Curriculum-william Flores
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Curriculum-william Flores as PDF for free.
More details
- Words: 900
- Pages: 4
CURRICULUM VITAE Name: Birth date Nationality: Postal Address 1: Telephone: Email addresses:
WILLIAM SERGIO, FLORES ROMAN 18-09-76 Peruvian 3 Carlton Wharft St George Quay, Lancaster LA1 1RB, U.K. +44(0)7887970286 9(England) [email protected];[email protected] Summary of education, training and experience
1995-2001, Bachelor in Metallurgy from the National Engineering University of Peru (UNIVERSIDAD NACIONAL DE INGENIERIA), Faculty of Metallurgy. I graduated ranked within the first third among 12 undergraduate students. 2006-2007, Master in Advanced Metallurgy (Mmet) from The UNIVERSITY OF SHEFFIELD, Department of Engineering Materials getting distinction and distinction on project studying the “Analysis of inclusions in Mn/Si/Al killed steel, treated with calcium” 2003-2005, Professional experience in steel industry, working for the main Peruvian steel Producer CORPORACION ACEROS AREQUIPA as a manager of the quality control department in the steelmaking division. 2007 until the present time. Working for FIRST SUBSEA LTD as associate metallurgist in charge with the quality improvement of the forged billet in term of mechanical properties Details of education, training and experience
EDUCATIONAL BACKGROUND •
THE UNIVERSITY OF SHEFFIELD – England Sept 2006-Sept 2007
Master in Advanced Metallurgy, Graduated from the Material Engineering Department of the University of Sheffield .My Mmet Project done in this master course involves the analysis of the inclusion of Mn/Si/Al killed steel, treated with calcium”, this project was sponsored by Corus group (Steel producer) and thus Getting distinction. •
INTERNAL AUDITOR - ISO 9001 CERTIFIED BY BUREAO VERA VERITAS Jun 2004 IRCA: Sessions done in Hotel “Golf los Incas” -Peru
•
TECHNOLOGICAL INSTITUTE “TECSUP” March – Nov 2002
This course basically involved plant maintenance, getting one of the best overall average. The following subjects were taken into this course: Industrial Maintenance Hydraulic system Mechanical maintenance Manufacture for Maintenance
•
UNIVERSIDAD NACIONAL DE INGENIERIA ( National engineering University -PERU) 1995 – 2001
Bachelor in Metallurgy, graduated from the Mining, geology and Metallurgy department of the Universidad Nacional de Ingeniería, ranked within the first onethird among the 12 undergraduate students. PROFESSIONAL EXPERIENCE 1. FIRST SUBSEA (British company specialised in ball and taper technology) ( 2007 until the present time) Associate metallurgist (KTP associate) • •
•
Working on Heat treatment of large scale forged billet I have developed a 2D Heat transfer model in visual Basic program that combines conductive and convective heat transfer equation. This model is used to simulate the quenching process for different billet size and predict structure and mechanical properties in places where Charpy impact test and tensile test are performed. Developing a visual basic program that determine the boundary condition between the quenched billet and quenching media in term of convective heat transfer coefficient.
2. CORPORACION ACEROS AREQUIPA (Steel Producer). 2003-2005 Manager of quality control department in the steelmaking division • • • •
•
Dealing with both steelmaking division and continuous casting department to determine the optimum conditions to achieve good steel quality. Developing new process parameters according to our facilities and conditions during the production of low, medium and high carbon steel killed with Mn/Si and aluminium. Finding optimums parameters to avoid internal and superficial defects during the production of Billets. Control of mechanical properties of our Final Product such Rebar, structural steel, microalloyed steel, ornamental steel to satisfy international specification ASTM. For that purpose, regression model was carried out to predict the yield strength having as variables residual elements such as Sn, Cr, Cu, Ni, Mo. Internal auditor focus on processes, customer satisfaction and procedures applicable to service providers as manufacturers with greater emphasis on process management and measurement, continual improvement with greater top management involvement.
PRE-PROFESSIONAL EXPERIENCES 1. ACEROS BOHLER DEL PERU. (Heat treatment plant ) Nov – Dic 2002 •
Heat treatment of different type of Material basically steel and cast iron at which variables such as time, temperature and cooling rate are set up according to the desirable hardness. Carburizing Nitriding and carbo-nitriding Quenching Tempering Annealing 3. REFINERIA FUNSUR S.A ( Tin producer) Nov 2001- Feb 2002 •
Working for the electro-refining and sub-products division. Having as task the Metallurgical extraction of Cu in liquid solution and Pb, Ag as precipitation from spare material left during Electro-refining Process.
4. CORPORACION ACEROS AREQUIPA S.A (Steel producer) January – March 2001 •
Working for the metallurgical research department. Working on Heat treatment, direct reduction test to obtain sponge iron from pellets that are used in steelmaking process (primary steelmaking).
5. REFINERIA DE ZINC –CAJAMARQUILLA (Zinc producer )January – March 2000 •
Working for the Melting and Casting department. Having the responsibility of the production of Zamak-5 alloy.
OTHER QUALIFICATIONS •
Spanish – English, taking the international exam IELTS (INTERNATIONAL ENGLISH LANGUAGE TESTING SYSTEM). November 2005 getting a score of 6.5.
•
Course of CAMBRIDGE FIRST CERTIFICATE (Feb 2005 - Nov 2005). LONDON STUDY CENTRE.
•
Spanish Speaker
SOFTWARE •
Office: Advanced Excel-Visual Basic Word
• •
Power Point Design Program Autocad Statistics program SPSS
REFEREES and REFERENCES •
Dr Richard Thackray. Mmet, Phd. Lecturer of steelmaking process, light metal and Project supervisor - University of Sheffield. [email protected] Tel:+44(0)1142225960
•
Professor Panos Tsakiropoulos. Mmet, Phd. Professor of Metallurgy, lecturer in advanced metallurgy superalloys- University of Sheffield. [email protected] Tel:+44(0)1142225960
•
Dr Bradley Wynne. Beng Phd. Lecture in metallurgy and coordinator of the master of metallurgy- University of Sheffield. [email protected] Tel:+44(0)1142225960
•
Ing. Victor Granados Rivas. Senior Manager of the Metallurgical Department in the main steel Peruvian Producer “Aceros Arequipa” [email protected] Tel: 00511 5171800 extension 2350
WILLIAM SERGIO, FLORES ROMAN 18-09-76 Peruvian 3 Carlton Wharft St George Quay, Lancaster LA1 1RB, U.K. +44(0)7887970286 9(England) [email protected];[email protected] Summary of education, training and experience
1995-2001, Bachelor in Metallurgy from the National Engineering University of Peru (UNIVERSIDAD NACIONAL DE INGENIERIA), Faculty of Metallurgy. I graduated ranked within the first third among 12 undergraduate students. 2006-2007, Master in Advanced Metallurgy (Mmet) from The UNIVERSITY OF SHEFFIELD, Department of Engineering Materials getting distinction and distinction on project studying the “Analysis of inclusions in Mn/Si/Al killed steel, treated with calcium” 2003-2005, Professional experience in steel industry, working for the main Peruvian steel Producer CORPORACION ACEROS AREQUIPA as a manager of the quality control department in the steelmaking division. 2007 until the present time. Working for FIRST SUBSEA LTD as associate metallurgist in charge with the quality improvement of the forged billet in term of mechanical properties Details of education, training and experience
EDUCATIONAL BACKGROUND •
THE UNIVERSITY OF SHEFFIELD – England Sept 2006-Sept 2007
Master in Advanced Metallurgy, Graduated from the Material Engineering Department of the University of Sheffield .My Mmet Project done in this master course involves the analysis of the inclusion of Mn/Si/Al killed steel, treated with calcium”, this project was sponsored by Corus group (Steel producer) and thus Getting distinction. •
INTERNAL AUDITOR - ISO 9001 CERTIFIED BY BUREAO VERA VERITAS Jun 2004 IRCA: Sessions done in Hotel “Golf los Incas” -Peru
•
TECHNOLOGICAL INSTITUTE “TECSUP” March – Nov 2002
This course basically involved plant maintenance, getting one of the best overall average. The following subjects were taken into this course: Industrial Maintenance Hydraulic system Mechanical maintenance Manufacture for Maintenance
•
UNIVERSIDAD NACIONAL DE INGENIERIA ( National engineering University -PERU) 1995 – 2001
Bachelor in Metallurgy, graduated from the Mining, geology and Metallurgy department of the Universidad Nacional de Ingeniería, ranked within the first onethird among the 12 undergraduate students. PROFESSIONAL EXPERIENCE 1. FIRST SUBSEA (British company specialised in ball and taper technology) ( 2007 until the present time) Associate metallurgist (KTP associate) • •
•
Working on Heat treatment of large scale forged billet I have developed a 2D Heat transfer model in visual Basic program that combines conductive and convective heat transfer equation. This model is used to simulate the quenching process for different billet size and predict structure and mechanical properties in places where Charpy impact test and tensile test are performed. Developing a visual basic program that determine the boundary condition between the quenched billet and quenching media in term of convective heat transfer coefficient.
2. CORPORACION ACEROS AREQUIPA (Steel Producer). 2003-2005 Manager of quality control department in the steelmaking division • • • •
•
Dealing with both steelmaking division and continuous casting department to determine the optimum conditions to achieve good steel quality. Developing new process parameters according to our facilities and conditions during the production of low, medium and high carbon steel killed with Mn/Si and aluminium. Finding optimums parameters to avoid internal and superficial defects during the production of Billets. Control of mechanical properties of our Final Product such Rebar, structural steel, microalloyed steel, ornamental steel to satisfy international specification ASTM. For that purpose, regression model was carried out to predict the yield strength having as variables residual elements such as Sn, Cr, Cu, Ni, Mo. Internal auditor focus on processes, customer satisfaction and procedures applicable to service providers as manufacturers with greater emphasis on process management and measurement, continual improvement with greater top management involvement.
PRE-PROFESSIONAL EXPERIENCES 1. ACEROS BOHLER DEL PERU. (Heat treatment plant ) Nov – Dic 2002 •
Heat treatment of different type of Material basically steel and cast iron at which variables such as time, temperature and cooling rate are set up according to the desirable hardness. Carburizing Nitriding and carbo-nitriding Quenching Tempering Annealing 3. REFINERIA FUNSUR S.A ( Tin producer) Nov 2001- Feb 2002 •
Working for the electro-refining and sub-products division. Having as task the Metallurgical extraction of Cu in liquid solution and Pb, Ag as precipitation from spare material left during Electro-refining Process.
4. CORPORACION ACEROS AREQUIPA S.A (Steel producer) January – March 2001 •
Working for the metallurgical research department. Working on Heat treatment, direct reduction test to obtain sponge iron from pellets that are used in steelmaking process (primary steelmaking).
5. REFINERIA DE ZINC –CAJAMARQUILLA (Zinc producer )January – March 2000 •
Working for the Melting and Casting department. Having the responsibility of the production of Zamak-5 alloy.
OTHER QUALIFICATIONS •
Spanish – English, taking the international exam IELTS (INTERNATIONAL ENGLISH LANGUAGE TESTING SYSTEM). November 2005 getting a score of 6.5.
•
Course of CAMBRIDGE FIRST CERTIFICATE (Feb 2005 - Nov 2005). LONDON STUDY CENTRE.
•
Spanish Speaker
SOFTWARE •
Office: Advanced Excel-Visual Basic Word
• •
Power Point Design Program Autocad Statistics program SPSS
REFEREES and REFERENCES •
Dr Richard Thackray. Mmet, Phd. Lecturer of steelmaking process, light metal and Project supervisor - University of Sheffield. [email protected] Tel:+44(0)1142225960
•
Professor Panos Tsakiropoulos. Mmet, Phd. Professor of Metallurgy, lecturer in advanced metallurgy superalloys- University of Sheffield. [email protected] Tel:+44(0)1142225960
•
Dr Bradley Wynne. Beng Phd. Lecture in metallurgy and coordinator of the master of metallurgy- University of Sheffield. [email protected] Tel:+44(0)1142225960
•
Ing. Victor Granados Rivas. Senior Manager of the Metallurgical Department in the main steel Peruvian Producer “Aceros Arequipa” [email protected] Tel: 00511 5171800 extension 2350
