Configuration Ospf Original
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Configuration Ospf Original as PDF for free.
More details
- Words: 589
- Pages: 8
outer con0 is now available
Press RETURN to get started.
Router>enable Router#conf Router#configure ter Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#router os Router(config)#router ospf 1
Router(config-router)#network 172.16.3.0 0.0.0.255 area 0 Router(config-router)#network 192.168.1.8 0.0.0.3 area 0 Router(config-router)#end Router# %SYS-5-CONFIG_I: Configured from console by console Router#exit
Router con0 is now available
Press RETURN to get started.
00:15:05: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.1.9 on Serial0/0/0 from LOADING to FULL, Loading Done
Router>enable Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface Serial0/0/0 Router(config-if)#exit Router(config)#exit Router# %SYS-5-CONFIG_I: Configured from console by console Router#exit
Router con0 is now available
Press RETURN to get started.
Router>enable Router#conf Router#configure term Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interfac Router(config)#interface loo Router(config)#interface loopback 1
%LINK-5-CHANGED: Interface Loopback1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to up Router(config-if)#ip add Router(config-if)#ip address 192.168.50.1 255.255.255.0 Router(config-if)#no shu Router(config-if)#ip route Router(config-if)#ip rou Router(config-if)#exit Router(config)#ip route Router(config)#ip route 0.0.0.0 0.0.0.0 loop Router(config)#ip route 0.0.0.0 0.0.0.0 loopback 1 Router(config)#exit Router# %SYS-5-CONFIG_I: Configured from console by console Router#router Router#router ospf Router#router ospf 1 ^ % Invalid input detected at '^' marker.
Router#enable Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#router osp Router(config)#router ospf 1 Router(config-router)#redi Router(config-router)#redistribute st
Router(config-router)#redistribute static % Only classful networks will be redistributed Router(config-router)#exit Router(config)#exit Router# %SYS-5-CONFIG_I: Configured from console by console Router#show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
172.16.0.0/24 is subnetted, 2 subnets O
172.16.1.0 [110/1563] via 192.168.1.9, 00:05:41, Serial0/0/0
C
172.16.3.0 is directly connected, FastEthernet0/0 192.168.1.0/30 is subnetted, 3 subnets
O
192.168.1.0 [110/1562] via 192.168.1.9, 00:07:37, Serial0/0/0
O
192.168.1.4 [110/1562] via 192.168.1.9, 00:07:54, Serial0/0/0
C
192.168.1.8 is directly connected, Serial0/0/0
C
192.168.50.0/24 is directly connected, Loopback1
S* 0.0.0.0/0 is directly connected, Loopback1 Router#enable Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z. Router(config)#router ospf 1 Router(config-router)#de Router(config-router)#default-information o Router(config-router)#default-information originate Router(config-router)#exit Router(config)# Router(config)#exit Router# %SYS-5-CONFIG_I: Configured from console by console Router#show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
172.16.0.0/24 is subnetted, 2 subnets O
172.16.1.0 [110/1563] via 192.168.1.9, 00:08:12, Serial0/0/0
C
172.16.3.0 is directly connected, FastEthernet0/0 192.168.1.0/30 is subnetted, 3 subnets
O
192.168.1.0 [110/1562] via 192.168.1.9, 00:10:07, Serial0/0/0
O
192.168.1.4 [110/1562] via 192.168.1.9, 00:10:25, Serial0/0/0
C
192.168.1.8 is directly connected, Serial0/0/0
C
192.168.50.0/24 is directly connected, Loopback1
S* 0.0.0.0/0 is directly connected, Loopback1
Press RETURN to get started.
Router>enable Router#conf Router#configure ter Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#router os Router(config)#router ospf 1
Router(config-router)#network 172.16.3.0 0.0.0.255 area 0 Router(config-router)#network 192.168.1.8 0.0.0.3 area 0 Router(config-router)#end Router# %SYS-5-CONFIG_I: Configured from console by console Router#exit
Router con0 is now available
Press RETURN to get started.
00:15:05: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.1.9 on Serial0/0/0 from LOADING to FULL, Loading Done
Router>enable Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface Serial0/0/0 Router(config-if)#exit Router(config)#exit Router# %SYS-5-CONFIG_I: Configured from console by console Router#exit
Router con0 is now available
Press RETURN to get started.
Router>enable Router#conf Router#configure term Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interfac Router(config)#interface loo Router(config)#interface loopback 1
%LINK-5-CHANGED: Interface Loopback1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to up Router(config-if)#ip add Router(config-if)#ip address 192.168.50.1 255.255.255.0 Router(config-if)#no shu Router(config-if)#ip route Router(config-if)#ip rou Router(config-if)#exit Router(config)#ip route Router(config)#ip route 0.0.0.0 0.0.0.0 loop Router(config)#ip route 0.0.0.0 0.0.0.0 loopback 1 Router(config)#exit Router# %SYS-5-CONFIG_I: Configured from console by console Router#router Router#router ospf Router#router ospf 1 ^ % Invalid input detected at '^' marker.
Router#enable Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#router osp Router(config)#router ospf 1 Router(config-router)#redi Router(config-router)#redistribute st
Router(config-router)#redistribute static % Only classful networks will be redistributed Router(config-router)#exit Router(config)#exit Router# %SYS-5-CONFIG_I: Configured from console by console Router#show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
172.16.0.0/24 is subnetted, 2 subnets O
172.16.1.0 [110/1563] via 192.168.1.9, 00:05:41, Serial0/0/0
C
172.16.3.0 is directly connected, FastEthernet0/0 192.168.1.0/30 is subnetted, 3 subnets
O
192.168.1.0 [110/1562] via 192.168.1.9, 00:07:37, Serial0/0/0
O
192.168.1.4 [110/1562] via 192.168.1.9, 00:07:54, Serial0/0/0
C
192.168.1.8 is directly connected, Serial0/0/0
C
192.168.50.0/24 is directly connected, Loopback1
S* 0.0.0.0/0 is directly connected, Loopback1 Router#enable Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z. Router(config)#router ospf 1 Router(config-router)#de Router(config-router)#default-information o Router(config-router)#default-information originate Router(config-router)#exit Router(config)# Router(config)#exit Router# %SYS-5-CONFIG_I: Configured from console by console Router#show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
172.16.0.0/24 is subnetted, 2 subnets O
172.16.1.0 [110/1563] via 192.168.1.9, 00:08:12, Serial0/0/0
C
172.16.3.0 is directly connected, FastEthernet0/0 192.168.1.0/30 is subnetted, 3 subnets
O
192.168.1.0 [110/1562] via 192.168.1.9, 00:10:07, Serial0/0/0
O
192.168.1.4 [110/1562] via 192.168.1.9, 00:10:25, Serial0/0/0
C
192.168.1.8 is directly connected, Serial0/0/0
C
192.168.50.0/24 is directly connected, Loopback1
S* 0.0.0.0/0 is directly connected, Loopback1
