Consolidated Objective
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Consolidated Objective as PDF for free.
More details
- Words: 1,743
- Pages: 7
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
OBJECTIVE TYPE: 1 A question on fit components. Which of the following contributes to fit. a. Data b. Structure c. People d. Rule e. All of the above 2.
Reliaability, timeliness, consistency are included in which component of fit a. Data b. Structure c. People d. Rule
3.
Who will develop the test process for software development using new technology?.(Almost same question was asked in Part 1 ad part a. Management b. Project team c. Auditor d. Tester and few more options 4. Which of the following are relatively complete acceptance criteria? a. Performance should increase b. Response time should be with in 10 sec c. Few more statements 5. Experienced people can be used as a tool for estimating the cost- Budgeting a. Bottom up b. Top down c. Expert judgment 6. The communication type which is rarely emphasized a. Listening b. Few more options . 7. which of the following model has these steps .. event identification , risk assessment, risk response a. ERM b. COSO internal control framework c. CobiT model 8. Utilize the computer resources to perform their work.. belong to which type of activity specified below a. Interface b. Development c. Computer operation 9. Obligations of both contractual parties should be spelled out in detail in which part of the contract a. What b. Who c. When d. How 10. Test planning activity which includes starting and end time for each test milestone. a. Budgeting b. Scheduling c. Estimation d. Staffing
Page 1 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
11. Who will assess vulnerability in the system a. Internal Control Officer (This was the right answer) b. System Security Officer c. QA Engineer 12. When does Integration Testing starts a. After Unit testing b. After unit testing before black box testing 13. When a defect is fixed in production how rather than in requirement, how much expensive is that a. 5 times b. 50 times c. 500 times 14. Most problems are due to a. Incorrect Data Entry b. Concentration of responsibility 15. What does code coverage ensure? a. Logic of the program is covered ? b. 100% path coverage ? 16. Juran is famous for (This was the First question) a. Quality Control b. Working on Trend Analysis c. Two more choices 17. V Model is a connection between (Easy question) a. Software Development and Testing activities b. All irrelevant choices 18. What is verification Technique (Easy Question) a. Inspection b. Unit Testing c. System Testing 19. What do we include in System test Plan a. Interfaces b. Data Inputs c. Functional Requirements d. All of the above 20. When to stop Testing (Confusing question) a. When u run out of time b. All test cases are done c. When quality goals established in the beginning of the projects are met. 21. What is the structure testing process a. Parallel b. Regression c. Stress d. Intersystem 22. Software testing activities should start a. as soon as the code is written b. during the design stage c. when the requirements have been formally documented d. as soon as possible in the development lifecycle 23. Which one of these is not a statistical test tool? a. Stratifying b. Check sheet c. Regression Analysis
Page 2 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
d. Flow Charts 24. What are Histograms commonly know as; a. Pie charts b. Scatter plots c. Bar Charts d. None of the above 25. Which is the reputed testing standard? a. M. Bridge awards b. ISO c. some more choices 26. Software testing activities should start a. during the design stage b. as soon as the code is written c. when the requirements have been formally documented d. as soon as possible in the development lifecycle 27. Which one of these is not a statistical test tool? a. Stratifying b. Check sheet c. Regression Analysis d. Flow Charts 28. What are Histograms commonly know as a. Pie charts b. Scatter plots c. Bar Charts d. None of the above 29. What are Pareto charts commonly know as a. 80-20 b. Scatter plots c. Check sheet d. None of the above 30. Which is the reputed testing standard? a. M. Bridge awards b. QAI c. ISO d. Microsoft 31. To which phase will training fall? a. Failure b. Prevention c. Build d. Appraisal 32. Cost of quality consists all of the below except a. Failure b. Appraisal c. Build d. Prevention 33. Who is not present Formal inspection a. Project Manager b. Facilitator c. Auditor d. Recorder e. Author 34. Which communication skill will be neglected by most a. Reading
Page 3 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
35. 36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
b. Listening c. Writing Therapeutic listening is a. Sympathetic listening b. Listening to pieces of information… Which model demonstrates relation between 2 or more parameters of effort, duration or resource? a. Cost b. Constraint c. Function Point In which model expertise can be used to estimate cost a. Top-Down b. Expert Judgment c. Bottom-Up Fit for use is a. Transcendent b. Product Based c. User Based d. Value Based Re-Use of data is done in which type of testing a. Capture/Play back b. System Testing c. Regression Testing d. Integration Testing In Acceptance testing, which data is used. a. Test Cases b. Use Case c. Test Plan In four components of FIT, reliability is included in (Similar type 2 qs) a. Data b. People c. Structure d. Rules Obligations of both contractual parties should be spelled out in a. What is done b. Who does it c. When it is done d. How it is done Dates on which Obligations need to be filled out should be specified in a. What is done b. Who does it c. When it is done d. How it is done A question on fit components. Which of the following contributes to fit . a. Data b. Structure c. People d. Rule e. All of the above Reliability, timeliness, consistency are included in which component of fit a. Data b. Structure c. People
Page 4 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
d. Rule 46. Who will develop the test process for software development using new technology?.(Almost same question was asked in Part 1 ad part a. Management b. Project team c. Auditor d. Tester and few more options 47. Which of the following are relatively complete acceptance criteria? a. Performance should increase b. Response time should be with in 10 sec c. Few more statements 48. Experienced people can be used as a tool for estimating the cost- Budgeting a. Bottom up b. Top down c. Expert judgment 49. The communication type which is rarely emphasized a. Listening b. Few more options . 50. Which of the following model has these steps.. event identification , risk assessment, risk response a. ERM b. COSO internal control framework c. CobiT model 51. Utilize the computer resources to perform their work.. belong to which type of activity specified below a. Interface b. Development c. Computer operation 52. Obligations of both contractual parties should be spelled out in detail in which part of the contract a. What b. Who c. When d. How 53. Test planning activity which includes starting and end time for each test milestone a. Budgeting b. Scheduling c. Estimation d. Staffing 54. Which of the following is not a perspective of quality? a. transcendent b. Product-based c. translucent d. user-based e. value-based f. manufacturing based 55. Defects are least costly to correct at what stage of the development cycle? a. Requirements b. Analysis & Design c. Construction d. Implementation 56. A review is what category of cost of quality?
Page 5 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
57.
58.
59. 60.
61.
62.
63.
64.
65.
66.
67.
a. Preventive b. Appraisal c. Failure Software testing accounts for what percent of software development costs? a. 10-20 b. 40-50 c. 70-80 d. 5-10 The purpose of software testing is to: a. Demonstrate that the application works properly b. Detect the existence of defects c. Validate the logical design Software inspections categorize defects as Wrong, Missing and Extra. a. TRUE b. FALSE The purpose of Risk Management in a project is to a. Eliminate Risks b. Minimize Risks c. Avoid risks d. Anticipate the risks Acceptance Testing is the responsibility of the: a. Programmer b. Project Leader c. Independent Tester d. Assistance programmer e. User/Customer Cost of Quality is least among a. Prevention b. Appraisal c. Failure Training come under what category cost of quality? a. Prevention b. Appraisal c. Failure The Pareto chart is more commonly known to information systems personnel as a. 80-20 Rule b. Trend analysis c. Other choices not sure Testing of the system to demonstrate system compliance with user requirements is: a. Black box testing b. System testing c. Independent testing d. Acceptance Testing Function point is a measure of a. Effort b. Complexity c. Usability d. None of the above An activity that verifies compliance with policies and procedures and ensures that resources are conserved is a. an inspection
Page 6 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
68.
69.
70.
71.
72. 73.
74. 75.
76.
b. an audit c. a review d. an assessment Which is the application for the process management and quality improvement concepts to software development and maintenance. a. Malcolm Baldridge b. ISO 9000 c. QAI d. QS14000 Software testing accounts for what percent of software development costs? a. 10-20 b. 30-60 c. 70-80 Software errors are least costly to correct at what stage of the development cycle? a. Requirements b. Construction c. Acceptance test d. Design Which of the following test approaches is not a Functional test approach? a. Control Technique b. Stress Technique c. Regression Technique d. Cause/effect Graphing e. Requirements Effectiveness is doing things right and efficiency is doing the right things a. True b. False Juran is famous for a. Quality Control b. Quality Assurance c. Trend Analysis Top down & Bottom Up are the part of Incremental Testing a. True b. False Achieving quality requires: a. Understanding the customers expectations b. Exceeding the customers expectations c. Meeting all the definitions of quality d. Focusing on the customer e. All the above Which is NOT the exit criteria for unit testing a. Code inspection b. Others choices not sure
Page 7 of 7
[email protected]
OBJECTIVE TYPE: 1 A question on fit components. Which of the following contributes to fit. a. Data b. Structure c. People d. Rule e. All of the above 2.
Reliaability, timeliness, consistency are included in which component of fit a. Data b. Structure c. People d. Rule
3.
Who will develop the test process for software development using new technology?.(Almost same question was asked in Part 1 ad part a. Management b. Project team c. Auditor d. Tester and few more options 4. Which of the following are relatively complete acceptance criteria? a. Performance should increase b. Response time should be with in 10 sec c. Few more statements 5. Experienced people can be used as a tool for estimating the cost- Budgeting a. Bottom up b. Top down c. Expert judgment 6. The communication type which is rarely emphasized a. Listening b. Few more options . 7. which of the following model has these steps .. event identification , risk assessment, risk response a. ERM b. COSO internal control framework c. CobiT model 8. Utilize the computer resources to perform their work.. belong to which type of activity specified below a. Interface b. Development c. Computer operation 9. Obligations of both contractual parties should be spelled out in detail in which part of the contract a. What b. Who c. When d. How 10. Test planning activity which includes starting and end time for each test milestone. a. Budgeting b. Scheduling c. Estimation d. Staffing
Page 1 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
11. Who will assess vulnerability in the system a. Internal Control Officer (This was the right answer) b. System Security Officer c. QA Engineer 12. When does Integration Testing starts a. After Unit testing b. After unit testing before black box testing 13. When a defect is fixed in production how rather than in requirement, how much expensive is that a. 5 times b. 50 times c. 500 times 14. Most problems are due to a. Incorrect Data Entry b. Concentration of responsibility 15. What does code coverage ensure? a. Logic of the program is covered ? b. 100% path coverage ? 16. Juran is famous for (This was the First question) a. Quality Control b. Working on Trend Analysis c. Two more choices 17. V Model is a connection between (Easy question) a. Software Development and Testing activities b. All irrelevant choices 18. What is verification Technique (Easy Question) a. Inspection b. Unit Testing c. System Testing 19. What do we include in System test Plan a. Interfaces b. Data Inputs c. Functional Requirements d. All of the above 20. When to stop Testing (Confusing question) a. When u run out of time b. All test cases are done c. When quality goals established in the beginning of the projects are met. 21. What is the structure testing process a. Parallel b. Regression c. Stress d. Intersystem 22. Software testing activities should start a. as soon as the code is written b. during the design stage c. when the requirements have been formally documented d. as soon as possible in the development lifecycle 23. Which one of these is not a statistical test tool? a. Stratifying b. Check sheet c. Regression Analysis
Page 2 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
d. Flow Charts 24. What are Histograms commonly know as; a. Pie charts b. Scatter plots c. Bar Charts d. None of the above 25. Which is the reputed testing standard? a. M. Bridge awards b. ISO c. some more choices 26. Software testing activities should start a. during the design stage b. as soon as the code is written c. when the requirements have been formally documented d. as soon as possible in the development lifecycle 27. Which one of these is not a statistical test tool? a. Stratifying b. Check sheet c. Regression Analysis d. Flow Charts 28. What are Histograms commonly know as a. Pie charts b. Scatter plots c. Bar Charts d. None of the above 29. What are Pareto charts commonly know as a. 80-20 b. Scatter plots c. Check sheet d. None of the above 30. Which is the reputed testing standard? a. M. Bridge awards b. QAI c. ISO d. Microsoft 31. To which phase will training fall? a. Failure b. Prevention c. Build d. Appraisal 32. Cost of quality consists all of the below except a. Failure b. Appraisal c. Build d. Prevention 33. Who is not present Formal inspection a. Project Manager b. Facilitator c. Auditor d. Recorder e. Author 34. Which communication skill will be neglected by most a. Reading
Page 3 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
35. 36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
b. Listening c. Writing Therapeutic listening is a. Sympathetic listening b. Listening to pieces of information… Which model demonstrates relation between 2 or more parameters of effort, duration or resource? a. Cost b. Constraint c. Function Point In which model expertise can be used to estimate cost a. Top-Down b. Expert Judgment c. Bottom-Up Fit for use is a. Transcendent b. Product Based c. User Based d. Value Based Re-Use of data is done in which type of testing a. Capture/Play back b. System Testing c. Regression Testing d. Integration Testing In Acceptance testing, which data is used. a. Test Cases b. Use Case c. Test Plan In four components of FIT, reliability is included in (Similar type 2 qs) a. Data b. People c. Structure d. Rules Obligations of both contractual parties should be spelled out in a. What is done b. Who does it c. When it is done d. How it is done Dates on which Obligations need to be filled out should be specified in a. What is done b. Who does it c. When it is done d. How it is done A question on fit components. Which of the following contributes to fit . a. Data b. Structure c. People d. Rule e. All of the above Reliability, timeliness, consistency are included in which component of fit a. Data b. Structure c. People
Page 4 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
d. Rule 46. Who will develop the test process for software development using new technology?.(Almost same question was asked in Part 1 ad part a. Management b. Project team c. Auditor d. Tester and few more options 47. Which of the following are relatively complete acceptance criteria? a. Performance should increase b. Response time should be with in 10 sec c. Few more statements 48. Experienced people can be used as a tool for estimating the cost- Budgeting a. Bottom up b. Top down c. Expert judgment 49. The communication type which is rarely emphasized a. Listening b. Few more options . 50. Which of the following model has these steps.. event identification , risk assessment, risk response a. ERM b. COSO internal control framework c. CobiT model 51. Utilize the computer resources to perform their work.. belong to which type of activity specified below a. Interface b. Development c. Computer operation 52. Obligations of both contractual parties should be spelled out in detail in which part of the contract a. What b. Who c. When d. How 53. Test planning activity which includes starting and end time for each test milestone a. Budgeting b. Scheduling c. Estimation d. Staffing 54. Which of the following is not a perspective of quality? a. transcendent b. Product-based c. translucent d. user-based e. value-based f. manufacturing based 55. Defects are least costly to correct at what stage of the development cycle? a. Requirements b. Analysis & Design c. Construction d. Implementation 56. A review is what category of cost of quality?
Page 5 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
57.
58.
59. 60.
61.
62.
63.
64.
65.
66.
67.
a. Preventive b. Appraisal c. Failure Software testing accounts for what percent of software development costs? a. 10-20 b. 40-50 c. 70-80 d. 5-10 The purpose of software testing is to: a. Demonstrate that the application works properly b. Detect the existence of defects c. Validate the logical design Software inspections categorize defects as Wrong, Missing and Extra. a. TRUE b. FALSE The purpose of Risk Management in a project is to a. Eliminate Risks b. Minimize Risks c. Avoid risks d. Anticipate the risks Acceptance Testing is the responsibility of the: a. Programmer b. Project Leader c. Independent Tester d. Assistance programmer e. User/Customer Cost of Quality is least among a. Prevention b. Appraisal c. Failure Training come under what category cost of quality? a. Prevention b. Appraisal c. Failure The Pareto chart is more commonly known to information systems personnel as a. 80-20 Rule b. Trend analysis c. Other choices not sure Testing of the system to demonstrate system compliance with user requirements is: a. Black box testing b. System testing c. Independent testing d. Acceptance Testing Function point is a measure of a. Effort b. Complexity c. Usability d. None of the above An activity that verifies compliance with policies and procedures and ensures that resources are conserved is a. an inspection
Page 6 of 7
[email protected]
CONSOLIDATED OBJECTIVE QUESTIONS FOR CSTE
68.
69.
70.
71.
72. 73.
74. 75.
76.
b. an audit c. a review d. an assessment Which is the application for the process management and quality improvement concepts to software development and maintenance. a. Malcolm Baldridge b. ISO 9000 c. QAI d. QS14000 Software testing accounts for what percent of software development costs? a. 10-20 b. 30-60 c. 70-80 Software errors are least costly to correct at what stage of the development cycle? a. Requirements b. Construction c. Acceptance test d. Design Which of the following test approaches is not a Functional test approach? a. Control Technique b. Stress Technique c. Regression Technique d. Cause/effect Graphing e. Requirements Effectiveness is doing things right and efficiency is doing the right things a. True b. False Juran is famous for a. Quality Control b. Quality Assurance c. Trend Analysis Top down & Bottom Up are the part of Incremental Testing a. True b. False Achieving quality requires: a. Understanding the customers expectations b. Exceeding the customers expectations c. Meeting all the definitions of quality d. Focusing on the customer e. All the above Which is NOT the exit criteria for unit testing a. Code inspection b. Others choices not sure
Page 7 of 7
[email protected]
Related Documents
Consolidated Objective
November 2019 20
Objective
June 2020 12
Objective
November 2019 23
C Consolidated
November 2019 15
Consolidated Cases.docx
June 2020 7