Cola®Mine 11CM Chemical Description: Coconut Diethanolamide, modified
PROPERTIES • • • • •
High detergency High alkaline builder tolerance Moderate foam Good wetting ability Emulsifier
APPLICATIONS • • • •
Rinseable degreasers Waterless hand cleaners Chain lubricants I & I and Household hard surface cleaners
• • • • •
Soil dispersion and suspending ability Excellent lubricity Rust inhibition Biodegradability Excellent thickening ability
• • •
Metal burnishing compounds Food processing plant cleaners Transportation cleaners
TYPICAL PROPERTIES Appearance at 25°C Color (Gardner) pH, 1% aqueous Actives, % Viscosity, cps @ 25°C Flash Point (PMCC), °C Pour Point, oC Boiling Point, oC Cloud Point, as is, oC Density, g/ml (lbs/U.S. gal) Wetting Time (Draves 0.1%), sec Surface Tension, (0.1%), dynes/cm Foam Height, (Ross-Miles 0.05%), mm, initial HLB
225 Colonial Drive
South Pittsburg, TN 37380
Viscous liquid to paste 2 9.0 100 1000 - 1200 >94 6 >150 <0 0.991 (8.27) 29 29.1 70 14
Ph: 423-837-8800
Fax: 423-837-3888
SOLUBILITIES Water Alcohol Glycol Aromatic Hydrocarbons Chlorinated Hydrocarbons
Soluble X X X X X
Insoluble
BIODEGREDATION Cola®Mine 11CM is biodegradable.
TOXICITY Cola®Mine 11CM is practically non-toxic orally (LD50=12.2 g/kg) and it causes moderate skin and minimal eye irritation at 30% active.
STORAGE & HANDLING Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling Cola®Mine 11CM. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material.
CLEARANCES Cola®Mine 11CM is USDA authorized for general purpose cleaning and as an ingredient in lubricants. All components of Cola®Mine 11CM are listed in the following countries: the regristration numbers for the active ingredients are included in parentheses: Europe (EINECS 271-657-0), Japan (ENCS 2-827), Canada (DSL 68603-42-9) and Australia (AICS 68603-42-9).
FORMULATION WATERLESS HAND CLEANER Ingredient Cola®Mine 11CM Oleic Acid Triethanolamine (85%) Deodorized mineral spirits Glycerine DI Water TOTAL
Phase I:
Phase II:
Wt. % (as is) 5.0 5.0 1.5 45.0 1.5 42.0 100.0
Procedure: Mix ingredients in Phase I and heat to 70oC (158oF). Mix ingredients in Phase II and heat to 80oC (176oF). Add Phase II to I with vigorous stirring. Where facilities are available for packaging products of a gel or paste consistency, the above formulation can be
225 Colonial Drive
South Pittsburg, TN 37380
Ph: 423-837-8800
Fax: 423-837-3888
prepared at room temperature. This formulation is effective in removing grease, tar, paint, etc.
LAST UPDATED 07/14/2006
WARRANTY Colonial Chemical guarantees that its products meet published specifications. No other warranties or guarantees are expressed or implied because the use of this material is beyond the control of Colonial Chemical.
Colonial Chemical, Inc. www.colonialchem.com 225 Colonial Drive South Pittsburg, TN 37380
225 Colonial Drive
South Pittsburg, TN 37380
Ph: 423-837-8800 Fax: 423-837-3888
Ph: 423-837-8800
Fax: 423-837-3888