IP Dinamic merupakan ip yg tidak tetap, untuk konfigurasi ini membutuhkan DHCP server sebagai pemberi ip kepada setiap mesin komputer. Setting TCP/IP Dinamic 1. Click Start, Control Panel 2. Double-Click Icon Network Connection 3. CIick-kanan pada icon Local Area Connection, pilih properties 4. Double-Click Internet Protocol (TCP/IP) yang ada di dalam kotakdialog Local Area Connection, sampai keluar kotak dialog baru : Internet Protocol (TCP/IP) Protocol 5. Click opstain an IP adrees automatically 6. Click OK untuk menutup kotak dialog Internet Connection (TCP/IP) Properties. 7. Click OK untuk menutup kotak dialog “Local Area Connection Properties” 8. Click Start, Run, sampai keluar kotak dialog RUN, dan ketikkan CMD, click OK 9. Di kotak dialog CMD, ketikkan : ipconfig untuk melihat IP anddres anda. IP Static adalah ip yang dapat disetting sendiri sehingga alamatnya tetap atau tidak berubahubah. Setting TCP/IP Static 1. Click Start, Control Panel 2. Double-Click Icon Network Connection 3. CIick-kanan pada icon Local Area Connection, pilih properties 4. Double-Click Internet Protocol (TCP/IP) yang ada di dalam kotakdialog Local Area Connection, sampai keluar kotak dialog baru : Internet Protocol (TCP/IP) Protocol 5. Click use the following IP Address , Masukkan alamat IP. Misal alamat IP computer 1 adalah 192.168.1.1 dan komputer 2 adalah 192.168.1.2 dst, dengan subnet mask 255.255.255.0 6. Setelah setting TCP/IP ini telah dimasukkan, click OK untuk menutup kotak dialog Internet Connection (TCP/IP) Properties. 7. Click OK untuk menutup kotak dialog “Local Area Connection Properties” 8. Click Start, Run, sampai keluar kotak dialog RUN, dan ketikkan CMD, click OK 9. Di kotak dialog CMD, ketikkan : ipconfig untuk melihat IP anddres anda. 10. Lakukan test ping koneksi dengan computer sebelah (computer dengan ip address 192.168.1.2, 192.168.1.3, dsb), dengan mengetik pada command prompt: ping 192.168.1.2, jika sudah terhubung maka akan mendapat pesan reply.