Custom Window

The Custom Window Series 5000 window system is designed for home owners who desire the look and feel of institutional metal windows without the large framing members usually associated with commercial products. It features expansive areas of glass with minimal intrusion of the framing members, plus the look and feel of quality, energy efficient commercial grade windows. The Series 5000 combines the energy efficiency normally associated with residential products with the much higher standards for air infiltration, water resistance and durability of higher performing commercial grade windows. It incorporates double thermal breaks and hermetically sealed, insulated glass units for the highest energy values (U-Value of .23 on fixed and .36 on operating units). All opening ventilators are double weather-stripped and use durable, commercial grade hardware. The Series 5000 features a very small ratio of metal to glass and incorporates ventilators that swing open to the outside, and can be hinged from the top or from the side. Glazing options are available that will drastically reduce sound infiltration into your home.

Anodized Windows Finishes The Custom Window Company 5000 series window system is available in two different types of finishes, anodized or Kynar painted. Anodizing is an electrochemical process that thickens and toughens the naturally occurring protective oxide. The resulting finish, depending on the process, is the second hardest substance known to man, second only to the diamond. Anodizing is the most durable finish in high traffic areas, and provides a more "industrial" look to the project. Anodized finishes are available in clear, bronze or black hues. Anodize samples are always shown in a "range" from the lightest possible tint to the darkest possible tint.

Hardware The Custom Window Series 5000 window system incorporates only the highest quality, commercial-grade hardware. All of our hardware has been subjected to “life-cycle” testing to provide many years of service without failure. Hardware is available in a variety of finishes.

Hinges: Project-out "awning" windows use concealed, four-bar hinges of either zinc plated steel or stainless steel construction. These friction hinges allow the ventilator to open approximately 45 degrees. Ninety degree opening hinges are available for egress conditions. Outswing Casement ventilators use five knuckle butt hinges finished to match the windows.

Handles: Outswing casements are available in single action or multi-point action, allowing one handle to lock down the entire ventilator. Outswing “awning” windows use pivotshoe roto operators crank the window open and closed. The unique scissor action requires no extra locking handles to seal the ventilator closed.

Thermal Break Windows Glass Options The Custom Window 5000 series window system is available with either 1/4" glass or 1" insulated glass units. The glass can be either annealed, laminated or tempered depending upon codes and personal preferences. Glass is usually provided either clear or obscure. Popular options include gray, bronze or green tint. Higher energy performance can be obtained by specifying Low Emissivity (Low "E") coatings.