Bt Computation Electrical.docx

First, get the wattage. Wattage = # of fixtures x given N Example, sa Circuit 1 ay may 11 kang pinlight/lighting at 3 droplight. Ang given N ay: Pinlight - x40 Droplight - x100 Convenience Outlet - x100 ACU outlet - x1500 (.75HP) or x2300 (1.5HP) Ref- x800 Range Outlet - x3500 Water Heater - x3000 Based on previous example Circuit 1 Amps would be expressed as: CKT1 Amps = (11x40) + (3x100) = 740 Next, get the amps using the formula: Amps = Wattage/Volts Given Volts by Sir Cueto is 230V (un ang susundin), so: Amps = 740/230 = 3.28 (rounded to the nearest 2 decimal places) Next, to get the Volt Amps, simply multiply the computed value of amps by the volts: V/A = 3.28x230 = 755 (rounded to the nearest whole number)

REQUIREMENTS FOR AUTOCAD 1 VICINITY MAP -location -site analysis (SWOT) -landmarks -roads(roadnames, street, direction) -orientation -exact address LOCATION MAP -additional details -orientation -exact address SITE DEVELOPMENT PLAN -orientation -lot bearing (distance, breaking point) -location of building (dimensions) -landscape (hardscape, softscape) -road roght of way -facilities (utilities, accessories) FLOOR PLAN (EXISTING/PROPOSED) -column grid lines -dimensions -elevations

-door and windows tags -section line ELEVATION AND SECTION -elevations -column grids -doors and windows tags and swings -dimensions ROOF PLAN -dimensions -arrow -column grid lines -down spout -building line LONG