CONTOURA® 300 SERIES
Four-Section Electric Profiling Beds
NESBIT EVANS Products Division
CONTOURA® 300 SERIES
• Easy to use • Enhanced safety • Effortless patient positioning • Increased patient independence • Enhanced protection from pressure ulcers • Modern, flexible design
Contoura 350 bed features a slatted mattress platform, patient handset and a safe working load of 180kg
Contoura 360 bed features a slatted mattress platform, patient handset, tilt and a safe working load of 180kg
Contoura 370 bed features a perforated dimple sheet mattress platform, patient and nurse handsets, tilt and a safe working load of 180kg
Contoura 390 bed features a perforated dimple sheet mattress platform, patient and nurse handsets, tilt and a safe working load of 230kg
EFFORTLESS PATIENT POSITIONING, INCREASED PATIENT INDEPENDENCE
One Button Trendelenberg
One Button Upright Positioning
(Contoura 360, 370 and 390)
(All Models)
A single button places the bed into a Trendelenberg
A single button on the handset effortlessly raises the patient into a comfortable upright position. This helps to reduce staff injuries and increase patient independence.
tilt position. This helps to reduce the risk of injury to staff and saves valuable time in an emergency.
ENHANCED SAFETY Exceptional Low Height The excellent low height of 38cm enhances the safety of both patients and carers. It allows easier downward transfers from wheelchairs, chairs etc. In addition, for patients who are at risk of falling and the use of safety sides is considered to be inappropriate, the bed can be left at its lowest height.
Optional integral bed extension with mattress retainer
Easy to clean - Smooth surfaces, removable head and foot ends
Manual CPR release (dual sided) for backrest
EASY TO USE
ENHANCED PROTECTION FROM PRESSURE ULCERS
Pro-Contour® Advance Profiling Conventional Beds
Auto-Contour A single button for: • Upright positioning
Contoura 300 Series
• Pro-Contour® Advance profiling • Intelligent profiling system
Pivot points Movements unique to Contoura 300 Series
Compared to a conventional profiling bed (A), the Pro-Contour Advance Profiling on the Contoura 300 Series of beds raises the pivot point of the backrest and thigh section closer to the client’s natural pivot point (their hip joint) (B). It mimics the way a person’s tissues stretch as they move from lying to sitting and reduces compression on the mattress surface at the seat section. This offers major benefits over conventional profiling beds: • Enhanced pressure, shear and friction reduction • Excellent postural support • Exceptional comfort
Intelligent Profiling System
Attendant Control Panel (ACP)
1 2
This allows the carer to selectively disable some or
2
all of the handset functions, enhancing patient safety whenever necessary.
Contoura 360 ACP shown above.
On descent, the knee-break stays raised until the backrest is semi-flat (1). Both the backrest and knee-break then descend together until they reach a flat position simultaneously (2). This is unique – on other beds the kneebreak descends regardless of backrest angle, which can result in the client sliding down the bed. The intelligent profiling on the Contoura 300 Series of beds maximises comfort and reduces pressure, shear and friction.
MODERN, FLEXIBLE DESIGN Moulded Head and Foot Ends
Blue
Laminate Head and Foot Ends
Pale Blue
Recessed Panel
Painted Bar (Standard)
Chrome Bar
Lilac
Peach
Green
Beech Effect
Blue
Mounted panel
Beech Effect
ACCESSORIES A wide range of accessories is available. A selection of these are shown below. For further details of these, or of the full range available, please contact Huntleigh Healthcare.
Clamp-on folding safety sides
Full length clamp on safety sides (for use with non-extending bed only)
Safety side pads
Lifting pole. Multi-position version also available
IV poles (Various)
Oxygen cylinder holder
Small traction assembly. Balkan beam also available
Syringe pump holder
FEATURES Electrically operated backrest, knee-break, height adjustment
350 360 •
Electrically operated Trendelenberg/Reverse Trendelenberg Patient handset with raised, embossed buttons
•
370 390
TECHNICAL DETAILS
•
•
•
Overall length
223cm (873/4”)
•
•
•
Overall length (extended)
236cm (93”)
Overall width
102cm (40”)
•
•
•
Patient & nurse handset with raised, embossed buttons Auto-Contour button
•
•
•
•
Pro-Contour Advance profiling
•
•
•
•
Mattress size (length x width)
198 x 86cm (78 x 34”)
Height range
38 - 79cm (143/4 - 31”)
Intelligent profiling system
•
•
•
•
Attendant control panel to lock out handset functions
•
•
•
•
Battery back-up
•
•
•
•
Retracting, rising backrest
•
•
•
•
Ratchet calf section adjustment
•
•
•
•
Dual-sided manual CPR levers for backrest
•
•
•
•
Slatted mattress platform
•
•
Safe working load of Contoura 390
230kg (507lbs)
•
•
Product weight without
113kg (249lbs)
safety sides
Perforated dimple sheet mattress platform Removable moulded head and foot ends with painted bar
•
•
•
•
Dual sided integral hooked drainage bag rails
•
•
•
•
Linked braking/steering system
•
•
•
•
150mm under-bed clearance for hoist access
•
•
•
•
125mm single-wheel castors
•
•
•
•
(•)
(•)
(•)
(•)
Trendelenberg range of
+12° / -8°
Contoura 360, 370 & 390 Backrest angle (maximum)
70°
Knee-break angle (maximum)
30°
Safe working load of
180kg (396lbs)
Contoura 350, 360 & 370
ELECTRICAL DETAILS Power in
2A max at 230V a.c 50/60 Hz
Bed stripper 150mm single-or twin-wheel castors
(•)
(•)
(•)
Electrical shock protection
Class 1, Type B
Liquid ingress protection
IP54
(•)
Integral bed extension with mattress retainer
(•)
(•)
(•)
(•)
Moulded plastic base cover
(•)
(•)
(•)
(•)
connected,
Integral folding safety sides
(•)
(•)
(•)
(•)
rechargeable,
Batteries
2 x 12V series
lead/acid gel
• Standard
(•) Optional
HUNTLEIGH HEALTHCARE LIMITED
1.2 amp hrs
Nesbit Evans Products Division 310-312 Dallow Road, Luton, Bedfordshire, LU1 1TD, United Kingdom T: +44 (0)1582 413104 F: +44 (0)1582 459100 E:
[email protected] Rental 24hr Helpline Lo-call T: 08457 342000 W: www.huntleigh-healthcare.com Registered No: 942245 England. Registered Office: As Above. ©Huntleigh Healthcare Limited 2006
® and ™ are trademarks of Huntleigh Technology PLC As our policy is one of continuous improvement, we reserve the right to modify designs without prior notice.
GENLIT 001/07 LIT 1042/01