Authentification Lm Ntlm Windows

Philippe Logean

17 avril 2003

Authentification Windows 2000

1

Objectifs.................................................................................................................................................2

2 2.1 2.2 2.3

Stockage des mots de passe sur Win2k.............................................................................................2 SAM ....................................................................................................................................................2 Active Directory (AD) ..........................................................................................................................2 SYSKEY..............................................................................................................................................2

3 Authentification réseau (Netlogon) .....................................................................................................4 3.1 LM, NTLM et NTLMv2 ........................................................................................................................4 3.1.1 LanManager (LM) ...............................................................................................................................5 3.1.2 NTLM ..................................................................................................................................................6 3.1.3 NTLMv2 ..............................................................................................................................................7 3.1.4 Tableau récapitulatif ...........................................................................................................................8 3.2 Kerberos .............................................................................................................................................8 3.3 NTLM ou Kerberos ? ........................................................................................................................10 4 4.1 4.2 4.3 4.4

Mesure pour augmenter la sécurité des password .........................................................................12 Désactivé LM et NTLM .....................................................................................................................12 Forcer l’utilisation de Kerberos .........................................................................................................13 Suppression de la SAM de secours..................................................................................................13 Suppression des hash LM dans la SAM et AD.................................................................................13

5 Attaques...............................................................................................................................................14 5.1 Interception des paquets challenges – responses ...........................................................................14 5.1.1 L0phtCrack 4 (LC4) ..........................................................................................................................14 5.1.2 ScoopLM et BeatLM .........................................................................................................................14 5.2 Attaque des échanges Kerberos ......................................................................................................14 5.3 Accès à la SAM ................................................................................................................................15 5.4 Extraction des informations du fichier SAM......................................................................................15 5.5 Décryptage des hashs des mots de passe.......................................................................................16 5.6 Suppression du password administrateur ........................................................................................17 6

Conclusion...........................................................................................................................................18

7

Sources ................................................................................................................................................18

8

Annexes ...............................................................................................................................................19

Laboratoire de transmission de données / EIG

1

Philippe Logean

1

17 avril 2003

Objectifs Windows 2000 (Win2k) implémente plusieurs protocoles d’authentification réseau. Le protocole utilisé par défaut est Kerberos v5. Mais pour des raisons de compatibilité avec les versions précédentes de Windows, Win2k support les protocoles issus de LanManager (LM, NTLM, NTLMv2). Les buts de ce document sont de : • Montrer où et comment sont stockés les passwords. • Illustrer les différents mécanismes d’authentification réseau (Netlogon). • Comprendre les vulnérabilités et mettre en œuvre des attaques permettant d’obtenir des passwords. • Appliquer les mesures pour limiter les chances de réussite de ces attaques.

2

Stockage des mots de passe sur Win2k

2.1

SAM Sur les machines W2k Pro et Serveur, la SAM (Security Accounts Manager) est l’élément qui contient les noms des utilisateurs et les hashs des passwords de tous les utilisateurs d’un système local (comptes locaux). Ces informations sont stockées dans le fichier %systemroot%\system32\config\SAM (<100ko). Ce fichier représente l’entrepôt de stockage physique des données spécifiées dans la base de registre HKEY_LOCAL_MACHINE\SAM. Il est verrouillé par le système d’exploitation, donc n’est pas lisible ni par les utilisateurs et ni par l’administrateur. Il est toutefois récupérable en bootant le machine à l’aide d’un autre OS compatible avec le système de fichier (Disquette Dos + NTFSDOS). Il y a 2 types de hash de mots de passes stockés dans la SAM : • Lan Manager compatible • NTLM compatible

2.2

Active Directory (AD) Le contrôleur de domaine (DC) d’un domaine Win2k, contient tous les noms des utilisateurs et les hashs des passwords de tous les utilisateurs du domaine (compte de domaine). Ces éléments ne sont pas stockés dans la SAM, mais dans Active Directory (AD). AD ce trouve dans le fichier %windir%\NTDS\ntds.dit (~10Mo). Comme pour la SAM, ce fichier est verrouillé par le système d’exploitation, donc n’est pas lisible par les utilisateurs. De plus, sa grande taille le rend difficilement récupérable en utilisant une simple disquette de boot Dos. Le DC possède aussi une SAM, mais celle-ci n’est pas utilisée par le système. Lorsqu’un serveur devient DC, les comptes utilisateurs qui existaient dans la SAM sont copiés dans AD. La SAM du DC est remplacée par une SAM basique (SAM d’origine) contenant les comptes Administrator et Guest. Ces comptes ne sont pas utilisés par le système et n’ont rien à voir avec les comptes Administrator et Guest se trouvant dans AD.

2.3

SYSKEY SYSKEY ajoute un niveau supplémentaire d’encryptions aux hashs des passwords stockés dans la SAM ou dans AD. Par défaut, cette fonction est activée sur Win2k. Ainsi, des programmes comme L0phtCrack ou pwdump ne sont pas capables de récupérer les hashs des passwords dans une SAM extraite d’une machine. Par contre, pwdump2 est capable de contourner SYSKEY (Voir § 5.4). SYSKEY établit une clé de cryptage de 128 bits. Par défaut, cette clé est stockée localement par le système. Si le système requière un haut niveau de sécurité, il est possible de stocker la clé sur une disquette ou de la remplacer par un password. Cette disquette ou ce password est nécessaire pour booter la machine.

Laboratoire de transmission de données / EIG

2

Philippe Logean

17 avril 2003

Pour modifier l’emplacement de la clé : Start – Run… - syskey - Update Si cette option est sélectionnée, la clé utilisée par SYSKEY est issue à partir d’un password. Ce password est demandé lors de chaque boot de la machine. Si cette option est sélectionnée, la clé utilisée par SYSKEY est stockée sur une disquette. Cette disquette est demander lors de chaque boot de la machine. Si cette option est sélectionnée, la clé utilisée par SYSKEY est stockée sur le système (défaut).

Laboratoire de transmission de données / EIG

3

Philippe Logean

3

Authentification réseau (Netlogon)

3.1

LM, NTLM et NTLMv2

17 avril 2003

Win2k a hérité de plusieurs protocoles d’authentification réseaux, pour des raisons de compatibilité avec les versions précédentes de Windows. Le plus ancien est LanManager (LM) développé par IBM et utilisé dans les versions précédant Windows NT. Windows NT a introduit NTLM qui supprime certaines vulnérabilités de LM. La dernière évolution, NTLMv2, est apparue avec Windows NT SP4. Comme nous le verrons plus bas, les principales différances entre ces trois modes d’authentifications sont les algorithmes utiliser pour le calcul des hashs. Entre deux postes Win2k, ces trois modes d’authentifications fonctionnent selon le principe du « challenge/response » illustré ci-dessous :

SAM Secret partagé (hash du password utilisateur) ou AD Utilisateur

Password utilisateur 5

WinLogon

Hash du password utilisateur, de la SAM ou AD

Serveur ou DC

Client

Hash du password 1 2 3 Challenge

Negotiate Protocol Request Negotiate Protocol Response NTLMSSP Negotiate NTLMSSP Challenge: Challenge du serveur

4

Chiffrage du challenge avec hash du password utilisateur

Chiffrage du challenge avec hash du password 6

Réponse C

Challenge

7

10

NTLMSSP Auth: Réponse (Username (Plaintext) + Réponse LM + NTLM) Success: User ID

Réponse C

Réponse S

OK: Réponse C = Réponse S

8 9

Remarque : La capture de cet échange se trouve dans l’annexe 1. 1. Envoi d’un « SMB Negotiate Protocol » contenant la liste des dialectes supportés. Le flag « Extanded Security Negotiation » est à 1. Cela signifie l’utilisation de NTLMSSP. 2. Réponse avec indice du dialecte à utiliser. Avec des postes Win2k, la valeur de l’indice est de 5. 3. Demande de session et négociation des options NTLMSSP. 4. Un challenge (nombre aléatoire de 8 bytes) est générer par le serveur et envoyé au client. 5. L’utilisateur entre son Username et son password. Le hash du password est généré. 6. Le challenge est chiffré à avec le hash du password. Pour des raisons de compatibilité avec les versions précédentes de Windows, cette opération est effectuée deux fois avec LM et NTLM. 7. La réponse contient les deux challenges chiffrés et le Username en clair. 7. Grâce à ce Username, le serveur récupère, dans la SAM, le hash du password lui correspondant. Le serveur chiffre à son tour le challenge à l’aide de ce hash. 9. Le serveur compare le résultat obtenu à celui reçu du client. S’ils sont identiques, le client est authentifié. 10. Le serveur envoie un User ID nécessaire pour permettre l’accès aux données. Remarque : NTLMSSP (NTLM Security Support Provider) est utilisé uniquement entre des postes Win2k ou supérieur. Si l’authentification est faite avec un poste plus ancien, le challenge est envoyer dans le paquet « Negotiate Protocol Response ». Il n’y a donc que 4 échanges au lieu de 6. Laboratoire de transmission de données / EIG

4

Philippe Logean

3.1.1

17 avril 2003

LanManager (LM) La figure ci-dessous illustre le fonctionnement de LM : Password[1..14]

1

a b c d e

A B C D E F G H

DES key 1 (password[1..7])

3

g h

i

j

k

l m n

I

J K L M N

Password uppercase[1..14]

2

4

f

DES key 2 (password[8..14])

A B C D E F G

H

I

J K L M N

Magic_word[1..8]

4b 47 53 21 40 23 24 25

DES

5

6

7

LM_hash[1..8]

Key

LM_hash[9..14]

Q Q Q Q Q Q Q Q

R R R R R R R R

Concatenation[1..21]

(Padding)

Q Q Q Q Q Q Q Q R R R R R R R R 00 00 00 00 00

Concatenation[1..7] 8

DES

Key

Concatenation[8..14]

Q Q Q Q Q Q Q

Concatenation[15..21]

Q R R R R R R

R R 00 00 00 00 00

DES

DES

Challenge[1..8] 9

T T T T T T T T

10

11

DES

Key

LM_response[1..8]

X X X X X X X X

12

Key

LM_response[9..16]

Key

LM_response[17..24]

Y Y Y Y Y Y Y Y

Z Z Z Z Z Z Z Z

LM_response[1..24]

X X X X X X X X Y Y Y Y Y Y Y Y Z Z Z Z Z Z Z Z

1.

Le password de l’utilisateur peux être au maximum de 14 caractères. S’il fait moins de 14 caractères, des « 0 » sont ajoutés (padding).

2.

Le password est mis en majuscule (non case-sensitive).

3.

Il est divisé en deux parties de 7 bytes qui serviront de clé.

4.

LM utilise une constante de 8 bytes (0x4b 0x47 0x53 0x21 0x40 0x23 0x24 0x25).

5 & 6. La constante est chiffrée avec l’algorithme DES (ECB mode) à l’aide de la clé issue du password. Cette opération est effectuée pour les deux clés. 7.

Les deux résultats du chiffrement sont concaténés. 5 bytes de « 0 » y sont ajouter (padding) pour obtenir un total de 21 bytes.

8.

Cette concaténation est divisée en trois parties de 7 bytes.

9.

Challenge envoyé par le serveur (8 bytes).

10 & 11. Le challenge est chiffré avec l’algorithme DES (ECB mode) à l’aide des clés issues de la concaténation. Cette opération est effectuée pour les trois clés. 12. Les trois résultats du chiffrement sont concaténé pour créer la réponse de 24 bytes qui est retourné au serveur.

Laboratoire de transmission de données / EIG

5

Philippe Logean

3.1.2

17 avril 2003

NTLM La figure ci-dessous illustre le fonctionnement de NTLM : Password[1..n] (unicode)

1

a b c d e

f

g h

i

j

k

l m n

MD4

2

R R R R R R R R R R R R R R R R

Concatenation[1..21]

3

4

NTLM_hash[1..16]

(Padding)

R R R R R R R R R R R R R R R R 00 00 00 00 00

Concatenation[1..7]

Concatenation[8..14]

R R R R R R R

Concatenation[15..21]

R R R R R R R

R R 00 00 00 00 00

DES

DES

Challenge[1..8] 5

T T T T T T T T

6

7

DES

Key

LM_response[1..8]

X X X X X X X X

8

Key

LM_response[9..16]

Key

LM_response[17..24]

Y Y Y Y Y Y Y Y

Z Z Z Z Z Z Z Z

LM_response[1..24]

X X X X X X X X Y Y Y Y Y Y Y Y Z Z Z Z Z Z Z Z

1.

Le password de l’utilisateur est codé en Unicode (case-sensitive). Il peut avoir jusqu'à 127 caractères, mais au-delà de 14, il n’est plus compatible avec les versions de Windows 9x.

2.

Le hash NTLM de 128 bits est obtenu avec l’algorithme MD4.

3.

5 bytes de « 0 » sont ajouter au hash (padding) pour obtenir un total de 21 bytes.

4.

Cette concaténation est divisée en trois parties de 7 bytes.

5.

Challenge envoyé par le serveur (8 bytes).

6 & 7. Le challenge est chiffré avec l’algorithme DES (ECB mode) à l’aide des clés issues de la concaténation. Cette opération est effectuée pour les trois clés. 8.

Les trois résultats du chiffrement sont concaténé pour créer la réponse de 24 bytes qui est retourné au serveur.

Remarque : Aucune explication claire sur le fonctionnement de l’algorithme NTLM n’a été trouvée. La figure ci-dessus est donc une hypothèse faite à partir du tableau décrit sur le slide 15 du document « Cracking NTLMv2 Authentication » [CrNtlmPpt] .

Laboratoire de transmission de données / EIG

6

Philippe Logean

3.1.3

17 avril 2003

NTLMv2 La figure ci-dessous illustre le fonctionnement de NTLMv2 : Password[1..n] (unicode)

1

a b c d e

f

g h

i

j

k

l m n

MD4

NTLM_hash[1..16] 2

3

R R R R R R R R R R R R R R R R

unicode(uppercase(account_name) + domain_or_hostname) HMAC_MD5 Key

5

4

Challenge[1..8]

T T T T T T T T

[1..16]

Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y

6

Server_challenge + Client_challenge HMAC_MD5 Key

NTLMv2_response[1..16] 7

X X X X X X X X X X X X X X X X

1.

Le password de l’utilisateur est codé en Unicode (case-sensitive). Il peut avoir jusqu'à 127 caractères, mais au-delà de 14, il n’est plus compatible avec les versions de Windows 9x.

2.

Le hash NTLM de 128 bits est obtenu avec l’algorithme MD4.

3 & 4. Une clé de 128 bits est créée en effectuant un HMAC sur la concaténation du username et du nom du domaine (ou du hostname) en utilisant le hash NTLM comme clé. 5.

Challenge envoyé par le serveur (8 bytes).

6 & 7. Le challenge du serveur et un challenge du client sont hashé avec la fonction HMAC en utilisant la clé de 128 bits générés précédemment. Le hash obtenu est retourné au serveur comme réponse. Remarques : Le challenge du client n’a pas été identifié lors de l’analyse des échanges entre client et serveur. Lors de l’analyses des captures (annexes 3 - 5) on constate que la longueur de la réponse n’est pas de 16 bytes (128 bits) mais de 92 bytes. La zone grisée ci dessous représente la réponse NTLMv2 (NTLM Response: 48C25F6F31D2C1757CA336B73A089E2E...). On constate que le nom du serveur (v24) est ajouter à la suite du hash. 00e0 00f0 0100 0110 0120 0130 0140

5e 75 00 7b 00 00 00

c9 7c 50 00 06 34 00

da a3 2a 00 00 00 00

32 36 92 00 56 03 00

f3 b7 5f 00 00 00 00

a2 3a 33 02 32 06 3e

ef 08 de 00 00 00 93

0f 9e c2 06 34 76 3e

7b 2e 01 00 00 00 be

48 01 c9 56 04 32 4b

c2 01 da 00 00 00 e9

5f 00 32 32 06 34 8a

6f 00 f3 00 00 00 2b

31 00 a2 34 76 00 a1

d2 00 ef 00 00 00 66

c1 00 0f 01 32 00 bf

^..2....{H._o1.. u|.6.:.......... .P*._3.....2.... {........V.2.4.. ...V.2.4.....v.2 .4.....v.2.4.... .....>.>.K..+.f.

Laboratoire de transmission de données / EIG

7

Philippe Logean

3.1.4

17 avril 2003

Tableau récapitulatif Le tableau ci-dessous réunit les principales caractéristiques des trois modes d’authentification. LM Password max length Password case sensitive Hash key length Password hash alogorithm Hash value length C/R key length C/R algorithm C/R length

2x7 char non 56bit + 56bit DES (ECB mode) 64bit + 64bit 56bit + 56bit + 16bit DES (ECB mode) 64bit + 64bit + 64bit

NTLM

NTLMv2 127 char * oui MD4 128bit 128bit HMAC_MD5 128bit

127 char * oui MD4 128bit 56bit + 56bit + 16bit DES (ECB mode) 64bit + 64bit + 64bit

Remarque : * Si le password est plus grand que 14 caractères, il n’est pas compatible avec les versions de Windows 9x. 3.2

Kerberos Kerberos (RFC 1510) est le protocole d’authentification par défaut utiliser entre des systèmes Win2k faisant parti d’un même domaine. Les avantages de ce protocole sont : • Aucun password (ou hash) chiffré ne circule sur le réseau • Protocole permettant l’authentification mutuelle d’entités • Architecture Single Sign On Kerberos repose sur l’utilisation de clés symétriques (symmetrical key) ainsi que sur des clés de session (session key) qui permettent au client et au serveur Kerberos de dialoguer avec des messages cryptés. Kerberos utilise le cryptage DES (Data Encryption Standard). Le cœur du system est le serveur Kerberos. Le serveur Kerberos aussi appelé KDC (Key Distribution Center) est le centre de distribution de clé qui accepte les requêtes de tickets émanant des clients. Il comprend le service d’authentification (AS) ainsi que le service de délivrance des tickets (TGS). Le KDC possède une base de donnée pour établir la correspondance entre un client et sa clé. Pour Win2k, cette base de donnée est AD. La clé d’un utilisateur, qui est le secret partagé, est obtenue à partir d’une fonction de hachage MD5 sur son mot de passe. La figure ci dessous illustre le processus d’authentification d’un client désirant accéder à un serveur :

Secret partagé (hash du password utilisateur)

DC (KDC)

Utilisateur

AD

Password utilisateur 1

WinLogon

Client

Hash du password 2

C_Key

C_T_Key + EncTGS_Key[TGT]

4 3 7 8 10

C_S_Key + EncS_Key[ST]

11

13

Hash du password = C_Key 5

AS Req: Name + EncC_Key[Auth] AS Rep: EncC_Key[C_T_Key] + EncTGS_Key[TGT]

AS

Name: OK Timestamp: OK

6

TGT: OK Auth: OK

9

ST: OK Auth: OK

12

TGS_Key

TGS Req: S + EncC_T_Key[Auth] + EncTGS_Key[TGT] TGS Rep: EncS_Key[ST] + EncC_T_Key[C_S_Key]

TGS TGS_Key

AP Req: EncC_S_Key[Auth] + EncS_Key[ST] AP Rep: EncC_S_Key[Timestamp + 1]

Serveur S_Key

Auth = Name,ADR_C,Timestamp TGT = C,TGS,ADR_C,Timestamp,Life,C_T_Key ST = C,S,ADR_C,Timestamp,Life,C_S_Key

Laboratoire de transmission de données / EIG

8

Philippe Logean

17 avril 2003

1.

L’utilisateur entre son username, son password et le nom de domaine.

2.

La clé du client est générée par fonction de hashage MD5 du password.

3.

Envoi d’un « Authentication Service Request » (AS Req) contenant le username et un authentifieur chiffré avec la clé du client.

4 & 5. L’AS (Authentication Service) utilise le username pour rechercher la clé du client dans AD. 6.

Avec cette clé, le client déchiffre l’authentifieur qui contient le nom du client, son adresse et l’heure (timestamp). Le timestamp est une mesure empêchant à un intrus de rejouer des requêtes. Si le nom et le timestamp sont valides, le client est authentifié.

7.

Envoi d’un « Authentication Service Response » (AS Rep) contenant un ticket (TGT) et une clé de session. La clé de session est chiffrée avec la clé du client. Cette clé de session est utilisée pour chiffrer les échanges entre le client et le TGS (Ticket Granting Service). Le TGT (Ticket Granting Ticket) est chiffré avec la clé du TGS et ne peut pas être déchiffré par le client.

Une fois en possession du TGT, le client n’a plus besoin de s’authentifier pour accéder aux différant services du domaine (Single Sign On). La clé du client (hash du password) n’est pas conservée plus longtemps sur le post client. Pour se connecter aux autres services, le client présente sont TGT au TGS. 8.

Envoi d’un TGS Req contenant le service (ou serveur) désiré, le TGT et un authentifieur chiffré avec la clé de session client-TGS. Le TGS utilise sa clé pour déchiffrer le TGT qui contient le nom du client et du TGS, l’adresse du client, un timestamp, la durée de validité du ticket et la clé de session client-TGS. Le TGS utilise cette dernière clé pour déchiffrer l’authentifieur.

9.

Le TGS vérifie la validité des données contenues dans le TGT et l’authentifieur.

10. Envoi du TGS Rep contenant un ticket pour le service (ou serveur) désiré (ST) et une clé de session client-serveur. La clé de session est chiffrée avec la clé de session client-TGS. Le ticket est chiffré avec la clé du serveur et ne peut pas être déchiffré par le client. 11. Envoi d’un « Application Request » (AP Req) contenant le ticket du serveur et un authentifieur chiffré avec la clé de session client-serveur. Le serveur utilise sa clé pour déchiffrer le ticket qui contient le nom du client et du serveur, l’adresse du client, un timestamp, la durée de validité du ticket et la clé de session client-serveur. Le serveur utilise cette dernière clé pour déchiffrer l’authentifieur. 12. Le serveur vérifie la validité des données contenues dans le ticket et l’authentifieur. 13. Envoi d’un « Application Response » (AP Rep) contenant le timestamp du client incrémenté de 1. Cela permet au client d’authentifier le serveur (authentification mutuelle), car seul le serveur possédant la bonne clé est capable de déchiffrer le ticket.

Laboratoire de transmission de données / EIG

9

Philippe Logean

3.3

17 avril 2003

NTLM ou Kerberos ? Win2k utilise Kerberos à la place d’NTLM seulement quand l’authentification dois se faire sur une autre machine Win2k ou XP (ou Win9x avec un client AD) qui se trouve dans le même domaine ou dans un domaine trusté. Dans tous les autres cas, Win2k utilise NTLM (Source : [InW2kS] p.304). Par exemple, si un client Win2k se connecte sur un serveur Win2k n’étant pas membre du domaine, Win2k utilisera NTLM pour l’authentification. Deux postes Win2k dans Workgroup utilisent NTLM Kerberos utilise les noms DNS pour identifier les machines. Si l’accès à un partage (dans le même domaine) se fait en utilisant l’adresse IP (ex : \\10.1.2.24\partege), Kerberos ne fonctionne pas et NTLM est utilisé. Client

DC (KDC)

Serveur

v26.tdeig 10.1.2.26

DC.tdeig 10.1.1.10

v24.tdeig 10.1.2.24

Dans les captures ci-dessous, on voit le client (10.1.2.26) qui s’authentifie auprès du KDC (10.1.1.10) afin d’obtenir un ticket pour accéder au serveur (10.1.2.24). No. 170 171 172 173 174 175 176 177 178 179 180

Time 26.939096 26.941284 26.942126 26.943171 26.943958 26.944936 26.945711 26.946686 26.947136 26.947629 26.947999

Source 10.1.2.26 10.1.1.10 10.1.2.26 10.1.1.10 10.1.2.26 10.1.1.10 10.1.2.26 10.1.1.10 10.1.2.26 10.1.2.24 10.1.2.26

Destination 10.1.1.10 10.1.2.26 10.1.1.10 10.1.2.26 10.1.1.10 10.1.2.26 10.1.1.10 10.1.2.26 10.1.2.24 10.1.2.26 10.1.2.24

Protocol KRB5 KRB5 KRB5 KRB5 KRB5 KRB5 KRB5 KRB5 SMB SMB SMB

Info AS-REQ AS-REP TGS-REQ KRB-ERROR TGS-REQ KRB-ERROR TGS-REQ KRB-ERROR Session Setup AndX Request, NTLMSSP_NEGOTIATE Session Setup AndX Response, NTLMSSP_CHALLENGE Session Setup AndX Request, NTLMSSP_AUTH

Comme on le voit dans l’annexe 6, l’AS-Request et l’AS-Response se passent normalement. Mais lors du TGS-Request, le client passe l’adresse IP du serveur comme nom de serveur. Le KDC ne connaissant que le nom des machines (ex. v24.tdeig), il retourne l’erreur « KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN ». Après plusieurs tentatives infructueuses, le client se connecte directement au serveur en utilisant NTLM. Une série de tests à permis d’illustrer des différences dans le mode d’authentification du client en fonction de la méthode utilisée pour accéder au serveur. Les tests sont effectués de la manière suivante : Client Win2k V26 Logon: administrator Netlogon: alice

• • •

Connexion alice

Serveur Win2k V24

Le client ouvre sa session local avec le compte « administrator » et se connecte au serveur en utilisant le compte « alice ». Si le serveur est standalone, le compte « alice » est local au serveur. Si le serveur est dans le domaine, le compte « alice » est un compte de domaine (AD), sauf pour les testes avec « ** » (voir tableau ci-dessous).

Les méthodes d’accès au serveur testées sont : • Par le bureau : My Network Places – Computers Near Me – V24 • Avec le nom du serveur : Start – Run… - \\V24 • Avec l’IP du serveur : Start – Run… - \\10.1.2.24 • Avec l’FQDN du serveur : Start – Run… - \\V24.tdeig Laboratoire de transmission de données / EIG 10

Philippe Logean

17 avril 2003

Les testes sont effectuer avec est sans NetBIOS sur TCP/IP. Le tableau si dessous illustre les résultats :

Modes d'accès Avec NetBIOS Sans NetBIOS port Typ. Prot. port Méthode d'accès Typ. Username Typ. Prot. Client Standalone --> Serveur Standalone NTLM 139 Computer Near Me - alice alice@tdeig V24 alice NTLM 139 Run… - \\V24 alice@tdeig NTLM 445 NTLM 445 Run… - \\10.1.2.24 alice alice@tdeig NTLM * 445 * NTLM * 445 * Run… - \\V24.tdeig alice alice@tdeig Client Standalone --> Serveur Domaine *** NTLM ** 445 ** Computer Near Me - alice alice@tdeig Krb5 88 V24 alice NTLM ** 445 ** Run… - \\V24 alice@tdeig Krb5 88 NTLM ** 445 ** NTLM ** 445 ** Run… - \\10.1.2.24 alice alice@tdeig NTLM 445 NTLM 445 NTLM ** 445 ** NTLM ** 445 ** Run… - \\V24.tdeig alice alice@tdeig Krb5 88 Krb5 88 Client Domaine --> Serveur Domaine Krb5 88 Computer Near Me - alice alice@tdeig Krb5 88 V24 alice Krb5 88 Krb5 88 Run… - \\V24 alice@tdeig Krb5 88 Krb5 88 NTLM 445 NTLM 445 Run… - \\10.1.2.24 alice alice@tdeig NTLM 445 NTLM 445 Krb5 88 Krb5 88 Run… - \\V24.tdeig alice alice@tdeig Krb5 88 Krb5 88 Client Domaine --> Serveur Standalone *** NTLM 139 (445 *) Computer Near Me - alice alice@tdeig V24 alice NTLM 139 (445 *) NTLM * 445 * Run… - \\V24 alice@tdeig NTLM 445 NTLM 445 Run… - \\10.1.2.24 alice alice@tdeig NTLM * 445 * NTLM * 445 * Run… - \\V24.tdeig alice alice@tdeig * Seulement si le serveur est présent dans le DNS (cela est fait dynamiquement pour le serveur dans le domaine) ** Le compte doit être local au serveur ***Le client appartient au même workgroup que le serveur

Selon la documentation [WM15892], Win2k utilise le port 445, pour communiquer avec d’autres postes Win2k, ou le port 139, pour communiquer avec les versions précédentes de Windows. Comme on le voit dans le tableau, si le serveur est standalone et que l’on utilise le nom de la machine « \\V24 » (nom NetBIOS) pour la résolution d’adresse, le port SMB utilisé est le 139, même entre deux postes Win2k. Mais si le client fait partie du domaine « tdeig », le suffix DNS « tdeig » est automatiquement ajouter à « \\V24 », donc la connections se fait bien par le port 445. On constat aussi qu’il est possible d’accéder à un serveur dans un domaine en utilisant un compte de domaine depuis un poste client standalone. Pour cela, il faut utiliser l’Universal Principal Name (UPN Æ user@domain) pour forcer l’exécution de Kerberos. Remarque : Il est possible que des authentifications devant normalement se faire avec Kerberos ne le soient pas. En effet, si le DC ne répond pas à la requête Kerberos du client (flooding du DC), le client passe en NTLM.

Laboratoire de transmission de données / EIG 11

Philippe Logean

4

Mesure pour augmenter la sécurité des password

4.1

Désactivé LM et NTLM

17 avril 2003

Win2k possède une clé de registre permettant de choisir quel type de réponse le client peut envoyer au serveur lors du logon et quel type de réponse le serveur peux accepter. Cette clé est « LMCompatibilityLevel » du type « REG_DWORD » et peut avoir la valeur de 0 à 5. Cette clé se trouve dans HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\LSA. •

Level 0 (Send LM and NTLM response) : Le Level 0 est le niveau par défaut. Il envoie les deux types de réponses, LM et NTLM (annexe 1). Ce niveau est compatible avec toutes versions de Windows, mais est le plus vulnérable.

•

Level 1 (Send LM and NTLM - Use NTLM 2 session if negotiated) : Le Level 1 négocie le plus haut niveau d’authentification possible, c’est à dire NTLMv2. Mais le Level 1 revient à l'authentification LM en cas de besoin et n'améliore pas la sécurité.

•

Level 2 (Send NTLM response only) : Le Level 2 envoie uniquement des réponses du type NTLM. Selon l’article « Inside SP4 NTLMv2 Security Enhancements » [WM7072], les champs LMResponse et NTLM-Response sont remplies avec la réponse NTLM pour des raisons de compatibilité. Mais dans l’annexe 2, on constate que le hash LM est différant du hash NTLM.

•

Level 3 (Send NTLMv2 response only) : Le Level 3 envoie uniquement des réponses du type NTLMv2. Toujours selon l’article « Inside SP4 NTLMv2 Security Enhancements » [WM7072], Microsoft voulait remplir les champs LM-Response et NTLM-Response avec la réponse NTLMv2, pour des raisons de compatibilité, comme pour le Level 2. Malheureusement, le champ LMResponse ne peut pas dépasser 24 bytes et la réponse NTLMv2 est plus grande que 24 bytes. Microsoft a donc créé une réponse de 24 bytes appelé LMv2 (aucune documentation sur cet algorithme n’a été trouvé). En forçant l’utilisation de NTLMv2, le client doit ouvrir sa session Windows en utilisant un compte existant sur le serveur : • Compte de domaine : Pas de problèmes • Compte local : Le compte doit exister sur le client et le serveur. Si le compte du client est différant du compte du serveur, il faut donner le username de la forme suivante : « server_name/server_account » (ex : v24/alice). En effet, si on tape uniquement « alice » comme username, cela correspond à « client_name/alice » qui n’est pas connu par le serveur, donc cela ne fonctionne pas. Dans l’annexe 3, on voit que le client retourne le nom du serveur (v24) dans le champ Domain Name.

•

Level 4 (Send NTLMv2 response only \ refuse LM) : Pour le poste client, le Level 4 est identique au Level 3. Le Level 4 spécifie que le serveur refuse la connexion d’un client, ne supportant pas NTLM ou NTLMv2, utilisant un compte local du serveur. Le DC refuse toutes connexions d’un client ne supportant pas NTLM ou NTLMv2.

•

Level 5 (Send NTLMv2 response only \ refuse LM & NTLM) : Le Level 5 est identique au Level 4 à la différance que seul le client supportant NTLMv2 peut se connecter au serveur.

Win2k à implémenté le choix de ces différents niveaux d’authentifications dans les GPO (Group Policy Object) : Security Settings – Local Policies – Security Options – Lan Manager Authentication Level Comme on peut le constater, il n’y a pas de moyen de désactiver complètement ces trois types d’authentification afin de n’utiliser que Kerberos. Par contre, dans un environnement purement Win2k, il est déjà possible de limiter les risque en forçant l’utilisation d’NTLMv2. Les annexes 1 à 5 sont des captures d’authentifications pour chacun de ces niveaux (sauf le Level1). On constate que ces échanges sont identiques. On ne voit pas de différance lors de la négociation du protocole. La seule différance est la longueur du NTLM-Response qui est de 92 bytes pour NTLMv2 et de 24 bytes pour NTLM. Sources : [Q147706] [Q239869] [WM7072]

Laboratoire de transmission de données / EIG 12

Philippe Logean

4.2

17 avril 2003

Forcer l’utilisation de Kerberos Comme nous l’avons vu au § 3.3, Win2k utilise l’authentification Kerberos pour des machines se trouvant dans le même domaine ou dans un domaine trusté. Donc, ce protocole ne peut pas être utilisé entre des postes standalones, car un KDC est nécessaire. Par contre, si un client standalones désire se connecter à un serveur se trouvant dans un domaine, il est possible de forcer l’utilisation de Kerberos en utilisant un Universal Principal Name (UPN Æ user@domain) lors de l’authentification. De cette manière, le client se connecte au serveur en utilisant un compte de domaine. Pour que cela fonctionne, il faut que le serveur DNS par défaut du client connaisse le DC et le serveur. Pour dire les choses de manière différente, Kerberos fonctionne que si l’on utilise des comptes de domaine et non des comptes locaux. Donc si on désire limiter les risques d’utiliser un protocole issu de LM, il est nécessaire d’empêcher l’utilisation de ces comptes locaux. Cela peut être fait au niveau d’AD en plaçant les postes clients et les serveurs dans un OU. Il faut ensuite créer et éditer le GPO suivant pour cet OU : Computer Configuration – Windows Settings – Security Settings – Local Policies – User Right Assignment

Ouvrer la Policy « Log on locally » puis ajouter (Add…) Domain Users à la liste. Ainsi, seul les utilisateurs faisant parti du domaine (compte de domaine) peuvent ouvrir une session localement. Il faut effectuer la même opération sur la Policy « Access this computer from the network » afin d’empêcher la connexion d’un client sur le poste en utilisant un compte local.

Pour se connecter à un serveur, il est important d’utiliser son FQDN et non pas sont adresse IP, sinon Kerberos ne fonctionnera pas (§ 3.3). Remarque : Les Filtres IPSec de Win2k permettraient de forcer l’authentification Kerberos. 4.3

Suppression de la SAM de secours Un fichier SAM de secours est contenu dans %systemroot%\repair. Il contient tous les utilisateurs configurés sur un système lors de son installation. Ce fichier est créé par l’utilitaire de réparation de disque (Create Emergency Repair Disk) intégré à l’application Microsoft Backup v.5 (ntbackup.exe). Ce fichier n’est pas verrouillé par le système d’exploitation, donc vérifier les droits d’accès sur le fichier. Après la création d’un « Emergency Repair Disk », il est conseiller de supprimer le fichier SAM du répertoire %systemroot%\repair et de mettre la disquette dans un lieu sur (elle contient la SAM). Les risque d’attaque sur ce fichier sont atténuée, car les mécanismes de décryptage d’un fichier crypté avec SYSKEY (à l’inverse de l’application pwdump2 à un fichier SAM actif) n’ont pas été diffusés dans le grand public (p.269 [HalHac]).

4.4

Suppression des hash LM dans la SAM et AD Comme nous l’avons vu plus haut, deux types de hash (LM & NTLM) sont stockés dans la SAM (ou dans AD) pour des raisons de compatibilité descendante. Comme nous le verrons dans le § 5, le hash LM est beaucoup plus vulnérable aux attaques que le hash NTLM. Depuis Win2k SP2, il est possible d’empêcher la création du hash LM dans la SAM et AD grâce à une nouvelle clé de registre [Q299656]. Pour cela : • Avec Regedit aller dans HKLM\SYSTEM\CurrentControlSet\Control\Lsa • Dans le menu Edit – New – Key taper « NoLMHash » • Fermer Regedit et rebooter la machine Attention : Une fois la clé de registre ajoutée, les hash LM des comptes utilisateurs déjà existant ne sont pas supprimés tant que les utilisateurs ne changent pas leur password.

Laboratoire de transmission de données / EIG 13

Philippe Logean

5

Attaques

5.1

Interception des paquets challenges – responses

17 avril 2003

Le but de cette attaque est de s’emparer du password des utilisateurs se connectant à un serveur. En sniffant le réseau, il est possible d’intercepter les paquets challenges – responses entre le client et le serveur. Ensuit, en utilisant différentes méthodes (dictionnaire, hybride ou brute force (voir § 5.5)), des passwords sont générés pour hasher le challenge. Dès que le résultat obtenu est identique au message response du client, le password généré correspond au password de l’utilisateur. 5.1.1

L0phtCrack 4 (LC4) L0phtCrack 4 (LC4) est un outil de détection ou de récupération de mots de passes développer par @stake (http://www.atstake.com/research/lc/). Il permet de retrouver des passwords soit en extrayant les hashes des passwords à partir de la SAM (voir § 5.5) ou directement en capturant les paquets challenges – responses sur le réseau. Malheureusement, lors des testes, on a constaté que LC4 n’arrive pas à intercepter les paquets d’authentification si le client et le serveur sont des postes Win2k. Cela peut avoir deux raisons : •

La première : Si le client et le serveur Win2k sont membre du même domaine ou d’un domaine trusté, l’authentification se fait par Kerberos. LC4 n’est pas capable d’intercepter et de cracker Kerberos. Il fonctionne uniquement pour les échanges challenges – response de type LM ou NTLM (aucune indication n’est donnée sur NTLMv2). Mais même en faisant des testes entre deux postes Win2k standalone qui utilisent NTLM, LC4 n’a pas été capable d’intercepter l’échange.

•

La deuxième : Selon l’article « Win2K Password Protection » [WM15892], LC4 est capable de capturer les échanges entre un post Win2k et NT qui utilise le port 139 (NTLM et SMB), mais pas entre deux post Win2k qui utilise le port 445 (CIFS (Common Internet File System)). Mais comme nous l’avons vu dans le tableau au § 3.3, il est possible de s’authentifier entre deux postes Win2k en utilisant le port 139. Malgré cela, LC4 n’a pas été capable d’intercepter l’échange.

Comme nous l’avons remarqué au § 3.1, Win2k utilise NTLMSSP (NTLM Security Support Provider) lors de l’authentification avec un autre poste Win2k. Cela n’est pas le cas pour des postes plus anciens (NT, 9x). La meilleure hypothèse à retenir est que le sniffer de LC4 n’est pas capable de capturer les échanges NTLMSSP. Dans se version actuelle, la fonction sniff de LC4 n’est donc pas utilisable entre deux postes Win2k. Par contre cet outil reste très précieux pour retrouver les passwords à partir des hashs extrait de la SAM (§ 5.5) 5.1.2

ScoopLM et BeatLM ScoopLM et BeatLM sont des outils de capture et de recherche de passwords LM, NTLM et NTLMv2 développé par SecurityFriday (http://www.securityfriday.com/). ScoopLM est le sniffeur permettant de récupérer les paquets challenges – response. Il permet de sauvegarder les captures dans un fichier afin de les utiliser avec BeatLM. BeatLM et l’application qui recherche les passwords en utilisant les méthodes par dictionnaire, hybride ou brute force. Grâce à ces programmes, il est possible de capturer les échanges entre deux postes Win2k, mais malheureusement, la recherche des passwords ne fonctionne pas. Aucune information n’a été trouvée à ce sujet.

5.2

Attaque des échanges Kerberos Actuellement, aucun outil disponible ne permet de retrouver le password d’un utilisateur en capturant les échanges Kerberos sur le réseau. Cela ne veut pas dire que ce n’est pas possible. L’article « Feasibility of attacking Windows 2000 Kerberos Passwords » [AttKrbPa] décrit la manière qui permettrai de réaliser cette attaque. Le principe est simple. Il suffit de capturer l’authentifieur chiffré envoyé lors de l’AS Req. L’authentifieur contient un timestamp dont le format est YYYYMMDDHHMMSSZ (ex : 20030319163425Z) et un cryptographic checksum. Des passwords peuvent être générés (à la manière de LC4) pour déchiffrer l’authentifieur et rechercher un string correspondant au format du timestamp. Si le résultat ressemble à ce format, le password est presque certainement correct. Pour vérifier la validité du password, il suffit de recalculer le cryptographic checksum est de le comparer avec celui contenu dans l’authentifieur. Laboratoire de transmission de données / EIG 14

Philippe Logean

5.3

17 avril 2003

Accès à la SAM L’accès à la SAM n’est pas possible tant qu’une session Windows est ouverte. La solution est de booter la machine avec une disquette DOS et de monter les partitions NTFS en utilisant le logiciel NTFSDOS (http://www.sysinternals.com/ntw2k/freeware/NTFSDOS.shtml). Ensuite la SAM peut être copier sur la disquette. Remarque : La version demo de NTFSDOS permet uniquement la lecture des fichiers NTFS. Une autre solution est de s’emparer du fichier SAM de secours, contenu dans %systemroot%\repair, s’il n’a pas été supprimé. Ce fichier n’est pas verrouillé par le système d’exploitation et peut donc être copié Remarque : Si aucun « Emergency Repair Disk » n’a été créé sur le poste, la SAM de secours contient uniquement les comptes Administrator et Guest créé lors de l’installation de Win2k

5.4

Extraction des informations du fichier SAM Pwdump est un programme qui permet d’extraire les username et les hash des passwords de la base de données SAM d’un system NT. Win NT

Administrateur

User1:HashLM:HashNTLM User2:HashLM:HashNTLM : :

Pwdump

SAM

Sur les systemes Win2k, le contenu de la SAM est protégé par SYSKEY. SYSKEY ajoute un niveau supplémentaire d’encryptions aux hashs des passwords stockés dans la SAM (§ 2.3). Actuellement, il n’existe pas encore de moyen de déchiffrer la SAM sans posséder la bonne clé. Il n’est donc pas possible d’extraire ces informations du fichier SAM. Une version plus agressive de Pwdump, appelée Pwdump2, permet de surmonter SYSKEY (p.195 [HalHac]). Pwdump2 peut être téléchargé sur http://razor.bindview.com/tools/desc/pwdump2_readme.html. Win 2k

Administrateur

User1:HashLM:HashNTLM User2:HashLM:HashNTLM : :

SYSKEY

Pwdump2

SAM

Pwdump2 exploite l’injection de DLL pour charger son propre code dans l’espace de traitement d’un processus doté de droits d’accès élevés. Le processus visé est lsass.exe, c’est à dire le sous-système local de sécurité. Une fois chargé dans le processus, le code pirate peut effectuer un appel API interne accédant aux hashs des passwords cryptés par SYSKEY, sans avoir à les décrypter. Pwdump2 doit être lancé dans l’espace de traitement du système cible (localement). Des droits d’accès Administrateur sont nécessaires. Pwdump3 (http://www.polivec.com/pwdump3.html) est une amélioration de Pwdump2. Il peut être exécuté à travers le réseau même si SYSKEY est activé. Pwdump3 ne représente pas un nouvel exploit puisque des privilèges administratifs sont encore exigés sur le système distant, comme les versions précédentes de Pwdump. Une des grandes améliorations avec Pwdump3 est qu’il n’est plus obligatoire d'exécuter le programme directement sur chaque machine. Win 2k

Administrateur

User1:HashLM:HashNTLM User2:HashLM:HashNTLM : :

Win 2k Pwdump3

SYSKEY

SAM

Laboratoire de transmission de données / EIG 15

Philippe Logean

5.5

17 avril 2003

Décryptage des hashs des mots de passe Le décryptage des hashs des passwords consiste en réalité à : • Générer un password • Calculer son hash • Comparer le résultat au hash extrait de la SAM S’ils sont identiques, le password généré correspond au password de l’utilisateur. La génération du password peut se faire de différentes méthodes : • Dictionnaire : Liste de passwords (ex : monpass) • Hybride : Ajout de un ou plusieurs caractères aux passwords du dictionnaire (ex : monpass21) • Brute force : Génération de toutes les combinaisons possible de password (ex : Ad4$hr4) Dans l’exemple ci-dessous, nous utilisons LC4 (L0phtcrack 4, voir § 5.1.1) pour tester la « dureté » des différents passwords contre ce type d’attaque. LC4 intègre Pwdump2. Il est directement capable d’extraire les informations de la SAM du system sur lequel il est installé puis de rechercher les passwords. Pour cette raison, les essais sont faits localement sur un poste de test. Le tableau ci-dessous représente les compte créés sur le système testé et les passwords de complexité diverse : Username Admin2 Admin1 Administrator Alice Bob Charly Toto

Password Jx3?cN8s Jx3?cN8suV Jx3tcN8suV Jx3tcN8s jx3tcn8s jxptcnds toto26

caractéristiques 8 car. , minuscules, majuscules, chiffres, car. spéciaux 10 car. , minuscules, majuscules, chiffres, car. spéciaux 10 car. , minuscules, majuscules, chiffres 8 car. , minuscules, majuscules, chiffres 8 car. , minuscules, chiffres 8 car. , minuscules password simple

En lançant LC4 (Import – Import from local machine), on voit qu’il récupère les hashs LM et les hashs NTLM dans le fichier SAM locale.

Voici ce qui se passe quand on lance le « décryptage » : • LC4 utilise les mots contenus dans un dictionnaire pour générer les hashs LM et compare le résultat avec les hashs extraient de la SAM. •

Si les passwords ne sont pas découverts, LC4 commence la recherche hybride. Pour cela, un ou plusieurs caractères (2 car. par défaut) sont ajoutés aux mots du dictionnaire. Ce test montre l’exemple du password « TOTO26 ». Le mot « TOTO » est contenu dans le dictionnaire. En ajoutant différents caractères, le password est découvert en quelques minutes (4m10s).

•

Si tous les passwords ne sont toujours pas découverts, LC4 lance l’attaque brute force. Comme nous l’avons vu au §3.1.1, la hash LM est calculé en découpant le password en deux parties de 7 caractères. Donc LC4 ne doit s’attaquer qu’à un passwords non case-sensitive (majuscule) de 7 7 caractères. Cela donne 36 combinaisons alphanumériques. Comme on le voit sur les 2 premières lignes de la capture ci-dessus, la deuxième partie des passwords, ne contenant que peut de caractères, sont trouvés presque instantanément.

•

Lorsque le password LM est retrouvé, LC4 teste toutes les combinaisons majuscules et minuscules pour retrouver le password NTLM. Laboratoire de transmission de données / EIG 16

Philippe Logean

17 avril 2003

Remarques : Sur la capture ci-dessus, on constate que les passwords des comptes Administrator, Alice et bob ont été trouvé en même temps (7h41m17s). Cela est dû au fait que les 7 premiers caractères de ces 3 passwords en majuscule sont identiques et que la résolution de la deuxième partie des passwords est finit bien avant la première. Les passwords des comptes admin1 et admin2 n’ont pas été résolus car ils contiennent des caractères spéciaux. Il est possible de configurer LC4 pour effectuer une attaque brute force utilisant ce type de caractères mais cela aurai pris plusieurs semaines. Ce premier test montre bien que la longueur des passwords ne change pas beaucoup le temps de recherche si le hash LM est présent (7 car.). Par contre, on voit bien que les passwords simples sont « cassés » en quelques minutes, alors que des passwords employant des caractères spéciaux nécessite plusieurs semaines. Pour le deuxième test, les hash LM sont supprimés de la SAM (voir § 4.4). En lançant LC4 (Import – Import from local machine), on constate que des hashs LM sont tout de même récupérés. En réalité, la valeur afficher correspond au résultat par défaut du hash LM s’il n’y a pas de password. Le hash LM n’étant pas présent, LC4 doit s’attaquer au hash NTLM. Comme le password est case14 sensitive et peut avoir 14 caractères, cela représante 62 combinaisons alphanumériques.

Lors du lancement du test, on constate immédiatement que la génération des hashs NTLM est beaucoup plus lente (calcul sur 14 car.) que celle des hashs LM. En effet, l’attaque par dictionnaire à durée 55 minutes alors qu’il n’a fallu que 13 secondes pour les hash LM. Pour l’attaque Brute Force, LC4 calcule 380’000 hash NTLM par seconde contre 3'500'000 hash LM. L’attaque hybride étant estimée à plusieurs semaines, ce test n’est pas activé afin de passer directement au Brute Force. On constate que le password de 6 caractères « toto26 » est retrouvé en 1 jour et 22 heure. Après 27 jours de test, aucun password de 8 caractères n’est découvert. Le temps estimé pour le calcule de toutes les combinaisons alphanumériques oscille entre 500 et 800 jours. Remarque : Ces testes sont fait à l’aide d’un Pentium 4 (1,8G). Ce test montre bien qu’il est plus difficile de retrouver un password à partir d’un hash NTLM. En plus de la 14 complexité de l’algorithme (temps de calcule), d’un nombre de combinaisons plus important (62 alphanumériques), la durée de l’attaque est, cette fois, directement dépendante de la longueur du password. 5.6

Suppression du password administrateur Le password Administrateur peut être supprimé en effaçant le fichier SAM (p.272 [HalHac]). En faisant cela, tous les comptes locaux sont perdus. Par contre, lors du boot, Windows constate l’absence de la SAM et recrée une SAM d’origine contenant les comptes Administrator et Guest. Malheureusement, ces comptes ne sont pas protéger par un password et permette l’ouverture de session en tant qu’administrateur. Pour effectuer cette attaque, il suffit de bootter la machine à l’aide d’une disquette DOS, de monter les partitions NTFS avec le logiciel NTFSDOS Pro (http://www.winternals.com) puis d’effacer la SAM dans le répertoire %systemroot%\system32\config\ . Remarque : Cette opération n’est pas réalisable avec la version demo de NTFSDOS. En effet, l’effacement d’un fichier est considéré comme une écriture. Laboratoire de transmission de données / EIG 17

Philippe Logean

6

17 avril 2003

Conclusion Kerberos est certainement le protocole offrant la meilleure sécurité sur des systèmes Win2k. Malheureusement, il n’existe encore aucun moyen pour désactiver tous les protocoles issus de Lan Manager et ainsi garantir l’utilisation de Kerberos. De plus, il est possible qu’un outil simple (comme LC4), permettant d’attaquer Kerberos, voit le jour dans un futur proche. Les différents tests montrent l’importance de la « dureté » des passwords. Des passwords mal choisis peuvent être retrouver rapidement quel que soit le protocole utilisé. Une solution à ces problèmes existe. Il s’agit de la mise en place de l’extension Kerberos PKINI utilisant une infrastructure PKI (clé asymétrique, certificat, CA, …) à la place du username et du password. Les avantages sont : • Utilisation d’authentification forte (token + PIN) • Attaques de type brut force irréalisable dans une durée acceptable • Possibilité de forcer l’authentification par token dans un domaine Win2k (garanti la non-utilisation des protocoles issus de Lan Manager) En permettant l’accès physique à une machine, il est difficile de garantir sa sécurité. C’est pour cela qu’il est important d’empêcher l’accès à une machine sensible (serveur) en la plaçant dans un local fermé à clé. Pour des postes client, il est préférable de supprimer le floppy et le CDRom de la séquence de boot, de verrouillé le BIOS par un mot de passe, et de fermer le boîtier à l’aide d’un cadenas.

7

Sources •

Halte aux Hacker (deuxième edition) Scambray, McClure, Kurtz Editions OEM, ISBN 2-7464-0292-0

[HalHac]

•

Hacking Windows 2000 Exposed Scambray, McClure Osborne / McGraw, ISBN 0-07-219262-3

[Hac2kEx]

•

Inside Windows 2000 Server William Boswell New Riders Publishing 2000, ISBN 1-56205-929-7

[InW2kS]

•

Cracking NTLMv2 Authentication http://www.blackhat.com/presentations/win-usa-02/urity-winsec02.ppt

[CrNtlmPpt]

•

Inside SP4 NTLMv2 Security Enhancements http://www.win2000mag.com/Articles/Index.cfm?ArticleID=7072

[WM7072]

•

How to Disable LM Authentication on Windows NT http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B147706

[Q147706]

•

How to Enable NTLM 2 Authentication for Windows 95/98/2000 and NT http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B239869

[Q239869]

•

Remove LM Hashes from Active Directory and Security Account Manager [Q299656] http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B299656

•

Win2K Password Protection http://www.winnetmag.com/Articles/Index.cfm?ArticleID=15892

[WM15892]

•

Feasibility of attacking Windows 2000 Kerberos Passwords http://www.brd.ie/papers/w2kkrb/feasibility_of_w2k_kerberos_attack.htm

[AttKrbPa]

Laboratoire de transmission de données / EIG 18

Philippe Logean

8

Annexes

Annexe 1 Netlogon entre 2 postes Win2k Level 0 Frame 19 (191 bytes on wire, 191 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: 10.1.2.24 (10.1.2.24) Transmission Control Protocol, Src Port: 1029 (1029), Dst Port: 139 (139), Seq: 179180367, Ack: 695332516, Len: 137 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 20 SMB Command: Negotiate Protocol (0x72) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc853 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .1.. .... = Long Names Used: Path names in request are long file names .... .... .... .0.. = Security Signatures: Security signatures are not supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 0 Negotiate Protocol Request (0x72) Word Count (WCT): 0 Byte Count (BCC): 98 Requested Dialects Dialect: PC NETWORK PROGRAM 1.0 Dialect: LANMAN1.0 Dialect: Windows for Workgroups 3.1a Dialect: LM1.2X002 Dialect: LANMAN2.1 Dialect: NT LM 0.12

Frame 20 (143 bytes on wire, 143 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: 10.1.2.24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1029 (1029), Seq: 695332516, Ack: 179180504, Len: 89 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 19 Time from request: 0.000371000 seconds SMB Command: Negotiate Protocol (0x72) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted

17 avril 2003

.... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc853 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .1.. .... = Long Names Used: Path names in request are long file names .... .... .... .0.. = Security Signatures: Security signatures are not supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 0 Negotiate Protocol Response (0x72) Word Count (WCT): 17 Dialect Index: 5, greater than LANMAN2.1 Security Mode: 0x03 .... ...1 = Mode: USER security mode .... ..1. = Password: ENCRYPTED password. Use challenge/response .... .0.. = Signatures: Security signatures NOT enabled .... 0... = Sig Req: Security signatures NOT required Max Mpx Count: 50 Max VCs: 1 Max Buffer Size: 16644 Max Raw Buffer: 65536 Session Key: 0x00000000 Capabilities: 0x8000f3fd .... .... .... .... .... .... .... ...1 = Raw Mode: Read Raw and Write Raw are supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 1... = Large Files: Large files are supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..1. .... = RPC Remote APIs: RPC remote APIs are supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...1 .... .... = Lock and Read: Lock and Read is supported .... .... .... .... .... ..1. .... .... = NT Find: NT Find is supported .... .... .... .... ...1 .... .... .... = Dfs: Dfs is supported .... .... .... .... ..1. .... .... .... = Infolevel Passthru: NT information level request passthrough is supported .... .... .... .... .1.. .... .... .... = Large ReadX: Large Read andX is supported .... .... .... .... 1... .... .... .... = Large WriteX: Large Write andX is supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported System Time: Feb 25, 2003 11:42:04.287811279 Server Time Zone: -60 min from UTC Key Length: 0 Byte Count (BCC): 16 Server GUID: 1F7724E6872BAA41A689B64C36457245 Security Blob: <MISSING>

Frame 45 (222 bytes on wire, 222 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: 10.1.2.24 (10.1.2.24) Transmission Control Protocol, Src Port: 1029 (1029), Dst Port: 139 (139), Seq: 179182200, Ack: 695333910, Len: 168 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 46 SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless

Laboratoire de transmission de données / EIG 19

Philippe Logean .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 705 Session Setup AndX Request (0x73) Word Count (WCT): 12 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 164 Max Buffer: 16644 Max Mpx Count: 50 VC Number: 1 Session Key: 0x00000000 Security Blob Length: 32 Reserved: 00000000 Capabilities: 0x800000d4 .... .... .... .... .... .... .... ...0 = Raw Mode: Read Raw and Write Raw are not supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 0... = Large Files: Large files are not supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..0. .... = RPC Remote APIs: RPC remote APIs are not supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...0 .... .... = Lock and Read: Lock and Read is not supported .... .... .... .... .... ..0. .... .... = NT Find: NT Find is not supported .... .... .... .... ...0 .... .... .... = Dfs: Dfs is not supported .... .... .... .... ..0. .... .... .... = Infolevel Passthru: NT information level request passthrough is not supported .... .... .... .... .0.. .... .... .... = Large ReadX: Large Read andX is not supported .... .... .... .... 0... .... .... .... = Large WriteX: Large Write andX is not supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported Byte Count (BCC): 105 Security Blob: 4E544C4D5353500001000000978208E0... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_NEGOTIATE (0x00000001) Flags: 0xe0088297 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 0... .... .... .... .... .... = Negotiate Target Info: Not set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..0. .... .... .... .... = Negotiate Challenge Accept Response: Not set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set

17 avril 2003

.... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 1... .... = Negotiate Lan Manager Key: Set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..1. = Negotiate OEM: Set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set Calling workstation domain: NULL Calling workstation name: NULL Native OS: Windows 2000 2195 Native LAN Manager: Windows 2000 5.0 Primary Domain:

Frame 46 (273 bytes on wire, 273 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: 10.1.2.24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1029 (1029), Seq: 695333910, Ack: 179182368, Len: 219 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 45 Time from request: 0.000358000 seconds SMB Command: Session Setup AndX (0x73) NT Status: STATUS_MORE_PROCESSING_REQUIRED (0xc0000016) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 8195 Multiplex ID: 705 Session Setup AndX Response (0x73) Word Count (WCT): 4 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 215 Action: 0x0000 .... .... .... ...0 = Guest: Not logged in as GUEST Security Blob Length: 98 Byte Count (BCC): 172 Security Blob: 4E544C4D535350000200000006000600... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_CHALLENGE (0x00000002) Domain: V24 Length: 6 Maxlen: 6 Offset: 48 Flags: 0xe08a8215 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set

Laboratoire de transmission de données / EIG 20

Philippe Logean ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 1... .... .... .... .... .... = Negotiate Target Info: Set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..1. .... .... .... .... = Negotiate Challenge Accept Response: Set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 0... .... = Negotiate Lan Manager Key: Not set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..0. = Negotiate OEM: Not set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set NTLM Challenge: 8998332BC906CE06 Reserved: 0000000000000000 Address List Length: 44 Maxlen: 44 Offset: 54 Domain NetBIOS Name: V24 Server NetBIOS Name: V24 Domain DNS Name: v24 Server DNS Name: v24 Native OS: Windows 5.0 Native LAN Manager: Windows 2000 LAN Manager

Frame 47 (352 bytes on wire, 352 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: 10.1.2.24 (10.1.2.24) Transmission Control Protocol, Src Port: 1029 (1029), Dst Port: 139 (139), Seq: 179182368, Ack: 695334129, Len: 298 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 48 SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000

17 avril 2003

Tree ID: 0 Process ID: 65279 User ID: 8195 Multiplex ID: 769 Session Setup AndX Request (0x73) Word Count (WCT): 12 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 294 Max Buffer: 16644 Max Mpx Count: 50 VC Number: 1 Session Key: 0x00000000 Security Blob Length: 162 Reserved: 00000000 Capabilities: 0x800000d4 .... .... .... .... .... .... .... ...0 = Raw Mode: Read Raw and Write Raw are not supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 0... = Large Files: Large files are not supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..0. .... = RPC Remote APIs: RPC remote APIs are not supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...0 .... .... = Lock and Read: Lock and Read is not supported .... .... .... .... .... ..0. .... .... = NT Find: NT Find is not supported .... .... .... .... ...0 .... .... .... = Dfs: Dfs is not supported .... .... .... .... ..0. .... .... .... = Infolevel Passthru: NT information level request passthrough is not supported .... .... .... .... .0.. .... .... .... = Large ReadX: Large Read andX is not supported .... .... .... .... 0... .... .... .... = Large WriteX: Large Write andX is not supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported Byte Count (BCC): 235 Security Blob: 4E544C4D535350000300000018001800... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_AUTH (0x00000003) Lan Manager Response: 8C684487A3F9D25F0000000000000000... Length: 24 Maxlen: 24 Offset: 98 NTLM Response: B55DE25D38CD931F2BC2E508EEFDA365... Length: 24 Maxlen: 24 Offset: 122 Domain name: V26PRO Length: 12 Maxlen: 12 Offset: 64 User name: alice Length: 10 Maxlen: 10 Offset: 76 Host name: V26PRO Length: 12 Maxlen: 12 Offset: 86 Session Key: D38A784A84EF19F8F9A17B391BD850EE Length: 16 Maxlen: 16 Offset: 146 Flags: 0xe0888215 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 1... .... .... .... .... .... = Negotiate Target Info: Set

Laboratoire de transmission de données / EIG 21

Philippe Logean .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..0. .... .... .... .... = Negotiate Challenge Accept Response: Not set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 0... .... = Negotiate Lan Manager Key: Not set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..0. = Negotiate OEM: Not set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set Native OS: Windows 2000 2195 Native LAN Manager: Windows 2000 5.0 Primary Domain:

17 avril 2003

Native LAN Manager: Windows 2000 LAN Manager

Frame 48 (175 bytes on wire, 175 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: 10.1.2.24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1029 (1029), Seq: 695334129, Ack: 179182666, Len: 121 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 47 Time from request: 0.000730000 seconds SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 8195 Multiplex ID: 769 Session Setup AndX Response (0x73) Word Count (WCT): 4 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 117 Action: 0x0000 .... .... .... ...0 = Guest: Not logged in as GUEST Security Blob Length: 0 Byte Count (BCC): 74 Security Blob: <MISSING> Native OS: Windows 5.0

Laboratoire de transmission de données / EIG 22

Philippe Logean

Annexe 2 Netlogon entre 2 postes Win2k Level 2 Frame 17 (191 bytes on wire, 191 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1030 (1030), Dst Port: 139 (139), Seq: 247180332, Ack: 317719029, Len: 137 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 18 SMB Command: Negotiate Protocol (0x72) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc853 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .1.. .... = Long Names Used: Path names in request are long file names .... .... .... .0.. = Security Signatures: Security signatures are not supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 0 Negotiate Protocol Request (0x72) Word Count (WCT): 0 Byte Count (BCC): 98 Requested Dialects Dialect: PC NETWORK PROGRAM 1.0 Dialect: LANMAN1.0 Dialect: Windows for Workgroups 3.1a Dialect: LM1.2X002 Dialect: LANMAN2.1 Dialect: NT LM 0.12

Frame 18 (143 bytes on wire, 143 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1030 (1030), Seq: 317719029, Ack: 247180469, Len: 89 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 17 Time from request: 0.000359000 seconds SMB Command: Negotiate Protocol (0x72) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported

17 avril 2003

Flags2: 0xc853 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .1.. .... = Long Names Used: Path names in request are long file names .... .... .... .0.. = Security Signatures: Security signatures are not supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 0 Negotiate Protocol Response (0x72) Word Count (WCT): 17 Dialect Index: 5, greater than LANMAN2.1 Security Mode: 0x03 Max Mpx Count: 50 Max VCs: 1 Max Buffer Size: 16644 Max Raw Buffer: 65536 Session Key: 0x00000000 Capabilities: 0x8000f3fd .... .... .... .... .... .... .... ...1 = Raw Mode: Read Raw and Write Raw are supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 1... = Large Files: Large files are supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..1. .... = RPC Remote APIs: RPC remote APIs are supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...1 .... .... = Lock and Read: Lock and Read is supported .... .... .... .... .... ..1. .... .... = NT Find: NT Find is supported .... .... .... .... ...1 .... .... .... = Dfs: Dfs is supported .... .... .... .... ..1. .... .... .... = Infolevel Passthru: NT information level request passthrough is supported .... .... .... .... .1.. .... .... .... = Large ReadX: Large Read andX is supported .... .... .... .... 1... .... .... .... = Large WriteX: Large Write andX is supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported System Time: Feb 27, 2003 09:41:44.640859603 Server Time Zone: -60 min from UTC Key Length: 0 Byte Count (BCC): 16 Server GUID: 1F7724E6872BAA41A689B64C36457245 Security Blob: <MISSING>

Frame 41 (222 bytes on wire, 222 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1030 (1030), Dst Port: 139 (139), Seq: 247182165, Ack: 317720423, Len: 168 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 42 SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes

Laboratoire de transmission de données / EIG 23

Philippe Logean ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 705 Session Setup AndX Request (0x73) Word Count (WCT): 12 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 164 Max Buffer: 16644 Max Mpx Count: 50 VC Number: 1 Session Key: 0x00000000 Security Blob Length: 32 Reserved: 00000000 Capabilities: 0x800000d4 .... .... .... .... .... .... .... ...0 = Raw Mode: Read Raw and Write Raw are not supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 0... = Large Files: Large files are not supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..0. .... = RPC Remote APIs: RPC remote APIs are not supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...0 .... .... = Lock and Read: Lock and Read is not supported .... .... .... .... .... ..0. .... .... = NT Find: NT Find is not supported .... .... .... .... ...0 .... .... .... = Dfs: Dfs is not supported .... .... .... .... ..0. .... .... .... = Infolevel Passthru: NT information level request passthrough is not supported .... .... .... .... .0.. .... .... .... = Large ReadX: Large Read andX is not supported .... .... .... .... 0... .... .... .... = Large WriteX: Large Write andX is not supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported Byte Count (BCC): 105 Security Blob: 4E544C4D5353500001000000978208E0... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_NEGOTIATE (0x00000001) Flags: 0xe0088297 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 0... .... .... .... .... .... = Negotiate Target Info: Not set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..0. .... .... .... .... = Negotiate Challenge Accept Response: Not set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 1... .... = Negotiate Lan Manager Key: Set

17 avril 2003

.... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..1. = Negotiate OEM: Set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set Calling workstation domain: NULL Calling workstation name: NULL Native OS: Windows 2000 2195 Native LAN Manager: Windows 2000 5.0 Primary Domain:

Frame 42 (273 bytes on wire, 273 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1030 (1030), Seq: 317720423, Ack: 247182333, Len: 219 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 41 Time from request: 0.000327000 seconds SMB Command: Session Setup AndX (0x73) NT Status: STATUS_MORE_PROCESSING_REQUIRED (0xc0000016) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 2051 Multiplex ID: 705 Session Setup AndX Response (0x73) Word Count (WCT): 4 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 215 Action: 0x0000 .... .... .... ...0 = Guest: Not logged in as GUEST Security Blob Length: 98 Byte Count (BCC): 172 Security Blob: 4E544C4D535350000200000006000600... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_CHALLENGE (0x00000002) Domain: V24 Length: 6 Maxlen: 6 Offset: 48 Flags: 0xe08a8215 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set

Laboratoire de transmission de données / EIG 24

Philippe Logean .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 1... .... .... .... .... .... = Negotiate Target Info: Set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..1. .... .... .... .... = Negotiate Challenge Accept Response: Set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 0... .... = Negotiate Lan Manager Key: Not set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..0. = Negotiate OEM: Not set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set NTLM Challenge: 4C8EF9297CD3822B Reserved: 0000000000000000 Address List Length: 44 Maxlen: 44 Offset: 54 Domain NetBIOS Name: V24 Server NetBIOS Name: V24 Domain DNS Name: v24 Server DNS Name: v24 Native OS: Windows 5.0 Native LAN Manager: Windows 2000 LAN Manager

Frame 43 (352 bytes on wire, 352 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1030 (1030), Dst Port: 139 (139), Seq: 247182333, Ack: 317720642, Len: 298 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 44 SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 2051 Multiplex ID: 769 Session Setup AndX Request (0x73)

17 avril 2003

Word Count (WCT): 12 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 294 Max Buffer: 16644 Max Mpx Count: 50 VC Number: 1 Session Key: 0x00000000 Security Blob Length: 162 Reserved: 00000000 Capabilities: 0x800000d4 .... .... .... .... .... .... .... ...0 = Raw Mode: Read Raw and Write Raw are not supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 0... = Large Files: Large files are not supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..0. .... = RPC Remote APIs: RPC remote APIs are not supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...0 .... .... = Lock and Read: Lock and Read is not supported .... .... .... .... .... ..0. .... .... = NT Find: NT Find is not supported .... .... .... .... ...0 .... .... .... = Dfs: Dfs is not supported .... .... .... .... ..0. .... .... .... = Infolevel Passthru: NT information level request passthrough is not supported .... .... .... .... .0.. .... .... .... = Large ReadX: Large Read andX is not supported .... .... .... .... 0... .... .... .... = Large WriteX: Large Write andX is not supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported Byte Count (BCC): 235 Security Blob: 4E544C4D535350000300000018001800... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_AUTH (0x00000003) Lan Manager Response: 3A44D620AB2744070000000000000000... Length: 24 Maxlen: 24 Offset: 98 NTLM Response: 603D546E7DA8FC46DBFD7923945818A7... Length: 24 Maxlen: 24 Offset: 122 Domain name: V26PRO Length: 12 Maxlen: 12 Offset: 64 User name: alice Length: 10 Maxlen: 10 Offset: 76 Host name: V26PRO Length: 12 Maxlen: 12 Offset: 86 Session Key: FFF876B9676AA2B8D78CB5ED389DD038 Length: 16 Maxlen: 16 Offset: 146 Flags: 0xe0888215 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 1... .... .... .... .... .... = Negotiate Target Info: Set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set

Laboratoire de transmission de données / EIG 25

Philippe Logean

17 avril 2003

.... .... .... ..0. .... .... .... .... = Negotiate Challenge Accept Response: Not set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 0... .... = Negotiate Lan Manager Key: Not set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..0. = Negotiate OEM: Not set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set Native OS: Windows 2000 2195 Native LAN Manager: Windows 2000 5.0 Primary Domain:

Frame 44 (175 bytes on wire, 175 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1030 (1030), Seq: 317720642, Ack: 247182631, Len: 121 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 43 Time from request: 0.000698000 seconds SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 2051 Multiplex ID: 769 Session Setup AndX Response (0x73) Word Count (WCT): 4 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 117 Action: 0x0000 .... .... .... ...0 = Guest: Not logged in as GUEST Security Blob Length: 0 Byte Count (BCC): 74 Security Blob: <MISSING> Native OS: Windows 5.0 Native LAN Manager: Windows 2000 LAN Manager

Laboratoire de transmission de données / EIG 26

Philippe Logean

Annexe 3 Netlogon entre 2 postes Win2k Level 3 Frame 10 (191 bytes on wire, 191 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1030 (1030), Dst Port: 139 (139), Seq: 1013313418, Ack: 2462554430, Len: 137 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 11 SMB Command: Negotiate Protocol (0x72) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc853 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .1.. .... = Long Names Used: Path names in request are long file names .... .... .... .0.. = Security Signatures: Security signatures are not supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 0 Negotiate Protocol Request (0x72) Word Count (WCT): 0 Byte Count (BCC): 98 Requested Dialects Dialect: PC NETWORK PROGRAM 1.0 Dialect: LANMAN1.0 Dialect: Windows for Workgroups 3.1a Dialect: LM1.2X002 Dialect: LANMAN2.1 Dialect: NT LM 0.12 Frame 11 (143 bytes on wire, 143 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1030 (1030), Seq: 2462554430, Ack: 1013313555, Len: 89 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 10 Time from request: 0.000362000 seconds SMB Command: Negotiate Protocol (0x72) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc853 1... .... .... .... = Unicode Strings: Strings are Unicode

17 avril 2003

.1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .1.. .... = Long Names Used: Path names in request are long file names .... .... .... .0.. = Security Signatures: Security signatures are not supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 0 Negotiate Protocol Response (0x72) Word Count (WCT): 17 Dialect Index: 5, greater than LANMAN2.1 Security Mode: 0x03 Max Mpx Count: 50 Max VCs: 1 Max Buffer Size: 16644 Max Raw Buffer: 65536 Session Key: 0x00000000 Capabilities: 0x8000f3fd .... .... .... .... .... .... .... ...1 = Raw Mode: Read Raw and Write Raw are supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 1... = Large Files: Large files are supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..1. .... = RPC Remote APIs: RPC remote APIs are supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...1 .... .... = Lock and Read: Lock and Read is supported .... .... .... .... .... ..1. .... .... = NT Find: NT Find is supported .... .... .... .... ...1 .... .... .... = Dfs: Dfs is supported .... .... .... .... ..1. .... .... .... = Infolevel Passthru: NT information level request passthrough is supported .... .... .... .... .1.. .... .... .... = Large ReadX: Large Read andX is supported .... .... .... .... 1... .... .... .... = Large WriteX: Large Write andX is supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported System Time: Feb 27, 2003 08:39:08.265157699 Server Time Zone: -60 min from UTC Key Length: 0 Byte Count (BCC): 16 Server GUID: 1F7724E6872BAA41A689B64C36457245 Security Blob: <MISSING>

Frame 63 (222 bytes on wire, 222 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1030 (1030), Dst Port: 139 (139), Seq: 1013315964, Ack: 2462556121, Len: 168 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 64 SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs

Laboratoire de transmission de données / EIG 27

Philippe Logean .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 897 Session Setup AndX Request (0x73) Word Count (WCT): 12 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 164 Max Buffer: 16644 Max Mpx Count: 50 VC Number: 1 Session Key: 0x00000000 Security Blob Length: 32 Reserved: 00000000 Capabilities: 0x800000d4 .... .... .... .... .... .... .... ...0 = Raw Mode: Read Raw and Write Raw are not supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 0... = Large Files: Large files are not supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..0. .... = RPC Remote APIs: RPC remote APIs are not supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...0 .... .... = Lock and Read: Lock and Read is not supported .... .... .... .... .... ..0. .... .... = NT Find: NT Find is not supported .... .... .... .... ...0 .... .... .... = Dfs: Dfs is not supported .... .... .... .... ..0. .... .... .... = Infolevel Passthru: NT information level request passthrough is not supported .... .... .... .... .0.. .... .... .... = Large ReadX: Large Read andX is not supported .... .... .... .... 0... .... .... .... = Large WriteX: Large Write andX is not supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported Byte Count (BCC): 105 Security Blob: 4E544C4D5353500001000000978208E0... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_NEGOTIATE (0x00000001) Flags: 0xe0088297 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 0... .... .... .... .... .... = Negotiate Target Info: Not set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..0. .... .... .... .... = Negotiate Challenge Accept Response: Not set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 1... .... = Negotiate Lan Manager Key: Set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set

17 avril 2003

.... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..1. = Negotiate OEM: Set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set Calling workstation domain: NULL Calling workstation name: NULL Native OS: Windows 2000 2195 Native LAN Manager: Windows 2000 5.0 Primary Domain:

Frame 64 (273 bytes on wire, 273 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1030 (1030), Seq: 2462556121, Ack: 1013316132, Len: 219 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 63 Time from request: 0.000345000 seconds SMB Command: Session Setup AndX (0x73) NT Status: STATUS_MORE_PROCESSING_REQUIRED (0xc0000016) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 4097 Multiplex ID: 897 Session Setup AndX Response (0x73) Word Count (WCT): 4 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 215 Action: 0x0000 .... .... .... ...0 = Guest: Not logged in as GUEST Security Blob Length: 98 Byte Count (BCC): 172 Security Blob: 4E544C4D535350000200000006000600... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_CHALLENGE (0x00000002) Domain: V24 Length: 6 Maxlen: 6 Offset: 48 Flags: 0xe08a8215 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 1... .... .... .... .... .... = Negotiate Target Info: Set

Laboratoire de transmission de données / EIG 28

Philippe Logean .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..1. .... .... .... .... = Negotiate Challenge Accept Response: Set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 0... .... = Negotiate Lan Manager Key: Not set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..0. = Negotiate OEM: Not set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set NTLM Challenge: 8D13AA0C3F057704 Reserved: 0000000000000000 Address List Length: 44 Maxlen: 44 Offset: 54 Domain NetBIOS Name: V24 Server NetBIOS Name: V24 Domain DNS Name: v24 Server DNS Name: v24 Native OS: Windows 5.0 Native LAN Manager: Windows 2000 LAN Manager

Frame 65 (414 bytes on wire, 414 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1030 (1030), Dst Port: 139 (139), Seq: 1013316132, Ack: 2462556340, Len: 360 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 66 SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 4097 Multiplex ID: 961 Session Setup AndX Request (0x73) Word Count (WCT): 12 AndXCommand: No further commands (0xff)

17 avril 2003

Reserved: 00 AndXOffset: 356 Max Buffer: 16644 Max Mpx Count: 50 VC Number: 1 Session Key: 0x00000000 Security Blob Length: 224 Reserved: 00000000 Capabilities: 0x800000d4 .... .... .... .... .... .... .... ...0 = Raw Mode: Read Raw and Write Raw are not supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 0... = Large Files: Large files are not supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..0. .... = RPC Remote APIs: RPC remote APIs are not supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...0 .... .... = Lock and Read: Lock and Read is not supported .... .... .... .... .... ..0. .... .... = NT Find: NT Find is not supported .... .... .... .... ...0 .... .... .... = Dfs: Dfs is not supported .... .... .... .... ..0. .... .... .... = Infolevel Passthru: NT information level request passthrough is not supported .... .... .... .... .0.. .... .... .... = Large ReadX: Large Read andX is not supported .... .... .... .... 0... .... .... .... = Large WriteX: Large Write andX is not supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported Byte Count (BCC): 297 Security Blob: 4E544C4D535350000300000018001800... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_AUTH (0x00000003) Lan Manager Response: A1DCC4822B1D6AD9F9B141DABA36085E... Length: 24 Maxlen: 24 Offset: 92 NTLM Response: 48C25F6F31D2C1757CA336B73A089E2E... Length: 92 Maxlen: 92 Offset: 116 Domain name: v24 Length: 6 Maxlen: 6 Offset: 64 User name: alice Length: 10 Maxlen: 10 Offset: 70 Host name: V26PRO Length: 12 Maxlen: 12 Offset: 80 Session Key: 3E933EBE4BE98A2BA166BFCF0DF2A65F Length: 16 Maxlen: 16 Offset: 208 Flags: 0xe0888215 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 1... .... .... .... .... .... = Negotiate Target Info: Set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..0. .... .... .... .... = Negotiate Challenge Accept Response: Not set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set

Laboratoire de transmission de données / EIG 29

Philippe Logean

17 avril 2003

.... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 0... .... = Negotiate Lan Manager Key: Not set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..0. = Negotiate OEM: Not set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set Native OS: Windows 2000 2195 Native LAN Manager: Windows 2000 5.0 Primary Domain:

Frame 66 (175 bytes on wire, 175 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1030 (1030), Seq: 2462556340, Ack: 1013316492, Len: 121 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 65 Time from request: 0.000780000 seconds SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 4097 Multiplex ID: 961 Session Setup AndX Response (0x73) Word Count (WCT): 4 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 117 Action: 0x0000 .... .... .... ...0 = Guest: Not logged in as GUEST Security Blob Length: 0 Byte Count (BCC): 74 Security Blob: <MISSING> Native OS: Windows 5.0 Native LAN Manager: Windows 2000 LAN Manager

Laboratoire de transmission de données / EIG 30

Philippe Logean

Annexe 4 Netlogon entre 2 postes Win2k Level 4 Frame 10 (191 bytes on wire, 191 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1032 (1032), Dst Port: 139 (139), Seq: 3228751112, Ack: 1102346586, Len: 137 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 11 SMB Command: Negotiate Protocol (0x72) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc853 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .1.. .... = Long Names Used: Path names in request are long file names .... .... .... .0.. = Security Signatures: Security signatures are not supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 0 Negotiate Protocol Request (0x72) Word Count (WCT): 0 Byte Count (BCC): 98 Requested Dialects Dialect: PC NETWORK PROGRAM 1.0 Dialect: LANMAN1.0 Dialect: Windows for Workgroups 3.1a Dialect: LM1.2X002 Dialect: LANMAN2.1 Dialect: NT LM 0.12

Frame 11 (143 bytes on wire, 143 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1032 (1032), Seq: 1102346586, Ack: 3228751249, Len: 89 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 10 Time from request: 0.000350000 seconds SMB Command: Negotiate Protocol (0x72) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported

17 avril 2003

Flags2: 0xc853 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .1.. .... = Long Names Used: Path names in request are long file names .... .... .... .0.. = Security Signatures: Security signatures are not supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 0 Negotiate Protocol Response (0x72) Word Count (WCT): 17 Dialect Index: 5, greater than LANMAN2.1 Security Mode: 0x03 Max Mpx Count: 50 Max VCs: 1 Max Buffer Size: 16644 Max Raw Buffer: 65536 Session Key: 0x00000000 Capabilities: 0x8000f3fd .... .... .... .... .... .... .... ...1 = Raw Mode: Read Raw and Write Raw are supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 1... = Large Files: Large files are supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..1. .... = RPC Remote APIs: RPC remote APIs are supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...1 .... .... = Lock and Read: Lock and Read is supported .... .... .... .... .... ..1. .... .... = NT Find: NT Find is supported .... .... .... .... ...1 .... .... .... = Dfs: Dfs is supported .... .... .... .... ..1. .... .... .... = Infolevel Passthru: NT information level request passthrough is supported .... .... .... .... .1.. .... .... .... = Large ReadX: Large Read andX is supported .... .... .... .... 1... .... .... .... = Large WriteX: Large Write andX is supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported System Time: Feb 27, 2003 09:00:52.492683410 Server Time Zone: -60 min from UTC Key Length: 0 Byte Count (BCC): 16 Server GUID: 1F7724E6872BAA41A689B64C36457245 Security Blob: <MISSING>

Frame 78 (222 bytes on wire, 222 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1032 (1032), Dst Port: 139 (139), Seq: 3228753658, Ack: 1102348277, Len: 168 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 79 SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes

Laboratoire de transmission de données / EIG 31

Philippe Logean ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 897 Session Setup AndX Request (0x73) Word Count (WCT): 12 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 164 Max Buffer: 16644 Max Mpx Count: 50 VC Number: 1 Session Key: 0x00000000 Security Blob Length: 32 Reserved: 00000000 Capabilities: 0x800000d4 .... .... .... .... .... .... .... ...0 = Raw Mode: Read Raw and Write Raw are not supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 0... = Large Files: Large files are not supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..0. .... = RPC Remote APIs: RPC remote APIs are not supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...0 .... .... = Lock and Read: Lock and Read is not supported .... .... .... .... .... ..0. .... .... = NT Find: NT Find is not supported .... .... .... .... ...0 .... .... .... = Dfs: Dfs is not supported .... .... .... .... ..0. .... .... .... = Infolevel Passthru: NT information level request passthrough is not supported .... .... .... .... .0.. .... .... .... = Large ReadX: Large Read andX is not supported .... .... .... .... 0... .... .... .... = Large WriteX: Large Write andX is not supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported Byte Count (BCC): 105 Security Blob: 4E544C4D5353500001000000978208E0... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_NEGOTIATE (0x00000001) Flags: 0xe0088297 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 0... .... .... .... .... .... = Negotiate Target Info: Not set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..0. .... .... .... .... = Negotiate Challenge Accept Response: Not set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 1... .... = Negotiate Lan Manager Key: Set

17 avril 2003

.... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..1. = Negotiate OEM: Set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set Calling workstation domain: NULL Calling workstation name: NULL Native OS: Windows 2000 2195 Native LAN Manager: Windows 2000 5.0 Primary Domain:

Frame 79 (273 bytes on wire, 273 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1032 (1032), Seq: 1102348277, Ack: 3228753826, Len: 219 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 78 Time from request: 0.000347000 seconds SMB Command: Session Setup AndX (0x73) NT Status: STATUS_MORE_PROCESSING_REQUIRED (0xc0000016) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 4097 Multiplex ID: 897 Session Setup AndX Response (0x73) Word Count (WCT): 4 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 215 Action: 0x0000 .... .... .... ...0 = Guest: Not logged in as GUEST Security Blob Length: 98 Byte Count (BCC): 172 Security Blob: 4E544C4D535350000200000006000600... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_CHALLENGE (0x00000002) Domain: V24 Length: 6 Maxlen: 6 Offset: 48 Flags: 0xe08a8215 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set

Laboratoire de transmission de données / EIG 32

Philippe Logean .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 1... .... .... .... .... .... = Negotiate Target Info: Set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..1. .... .... .... .... = Negotiate Challenge Accept Response: Set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 0... .... = Negotiate Lan Manager Key: Not set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..0. = Negotiate OEM: Not set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set NTLM Challenge: DEA85EE45068435A Reserved: 0000000000000000 Address List Length: 44 Maxlen: 44 Offset: 54 Domain NetBIOS Name: V24 Server NetBIOS Name: V24 Domain DNS Name: v24 Server DNS Name: v24 Native OS: Windows 5.0 Native LAN Manager: Windows 2000 LAN Manager

Frame 80 (414 bytes on wire, 414 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1032 (1032), Dst Port: 139 (139), Seq: 3228753826, Ack: 1102348496, Len: 360 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 81 SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 4097 Multiplex ID: 961 Session Setup AndX Request (0x73)

17 avril 2003

Word Count (WCT): 12 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 356 Max Buffer: 16644 Max Mpx Count: 50 VC Number: 1 Session Key: 0x00000000 Security Blob Length: 224 Reserved: 00000000 Capabilities: 0x800000d4 .... .... .... .... .... .... .... ...0 = Raw Mode: Read Raw and Write Raw are not supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 0... = Large Files: Large files are not supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..0. .... = RPC Remote APIs: RPC remote APIs are not supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...0 .... .... = Lock and Read: Lock and Read is not supported .... .... .... .... .... ..0. .... .... = NT Find: NT Find is not supported .... .... .... .... ...0 .... .... .... = Dfs: Dfs is not supported .... .... .... .... ..0. .... .... .... = Infolevel Passthru: NT information level request passthrough is not supported .... .... .... .... .0.. .... .... .... = Large ReadX: Large Read andX is not supported .... .... .... .... 0... .... .... .... = Large WriteX: Large Write andX is not supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported Byte Count (BCC): 297 Security Blob: 4E544C4D535350000300000018001800... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_AUTH (0x00000003) Lan Manager Response: 9F23454864EEE4197031507D7F1FFA0D... Length: 24 Maxlen: 24 Offset: 92 NTLM Response: 2A616B1590830B968C2188D3C55271E8... Length: 92 Maxlen: 92 Offset: 116 Domain name: v24 Length: 6 Maxlen: 6 Offset: 64 User name: alice Length: 10 Maxlen: 10 Offset: 70 Host name: V26PRO Length: 12 Maxlen: 12 Offset: 80 Session Key: 10BD045382A15A2415CEFFA5BFDDA146 Length: 16 Maxlen: 16 Offset: 208 Flags: 0xe0888215 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 1... .... .... .... .... .... = Negotiate Target Info: Set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set

Laboratoire de transmission de données / EIG 33

Philippe Logean

17 avril 2003

.... .... .... ..0. .... .... .... .... = Negotiate Challenge Accept Response: Not set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 0... .... = Negotiate Lan Manager Key: Not set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..0. = Negotiate OEM: Not set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set Native OS: Windows 2000 2195 Native LAN Manager: Windows 2000 5.0 Primary Domain:

Frame 81 (175 bytes on wire, 175 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1032 (1032), Seq: 1102348496, Ack: 3228754186, Len: 121 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 80 Time from request: 0.000779000 seconds SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 4097 Multiplex ID: 961 Session Setup AndX Response (0x73) Word Count (WCT): 4 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 117 Action: 0x0000 .... .... .... ...0 = Guest: Not logged in as GUEST Security Blob Length: 0 Byte Count (BCC): 74 Security Blob: <MISSING> Native OS: Windows 5.0 Native LAN Manager: Windows 2000 LAN Manager

Laboratoire de transmission de données / EIG 34

Philippe Logean

Annexe 5 Netlogon entre 2 postes Win2k Level 5 Frame 13 (191 bytes on wire, 191 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1030 (1030), Dst Port: 139 (139), Seq: 2597631364, Ack: 2340843329, Len: 137 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 14 SMB Command: Negotiate Protocol (0x72) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc853 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .1.. .... = Long Names Used: Path names in request are long file names .... .... .... .0.. = Security Signatures: Security signatures are not supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 0 Negotiate Protocol Request (0x72) Word Count (WCT): 0 Byte Count (BCC): 98 Requested Dialects Dialect: PC NETWORK PROGRAM 1.0 Dialect: LANMAN1.0 Dialect: Windows for Workgroups 3.1a Dialect: LM1.2X002 Dialect: LANMAN2.1 Dialect: NT LM 0.12

Frame 14 (143 bytes on wire, 143 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1030 (1030), Seq: 2340843329, Ack: 2597631501, Len: 89 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 13 Time from request: 0.000373000 seconds SMB Command: Negotiate Protocol (0x72) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported

17 avril 2003

Flags2: 0xc853 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .1.. .... = Long Names Used: Path names in request are long file names .... .... .... .0.. = Security Signatures: Security signatures are not supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 0 Negotiate Protocol Response (0x72) Word Count (WCT): 17 Dialect Index: 5, greater than LANMAN2.1 Security Mode: 0x03 Max Mpx Count: 50 Max VCs: 1 Max Buffer Size: 16644 Max Raw Buffer: 65536 Session Key: 0x00000000 Capabilities: 0x8000f3fd .... .... .... .... .... .... .... ...1 = Raw Mode: Read Raw and Write Raw are supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 1... = Large Files: Large files are supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..1. .... = RPC Remote APIs: RPC remote APIs are supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...1 .... .... = Lock and Read: Lock and Read is supported .... .... .... .... .... ..1. .... .... = NT Find: NT Find is supported .... .... .... .... ...1 .... .... .... = Dfs: Dfs is supported .... .... .... .... ..1. .... .... .... = Infolevel Passthru: NT information level request passthrough is supported .... .... .... .... .1.. .... .... .... = Large ReadX: Large Read andX is supported .... .... .... .... 1... .... .... .... = Large WriteX: Large Write andX is supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported System Time: Feb 27, 2003 09:09:01.134315490 Server Time Zone: -60 min from UTC Key Length: 0 Byte Count (BCC): 16 Server GUID: 1F7724E6872BAA41A689B64C36457245 Security Blob: <MISSING>

Frame 60 (222 bytes on wire, 222 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1030 (1030), Dst Port: 139 (139), Seq: 2597633910, Ack: 2340845020, Len: 168 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 61 SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes

Laboratoire de transmission de données / EIG 35

Philippe Logean ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 0 Multiplex ID: 897 Session Setup AndX Request (0x73) Word Count (WCT): 12 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 164 Max Buffer: 16644 Max Mpx Count: 50 VC Number: 1 Session Key: 0x00000000 Security Blob Length: 32 Reserved: 00000000 Capabilities: 0x800000d4 .... .... .... .... .... .... .... ...0 = Raw Mode: Read Raw and Write Raw are not supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 0... = Large Files: Large files are not supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..0. .... = RPC Remote APIs: RPC remote APIs are not supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...0 .... .... = Lock and Read: Lock and Read is not supported .... .... .... .... .... ..0. .... .... = NT Find: NT Find is not supported .... .... .... .... ...0 .... .... .... = Dfs: Dfs is not supported .... .... .... .... ..0. .... .... .... = Infolevel Passthru: NT information level request passthrough is not supported .... .... .... .... .0.. .... .... .... = Large ReadX: Large Read andX is not supported .... .... .... .... 0... .... .... .... = Large WriteX: Large Write andX is not supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported Byte Count (BCC): 105 Security Blob: 4E544C4D5353500001000000978208E0... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_NEGOTIATE (0x00000001) Flags: 0xe0088297 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 0... .... .... .... .... .... = Negotiate Target Info: Not set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..0. .... .... .... .... = Negotiate Challenge Accept Response: Not set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 1... .... = Negotiate Lan Manager Key: Set

17 avril 2003

.... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..1. = Negotiate OEM: Set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set Calling workstation domain: NULL Calling workstation name: NULL Native OS: Windows 2000 2195 Native LAN Manager: Windows 2000 5.0 Primary Domain:

Frame 61 (273 bytes on wire, 273 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1030 (1030), Seq: 2340845020, Ack: 2597634078, Len: 219 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 60 Time from request: 0.000354000 seconds SMB Command: Session Setup AndX (0x73) NT Status: STATUS_MORE_PROCESSING_REQUIRED (0xc0000016) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 4097 Multiplex ID: 897 Session Setup AndX Response (0x73) Word Count (WCT): 4 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 215 Action: 0x0000 .... .... .... ...0 = Guest: Not logged in as GUEST Security Blob Length: 98 Byte Count (BCC): 172 Security Blob: 4E544C4D535350000200000006000600... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_CHALLENGE (0x00000002) Domain: V24 Length: 6 Maxlen: 6 Offset: 48 Flags: 0xe08a8215 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set

Laboratoire de transmission de données / EIG 36

Philippe Logean .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 1... .... .... .... .... .... = Negotiate Target Info: Set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set .... .... .... ..1. .... .... .... .... = Negotiate Challenge Accept Response: Set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 0... .... = Negotiate Lan Manager Key: Not set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..0. = Negotiate OEM: Not set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set NTLM Challenge: 54E633D6ADA9BC31 Reserved: 0000000000000000 Address List Length: 44 Maxlen: 44 Offset: 54 Domain NetBIOS Name: V24 Server NetBIOS Name: V24 Domain DNS Name: v24 Server DNS Name: v24 Native OS: Windows 5.0 Native LAN Manager: Windows 2000 LAN Manager

Frame 62 (414 bytes on wire, 414 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9b:3b:98 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: V24 (10.1.2.24) Transmission Control Protocol, Src Port: 1030 (1030), Dst Port: 139 (139), Seq: 2597634078, Ack: 2340845239, Len: 360 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response in: 63 SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x18 0... .... = Request/Response: Message is a request to the server .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 4097 Multiplex ID: 961 Session Setup AndX Request (0x73)

17 avril 2003

Word Count (WCT): 12 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 356 Max Buffer: 16644 Max Mpx Count: 50 VC Number: 1 Session Key: 0x00000000 Security Blob Length: 224 Reserved: 00000000 Capabilities: 0x800000d4 .... .... .... .... .... .... .... ...0 = Raw Mode: Read Raw and Write Raw are not supported .... .... .... .... .... .... .... ..0. = MPX Mode: Read Mpx and Write Mpx are not supported .... .... .... .... .... .... .... .1.. = Unicode: Unicode strings are supported .... .... .... .... .... .... .... 0... = Large Files: Large files are not supported .... .... .... .... .... .... ...1 .... = NT SMBs: NT SMBs are supported .... .... .... .... .... .... ..0. .... = RPC Remote APIs: RPC remote APIs are not supported .... .... .... .... .... .... .1.. .... = NT Status Codes: NT status codes are supported .... .... .... .... .... .... 1... .... = Level 2 Oplocks: Level 2 oplocks are supported .... .... .... .... .... ...0 .... .... = Lock and Read: Lock and Read is not supported .... .... .... .... .... ..0. .... .... = NT Find: NT Find is not supported .... .... .... .... ...0 .... .... .... = Dfs: Dfs is not supported .... .... .... .... ..0. .... .... .... = Infolevel Passthru: NT information level request passthrough is not supported .... .... .... .... .0.. .... .... .... = Large ReadX: Large Read andX is not supported .... .... .... .... 0... .... .... .... = Large WriteX: Large Write andX is not supported .... .... 0... .... .... .... .... .... = UNIX: UNIX extensions are not supported .... ..0. .... .... .... .... .... .... = Reserved: Reserved ..0. .... .... .... .... .... .... .... = Bulk Transfer: Bulk Read and Bulk Write are not supported .0.. .... .... .... .... .... .... .... = Compressed Data: Compressed data transfer is not supported 1... .... .... .... .... .... .... .... = Extended Security: Extended security exchanges are supported Byte Count (BCC): 297 Security Blob: 4E544C4D535350000300000018001800... NTLMSSP NTLMSSP identifier: NTLMSSP NTLM Message Type: NTLMSSP_AUTH (0x00000003) Lan Manager Response: 610C7B39C6FD74E0ECEA76D2C2C767CF... Length: 24 Maxlen: 24 Offset: 92 NTLM Response: C9D067C70E7C463134B95F0758E5E7E5... Length: 92 Maxlen: 92 Offset: 116 Domain name: v24 Length: 6 Maxlen: 6 Offset: 64 User name: alice Length: 10 Maxlen: 10 Offset: 70 Host name: V26PRO Length: 12 Maxlen: 12 Offset: 80 Session Key: 48FA5ABF4C710953D38E8BAA46393704 Length: 16 Maxlen: 16 Offset: 208 Flags: 0xe0888215 1... .... .... .... .... .... .... .... = Negotiate 0x80000000: Set .1.. .... .... .... .... .... .... .... = Negotiate Key Exchange: Set ..1. .... .... .... .... .... .... .... = Negotiate 128: Set ...0 .... .... .... .... .... .... .... = Negotiate 0x10000000: Not set .... 0... .... .... .... .... .... .... = Negotiate 0x08000000: Not set .... .0.. .... .... .... .... .... .... = Negotiate 0x04000000: Not set .... ..0. .... .... .... .... .... .... = Negotiate 0x02000000: Not set .... ...0 .... .... .... .... .... .... = Negotiate 0x01000000: Not set .... .... 1... .... .... .... .... .... = Negotiate Target Info: Set .... .... .0.. .... .... .... .... .... = Negotiate 0x00400000: Not set .... .... ..0. .... .... .... .... .... = Negotiate 0x00200000: Not set .... .... ...0 .... .... .... .... .... = Negotiate 0x00100000: Not set .... .... .... 1... .... .... .... .... = Negotiate NTLM2 key: Set .... .... .... .0.. .... .... .... .... = Negotiate Challenge Non NT Session Key: Not set

Laboratoire de transmission de données / EIG 37

Philippe Logean

17 avril 2003

.... .... .... ..0. .... .... .... .... = Negotiate Challenge Accept Response: Not set .... .... .... ...0 .... .... .... .... = Negotiate Challenge Init Response: Not set .... .... .... .... 1... .... .... .... = Negotiate Always Sign: Set .... .... .... .... .0.. .... .... .... = Negotiate This is Local Call: Not set .... .... .... .... ..0. .... .... .... = Negotiate Workstation Supplied: Not set .... .... .... .... ...0 .... .... .... = Negotiate Domain Supplied: Not set .... .... .... .... .... 0... .... .... = Negotiate 0x00000800: Not set .... .... .... .... .... .0.. .... .... = Negotiate 0x00000400: Not set .... .... .... .... .... ..1. .... .... = Negotiate NTLM key: Set .... .... .... .... .... ...0 .... .... = Negotiate Netware: Not set .... .... .... .... .... .... 0... .... = Negotiate Lan Manager Key: Not set .... .... .... .... .... .... .0.. .... = Negotiate Datagram Style: Not set .... .... .... .... .... .... ..0. .... = Negotiate Seal: Not set .... .... .... .... .... .... ...1 .... = Negotiate Sign: Set .... .... .... .... .... .... .... 0... = Request 0x00000008: Not set .... .... .... .... .... .... .... .1.. = Request Target: Set .... .... .... .... .... .... .... ..0. = Negotiate OEM: Not set .... .... .... .... .... .... .... ...1 = Negotiate UNICODE: Set Native OS: Windows 2000 2195 Native LAN Manager: Windows 2000 5.0 Primary Domain:

Frame 63 (175 bytes on wire, 175 bytes captured) Ethernet II, Src: 00:04:76:9b:3b:98, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: V24 (10.1.2.24), Dst Addr: 10.1.2.26 (10.1.2.26) Transmission Control Protocol, Src Port: 139 (139), Dst Port: 1030 (1030), Seq: 2340845239, Ack: 2597634438, Len: 121 NetBIOS Session Service SMB (Server Message Block Protocol) SMB Header Server Component: SMB Response to: 62 Time from request: 0.000810000 seconds SMB Command: Session Setup AndX (0x73) NT Status: STATUS_SUCCESS (0x00000000) Flags: 0x98 1... .... = Request/Response: Message is a response to the client/redirector .0.. .... = Notify: Notify client only on open ..0. .... = Oplocks: OpLock not requested/granted ...1 .... = Canonicalized Pathnames: Pathnames are canonicalized .... 1... = Case Sensitivity: Path names are caseless .... ..0. = Receive Buffer Posted: Receive buffer has not been posted .... ...0 = Lock and Read: Lock&Read, Write&Unlock are not supported Flags2: 0xc807 1... .... .... .... = Unicode Strings: Strings are Unicode .1.. .... .... .... = Error Code Type: Error codes are NT error codes ..0. .... .... .... = Execute-only Reads: Don't permit reads if execute-only ...0 .... .... .... = Dfs: Don't resolve pathnames with Dfs .... 1... .... .... = Extended Security Negotiation: Extended security negotiation is supported .... .... .0.. .... = Long Names Used: Path names in request are not long file names .... .... .... .1.. = Security Signatures: Security signatures are supported .... .... .... ..1. = Extended Attributes: Extended attributes are supported .... .... .... ...1 = Long Names Allowed: Long file names are allowed in the response Reserved: 000000000000000000000000 Tree ID: 0 Process ID: 65279 User ID: 4097 Multiplex ID: 961 Session Setup AndX Response (0x73) Word Count (WCT): 4 AndXCommand: No further commands (0xff) Reserved: 00 AndXOffset: 117 Action: 0x0000 .... .... .... ...0 = Guest: Not logged in as GUEST Security Blob Length: 0 Byte Count (BCC): 74 Security Blob: <MISSING> Native OS: Windows 5.0 Native LAN Manager: Windows 2000 LAN Manager

Laboratoire de transmission de données / EIG 38

Philippe Logean

Annexe 6 Echec authentification Kerberos avec IP Frame 170 (339 bytes on wire, 339 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9c:7c:76 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: 10.1.1.10 (10.1.1.10) User Datagram Protocol, Src Port: 1341 (1341), Dst Port: 88 (88) Kerberos Version: 5 MSG Type: AS-REQ Pre-Authentication Type: PA-ENC-TIMESTAMP Value: 303DA003020117A2360434381D9F99DA... Type: PA-PAC-REQUEST Value: 3005A0030101FF Request Options: 0040810010 Client Name: alice@tdeig Type: Unknown name type 0xa Name: alice@tdeig Realm: TDEIG Server Name: krbtgt Type: Service and Instance Name: krbtgt Name: TDEIG End Time: 2037-09-13 02:48:05 (Z) Renewable Until: 2037-09-13 02:48:05 (Z) Random Number: 278202509 Encryption Types Addresses Type: NETBIOS Value: V26<20> (Server service)

17 avril 2003

Type: PA-TGS-REQ Value: 6E82042D30820429A003020105A10302... Request Options: 0040810010 Realm: TDEIG Server Name: HOST Type: Service and Instance Name: HOST Name: 10.1.2.24 End Time: 2037-09-13 02:48:05 (Z) Random Number: 279199905 Encryption Types

Frame 173 (124 bytes on wire, 124 bytes captured) Ethernet II, Src: 00:04:76:9c:7c:76, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: 10.1.1.10 (10.1.1.10), Dst Addr: 10.1.2.26 (10.1.2.26) User Datagram Protocol, Src Port: 88 (88), Dst Port: 1342 (1342) Kerberos Version: 5 MSG Type: KRB-ERROR stime: 2003-03-03 13:19:49 (Z) susec: 938664 Error Code: KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN realm: TDEIG sname: krbtgt Type: Service and Instance Name: krbtgt Name: TDEIG

Frame 171 (1290 bytes on wire, 1290 bytes captured) Ethernet II, Src: 00:04:76:9c:7c:76, Dst: 00:04:76:9b:7a:ab Internet Protocol, Src Addr: 10.1.1.10 (10.1.1.10), Dst Addr: 10.1.2.26 (10.1.2.26) User Datagram Protocol, Src Port: 88 (88), Dst Port: 1341 (1341) Kerberos Version: 5 MSG Type: AS-REP Realm: TDEIG Client Name: alice Type: Principal Name: alice Ticket Version: 5 Realm: TDEIG Service Name: krbtgt Type: Service and Instance Name: krbtgt Name: TDEIG Encrypted Data: Ticket data Type: rc4-hmac CipherText: 71DE0797DC475A87780570A8282A34A5... Encrypted Data: Encrypted Payload Type: rc4-hmac KVNO: 1 CipherText: CF417DE367C4DE30B1FE25442EB586A0...

Frame 172 (1264 bytes on wire, 1264 bytes captured) Ethernet II, Src: 00:04:76:9b:7a:ab, Dst: 00:04:76:9c:7c:76 Internet Protocol, Src Addr: 10.1.2.26 (10.1.2.26), Dst Addr: 10.1.1.10 (10.1.1.10) User Datagram Protocol, Src Port: 1342 (1342), Dst Port: 88 (88) Kerberos Version: 5 MSG Type: TGS-REQ Pre-Authentication

Laboratoire de transmission de données / EIG 39