Autoclave Mapping.pdf
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Autoclave Mapping.pdf as PDF for free.
More details
- Words: 226
- Pages: 2
HARDWARE SOFTWARE SERVICE
Expert autoclave et stérilisation - Autoclave and sterilisation expert
Autoclave mapping Qualify your equipment
➜ Assurance of thermal homogeneity ➜ Search of the cold spot ➜ Validation of maintenance work on your equipment
High temperature zone
Cold spot
HARDWARE SOFTWARE SERVICE
Expert autoclave et stérilisation - Autoclave and sterilisation expert
Autoclave mapping Qualify your equipment
Objective Identify the cold spots on your equipment Comply with the specifications of your clients (certifiers, major distributors, food industry key players
Methodology On-site evaluation: • Definition of zones considered to be "critical" • Workshop studies Test phases: Optimised spread of 5 sensors per basket • Temperatures, pressures and rotations reading at each key stage • Measurement repetition Validation process: • Measurement of two cycles with full load • Observation and interpretation of values obtained • Customisation of protocol possible
Commitments Compilation of a report covering all requirements of the client within 30 days Comparison of results with acceptance criteria Optimisation recommendations: - setting parameters - reconstruction of scales - loading plan
35, tel
rue fontevrault
- 72200
+33 (0) 243 960 378 -
la flèche
fax
-
france
+33 (0) 243 960 384
e-mail : [email protected] - www.axitherm.com PLC with a capital of €15,245, registered at the RCS du Mans 441 004 553 00026 - code APE 8299 Z European VAT number FR 19 441 004 553
Expert autoclave et stérilisation - Autoclave and sterilisation expert
Autoclave mapping Qualify your equipment
➜ Assurance of thermal homogeneity ➜ Search of the cold spot ➜ Validation of maintenance work on your equipment
High temperature zone
Cold spot
HARDWARE SOFTWARE SERVICE
Expert autoclave et stérilisation - Autoclave and sterilisation expert
Autoclave mapping Qualify your equipment
Objective Identify the cold spots on your equipment Comply with the specifications of your clients (certifiers, major distributors, food industry key players
Methodology On-site evaluation: • Definition of zones considered to be "critical" • Workshop studies Test phases: Optimised spread of 5 sensors per basket • Temperatures, pressures and rotations reading at each key stage • Measurement repetition Validation process: • Measurement of two cycles with full load • Observation and interpretation of values obtained • Customisation of protocol possible
Commitments Compilation of a report covering all requirements of the client within 30 days Comparison of results with acceptance criteria Optimisation recommendations: - setting parameters - reconstruction of scales - loading plan
35, tel
rue fontevrault
- 72200
+33 (0) 243 960 378 -
la flèche
fax
-
france
+33 (0) 243 960 384
e-mail : [email protected] - www.axitherm.com PLC with a capital of €15,245, registered at the RCS du Mans 441 004 553 00026 - code APE 8299 Z European VAT number FR 19 441 004 553
Related Documents
Autoclave
June 2020 2
Taller Autoclave
June 2020 2
Esterilizacion Autoclave
November 2019 14
Autoclave Mapping.pdf
October 2019 6