Comstar Supply,

  • Uploaded by: Comstar Supply
  • 0
  • 0
  • June 2020
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Comstar Supply, as PDF for free.

More details

  • Words: 992
  • Pages: 2
Comstar Supply,

5 Blue Heron Drive Collegeville, PA 19426 Phone: 610-831-5020 Fax: 610-831-5012

INC

Think Cable... Think Comstar

1-866-326-6782

www.comstarsupply.com

Limited Warranty Condux International, Incorporated extends the following warranty to the original purchaser of these goods for use, subject to the qualifications indicated: Condux International, Incorporated warrants to the original purchaser for use that the goods or any component thereof manufactured by Condux International will be free from defects in workmanship for a period of one year from the date of purchase, provided such goods are installed, maintained, and used in accordance with Condux’s written instructions. Components not manufactured by Condux International but used within the assembly provided by Condux International are subject to the warranty period as specified by the individual manufacturer of said component, provided such goods are installed, maintained, and used in accordance with Condux’s and the original manufacturer’s written instructions. Condux’s sole liability and the purchaser’s sole remedy for a failure of goods under this limited warranty, and for any and all claims arising out of the purchase and use of the goods, shall be limited to the repair or replacement of the goods that do not conform to this warranty.

USER'S GUIDE & SAFETY MANUAL To obtain repair or replacement service under the limited warranty, the purchaser must contact the factory for a Return Material Authorization (RMA). Once obtained, send the RMA along with the defective part or goods, transportation prepaid, to: Condux International, Inc. 145 Kingswood Road Mankato, MN 56001

USER'S GUIDE & SAFETY MANUAL

Jamb Skid

THERE ARE NO EXPRESS WARRANTIES COVERING THESE GOODS OTHER THAN AS SET FORTH ABOVE. THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. CONDUX ASSUMES NO LIABILITY IN CONNECTION WITH THE INSTALLATION OR USE OF THIS PRODUCT, EXCEPT AS STATED IN THIS LIMITED WARRANTY. CONDUX WILL IN NO EVENT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

®

Condux International, Inc. P.O. Box 247 • 145 Kingswood Road, Mankato, MN 56002-0247 507-387-6576 • 800-533-2077 • FAX 507-387-1442 Internet: http://www.condux.com

© Copyright 1996, Condux International, Inc. Printed in USA Literature Part Number: 08097099 Revision Number: 2.3

5 Blue Heron Drive

Collegeville, PA 19426

®

CONDUX (610) 831-5020

www.comstarsupply.com

Fax: (610) 831-5012

Comstar Supply,

5 Blue Heron Drive Collegeville, PA 19426 Phone: 610-831-5020 Fax: 610-831-5012

INC

Think Cable... Think Comstar

1-866-326-6782

www.comstarsupply.com

Installation Procedure NOTE:

Figure 1

Before proceeding, ensure that your extension is the correct length (see Table) and that your sheave or quadrant block uses a 1.25” diameter mounting pin.

Part No. 08097000 08097001 08097002 08097003

Description 46” Base Section 43” Extension 76” Extension 109” Extension

Manhole Height

Extension

49” - 80” 78” - 109” 107” - 138”

1. Lower the base section into the manhole with a rope, block and tackle, or the truck boom. Do not lower by hand - the unit is heavy.

Disengaged

Locking Pins

Figure 2

2. Place the base section in line with the duct. Fully disengage the cam-lock foot pedal and point it towards the duct (see Figure 1).

Manhole Base Section

3. Lower the extension into the manhole and place it over the base section. 4. Extend the extension at about a 75° angle until it contacts the manhole’s inside edge. Insert a locking pin through the extension & base sections (see Figure 2).

Cable Cam-lock Foot Pedal

Sheave

5. Loosen the bolts in the extension and base. Place the quadrant block or sheave wheel at the desired height and insert a locking pin. 6. Push the sides together into their most narrow configuration (see Figure 3), and tighten the bolts in the extension and base. 7. Align the Jamb Skid and the quadrant block or sheave wheel with the duct. Rotate the cam-lock foot pedal about 3/4 of its rotation away from the duct. 8. Push down on the cam-lock foot pedal until it goes beyond the engaged range and completely locks in place. If necessary, move the base section towards or away from the duct.

!WARNING: Read and understand all procedure and safety instructions before using any Condux Jamb Skid. Failure to do so may result in serious personal injury or death. Save this user’s guide for future reference. ADVERTENCIA

Instrucciones de Operación

!ADVERTENCIA: Favor de leer y comprender todas las instrucciones de operación y seguridad antes de usar el Condux® Rope to Rope/Grip Clevis. Si Ud. no comprende las instrucciones favor de consultarle a su jefe.

5 Blue Heron Drive

Jamb Skid Components

Duct

Removal Procedure

Jamb Skid

2. Disassemble and remove the Jamb Skid by reversing the installation procedures.

!CAUTION: Follow all standard manhole opening procedures, including work area protection and gas detection. Wear personal protective equipment: hard hat, safety glasses, safety shoes, and leather work gloves.

Collegeville, PA 19426

Locked

 ,,,,,   ,,,,,    ,,,,,    ,,,,,    ,,,,,     

Figure 3

Sheave

Duct

Jamb Skid

75°

1. Place a leverage bar below the cam-lock foot pedal and pry up to release the Jamb Skid.

!WARNING: Do not remain in the manhole when pulling cable. During a pulling operation, the Jamb Skid and cable are under tension. Serious personal injury or death may result if a component fails and releases its stored energy.

Fully Engaged

!WARNING: Do not use around live circuits. The aluminum Jamb Skid is highly conductive. Serious personal injury or death may result.

!CAUTION: The Jamb Skid locking pins rotate freely. Do not use the Jamb Skid as a ladder. Personal injury may result.

!WARNING: Ensure the Jamb Skid is properly aligned with the duct and the cam-lock foot pedal is fully locked. Do not exceed 10,000 lbs. of pulling force. Failure to do so may result in personal injury or property damage.

!CAUTION: Do not lower the Jamb Skid sections into the manhole by hand. Personal injury or property damage may result.

(610) 831-5020

www.comstarsupply.com

Fax: (610) 831-5012

Related Documents

Comstar Supply,
June 2020 8
Comstar Supply,
June 2020 8
Supply
October 2019 24
Supply
June 2020 6
Aggregate Supply
November 2019 22

More Documents from "Dynafrom"