Amx Network Communications

  • June 2020
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Amx Network Communications as PDF for free.

More details

  • Words: 9,094
  • Pages: 22
Metreau Entry Communicators (view and greet visitors at doors/gates)............................. 248 - 251 SIP Communications Gateways (enables touch panels to make/receive telephone calls).....252 - 257 Accessories........................................................................258 - 265

n e t w o r k / c o m m u n i c at i o n

INTRO D UCTION n e t w o r k / c o m m u n i c at i o n

BRIDGE THE COMMUNICATION GAP Down the Hall or Around the World, AMX Can Make it Happen As the A/V and IT industries continue to converge, AMX continues to bridge the gap between these cutting-edge technologies. Whether your customer wants to deliver voice or video communications down the hall or around the world, AMX has an arsenal of products designed to make it happen. From WiFi and ZigBee to the Apple® iPhone, AMX is leveraging our A/V system experience to take advantage of other new communication and network technologies/products effectively extending our reach and our customers ability to reach around the world – now that’s flexible communication.

SYSTEM DIAGRAM This drawing shows a Communications Gateway connecting an

is acting as a PBX allowing phones and touch panels within a

AMX system to the public telephone network to enable telephone

building to call one another as well as to make outside calls.

calls to/from a touch panel an. The Communications Gateway

AMX SIP Communications Gateway 544

IP Phone

(back panel)

VoIP Service Provider

Public Telephone Network IP Phone

IP Phone

AMX NXA-ENET24 Managed Ethernet Switch

AMX NXD-1000Vi Touch Panel w/ intercom

AMX NXA-WAP250G 802.11b/g Wireless Access Point

AMX MET-ECOM Metreau Entry Communicator

AMX NXD-700Vi Touch Panel w/ Intercom AMX MVP-8400i Touch Panel w/ Intercom Ethernet

AMX NXD-500i Touch Panel w/ Intercom AMX MVP-5200i Touch Panel w/ Intercom

246

Analog Wireless - WiFi

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

INTRO D UCTION n e t w o r k / c o m m u n i c at i o n

Ke y pads Br oc hur e Want to see our Keypads i n a cti o n ? Ju st vi si t http:/ / ww w. amx .c om/ as s e ts / lite r atu r e/ TP.Br ochur e.pdf to do wnl o a d t h e l a te st l i te ra ture .

To u ch Pan el s Br oc h u re Wa n t t o s e e o u r To u c h Pa n e l s i n a c t i o n? J ust v i si t h t t p :/ / www. am x . co m /as s ets / lit e ra t u re / T P. Br o ch u r e. p d f t o d o w n l o a d t h e l a t e st l i t e ra t ure .

SYSTEM DIAGRAM (cont.)

AMX SIP Communications Gateway 544 (back panel)

Analog Phone

Digital/Analog Phone IP Phone

IP Phone

IP Phone

Public Telephone Network

IP Phone Cell Phone

AMX NXA-ENET24 Managed Ethernet Switch

AMX NXD-1000Vi Touch Panel w/ Intercom VoIP Service Provider

Internet

AMX NXA-WAP250G 802.11b/g Wireless Access Point

AMX MET-ECOM Metreau Entry Communicator

Ethernet Analog

AMX MVP-8400i Touch Panel w/ Intercom

Wireless - WiFi

AMX NXD-700Vi Touch Panel w/ Intercom

Wireless - Cell Phone

AMX NXD-500i Touch Panel w/ Intercom

3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

247

n e t w o r k / c o m m u n i c at i o n

MET-ECOM Metreau Entry Communicator MET-ECOM-BK

Black

(FG2180-01-BK)

MET-ECOM-WH

White

(FG2180-01-WH)

MET-ECOM-PB

Polished Brass

(FG2180-01-PB)

MET-ECOM-AB

Antique Brass

(FG2180-01-AB)

MET-ECOM-SS

Stainless Steel

(FG2180-01-SS)

MET-ECOM-BP

Brushed Pewter

(FG2180-01-BP)

EXPerience Kit(s) Available, see page 614

OVERVIEW The Metreau Entry Communicator enables doorbell notification to residents of hotels, homes, or condos from visitors at doors and gates. With the addition of an AMX Modero intercom touch

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ M ET-EC OM . as p a nd cl i c k o n t he “Tra i ni ng” t a b.

panel, residents can see visitors via an integrated one-way color camera, have two-way audio conversations, and open doors or gates. Adding the AMX SIP Communication Gateway will also enable residents to communicate with visitors from any telephone

A CLOSER LOOK

throughout the business or residence. COMMON APPLICATION Ideal for placement in residential outdoor entryways or next to doors to notify residents that visitors have arrived. Vi d eo C am er a

FEATURES • 2-way VoIP audio to an intercom-enabled Modero Touch Panel

S p eak er

• 1-way video conferencing with any Touch Panel • Includes I/Os and Relays • Dual-color LED button provides feedback and doorbell

Du al C o l o r LED S tatu s Ba r ( Ye llo w / R e d )

notification

P u s h b u tto n (Do o r b el l )

• Small form factor and shallow depth make for easy installation • VoIP integration allows an unlimited number of entry

M i cr o p h o n e

communicators to be accommodated per system • Camera angle can be easily positioned during installation to allow viewing of guests at door or gate

C am er a Vi ew i n g An g l e Ad j u s tm en t

• Power over Ethernet • Weather-resistant ONLINE www.amx.com/products/MET-ECOM.asp

Eth er n et C o n n ecti o n 2 M u l ti -P u r p o s e I /Os (5 V ) 2 Lo w Vo l tag e Rel ay s (1 A C o n tact)

248

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

MET- ECOM n e t w o r k / c o m m u n i c at i o n

SPECIFICATIONS DIMENSIONS (HWD)

mounting

5 3/8” x 3 5/8” x 1 9/16” (13.62 cm x 9.13 cm x 3.96 cm) 14.4 oz (408 g)

• The MET-ECOM is installed in one of two ways: • 4 screws for hard surface mounting • 2 expansion clips for pressure mounting

power requirement

colors available

weight

• PoE powered – no local Power Supply needed • IEEE 802.3af Compliant front panel components

• Integrated Color Video Camera • Speaker • Dual Color LED Status Bar: (Yellow/ Red) can be used to provide feedback, to attract attention for action, or as general indicator • Pushbutton (Doorbell) • Microphone

• Black MET-ECOM-BK (FG2180-01-BK) • White MET-ECOM-WH (FG2180-01-WH) • Polished Brass MET-ECOM-PB (FG2180-01-PB) • Antique Brass MET-ECOM-AB (FG2180-01-AB) • Stainless Steel MET-ECOM-SS (FG2180-01-SS) • Brushed Pewter MET-ECOM-BP (FG2180-01-BP) ENVIRONMENTAL

• Operating Temperature: -22º – 140º F (-30º – 60º C) • Heat Dissipation (Typical): 20.5 BTU/hr included accessories

INTEGRATED COLOR VIDEO CAMERA

• QVGA 320 x 240 • Supports Motion JPEG (MJPEG) and H.263 codecs • Viewing Angle: 42º

Installation Kit- includes front mount flange, 4 installation screws (#4-40 x 3.12), 2 Phoenix connectors (female, 3.5mm) and a Ferrite clip

speaker

• 8 Ohm, 2W • 80dB SPL (sound pressure level at 1 meter) • Meets G.711 sound standard microphone

• -40 dB sensitivity, built-in echo cancellation (telephone quality) • Full duplex communication • VoIP Telephony rear panel components

• Camera Viewing Angle Adjustment • Ethernet Port – 10/100 Ethernet with PoE. LEDs show communication activity, connection status, speeds, and mode information: - S PD (speed) – Green LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps - L /A (link/activity) – Orange LED lights On when the Ethernet cables are connected and terminated correctly and blinks when receiving Ethernet data packets • 2 Multi-Purpose I/Os (5V): 2-channel binary I/O ports for contact closure with each input being capable of voltage sensing. Input format is software select able with interactive power sensing for IR ports • 2 Low Voltage Relays (1A contact): 2-channel singlepole single throw relay ports with each relay being independently controlled and supporting up to 2 independent external relay devices

RECOMMENDED ACCESSORIES

DESCRIPTION

PS-POE-AF NXA-ENET24 NXA-ENET24PoE CB-MET-ECOM

Power over Ethernet Injector (FG423-80) Managed Ethernet Switch (FG2178-60) Managed Ethernet Switch, Power Over Ethernet (FG2178-61) Rough-In Box (FG039-12)

PART #



3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

ONLINE

PAGE #

www.amx.com/products/PS-POE-AF.asp www.amx.com/products/NXA-ENET24.asp www.amx.com/products/NXA-ENET24.asp www.amx.com/products/CB-MET-ECOM.asp

240

265

249

n e t w o r k / c o m m u n i c at i o n

MET-ECOM-D Metreau Entry Communicator w/Display MET-ECOM-D-BK

Black

(FG2180-05-BK)

MET-ECOM-D-WH

White

(FG2180-05-WH)

MET-ECOM-D-PB

Polished Brass

(FG2180-05-PB)

MET-ECOM-D-AB

Antique Brass

(FG2180-05-AB)

MET-ECOM-D-SS

Stainless Steel

(FG2180-05-SS)

MET-ECOM-D-BP

Brushed Pewter

(FG2180-05-BP)

EXPerience Kit(s) Available, see page 614

OVERVIEW The Metreau Entry Communicator with display enables doorbell notification to residents of hotels, homes, or condos from visitors at doors and gates. With the addition of an AMX Modero

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ M ET-EC OM -D. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

Intercom-Enabled Touch Panel, residents can see visitors via an integrated one-way color camera, have two-way audio conversations, and open doors or gates. By taking advantage of the integrated 1.6“ display (not weather-resistant), users have the

A CLOSER LOOK

option of placing custom logos, personalized greeting messages, privacy notifications and other announcements (e.g. “Welcome,” “Do Not Disturb,” “Make up Room”) on the display. Adding the AMX SIP Communication Gateway will also enable residents to OLED Di s p l ay

communicate with visitors from any telephone throughout the business or residence.

Vi d eo C am er a

COMMON APPLICATION S p eak er

Ideal for residences to allow display of street address or family name or hotel rooms to display room or number or message for housekeeping or visitors.

Du al C o l o r LED S tatu s Ba r ( Ye llo w / R e d ) P u s h b u tto n (Do o r b el l )

FEATURES • 2-way VoIP audio to an intercom-enabled Modero Touch Panel

M i cr o p h o n e

• OLED display for personalized messaging • 1-way video conferencing with any Touch Panel • Includes I/Os and Relays

C am er a Vi ew i n g An g l e Ad j u s tm en t

• Dual-color LED button provides feedback and doorbell notification • Small form factor and shallow depth make for easy installation • VoIP integration allows an unlimited number of entry communicators to be accommodated per system • Camera angle can be easily positioned during installation to allow viewing of guests at door or gate • Power over Ethernet ONLINE www.amx.com/products/MET-ECOM-D.asp

250

Eth er n et C o n n ecti o n 2 M u l ti -P u r p o s e I /Os (5 V ) 2 Lo w Vo l tag e Rel ay s (1 A C o n tact)

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

MET- ECOM - D n e t w o r k / c o m m u n i c at i o n

SPECIFICATIONS mounting

DIMENSIONS (HWD)

5 3/8” x 3 5/8” x 1 9/16” (13.62 cm x 9.13 cm x 3.96 cm) weight

14.4 oz (408 g)

The MET-ECOM-D is installed in one of two ways: • 4 screws for hard surface mounting • 2 expansion clips for pressure mounting colors available

power requirement

• PoE powered – no local Power Supply needed • IEEE 802.3af Compliant front panel components

• OLED Display • Integrated Color Video Camera • Speaker • Dual Color LED Status Bar: (Yellow/ Red) can be used to provide feedback, to attract attention for action, or as general indicator • Pushbutton (Doorbell) • Microphone oled display

• 4-bit Gray Scale • 1.6” Diagonal Display • 180° Viewing Angle • 2000: 1 Contrast Ratio • Unit stores up to 50 .bmp images

• Black MET-ECOM-BK (FG2408-01-BK) • White MET-ECOM-WH (FG2408-01-WH) • Polished Brass MET-ECOM-PB (FG2408-01-PB) • Antique Brass MET-ECOM-AB (FG2408-01-AB) • Stainless Steel MET-ECOM-SS (FG2408-01-SS) • Brushed Pewter MET-ECOM-BP (FG2408-01-BP) certifications

FCC Class B, CE, IEC60950, RoHS ENVIRONMENTAL

• Operating Temperature: 32º – 104º F (0º – 40º C) • Heat Dissipation (Typical): 20.5 BTU/hr included accessories

Installation Kit- includes front mount flange, 4 installation screws (#4-40 x 3.12), 2 Phoenix connectors (female, 3.5mm) and a Ferrite clip

INTEGRATED COLOR VIDEO CAMERA

• QVGA 320 x 240 • Supports Motion JPEG (MJPEG) and H.263 codecs. • Viewing Angle: 42º speaker

• 8 Ohm, 2W • 80dB SPL (sound pressure level at 1 meter) • Meets G.711 sound standard microphone

• -40 dB sensitivity, built-in echo cancellation (telephone quality) • Full duplex communication • VoIP Telephony rear panel components

• Camera Viewing Angle Adjustment • Ethernet Port – 10/100 Ethernet with PoE. LED show communication activity, connection status, speeds, and mode information: - SPD (speed) – Green LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps - L/A (link/activity) – Orange LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets. • 2 Multi-Purpose I/Os (5V): 2-channel binary I/O ports for contact closure with each input being capable of voltage sensing. Input format is software selectable with interactive power sensing for IR ports. • 2 Low Voltage Relays (1A contact): 2-channel single-pole single throw relay ports with each relay being independently controlled and supporting up to 2 independent external relay devices.

RECOMMENDED ACCESSORIES

DESCRIPTION

PS-POE-AF NXA-ENET24 NXA-ENET24PoE CB-MET-ECOM

Power over Ethernet Injector (FG423-80) Managed Ethernet Switch (FG2178-60) Managed Ethernet Switch, Power Over Ethernet (FG2178-61) Rough-In Box (FG039-12)

PART #



3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

ONLINE

PAGE #

www.amx.com/products/PS-POE-AF.asp www.amx.com/products/NXA-ENET24.asp www.amx.com/products/NXA-ENET24.asp www.amx.com/products/CB-MET-ECOM.asp

240

265

251

n e t w o r k / c o m m u n i c at i o n

CSG-500 SIP Communications Gateway CSG-500

SIP Gateway for 50 Users

(FG2182-01)

OVERVIEW

SPECIFICATIONS

The CSG-500 SIP Communications Gateway is a stand alone PBX

DIMENSIONS (HWD)

(Private Branch Exchange) that allows intercom-enabled Modero

• 1 3/4” x 11 1/2” x 51/2” (4.41 cm x 29.09 cm x 13.82 cm) • RU: 1

Touch Panels to be transformed into full-featured IP phones. The CSG can be configured to support a maximum of 50 users (or extensions) and will support up to 25 concurrent calls. With the CSG and an intercom-enabled Modero Touch Panel, you have

WEIGHT

2.25 lbs (1.02 kg) ENCLOSURE

Metal with black matte finish

access to phone features like call waiting, caller ID, call queuing,

POWER REQUIREMENTS

and voice mail. The CSG supports AMX Session Initiated Protocol

Constant current draw: 2.6 A @ 12 VDC

(SIP)-enabled touch panels, which include the MVP-8400i, NXD-

MEMORY

1000Vi, and NXD-700Vi, as well as third-party SIP phones. The

• 8MB on board serial Flash memory • 64MB 16-bit parallel SDRAM

CSG-500 runs a version of Asterisk which is an industry standard for VoIP PBX systems.

CERTIFICATIONS

COMMON APPLICATION

ENVIRONMENTAL

FCC (Class A), CE, IEC60950, and RoHS

Ideal for installation in residences and commercial applications where there is a need for SIP-enabled touch panels to make or receive phone calls from other touch panels or telephones anywhere in the world.

• Operating Temperature: 0° C (32° F) – 40° C (104° F) • Operating Humidity: 5% – 85% RH Non-Condensing • Storage Temperature: -20° C (-4° F) – 70° C (158° F) • Storage Humidity: 0% – 85% RH Non-Condensing • Heat Dissipation (Typical): 106.6 BTU/hr FRONT PANEL COMPONENTS

FEATURES • Local, long distance, and international calling via VoIP service providers • Caller ID, call waiting, call groups, call queuing, IVR support and voice mail • Uses Session Initiation Protocol, the standard for VoIP technology • Supports both AMX SIP-enabled touch panels and third-party SIP phones • Supports up to 50 users and 25 concurrent calls ONLINE www.amx.com/products/CSG-500.asp T R A INING AVAILAB LE For im por tant ins talla t i o n , co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s, AMX Univer s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts / CSG - 5 0 0 . as p and clic k o n th e “Tra i ni ng” ta b .

252

• Power LED: Indicates whether the unit is turned on and receiving power. • Network LED: Indicates whether a network cable is connected and the speed of the network. • IP Phones LEDs: Indicates whether the corresponding link is connected and the speed of the link. • Analog LEDs: Indicates whether the analog port is installed and the type of port (FXO/FXS) installed. (Not available on all models.) REAR PANEL COMPONENTS

• Power Connector: 5.1mm OD, 2.1mm pin, 12V 3.0A center positive • Configuration Reset Switch: Resets the current configuration to the factory default when pressed. • Console port: 1 RJ45 10/100baseT port for console (craft) port serial control • Network port: 1 RJ45 10/100baseT port for a general (WAN) connection • IP phones ports: 4 RJ45 10/100baseT ports for IP phone connections INCLUDED ACCESSORIES

• PS5.0, Power Supply, 5.0A, 12.0VDC (FG423-31) • CSG SIP Communications Gateway Installation Guide (93-2182-01) • 2 Surface mounting brackets (62-2182-04) • 4 #4-40 X .250 PPH screws (80-0112)

RECOMMENDED ACCESSORIES

DESCRIPTION

PART #

ONLINE

PAGE #

AC-DIN

DIN Rail Mounting Bracket

(FG532-06)

www.amx.com/products/AC-DIN.asp

235

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

C S G - 5 0 0 n e t w o r k / c o m m u n i c at i o n

A C LO SE R LOOK

Analog

Po wer 12VD C

I P P h o n es

Netw o r k

Po w er

N etw or k Por t

Configur ation Por t

IP Ph o n e Inpu t (4 )

Un u s ed Po r ts

3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

253

n e t w o r k / c o m m u n i c at i o n

CSG-544 SIP Communications Gateway CSG-544

SIP Gateway for 50 Users, 4 analog phone input ports, 4 PSTN output ports

(FG2182-02)

OVERVIEW

SPECIFICATIONS

The CSG-544 is a stand alone PBX (Private Branch Exchange)

DIMENSIONS (HWD)

that enables any intercom-enabled Modero Touch Panels to

• 1 3/4” x 11 1/2” x 51/2” (4.41 cm x 29.09 cm x 13.82 cm) • RU: 1

be transformed into full-featured IP phones. It also includes the capability to support 4 analog (POTS) telephones and up to 4 external phone lines from a PSTN (your local telephone company) or analog PBX. The CSG supports AMX Session Initiated Protocol

2.25 lbs (1.02 kg) ENCLOSURE

Metal with black matte finish

(SIP)-enabled touch panels, which include the MVP-8400i, NXD-

POWER REQUIREMENTS

1000Vi, and NXD-700Vi, as well as third-party SIP phones. The

Constant current draw: 2.6 A @ 12 VDC

CSG-544 runs Asterisk, an industry standard for VoIP PBX systems

MEMORY

and can function not only as a PBX, but also as VoIP ATA, or VoIP

• 8MB on board serial Flash memory • 64MB 16-bit parallel SDRAM

gateway. It has 8 analog ports that provide the user with 4 Foreign Exchange Office (FXO) ports and 4 Foreign Exchange Station (FXS) ports. The FXO ports connect to a PSTN and the FXS ports are used to add older technology analog phones to the system. COMMON APPLICATION Ideal for installation where there is a need for SIP-enabled touch panels to make or receive phone calls from other touch panels or telephones as well as support for 4 analog phones and up to 4 lines of local and long distance calling capability via a PSTN. FEATURES • Local, long distance, and international calling via VoIP service providers or local PSTN (where certified) • Caller ID, call waiting, call groups, call queuing, IVR support and voice mail • Uses Session Initiation Protocol, the standard for VoIP technology • Supports AMX SIP-enabled touch panels, third-party SIP phones, and up to 4 analog (POTS) telephones • Supports up to 50 users and 25 concurrent calls ONLINE www.amx.com/products/CSG-544.asp

CERTIFICATIONS

FCC (Class A), CE, IEC60950, and RoHS ENVIRONMENTAL

• Operating Temperature: 0° C (32° F) – 40° C (104° F) • Operating Humidity: 5% – 85% RH Non-Condensing • Storage Temperature: -20° C (-4° F) – 70° C (158° F) • Storage Humidity: 0% – 85% RH Non-Condensing • Heat Dissipation (Typical): 106.6 BTU/hr FRONT PANEL COMPONENTS

• Power LED: Indicates whether the unit is turned on and receiving power. • Network LED: Indicates whether a network cable is connected and the speed of the network. • IP Phones LEDs: Indicates whether the corresponding link is connected and the speed of the link. • Analog LEDs: Indicates whether the analog port is installed and the type ofport (FXO/FXS) installed. (Not available on all models.) REAR PANEL COMPONENTS

• Power Connector: 5.1mm OD, 2.1mm pin, 12V 3.0A center positive • Configuration Reset Switch: Resets the current configuration to the factory default when pressed. • Console port: 1 RJ45 10/100baseT port for console (craft) port serial control • Network port: 1 RJ45 10/100baseT port for a general (WAN) connection • IP phones ports: 4 RJ45 10/100baseT ports for IP phone connections • Analog ports: 4 for FXO and 4 for FXS connections INCLUDED ACCESSORIES

T R A INING AVAILAB LE For im por tant ins talla t i o n , co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s, AMX Univer s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts / CSG - 5 4 4 . as p and clic k o n th e “Tra i ni ng” ta b .

254

WEIGHT

• PS5.0, Power Supply, 5.0A, 12.0VDC (FG423-31) • CSG SIP Communications Gateway Installation Guide (93-2182-01) • 2 Surface mounting brackets (62-2182-04) • 4 #4-40 X .250 PPH screws (80-0112)

RECOMMENDED ACCESSORIES

DESCRIPTION

PART #

ONLINE

PAGE #

AC-DIN

DIN Rail Mounting Bracket

(FG532-06)

www.amx.com/products/AC-DIN.asp

235

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

C S G - 5 4 4 n e t w o r k / c o m m u n i c at i o n

A C LO SE R LOOK

Analog

I P P h o n es

Netw o r k

Po w er

N etw or k Por t

Po wer 12VD C

Configur ation Por t

IP Ph o n e Inpu t (4 )

An al o g P h o n es Li n es I n (4 )

An al o g P h o n es Li n es Ou t (4 )

AMX SIP Communications Gateway 544 (back panel)

Analog Phone

Analog Phone

Public Telephone Network

AMX NXA-ENET24 Managed Ethernet Switch VoIP Service Provider

Cell Phone

AMX NetLinx NI-700 Integrated Controller (back panel)

Internet

Ethernet Analog

AMX NXD-700Vi Touch Panel

Wireless - Cell Phone IP Phone

3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

255

n e t w o r k / c o m m u n i c at i o n

CSG-580 SIP Communications Gateway CSG-580

SIP Gateway for 50 Users, 8 PSTN lines

(FG2182-03)

OVERVIEW

SPECIFICATIONS

The CSG-580 is a stand alone PBX (Private Branch Exchange)

DIMENSIONS (HWD)

that enables any intercom-enabled Modero Touch Panels to

• 1 3/4” x 11 1/2” x 51/2” (4.41 cm x 29.09 cm x 13.82 cm) • RU: 1

be transformed into full-featured IP phones. It also includes the capability to support up to 8 external phone lines from a PSTN (your local telephone company) or analog PBX. With the CSG and an intercom-enabled Modero Touch Panel, you have access to a

2.25 lbs (1.02 kg) ENCLOSURE

Metal with black matte finish

variety of robust calling features. The CSG supports AMX Session

POWER REQUIREMENTS

Initiated Protocol (SIP)-enabled touch panels, which include the

Constant current draw: 2.6 A @ 12 VDC

MVP-8400i, NXD-1000Vi, and NXD-700Vi, as well as third-party IP

MEMORY

phones. The CSG-580 runs Asterisk, an industry standard for VoIP

• 8MB on board serial Flash memory • 64MB 16-bit parallel SDRAM

PBX systems. It has eight analog ports that provide the user with 8 Foreign Exchange Office (FXO) ports to connect to a PSTN.

CERTIFICATIONS

COMMON APPLICATION

ENVIRONMENTAL

Ideal for installation in residences and commercial applications where there is a need for SIP enabled touch panels to make or receive phone calls from other touch panels or telephones anywhere in the world as well as support for up to 8 lines of external local, long distance and international telephone calling capability via a PSTN. FEATURES • Local, long distance, and international calling via VoIP service providers or local PSTN (where certified) • Caller ID, call waiting, call groups, call queuing, IVR support, and voice mail • Uses Session Initiation Protocol, the standard for VoIP technology • Supports both AMX SIP-enabled touch panels and third-party SIP phones • Supports up to 50 users and 25 concurrent calls ONLINE www.amx.com/products/CSG-580.asp

FCC (Class A), CE, IEC60950, and RoHS • Operating Temperature: 0° C (32° F) – 40° C (104° F) • Operating Humidity: 5% – 85% RH Non-Condensing • Storage Temperature: -20° C (-4° F) – 70° C (158° F) • Storage Humidity: 0% – 85% RH Non-Condensing • Heat Dissipation (Typical): 106.6 BTU/hr FRONT PANEL COMPONENTS

• Power LED: Indicates whether the unit is turned on and receiving power. • Network LED: Indicates whether a network cable is connected and the speed of the network. • IP Phones LEDs: Indicates whether the corresponding link is connected and the speed of the link. • Analog LEDs: Indicates whether the analog port is installed and the type of port (FXO/FXS) installed. (Not available on all models.) REAR PANEL COMPONENTS

• Power Connector: 5.1mm OD, 2.1mm pin, 12V 3.0A center positive • Configuration Reset Switch: Resets the current configuration to the factory default when pressed. • Console port: 1 RJ45 10/100baseT port for console (craft) port serial control • Network port: 1 RJ45 10/100baseT port for a general (WAN) connection • IP phones ports: 4 RJ45 10/100baseT ports for IP phone connections • Analog Ports: 8 RJ11 ports for FXO connections INCLUDED ACCESSORIES

T RA INING AVAILAB LE For im por tant ins talla ti o n , co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s, AMX Univ er s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts / CSG - 5 8 0 . as p and clic k o n th e “Tra i ni ng” ta b .

256

WEIGHT

• PS5.0, Power Supply, 5.0A, 12.0VDC (FG423-31) • CSG SIP Communications Gateway Installation Guide (93-2182-01) • 2 Surface mounting brackets (62-2182-04) • 4 #4-40 X .250 PPH screws (80-0112)

RECOMMENDED ACCESSORIES

DESCRIPTION

PART #

ONLINE

PAGE #

AC-DIN

DIN Rail Mounting Bracket

(FG532-06)

www.amx.com/products/AC-DIN.asp

235

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

C S G - 5 8 0 n e t w o r k / c o m m u n i c at i o n

A C LO SE R LOOK

Analog

Po wer 12VD C

I P P h o n es

Netw o r k

Po w er

N etw or k Por t

Configur ation Por t

IP Ph o n e Inpu t (4 )

An al o g P h o n es Li n es Ou t (8 )

3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

257

n e t w o r k / c o m m u n i c at i o n

NXA-WAP250G

MAXIMUM CLIENTS

802.11b/g Wireless Access Point

32 per VAP interface DATA RATE

• 802.11g: 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps per channel • 802.11b: 1, 2, 5.5, 11 Mbps per channel

(FG2255-50)

MODULATION TYPE

• 802.11g: CCK, BPSK, QPSK, OFDM • 802.11b: CCK, BPSK, QPSK NETWORK CONFIGURATION

Infrastructure OPERATING FREQUENCY

• 2.4 – 2.472 GHz (US, Canada, ETSI) • 2.4 – 2.484 GHz (Japan) WIRELESS OUTPUT POWER

OVERVIEW The NXA-WAP250G 802.11b/g Wireless Access Point provides

• 802.11b: 18 dBm (typical) • 802.11g: 17 dBm @ 6 Mbps, 14dBm @ 54 Mbps

both high performance and increased security to support all

WIRELESS RECEIVE SENSITIVITY

Modero wireless touch panels. In addition the NXA-WAP250G

• 802.11b: -90 dBm @ 1 Mbps, -84 dBm @ 11 Mbps • 802.11g: -86 dBm @ 6 Mbps, -68 dBm @ 54 Mbps

provides convenient WLAN access for office/home computers with connection speeds of up to 54Mbps. It is Wi-Fi certified

AC POWER ADAPTER

including enterprise-grade wireless encryption standards such

• Input: 100-240 VAC, 50-60 Hz • Output: 5 VDC, 2 A

as WPA2, WPA, 802.1x, and 64-bit/128-bit WEP.

UNIT POWER SUPPLY

FEATURES

• DC Input: 5 VDC, 2 A maximum • Power Consumption: 6.5 W maximum

• Wireless encryption standards such as enterprise-grade

LED INDICATORS

WPA2, WPA, 802.1x

• POWER (Power), • LAN (Ethernet Link/Activity), • WLAN (Wireless Link/Activity)

• MAC address filtering and 64-bit/128-bit WEP encryption. • Support for multiple VLANS (Virtual Local Area Networks), separate, secure networks can be set up and operated independently of each other through a single WAP.

NETWORK MANAGEMENT

Web-browser ENVIRONMENTAL

• Increases deployment locations using three mode options Access Point Mode, AP/Repeater Mode, or Bridge Mode. Use all three modes in the same network at the same time.

• Operating: 0 – 50 °C (32 to 122 °F) • Storage: -20 – 70 °C (-4 to 158 °F) • Humidity: 15% to 95% (non-condensing) COMPLIANCES

ONLINE www.amx.com/products/NXA-WAP250G.asp

• FCC Part 15B Class B • EN 55022 Class B • EN61000-3-2 • EN61000-3-3

• EN 55024

STANDARDS T R A INING AVAILAB LE For im por tant ins talla t i o n , co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s, AMX Univer s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts / NXA- WAP2 5 0 G. as p and cl i ck o n th e “Tra i ni ng” ta b .

• IEEE 802.3-2005 10BASE-T, 100BASE-TX • IEEE 802.11b, g • Wi-Fi 11b/g, WPA, WPA2, WMM RADIO SIGNAL CERTIFICATION

• FCC Part 15C 15.247, 15.207 (2.4 GHz) • EN 300-328 • EN 301 489-17 • ARIB STD-T66 • IC RSS-210 SAFETY

SPECIFICATIONS

• EN 60950-1

DIMENSIONS (HWD)

• AC power adapter set (includes 4 plug snaps) • Category 5 (CAT5) network cable • NXA-WAP250G Installation Guide • WallMount/Surface mounting installation kit (including two screws)

WEIGHT

8 oz (230 g) MAXIMUM CHANNELS

258

• ETSI: 1-13

• MKK: 1-13

RECOMMENDED ACCESSORIES

DESCRIPTION

PART #

AC-DIN-WAP250G

DIN Rail Mounting Bracket

(FG532-03)



• IEC 60950-1 (CB)

INCLUDED ACCESSORIES

4 1/2” x 2 3/4” x 1” (11.5 cm x 7.1 cm x 2.6 cm)

• FCC/IC: 1-11

• EN 301 489-1



ONLINE

PAGE #

www.amx.com/products/AC-DIN.asp

235

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

N X A - WA P 2 5 0 G n e t w o r k / c o m m u n i c at i o n

A C LO SE R LOOK

WL AN L ED

L AN L ED

POWER LED

3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

259

n e t w o r k / c o m m u n i c at i o n

NXA-WAP2403A

NXA-WAP2405A

Ceiling Mount Omnidirectional Antenna

Rack/Ceiling Mount Omnidirectional Antenna

(FG2255-20)

(FG2255-21)

OVERVIEW

OVERVIEW

The NXA-WAP2403A is a ceiling mount antenna designed for

The NXA-WAP2405A antenna provides residential and

above-ceiling applications that require frequency coverage from

commercial environments the ability to experience additional

2.4 GHz to 2.5 GHz. Designed primarily for corporate settings,

wireless coverage area with the flexibility of placing the antenna in

the NXA-WAP2303A gets the 2.4 GHz signal out of the closet

the ceiling or on top of the equipment rack. In corporate meeting

and into the conference room, training area and any other

rooms, the ceiling tiles allow for quick and easy installation. In the

meeting environment that requires wire-free control capabilities.

home, where homeowners want the antenna out of sight, it can

The ultra flat antenna mounts seamlessly above any ceiling tile,

be positioned on the top shelf of the rack. The NXA-WAP2405A

so it delivers a wireless signal clear and strong within the desired

is designed to cover frequencies from 2400 to 2485 MHz with

area. This setup also keeps the WAP on the rack, where it can be

a VSWR of less than 1.5:1. Its broad elevation plane radiation

easily monitored – there’s no need to climb into the ceiling.

pattern has been shaped to direct energy where it is needed,

The WAP is always within arm’s reach on the rack.

while suppressing the misdirected upper and lower sidelobe energy. The result is excellent coverage for a variety of

FEATURES

in-building applications.

• 3 dBi antenna provides true omni-directional performance • Three foot (0.915 m) UL910 Plenum cable can be installed in the

FEATURES

strictest indoor mounting locations (including air ducts)

• 5.5 dBi Omnidirectional Antenna

• Dual 10-32 stud mount

• An included 1/4-20 insert allows for easy installation onto

• Utilizes UL94-V0 materials which provide the UL’s highest flame

ceiling tile rails

retardant rating; These materials provide maximum placement

• Optimized radiation pattern focuses energy where it is needed,

flexibility while meeting the most stringent building codes

while at the same time, suppressing both upper and lower side

NOTE: The NXA-WAP2403A is not compatible with the NXA-WAP250G

lobe energy • UL Plenum rated RG58 coax cable and UL94-V0 radome meet

ONLINE www.amx.com/products/NXA-WAP2403A.asp

the strictest safety specifications NOTE: The NXA-WAP2405A is not compatible with the NXA-WAP250G

SPECIFICATIONS

ONLINE www.amx.com/products/NXA-WAP2405A.asp

DIMENSIONS (HWD)

5” x 10” x 1/16” (12.7 cm x 25.4 cm x .30 cm) WEIGHT

8 oz (230 g) FREQUENCY

2400-2500 MHz INCLUDED ACCESSORIES

• 3 dBi Omni-directional antenna • Three foot (0.915 m) UL910 Plenum cable

260

SPECIFICATIONS DIMENSIONS (HWD)

9 13/16” x 1” (24.9 cm x 2.54 cm) WEIGHT

8 oz (230 g) FREQUENCY

2400-2485 MHz

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

n e t w o r k / c o m m u n i c at i o n

NXA-WAP2410A

NXA-WAP2413A

Outdoor Enclosed Yagi Antenna

Indoor/Outdoor Directional Panel Antenna

(FG2255-23)

(FG2255-22)

OVERVIEW

OVERVIEW

The NXA-WAP2410A can be used to bridge antennas between

The NXA-WAP2413A antenna is designed to extend the wireless

two networks or for point-to-point communications. It is field

signal and data transmissions of 2.4 GHz transmission devices.

adjustable for vertical or horizontal polarization with matched

This boost in the WAP’s signal helps to meet the wireless

principal plane beamwidths for optimum performance in either

requirements in different applications and environmental settings.

orientations. This design also provides improved front-to-back ratio

It also provides wireless users extensive roaming access. The

and sidelobe suppression that reduces interference. All models

NXA-WAP2413A is designed to cover 2.4 GHz frequencies,

feature a robust mounting structure for consistent performance

obtaining maximum gain with an attractive, low profile package

regardless of weather conditions. The NXA-WAP2410A antenna

and provides efficient and stable performance across the band.

beams a wireless signal from a main residence to smaller structures

Can be mounted indoors or outdoors.

located on the property, where wireless control is desired. The same concept applies for the corporate environment, where

FEATURES

remote locations on a campus may need wireless networking.

• 13 dBi directional antenna • Attractive, low profile housing; Permits the unit to be mounted

FEATURES

in either vertical or horizontal polarity

• 10 dBi directional antenna

• Blends well with indoor and outdoor environments where

• A 30 dB front-to-back ratio permits less physical separation on

aesthetic considerations are important

the tower, thus adding mounting flexibility at installation sites where space is limited • Attractive weather-proof radome is constructed of UV resistant

• Corner exit RG58 pigtail design permits a wide variety of connector options • Utilizes UL94-V0 materials and PC board that provide the UL’s

material; This construction provides robust and trouble-free use

highest flame retardant rating for maximum placement

in harsh outdoor environments

flexibility; Meets most stringent building codes

• Field adjustability allows for both vertical or horizontal polarity;

NOTE: The NXA-WAP2413A is not compatible with the NXA-WAP250G

Eliminates co-channel interference from neighboring radiators • Includes a robust mast mount bracket which is designed to

ONLINE www.amx.com/products/NXA-WAP2413A.asp

withstand up to 125 mph winds NOTE: The NXA-WAP2410A is not compatible with the NXA-WAP250G

ONLINE www.amx.com/products/NXA-WAP2410A.asp

SPECIFICATIONS DIMENSIONS (HWD)

8 13/16” x 8 1/16” x 1 5/8” (22.4 cm x 20.6 cm x 4 cm) WEIGHT

SPECIFICATIONS DIMENSIONS (HWD)

4 1/2” L x 3” OD (11.4 cm x 7.6 cm) WEIGHT

1 lb (500 g)

19.2 oz (544 g) FREQUENCY

2300-2500 MHz INCLUDED ACCESSORIES

• 3 dBi Omni-directional antenna • Three foot (0.915 m) UL910 Plenum cable

FREQUENCY

2400-2485 MHz

3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

261

n e t w o r k / c o m m u n i c at i o n

NXA-WAP10C 10’ RG-58 Plenum Antenna Extension Cable (FG2255-26)

OVERVIEW The NXA-WAP10C is a 10’ RG-58 Plenum Antenna Extension Cable that allows antennas to be extended away from the source device. ONLINE www.amx.com/products/NXA-WAP10C.asp

NXA-WAP2413ACMB Corner Mounting Bracket for the NXA-WAP2413A (FG2255-25)

OVERVIEW The NXA-WAP2413ACMB Corner Mounting Bracket allows the NXA-WAP2413A antenna to be mounted to indoor corner. ONLINE www.amx.com/products/NXA-WAP2413ACMB.asp

NXA-WAP2413AMB Mounting Bracket for the NXA-WAP2413A (FG2255-24)

OVERVIEW The NXA-WAP2413AMB Mounting Bracket provides reinforced mounting for outdoor use of the NXA-WAP2413A antenna. ONLINE www.amx.com/products/NXA-WAP2413AMB.asp

262

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

n e t w o r k / c o m m u n i c at i o n

NXR-ZGW

SPECIFICATIONS

NetLinx ZigBee Gateway ®

DIMENSIONS (HWD)

2 1/2” x 4 1/4” x 1” (63.5 mm x 108.5 mm x 25.0 mm) N o t e : d e p th d o e s n o t i n cl u d e a n te n n a

(FG5791-11)

WEIGHT

5.6 oz. (158.75 g) POWER

• 10.5 – 18 VDC; (13.5 VDC nominal operation voltage) • Power over Ethernet (PoE) Class 2 MEMORY

• 16MB of FLASH OVERVIEW

• 16MB of SDRAM

RADIO SPECIFICATIONS

half duplex Ethernet port capable of Power over Ethernet (PoE),

• Frequency: 2.4GHz • Operating Channels: 11 – 26 • Modulation Technique: DSS • Output Power: Region/country specific • Coverage Area: 165 feet (50.2m)

16 MB of Flash, 16 MB of SDRAM, and a ZigBee module, and is

FIRMWARE/SOFTWARE SPECIFICATIONS

The NetLinx ZigBee Gateway is an Ethernet to ZigBee wireless gateway that allows ZigBee devices to communicate with NetLinx Integrated Controllers. The ZigBee Gateway features a 10BaseT,

controlled via a web server interface. COMMON APPLICATION Ideal for ZigBee devices to communicate with NetLinx Controllers throughout residences or commercial buildings. FEATURES • Can coexist with 802.11 wireless networks without signal interference • Supports 16 wireless channels for interference tolerance • Provides redundant paths of communication • Configurable to include or exclude a ZigBee device on the ZigBee network • 802.3af PoE ONLINE www.amx.com/products/NXR-ZGW.asp T R A INING AVAILAB LE For im por tant ins talla t i o n, co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s, AMX Univer s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts / NXR - ZG W. as p and click o n th e “Tra i ni ng” ta b .

• Management: Built-in browser-based management with User Name/Password authentication • IP Configuration: Static IP or DHCP client (default is static, 192.168.1.140) • Communications: ZigBee, TCP/IP FRONT COMPONENTS

• LEDs - P WR/STATUS: A green LED that blinks to indicate the device is installed and communicating properly. Power ON, but no master connection, is indicated with a solid light, Power OFF is indicated with no light. - L AN: A green LED indicates an Ethernet connection is established. The LED blinks to indicate both sending and receiving information via Ethernet. - RF: The LED is solid when end devices are connected; end devices not connected is indicated with no LED light; the LED blinks to indicate activity. • Antenna Mount: A reverse SMA connection that supports a 2.4GHz antenna. • ID Button: When used in conjunction with NetLinx Studio, sets the device and system numbers for the NXR-ZGW. Press and hold for approximately 30 seconds to return the NXR-ZGW to factory default settings. REAR COMPONENTS

• Power connector : 2-pin 3.5mm captive-wire connector • Power Over Ethernet (PoE) - Powers the device through the CAT5 cable. Both Power and Data can be transmitted simultaneous through the CAT5 cable when using the appropriate equipment. • Ethernet Port: 10BaseT Modular (RJ-45) connector - connects the NXRZGW to your LAN and/or to connect your third party device to the LAN when the NXRZGW is used as a gateway. ENVIRONMENTAL

• Operating Temperature: -30ºC (-22ºF) – 70ºC (158ºF) • Relative Humidity: 5% – 85% non-condensing; intended for indoor use only CERTIFICATIONS

FCC ID: CWU-ZGW, IC ID: 5078A-ZGW, CE, IEC-60950, TELEC INCLUDED ACCESSORIES

• Rubber feet • Velcro mounting strip • 2.4GHZ, MONO, RSMA, 3.5IN, 2.0DBI Antenna (70-0012-SA) • Power Supply (24-5791-SA)

RECOMMENDED ACCESSORIES

DESCRIPTION

PART #

ONLINE

PAGE #

NXR-ZRP AC-DIN-ZIGBEE

NetLinx ZigBee Repeater DIN Rail Mounting Bracket

(FG5791-02) (FG532-05)

www.amx.com/products/NXR-ZRP.asp www.amx.com/products/AC-DIN.asp

264 235

3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

263

n e t w o r k / c o m m u n i c at i o n

NXR-ZRP

SPECIFICATIONS

NetLinx ZigBee Repeater ®

DIMENSIONS (HWD)

1” x 2 1/2” x 3 1/2” (2.3 Cm x 6.4 Cm x 8.7 Cm) N o t e : d e p th d o e s n o t i n cl u d e a n te n n a

(FG5791-02)

WEIGHT

4 oz (113.39 g) POWER

10.5 – 18 VDC; (13.5 VDC nominal operation voltage) MEMORY

• 16 MB of FLASH • 1 MB external memory OVERVIEW

RADIO SPECIFICATIONS

• Frequency: 2.4GHz • Operating Channels: 11 – 26 • Modulation Technique: DSS • Output Power: Region/country specific • Coverage Area: 165 feet (50.2m)

The NetLinx ZigBee Repeater can be added throughout the installation to ensure a comprehensive, broad wireless coverage area with no ”dead spots,” or where extra coverage is needed.

FIRMWARE/SOFTWARE SPECIFICATIONS

COMMON APPLICATION Ideal for increasing the wireless coverage area of ZigBee devices throughout residences or commercial buildings.

• IP Configuration: Static IP or DHCP client (default is static, 192.168.1.140) • Communications: ZigBee, TCP/IP, The NXR-ZRP communicates with a Netlinx master via a NXR-ZGW. FRONT COMPONENTS

FEATURES • Can coexist with 802.11 wireless networks without signal interference • Supports 16 wireless channels for interference tolerance • Provides redundant paths of communication • Configurable to include or exclude a ZigBee device on the ZigBee network ONLINE www.amx.com/products/NXR-ZRP.asp

• LEDs - P WR/STATUS: Power ON is indicated with a solid light. Power OFF is indicated with no light. - RF: The LED is solid when end devices are connected; end devices not connected is indicated with no LED light; the LED blinks to indicate activity. - ICSP: The LED is solid when ICSP connection is in place with the NetLinx master. • Antenna Mount: A reverse SMA connection that supports a 2.4GHz antenna. • ID Button: Press and hold for approximately 10 seconds to return the NXR-ZRP to factory default settings. REAR COMPONENTS

T R A INING AVAILAB LE For im por tant ins talla t i o n , co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s, AMX Univer s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts / NXR - ZR P. as p and clic k o n th e “Tra i ni ng” ta b .

• Power connector : 2-pin 3.5mm captive-wire connector • Power Over Ethernet (PoE) - Powers the device through the CAT5 cable. Both Power and Data can be transmitted simultaneous through the CAT5 cable when using the appropriate equipment. • Ethernet Port: 10BaseT Modular (RJ-45) connector - connects the NXRZGW to your LAN and/or to connect your third party deviceto the LAN when the NXRZGW is used as a gateway. ENVIRONMENTAL

• Operating Temperature: -30ºC (-22ºF) – 70ºC (158ºF) • Relative Humidity: 5% – 85% non-condensing; intended for indoor use only

AMX Mio Modero R-4 Remote Control

CERTIFICATIONS

IC ID: 5088A-ZRD, CE, IEC-60590, TELEC INCLUDED ACCESSORIES

AMX NetLinx Zigbee Repeater

• Rubber feet • Velcro mounting strip • 2.4GHZ, MONO, RSMA, 3.5IN, 2.0DBI Antenna (70-0012-SA) • Power Supply (24-5791-SA)

AMX NetLinx Zigbee Gateway AMX NetLinx NI-2100 Integrated Controller (back view of controller)

264

RECOMMENDED ACCESSORIES

DESCRIPTION

PART #

ONLINE

PAGE #

AC-DIN-ZIGBEE

DIN Rail Mounting Bracket

(FG532-05)

www.amx.com/products/AC-DIN.asp

263

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

n e t w o r k / c o m m u n i c at i o n

CB-MET-ECOM Rough-In Box for Metreau Entry Communicator (FG039-12)

OVERVIEW

SPECIFICATIONS

Allows Metreau Entry Communicators to be mounted directly to

DIMENSIONS (HWD)

studs/pre-wall. Includes a wall box and mounting screws.

4 5/8” x 3 1/16” x 1 15/16” (11.7 cm x 7.8 cm x 4.6 cm)

COMMON APPLICATION Ideal for mounting in doorways, entryways or other locations where visitors to a residence or commercial facililty would request entry. FEATURES • Mounts directly to studs/pre-wall • Includes wall box and mounting screws ONLINE www.amx.com/products/CB-MET-ECOM.asp

3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

265

Related Documents