Bat Wing

  • Uploaded by: Ankur Chawla
  • 0
  • 0
  • May 2020
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Bat Wing as PDF for free.

More details

  • Words: 385
  • Pages: 5
Batwing

Page 1 of 5

Batwing:

Technica data: Wingspan: Wing Area:

1000 mm ?

Total Weight: Fuselage Length: Motor: Requires:

? 800 mm 2 takt 6-8 ccm 3-channel radio with a V-tail mixer

design belongs to 'MBC Weert' www.mbcweert.nl Here you can download the bigger (on scale) pictures. batwing.zip (496 kb)

The batwing is based on an oval. The easiest thing to do is to get a piece of carton and use it as a mould, first you put two needles in the carton just like the picture beneath. Get a rope (about one meter long inclusive the noose) and put it between the needles. Put a pencil against the outside of the rope and draw an oval.

http://www.hilbren.nl/rcplans/planes/batwing/batwing.html

5/21/2009

Batwing

Page 2 of 5

draw two lines like the picture above, put two needles in the carton about 300mm from the left and the right of the midpoint. then get the rope and put it between the two needles, stretch the rope with a pecil and draw the outher limits of the rope (see the blue lines in the picture above). Now you have an oval you can draw the other lines see for examples the picture below and if you want a on scale picture then download the zipfile . The plane is made from 20mm tick "roofmate" (thats what the call it here in the netherlands), you can get this foam probbebly in every "do it your self-store". Use a saw or a very sharp knive to saw/cut the foam (I should use a knife because it's more precisely and it gives a better result). To give the foam more stiffness you can put a some foil on the foam. In the middle of the plane there two plates on the top and on the bottom of the plane. Both from 10mm thick balsa. the plate on the bottom is for the ruders.

http://www.hilbren.nl/rcplans/planes/batwing/batwing.html

5/21/2009

Batwing

Page 3 of 5

There's been made a box for the electronics for details see the picture below.

http://www.hilbren.nl/rcplans/planes/batwing/batwing.html

5/21/2009

Batwing

Page 4 of 5

And a picture from the left side of the plane, you can see the electronic-box on the bottom of the plane.

http://www.hilbren.nl/rcplans/planes/batwing/batwing.html

5/21/2009

Batwing

Page 5 of 5

And here are some more foto's

© Copyright 2001, Modelbouwclub Weert.

http://www.hilbren.nl/rcplans/planes/batwing/batwing.html

5/21/2009

Related Documents

Bat Wing
May 2020 15
Wing-wing
October 2019 37
Wing
November 2019 44
Wing
May 2020 17
Wing
May 2020 25
Bat
November 2019 36

More Documents from ""

Bat Wing
May 2020 15
Simran Project-1.docx
December 2019 23
Law On Mediation
August 2019 29