Bmw X5
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Bmw X5 as PDF for free.
More details
- Words: 151
- Pages: 2
BMW Group - WebTIS
Page 1 of 2 37 22 540
Replacing air supply unit
Caution! After assembly, perform height setting offset, refer to BMW Diagnosis System. Extreme cleanliness must be ensured in area of air line connections during removal and installation. Even small dirt particles can cause leakage in the system.
Remove spare wheel. Release union screws and detach lines (upper arrows). If necessary, release cable ties. Installation:
refer to 37 13 ... Notes on assembly. Install lines with identical colors.
Rotate distributor block (1) through 45° and remove. Twist connector housing (2) through 45° and remove. Compress locking unit and remove connector.
Release screws/nuts, carefully turn air supply system over and set down towards front; if necessary, set down on a clean cloth. Do not kink air pipes. After completing work, adjust ride level height of vehicle.
http://na-prod.bmw-serviceweb.de/NA/webtis/show_doc/doc.html?infoobj_id=1056479
1/1/2004
BMW Group - WebTIS
http://na-prod.bmw-serviceweb.de/NA/webtis/show_doc/doc.html?infoobj_id=1056479
Page 2 of 2
1/1/2004
Page 1 of 2 37 22 540
Replacing air supply unit
Caution! After assembly, perform height setting offset, refer to BMW Diagnosis System. Extreme cleanliness must be ensured in area of air line connections during removal and installation. Even small dirt particles can cause leakage in the system.
Remove spare wheel. Release union screws and detach lines (upper arrows). If necessary, release cable ties. Installation:
refer to 37 13 ... Notes on assembly. Install lines with identical colors.
Rotate distributor block (1) through 45° and remove. Twist connector housing (2) through 45° and remove. Compress locking unit and remove connector.
Release screws/nuts, carefully turn air supply system over and set down towards front; if necessary, set down on a clean cloth. Do not kink air pipes. After completing work, adjust ride level height of vehicle.
http://na-prod.bmw-serviceweb.de/NA/webtis/show_doc/doc.html?infoobj_id=1056479
1/1/2004
BMW Group - WebTIS
http://na-prod.bmw-serviceweb.de/NA/webtis/show_doc/doc.html?infoobj_id=1056479
Page 2 of 2
1/1/2004
