8017031.pdf

INNOVATIONS MAGAZINE Edition 2016

Innovations, application reports, technologies and more - www.sickinsight.com

THE RIGHT SOLUTIONS FOR MORE FLEXIBILITY AND EFFICIENCY Many paths, one goal: “Sensor Intelligence.” epitomizes our clear focus on sensor technology as a data provider for the intelligent factory, thus making it the most fundamental module for providing the highest possible levels of transparency in the supply chain. With our broad product and solution portfolio, we make sure that you are able to capture the necessary data reliably, evaluate it intelligently, and employ it purposefully for your application: •• To produce higher-quality goods in a more efficient and flexible way while saving resources •• To enable better tracking of goods •• To implement innovative safety concepts In the context of Industry 4.0, sensors that communicate not just at controller level but also at the higher data level are needed. Our sensors can already do both: They send data reliably to the PLC, but also to higher-level data and software systems. This ensures that this proven technology can continue to be used going forward but you can take advantage of the additional benefits on a gradual basis. In the latest issue of SICKinnovations, we present products, systems, and services which already provide the right solutions for your latest challenges.

2

INNOVATIONS | SICK

8017031/2016-10-21 Subject to change without notice

PRODUCT INNOVATIONS: START BENEFITTING FROM THE ADVANTAGES OF INTELLIGENT SENSORS TODAY WITH SICK For us, innovation means creating something new or improving something that already exists and, in so doing, setting new standards on the market and making our customers stronger. We achieve innovation by delivering intelligent solutions and sophisticated services which are tailored precisely to meet the individual needs of our customers, thus helping them to keep on moving forward. The starting point is always an innovative product. You can find the latest 29 here.

CONTENT 2D vision

Fork sensors

Inclination sensors

InspectorP63x . . . . . . . . . . . . . . 4 picoCam . . . . . . . . . . . . . . . . . 8 midiCam . . . . . . . . . . . . . . . . . 9

WFS . . . . . . . . . . . . . . . . . . . 15

TMS/TMM61 . . . . . . . . . . . . . . 24 TMS/TMM88 . . . . . . . . . . . . . . 25

Inductive proximity sensors IMC . . . . . . . . . . . . . . . . . . . 16

RFID RFU65x . . . . . . . . . . . . . . . . . 5

Position sensors MPS-C . . . . . . . . . . . . . . . . . . 17

SICK AppSpace SICK AppStudio . . . . . . . . . . . . . 6

Non-contact safety switches STR1 . . . . . . . . . . . . . . . . . . 18

Sensor Integration Machine SIM4000 . . . . . . . . . . . . . . . . 7

Safety locking devices TR10 Lock . . . . . . . . . . . . . . . 19

Long range distance sensors Dx1000 . . . . . . . . . . . . . . . . . 10

Functional safety systems Safeguard Detector . . . . . . . . . . 20

Displacement measurement sensors OD1000 . . . . . . . . . . . . . . . . . 11

Scattered light dust measuring devices FWE200DH . . . . . . . . . . . . . . . 21

MultiTask photoelectric sensors PowerProx . . . . . . . . . . . . . . . . 12

Gas flow meters FLOWSIC600-XT . . . . . . . . . . . . 22

Measuring automation light grids MLG-2 ProNet . . . . . . . . . . . . . . 13

Incremental encoders DUS60 . . . . . . . . . . . . . . . . . 26

Measuring wheel encoders DUV60 . . . . . . . . . . . . . . . . . . 27

Driver assistance systems APS . . . . . . . . . . . . . . . . . . . 28

Quality control systems Inline Code Matcher . . . . . . . . . . 29

Security systems RAM . . . . . . . . . . . . . . . . . . . 30

Track and trace systems VML . . . . . . . . . . . . . . . . . . . 34

Analytics Solutions Baggage Analytics . . . . . . . . . . . 32

Flow sensors DOSIC® . . . . . . . . . . . . . . . . . 23

Pattern sensors PS30 . . . . . . . . . . . . . . . . . . 14

8017031/2016-10-21 Subject to change without notice

INNOVATIONS | SICK

3

InspectorP63x 2D vision

A B C D E F H I J K L M N O P Q R S T

PROGRAMMABLE. COMPACT. VERSATILE. Product description The InspectorP63x is a programmable 2D camera for most industrial image processing tasks. Boasting an image resolution of 1 to 2 megapixels, a compact IP 67 housing, and a flexible, high-quality optical design, it is the ideal

solution for demanding automation environments. Thanks to the SICK AppSpace development environment, which is based on the outstanding HALCON image processing libraries, the software is highly flexible.

At a glance • 1.3 and 1.9 MP programmable 2D

• Aiming laser, beeper and feedback

cameras • Flexible S- and C-mount lenses and integrated illumination • 4Dpro interfaces

• Powered by HALCON 12 library • Scripted in SICK AppStudio • Web operator interface

spot

Your benefits • SICK AppSpace development framework offers full software flexibility for tailored solutions • World-leading HALCON 12 library runtime license included • Fast, high-resolution programmable 2D cameras ensure maximum performance

• Flexible optical design enables analysis of small features at high speeds

• Unique operator interaction possibilities thanks to powerful set of convenience features • Smooth commissioning with customized operator interface and SICK AppManager

-- www.sick.com/InspectorP63x For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

4

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

RFID RFU65x

THE MEASURING RFID DEVICE WITH INTEGRATED PASSAGE AND DIRECTION DETECTION Product description The RFU65x RFID read/write device saves space, time, and costs when it comes to identifying vehicles and vehicle parts. This compact device is able to determine the angle from which the transponder responds. The RFU65x also features an integrated logic unit that processes data on the basis of algorithms. This makes it possible to

deduce entry detection information plus a vehicle’s direction of movement when it drives through a receiving goods door, for example. Unlike other devices, the RFU65x does not require any additional external antennae. Not only does this cut down on costs, it also simplifies and accelerates application processes in logistics and the automotive industry.

A B C D E F

At a glance • Compact UHF RFID read/write device in accordance with ISO/IEC 18000-63 • Positioning and angle detection by RFID transponders • Integrated algorithms deduce the direction of entry and movement based on numerous measured values

• Supports data and fieldbus interfaces that are typically used in the industry

Your benefits • UHF RFID transponders demonstrate

• Fulfills the requirements of the IP67

outstanding reading reliability thanks to correct transponder assignment, including integrated entry detection plus direction output. • Space-saving, compact device that does not require any additional antennae • Easy to integrate into industrial fieldbuses with 4Dpro connectivity

enclosure rating (“outdoor”) and is rugged and durable • Compatible with other SICK RFID read/write devices, making it highly flexible • Additional software functions for the device can be programmed in the SICK software environment and integrated into the device

-- www.sick.com/RFU65x For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

5

H I J K L M N O P Q R S T

SICK AppStudio SICK AppSpace

A B C D E F H I J K L M N O P Q R S T

BY DEVELOPERS FOR DEVELOPERS Product description The SICK AppStudio is used for developing customer-specific applications on programmable SICK devices. Available programming technologies for creating sensor apps are graphical Flow Editor and Lua script programming, as well as C++ or Java. HALCON image processing procedures can also be integrated. Helpful tools such as emulators, debuggers, resource monitors, and an extensive

range of documentation and demo apps make the development process easy. The user interface for machine operators can be created individually as a web GUI using the graphical ViewBuilder. The PackageBuilder combines all the software components to make a single package that safely defines access rights.

At a glance • Overview illustrations of input windows and status information • AppExplorer for displaying and managing sensor app components • Graphical Flow Editor for block programming

• AppMonitor for visualizing system performance and usage

• ViewBuilder for easily creating a web GUI

Your benefits • The editor with convenient auto-

• CPU and memory usage visualization

completion function makes program creation easier and quicker • The emulator functionality makes programming possible even when no programmable SICK device is connected to the PC • Save time when searching for programming errors using the debugger

provides information about the performance of the connected devices in the functioning state • Quick integration and creation of sensor apps thanks to many example programs

-- www.sick.com/SICK_AppStudio For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

6

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Sensor Integration Machine SIM4000

FLEXIBLE. INTELLIGENT. COMMUNICATIVE. Product description The SIM4000 Sensor Integration Machine – part of the SICK AppSpace eco-system – is opening up new possibilities for application solutions. Data from SICK sensors and cameras can be merged into a point cloud, evaluated, archived, and transmitted. 8-gigabit Ethernet interfaces are available for 2D or 3D cameras, and in some cases feature a voltage supply over Ethernet (PoE).

Sensors can be integrated via IO-Link for distance and height measuring purposes. Thanks to the high-performance multi-core processor featuring hardware support, the SIM4000 enables image preprocessing and handling of input and output signals in real time. The integrated HALCON library also makes it possible to find solutions for sophisticated image processing tasks.

At a glance • Wide range of connections with 25 in-

• Precise synchronization of input and

terfaces for Ethernet-based fieldbuses, cameras, illumination, sensors, encoders, and more besides • 10-gigabit Ethernet interfaces for rapid image transmission

• Illumination control and supply • IO-Link master connections • Enclosure rating IP 65

output signals

Your benefits • Tailored application development

• Real-time-capable hardware reduces

with SICK AppSpace • High-performance, innovative application solutions through merging of sensor and camera data • The integrated HALCON library opens up a whole host of image processing possibilities for every industrial field of application • Recording, evaluation, and archiving of data from multiple cameras and sensors, enabling quality control, process analysis, and predictive maintenance for vertical integration in Industry 4.0

integration work in, for example, time-critical robotics applications • Quick and easy commissioning thanks to prefabricated cables with M12 connections

-- www.sick.com/SIM4000 For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

7

A B C D E F H I J K L M N O P Q R S T

picoCam 2D vision

A B C D E F H I J K L M N O P Q R S T

ULTRA-COMPACT, INDUSTRIAL DIGITAL CAMERAS WITH GIGE INTERFACE Product description The picoCam streaming camera family is ideally suited to applications where space is restricted. So that it can be used in industrial environments, the picoCam has a screw-fit RJ45 GigE interface – the standard for industrial image processing – as well as industry-grade plug connectors for the voltage supply and trigger signals. As an alternative, it is also possible to operate it with just one cable measuring up to 100 m in

length using Power over Ethernet (PoE). The picoCam is available with 1, 2, or 4 megapixel resolution and in color, monochrome, or NIR (optional) variants. CMOS image sensors use global shutter technology and enable multiple image sections (AOI). Image recording and transmission are decoupled in the internal 60 MB memory bank and multi-camera applications are therefore supported.

At a glance • Ultra-compact housing • Power over Ethernet (PoE) • Wide-range voltage supply 12 V DC ... 24 V DC

• Screw-fit RJ45 GigE interface

• Screw-fit Hirose plug connector for the voltage supply and digital inputs and outputs • Color, monochrome, and NIR variants • Connection for C mount lenses

Your benefits • The picoCam family is ideal for use on the Sensor Integration Machine (SIM), to support complex image processing tasks • Ideal for multi-camera applications, e.g., several picoCams on the SIM • Simple operation using just one connecting cable thanks to PoE

• Reliable, even in very tight spaces • Intuitive operation via the I2D Software Suite for Windows from SICK

• Simple plug and play installation on the SIM thanks to pre-assembled cables • Wide range of C mount lenses available

-- www.sick.com/picoCam For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

2D vision midiCam

RUGGED, INDUSTRY-GRADE DIGITAL CAMERAS WITH GIGE INTERFACE Product description With IP 67 enclosure rating, the midiCam streaming camera family is ideally suited to use in harsh industrial environments. This is why the midiCam has an M12 GigE interface – the standard for industrial image processing – as well as industry-grade M12 connections for the voltage supply and trigger signals. As an alternative, it is also possible to operate it with just one cable measuring up to 100 m in length using Power over

Ethernet (PoE). The midiCam is available with 1 or 2 megapixel resolution and in color, monochrome, or NIR (optional) variants. CMOS image sensors use global shutter technology and enable multiple image sections (AOI). Image recording and transmission are decoupled in the internal 60 MB memory bank and multi-camera applications are therefore supported.

At a glance • Rugged housing with IP 67 enclosure

• M12 plug connector for the voltage

rating • Power over Ethernet (PoE) • Wide-range voltage supply 12 V DC ... 24 V DC • M12 plug connector for the GigE interface

supply and digital inputs and outputs • Color, monochrome, and NIR variants • Connection for C mount lenses

Your benefits • The midiCam family is ideal for use on the Sensor Integration Machine (SIM), supporting complex image processing tasks • Ideal for multi-camera applications, e.g., several midiCams on the SIM • Simple operation using just one connecting cable thanks to PoE • Can be used reliably, even when you need ruggedness in harsh industrial environments and IP 67 enclosure rating

• Intuitive operation via the I2D Software Suite for Windows from SICK

• Simple plug and play installation on the SIM thanks to pre-assembled cables • Wide range of C mount lenses available

-- www.sick.com/midiCam For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

9

A B C D E F H I J K L M N O P Q R S T

Dx1000 Long range distance sensors

A B C D E F H I J K L M N O P Q R S T

GREAT PERFORMANCE AT GREAT DISTANCE Product description For reliable distance measurement, both indoors and outdoors: The Dx1000 long range distance sensor with infrared laser is ideal for use on cranes, for detecting vehicles in traffic applications, and for measuring hot steel slabs in a steel mill. The Dx1000 features exceptional versatility in any application – HDDM+ (High Definition Distance Measurement with multi-echo technology) enables

distance measurements with high measurement accuracy, even in the presence of ambient light, rain, snow, and fog. It excels at axial object tracking and quickly detecting the edges of objects moved in from the side. The device does all this at measurement cycle times of down to one millisecond, making it ideal for use in control loops.

At a glance • Long range distance sensor with infrared laser featuring HDDM+ technology • Measures natural objects (DT1000) or reflectors (DL1000) • Dust-proof and waterproof housing (IP 65 and IP 67) made of highly corrosion-resistant aluminum alloy

• Configurable digital inputs and outputs, analog output, RS-422/SSI

• Measures hot surfaces (DT1000)

Your benefits • Reliable distance measurement

• Fast, safe commissioning using a

indoors and outdoors enables high system throughput • Multi-echo technology can suppress undesirable reflections – enabling use in a wider range of applications • Comprehensive options for adjustments enable perfect adaptation to the individual measuring task

graphical touch display, convenient SOPAS ET user interface and red alignment laser • A small number of device variants (standardization) accommodating a wide range of requirements keeps costs down • Laser class 1 and therefore eye-safe

-- www.sick.com/Dx1000 For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

10

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Displacement measurement sensors OD1000

THE SOLUTION FOR PRECISE MEASUREMENT OVER LONG DISTANCES Product description With its sensing range of up to 1 m, the OD1000 displacement measurement sensor sets new standards in precise distance measurement with triangulation. Its high performance data ensures a smooth production process and allows a high level of productivity in a wide range of applications, almost regardless of the surface quality, color, or object

structure. The clear OLED display with four operating keys simplifies commissioning and optimizes the machine availability. As a standalone device with integrated evaluation, IO-Link interface, and additional functions, the OD1000 simplifies machine integration, saves additional evaluation effort, and paves the way for sustainable production.

A B C D E F

At a glance • Large measuring range of up to 1 m • Simple setting via OLED display or SOPAS configuration software • Standalone device without external amplifier unit • Rugged metal housing

• Adjustable analog output (mA/V) and push-pull switching output with IO-Link • Precise measurement regardless of color or surface • Versatile mounting possibilities

Your benefits • Optimization of the process quality due to high precision and linearity over the entire measuring range • Quick commissioning due to variable mounting and innovative operating concept • Simple and cost-saving integration via OLED display and IO-Link interface

• Suitable for harsh ambient condition due to rugged metal housing

• High machine availability thanks to reliable, quick, and precise measurement results on a wide range of surfaces • Intelligent measured value filter and analysis algorithm for safe and stable measurement in every application

-- www.sick.com/OD1000 For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

11

H I J K L M N O P Q R S T

PowerProx MultiTask photoelectric sensors

A B C D E F H I J K L M N O P Q R S T

THE NEW HOME OF SENSING RANGE Product description The powerful PowerProx MultiTask photoelectric sensors offer all of the advantages of time-of-flight technology in the world’s smallest sensor housing to date, giving maximum flexibility when designing machines. Objects being conveyed at high speed, small and flat objects, and jet-black or shiny objects can now be reliably detected at sensing ranges between 5 cm and 4 m. PowerProx also

provides stable detection results over a large detection angle. The “Distance”, “Speed”, “Precision”, “Small”, “Micro”, and “WTT280L” versions are designed to be used in different applications. This means that PowerProx always offers perfect solution – for empty bay detection via rapid counting right through to use in handling and assembly.

At a glance • Time-of-flight technology • Laser class 1, red and infrared light • Sensing range for object detection: 5 cm to 4 m • Switching frequencies of up to 1,000 Hz • Minimum distance between object and background: 13 mm

• VISTAL™ housing • Up to 3 independently adjustable switching outputs or one analog output • IO-Link available as an option (distance value, 8 switching points, smart sensor functions)

Your benefits • Reliable object detection at high sensing ranges and large detection angles, e.g., even with shiny or jetblack surfaces • Highly visible light spot simplifies alignment of the red-light versions • Precise, simple adjustment with potentiometer, teach-in button, or display

• Laser class 1 and therefore eye-safe • High levels of availability and durability. Rugged even when subjected to high mechanical loads thanks to VISTAL™ housing. • The world’s smallest sensor housing ensures great flexibility when designing machines • IO-Link extends functionality

-- www.sick.com/PowerProx For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

12

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Measuring automation light grids MLG-2 ProNet

LESS EFFORT AND GREATER FLEXIBILITY VIA INTEGRATED INTERFACES Product description With increasing levels of automation of systems or machines, the cabling work required also rises, which in turn increases the amount of project planning, installation, commissioning and maintenance work required. MLG-2 ProNet from SICK offers all the advantages of a measuring automation light grid now with integrated interfaces such as PROFINET, EtherCAT, Ethernet/IP, CANopen and PROFIBUS. Commissioning is quick

and easy thanks to suitable function blocks. In the configuration software SOPAS, solutions are pre-installed allowing even complex applications like lens width measurement to be easily configured. Automatic format conversion via fieldbus is also possible. With MLG2 ProNet, SICK is offering a suitable solution for a variety of applications in production logistics and machinery construction.

At a glance • System self-diagnosis possible • High-resolution light grid with 2.5 mm, 5 mm, 10 mm, 20 mm, 25 mm, 30 mm, and 50 mm beam separation

• “High speed scan” function with three scan speeds • “Transparent mode” function for detection of transparent objects • Data compression: Run length coding

Your benefits • Reduced cabling work saves time in

• Configuration software SOPAS for

planning and installation. • Acyclic data communication enables access to diagnostic functions and format conversion. • Integrated interfaces and suitable function blocks reduce commissioning work • “High measurement accuracy” function for reliable detection of small objects • “Transparent mode” function for reliable detection and measurement of transparent objects

more functions and direct access to MLG-2 ProNet • “High speed scan” function offers fast response time for safe detection of fast objects • Extensions or adjustments are easily carried out, guaranteeing flexibility and future viability

-- www.sick.com/MLG-2_ProNet For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

13

A B C D E F H I J K L M N O P Q R S T

PS30 Pattern sensors

A B C D E F

FROM PATTERN DETECTION TO RAPID POSITION IDENTIFICATION Product description The PS30 is a proximity scanning optoelectronic sensor. Distinctive, taught-in patterns in an image are used as a reference for the subsequent reliable detection and positioning of objects. A stable switching signal is generated at high speed thanks to new technology without special reference marks. The

markless sensor is ideal for applications in the packaging industry. User-friendly configuration is offered via the sensor’s control panel, via the SOPAS configuration software, or by using the machine controller’’s PLC/HMI via an Ethernet connection. Engineering tools for configuration and diagnosis are available.

At a glance • Rugged housing with rotatable male

H I J K L M N O P Q R S T

connector • Scanning speed up to 10 m/s • Reproducibility of up to 0.15 mm (2 Sigma) • Ethernet interface for integration into the machine controller

• Integrated, visible object illumination • Operating elements with cleartext display

• Software tools for visualized configuration and diagnosis of the sensor

• Automatic configuration when changing objects

Your benefits • Reliable detection, including of

• Quick and easy sensor alignment

complex images, reduces system downtimes and rejects • More freedom with respect to packaging design • More efficient use of the product surface, as no print marks are necessary • Faster and easier to change formats by teaching in saved formats • Reliable production processes thanks to diagnosis of the teach-in and process quality

thanks to a visible light spot and notches on the housing • Short set-up times thanks to simple configuration via display, SOPAS web controls, or with PLC/HMI via Ethernet and using the software tools provided

-- www.sick.com/PS30 For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

14

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Fork sensors WFS

PRECISE DETECTION FOR OPTIMUM LABEL DETECTION Product description The slim, forked shape of the WFS has been specially developed for the requirements of the labeling process. The design allows the sensor to be mounted directly on the edge of a label dispenser. Difficulty in detecting the label gap is finally eliminated – the sensor’s switch-

ing threshold can be taught-in while the label strip is running. This sophisticated operating concept means the sensor can be adjusted to different labels quickly, easily, and reliably. The fast response time guarantees exceptional repeat accuracy.

At a glance • Housing with slim forked shape • Simple and precise setting of the switching threshold via IO-Link, teach-in button, or plus/minus buttons • Light/dark switching function

• Fast response time: 50 μs • PNP or NPN switching output • Plastic housing with IP 65 enclosure rating

• Smart sensor with integrated IO-Link interface

Your benefits • Flexible and simple mounting directly

• Thanks to IO-Link or external teach-

on the edge of a label dispenser ensures a high level of accuracy in the process • Small housing allows simple installation even where space is limited • User-friendly adjustment allows easy and quick commissioning • Fast response times enable precise detection – even at very high track speeds

in, the switching threshold can be adapted while the process is running, increasing process reliability • Easy to access data from the PLC via IO-Link

-- www.sick.com/WFS For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

15

A B C D E F H I J K L M N O P Q R S T

IMC Inductive proximity sensors

A B C D E F H I J K L M N O P Q R S T

FOUR TIMES THE SWITCHING CAPABILITY WITH INDUCTIVE INTELLIGENCE Product description The inductive, intelligent, and, thanks to IO-Link 1.1, communication-enabled IMC proximity sensors offer a whole host of new options to make handling applications easier and more reliable in every industry. Up to four individual switching points or windows including the hysteresis can be set. Equipped with two freely programmable switching end stages, an IMC can therefore replace several

conventional devices. Adjustable switchon and switch-off delays help to reliably suppress unwanted switching pulses in harsh environments. The additional onboard functions, such as logic modules, temperature measurement, counters, or time measurement enable complex tasks to be completed with ease directly in the sensor.

At a glance • Types: M8 to M30; IQ10 and IQ12 • Four programmable switching points or windows at an Sn of up to 20 mm • Freely programmable output function • Enclosure rating: IP 68, IP 69K • Temperature range: –40 °C to +75 °C

• Rugged stainless-steel or VISTAL housing

• Logic, counter, time measurement, or temperature monitoring function

• IO-Link 1.1

Your benefits • Advanced diagnostic options ensure stable processes • Programmable switching thresholds and windows make predictive maintenance easier and reduce machine downtimes • Switching point teaching enables precise object positioning without the need for time-consuming adjustment

• Reduced costs as fewer sensors or sensor variants are required

• Stable signals thanks to integrated debounce function

• Reduced project planning and cabling work as complex tasks are easy to implement directly in the process • Future-proof thanks to IO-Link 1.1 communication

-- www.sick.com/IMC For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

16

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Position sensors MPS-C

THE INTELLIGENT C-SLOT POSITION SENSOR Product description MPS-C position sensors continuously detect the piston position of pneumatic actuators using a direct, non-contact method. They can be mounted in Cslots without the need for additional accessories. The sensor settings can be adjusted during installation and during operation later on, using a teach field or IO-Link. The sensors continuously supply data via analog outputs

or IO-Link, enabling flexible machine concepts and making it possible to solve tasks in areas such as quality monitoring and process control in conjunction with pneumatic cylinders and drives. This continuous transfer of position data upgrades the functionality of the pneumatic cylinders by making them more intelligent – and, as a result, more versatile.

At a glance • Position sensor for direct mounting in C-slots on pneumatic cylinders and grippers • Sensor variants with measuring ranges of 25 mm to 200 mm

• Analog outputs (for current or voltage), switching output, and IO-Link

• Mounting on other cylinder types (e.g., round body cylinders) is possible with adapters

Your benefits • Rapid mounting and exchange of sen-

• More flexibility compared to con-

sors with drop-in • Straightforward installation as no additional mechanical components or position elements are required • Can be integrated into the machine at any time, as the sensor is attached to the cylinder externally • Easy adjustment of sensor settings and parameters during operation using a teach pad or IO-Link

ventional cylinder sensors, as it is possible to define multiple switching points in the smallest of spaces • Excellent reliability thanks to the rugged sensor design and non-contact measurement principle • Advanced diagnostic options thanks to data transmission via IO-Link

-- www.sick.com/MPS-C For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

17

A B C D E F H I J K L M N O P Q R S T

STR1 Non-contact safety switches

A B C D E F

COMPACT, SAFE, AND FLEXIBLE Product description The STR1 transponder safety switch has monitored semiconductor outputs (OSSDs) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. The STR1 is available with three codes. Universally coded sensors accept all actuators. An actuator must

be taught into both the uniquely coded and permanently coded variants; this is the only actuator that the STR1 then accepts. The sensor has three active sensor surfaces.The actuator comes in three different sizes. This allows the STR1 to offer maximum mounting flexibility.

At a glance

H I J K L M N O P Q R S T

• Response range of up to 14 mm • Small housing with flexible mounting options • Sensor activation possible from three sides • Three different actuators available

• Universally coded, uniquely coded, and permanently coded sensors

• PL e (EN ISO 13849), SIL3 (IEC 61508)

• Reliable series connection of up to 30 sensors possible

Your benefits • High level of flexibility when mounting the sensor and actuator • Reduced need for storage, as one sensor is suitable for a wide range of different applications • High level of manipulation protection due to individually coded actuator • High level of machine availability due to large door offset tolerance and high level of shock and vibration resistance

• Economical solution due to series connection of up to 30 sensors

• Fast diagnosis via LED status indicator

• Long product service life due to low-wastage and low-maintenance configuration

-- www.sick.com/STR1 For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

18

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Safety locking devices TR10 Lock

TRIED-AND-TESTED SAFETY WITH ADVANCED FEATURES – SAFETY LOCKING DEVICE WITH RFID MONITORING Product description The TR10 Lock safety locking device combines the best features of triedand-tested technology: outstanding manipulation-proofing for the RFID technology that monitors the actuator, plus a high-strength, highly reliable mechanical locking mechanism. The sensor’s selfmonitoring semiconductor outputs (OSSDs) can be cascaded and, thanks to a PL e performance level (EN ISO 13849), ensure maximum safety – for both door

monitoring and locking monitoring. Two codings are available, affording applications more flexibility. The universally coded sensors accept all suitable actuators, while uniquely coded sensors only allow actuators that have previously been taught in. The bistable solenoid coil consumes only a small amount of power and produces no heat when the system is either locked or unlocked.

At a glance • PL e for door and locking monitoring

• Power to lock or power to release

(EN ISO 13849) • 1,690 N locking force • RFID actuator with low or high coding level (EN ISO 14119) • Enclosure rating IP 67, IP 69K

variants • Reliable series connection of safety outputs (OSSDs) • Four actuation directions • Flexi-Loop-ready

Your benefits • The high coding level of the actuator

• Slim housing design with flexible

meets all the EN ISO 14119 requirements relating to manipulation-proofing without additional measures • Self-monitoring semiconductor outputs (OSSDs) afford a high level of safety • Reliable series connection reduces installation work • Rugged IP 69K housing ideally suited to use in heavily contaminated environments

actuator installation options enables simple machine integration • Bistable solenoid coil consumes only a small amount of power and produces no heat when the system is either locked or unlocked • Fast diagnosis via LED status indicator

-- www.sick.com/TR10_Lock For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

19

A B C D E F H I J K L M N O P Q R S T

Safeguard Detector Functional safety systems

A B C D E F

NATURAL PROTECTION BY MATERIAL Product description Increase safety and productivity of packaging machines with the modular Safeguard Detector safety system. The Safeguard Detector consists of the Flexi Soft safety controller and two MultiPulse photoelectric sensors. The Safeguard Detector securely detects whether a movable physical protective

device is located at a previously defined position, e.g., the packaging material in the carton magazine of packaging machines. If there is sufficient material in the carton magazine, then it is not possible to reach into the hazardous area while the machine is running.

At a glance • Certified up to SILCL2 (EN 62061),

H I J K L M N O P Q R S T

PL d (EN ISO 13849) • Highly available sensors in miniature enclosure • Secure detection of objects with a remission of 6% to 90%

• Detection range: maximum 100 mm • Pulse frequency 2 Hz or 10 Hz • Background and foreground suppression protects against manipulation

• Logic evaluation of redundant sensor signals

Your benefits • Rugged sensors, flexible machine controller and reliable safety in one system • Certified safety system saves time and costs. An additional safety assessment is not necessary. • Less costs compared to complex mechanical protection • Minimum space requirements thanks to an ultra-compact sensor enclosure

• Easily adaptable: Make format changeovers in no time

• Modular system: Facilitates retrofitting of older machines

• Secure investment: Control can be flexibly expanded and used for additional functions, e.g. filling level measurement of the carton magazine

-- www.sick.com/Safeguard_Detector For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

20

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Scattered light dust measuring devices FWE200DH

RELIABLE DUST MEASUREMENT IN WET GASES Product description The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas. The gas is extracted via a sampling probe and heated above dew point. Droplets in the gas are vaporized, making it impossible for them to falsify the mea-

surement results. The highly sensitive scattered light measurement principle enables even very low dust concentrations to be measured. The FWE200DH meets the requirements of EN 14181 and EN 15267.

At a glance • For very low to medium dust concen-

• Easy parameterization and con-

trations • Gas sampling and return combined in one probe • Contamination check • Automatic monitoring of zero and reference point

venient operation – optionally via supplemental remote unit • Integrated system diagnostics for early detection of maintenance requirements

Your benefits • Reliable and approved dust measurement in wet gas • Efficient operation due to very few expendable items and very low installation requirements • Low-maintenance thanks to the absence of moving parts coming into contact with aggressive gas

• Compact design for installation directly on the duct

• Simple commissioning directly at the measuring site due to automatic measuring range adjustment • Very long life cycle due to compact design

-- www.sick.com/FWE200DH For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

21

A B C D E F H I J K L M N O P Q R S T

FLOWSIC600-XT Gas flow meters

A B C D E F H I J K L M N O P Q R S T

THE PERFECT MATCH Product description As the follow-up to the successful FLOWSIC600, the FLOWSIC600-XT ultrasonic gas flow measuring device is setting new standards in its market segment. The FLOWSIC600-XT is available in variants with 4, 4+1, 4+4, and 8 measurement paths to meet the requirements of every application, whether it is being used as a stand-alone or system solution. In addition to the OIML R 137 Class 1.0 requirements, the FLOWSIC600XT meets the requirements of Class

0.5 and AGA9 in their entirety. The FLOWSIC600-XT contains i-diagnostics™ – an intelligent application diagnostics function – and PowerIn Technology™, which enables continuous measurement operation for up to three weeks in the event of a mains voltage failure. These functions help ensure usability and unparalleled operational safety – and what’’s more, the equipment offers the very best possible measurement accuracy and long-term stability.

At a glance • User-friendly product family • Automatic correction of pressure and temperature effects • Available for all operating conditions • PowerIn Technology™ for reliable backup operation

• Intelligent application diagnostics with i-diagnostics™

• Extendable with flow computers per connect-and-go

Your benefits • Low measurement uncertainty in every application • Excellent measurement data reliability and availability • The right ultrasonic gas flow measuring device for every application – without compromise

22

compact systems

• Quick and easy commissioning and checks

-- www.sick.com/FLOWSIC600-XT

®

C

• Simple device integration – even in

US

Innovations | SICK

For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

Flow Flowsensors  sensors DOSIC® DOSIC®

THE COMPACT STAINLESS-STEEL SENSOR FOR FLEXIBLE FLOW MEASUREMENT Product description The non-contact DOSIC® flowmeter detects the flow volume of conductive and non-conductive liquids based on ultrasonic technology. With its measurement channel and stainless-steel housing, the ultrasonic flowmeter is suitable for measuring tasks in hygienic environments. The compact and rugged design offers a wide variety of application possibilities, including in those where space restric-

tions or aggressive media play a role. Installation is quick and easy, and does not require medium calibration. The seal-fee, self-draining measuring tube enhances process reliability. Up to two configurable digital and analog outputs as well as the IO-Link interface ensure the right initial situation. The DOSIC® is EHEDG-certified and FDA-compliant.

At a glance • Flow measurement for water and oilbased liquids • Seal-free stainless-steel 316L sensor with Ra ≤ 0.8 • Straight, self-draining measuring tube • Compact design with short installation lengths

• Configurable digital outputs • Temperature measurement • IP 67/69 enclosure rating, CIP/SIPcompatible, IO-Link version 1.1

Your benefits • Flexible measurement system for all industries and liquids • Versatile use for conductive and nonconductive liquids and temperature measurement • Short installation lengths and a compact design enable installation in applications with limited space • Food-safe thanks to rust-free stainless steel and hygienic design

• Quick installation without medium calibration

• User-friendly application thanks to rotatable housing and display

• Straight measuring tube reduces pressure loss, thus reducing energy costs

-- www.sick.com/DOSIC For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

23

A B C D E F H I J K L M N O P Q R S T

TMS/TMM61 Inclination sensors

A B C D E F H I J K L M N O P Q R S T

PRECISE INCLINATION MEASUREMENT IN A COMPACT DESIGN Product description The TMS61 one-dimensional inclination sensor and the TMM61 two-dimensional inclination sensor are setting new standards with respect to size, flexibility, and performance. In their small, rugged plastic housings, the sensors offer excellent resolution and accuracy – what’s more, this is achieved over the entire measuring range and in an extremely wide range of ambient conditions. The

CANopen interface enables a whole host of device parameters to be adapted, allowing the sensor to be perfectly tailored to the application. The new PGT-12-Pro handheld programming tool from SICK makes configuration much easier. As a result, the user is ready to go in just a few clicks and can cut out the time-consuming task of configuring the sensor via the control system.

At a glance • Compact inclination sensor with measuring range of 360° (single-axis) or ±90° (dual-axis) • Compensated cross sensitivity and configurable vibration suppression • Convenient CANopen interface

• UV-resistant, impact-proof plastic housing

• High resolution (0.01°) and accuracy (±0.1° typ.)

• Programmable with the PGT-12-Pro

Your benefits • Inclination measurement in two axes without mutual interference • Single-axis inclination measurement over 360° with configurable zero point • Flexible adaptation to the application via the CANopen interface or PGT-12Pro handheld programming tool • Reliable output signal thanks to configurable digital filter

• Precise leveling thanks to high accuracy over the entire measuring range

• Compact design for applications with limited space

• Can also be used in the harshest ambient conditions thanks to fully encapsulated electronics

-- www.sick.com/TMS_TMM61 For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

24

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Inclination sensors TMS/TMM88

HIGH-PRECISION INCLINATION MEASUREMENT FOR HARSH AMBIENT CONDITIONS Product description The TMS88 one-dimensional inclination sensor and the TMM88 two-dimensional inclination sensor take measurements with an accuracy of up to +/- 0.02°. The inclination value is provided either via a current or voltage interface with a linearized output signal or via a standardized CANopen interface. The PGT-12-Pro

handheld programming tool allows the inclination sensors to be configured with ease, tailoring them perfectly to the application. The sensors are available in UV-resistant plastic housings and in rugged aluminum housings.

A B C D E F

At a glance • Inclination sensor with measuring range of 360° (single-axis) or ±90° (dual-axis) • Compensated cross sensitivity and configurable vibration suppression • Freely configurable current or voltage interface or convenient CANopen interface

• Accuracy up to ±0.02° • Plastic or aluminum housing • Programmable with the PGT-12-Pro

Your benefits • Inclination measurement in two axes

• Suitable for precise leveling tasks

without mutual interference • Single-axis inclination measurement over 360° with configurable zero point • Flexible adaptation to the application via the CANopen interface or PGT-12Pro handheld programming tool • Reliable output signal thanks to configurable digital filters

thanks to high accuracy over the entire measuring range and exceptional temperature stability • Can also be used in the harshest ambient conditions thanks to fully encapsulated electronics

-- www.sick.com/TMS_TMM88 For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

25

H I J K L M N O P Q R S T

DUS60 Incremental encoders

A B C D E F H I J K L M N O P Q R S T

ENCODER WITH VERSATILE CONFIGURATION FOR MACHINE AXES APPLICATIONS Product description The DUS60 is a rotary incremental encoder with built-in DIP switch configuration for the resolution, output voltage, and counting direction. The DUS60 configuration switches reduce the number of variants, enable easy replacement and quick commissioning, and increases the likelihood that spare parts will be in stock – all without any additional programming tools. The on-board status and signal LEDs and optional fault

output quickly indicate the functionality of the encoder, minimizing time required for both installation and troubleshooting. The DUS60 offers solid shaft and hollow bore mounting with rotating connectors or universal cables for quick and flexible mechanical installation. With resolutions up to 2,400 pulses, the DUS60 is ideal for factory and logistics automation applications.

At a glance • Solid shaft or hollow bore incremental encoder • DIP switches for configuring resolution, signal output, • And counting direction • Universal 4.5 V ... 30 V supply

• LEDs that indicate encoder status and output signal

• Rotatable M12 male connector, 4-pin or 8-pin, or universal cable outlet

• Optional fault output directly from encoder

Your benefits • Quickly commission the encoder

• Anti-dither functionality maintains a

using the built-in DIP switches. No additional programming tool or laptop required • Status and signal LEDs quickly indicate whether the encoder is properly connected, functional, or needs to be replaced • Universal power supply and a rotatable connector reduce the number of variants required and provide increased installation flexibility

high level of productivity also in high vibration applications • Compatible with existing and low-cost input cards with output types like Clockwise/Counterclockwise and Signal/Direction

-- www.sick.com/DUS60 For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

26

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Measuring wheel encoders DUV60

QUICKLY CONFIGURABLE AND VERSATILE MEASURING WHEEL INCREMENTAL ENCODER Product description The DUV60 is a measuring wheel encoder with DIP switch configuration, designed to be optimized for conveyor and web feedback. The ability to configure the output voltage, resolution, and counting direction reduces the number of variants, enables easy replacement and quick commissioning, and increases the likelihood that spare parts will be in stock – all without any additional

programming tools. The on-board status and signal LEDs and optional fault output quickly indicate the functionality of the encoder, minimizing time required for both installation and troubleshooting. The DUV60 offers a range of mounting configurations for dual or single wheel applications, making the DUV60 the ideal solution for conveyor, web, and logistics applications.

At a glance • Single or dual wheel measuring wheel encoder • DIP switches for programming resolution, signal output, • And counting direction • Universal 4.5 V ... 30 V supply

• LEDs that indicate encoder status and output signal.

• M12 male connector, 4- or 8-pin, or universal cable outlet

• Optional fault output directly from encoder

Your benefits • Quickly commission the encoder using the built-in DIP switches. No additional programming tool or laptop required • Status and signal LEDs quickly indicate whether the encoder is properly connected, functional, or needs to be replaced • Universal voltage supply and multiple bracket options for the measuring wheel encoder provide increased installation flexibility

• Maintain a high level of productivity using the anti-dither functionality

• Compatible with existing and low-cost input cards with output types like Clockwise/Counterclockwise and Signal/Direction

-- www.sick.com/DUV60 For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

27

A B C D E F H I J K L M N O P Q R S T

APS Driver assistance systems

A B C D E F H I J K L M N O P Q R S T

DRIVER ASSISTANCE DURING PUSHBACK, MAINTENANCE, AND MANEUVER TOWING Product description The APS (Aircraft Protection System) driver assistance system is designed for cost-effective retrofitting on aircraft tractors. The system provides reliable warnings against collisions with other ground vehicles and airport infrastructure. It also provides the tractor driver with assistance during pushback, maintenance, and maneuver towing. The display shows all the obstacles that are in the vicinity of the aircraft. In the event that an obstacle is detected

within the aircraft’s towing corridor, the driver receives an audible and visual warning so that the aircraft tractor can be stopped in order to avoid a collision. Obstacles that pose a risk of collision are highlighted. This provides the driver with support when driving into a hangar, for example. It also enables hazardous situations to be detected more quickly and the correct driving decision to be made in good time.

At a glance • Towing corridor monitoring for collision awareness • Warning system provides the driver with warnings of collisions and initiates a response

• Obstacles are shown on a display • Configurable safety distances • High driver acceptance • Self-diagnostics for straightforward troubleshooting and maintenance

Your benefits • Prevention of collisions and accidents reduces aircraft repair costs and downtime • Excellent aircraft tractor availability enables smooth, efficient pushback, maintenance and maneuver towing

• Integrated installation wizard simplifies installation and operation

• Self-diagnostics makes system maintenance easy

-- www.sick.com/APS For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

28

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Quality control systems Inline Code Matcher

RIGHT PRODUCT – RIGHT PACKAGING Product description The Inline Code Matcher quality control system ensures that the right packaging is used for the right product by reading a code on the packaging. As an easy-to-integrate stand-alone solution, the system is especially suited for retrofitting into

existing plants. The modular structure with multiple Lector6xx code readers opens up a wide range of applications especially in multi-track plants. Customizations are possible upon request.

At a glance • Code comparison (1D/2D) during the production process • Intuitive operation via HMI with touch display • Easy-to-integrate stand-alone solution

• Statistic display and display of the last fault patterns

• Multi-track plants supported • User-friendly batch change on the fly or with a hand-held scanner

Your benefits • Reliable batch assignment for

• Product changes during the process

increased food safety – the right product in the right packaging • Low overall costs thanks to simple installation and operation • Easy retrofitting of existing plants thanks to stand-alone solution

for a high level of flexibility and short set-up times • Maximum system throughput thanks to reliable code reading • Process control through the display of crucial quality parameters

-- www.sick.com/Inline_Code_Matcher For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

A B C D E F

I n n o v a t i o n s  | S I C K

29

H I J K L M N O P Q R S T

RAM Security systems

A B C D E F H I J K L M N O P Q R S T

ACCESS CONTROL AND AUTHORIZATION MANAGEMENT EVEN AT LONG SCANNING RANGES Product description The RAM security system (RFID Access Control Management) facilitates flexible configuration and management of access rights for persons and vehicles. You can make the changes quickly and conveniently on a conventional PC with the help of ECS management software. The RFU62x RFID, implemented as a desktop device, makes transponder management easy. The corresponding

access authorization is passed on automatically to the access points and saved there. EMS access management software facilitates communication between a PC and an RFU62x or RFU63x RFID. This software is installed directly using a microSD memory card. Thanks to UHF technology, the transponder can be even be read at long scanning ranges.

At a glance • Management of up to 1,000 tran-

• Transponder communication with

sponders and 20 access points • EMS installed directly onto the RFU62x or RFU63x using a microSD memory card with copy protection

the EPCglobal standard UHF class 1 generation 2 • RFU62x or RFU63x with IP 67 enclosure rating

Your benefits • Ready for immediate use thanks to simple configuration and management of access rights • Low complexity for users, since the ECS software interconnects multiple RFU62x or RFU63x units • Investment security thanks to fulfillment of the EPCglobal standard UHF class 1 generation 2, resulting in lower additional costs when using additional transponders • ECS runs on a conventional PC

• Can be relied upon to function in many application areas and environments – even outdoors – thanks to industry-grade RFID technology

-- www.sick.com/RAM For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

30

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

Track and trace systems VML

DIMENSIONING WITH PERSPECTIVE Product description The VML track and trace system (a light-grid-based volume measurement system) is your positioning and object measurement solution for challenging applications. Based on light grids, the VML enables accurate determination of the smallest enveloping cuboid of objects, irrespective of their surface properties. This means that it is a

particularly reliable solution for measuring transparent objects and objects wrapped in film. The modular structure ensures full compatibility with existing solutions from SICK and enables future enhancements. This guarantees a high degree of flexibility, which enables individual adaptation to specific applications.

A B C D E F

At a glance • Measurement accuracy of up to 5 mm x 5 mm x 2.5 mm (L x W x H) at 1 m/s, and up to 5 mm x 5 mm x 5 mm (L x W x H) at 2 m/s. • Maximum object size 2,600 mm x 1,200 mm x 1,200 mm (L x W x H)

• Protection class up to IP65 • High degree of integration thanks to the MSC800 controller

Your benefits • Reliable measurement of objects,

• Reliable measurement properties

regardless of their surface properties – particularly transparent and very dark objects • Accurate in-line measurement of objects

thanks to receiver and transmitter modules • Short MTTR reduces maintenance, lowers operating costs and increases system throughput

-- www.sick.com/VML For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

8017031/2016-10-21 Subject to change without notice

I n n o v a t i o n s  | S I C K

31

H I J K L M N O P Q R S T

Baggage Analytics Analytics Solutions

A B C D E F

FOR A WORLD IN MOTION Product description SICK’s Baggage Analytics software provides comprehensive, real-time performance monitoring of automated baggage handling operations in the airport industry. From tracking an individual piece of luggage on a conveyor - to processing thousands of items of baggage per day, Baggage Analytics helps airports and airlines drive timely decisions

in high-volume applications. Throughout bag drop, security screening, sorting or transfer operations, this software helps boost traceability, accuracy and efficiency. Valuable trending data, high resolution images for reconciliation, and track and trace information are all easily within reach.

At a glance

H I J K L M N O P Q R S T

• Collect, store and analyze data from intelligent sensors • Search and share data and images from anywhere on your network • Monitor real-time or historical performance and system health

• Filter data based on time, location or key attributes

• Set thresholds and health alerts

Your benefits • Access real-time performance metrics to reduce operating costs and increase system uptime • Improve security and customer satisfaction by expediting location of lost or misplaced bags • Validate baggage integrity at key operation points to reduce fraud and liability

• Identify the root cause of processing issues with real-time monitoring

• Use data analysis tools to gain deeper insight into system performance and identify trends • Expedite response time through alerts for no-reads or other abnormal conditions

-- www.sick.com/Baggage_Analytics For more information, simply enter the link or scan the QR code and get direct access to technical data, CAD design models, operating instructions, software, application examples, and much more.

32

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

NOTES

8017031/2016-10-21 Subject to change without notice

Innovations | SICK

33

NOTES

34

Innovations | SICK

8017031/2016-10-21 Subject to change without notice

SERVICES

REGISTER AT WWW.SICK.COM TODAY AND ENJOY ALL THE BENEFITS m

Select products, accessories, documentation and software quickly and easily.

m m m

Create, save and share personalized wish lists.

m m

Overview of all quotations and orders.

m

View the status of quotations and orders at any time. Receive e-mail notifications of status changes. 

m m

Easily repeat previous orders.

View the net price and date of delivery for every product. Requests for quotation, ordering and delivery tracking made easy. Direct ordering: submit even very complex orders in moments.

Conveniently export quotations and orders to work with your systems.

SERVICES FOR MACHINES AND SYSTEMS: SICK LifeTime Services Our comprehensive and versatile LifeTime Services are the perfect addition to the comprehensive range of products from SICK. The services range from product-independent consulting to traditional product services.

Consulting and design Safe and professional

Product and system support Reliable, fast and on-site

Verification and optimization Safe and regularly inspected

Upgrade and retrofits

Easy, safe and economical

Training and education

Practical, focused and professional

8017031/2016-10-21 Subject to change without notice

Innovations | SICK

35

8017031/2016-10-21 ∙ CDGMC_GD ∙ Pre USmod en46

SICK AT A GLANCE SICK is a leading manufacturer of intelligent sensors and sensor solutions for industrial applications. With more than 7,400 employees and over 50 subsidiaries and equity investments as well as numerous agencies worldwide, we are always close to our customers. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in various industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services round out our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.”

Worldwide presence: Australia, Austria, Belgium, Brazil, Canada, Chile, China, Czech Republic, Denmark, Finland, France, Germany, Great Britain, Hungary, India, Israel, Italy, Japan, Malaysia, Mexico, Netherlands, New Zealand, Norway, Poland, Romania, Russia, Singapore, Slovakia, Slovenia, South Africa, South Korea, Spain, Sweden, Switzerland, Taiwan, Thailand, Turkey, United Arab Emirates, USA, Vietnam. Detailed addresses and further locations

- www.sick.com

SICK AG | Waldkirch | Germany | www.sick.com