1998 Ford Mustang Engine - Cooling System 4.6L (SOHC) GT
4.6L (DOHC) COBRA
Cooler recovery system Standard (std., opt., n.a)
Standard, Quiescent bottle
Standard, Quiescent bottle
Coolant fill location (rad., bottle)
Bottle
Bottle
3.8L
Radiator Coolant Fill; Bottle Coolant Add
Radiator cap relief valve 97 - 127 (14 - 18); Mean 110.0 (16.0) pressure kPa (psi) 110 (16) Circulation thermostat Type (choke, bypass) Circulation thermostat Starts to open at deg C (deg F) Water pump - Type (centrifugal, other) Water pump -GPM 1000 pump rpm Water pump -Number of pumps Water pump -Drive (Vbelt, other) Water pump - Bearing type Water pump -Impeller material Water pump - Housing material By-pass recirculation type (inter., ext.) Cooling system capacity - With heater - L (qt) Cooling sytem capacity With air conditioner - L (qt) Cooling sytem capacity -Opt equipment specify L (qt) Water jackets full length of cyl (yes, no) Water all around
110.0 (16.0)
Reverse Poppet
Bypass
Bypass
91.7 (197)
90.6 (195)
82 (180)
Centrifugal
Centrifugal
Centrifugal
10
10
10
1
1
1
Six rib Poly V
Poly V-belt
Poly V-belt
Double Row, Sealed, Ball Ball & roller & roller
Ball & roller
Low carbon steel
Stamped steel
Stamped steel
Die cast aluminum
Die cast aluminum
Die cast aluminum
External
Internal
External
11.9 (12.6)
14.0 (14.8)
14.0 (14.7)
11.9 (12.6)
14.0 (14.8)
14.0 (14.7)
N/A
N/A
N/A
No
Yes
Yes
Yes
Yes
Yes
cylinder (yes, no) Water jackets open at head face (yes, no) Radiator core - Std., A/C, HD Radiator core - Type (cross-flow, etc.) Radiator core -Construction (fin & tube mechanical, braze, etc.)
No
Yes
Yes
Standard
Standard
Standard, A/C
Cross-flow
Cross-flow
Cross-flow
Tube and Center, Tube and slit fin, Vacuum Vacuum brazed brazed aluminum w/ aluminum w/ nylon end nylon end tanks tanks Vacuum brazed Radiator core -Material, Vacuum brazed aluminum, 8.48 (18.7) w/ mass kg (wgt, lbs) aluminum, 4.5 (9.5) MT, 9.13 (20.1) w/ AT
Tube and Fin Aluminum, 5.0 (11.0)
Radiator core -Width
609.5 (24.0)
609.5 (24.0)
570.0 (22.4)
Radiator core -Height
378 (14.9)
378 (14.9)
467.0 (18.4)
25.9 (1.0)
26.0 (1.02)
70 (FPDM)
19
33% Glass filled Nylon Ring
Mineral filled Nylon
Radiator core 25.9 (1.0) Thickness Radiator core - Fins per 70 (FPDM) inch Radiator end tank material
33% Glass filled Nylon
Engine - Cooling System (Fan)
Fan - Std., elec., opt. Fan -Number of blades & type (flex, solid, material) Fan - Number & location (front, rear of radiator) Fan - Diameter & projected width Fan - Ratio (fan to crankshaft rev.) Fan - Cutout type Fan -Drive type (direct, remote) Fan - RPM at idle (elec.)
3.8L
4.6L (SOHC) w/ GT
4.6L (DOHC) w/ COBRA
Electric Driven
Electric
Standard, electric
6 Blade nylon ring
6 Blade nylon ring
6, solid, nylon
Rear of radiator
Rear of radiator
One, Rear of radiator
445 MM
445 MM
465 mm
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1600
Low speed 1750;
Low speed 1750;
Fan - Motor rating 208 (wattage/elec.) Fan - Motor switch (type & Electrical - EEC location/elec.) Control Electrical - EEC Fan - Switch point Control, 102 deg. C (temp.,/pressure/elec.) (216 deg. F) Glass and mineral Fan - Shroud material filled nylon
High speed 1925 Low speed 286W; High speed 400W Electrical - EEC Control Electrical - EEC Control, 102 deg C (216 deg F) Glass and mineral filled nylon
High speed 1925 Low speed 286W; High speed 400W Electronic Control Module Variable w/ coolant temp. and A/C head pressure Glass and mineral filled nylon