Cataloge 2008_2009 Without Price, English

S O L A R T E C H N I K

o t g n i Turn the sun Energy of the future

Contents

S O L A R T E C H N I K

Our corporate philosophy....................................................................................

3

Directions/Map ...............................................................................................................

4

GEO-TEC in Spittal........................................................................................................

5

High-Grade Steel Frame Collectors ............................................................

6-14

Aluminium Frame Collectors .............................................................................

15-22

Wood Frame Collectors ...........................................................................................

23-25

Solar Stations ..................................................................................................................

26-29

Accessories .........................................................................................................................

30-35

Solar Control Modules .............................................................................................

36-39

Storage Units, Buffers & Accessories ......................................................

40-50

Storage Units and Heat Exchangers .........................................................

51-52

Plate-type Heat Exchangers ..............................................................................

53

Tubing & Insulating Systems ..........................................................................

54-56

Stoves .......................................................................................................................................

58-61

Trade Fair and Promotional Items ...............................................................

62

Solar Set ................................................................................................................................

63

General Terms and Conditions of Business ........................................

64-66

Solar Collector Systems .........................................................................................

67

Trade Fair IHS 2007 ...................................................................................................

68-69

Tinox Absorbers .............................................................................................................

70-71

S O L A R T E C H N I K

2

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Our corporate philosophy

S O L A R T E C H N I K

GEO-TEC Solartechnik GmbH is a producer of highquality solar collectors. Our endeavour is to create a basis of trust with our customers and to assist in solving their problems. This is guaranteed by great development competence, creativity and flexibility.

Satisfied customers are a concern for us. Our task is to deal with customer orders with the utmost of care. Through accommodating customer service and by supplying high-quality products, our aim is to enter a long-term and productive partnership with our customers.

Precise target specifications are applied to improve the quality of our products and services such that positive changes can be continuously compared and measured. As a result, continuous quality improvements and very good competitiveness are produced. All suggestions and recommendations are taken very seriously and checked for their feasibility.

Due to our products, the issue of sustainability is always present. Very conscious of our ecological responsibility to our following generations, in all of our business segments we make an effort to contribute toward going easy on our resources in a sustainable fashion.

Subject to setting and printing errors. Prices do not include VAT.

3

Directions/Map

S O L A R T E C H N I K

Directions for finding us: GEO-TEC Solartechnik GmbH Villacher Straße 95 A-9800 Spittal an der Drau Coming by car: Autobahn A 10 (Tauern autobahn) - exit Spittal EAST (OST) Take the first exit on the right onto the B B100 ("Drautal-Bundesstrasse"). At the two roundabouts (the 2nd exit) after the 1st traffic light on Villacher street, you will find our company GEO-TEC past the 1st traffic light on Villacher Street.

München

Salzburg

S O L A R T E C H N I K

Spittal/ Drau

Villach

4

S O L A R T E C H N I K

S O L A R T E C H N I K

High-rise rack warehouse

Storage space 5

High-Grade Steel Frame Collectors

S O L A R T E C H N I K

GSE 2000/TIN H/TIN Q A collector without covering frame for in-roof, (only GSE 2000/ TIN H) roof-mounted, and flat-roof installation. ◆ Customised concatenation is possible (in parallel and in series) ◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing ◆

GSE2000/TIN H ◆ GEO-TEC high-performance collector, high-grade steel, „vertical“ ◆ Up to ten collectors can be combined as a collector field. GSE2000/TIN Q ◆ GEO-TEC high-performance collector, high-grade steel, „horizontal“ ◆ Up to five collectors can be combined as a collector field. Frame

Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification Verification

Roll-formed high-grade steel profile Edge guard around the perimeter Ventilation through specially designed riveting nuts Clear TSG solar glass Glued without frame Aluminium, 0.6 mm Tinox, ultrasonic sealed Manifold, 22 mm Harp-shaped absorber pipes, 12/25 Stk. @ Ø 6 mm Back panel: 40 mm rock wool Sides: 10 mm rock wool 3/4" outside thread, 3/4" coupling ring •In-roof design •Roof-mounted, parallel to roof (hanger bolts and/or roof bracket, fold clamp) •Roof-mounted, raised •Flat roof, standing Length: 1985 mm Width: 985 mm Height: 77 mm 1,985 x 0,985 = 1,96 m2 1,955 x 0,955 = 1,87 m2 1 litre 96 % 81 % 36 kg Rapperswil C572 Solar Keymark (on order!)

Article number 500100 500101

Article ID GSE2000/TIN H vertical-format collector GSE2000/TIN Q horizontal-format collector

Glass Back panel Absorber

Insulation Connections Assembly

Dimensions

6

PU 1 pallet 12 pcs 1 pallet 12 pcs

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

High-Grade Steel Frame Collectors

S O L A R T E C H N I K

GSE 2.0/TIN H A collector without covering frame for roof-mounted, and flat-roof installation. ◆ Customised concatenation is possible (in parallel and in series) ◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing ◆

GSE2.0/TIN H ◆ GEO-TEC high-performance collector, high-grade steel, „vertical“ ◆ Up to ten collectors can be combined as a collector field.

Frame

Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification Verification

Roll-formed high-grade steel profile Edge guard around the perimeter Ventilation through specially designed riveting nuts Clear TSG solar glass Glued without frame Aluminium, 0.6 mm Tinox, ultrasonic sealed Manifold, 22 mm Harp-shaped absorber pipes, 13 Stk. @ Ø 6 mm Back panel: 40 mm rock wool Sides: 10 mm rock wool 3/4" outside thread, 3/4" coupling ring •Roof-mounted, parallel to roof (hanger bolts and/or roof bracket, fold clamp) or roof brackets, fold clamp) •Roof-mounted, raised •Flat roof, Standing Length: 2030 mm Width: 1030 mm Height: 77 mm 2,1 m2 2,00 m2 1 litre 96 % 81 % 37 kg Rapperswil C572 Solar Keymark (on order!)

Article number 500110

Article ID GSE2.0 TIN/H vertical-format collector

Glass Back panel Absorber

Insulation Connections Assembly

Dimensions

Subject to setting and printing errors. Prices do not include VAT.

PU 1 pallet 12 pcs 7

Edelstahlrahmenkollektoren

S O L A R T E C H N I K

GSE 2400/ TIN H/TIN Q A collector without covering frame for in-roof, (only GSE 2400/ TIN H) roof-mounted, and flat-roof installation. ◆ Customised concatenation is possible (in parallel and in series) ◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing ◆

GSE2400/TIN H ◆ GEO-TEC high-performance collector, high-grade steel, vertical ◆ Up to ten collectors can be combined as a collector field. GSE2400/TIN Q ◆ GEO-TEC high-performance collector, high-grade steel, horizontal ◆ Up to four collectors can be combined as a collector field. Frame

Glass Back panel Absorber

Insulation Connections Assembly

Dimensions

Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification Verification Article number 500400 500600 8

Roll-formed high-grade steel profile Edge guard around the perimeter Ventilation through specially designed riveting nuts Clear TSG solar glass Glued without frame Aluminium, 0.6 mm Tinox, ultrasonic sealed Manifold, 22 mm Harp-shaped absorber pipes, 12/31 Stk. @ Ø 6 mm Back panel: 40 mm rock wool Sides: 10 mm rock wool 3/4" outside thread, 3/4" coupling ring •In-roof design •Roof-mounted, parallel to roof (hanger bolts and/or roof bracket, fold clamp) or roof brackets, fold clamp) •Roof-mounted, raised •Flat roof, Standing Length: 2410 mm Width: 985 mm Height: 77 mm 2.410 x 0.985 = 2.38 m2 2.380 x 0.955 = 2.273 m2 1.2 litre 96 % 81 % 44 kg Rapperswil C572 Solar Keymark (on order!) Article ID GSE2400/TIN Hvertical-format collector GSE2400/TIN Q horizontal-format collector

PU 1 pallet 12 pcs 1 pallet 12 pcs

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

High-Grade Steel Frame Collectors

S O L A R T E C H N I K

GSE 2000/ TIN SLIM A collector without covering frame for roof-mounted and flat-roof installation ◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing ◆

GSE 2000/TIN SLIM ◆ GEO-TEC high-performance collector, high-grade steel, horizontal ◆ Up to five collectors can be combined as a collector field.

Frame

Glass Back panel Absorber

Insulation Connections Assembly

Dimensions

Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification

Article number 500200

Roll-formed high-grade steel profile Edge guard around the perimeter Ventilation through specially designed riveting nuts Clear TSG solar glass Glued without frame Aluminium, 0.6 mm Tinox, ultrasonic sealed Manifold, 22 mm Harp-shaped absorber pipe, 6 mm Back panel: 40 mm rock wool Sides: 10 mm rock wool 3/4" outside thread, 3/4" coupling ring •Roof-mounted and parallel to roof (with hanger bolts or roof brackets, fold clamp) •Roof-mounted, raised Length 1985 mm Width: 385 mm Height: 77 mm 0.764 m2 0.691 m2 0.4 litre 96 % 75 % 16 kg Rapperswil C645

Article ID GSE2000/TIN SLIM vertical-format collector

Subject to setting and printing errors. Prices do not include VAT.

PU 1 pallet 24 pcs

9

High-Grade Steel Frame Collector

S O L A R T E C H N I K

Connecting Materials Connection Set, left/right All parts made of brass, sensor immersion sleeve soldered in, incl. high-temperature seals, design for left or right solar forward flow. All sealing points are flat-sealing. 3/4" connections Consists of: ◆ Corner sleeve (3/4" coupling ring/ 3/4" outside thread, flat-sealing) ◆ Sensor right-angle connection (3/4" coupling ring/ 3/4" outside thread, ◆ Sensor immersion sleeve Ø 6.2 mm) ◆ Plug (3/4" outside thread, flat-sealing) ◆ End cap (3/4" internal thread , flat-sealing ) Article number Sets: 11000100 11000200 Individual parts: 11000001 11000006 11000021 11000022 11000003 11000004 11000005 510305

Description Connection set for solar forward flow, left Connection set for solar forward flow, right Right-angle connector, universal Right-angle connector, universal, with coupling nut Right-angle connector, right, with sensor immersion sleeve Right-angle connector, left, with sensor immersion sleeve End cap End plug High-temperature seal 3/4", 24 x 17 x 1.5 mm Sealing plates

Connection Hose Set Consists of: ◆ High-grade steel corrugated tube DN 16, 1000 mm, 2x 3/4" Rubber insulation 13 mm ◆ High-grade steel corrugated tube DN 16, 1000 mm, 2x 3/4" Rubber insulation 13, with sensor cable drawn in, PT1000 (silicon) 1500 mm ◆ 1 double nipple 3/4" flat-sealing ◆ 4 high-temperature solar seals Transition to high-grade steel corrugated tube or copper tube by means of Easy-Drill screwed connection (see delivery programme, tube and insulating systems). Plastic-packed as set, suitable for indoors and outdoors Article number 11001000 10

Article ID Connection Hose Set

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

High-Grade Steel Frame Collectors

S O L A R T E C H N I K

Installation Materials HANGER BOLT System ◆ ◆

◆ ◆ ◆ ◆

High-grade steel Completely pre-assembled for installation of the aluminium T-profile with or without connecting profile Length : 350 mm, Ø 12 mm Aluminium clamp EPDM tile sealing rubber Stainless steel nuts and shims

CONNECTING RAIL VL H ◆ ◆ ◆ ◆ ◆

Aluminium connecting rail for stabilising T-profiles 2163 mm for GSE 2000 H and GSE 2.0, 2588 mm for GSE 2400 H For fast mounting of flat collectors vertical For roof bracket installation One connecting rail is required per collector

ROOF BRACKET System Aluminium base, 180 mm, 50/40/10 mm perforated ◆ Aluminium bracket for mounting the aluminium T-profile with connecting profile ◆ Complete with stainless steel connecting bolts and aluminium clamp-type holder ◆

T-profile for mounting highgrade steel frame collectors with vertical or horizontal format Bare aluminium , in fixed lengths Slotted , 50 mm ◆ Corrugated gripping side ◆ 50 x 50 x 5 mm ◆ ◆

VLQ ◆ ◆ ◆ ◆ ◆

Aluminium connecting rail for stabilising T-profiles 1163 mm for GSE 2000Q and GSE 2400 Q For fast mounting of flat collectors, horizontal For roof bracket installation Two connecting rails are required per collector.

Article number 77000201 77000101 77082301 77082302 77082305 520702 520703 520710 520701 520730 520740 520731 520732

Collectors Roof bracket complete, preassembled Hanger bolt, complete, pre-assembled Connecting rail, vertical Connecting rail, horizontal Connecting rail for GSE 2400 H T-PROFILE for 2 vertical T-PROFILE for 3 vertical T-PROFILE for 6 vertical T-profile for 1, horizontal T-profile for 2, horizontal T-profile for 3, horizontal T-profile for 1 horizontal GSE 2400 T-profile for 2 horizontal GSE 2400

Subject to setting and printing errors. Prices do not include VAT.

Dimensions

2034 mm 3051 mm 6102 mm 2018 mm 4036 mm 6054 mm 2442 mm 4884 mm

11

High-Grade Steel Frame Collectors

S O L A R T E C H N I K

Installation Materials KV 2 Clamp Connector Set Clamp Connector Set for connecting aluminium T-profiles and FDRA ◆ 70 mm wide ◆ 2 drilled holes 12.5 mm ◆ With stainless steel bolts, nuts and shims ◆

Fold clamp Bare aluminium ◆ 125 mm ◆

Hanger bolt / flange plate High-grade steel ◆ Completely preassembled with flange and seal ◆ Length : 350 mm, Ø 12 mm ◆

Article number 77000302 77099503 77000200

Collectors Clamp Connector Set (2 units) Fold clamp Hanger bolt/flange plate

METAL CLADDING SET (basic set & extended set) for vertical-format collectors GSE 2000H and GSE 2400H Aluminium, "prefa brown" Packed in cardboard box with installation instructions Suitable for roofs with an incline of at least 30° Only for GSE 2000H and GSE 2400H Basic set for two collectors each Extension set for every additional collector

◆ ◆ ◆ ◆ ◆ ◆

Article number 520500 520510

Description Basic set GSE 2000H Extension set GSE 2000H

Dimensions 200/350/2030 200/350/2030

Weight 9 kg 3 kg

520520 520530

Basic set GSE 2400H Extension set GSE 2400H

200/350/2500 200/350/2500

10 kg 4 kg

12

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

High-Grade Steel Frame Collectors

S O L A R T E C H N I K

Installation Materials Flachdachfreirahmenaufstellung ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆

For flat roofs, industrial buildings, etc. For mounting on concrete base or I-beams The substructure, fastening and bracing have to be provided by the customer. Statics-tested support structure Consists of aluminium angle profiles, 40/40/4mm, bare T-profiles are already included With stainless steel bolts and assembly instructions Partially pre-assembled Plastic-packed and labelled Sets for multiple collectors

Sets for various support structure variations: ◆ ◆ ◆ ◆ ◆

2, 3 or 6 GSE 2000H 45° 2, 3 or 6 GSE 2000H 60° 2, 3 or 6 GSE 2400H 45° 2, 3 or 6 GSE 2400H 60° 1, 2 or 3 GSE 2000Q 45° Article number 520410 520420 520432

Description FDFRA for 2 GSE 2000H 45° FDFRA for 3 GSE 2000H 45° FDFRA for 6 GSE 2000H 45°

Dimensions 2200/100/150 mm 3200/200/150 mm 6200/200/150 mm

Weight 15 kg 20 kg 40 kg

520460 520480 520470

FDFRA for 2 GSE 2000H 60° FDFRA for 3 GSE 2000H 60° FDFRA for 6 GSE 2000H 60°

2200/200/150 mm 3200/200/150 mm 6200/200/150 mm

15 kg 20 kg 40 kg

520440 520450 520900

FDFRA for 2 GSE 2400H 45° FDFRA for 3 GSE 2400H 45° FDFRA for 6 GSE 2400H 45°

2500/100/150 mm 3200/200/150 mm 6200/200/150 mm

17 kg 22 kg 44 kg

520200 520201 520210

FDFRA for 2 GSE 2400H 60° FDFRA for 3 GSE 2400H 60° FDFRA for 6 GSE 2400H 60°

2500/200/150 mm 3200/200/150 mm 6200/200/150 mm

17 kg 22 kg 44 kg

520430 520411 520400

FDFRA for 1 GSE 2000Q 45° FDFRA for 2 GSE 2000Q 45° FDFRA for 3 GSE 2000Q 45°

2200/200/150 mm 4400/200/150 mm 6200/200/150 mm

12 kg 24 kg 36 kg

520490 FDFRA for 1 GSE „SLIM“ 45° 450/200/150 mm 9 kg 520495 FDFRA for 1 GSE 2400Q 45° 2450/200/150 mm 24 kg 520496 FDFRA for 2 GSE 2400Q 45° 4900/200/150 mm 48 kg Note: For four collectors, be sure to use two double-unit sets + one KV 2 connection set. For five collectors, use one double-unit set and one triple-unit set + one KV 2 connection set.

Subject to setting and printing errors. Prices do not include VAT.

13

High-Grade Steel Frame Collectors

S O L A R T E C H N I K

Installation Materials 20° Inclination Can be used for each collector for hanger bolt and roof bracket ◆ Bare aluminium, including high-grade steel bolts and brackets ◆

Note: In the 20° INCLINATION no T-profile, no connecting rail, no roof bracket and no hanger bolt are included!

Article number 77000401 520302 77000404

Description 20° Inclination for GSE 2000H 20° Inclination for GSE 2400H 20° Inclination for GSE 2000Q and GSE 2400Q

PU per collector per collector per collector

Concrete ballast Concrete ballast for the fastening of the substructure for collectors (free-standing rooftop frame installation) ◆ Weight per concrete base: 180 kg or 120 kg ◆

Article number 77035500 77035501 14

Description Concrete ballast 180x26x16 per 0,18 tons Concrete ballast 110x26x16 per 0,12 tons

Type vertical horizontal

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Aluminium Frame Collectors

S O L A R T E C H N I K

ALU 2000 H/Q/US A collector suitable for in-roof), modular collector field, roof-mounted and flat-roof installation. ◆ Concatenation can be done serially or in parallel fashion. ◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing ◆

ALU 2000 H/US ◆ GEO-TEC high-performance collector vertical ◆ Up to 10 collectors can be connected in parallel fashion. ALU 2000 Q/US ◆ GEO-TEC high-performance collector, horizontal format ◆ Up to 5 collectors can be connected in parallel fashion.

Frame

Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification Verification

Aluminium extruded profile, only one connection on the underside, complete frame bare made of one bent piece of frame profile with vents, high-temperature-resistant junction seal TSG solar glass with high-temperatureresistant seal pressed with aluminium profile Aluminium/stucco Tinox, ultrasonic sealed Manifold, 22 mm Harp-shaped absorber pipe, 10/20 pcs @ Ø 8 mm Back panel: 40 mm rock wool 3/4" outside thread, 3/4" coupling ring •In-roof design •Roof-mounted, parallel to roof (hanger bolts or roof brackets, fold clamp) •Roof-mounted, raised •Flat roof, Standing Length: 2045 mm Width: 1045 mm Height: 76 mm 2.045 m x 1.045 m = 2.144 m2 2.000 m x 1.000 m = 2.00 m2 1 litre 93.75 % 80% 37 kg Arsenal Research; No. 2.04.00201.1.0 Solar Keymark (on order!)

Article number 77002002 77003002

Article ID ALU 2000 H/US Vertical-Format Collector ALU 2000 Q/US Horizontal-Format Collector

Glass Back panel Absorber

Insulation Connections Assembly

Dimensions

Subject to setting and printing errors. Prices do not include VAT.

PU 1 pallet 12 pcs 1 pallet 12 pcs 15

Aluminium Frame Collectors

S O L A R T E C H N I K

ALU 2000 H/Q A collector suitable for in-roof, modular collector field, roof-mounted and flat-roof installation. ◆ Concatenation can be done serially or in parallel fashion. ◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing ◆

ALU 2000 H ◆ GEO-TEC high-performance collector, vertical ◆ Up to 10 collectors can be connected in parallel fashion. ALU 2000 Q GEO-TEC high-performance collector, horizontal format Up to 5 collectors can be connected in parallel fashion.

◆ ◆

Frame

Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification Verification

Extruded aluminium profiles Only one connection on the lower side Complete frame bent from piece anodised Frame profile with vents, high-temperatureresistant junction seal TSG solar glass with high-temperature-resistant seal pressed with aluminium profile Aluminium/stucco Tinox, soldered Manifold, 22 mm Harp-shaped absorber pipe, 10/20 pcs @ Ø 8 mm Back panel: 40 mm rock wool 3/4" outside thread, 3/4" coupling ring •In-roof design •Roof-mounted, parallel to roof (hanger bolts and/or roof bracket, fold clamp) •Roof-mounted, raised •Flat roof, Standing Length: 2045 mm Width: 1045 mm Height: 76 mm 2.045 m x 1.045 m = 2.144 m2 2.003 m x 1.000 m = 2.00 m2 1 litre 93.75 % 80% 37 kg Arsenal Research; No. 2.04.00201.1.0 Solar Keymark (on order!)

Article number 77002000 77003000

Article ID ALU 2000 Vertical-Format Collector ALU 2000 Horizontal-Format Collector

Glass Back panel Absorber

Insulation Connections Assembly

Dimensions

16

PU 1 pallet 12 pcs 1 pallet 12 pcs

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Aluminium Frame Collectors

S O L A R T E C H N I K

ALU 450 Q A collector suitable for installation both roof-mounted and parallel to roof. Concatenation can be done serially or in parallel fashion. ◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing ◆ ◆

ALU 450 Q ◆ GEO-TEC high-performance collector, horizontal format ◆ Up to 5 collectors can be connected in parallel fashion.

Frame

Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification

Extruded aluminium profiles Only one connection on the lower side Complete frame bent from piece anodised Frame profile with vents High-temperature-resistant junction seals TSG solar glass with high-temperature-resistant seal pressed with aluminium profile Aluminium/stucco Tinox, soldered Harp-shaped absorber pipe, 20 pcs @ Ø 8 mm Back panel: 40 mm rock wool 3/4" outside thread, 3/4" coupling ring •Installed in roof-mounted fashion or parallel to roof (hanger-bolt and roof-bracket installation) •Roof-mounted, raised •Flat roof, standing Length: 2045 mm Width: 450 mm Height: 76 mm 2.045 m x 0.450 m = 0.921 m2 2.000 m x 0.405 m = 0.810 m2 0.6 litre 93.75 % 80% 17 kg Solar Keymark (on order!)

Article number 77000450

Article ID horizontal-format collector

Glass Back panel Absorber Insulation Connections Assembly

Dimensions

Subject to setting and printing errors. Prices do not include VAT.

PU 1 pallet 24 pcs 17

Aluminium Frame Collectors

S O L A R T E C H N I K

Connecting materials Connection Set, left/right All parts made of brass, sensor immersion sleeve soldered in, incl. high-temperature seals, design for left or right solar forward flow. All sealing points are flat-sealing. 3/4" connections Consists of: ◆ Right-angle connector (3/4" coupling ring / 3/4" outside thread, flat-sealing) ◆ Sensor right-angle connection (3/4" coupling ring/ 3/4" outside thread, ◆ Sensor immersion sleeve (6.2 mm) ◆ Plug (3/4" outside thread, flat-sealing) ◆ End cap (3/4" internal thread, flat-sealing) Article number Sets: 11000100 11000200 Individual parts: 11000001 11000006 11000021 11000022 11000003 11000004 11000005 510305

Description Connection set for solar forward flow, left Connection set for solar forward flow, right Right-angle connector, universal Right-angle connector, universal, with coupling nut Right-angle connector, right, with sensor immersion sleeve Right-angle connector, left, with sensor immersion sleeve End cap End plug High-temperature seal 3/4”, 24 x 17 x 1,5 mm Sealing plates

Connection Hose Set Consists of: ◆ High-grade steel corrugated tube DN16, 1000 mm, 2x 3/4" coupling ring, Rubber insulation 13 mm ◆ High-grade steel corrugated tube DN16, 1000 mm, 2x 3/4" coupling ring, Rubber insulation 13, with sensor cable drawn in, PT1000 (silicon) 1500 mm ◆ 1 double nipple 3/4" flat-sealing ◆ 4 high-temperature solar seals Transition to high-grade steel corrugated tube or copper tube by means of Easy-Drill screwed connection (see delivery programme, tube and insulating systems). Plastic-packed as set, suitable for indoors and outdoors Article number 11001000 18

Description Connection Hose Set

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Aluminium Frame Collectors

S O L A R T E C H N I K

Installation materials HANGER BOLT System ◆ ◆

◆ ◆ ◆ ◆

High-grade steel Completely pre-assembled for installation of the aluminium T-profile with or without connecting profile Length : 350 mm, Ø 12 mm Aluminium clamp EPDM tile sealing rubber Stainless steel nuts and shims

CONNECTING RAIL VL H Aluminium connecting rail for stabilising T-profiles Length 2163 mm for ALU 2000H and ALU 2000H/US ◆ For fast mounting of flat collectors vertical ◆ For roof bracket installation ◆ One connecting rail is required per collector ◆

ROOF BRACKET System Aluminium base, 180 mm, 50/40/10 mm perforated ◆ Aluminium bracket for mounting the aluminium T-profile with connecting profile ◆ Complete with stainless steel connecting bolts and aluminium clamp-type holder ◆

T-PROFILES FOR MOUNTING aluminium frame collectors with vertical or horizontal format

◆

Bare aluminium , in fixed lengths ◆ Slotted, 50 mm ◆ Corrugated gripping side ◆ 50 x 50 x 5 mm ◆

VL Q ◆ ◆ ◆ ◆ ◆

Aluminium connecting rail as per drawing, bare Length : 1163 mm for ALU 2000H and ALU 2000H/US For fast mounting of flat collectors, horizontal For roof bracket installation Two connecting rails are required per collector.

Article number 77000201 77000101 77082301 77082302 77099407 77099405 77099403 77099406 77099420 77099421

Collectors Roof bracket complete, preassembled Hanger bolt, complete, pre-assembled Connecting rail, vertical Connecting rail, horizontal T-PROFILE for 2, vertical T-PROFILE for 3, vertical T-PROFILE for 6, vertical T-PROFILE for 1, horizontal T-PROFILE for 2, horizontal T-PROFILE for 3, horizontal

Subject to setting and printing errors. Prices do not include VAT.

Dimensions

2162 mm 3243 mm 6486 mm 2081 mm 4162 mm 6243 mm

19

Aluminium Frame Collectors

S O L A R T E C H N I K

Installation materials KV 2 Clamp Connector Set Clamp Connector Set for connecting aluminium T-profiles 70 mm wide 2 drilled holes 12.5 mm With stainless steel bolts, nuts and shims

◆ ◆ ◆ ◆

Fold clamp Bare aluminium 125 mm

◆ ◆

Hanger bolt / flange plate High-grade steel Completely preassembled with Length: 350 mm, Ø 12 mm

◆ ◆ ◆

Article number 77000302 77099503 77000200

Collectors Clamp Connector Set (2 units) Fold clamp Hanger bolt/flange plate

METAL CLADDING SET (basic set & extended set) for vertical-format collector ALU 2000H Aluminium, "prefa brown" Packed in cardboard box with installation instructions Suitable for roofs with an incline of at least 30° Basic set for two collectors each Extension set for every additional collector Metal cladding for horizontal-format collector available "Charcoal" metal cladding available on request

◆ ◆ ◆ ◆ ◆ ◆ ◆

Article number 12801911 12801901 12801916 12801917 12800000 12800002 20

Description Basic Set ALU 2000H Extended set ALU 2000H Basic Set ALU 2000H übereinander Extended set ALU 2000H übereinander Cosmetic cover strip ALU 2000H Cosmetic cover strip ALU 2000Q

Dimensions 200/350/2030 200/350/2030 200/350/2030 200/350/2030

Weight 12,50 kg 6,50 kg 12,50 kg 6,50 kg 2 kg 1,20 kg

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Aluminium Frame Collectors

S O L A R T E C H N I K

Installation materials Flat-roof open-frame set-up ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆

For flat roofs, industrial buildings, etc. For mounting on concrete base or I-beams The substructure, fastening and bracing have to be provided by the customer. Statics-tested support structure Consists of aluminium angle profiles, 40/40/4, bare T-profiles are already included With stainless steel bolts and assembly instructions Partially pre-assembled Plastic-packed and labelled Sets for multiple collectors

Sets for various support structure variations: 2, 3 or 6 ALU 2000H 45° ◆ 2, 3 or 6 ALU 2000H 60° ◆ 1, 2 or 3 ALU 2000Q 45° ◆

Article number 77024501 77034501 77064501

Description FDFRA for 2 ALU 2000H 45° FDFRA for 3 ALU 2000H 45° FDFRA for 6 ALU 2000H 45°

Dimensions 2200/100/150 mm 3200/200/150 mm 6200/200/150 mm

Weight 15 kg 20 kg 40 kg

77026001 77036001 77066001

FDFRA for 2 ALU 2000H 60° FDFRA for 3 ALU 2000H 60° FDFRA for 6 ALU 2000H 60°

2200/200/150 mm 3200/200/150 mm 6200/200/150 mm

15 kg 20 kg 40 kg

77014501 77000304 77001000

FDFRA for 1 ALU 2000Q 45° FDFRA for 2 ALU 2000Q 45° FDFRA for 3 ALU 2000Q 45°

2200/200/150 mm 4400/200/150 mm 6200/200/150 mm

12 kg 24 kg 36 kg

77045001

FDFRA for 1 ALU 450Q 45°

450/200/150 mm

9 kg

Note: For four collectors, be sure to use two double-unit sets + one KV 2 connection set. For five collectors, use one double-unit set and one triple-unit set + one KV 2 connection set.

Subject to setting and printing errors. Prices do not include VAT.

21

Aluminium Frame Collectors

S O L A R T E C H N I K

Installation materials 20° Inclination Can be used for each collector for hanger bolt and roof bracket ◆ Bare aluminium, including high-grade steel bolts and brackets ◆

Note: In the 20° inclination no T-profile, no connecting rail, no roof bracket and no hanger bolt are included!

Article number 77000401 77000404

Description Inclination 20° for ALU 2000H Inclination 20° for ALU 2000Q

PU 1 Set/collector 1 Set/collector

Concrete ballast Concrete ballast for the fastening of the substructure for collectors (freestanding rooftop frame installation) ◆ Weight per concrete base: 180 kg or 120 kg ◆

Article number 77035500 77035501 22

Description Concrete ballast 180x26x16 per 0.18 tons Concrete ballast 110x26x16 per 0.12 tons

Type vertical horizontal

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Wood Frame Collectors

S O L A R T E C H N I K

IK 2000 / TIN H IK 2000 / TIN H The GEO-TEC high-performance collector with wood frame and a collector area of 2.0 m², was designed for in-roof installation and can be easily integrated into the room on the roof battens, without a crane for the installation. A maximum of six modules in a row should concatenated to one another.

Frame Glass Back panel Absorber

Gross surface area Absorber area Collector efficiency Collector volume Weight Verification

Wood TSG solar glass , textured Wood Tinox, soldered Manifold, 22 mm Harp-shaped absorber pipes 10 pcs. @ Ø 8 mm 50 mm rock wool 3/4" outside thread, flat-sealing EPDM rubber profile, UV-resistant Length: 2010 mm Width: 1000 mm Height: 113 mm 2.01 m2 1.79 m2 76 % 1.4 litre 43 kg Arsenal Research; No. 2.04.00110.1.0-1(2)

Article number 77030001

Article ID IK 2000 / TIN H wood frame collector

Insulation Connections Sealing Dimensions

Subject to setting and printing errors. Prices do not include VAT.

PU 1 pallet 12 pcs

23

Wood Frame Collectors

S O L A R T E C H N I K

Installation materials Covering Frame A covering frame for tile or Eternit roofing, made of powder-coated sheet metal; colour: charcoal; from roof inclinations of 30°. The covering frames include the items required to install roof covering. The Basic Set includes: ◆ 1 unit of sheet metal cladding for two collectors ◆ 2 side closing profiles ◆ 1 cover strip ◆ 1 sensor tube extension ◆ 1 copy of Installation Instructions The Basic Set on top of one another includes: ◆ 1 sheet metal cladding for 2 collectors one above the other ◆ 2 side closing profiles ◆ 1 cover strip ◆ 1 copy of Installation Instructions

The Extension Set includes: ◆ ◆

1 sheet metal cladding for one collector 1 cover strip

The Extension Set on top of one another includes:

1 of sheet metal cladding for one collector, on top of one another ◆ 1 cover strip ◆

Article number 77030511 77030521

Description Covering Frame Basic Set, 4 m², tile Covering Frame Extended Set, 2 m², tile

77030516 77030526

Covering Frame Basic Set, 4 m², Eternit Covering Frame Extended Set, 2 m², Eternit

77030841 77030846

Covering Frame Basic Set, on top of one another, 4 m² Covering Frame Extended Set, next to/on top of one another, 2 m²

Collector connectors Corrugated-tube collector connectors: Flat-sealing screwed connection, incl. insulation, for connecting collectors

Collector Terminal Connector For connecting the forward and return flow for a collector field Corrugated tube connection set:

flat-sealing, 3/4" connection, for connection in the attic space

Article number 77032001 77032002 24

Description Corrugated tube collector connector for IK2000 A corrugated tube connection set for IK2000

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Wood Frame Collectors

S O L A R T E C H N I K

Installation materials Planning Chart for Covering Frame Sets (roof inclination from 30°)

C o l l e c to rs p e r row

1x2

1x3

1x4

1x5

1x6

2x2

2x3

2x4

2x5

2x6

1 1

1 2

1 3

1 4

1

1 1 1 1

1 2 1 2

1 3 1 3

1 4 1 4

1 1 1 1

1 2 1 2

1 3 1 3

1 4 1 4

Article number

Description

TILE 77030511 77030521 77030841 77030846

IK2000 G 4 Z IK2000 E 2 Z IK2000 GÜ 4 IK2000 EÜ 2

1

ETERNIT 77030516 77030526 77030841 77030846

IK2000 G 4 E IK2000 E 2 E IK2000 GÜ 4 IK2000 EÜ 2

1

1

1 1

1 2

1 3

1 4

1 1

Planning Chart, Accessories (not included in price) Select the suitable collector connectors and connection sets on the previous page.

C o l l e c to rs p e r row

1x2

1x3

1x4

1x5

1x6

2x2

2x3

2x4

2x5

2x6

1 2

2 2

3 2

4 2

5 2

2 4

4 4

6 4

8 4

10 4

Designation Collector connectors Connection set

Subject to setting and printing errors. Prices do not include VAT.

25

Solar Stations

S O L A R T E C H N I K

Solar Pump Stations without Control Systems SINGLE-LINE/DOUBLE-LINE PUMPING UNIT Product description The GEO-TEC Single-Line DN 25 Solar Station is a single-line solar pumping unit with all the equipment necessary for operation. It installs in the return flow and is equipped with a Wilo ST 25/6 pump. The pump can be shut off by means of a ball valve and a flowmeter that can be completely shut off, making it possible to replace the pump without much involved.

Fittings

Safety device

Pump Rated size Connections Gravity brake

Flow meter

Fittings Seals Insulation Max. pressure Max. temperature Single-line

Double-line

Double-line Special features

Article number 14301002 14301001 26

The GEO-TEC Double-Line DN 25 solar station is a double-line solar pump station for forward and return flow. All the fittings necessary for operation are integrated. The forward-flow line and the pump in the return-flow line can be completely shut off. The unit is completely pre-assembled and inspected for leakage.

2 gravity brakes Flow meter Rinsing and filling system Safety device Wall bracket Complete insulation Safety valve, 6 bar Pressure gauge 10 bar Connection for expansion tank to 60 litres WILO ST 25/6 (6 m delivery head ) 130 mm installation length DN 25 1" euro-cone for compression fitting Brass Cracking pressure: 20 mbar With FlowUno in the forward flow, customers must be very sure to install SKB! Measuring range from 2-15 litres Suspended solid particles, serves as fast-acting power brake for precise regulation of solar collector systems Brass EPDM/Teflon EPP = 0.041 W/(m*K) 10 bar 120°, for a brief period 160°C Centre-to-centre distance: 100 mm Width of insulation: 180 mm Height of insulation: 375 mm Centre-to-centre distance: 100 mm Width of insulation: 250 mm Height of insulation: 375 mm Built-in AIR-STOP to degas the heat-transfer medium Forward flow and return with ball valves

Description Solar pumping unit, single-line DN 25 without control system Solar pumping unit, double-line DN 25 without control system

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Solar Stations

S O L A R T E C H N I K

Compact Solar Pump Stations with Control System COMPACT WITH CONTROL SYSTEM Product description The GEO-TEC Compact Double-Line solar station includes a double-line solar pumping unit and the GEO-TEC controllers SR1, SR2 or SR3, as desired in each case. This station is a double-line solar pumping unit for forward and return flow. All the fittings necessary for operation are inte-

Fittings

Safety device

Pump Rated size Connections Gravity brake

Flow meter

Fittings Seals Insulation Max. pressure Max. temperature Dimensions

Special features

Article number 14301000 14205001 14206001

grated. The forward-flow line and the pump in the return-flow line can be completely shut off. Due to the pre-assembled control system, installing the station does not involve much, because parts are already pre-wired.

2 gravity brakes Flow meter Rinsing and filling system Safety device Wall bracket Complete insulation Safety valve, 6 bar Pressure gauge 10 bar Connection for expansion tank to 60 litres WILO ST 25/6 (6 m delivery head ) 130 mm installation length DN 25 1" euro-cone for compression fitting Brass Integrated in thermal valves Cracking pressure: 200 mm water column Measuring range from 2-15 litres Suspended solid particles, serves as fast-acting power brake for precise regulation of solar collector systems Brass EPDM/Teflon EPP = 0 041 W/(m*K) 10 bar 120°, for a brief period 160°C Centre-to-centre distance: 100 mm Width of insulation: 250 mm Height of insulation: 375 mm Automatic air bleeder permanently built in Forward flow and return with ball valves Incl. compression fitting for 22 diameter

Description Compact solar pumping unit with SR1 single-circuit control module Compact solar pumping unit with SR2 double-circuit control module Compact solar pumping unit with SR3 multi-circuit control module

Subject to setting and printing errors. Prices do not include VAT.

27

Solar Stations

S O L A R T E C H N I K

Freshwater Unit GEO-TEC Regumag X-30 Freshwater Unit Product description

Tube connections Calcification

Pressure stage Max. temperature CW static pressure Weight Connections Dimensions with cladding Safety valve

Controller

Model: Regumaq X

Article number 14002705 14000025 28

Storage unit

Insulation

Controller

Heat exchanger

Rated size Connections

High-grade steel plate heat exchanger PTC controller DN 25 1" outside thread, flat-sealing 1" euro-cone for compression fitting Insulation made of EPP Colour: charcoal High-grade steel, compact and space-saving design Calcification-proof to 35° C, 100° C buffer temperature and 50° C hot water tap temperature PN 10 120° C 2.0 bar 30 kg 1" outside thread, flat-sealing Height: 860 mm Width: 500 mm Depth: 260 mm Drinking water circuit at 10 bar

Heat exchanger

Fittings

Storage unit

The GEO-TEC Freshwater Unit is an inline heater with high capacity and very convenient to operate for detached and semi-detached homes. Output and great operating convenience for detached and semi-detached homes. The GEO-TEC Fresh Water Unit reaches the standard capacity for a housing unit already with primary forward flow temperature of just 60° C and has optimum cooling. The GEO-TEC Freshwater Unit is especially well-suited for solar collector systems.

Model: Regumaq XZ

Description Freshwater unit without circulation pump X-30 Freshwater unit with circulation pump XZ-30

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Solar Stations

S O L A R T E C H N I K

Solar Stratified Storage Unit GEO-TEC Solar Stratified Storage Unit Regusol X-DUO 15/25 Product description

Safety device Pump Connections Insulation Max. pressure Max. temperature

Dimensions SSLE 30

SSLE 50

Article number 15000001 15000002 15000009 15000120

it

Pressure flow

it ircu ry c

ircu

ry c

nda

u ma

Reg

2 gravity brakes Electronic three-way valve Rinsing and filling system Safety device Wall bracket Complete insulation Safety valve, 6 bar, primary / 3 bar secondary Pressure gauge UPS 15-60/130 (primary) UPS 15-60/130 (secondary) Primary: 1" euro-cone for compression fitting Secondary: 1" flat-sealing, outside thread EPP = 0.041 W/(m*K) Primary: to PN 6 Secondary: to PN 10 Primary: continuous operation 120° Secondary: continuous operation 110° Start-up temperatures to 160°C Total width: 560 mm Total height: 860 mm To a max. of 30 m² of collector area Flow rate, primary: 6 l/min Flow rate, secondary: 5.4 l/min To a max. of 50 m² of collector area Flow rate, primary: 10 l/min Flow rate, secondary: 9 l/min

Reg

Fittings

u ma

q, p

q, s

rima

e co

The GEO-TEC Solar Stratified Storage Unit is equipped with a flowmeter as standard. The control system is incorporated in the insulation in a visually appealing fashion. The entire station has a very sturdy design. Turbulent flow-through of the plate-type heat exchanger provides for a good self-cleaning effect.

Pressure loss

The GEO-TEC Solar Stratified Storage Unit is for loading a buffer storage unit in optimum fashion in two levels. This compact and entirely preassembled system is completely insulated, has a generously dimensioned plate-type heat exchanger, is prewired with a preset controller, enabling simple and fast installation and reliable initial start-up.

VFS: Flow rate und temperature sensor K1: Collector field P1: Connection of pump to solar circuit P2: Connection of pump to load circuit SP1: Storage tank T1: Collector temperature T2: Heat exchanger inlet from collector

Description Stratified Storage Unit DUO 15 with control system Stratified Storage Unit DUO 25 with control system Stratified Storage Unit DUO 15 without control system Stratified Storage Unit DUO 25 without control system

Subject to setting and printing errors. Prices do not include VAT.

T3: Heat exchanger inlet to the storage unit T4: Lower storage unit temperature T5: Middle storage unit temperature T6: Top storage unit temperature V1: Changeover valve for stratified loading HX: Heat exchanger

.

29

Accessories

S O L A R T E C H N I K

Accessories Quick air-bleeder for solar systems R3/8" ◆ 10 bar ◆ 160°C ◆ With ball shut-off valve ◆

High-Performance Air-Bleeder for solar systems R 1/2" 10 bar ◆ 180°C ◆ This automatic Quick Air-Bleeder is especially designed for operation at high temperatures and glycol liquid in solar collector systems. ◆ ◆

Three-way valve, motor-controlled This is for changing over with storage unit loading (bottom/top, buffer/boiler) ◆ Connection: 3 x 1" outside thread ◆ Supply: 230V/50 Hz ◆

Utility Water Mixer For optimum premixing of the utility water temperature Protects against scalding by controlled maximum temperatures ◆ Connections: 1" outside thread ◆ Setting range: 30° C - 70° C ◆ ◆

Article number 15000004 15000014 15000005 15001000 14100018 14100022

30

Description Quick air bleeder for solar systems R 3/8" R ½" High-performance Air-Bleeder for solar systems Three-way valve, motor-controlled Utility Water Mixer Compression clamp 18 mm (1 set = 4 pcs) Compression clamp 22 mm (1 set = 4 pcs)

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Accessories

S O L A R T E C H N I K

Flushing and Filling Station Filling and Flushing Station for solar collector systems ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆

◆

A compact flushing and filling station A powerful centrifugal pump provides for rapid and clean filling of collector systems Built-in fine filter with sight glass Temperature-resistant hose to 60° C Handy hose rack Shut-off valve on canister drain Mounted on a sturdy, lightweight portable dolly A fine filter before the pump makes it not only possible to filter residue from soldering and welding out of the collector system, but also to detect air bubbles in the line in good time. The canister is easy to remove for cleaning and has a large-size, lockable filling opening. On-site mixing in a clean container is possible when there is no ready-made medium available.

TECHNICAL SPECS ON PUMP: Pump Self-priming centrifugal pump Max. dry running: 1 min. Incl. hoses for suction, pressure and flushing Incl. screwed connections Pump shaft Stainless steel Casing Grey cast iron Max. delivery rate 24.2 l/min Max. pressure 5.9 bar Motor 230 V, 1.7-m cable with plug RPM 2850 min/-1 Temperature max. 60°C sustained loading Special features Built-in fine filter with sight glass Drains on the delivery side TECHNICAL SPECS ON DOLLY: Material Welded, sturdy, shaped frame Dimensions Without hoses: 102x46x55 cm Canister volume 30 litre Canister UV-stable PE canister Wide opening for filling with screw cap Shut-off valve on drain

Article number 14000010

Description Flushing and filling station

Subject to setting and printing errors. Prices do not include VAT.

31

Accessories

S O L A R T E C H N I K

Service Case for Fitters A PVC case with all the parts necessary to service collector systems Content: Handheld refractometer Digital multimeter Pressure gauge Screwdriver with voltage detector pH-value checker Compass Inspection stickers and note stickers (12 of each)

◆ ◆ ◆ ◆ ◆ ◆ ◆

Description: The handheld refractometer determines the frost-resistance of water/propylene-glycol, water/ethylene-glycol mixtures and the density of water battery acid mixtures. The measuring range is 0°-50°C for glycols. The digital multimeter can be used to measure: direct current, alternating current, direct voltage, alternating voltage, resistance, temperature, positive diode voltage drop and hFE parameters for transistors and continuity. A pressure gauge is for determining the inlet pressure on the expansion tank. The measuring range is between 0-6 bar. The phase tester can be used to quickly check whether there is pertinent voltage contacting the control system or its relevant components. The pH-value test strips allow simple determining the pH-value of the solar liquid. The compass can be used to check the exact alignment.

The inspection stickers and note stickers remind the customer of when the next servicing of its collector system is due. Only regularly serviced collector systems can function in an optimum and satisfactory fashion for years. Warranty claims required that the collector system have been serviced.

Anti-freeze Protection Analysis Instrument in PVC Case With one or two drops of test liquid, the handheld refractometer determines the frost resistance of water/propylene-glycol, water/ethylene glycol mixtures and the density of water battery acid mixtures. Range of use for measurements of: ◆ Propylene glycol (solar, heating & cooling systems) 0° - 50° C ◆ Ethylene glycol (solar, heating & cooling systems) 0° - 50° C ◆ Battery acid (car battery) 1.15-1.30 g/chmA ◆ Windscreen water 0 to -40°C

Complete set consists of: ◆ 1 handheld refractometer, 1 screwdriver for adjusting the 0-line ◆ 1 pipette for sampling heat transfer medium, 1 cleaning cloth, 1 PVC box,

foam-lined Article number 11000800 11000400 32

Description Test-kit case for collector systems Handheld Refractometer/Anti-freeze Protection Analysis Instrument

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Accessories

S O L A R T E C H N I K

Expansion Tanks Expansion tanks for solar collector systems ◆ ◆

In accordance with DIN 4757 Inlet pressure 2.5 bar

18-40 litres ◆ Suspended ◆ Galvanised steel flange ◆ Fixed nitrile membranes Article number 15000018 15000025 15000040

Litres 18 l 25 l 40 l

Design Suspended Suspended Suspended

max. bar 6 bar 6 bar 6 bar

Dimension 290 400 290 500 320 560

Connection 3/4” 3/4” 3/4”

GEO-TEC Connection Set Optional for GEO-TEC FlowDuo and FlowUno solar pump stations, for expansion tank on solar stations 3/4", for connection to the Safety Set, armoured safety house 500 mm, wall bracket 210 mm x 250, rapid-action coupling and installation materials. Article number 14000004

Connection set for expansion tank, 18-40 litres

60-80 litres ◆ Standing ◆ High-grade steel ◆ Replaceable nitrile membranes Article number 15000060 15000080

Litres 60 l 80 l

Design Standing Standing

max. bar 6 bar 6 bar

Dimension 380 730 450 735

Connection 3/4” 3/4”

Service Coupler Service coupler especially for solar expansion tanks ◆ 3/4" for 60- and 80-litre expansion tanks ◆

Article number 15005302

Service coupler for 60-80 litre expansion tank

Subject to setting and printing errors. Prices do not include VAT.

33

Accessories

S O L A R T E C H N I K

Expansion Tanks 100-300 litres ◆ Standing ◆ High-grade steel ◆ Replaceable nitrile membranes Article number 15000100 15000200 15000300

Litres 100 l 200 l 300 l

PROCEDURE Standing Standing Standing

max. bar 6 bar 6 bar 6 bar

Dimension 450 790 550 1080 630 1177

Connection 1” 1½” 1½”

Dimension 380 550 450 735 450 790 550 800 550 1080 630 984 630 1177 630 1540 780 1540

Connection 1” 1” 1” 1½” 1½” 1½” 1½” 1½” 1½”

Expansion Tanks for Heating Systems With standing design High-grade steel

◆ ◆

Article number 15200060 15200080 15200100 15200150 15200200 15200250 15200300 15200400 15200500

34

Litres 60 l 80 l 100 l 150 l 200 l 250 l 300 l 400 l 500 l

◆ ◆

Replaceable nitrile membranes Inlet pressure 1.5 bar

PROCEDURE Standing Standing Standing Standing Standing Standing Standing Standing Standing

max. bar 6 bar 6 bar 6 bar 6 bar 6 bar 6 bar 6 bar 6 bar 6 bar

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Accessories

S O L A R T E C H N I K

Heat Transfer Medium Propylene glycol Specifications: ◆ Colour: colourless ◆ Vapour pressure at 20° C: 23 mbar ◆ Density (20° C) 104 - 106 g/cm3 ◆ No irritant effect Characteristics: ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆

An odourless, hygroscopic liquid Based on 1.2-propylene glycol Food-safe Protects through special inhibitors against corrosion, aging and encrustation Completely mixable with water No nitrite, phosphate or amine Mixes with all common commercially available antifreeze agents based on 1.2-propylene glycol Biologically degradable

Application: ◆ ◆

No sustained temperatures over 170 C as this would result in aging of the antifreeze medium. Do not use with heat exchangers galvanised on the primary side.

Storage: Only store in the original container. ◆ Three-year shelf life ◆

Disposal: ◆

In accordance with ÖNORM S 2100

Waste key number: ◆

55370

Article number 15100030

Description Heat transfer concentrate of propylene glycol

Container 10 kg

15100040 15100050

Heat transfer mixture of propylene glycol Heat transfer mixture of propylene glycol

10 kg 25 kg

Subject to setting and printing errors. Prices do not include VAT.

35

Solar Control Modules

S O L A R T E C H N I K

System Control Modules Pico System Controller A simple controller, the Pico impresses people with simple adjustment. With the Pico, you're guaranteed an easy overview of temperature readings and the system's operating modes. This control module has a small LCD display via which you set the maximum temperature and temperature difference. Two trimmers for adjusting maximum temperature and temperature difference (PICO Standard). With the design with an LED and LCD, the exact adjustment can be made from the outside with one button.

◆ ◆ ◆ ◆ ◆

Design Solar scheme (1 collector, 1 storage unit) Difference controller scheme (reloading function) Return flow temperature booster scheme Heating DIP switch scheme Cooling DIP switch scheme Frost protection function can be connected Speed control can be connected System safeguard Circulation monitoring system, dT-criterion Sensor monitoring, interruption/short circuit Quantity of outputs 230 Volts Quantity of sensor inputs LED display (red-green) LCD display 11 Parameter setting Dimensions Weight Protective system Circuitry output Temperature inputs Temperature for use

Article number 17000010 17000008 17000009 36

PICO Standard X x X X X Jumper X X X 1 2 2

PICO Info X x X X X Jumper X X X 1 2 2

PICO Comfort X X DIP switch

DIP switch DIP switch X X X 1 2 2

Two trimmers Button + display Button + display W = 75 mm, H = 93 mm, T = D0 mm approx 150 g IP41 1 x 230V/AC - 1A 1 x 230V/AC – 1A Speed-controlled 2 x for PT1000 0°C to –50°C

Description GEO-TEC Pico Standard GEO-TEC Pico Info GEO-TEC Pico Comfort

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Solar Control Modules

S O L A R T E C H N I K

Single/Double-Circuit Control Modules Temperature Difference Controller SR I/ SR II This generation of controllers is designed to optimise the output of thermal collector systems. The model SR I is for controlling collector systems with a maximum of one collector field and one storage unit. Model SR II can control one collector with one storage unit, one collector field with two storage units or two collector fields with one storage unit. Functions Monitoring of the sensors and circulation ◆ The outlet for the pump (speed-controlled, of course) can be set manually for installation or service work. ◆ For the safety of the system components, a function has been allowed for to provide a system safeguard, a protective safeguard for the collectors and recooling. ◆

Display

Large LCD display Pictograms Items included Control system Operating instructions Instructions for getting started Fuse NO sensors or cables! Casing Flips open and locks in position The top piece is removable. Cables Plug-in flat-cable connections Installation By brackets Operation By four-button panel Standard functions of the SR 1 System safeguarding function Collector safeguarding function Manual Operation Recooling function Speed control Standard functions of the SR 2 System safeguarding function Collector safeguarding function Manual Operation Recooling function Speed control Metering of energy produced Antifreeze function Pipe-collector function 2 temperature difference controllers Reheating / thermostat function

Article number 17000001 17000002

GEO-TEC Single-Circuit Control Module GEO-TEC Double-Circuit Control Module

Subject to setting and printing errors. Prices do not include VAT.

37

Solar Control Modules

S O L A R T E C H N I K

System Control Modules System Controller SR III The SR III system controller impresses people with simple operation in spite of varied control possibilities. Schemes can be selected and additional multifunction controllers freely assigned. With the SR III, up to three energy output terminals and two energy generators (collector fields) can be controlled in optimum fashion. This control system also has a data interface via which a data stick can be used to install various special purpose programmes on the controller. The controller has ten inputs for PT PT1000, three of which are optionally for digital input or radiation sensors, six 230V/ AC outputs, all with speed control. Display Items included

Casing Cables Installation Operation Standard functions

Heating circuit function

Artikelnummer 17000003 38

Large LCD display Selectable language Control system Operating instructions Instructions for getting started Fuse NO sensors or cables! Flips open and locks in position The top piece is removable Plug-in flat-cable connections By brackets By four-button panel Manual operation Pipe-collector function Collector safeguarding function Recooling function System safeguarding function Antifreeze function Circulation Alarm Timer Thermostat function Threshold switch Return flow temperature booster Wood-powered boiler function Temperature difference controller Radiation sensor function Pump safeguarding function Data logging Multifunction controller Metering of energy produced Anti-legionella function Triggering of mixer & pump Adjustment to forward flow temperature or room temperature Triggering of hot water supply Beschreibung GEO-TEC Mehrkreisregelung

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Solar Control Modules

S O L A R T E C H N I K

Accessories Temperature sensor Storage unit sensor: PVC 6x25 mm or 8x25 mm with 2,5 m PVC-coated cable Can be used up to +105° C, taking the installation instructions into account. Collector sensor: PT PT1000 6x25 mm or 8x25 mm with 2.5 m silicon cable and teflonised strands Can be used up to +250° C, taking the installation instructions into account. IMMERSION SLEEVE made of brass 112 mm long, R ½", temperature range -40° C to +200° C Length immersion sleeve: 94 mm; diameter: 6 mm; material: CuZn39Pb3. Sensor connection socket Sensor connection socket with built-in voltage surge protection Filters out a certain part of atmospheric excess voltage. The collector sensor can be extended simply and safely. Includes brackets for simple wall mounting Casing: Plastic, grey, protective system IP 65 Measurements: 80 mm x 80 mm x 50 mm Temperature range: -25°C to +70°C Article number 17000200 17000400 17000100 17000600 17000300 17000005

Description Storage unit sensor 6 mm Storage unit sensor 8 mm Collector sensor 6 mm Radiation sensor Brass immersion sleeve: 112 mm Sensor connection socket

Output Metering Module Can only be used in combination with an SR II/SR III!! ◆ Horizontal or vertical installation ◆ Operating pressure: to 16 bar as per DIN 2401; hot water to 90° C ◆ Up to a Qn of 1.5 m3/h ◆ Contact loading: 24V (without dropping resistor) ◆ The contact maker is equipped with a 100 Ω 1/4 W protective resistor for volumetric flowmeters, 0.2 A (protective low voltage) ◆ State-of-the-art single-jet rotary vane meter with fully dry running meter and magnetic coupling ◆ To rule out interference by impure water, only the impeller wheel operates in the wet area. ◆ The counter turns for easy reading. ◆ A shielding cap that can be sealed with lead protects against magnetic influences

Article number 17000500 17000006 17000007

Description Output metering module to 1.5 m3/h DATA STICK for SR III PC-USB interface

Subject to setting and printing errors. Prices do not include VAT.

39

Storage Units, Buffers & Accessories

S O L A R T E C H N I K

Solar Storage Unit SSH-PU Product description: ◆ An standing storage unit made of S235JRG steel with two large-surface bare-tube heat exchangers ◆ Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated ◆ 1 1/4" protective magnesium anode to complete the cathodic corrosion protection as per Part 6

of DIN 4753 Sensor tube included Comes with thermometer (separate package) A 1 1/2" sleeve is provided as standard for retrofitting an electric heating system. Inspection opening 180 x 110 x hole diam. 150 All outside thread, flat-sealing CFC-free 50-mm PU rigid-foam insulation with casing made of lined, coloured plastic in accordance with Part 8 of DIN 4753, RAL colour silver 9006 ◆ Pressure resistance 10 bar ◆ ◆ ◆ ◆ ◆ ◆

Storage unit model Volume Diameter without insulation Diameter with insulation Insulation [mm] Height with insulation Tilting height Heating surface, top/bottom Water volume, HX, top/bottom Volume flow, HX, top/bottom Water volume, HX, top/bottom Rated output figure** top/bottom as per DIN 4708 Continuous operation, top/bottom As per DIN 4708 (10/80/45) °C max. T/max. PTW max. T/max. P Heating*** [°C / bar] Cold/hot water, outside thread, (CW/HW) Circulation, outside thread (circ.) Heat exchangers, all outside thread (FF/RF) Electric heating, inside thread (E-heating) Nominal diameter of inspection flange (RFL) Sensor/controller connections (F1, F2) Thermometer connection Dimensions

CW RF1 FF1 RF2 Z FF2 HW El. heating Weight 40

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

SSH-PU 200 200 500* 600 50* 1232 1370 0,6 / 0,8 3,8 / 5,0 0,7 /1,2 30 / 70 1,23 / 3,6

[litres] [mm] [mm] 50* [mm] [mm] [m2] [litres] [m³/h] [mbar]

[l/h] [°C / bar] [inches] [inches] [inches] [inches]

SSH-PU 300 300 500* 600 50* 1697 1800 0,8 / 1,2 5,0 / 7,5 1,0 / 1,6 35 / 90 1,8 / 8

SSH-PU 400 400 600* 700 50* 1660 1800 1,0 / 1,5 6,3 / 9,4 1,2 / 2,0 45 / 120 2,1 / 11

410 / 710 605 / 970 720 / 1180 95 / 10 95 / 10 95 / 10 160 / 25 160 / 25 160 / 25 G1 G1 G1 G¾ G¾ G¾ G¾ G¾ G¾ G 1½ G 1½ G 1½ DN 110 DN 110 DN 110 Sensor sleeve, internal diameter 9 mm M8 Thermometer option

SSH-PU 500 500 650* 750 50* 1783 1970 1,2 / 1,8 7,5 / 11,3 1,4 / 2,4 55 / 250 2,5 / 14 830 / 1400 95 / 10 160 / 25 G1 G¾ G¾ G 1½ DN 110

SSH-PU 200 SSH-PU 300 SSH-PU 400 SSH-PU 500

Article number

Description

110 180 630 780 880 990

110 180 580 945 1045 1215

13100200 13100300 13100400 13100500

Solar Storage Unit 200 l with PU insul. Solar Storage Unit 300 l with PU insul. Solar Storage Unit 400 l with PU insul. Solar Storage Unit 500 l with PU insul.

705 85

770 114

127 205 635 965 1065 1261 top 770 166

128 205 685 1020 1125 1325 920 215

* Insulation not removable! ** To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified. *** Only with water in the liquid state as the operating medium for the heat exchangers

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Storage Units, Buffers & Accessories

S O L A R T E C H N I K

Solar Storage Unit SSH-WS Product description: An standing storage unit made of S235JRG steel with two large-surface bare-tube heat exchangers Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated 114" protective magnesium anode to complete the cathodic corrosion protection Optional with external current anode in accordance with Part 6 of DIN 4753 Temperature sensor, variably positionable by means of sensor terminal strip Comes with thermometer (separate package) A 1 1/2" sleeve is provided as standard for retrofitting an electric heating system. Inspection opening All outside thread, flat-sealing CFC-free 80-mm PU flexible foam insulation with PVC top coat, incl. floor insulation (100 mm thick) in accordance with Part 8 of DIN 4753, RAL colour silver 9006 ◆ Pressure resistance 10 bar ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆

Storage unit model Table of Contents Diameter without insulation Diameter with insulation Insulation Height with insulation Tilting height Heating surface, top/bottom Water volume, HX, top/bottom Volume flow, HX, top/bottom Pressure loss, HX, top/bottom Rated output figure** top/bottom as per DIN 4708 Continuous operation, top/bottom as per DIN 4708 (10/80/45) °C max. T/max. P TW max. T/max. P heating*** Cold/hot water, outside thread, (CW/HW) Circulation, outside thread (circ.) Heat exchangers, all outside thread (FF/RF) Electric heating, inside thread (el. heating) Nominal diameter of inspection flange (RFL) Sensor/controller connections Thermometer connection

Dimensions

CW RF1 FF1 RF2 Z FF2 HW El. heating Weight

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

SSH-WS 750 SSH-WS 1000 750 1000 750 900 950 1100 100 100 2082 2010 2050 2020 1,9 / 2,7 1,9 / 2,9 16,0 / 22,8 16,0 / 24,5 2,1 / 4,2 2,1 / 4,6 40 / 180 40 / 200 13 / 35 13 / 41 1220 / 2470 1220 / 2690 95 / 10 95 /10 160 / 25 160 / 25 G 1½ G 1½ G¾ G¾ G 1¼ G 1¼ G 1½ G 1½ DN 200 DN 200 Sensor terminal strip M8 Thermometer option

[litres] [mm] [mm] [mm] [mm] [mm] [m2] [litres] [m³/h] [mbar] [l/h] [°C/bar] [°C/bar] [inches] [inches] [inches] [inches]

SSH-WS 750

SSH-WS 1000

Article number Description

157 280 967 1127 1227 1567 1855 1032 344*

180 320 947 1097 1197 1482 1760 1012 400*

13100750 13101000

Subject to setting and printing errors. Prices do not include VAT.

Solar Storage Unit 750 l with flexible foam insul. Solar Storage Unit 1000 l with flexible foam insul.

* Weight without insulation ** To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified. *** Only with water in the liquid state as the operating medium for the heat exchangers

41

Storage Units, Buffers & Accessories

S O L A R T E C H N I K

High-grade Steel Storage Unit – Solar HSS Product description: ◆ For use for district heating, solar boilers, heating boilers and condensing

appliance technology; with internally positioned bare-tube heat exchanger Corrosion-resistant in use with drinking water With sensor terminal strip for all common sensors Made in accordance with DIN 4753; flexible foam insulation 100 mm RAL 9006 Operating pressures allowed: drinking water = 10 bar/heating water = 25 bar; Permissible operating temperature: drinking water = 95° C/heating water = 110°C Made of 1.4571 high-grade steel

◆ ◆ ◆ ◆

Storage unit model Volume Diameter without insulation Diameter with insulation Insulation Height with insulation Tilting height Heating surface, top/bottom Water volume, HX, top/bottom Volume flow, HX, top/bottom Pressure loss, HX, top/bottom Rated output figure* top/bottom as per DIN 4708 Continuous operation, top/bottom As per DIN 4708 (10/80/45) °C max. T/max. P TW max. T/max. P heating Cold/hot water, (CW/WW) Circulation (circ.) Heat exchangers, outside thread (FF/RF) Electric heating Nominal diameter of inspection flange (RFL) Sensor/controller connections Thermometer connection

Dimensions

CW RF1 FF1 RF2 Z FF2 HW Weight

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

[litres] [mm] [mm] [mm] [mm] [mm] [m2] [litres] [m³/h] [mbar]

HSS 200 200 500 700 100 1410 1380 0,9/0,9 3,0/3,0 0,8/1,65 160/580 2/4

HSS 300 300 500 700 100 1660 1625 0,9/1,4 4,7/7,3 1,3/2,58 40/190 3/12

[l/h] [°C/bar] [°C/bar] [inches] [inches] [inches]

476/978 95/10 110/25 Rp 1 Rp ¾ G1

784/1522 820/1743 943/1924 95/10 95/10 95/10 110/25 110/25 110/25 Rp 1 Rp 1 Rp 1 Rp ¾ Rp ¾ Rp ¾ G 1¼ G 1½ G 1½ Possible via inspection flange DN 110 Sensor terminal strip Rp ½

[inches]

HSS 400 400 600 800 100 1690 1670 0,9/1,8 6,2/12,5 1,4/2,95 15/90 3/20

HSS 500 500 600 800 100 1960 1920 0,9/1,8 6,2/12,5 1,6/3,26 15/105 4/23

HSS 750 750 750 950 100 2040 2015 1,4/2,4 9,7/16,6 2,06/4,01 35/200 10/35

HSS 1000 1000 850 1050 100 2120 2070 1,6/2,8 11,1/19,5 2,3/4,8 50/320 14/46

1215/2413 95/10 110/25 Rp 1½ Rp ¾ G 1½

1348/2846 95/10 110/25 Rp 1½ Rp ¾ G 1½

HSS 200 HSS 300 HSS 400 HSS 500 HSS 750 HSS 1000

Article number

Description

65 305 605 685 765 1065 1145 75

13200200 13200300 13200400 13200500 13200750 13201000

High-grade Steel Storage Unit 200 l, 50 mm, PU insul. High-grade Steel Storage Unit 300 l, 50 mm, PU insul. High-grade Steel Storage Unit 400 l, 50 mm, PU insul. High-grade Steel Storage Unit 500 l, 50 mm, PU insul. High-grade Steel Storage Unit 750 l, 100 mm, PU insul. High-grade Steel Storage Unit 1000 l, 100 mm, PU insul.

65 305 795 870 945 1260 1375 100

70 330 890 975 1055 1325 1420 115

70 330 890 975 1110 1380 1670 120

80 380 940 1025 1115 1430 1720 185

80 395 995 1185 1090 1585 1710 210

* Um die angegebene NL–Zahl zu erreichen muss die Kesselleistung größer sein als die angegebene Dauerleistung.

42

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Storage Units, Buffers & Accessories

S O L A R T E C H N I K

Brauchwasserspeicher BWS Product description: ◆ Standard storage unit made of S235JR steel with a large-surface bare-tube heat

exchanger ◆ Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated ◆ Protective magnesium anode 1 ¼" to complete the cathodic corrosion

protection in accordance with Part 6 of DIN 4753

◆ Sensor tube included ◆ Comes with thermometer (separate package) ◆ NEW: A 1 ½" sleeve is provided as standard for retrofitting an electric

heating system for all sizes

◆ Inspection opening 180 x 110 x hole diam. 150 ◆ All outside thread, flat-sealing ◆ CFC-free 50-mm PU rigid-foam insulation with casing made of lined, coloured

plastic in accordance with Part 8 of DIN 4753, RAL colour silver 9006 ◆ Pressure resistance 10 bar

Storage unit model Volume Diameter without insulation Diameter with insulation Insulation [mm] Height with insulation Tilting height Heating surface, top/bottom Water volume, HX, top/bottom Volume flow, HX, top/bottom Pressure loss, HX, top/bottom Rated output figure** top/bottom as per DIN 4708 Continuous operation, top/bottom As per DIN 4708 (10/80/45) °C max. T/max. PTW max. T/max. P Heating*** [°C / bar] Cold/hot water, outside thread, (CW/HW) Circulation, outside thread (circ.) Heat exchangers, all outside thread (FF/RF) Electric heating, inside thread (E-heating) Nominal diameter of inspection flange (RFL) Sensor/controller connections (F1, F2) Thermometer connection Dimensions

CW RF FF Z HW El. heating Weight

[mm] [mm] [mm] [mm] [mm] [mm] [kg]

[litres] [mm] [mm] [mm] [mm] [mm] [m2] [Liter] [m³/h] [mbar]

[l/h] [°C / bar] [°C / bar] [inches] [inches] [inches] [inches]

BWS 200 200 500* 600 50* 1232 1370 0,9 5,7 1,2 70 3,6

BWS 300 300 500* 600 50* 1697 1800 1,2 7,5 1,6 60 8

BWS 400 400 600* 700 50* 1660 1750 1,5 9,4 2,0 120 11

BWS 500 500 650* 750 50* 1783 1970 1,8 11,3 2,4 250 14

710 970 1180 1400 95 / 10 95 / 10 95 / 10 95 / 10 160 / 25 160 / 25 160 / 25 160 / 25 G1 G1 G1 G1 G¾ G¾ G¾ G¾ G¾ G¾ G¾ G¾ G 1½ G 1½ G 1½ G 1½ DN 110 DN 110 DN 110 DN 110 Sensor sleeve, internal diameter 9 mm M8 Thermometer option

BWS 200

BWS 300

BWS 400

BWS 500

Article no.

Description

110 180 630 780 oben 800 73

110 180 580 1045 oben 770 94

127 205 635 1065 oben 770 151

128 205 685 1125 oben 920 195

13210200 13210300 13210400 13210500

Utility Water Storage Unit 200 l with PU insulation Utility Water Storage Unit 300 l with PU insulation Utility Water Storage Unit 400 l with PU insulation Utility Water Storage Unit 500 l with PU insulation

* Insulation not removable! ** To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified. *** Only with water in the liquid state as the operating medium for the heat exchangers

Subject to setting and printing errors. Prices do not include VAT.

43

Storage Tanks, Buffers and Accessories

S O L A R T E C H N I K

High-performance Storage Unit HLS Product description: ◆ An standing storage unit made of S235JR steel with a large-surface

bare-tube heat exchanger ◆ Inside: enamelling in accordance with Part 3 of DIN 4753; outside:

◆ 1 ¼" protective magnesium anode to complete the cathodic corrosion

primer-coated

protection Temperature sensor, variably positionable by means of sensor terminal strip Inspection opening 180 x 110 x hole diam. 150 All outside thread, flat-sealing CFC-free, 80-mm PU flexible-foam insulation with PVC top coat incl. floor insulation in accordance with Part 8 of DIN 4753, RAL colour silver 9006 ◆ Pressure resistance 10 bar ◆ ◆ ◆ ◆

Speicher Typ Volume Diameter without insulation Diameter with insulation Insulation Height with insulation Tilting height Heating surface, top/bottom Water volume, HX, top/bottom Volume flow, HX, top/bottom Pressure loss, HX, top/bottom Rated output figure* top/bottom as per DIN 4708 As per DIN 4708 (10/80/45) °C max. T/max. P TW max. T / max. P HZG** max. T/max. P heating Circulation (Z) Heat exchangers (FF/RF) Electric heating Nominal diameter of inspection flange (RFL) Sensor/controller connections Thermometer connection Dimensions

CW RF FF Z HW Weight

[mm] [mm] [mm] [mm] [mm] [kg]

[litres] [mm] [mm] [mm] [mm] [mm] [m2] [Liter] [m³/h] [mbar] [l/h] [°C / bar] [°C / bar] [inches] [inches] [inches]

HLS 300 HLS 400 300 400 550 600 710 760 80 80 1560 1790 1550 1780 3,2 4,2 20,1 26,4 3,6 3,8 410 590 19 27 2100 2250 95 / 10 95 / 10 160 / 25 160 / 25 G1 G1 G ¾ IG G ¾ IG Rp 1 IG Rp 1 IG Possible via inspection flange DN 110 Sensor terminal strip M8 Thermometer option

HLS 500 500 650 810 80 1756 1760 4,6 28,9 4,0 720 35 2400 95 / 10 160 / 25 G1 G ¾ IG Rp 1 IG

HLS 300

HLS 400

HLS 500

Artikelnr.

Beschreibung

115 210 1270 1000 1393 170

129 210 1530 906 1611 208

130 225 1470 1200 1571 235

13510200 13510300 13510400 13510500

High-performance Storage Unit 200 l, 50 mm High-performance Storage Unit 300 l, 50 mm High-performance Storage Unit 400 l, 50 mm High-performance Storage Unit 500 l, 50 mm

* To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified. ** Only with water in the liquid state as the operating medium for the heat exchangers

44

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Storage Units, Buffers & Accessories

S O L A R T E C H N I K

Buffer Storage Unit without PSD set of tubing Product description: ◆ Standing storage unit made of S235JR steel ◆ Inside untreated, outside with primer coat ◆ Temperature sensor, variably positionable by means of sensor

terminal strip ◆ Optional flange 280 x 200 x hole diameter 245 for inspection

or upgrading With finned pipe heat exchanger (PSX-F) - for extra charge, see accessories ◆ CFC-free, 80-mm PU flexible-foam insulation with PVC top coat incl. floor insulation in accordance with Part 8 of DIN 4753, from 800 litres with 100-mm thickness, RAL colour silver 800 ◆ Pressure resistance 3 bar

Storage Unit Model PSX / PSX-F Volume [litres] Diameter without insulation [mm] Diameter with insulation [mm] Insulation [mm] Height with insulation [mm] Tilting height [mm] max. T / max. P heating [°C / bar] Loading/unloading connections (A1-A4) [inches] Electric heating: only PSX-F Nominal diameter of inspection flange (RFL): only PSX-F Sensor/controller connections Thermometer connection Air bleed [inches]

500 500 650 810 50 1700 1710

800 800 790 990 100 1802 1780

1000 1000 790 990 100 2202 2180

Dimensions A1 RFL A2 A3 A4 Weight

500 245 350 645 1045 1405 95

800 246 351 646 1046 1446 143*

1000 246 351 786 1326 1866 150*

Article number 13400500 13400800 13401000 13401500 13402000 13403000

[mm] [mm] [mm] [mm] [mm] [kg]

1500 2000 1500 2000 1000 1100 1200 1300 100 100 2130 2410 2150 2450 95 / 3 Rp 1½ Sensor terminal strip DN 200 Sensor terminal strip M8 Thermometer option Rp 1¼

1500 320 425 786 1253 1720 211*

2000 365 470 905 1445 1985 270*

3000 3000 1150 1350 100 3160 3170

3000 375 480 1475 2265 3055 348*

Description Buffer Storage Unit, 500 l with insulation Buffer Storage Unit, 800 l with insulation Buffer Storage Unit, 1000 l with insulation Buffer Storage Unit, 1500 l with insulation Buffer Storage Unit, 2000 l with insulation Buffer Storage Unit, 3000 l with insulation

* Weight without insulation

Subject to setting and printing errors. Prices do not include VAT.

45

Storage Tanks, Buffers and Accessories

S O L A R T E C H N I K

Combination/Buffer Storage Unit KSW-D Product description: ◆ The Combination/Buffer Storage Unit is equipped with an integrated high-grade steel tube heat exchanger

without circulation**** ◆ It is used chiefly in solar collector systems and heating systems. ◆ A buffer storage unit made of high-quality steel S235JR; inside: untreated; outside: primer-coated ◆ Pressure resistance of buffer storage unit: 3 bar ◆ Two large-surface bare-tube heat exchangers ◆ CFC-free flexible foam insulation with PVC top coat, RAL colour silver 9006 ◆ From 800 l, 1 ½" sleeve shifted by 30° for optional el. heating (RCN 65 - 4 kW ) at height of connection piece A5 ◆ Temperature sensor, variably positionable by means of sensor terminal strip ◆ All outside thread, flat-sealing

Combination/Buffer Storage Unit KSW Volume of Buffer Storage Unit Diameter without insulation Diameter with insulation Insulation [mm] Height Tilting height Heating surface, HX corrugated tube KSW Water volume, HX corrugated tube KSW Rated output figure* as per DIN 4708 KSW 10-min. peak tapping quantity KSW With temperature of standby volume temp.** 52° C 10-min. peak tapping quantity KSW With temperature of standby volume temp.** 65° C 10-min. peak tapping quantity KSW With storage unit temp.*** 65° C max. T / max. P HW heating max. T / max. P Buffer Storage Unit max. ∆ p storage unit/hot water corrugated tube Cold/hot water, outside thread Heat exchanger (FF/RF) all outside thread Loading/unloading connections (A2-A5) outside thread Loading/unloading connections (A1+A6) outside thread Electric heating (E-HTG) inside thread Sensor/controller connection

450 450 600 800

650 650 700 900

800 800 790 990

1960 2000

1970 2005

2020 2060

1,7

2,2

[litres]

105

[litres] [litres] [°C / bar] [°C / bar] [bar] [inches] [inches] [inches] [inches] [inches]

[litres] [mm] [mm] [mm] [mm] [m2] [litres]

2,5

900 900 790 990 100 2190 2230 5 27 2,9

1050 1050 900 1100

1300 1300 900 1100

2000 2050

2430 2470

3,4

3,6

125

154

160

175

200

145

170

210

230

270

340

182

250

324

G¾ G1 G1 G 1¼ –

G¾ G1 G1 G 1¼ –

364 390 110 / 16 95 / 3 6 G¾ G¾ G¾ G1 G1 G1 G1 G1 G1 G 1¼ G 1¼ G 1¼ Rp 1½ Rp 1½ Rp 1½ Sensor terminal strip

420

G¾ G1 G1 G 1¼ Rp 1½

* To achieve the rated output figure cited, the boiler output has to ** Standby volume between connections A5 und A6; continuous operation operation ***Standby volume between connections A1 und A6; continuous operation **** With KSW circulation is possible via T-piece in the CW inlet.

46

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Storage Units, Buffers & Accessories

S O L A R T E C H N I K

Combination/Buffer Storage Unit KSW-D

Combination/Buffer Storage Unit KSW Dimensions A1 RL1 (only Models 1 & 2) A2 VL1 (only Models 1 & 2) RL2 (only Model 2) A3 A4 VL2 (only Model 2) A5 ELECTRIC HEATING A6 Weight, KSW

Article number 13510450 13510650 13510800 13510900 13511050 13511300

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

450

650

800

900

1050

1300

105 195 495 595 695 795 995 1095 1195 – 1715 193

110 200 500 600 700 800 1000 1100 1200 – 1720 218

125 225 540 645 745 850 1060 1165 1265 1265 1745 268

125 225 570 685 785 900 1130 1245 1360 1360 1930 283

110 210 525 630 730 835 1045 1150 1250 1250 1730 316

110 210 600 730 830 960 1220 1350 1470 1470 2150 348

Description Combination Storage Unit, 450 l with utility water heat exchanger Combination Storage Unit, 650 l with utility water heat exchanger Combination Storage Unit, 800 l with utility water heat exchanger Combination Storage Unit, 900 l with utility water heat exchanger Combination Storage Unit, 1050 l with utility water heat exchanger Combination Storage Unit, 1300 l with utility water heat exchanger

Subject to setting and printing errors. Prices do not include VAT.

47

Storage Tanks, Buffers and Accessories

S O L A R T E C H N I K

Combination/Buffer Storage Unit KSE-D Product description: ◆ This storage unit with an integrated utility water storage unit can be used as a combination storage unit. ◆ An integrated utility water storage unit 200 litres in volume is with enamelling in accordance with Part 3 of DIN 4753,

with Mg protective anode. ◆ It is used chiefly in solar collector systems and heating systems. ◆ A buffer storage unit made of high-quality steel S235JR; inside: untreated; outside: primer-coated ◆ Pressure resistance of buffer storage unit of 3 bar/utility water storage unit 10 bar ◆ Two large-surface bare-tube heat exchangers ◆ CFC-free flexible foam insulation with PVC top coat, RAL colour silver 9006 ◆ Temperature sensor, variably positionable by means of sensor terminal strip ◆ From 800 l, 1 ½" sleeve shifted by 30° for optional el. heating (RCN 65 - 4 kW )at height of connection piece A5 ◆ The utility water storage unit is equipped with a circulation connection and a cleaning flange as standard. ◆ All outside thread, flat-sealing

The KSE Combination Storage Unit Volume of Combination Storage Unit (HTG/HW) Diameter without insulation Diameter with insulation Insulation Height Tilting height Heating surface, top/bottom Water volume, HX, top/bottom Rated output figure* as per DIN 4708, KSE max. T/max. PTW (KSE) max. T / max. P HW heating max. T / max. P Buffer Storage Unit Cold/hot water, outside thread Circulation (Circ.) outside thread Heat exchanger (FF/RF) all outside thread Loading/unloading connections (A2-A5) outside thread Loading/unloading connections (A1+A6) outside thread Electric heating (el. heating) inside thread Sensor/controller connections

[litres] [mm] [mm] [mm] [mm] [mm] [m2] [Liter] [°C / bar] [°C / bar] [°C / bar] [inches] [inches] [inches] [inches] [inches] [inches]

250/200 250/200 600 800

450/200 450/200 700 900

1960 2000 1,6 9,6 1,3

1970 2005 2 12 1,8

G¾ G¾ G1 G1 G 1¼ –

G¾ G¾ G1 G1 G 1¼ –

600/200 700/200 600/200 700/200 790 790 990 990 100 2020 2190 2060 2230 2,4 2,6 14,5 15,7 2,1 2,5 95 / 10 110 / 16 95 / 3 G¾ G¾ G¾ G¾ G1 G1 G1 G1 G 1¼ G 1¼ Rp 1½ Rp 1½ Sensor terminal strip

850/200 850/200 900 1100

1100/200 1100/200 900 1100

2000 2050 2,9 17,5 3

2430 2470 3,3 20 3,2

G¾ G¾ G1 G1 G 1¼ Rp 1½

G¾ G¾ G1 G1 G 1¼ Rp 1½

* To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified. ** Standby volume between connections A5 und A6; continuous operation [l/h] = 10 min. peak tapping quantity x 6 at boiler output > continuous operation *** Standby volume between connections A1 und A6; continuous operation [l/h] = 10 min. peak tapping quantity x 6 at boiler output > continuous operation

48

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Storage Tanks, Buffers and Accessories

S O L A R T E C H N I K

Combination/Buffer Storage Unit KSE-D

The KSE Combination Storage Unit Dimensions A1 RL1 (only Models 1 & 2) A2 VL1 (only Models 1 & 2) RL2 (only Model 2) A3 A4 VL2 (only Model 2) A5 ELECTRIC HEATING A6 Weight of KSE

Article number 13500450 13500650 13500800 13500900 13501050 13501300

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

250/200

450/200

600/200

700/200

850/200

1100/200

105 195 495 595 695 795 995 1095 1195 – 1715 244

110 200 500 600 700 800 1000 1100 1200 – 1720 269

125 225 540 645 745 850 1060 1165 1265 1265 1745 319

125 225 570 685 785 900 1130 1245 1360 1360 1930 334

110 210 525 630 730 835 1045 1150 1250 1250 1730 367

110 210 600 730 830 960 1220 1350 1470 1470 2150 399

Article number Combination Storage Unit, 450 l with 200-l utility water storage unit Combination Storage Unit, 650 l with 200-l utility water storage unit Combination Storage Unit, 800 l with 200-l utility water storage unit Combination Storage Unit, 900 l with 200-l utility water storage unit Combination Storage Unit, 1050 l with 200-l utility water storage unit Combination Storage Unit, 1300 l with 200-l utility water storage unit

Subject to setting and printing errors. Prices do not include VAT.

49

Storage Units, Buffers & Accessories

S O L A R T E C H N I K

Buffer Storage Unit with set of tubing PSD-R Product description: ◆ An standing storage unit made of S235JR steel with a large-surface

bare-tube heat exchanger ◆ Inside untreated, outside with primer coat ◆ Temperature sensor, variably positionable by means of sensor

terminal strip ◆ CFC-free, 80-mm PU flexible-foam insulation with PVC top coat incl. floor insulation in accordance with Part 8 of DIN 4753, RAL colour silver 800 thickness, RAL colour silver 9006 ◆ Pressure resistance 3 bar

Storage unit model Table of Contents Diameter without insulation Diameter with insulation Insulation Height with insulation Tilting height Heating surface Water volume, HX max. T / max. P storage unit max. T / max. P GWT Heat exchanger outside thread (FF/RF) Loading/unloading connections (A1-A4) Electric heating Inspection flange (RFL) Sensor/controller connections Thermometer connection Air bleed Dimensions A1, RF A2 FF A3 A4 Weight (without insulation) Article number 13700500 13700800 13701000 13701500 13702000 50

[mm] [mm] [mm] [mm] [mm] [kg]

[litres] [mm] [mm] [mm] [mm] [mm] [m2] [Liter] [°C / bar] [°C / bar] [inches] [inches]

PSD-R 500 500 650 810 80 1700 1710 2,5 15,7 95 / 3 110 / 16 G1 Rp 1½

[inches]

Rp 1¼

PSD-R 500 245 645 870 1045 1405 120

PSD-R 800 PSD-R 1000 PSD-R 1500 800 1000 1500 790 790 1000 990 990 1200 100 100 100 1802 2202 2130 1780 2180 2150 2,5 3,2 4,25 15,7 20,1 26,7 95 / 3 95 / 3 95 / 3 110 / 16 110 / 16 110 / 16 G1 G1 G1 Rp 1½ Rp 1½ Rp 1½ This is not possible. – Sensor terminal strip – Rp 1¼ Rp 1¼ Rp 1¼

PSD-R 800 246 646 816 1046 1446 183

PSD-R 1000 246 786 946 1326 1866 202

PSD-R 1500 320 786 1020 1253 1720 281

PSD-R 2000 2000 1100 1300 100 2410 2450 4,25 26,7 95 / 3 110 / 16 G1 Rp 1½

Rp 1¼ PSD-R 2000 365 905 1065 1445 1985 350

Article number Description Buffer Storage Unit, 500 l with insulation & set of tubing Buffer Storage Unit, 800 l with insulation & set of tubing Buffer Storage Unit, 1000 l with insulation & set of tubing Buffer Storage Unit, 1500 l with insulation & set of tubing Buffer Storage Unit, 2000 l with insulation & set of tubing

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Storage Units and Heat Exchangers

S O L A R T E C H N I K

Accessories List for Storage Units Built-in electric heating systems for vitreous enamelled storage units ◆ Built-in electric heating systems designed with insulation especially for use in vitreously

◆ ◆ ◆ ◆ ◆ ◆

enamelled solar and utility-water storage units as supplementary or emergency heating, for horizontal installation. Simple installation provided by 1½" threaded head with outside thread. Temperature is preselected by a thermostat with a setting range of 30°-75° C. Temperature-limiting safety switch 95° C Comes with operating instructions and circuit diagram. For installation in a blind flange, be sure to also order a blind flange with sleeve in sizes that fit. Casing: plastic

Note: The electric connection may only be made by authorised and qualified personnel in accordance with VDE regulations and ordinances by the PUCs (public utility companies). This must also be complied with in cases of malfunctions and repairs. Combinations with CrNi boilers are not advisable. Output [kW] 3,0 Article number 13000504

Voltage [V] 230/400 Description Electric Heating Element EHP30 3000W/230V/375 mm

Output [kW] 3,0 3,75 4,5 6,0 Article number 13000502 13000510 13000503 13000501

Depth [mm] (390)375

Voltage [V] 400 400 400 400

Depth [mm] 390 550 500 550

Description Electric Heating Element EHP30 3000 W / 400 V / 390 mm Electric Heating Element EHP37 3750 W / 400 V / 320 mm Electric Heating Element EHP45 4500 W / 400 V / 500 mm Electric Heating Element EHP60 6000 W / 400 V / 550 mm

Built-in electric heating systems for combination storage units (From volume of 800 l in total volume) ◆ 1½“ outside thread, controller 30°-80° C, STP fixed 110° C

Output [kW] 4,0 4,0 Article number 13000508 13000509

Voltage [V] 400 230

Installation depth [mm] 275 275

Description Electric Heating System for Combination Storage Unit 4000 W/400 V/275 mm Electric Heating System for Combination Storage Unit 4000 W/230 V/275 mm

Subject to setting and printing errors. Prices do not include VAT.

51

S O L A R T E C H N I K

Gelötete Soldered Plate-type Heat Exchangers Plattenwärmetauscher

52

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Plate-type Heat Exchangers

S O L A R T E C H N I K

◆ Maintenance-free ◆ A pressure- and temperature-resistant, lightweight heat exchanger ◆ Short response times for temperature changes (on account of small volumes) ◆ Minimum soiling factor due to optimised embossed pattern for the plate ◆ Self-cleaning ◆ Optimised design for every application ◆ Low space requirement/kW-output ◆ 100% exploitation of materials

Model B25T*10 B25T*20 B25T*30 B25T*40

Article number 19000012 19000013 19000014 19000015 19000016

Output [kW] – 7,2 – 7,8 – 19,8 – 20,4 – 34,2 – 34,8 – 49,2

Collector area m2 bis 12 13 – 33 34 – 57 58 – 82

Pressure loss kPa 5/5 10/8 13/10 15/12

Description Plate-type Heat Exchanger B25* 10 with insulation Plate-type Heat Exchanger B25* 20 with insulation Plate-type Heat Exchanger B25* 30 with insulation Plate-type Heat Exchanger B25* 40 with insulation Plate-type Heat Exchanger B25* 50 with insulation

Note: You get the best efficiency through our customised design (calculation) of the heat exchanger FREE OF CHARGE.

Subject to setting and printing errors. Prices do not include VAT.

53

Tubing and insulating systems

S O L A R T E C H N I K

Flexible Solar Tubing Systems Product description: GEO-TEC Thermoflex Solar Tubing Systems consist of two tubes glued to one another, and insulated high-grade steel corrugated tubes. The insulation and sheathing are high-temperatureresistant and available in customised lengths. Simple separation of the twin tubes without damaging the protective foil or the insulation enable problem-free tubing of the solar collector system. The Easy Drill Screw-Connection Kit allows very simple screwed connections of the high-grade steel corrugated tube to the lines and fittings. The GEO-TEC Thermoflex tubing systems are provided with a black, tear-resistant outer sheathing. Available in lengths of: 10 m, 15 m, 20 m or 25 m. Customised lengths are possible up to 100 m, and will be supplied on request.

Thermoflex EWK double Highly flexible high-grade steel corrugated tube With integrated sensor cable With high-temperature India rubber to +150° C, and for Bending radii: DN 16 and DN 20 = 0.15 m, DN 25 = Insulation thickness: 13 mm Available on request: Insulation thickness: 19 mm

◆ ◆ ◆ ◆ ◆ ◆

The tubes are rolled in bundles, EWK to DN 20 in 800 x 800 cardboard box, EWK DN 25 shrink-wrapped on pallets. Comes with: As standard, four Screw Connection Kits with outside thread and one oval clamp fastening set comes packed with each EWK bundle.

Table with dimensions: DN DN 16 DN 20 DN 25

Article number DN16: 12001001 12001002 12001003

High-grade steel corrugated tube/rubber-insulated, 2xDN16-13 mm, by the metre High-grade steel corrugated tube/rubber-insulated, 2xDN16-13 mm, 10-m bundle High-grade steel corrugated tube/rubber-insulated, 2xDN16-13 mm, 25-m bundle

DN20: 12002000 12002002 12002003

High-grade steel corrugated tube/rubber-insulated, 2xDN20-13 mm, by the metre High-grade steel corrugated tube/rubber-insulated, 2xDN20-13 mm, 10-m bundle High-grade steel corrugated tube/rubber-insulated, 2xDN20-13 mm, 25-m bundle

DN25: 12002001 12002004 12002005

High-grade steel corrugated tube/rubber-insulated, 2xDN25-13 mm, by the metre High-grade steel corrugated tube/rubber-insulated, 2xDN25-13 mm, 10-m bundle High-grade steel corrugated tube/rubber-insulated, 2xDN25-13 mm, 25-m bundle

54

L x B cm 122 x 60 134 x 66 148 x 73

Description

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Tubing and insulating systems

S O L A R T E C H N I K

Flexible Solar Tubing Systems Thermoflex EW ◆ ◆ ◆ ◆ ◆ ◆

High-grade steel corrugated tube with low corrugation height Resistant to rust, acid, heat and vibration Very good flexibility and compression strength Simple design with detachable screwed connections Available in bundles up to 100 m Short lengths are promptly available from warehouse. Article nu. 12000002 12000003 12000004 12000005

Description High-grade steel corrugated tube, DN 16 by the metre High-grade steel corrugated tube, DN 16 25 m, bundle High-grade steel corrugated tube, DN 16 50 m, bundle High-grade steel corrugated tube, DN 16 100 m, bundle

Dimension (inches) 1/2 1/2 1/2 1/2

Lengths By the metre 25 50 100

12200001 122000011 122000012 122000013

High-grade steel corrugated tube, DN 20 by the metre High-grade steel corrugated tube, DN 20 25 m, bundle High-grade steel corrugated tube, DN 20 50 m, bundle High-grade steel corrugated tube, DN 20 100 m, bundle

3/4 1/2 1/2 1/2

Meterware 25 50 100

12200002 122000014 122000015 122000016

High-grade steel corrugated tube, DN 25 by the metre High-grade steel corrugated tube, DN 25 25 m, bundle High-grade steel corrugated tube, DN 25 50 m, bundle High-grade steel corrugated tube, DN 25 100 m, bundle

1 1/2 1/2 1/2

Meterware 25 50 100

Easy Drill Screw-Connection Kit Available as Screw-Connection Kit with outside thread, with solder end or as a coupling set Consists of: ◆ 1 coupling nut ◆ 1 spacer ring ◆ 1 Easy Drill washer ◆ 1 special-purpose seal ◆ 1 screw-in part with broad sealing surface Article number 11000116 11000120 11000013

Description Screw-Connection Kit with outer thread DN 16 Screw-Connection Kit with outer thread DN 20 Screw-Connection Kit with outer thread DN 25

Coupling nut (inches) 3/4 1 1 1/4

11000024 11000025 11000026

Screw-Connection Kit with solder-end DN 16 Screw-Connection Kit with solder-end DN 20 Screw-Connection Kit with solder-end DN 25

3/4 1 1 1/4

18 mm 22 mm 28 mm

11016012 11020034 11000030

Screw-Connection Kit, Coupling Set DN 16 Screw-Connection Kit, Coupling Set DN 20 Screw-Connection Kit, Coupling Set DN 25

3/4 1 1 1/4

3/4 Zoll 1 Zoll 1 1/4 Zoll

Subject to setting and printing errors. Prices do not include VAT.

Outer thread red. 1/2 Zoll 3/4 Zoll 1 Zoll

55

Tubing and insulating systems

S O L A R T E C H N I K

Flexible Solar Tubing Systems Protective hose for outdoor areas UV-resistant, weather- and raptor-proof Thickness: 1.5 mm Black Form of delivery: rolled in 10-m bundles Slit on one side for easy installation Maximum service temperature 135° C Elongation at tear 400 - 600%

◆ ◆ ◆ ◆ ◆ ◆ ◆

Article number 13300121

Description Protective hose for outdoor areas, universally split

Thermoflex EW for Underground Installation Two highly flexible high-grade steel corrugated tubes For house connections, distribution lines & connecting lines Insulation: rock wool , 0.037 W/mK, temperature-resistant to 250°C Sheathing tube: flexible corrugated PE-HD sheathing tube Integrated sensor cable, 4 x 0.5 mm² Fixed lengths according to reques

◆ ◆ ◆ ◆ ◆ ◆

Article number 11000216 11000220 11001225

Description High-grade steel corrugated tube for underground installation, DN 16 High-grade steel corrugated tube for underground installation, DN 20 High-grade steel corrugated tube for underground installation, DN 25

Plastic Cap for Thermoflex EW Sturdy plastic cap for a twin tubes with a hole lead-through for the sensor cable drawn in. ◆ Colour: white ◆ For both indoor and outdoor use. ◆

Article number 11000234 11000233 11000231 56

Description End Cap AUSTROFLEX EW SOLAR A 160 DN 2x16 End Cap AUSTROFLEX EW SOLAR A 160 DN 2x20 End Cap AUSTROFLEX EW SOLAR A 160 DN 2x25

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

S O L A R T E C H N I K

Subject to setting and printing errors. Prices do not include VAT.

57

Stoves

S O L A R T E C H N I K

Chopped Wood Stoves The GEO-TEC B 16-11 Stove is used in detached houses, properties of a similar size and as a single housing-unit stove. It impresses people with its timeless design and is also an eye-catcher. The visible flames it provides for in a sitting room convey a special room atmosphere. The GEO-TEC B 16-11 Stove has total output of 16kW, which is distributed to 11 kW in the water-bearing components and 5 kW on the air side.

Solar collectors

Solare Solar heating Heizungsuntersupport stützung Hot water heating system RoomRaumheizung

Kaltwasser Cold water

Bio 16-11

Stove door Combustion chamber Casing Ash container Fire box Fuel Total rated output Heating water output Air space output Exhaust gas temperature at rated output Water volume of the heat exchanger Max. operating pressure Fuel consumption at rated output Minimum chimney draught Minimum chimney size Weight Height/Width/Depth

Article number 700100 700101 58

With movable panel that prevents smoke from escaping while wood is being added. Lined all around with special, chemically bonded fireclay bricks Solid, welded boilerplate Thickness: 3-5 mm Volume: 13.5 litres Volume: 80 litres Wood to 20% moisture or wood briquettes 16 kW 11 kW 5 kW Approx 250° C 7.5 litres 3 bar 4.9 kg/h 15 Pa. 250 cm 220 kg 1030/570/510 mm

Description Woodburning Stove B 16/11 Regumat RTA

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Stoves

S O L A R T E C H N I K

Pellet Stove Saturn S7 The Saturn S7 impresses people with its optimum combination of a pellet boiler and a pellet stove. High-quality materials and very modern technology guarantee high performance and lasting reliability. Professional commissioning must be carried out to use the stove in optimum fashion. Only a valid commissioning certificate guarantees warranty claims. Total heat output, max. Total heat output, min. Output at max. Output at min. Flue gas outlet temperature at max. Flue gas outlet temperature at min. CO 13% O2 at min. and at max. CO2 at min. and at max. Exhaust gas mass at min. and at max. Minimum exhaust at max. output Minimum exhaust at min. output Capacity of the pellet container Pellet type Pellet consumption per hour Autonomy of operation Room heating capacity m3 Admission of combustion air Flue gas outlet Maximum current consumption Mains voltage and frequency Net weight Gross weight

7.5 kW / 6450 kcal/h 2.1 kW / 1806 kcal/h 84.2% (>80%) 82.7% (>80%) 170° C 120° C 0.056 - 0.026 % 3.7 % - 5,6 % 4.2 - 9.5 g/sec 0.12 mbar – 12 Pa 0.10 mbar – 10 Pa 52 l Pellets with 6-8 mm Ø, pellet size 5/30 mm Min. -0.6 kg/h* max.- kg/h* -1.7 kg/h* At min. - 28 h* at max. 10 h* 160/40 – 185/25 – 215/30** Outer diameter 50 mm Outer diameter 80 mm 270 watt 220 volts/50 Hz 112 kg 122 kg

Black

* These values may fluctuate depending on type and size of the pellets used. ** Room heating capacity depending on requirement Kal/m3

Silver

Article number 700300 700301 700302

Bordeauxred

Description Pellet Stove SATURN, Black Pellet Stove SATURN, Bordeaux red Pellet Stove SATURN, Silver

Subject to setting and printing errors. Prices do not include VAT.

59

Stoves

S O L A R T E C H N I K

Pellet Stoves, Hydro N21-18 The GEO-TEC N 21-18 impresses people with its optimum combination of a pellet boiler and a pellet stove. High-quality materials and very modern technology guarantee high performance and lasting reliability. An integrated water jacket makes it possible to also operate a heating system with the N 21-18. The heating output can be regulated from 5.4 to 21.5 kW, with efficiency of over 90%. Total heat output, max. Total heat output, min. Output: at max. Output: at min. Flue gas outlet temperature at max. Flue gas outlet temperature at min. CO 13% O2 at min. and at max. CO2 at min. and at max. Exhaust gas mass at min. and at max. Minimum exhaust at max. output Minimum exhaust at min. output Capacity of the pellet container Pellet type Pellet consumption per hour Autonomy of operation Room heating capacity m3 Admission of combustion air Flue gas outlet Maximum current consumption Mains voltage and frequency Net weight Gross weight

21.5 kW (18.490 kcal) / 16.2 kW (13.932 kcal)*** 6.2 kW (5.332 kcal) / 3.7 kW (3.182 kcal/h)*** 92 % (> 90%) 93 % (> 90%) 250° C 100° C 0.055 - 0.018% 5.5% - 11.9% 7.3 - 13 g/sec 0.12 mbar - 12 Pa 0.10 mbar - 10 Pa 52 l Pellets with 6 mm Ø pellet size 5/30 mm Min.-1 kg/h* max.-4 kg/h* At min.-33 h* at max. 9 h* 185/40 - 215/35 - 250/30** Ø 50 mm Ø 80 mm 270 watt 220 volts / 50 Hz 125 kg 135 kg

Bordeauxred

* These values may fluctuate depending on type and size of the pellets used. ** In Italy only pellets with a diameter of 6 mm may be used. *** Calorific values of 5180 Kcal/kg

Desert

Article number 700200 700201 700202 700203 60

Black

Salt & Pepper

Description Pellet Stove HYDRO, Bordeaux red Pellet Stove HYDRO, Black Pellet Stove HYDRO, Desert Pellet Stove HYDRO, Salt & Pepper

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Stoves

S O L A R T E C H N I K

Solar Active GEA Pellet Stoves The SOLAR ACTIVE Pellet Stove is the optimum modern-age stove with ACTIVE system for automatic air adjustment system, depending on the pellet type. Key data: Weight: 120 kg, fire tube connection: diameter 80 mm

Silver Total heat output, max. Total heat output, min. Output at max. Output at min. Flue gas outlet temperature at max. Flue gas outlet temperature at min. CO 13% O2 at min. and at max. CO2 at min. and at max. Exhaust gas mass at min. and at max. Minimum exhaust at max. output Minimum exhaust at min. output Capacity of the pellet container Pellet type Pellet consumption per hour Autonomy of operation Room heating capacity m3 Admission of combustion air Flue gas outlet Maximum current consumption Mains voltage and frequency Net weight Gross weight Article number 700500 700501 700502

Bordeauxred

8,7 kw / 7482 kcal/h 2,6 kw / 21,50 kcal/h 87,9 % (> 85%) 90,7 % (> 85%) 92°C 168°C 0.042 – 0.017 % 4,5 % – 8 % 4 – 7,7 g/sec 0,12 mbar – 12 Pa 0,10 mbar – 10 Pa 28 litres Pellets with 6 mm ø pellet size 5/30 mm Min. - 0,6 kg/h* max. - 2 kg/h* At min.-28h h* At max. 9 h* 187/40 – 214/35 – 250/30** Outer diameter 50 mm Outer diameter 80 mm 270 watt 220 volts/50 Hz 120 kg 140 kg

Black

Remote control with integrated thermostat

* These values may fluctuate depending on type and size of the ** Room heating capacity depending on requirement Kal/m3

Description Pellet Stove Solar ACTIVE GEA Black Pellet Stove Solar ACTIVE GEA Bordeaux red Pellet Stove Solar ACTIVE GEA Silver

Subject to setting and printing errors. Prices do not include VAT.

61

Trade Fair and Promotional Items

S O L A R T E C H N I K

Aluminium and High-grade Steel Collectors PVC Kit with mini-collector/fastening materials PVC kit with: ◆ 1 Mini-collector 210 x 310 mm ◆ High-grade steel or aluminium model or ◆ Installation materials

Article number 11000500 11000600 11000700

Description Mini-collector, aluminium Mini-collector high-grade steel Installation materials

Kollektor Schnittmodell für Messen Innenleben des Kollektors zum Teil sichtbar. Dieser Kollektor ist nur ein Schaustück und ist daher nicht funktionstauglich.

Titanium absorbers

Article number 77002003 500900 62

Description Cross-section model, aluminium Cross-section model, high-grade steel

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Solar Set

S O L A R T E C H N I K

We will put your Solar Set together for utility water heating support and/or heating support, doing so according to your particular requests.

Subject to setting and printing errors. Prices do not include VAT.

63

General Terms of Business

S O L A R T E C H N I K

of GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau

Our Terms and Conditions of Business below apply to all price quotes, contracts, deliveries and other performance. Any conditions by a Client differing from these, also including mere additional conditions, which we have not expressly approved in writing, shall be excluded, even if we have not expressly opposed such in the individual case.

1. Price quotes and acceptance of orders Our price quotations are subject to confirmation. Orders as well as any changes to orders placed with us shall be binding for the Buyer in all cases, irrespective of whether they are direct or via our sales representatives in the field. Orders and changes placed with us shall only become binding on our written confirmation of the order.

2. Prices All prices are ex works and, unless something else is agreed, are in without turnover tax (VAT), which shall be charged at the respective valid rate. All prices are current prices. For orders without an express price agreement, the prices for the day of delivery shall apply. We are entitled to make appropriate price increases if, after quoting a price, changes occur in the prices of raw materials or supplies, wages, salaries, freight or other public charges. Cash discounts, discounts and time allowed for payment shall require special agreement.

3. Delivery, passing of risk, shipping & packaging Deliveries are carried out ex our warehouse. Unless otherwise agreed in writing, shipping is carried out chargeable to and at the risk of the ordering party. Our deliveries shall be considered as carried out upon transfer to the Buyer, the haulage company or haulage contractor, or when notification is made of readiness for dispatch. Our deliveries are subject to correct deliveries on schedule by our front-end suppliers. Freight costs as well as the costs of any insurance for shipping that might be requested by the Buyer shall be chargeable to the Buyer. The execution of any special loading or shipping rules set by Buyers shall be carried out at the Buyer’s risk and expense. We shall be entitled to carry out partial performance to a reasonable extent. If in our opinion packaging is required, it shall be carried out in the manner usual in the trade always at the Buyer’s expense.

4. Time periods for and dates of delivery 1. Delivery dates specified should only be considered as approximate. Any agreement of fixed deadlines shall require our express confirmation to be effective. When a fixed deadline had been agreed, then the time period for delivery shall begin with the date of acceptance of the order, but not before complete clarification of all the details for its execution. If the Buyer is obliged to obtain any documents, specifications, permits or clearances, or to furnish a down payment, then the time period for delivery shall not begin until such obligations have been met. 2. If we are not able to deliver within the contractually agreed period of time, then, having set a grace period for us in writing of at least 14 days that threatens refusal, the Buyer may withdraw from the

64

contract subject to the provision in Para. 3. The Client shall only be entitled to claims for compensation in cases of damages due to delay or non-performance if the delivery has been delayed due to gross fault on the part of the contractor, a properly constituted agent or one of our managing salaried employees. 3. Any unforeseen circumstances, for which we are not responsible, such as force majeure, war, uprisings, lock-ins or lock-outs, strikes and lock-outs, difficulties procuring materials, operational interruptions, energy shortages, lack of means of transport and similar circumstances (also if such occur at front-end suppliers’) shall extend the delivery period commensurately, this being by at least the duration of the hindrance if such hinders us from meeting our commitments on time. If it is foreseeable that a delay in delivery will last longer than two months, then both parties shall be entitled to withdraw. Buyers may not derive any claims for damages from an extension of the time period for delivery, even in cases of withdrawal. We shall also not be responsible for the aforementioned circumstances if they develop during a delay already existing. In important cases, we will notify ordering parties as soon as possible about the start and end of such hindrances.

5. Payment 1. Unless otherwise agreed, our invoices are due and payable strictly net within 14 days as of the invoice date without any deductions. Before old invoices already due and payable from earlier deliveries are paid, no deductions will be granted on new invoices. 2. Bills of exchange will only be accepted with a relevant agreement and even then (as also with cheques) only on account of performance. Discount charges and other costs shall be borne by the drawee and must be immediately reimbursed. We shall not be liable for timely submission, protests, etc. What is more, accepting a bill of exchange shall not extend the term of payment of the purchase price. 3. From the time when due and payable on, 1% in interest after due date will be charged per month begun. If this clause should be ineffective, interest after due date is agreed in the amount of 10 % p.A. 4. In case of default on payment, we charge banking debit interest unless the Client proves that our damages are lower than this flat rate. At least the agreed interest after due date, however, shall be owed also after the default occurs. The assertion of claims for damages caused by default that are actually higher shall not be ruled out. 5. If the Client goes into default on payment or acceptance, all outstanding invoices shall immediately become due and payable. In case of non-compliance with payment obligations within the scope of the business relations or in case of a proven deterioration in the Client’s financial position, we shall be entitled to make any further work on the order as well as its delivery dependent on reasonable security or cash in advance. If our products have already been delivered, then we may demand immediate payment of the entire amount remaining regardless of the terms of payment agreed. This shall also apply if it should later emerge that the financial position had been substantially worse when the contract was concluded than we had assumed. If the security or advance payment are not provided within a reasonable time limit to be set by us, we shall be entitled to withdraw.

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Allgemeine Geschäftsbedingungen

S O L A R T E C H N I K

der GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau

6. The assertion of rights of lien or retention and set-offs against counterclaims shall be inadmissible unless the counterclaims have been legally established or accepted by us. 7. Payments shall always be credited to the oldest outstanding invoice or account receivable. The Buyer will be charged with any expenses arising in connection with bank transfers or based on documentary collection and documentary credit for our deliveries in the Buyer’s country or the country of destination.

terioration of assets is applied for or proceedings for such are instituted, we may furthermore demand that the Client: notify us both of the receivables assigned and of their debtor; provide all the information required to collect the receivables; hand over the pertinent documents and inform the debtors about the assignment. The Client furthermore authorises us already now for such a case as this to inform the buyers about the assignment of future claim. 6. We shall be under obligation to release our choice of the items of security given to us on demand by the Buyer if their value exceeds the receivables still existing vis-à-vis the Client by more than 20%.

6. Reservation of title 1. All merchandise and products we deliver are delivered only under reservation of title and extended reservation of title. The merchandise shall remain our property until full payment is made (in cases of payment by cheques and/or bills of exchange, until they are cashed) for all debts arising from the business relations, including accessory claims and claims for damages. This shall also apply if all or individual claims of ours are included in a current account, and the balance has been drawn and accepted. If a payment is made by a cheque/bill-of-exchange transaction (acceptor’s bill), the property shall not be transferred until the bill has been cashed without reservation. 2. The Client may neither pledge nor assign by way of security reserved merchandise (i.e. also merchandise that is still in our co-ownership after being connected, mixed or processed according to the following conditions). 3. If important contractual obligations are violated, in particular in case of default of payment, then, after a dunning procedure, we shall be entitled to take back the merchandise, the Buyer being under obligation to surrender such. Unless the Statute Covering Instalment Sales is applied, our taking back or seizing merchandise shall only imply withdrawal from the contract if we expressly declare this in writing. If, in case of default of payment, we exercise our right to take back merchandise and take back merchandise delivered under reservation of title, a credit for this shall only be made in the amount of 50% of the purchase price set off. The difference shall be for covering our expenses, such as freight costs, new marketing costs, packaging costs, etc. The Client shall retain the right to furnish proof of less damage. 4. The Client must immediately inform us about seizures or any other impending adverse effect on our rights by third parties, stating the details of the circumstances that enable intervention. 5. The Buyer shall be entitled to process or resell the reserved merchandise in the course of orderly business. The Client’s receivables arising from reselling the reserved merchandise are already now assigned to us as security for all of our claims arising from the business relation. We accept this assignment. If the reserved merchandise is sold with third-party merchandise either in a processed or unprocessed condition, the receivables shall only be considered as assigned in the amount of the invoice value of the reserved merchandise delivered by us. The Client shall be authorised to collect the receivables assigned, doing so for us in a fiduciary capacity. This authorisation to collect may be revoked if the Buyer does not properly fulfil its payment obligations arising from the contract on which they are based. If: payment is suspended; bankruptcy, composition proceedings in or out of court or any other de-

Subject to setting and printing errors. Prices do not include VAT.

7. Taking back merchandise In case merchandise is taken back that is subject to special agreements, no claim shall exist to the purchase price being paid back, but rather only to the delivery of replacement merchandise.

8. Make-and-hold orders Unless otherwise agreed for make-and-hold order, the merchandise must be completely called one year at the latest after being ordered. When one year is up we shall be entitled to charge for the merchandise, demanding its immediate payment. We shall furthermore be entitled to charge for the storage costs according to the rates in the haulage industry. The current price valid applicable on the date of delivery shall apply for make-and-hold orders.

9. Notices of defects, warranty & liability 1. The merchandise we deliver must be inspected on arrival without delay for proper quality, specific performance and completeness. Complaints must be made in writing. In cases of discernable defects, we must receive objections immediately after receipt of the merchandise. Defects which cannot be established with a proper commercial inspection must be asserted in writing within a time limit of three months after the ordering party receives the merchandise, with the right of recourse for defects being lost. We shall not take responsibility either for material defects caused by unsuited or improper storage, transport or manipulation, uses, incorrect installation or commissioning by the customer or third parties, usual wear, faulty or negligent handling or for any consequences of improper alterations or repair work carried out by the customer or third parties without our consent. The same shall apply to defects that reduce the value or suitability of the merchandise only to an insignificant degree. We must in any event be given opportunity to ascertain defects given notification of. Merchandise objected to must be sent back to us immediately on request. Claims arising from defects shall be lost if the customer does not fulfil these obligations or, without our approval, carries out alterations to merchandise already objected to. 2. In case of material defects, only reworking or replacements may be demanded. If reworking and/or replacement should fail, the Client shall be entitled to demand a lowering of the purchase price (reduction) or cancellation of the purchase contract (nullification of the sale).

65

Allgemeine Geschäftsbedingungen

S O L A R T E C H N I K

der GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau

3. Regardless of for what reason, we shall only be liable for grossly culpable behaviour by the Contractor itself, our executive bodies or our management employees. Any liability for slight negligence and all fault of vicarious agents shall be excluded. If there is some liability under our conditions, the compensation for damages may not exceed the loss incurred and the profit not realised, which the party having violated the contract, allowing for circumstances that it knew about or should have known about when the contract was concluded. 4. In cases of functional defects on collectors, for five years as of the issue date of the invoice from GEO-TEC we offer (free of charge ex works) replacement for materials which demonstrably have not met one of the requirements of the standard EN 12975. A function guarantee shall only be granted on collectors if all the main components of the collector system (fastening materials, pumping unit, frost protection, expansion tank, storage unit, control system and metal cladding) are from GEO - TEC and verification is furnished both of installation in technically correct fashion (in accordance with the state of the art) and regular maintenance by qualified personnel (maintenance contract with a specialised company licensed to do so). A ten-year guarantee shall be granted for systems in Austria if all the main components of the collector system (fastening materials, pumping unit, frost protection, expansion tank, storage unit, control system and metal cladding) are from GEO - TEC and verification is furnished both of installation in technically correct fashion (in accordance with the state of the art) and regular maintenance by qualified personnel (maintenance contract with a specialised company licensed to do so). Any liability shall, however, be ruled out for damage due to mechanical strain or changes resulting from influences caused by weather. Slight colour deviations or spoiling of the surface which have no influence on the collector’s functioning shall also be excluded from the warranty. What is more, no guarantee shall be assumed for glass breakage. Liability shall be excluded for damage due to force majeure and malfunctions attributable to improper assembly or installation of our products. No liability shall be assumed for any consequential damage due to defects.

5. If, after unsuccessful subsequent performance, the customer wants to withdraw from the contract due to a defect of title or material defect, it shall not be entitled to any claims for damages besides this due to the defect. If, after unsuccessful subsequent performance, the customer wants compensation for damages, the merchandise shall remain with the customer if this can be reasonably expected of it. The compensation for damages shall be limited to the difference between the purchase price and the value of the defective thing. This shall not apply if we have fraudulently caused the breach of contract. For individuals in business, the warranty is one year as of delivery of the merchandise. This shall not apply if the customer does not notify us about the defect in good time. Only the manufacturer’s product description is agreed as always defining the qualities of the merchandise. No public statements, recommendations or advertising by the manufacturer (for the product and/or individual components of it) shall constitute any additional contractual specifications of the qualities of the merchandise. If a customer is given defective installation instructions, we shall only be under obligation to deliver defect-free installation instructions, but only if the defect in the installation instructions stands in the way of proper installation. If a delivery of products made by us cannot be made by the date agreed due to reasons for which we are not responsible, then parts already manufactured shall, at the Buyer’s expense and risk, be set aside in storage space that is roofed over and guarded. In such case, the warranty shall begin when the merchandise is put into storage. As payment for this storage of manufactured merchandise, we charge 1% of the total order amount for each month of storage begun. These storage costs shall be due and payable at the end of each month of storage. In cases of simple and slight negligence, damage claims against us shall be limited to the value of the contract. The guarantees we make only apply vis-à-vis individuals in business. In case of any transferral of the guarantee there might be, a consumer should be expressly informed about this.

10. Partial inoperativeness

The preconditions for liability by GEO-TEC Solartechnik GmbH are that:

In any individual clauses of these conditions should be or become inoperative, the remaining agreements shall nonetheless remain operative.

• The installation was carried out according to the installation instructions in the respective valid version using the pertinent installation materials from the GEO-TEC organisation.

11. Place of fulfilment and legal venue

• The assembly was carried out by an authorised specialised company (heating engineer or fitter). • GEO-TEC and/or its representatives have been provided the opportunity to inspect complaints on site immediately after any such defects arise. • There is certification of proper commissioning (properly filled-in acceptance certificate). • An annual examination and maintenance has been carried out by a specialised company licensed to do so. The warranties set up by GEO-TEC shall only apply vis-à-vis contracted companies, and respective parties to a contract shall be under obligation both to inform end users of this fact and, on request, to confirm such in writing.

66

Only the court for A-9800 Spittal/Drau shall be competent for all present and future claims arising from the business relations with merchants who has been entered as a merchant in the commercial register, including claims based on bills of exchange and cheques. It is understood that Austrian law shall apply. The same legal venue shall apply if: the Client does not have a general legal venue domestically; it moves its residence or habitual residence abroad after concluding the contract; or its residence or habitual residence abroad is not known at the time an action is filed.

Status date: 1 January 2007

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Solar Collector Systems

S O L A R T E C H N I K

ALU 450 Q, Audi Plant 2005

Subject to setting and printing errors. Prices do not include VAT.

67

Trade Fair ISH 2007

68

S O L A R T E C H N I K

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Trade Fair ISH 2007

Subject to setting and printing errors. Prices do not include VAT.

S O L A R T E C H N I K

69

Absorber

S O L A R T E C H N I K

Titanium absorbers

Your partner for highly selective coatings In 1995 TiNOX GmbH was the first company to introduce to the market the newly developed, highly selective absorber coating for solar thermal collectors. This patented "blue" coating based on titanium and quartz set new performance standards and also provided an initial environmentally friendly alternative to the black chrome and black nickel coatings primarily in use back then. The TiNOX® titanium absorber coating is vaporised onto metal tape in a physical vacuum depositing (PVD) method, which it developed itself. Using an electron beam, titanium and quartz are vaporised in a vacuum chamber, which then react with nitrogen and oxygen to form TiNOX (titanium nitride oxide) and precipitate on the metal tape. The TiNOX® titanium absorber layer is abrasion-proof and can be processed into full-surface absorber panels and fins using all common joining methods (laser welding, plasma welding, ultrasound welding, soft soldering and reshaping). Its unique coat structure makes TiNOX® a highly selective absorber that has the following properties: ◆ A high degree of absorption (low reflection) within the visible light range 95% absorption ◆

A low degree of emission (high reflection) within the thermal radiation range 5 % emission

Maximum efficiency for solar thermal collectors 70

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Absorber

S O L A R T E C H N I K

Coating structure The base material used is a metal substrate with good reflection and thermal conduction. A thin titanium carbide compound is used as an adhesion layer and diffusion barrier. The absorber coating consists of a titanium compound with oxygen and nitrogen. This patented titanium oxynitride compound gave TiNOX its name. There is also an additional anti-reflex coating and protective coating made of quartz glass on the absorber layer. This minimisation of the surface reflection further optimises the absorption of solar radiation.

Nature and the Environment The components of the TiNOX coating are entirely safe for the human organism and the environment. TiNOX absorber coating is 100% recyclable. The metal in the absorber is entirely reusable.

Certified Performance and Long-term Stability The outstanding properties of TiNOX are confirmed by test certificates from independent testing institutes, which applies to the optical parameters of the absorption coefficient α and emission coefficient ε as well as the temperatureresistance and climate stability. Guarantee of the performance stability of TiNOX absorbers: To test the performance stability of selective absorber coatings, a testing method was developed in co-operation with various renowned research institutes. The so-called "Task X" Test (ISO draft proposal CD 12 952.2) simulates the influences of temperature and the environment which affect the selective coatings over many years of operation for the collector. The Task X Test guarantees at least 95% of the efficiency factor in new condition after a simulated period of use of 25 years.

The Original Blue is made of Titanium. Subject to setting and printing errors. Prices do not include VAT.

71

Notes

72

S O L A R T E C H N I K

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Let’s use the sun…

…for the

future of our children! S O L A R T E C H N I K

VILLACHERSTRASSE 95

•

A-9800 SPITTAL/DRAU

Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at