information in this data sheet is to the best our knowledge connects at date printing. The company reserves the right to the modify data without notice. Any change in data will normally be followed by issued of new data sheet. The user should check the data of printing and if more than 12 months have elapsed, then the data should on only be used after checking with our nearest self-office to establish that they are still valid. Since condition of application and services may be beyond our control, no liability can accept on basis of this data.

WE PROTECT YOUR INVESTMENT

Page 2 of 2

Jl. Lanbouw 1, Jagorawi-Cibinong Bogor, INDONESIA ; 021-8756310-11, 8753043 ; F : 021-8753042 ; www.sigmautama.com ; [email protected]