Bachelor Of Science In Marine Engineering.docx

Dr. Yanga’s Colleges Inc. Wakas, Bocaue, Bulacan

COLLEGE OF MARITIME EDUCATION BACHELOR OF SCIENCE IN MARINE ENGINEERING

MAINT LABORATORY ACTIVITY NO. 1 DEMONSTRATE THE SAFETY MEASURES IN THE HAZARDOUS AREA AND ELECTRICAL EQUIPMENT

STCW CODE REFERENCE Competence/s KUP Course Outcomes

Intended Learning Outcome

Table A-III/1 , Maintenance and repair at the operational level A-III/1.F3.C1: Appropriate use of hand tools, machine tools and measuring instrument for fabrication and repair on board. A-III/1.F3.C1. KUP4 : Methods for carrying out safe emergency and temporary repair. The graduate of the BSMARE program shall have acquired the knowledge and competence necessary to perform the following: a) Demonstrate the ability to undertake at the operational level , the tasks , duties and responsibility listed in the column of table A-III/1 Section A-II/1 of the STCW Codes. Locate and use relevant data source manual and drawing.

Name:

Year / Section

Date Performed: Date Submitted:

Prepared by:

Checked and Reviewed by:

C/E VERENO B. BORILLO JR

Faculty

3/E NEMESIO S. SORILLA Assessor

Verified by:

Approved by:

C/E RENATO O. BITERANTA

C/M ELADIO F. SOLIS SR. Dean, CME

Program Head

I. Objectives: 1. Demonstrate the use of maintenance system , like PC – based data. 2. Participate in a survey of running machinery. 3. Describe how items of spare gear are maintain in good condition II. Tools, Materials and Equipment / Protective clothing: Manual or Books Drawing plan Main Engine Generator Boiler Electrical Room Megger test

Cover all Lighting Helmet Leather gloves/ apron Safety Shoes Safety goggles

III. Procedures: 1. Provide all materials, tools ,equipment and protective clothing to be needed while performing such activities. 2. Demonstrate the proper use of protective clothing and dangerous tools. 3. Apply the safety measures while doing such activities in the area. 4. Identify the Personal protective Equipment and Clothing. 5. Demonstrate the proper usage of first – aid box and each content of medicine. NOTE: Appropriate knowledge of safety measure to be carried out while doing such activities to avoid any injuries. IV. Assessment: PERFORMANCES 1. Correct usage of personal protective clothing and equipment. 2. Demonstrate the proper usage of the first-aid box, and each content. 3. Apply careful attitude while working on any task. 4. Explain the appropriate lighting, ventilation and exhaust fan. V. Rubrics Equivalent Grade 4 – Able to demonstrate correctly without supervision 3 – Can demonstrate with minimal supervision 2 – Can demonstrate with supervision 1 – Cannot demonstrate VI. COMPTENCY 50% and above = COMPETENT 49% and below = NOT YET COMPETENT VII. Ratings:

Remarks:

4

3

2

1

Dr. Yanga’s Colleges Inc. Wakas, Bocaue, Bulacan

COLLEGE OF MARITIME EDUCATION

BACHELOR OF SCIENCE IN MARINE ENGINEERING MAINT LABORATORY ACTIVITY NO. 2-3

DEMONSTRATE THE SAFETY MEASURES IN THE HAZARDOUS AREA AND ELECTRICAL EQUIPMENT

STCW CODE REFERENCE Competence/s KUP

Course Outcomes

Intended Learning Outcome

Table A-III/1 , Maintenance and repair at the operational level A-III/1.F3.C2 – Maintenance and repair of shipboard machinery and equipment. A-III/1.F3.C2 KUP 1 – Safety measures to be taken for repair and maintenance including the safe isolation of shipboard machinery and equipment required before personnel are permitted to work on such machinery equipment. Upon completion of the course the student shall be able to deal with maintenance and repair at operational level particularly the use of relevant data sources , manual , and drawings , undertake maintenance to the main engine , auxiliary engine , boiler and repair to plant electrical and emergency equipment. Determine the safety precaution in maintaining the electrical equipment.

Name:

Year / Section

Date Performed: Date Submitted: Prepared by: C/E VERENO B. BORILLO JR Faculty

Verified by: C/E RENATO O. BITERANTA Program Head

Checked and Reviewed by: 3/E NEMESIO S. SORILLA Assessor

Approved by: C/M ELADIO F. SOLIS SR. Dean, CME

I. Objectives: 1. Demonstrate the use of electrical measuring instrument in hazardous area. 2. Demonstrate an understanding of safe working practice procedure. 3. Classify the identifiable and non – identifiable hazard in the workplace. 4. Discuss the importance that a careful attitude is necessary when working on a task.

II. Tools, Materials and Equipment / Protective clothing: Main switch board Electrical flier/ cutter Control panel board Safety shoes Electrical area Overhaul all Megger test Electrical tape Tester Leather gloves III. Procedures: 1. Provide all materials, tools ,equipment and protective clothing to be needed while performing such activities. 2. Demonstrate the proper use of protective clothing and dangerous tools. 3. Apply the safety measures while doing such activities in the area. 4. Identify the Personal protective Equipment and Clothing. 5. Demonstrate the proper usage of first – aid box and each content of medicine. NOTE: Appropriate knowledge of safety measure to be carried out while doing such activities to avoid any injuries. IV. Assessment: PERFORMANCES 1. Correct usage of personal protective clothing and equipment. 2. Demonstrate the proper usage of the first-aid box, and each content. 3. Apply careful attitude while working on any task. 4. Explain the appropriate lighting, ventilation and exhaust fan. V. Rubrics Equivalent Grade 4 – Able to demonstrate correctly without supervision 3 – Can demonstrate with minimal supervision 2 – Can demonstrate with supervision 1 – Cannot demonstrate VI. COMPTENCY 50% and above = COMPETENT 49% and below = NOT YET COMPETENT VII. Ratings:

Remarks:

4

3

2

1