Ccna 3new Version B

  • November 2019
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Ccna 3new Version B as PDF for free.

More details

  • Words: 2,550
  • Pages: 14
In which VTP mode can a switch create VLANs, ignore VTP messages, and not pass local VLAN information to other VTP domain members? • client • server • pruning • transparent What are two characteristics of an extended ACL? (Choose two.) • IP is used to specify TCP traffic only. • IP is used to specify TCP and UDP traffic only. • IP is used to specify all TCP/IP protocols including TCP, UDP, ICMP and routing protocols. • Traffic can be filtered on source address only. • Traffic can be filtered on source and destination address only. • Traffic can be filtered on source and destination address, protocol, and specific port number. Which two statements are true regarding a PPP connection between two Cisco routers? (Choose two.) • LCP tests the quality of the link. • LCP manages compression on the link • Only a single NCP is allowed between the two routers. • NCP terminates the link when data exchange is complete. • With CHAP authentication, the routers exchange plain text passwords. Assuming VLSM is not being used, what impact will adding the command ip route 172.16.64.0 255.255.240.0 serial0/0 have on a router that is already operational in a network? • All packets with a destination address between 172.16.64.1 and 172.16.80.254 will be forwarded out serial0/0. • All packets with a destination address between 172.16.64.1 and 172.16.255.254 will be forwarded out serial0/0. • All packets with a destination address between 172.16.64.1 and 172.16.79.254 will be forwarded out serial0/0. • All packets with a destination address between 172.16.0.1 and 172.16.64.254 will be forwarded out serial0/0.

Refer to the exhibit. The network is using OSPF as the routing protocol. A network administrator issues the show ip ospf neighbor command to check the status of operation. Which statement is true? • RB has the lowest priority value. • RC and RD have the lowest router IDs on the network. • RA has established adjacencies with all neighbor routers. • RA and RB cannot form an adjacency because they are stuck in the 2-way state. A sales representative is preparing to send sensitive information to corporate headquarters from a hotel room using the Internet. Prior to the trip, the IT staff made the necessary provisions to allow secure Internet access. What solution was implemented for the sales representative? • VPN • Frame Relay • PPP with CHAP authentication • PPP with PAP authentication

Refer to the exhibit. A network administrator noticed that the VLAN configuration changes at SW2 did not propagate to SW3. On the basis of the partial output of the show vtp status command, what is the possible cause of the problem? • VTP V2 mode is disabled. • SW3 is configured as transparent mode. • The number of existing VLANs does not match. • The configuration revision number does not match.

Refer to the exhibit. Because of continuing instability of one of the serial links in the OSPF network, a network administrator configures router ASBR as shown. Which two statements will be a result of this configuration? (Choose two.) • Traffic intended for destinations across unstable serial links will be forwarded by ASBR even when the links are down • A summary route of 192.168.0.0/22 will be advertised to the ISP router. • Serial links in range 192.168.0.0 255.255.252.0 will be forced into a passive state. • Networks connected to the unstable serial links will be placed in an unreachable state. • Negative effects of route flapping will be reduced.

What is the term for the value 2172416 that is highlighted in the output of the show ip eigrp topology command? • feasible distance of the successor • reported distance of the successor • feasible distance of the feasible successor • reported distance of the feasible successor

A redundant switched topology is being installed in an enterprise. Which of the following should be configured to ensure that this network operates efficiently? TTL STP BID BPDU ARP Users are complaining that resources housed on a remote network have become unavailable. Which command can the administrator use to check whether this destination network is known to the local router? router# show ip route router# show route router# show ip rip router# show rip router# show protocol How can MAC address table entries be removed from a switch? (Choose two.) Power cycle the switch to clear all dynamically learned addresses.√ The clear switching-tables command will remove statically configured entries. The clear mac-address-table command will remove statically and dynamically configured table entries. The erase flash command will clear all statically configured table entries. Statically configured MAC addresses will automatically be removed from the address table 300 minutes after the last activity on a switch port. Which of the following are performed by a switch port that is in the forwarding state in an STP network? (Choose three.) • discarding data traffic • receiving data traffic • forwarding data traffic • recalculating BPDUs • receiving BPDUs • blocking BPDUs Which of the following statements about link-state advertisements are correct? (Choose three.) • LSAs are sent to neighboring routers on a regular basis. • LSAs are used by a router to determine if a neighboring router is online. • LSAs are multicast to all routers in the area.

• LSAs contain the topological database of the sending router. • Routers use LSAs to learn about the topology of the entire network. • LSAs are sent when the router detects a topology change.

Refer to the exhibit. A network administrator wishes to deny Internet access to all R2 LAN hosts, while allowing these hosts to reach all other devices on the company networks. Where the ACL shown in the exhibit should be placed to meet these requirements? • R2: Fa0/0 inbound • R1: S0/1/0 outbound • R1: S0/0/1 inbound • R2: S0/0/1 outbound • R2: Fa0/0 outbound

Refer to the exhibit. In what sequence (from first to last) does an OSPF router check the parameters listed when selecting the DR? • C, B, A, D • D, C, B, A • A, B, C, D • A, C, B, D • B, C, A, D

Refer to the exhibit. Assuming that all three routers are configured with the EIGRP routing protocol and sharing information, what information can be gathered from the show command output? • Router B has EIGRP adjacencies with both router A and C. • Router B has a fully converged topology table. • Router B has not formed an adjacency with router A. • Router B has not formed an adjacency with router C.

Refer to the exhibit. A network support technician has been asked to set an IP address on one of the FastEthernet interfaces on a new router. What is causing the interface to reject the address? • The IP address is already in use. • The technician is using a network address. • The technician is using the wrong subnet mask for /26 • The technician must enable VLSM on the interface.

Refer to the exhibit. A network administrator enters the command ip route 10.10.4.16 255.255.255.248 s0/0/1 into the router. What will be the result of this configuration? • A static route pointing to 10.10.4.16/29 is placed into the routing table. • A static route to 10.10.4.16/29 is placed into the routing table if interface FastEthernet0/1 goes down. • A static route pointing to 10.10.4.16/29 is only placed into the routing table if the route to 10.10.4.0 is removed. • A static route is not placed into the routing table because a RIP route that includes the destination network already exists.

Which type of address does OSPF use to initiate new adjacencies and to ensure that neighbor routers are functioning? • broadcast • loopback • multicast • unicast

Which LAN design requirement addresses user-to user and user-to-application connectivity? • adaptability • manageability • scalability • functionality

What affects network availability? (Choose three.) location • throughput • user proficiency • response time • workstation speed • access to resources

Refer to the exhibit. If router RTA fails, which statement is true? • Hosts A and B can reach each other, but cannot reach hosts C and D or the server. • No host can reach any other host. • Hosts A, B, C, and D can reach each other, but cannot reach the server. • All hosts can reach each other. Which command should a network administrator issue to disable default summarization in an EIGRP network? • Router(config-router)# null 0 route • Router(config-if)# no ip summary-address • Router(config-router)# no ip summary-address • Router(config-if)# no auto-summary • Router(config-router)# no auto-summary

Refer to the exhibit. Users on the 172.30.20.0/24 network are unable to access any of the servers located on the 192.168.0.0/23 network. Given the network topology and OSPF configuration, what two problems exist in this network? (Choose two.) • There is a routing loop occurring between all three routers. • There is a network statement missing. • Network 172.30.20.0 has an incorrect wildcard mask. • The OSPF Area configuration is incorrect. • /23 is an invalid subnet mask for the 192.168.0.0 network.

Refer to the exhibit. Which IP addressing scheme would be correct for the network? • H1-172.18.0.10/16 H2-172.18.0.11/16 H3-172.18.0.12/16 • H1-172.18.0.10/16 H2-172.19.0.10/16 H3-172.18.0.11/16 • H1-172.18.0.10/16 H2-172.18.0.11/16 H3-172.19.0.11/16 • H1-172.18.0.10/16 H2-172.19.0.11/16 H3-172.19.0.11/16

Refer to the exhibit. An administrator is adding a new router to the network. The IP address 192.168.13.6/30 has been assigned to the connecting serial interface on R2. What IP address must the administrator assign to the serial interface of the new router? • 192.168.13.4/30 • 192.168.13.5/30 • 192.168.13.7/30 • 192.168.13.58/30 • 192.168.13.61/27 • 192.168.13.63/27 A sales representative is using a wireless connection to make a VoIP call. Which protocol will be used to transport the voice packets? • TCP

• UDP • PPP • HDLC

Refer to the exhibit. Assuming that the RIPv1 routing protocol is enabled and that all networks are being advertised, which statement is true? • All packets from H1 that are destined to H2 will arrive at H2. • None of the packets from H1 that are destined to H2 will arrive at H2. • Approximately half the traffic from H1 that is destined to H2 will reach R3. • Some of the packets from H1 that are destined to H2 will be sent to the switch that is connected to network 192.168.3.64/26.

Refer to the exhibit. Which route will appear in the routing table? • R 10.10.4.0/24 [120/1] via 10.10.10.1, 00:00:12, FastEthernet0/1 • R 10.10.4.0/24 [120/1] via 10.10.20.1, 00:00:12, FastEthernet0/0 • R 10.10.4.0/24 [120/2] via 10.10.20.1, 00:00:12, FastEthernet0/0 • R 10.10.4.0/24 [120/3] via 10.10.30.1, 00:00:12, FastEthernet1/0 • R 10.10.4.0/24 [120/1] via 10.10.30.1, 00:00:12, FastEthernet1/0

Refer to the exhibit. Server7 has been added to the server farm network. The hosts can ping Servers 2 and 3 and Server2 and Server3 can ping each other. Server7 cannot ping the other servers connected to the switch. What is the cause of this problem? • The Fa0/1 port on the switch should be in access mode. • The switch IP address is not on the same subnet as Server7. • The switch port used for Server7 is not in the same VLAN as Server2 and Server3. • The Fa0/0 interface of the router has not been configured for subinterfaces to support inter-VLAN routing.

Refer to the exhibit. A network administrator must manually summarize all IP addresses on the POP router for the ISP. Which one is the correct summary address? • 192.168.0.0/22 • 192.168.0.0/23 • 192.168.0.0/24 • 192.168.0.0/25

Refer to the exhibit. What two pieces of information can be gathered from the output of this command? (Choose two.) • 172.16.16.0/20 is a manually summarized route. • All subnets are being advertised because default summarization was disabled. • The output verifies that EIGRP is advertising only the networks in the same AS. • The 172.16.1.0/24 network is directly attached to the router that produced this output. • The Null0 interface indicates that this is not an actual path, but a summary for advertising purposes.

Refer to the exhibit. What three facts represent the result of DR and BDR elections in this OSPF network? (Choose three.) • RTC will be the DR of 10.5.0.0/30 • RTD will be the BDR of 10.5.0.0/30. • RTD will be the DR of 10.4.0.0/28.

• RTB will be the BDR of 10.7.0.0/28. • RTB will be the DR of 10.7.0.0/28. • RTA will be the BDR of 10.4.0.0/28.

Refer to the exhibit. Internet access is crucial for the company network shown. Internet access is provided by two ISPs. ISP1 is the primary provider and ISP2 is the backup provider. The network administrator configures BorderR as the border router so that in normal operations, all Internet traffic goes through ISP1. However, if the link to ISP1 fails, then BorderR will automatically forward Internet traffic to ISP2. The administrator configures two default routes: BorderR(config)# ip route 0.0.0.0 0.0.0.0 192.168.100.1 200 BorderR(config)# ip route 0.0.0.0 0.0.0.0 172.16.1.1 However, when the administrator issued the show ip route command to verify the configuration, only the second default route is in the routing table. Why is the first default route not showing? • The first configuration command overwrites the second command. • The first default route will be installed into the routing table if there is traffic with an IP address that is destined for the 192.168.100.0 network. • This is expected because the link to ISP1 is active. If the link to ISP1 goes down, then the first default route will be installed into the routing table. • The first default route cannot be installed into the routing table unless the administrator manually disables the second default route with the no ip route 0.0.0.0 0.0.0.0 172.16.1.1 command.

Refer to the exhibit. All routes in the exhibit are available to a router. Which two routes will be placed into the routing table? (Choose two.) •A •B •C •D •E •F

Refer to the exhibit. What is the purpose of the command: RouterA(config)# access-list 1 permit 192.168.16.0 0.0.0.255? • It identifies traffic on all inside interfaces to be translated and given access to the ISP router. • It identifies traffic from the fa0/1 interface to be translated and given access to the ISP router. • It allows traffic from the ISP to reach all of the inside interfaces. • It identifies traffic from the fa0/0 interface to be translated and given access to the ISP router • It allows traffic from the ISP router to the fa0/1 interface.

Refer to the exhibit. What is represented by the Null0 route for the 128.107.0.0 network? • a child route that is defined • a parent route that is defined and sourced from a physical interface • a summary route for advertising purposes, not an actual path • the result of the no auto-summary command on a router

If an authentication protocol is configured for PPP operation, when is the client or user workstation authenticated?

• prior to link establishment • during the link establishment phase • before the network layer protocol configuration begins • after the network layer protocol configuration has ended

เ ขี ย น โ ด ย C u E i H z O ท ่ี 5 : 5 9 P M : W e d n e s d a y, O c t o b e r 2 2 ,

Related Documents

Ccna 3new Version B
November 2019 11
Hongyin (version B)
October 2019 32
Lady B Black Version
April 2020 7
Final Version, Combo B
December 2019 25
Hongyin Ii (version B)
October 2019 21