Colafax Cpe

  • April 2020
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Colafax Cpe as PDF for free.

More details

  • Words: 703
  • Pages: 4
Cola®Fax CPE CTFA/INCI NAME: Cetyl Phosphate EINECS # 222-581-1 CAS # 3539-43-3

DESCRIPTION Cola®Fax CPE is an oil soluble long chain organic phosphate ester supplied as a free acid in flake form. It is generally used as a co-emulsifier with low HLB nonionics, and is non-irritating to skin. Cola®Fax CPE is easily dissolved into either phase during emulsion processing and can be neutralized in-situ with various cations. Cola®Fax CPE, at low use concentrations, will enhance the stability of emulsions and thicken cremes and lotions. It can replace TEA-stearate in most preparations. Cola®Fax CPE is ideally suited for use in many dermatological and personal care products.

BENEFITS • • • • • • •

Emulsion stabilizer – overcomes imbalances in HLB emulsifier values for various oil systems. Easy to formulate. Acid form is oil soluble; neutralized salts are water-soluble. Can be substituted for polyacrylic acid type polymers, which are frequently utilized as emulsion stabilizers without increasing viscosity to an unacceptable limit. Physically easier to use than polyacrylic acid. No dispersion, wetting problems or fish eyes in solution. Good rub out and afterfeel. Does not inhibit quick break emulsion properties. Primary emulsifier – provides excellent performance at normal skin pH. Easy to handle flake, no noxious dust particles.

VISCOSITY RESPONSE Figure 1 demonstrates the effect Cola®Fax CPE has on emulsion viscosity. At low concentrations, Cola®Fax CPE will effectively increase viscosity and aid in the stabilization of the emulsion system. Formulations containing Cola®Fax CPE will display enhanced shear, heat and freeze-thaw stability. Cola®Fax CPE will also enhance the glossy appearance of cosmetic cremes.

TEST SYSTEM Water Glycerin Potassium Hydroxide (45%) Germaben II-E 225 Colonial Drive

% by Wt. q.s. 5.0 0.33-1.34 0.5

South Pittsburg, TN 37380

Ph: 423-837-8800

Fax: 423-837-3888

Cetyl Alcohol Myristyl Myristate Isopropyl Palmitate Cola®Fax CPE TOTAL

2.0 2.0 2.0 0.5-2.0 100.0

Emulsion pH 7.0 FIGURE 1 50000

Viscosity cP(Thousands)@ 25°C

45000 40000 35000 30000 25000 20000 15000 10000 5000 0 0

0.5

1

1.5

2

CPE Concentration %

NEUTRALIZATION Neutralizing Agent

Grams Required to Neutralize 1 Gram of Cola®Fax CPE pH 6.0 pH 7.0 0.36 0.42 0.56 0.67 0.67 0.81 0.39 0.48

Sodium Hydroxide (50%) Potassium Hydroxide (45%) Triethanolamine (99%) Aminomethylpropanol (95%)

TYPICAL PROPERTIES Appearance % Solids pH (10% in 50/50 IPA/Water) Melting Point 225 Colonial Drive

Waxy White Granule 100 <2 61°C

South Pittsburg, TN 37380

Ph: 423-837-8800

Fax: 423-837-3888

Specific Gravity (25°C) Acid Value (pH 5.0)

1.02 200

TOXICOLOGICAL PROPERTIES Dermal Evaluation (3% in water pH 7.0) 48 Hour Human Patch 25 Test Subjects

25/25 Completely Non-Irritating

In Vitro Ocular Evaluation (3% in water pH 7.0) Ropak, Eytex TM Rapid Membrane Assay Eyetex TM Classification: Minimal/Mild

SUGGESTED FORMULATIONS Moisturizing Sunscreen (SPF 15) Part A Cola®Fax CPE Cola®Lipid ST Water Potassium Hydroxide (45%) Germaben II-E Titanium Dioxide Total

% by Weight 1.0 2.5 78.7 0.4 0.4 0.4 100.0

Part B Cetyl Alcohol C 12-15 Alkyl Benzoate Isopropyl Palmitate Dimethicone (200/350cS) Octylmethoxy Cinnamate Menthyl Anthranilate Steareth-2 Total

% by Weight 2.0 1.6 2.0 1.0 6.0 3.0 1.0 100.0

Viscosity 250,000cps

pH 5.6

Deep Moisturizing Cream Part A Water Potassium Hydroxide (45%) Cola®Fax CPE Cola®Lipid ST Germaben II-E

% by Weight 84.5 0.4 1.0 2.5 0.6

225 Colonial Drive

South Pittsburg, TN 37380

Procedure: Heat Part A with agitation to 60°C. Separately heat Part B to 60°C. Homogenize Part B into Part A for a sufficient time to ensure good emulsification. Stir, cool to 45°C, add fragrance, and package.

Procedure: Heat Part A with agitation to 60°C, add Part B, continue mixing. Separately heat Part C to 60°C. Homogenize C into Part A for a sufficient time to ensure good emulsification. Stir, cool to 45°C, add fragrance, and package.

Ph: 423-837-8800

Fax: 423-837-3888

Part B Titanium Dioxide

% by Weight 0.5

Part C Cetyl Alcohol Myristyl Myristate Isopropyl Palmitate Dimethicone (100cS) Lanolin Alcohol Total

% by Weight 2.0 3.0 4.0 1.0 0.5 100.0

LAST UPDATED 08/09/2006

WARRANTY Colonial Chemical guarantees that its products meet published specifications. No other warranties or guarantees are expressed or implied because the use of this material is beyond the control of Colonial Chemical.

Colonial Chemical, Inc. www.colonialchem.com 225 Colonial Drive South Pittsburg, TN 37380

225 Colonial Drive

South Pittsburg, TN 37380

Ph: 423-837-8800 Fax: 423-837-3888

Ph: 423-837-8800

Fax: 423-837-3888

Related Documents

Colafax Cpe
April 2020 17
Colafax Cpe
April 2020 12
Colafax Cpe-k
May 2020 8
Cpe
November 2019 18