5/16" (8 mm)
"T" Wipe (Dual Durometer) This T-Wipe was designed to be attached to a vertical or horizontal edge. Its leg may be trimmed in the field to fine tune the installation. To attach, use Crystal Clear Two-way Tape for a positive, long lasting bond (See page 85). 98" (2.49 m) stock length.
1/2" (12 mm)
GLASS OR WALL
GLASS DOOR
PRODUCT CODE
GLASS THICKNESS
TW
N/A
GLASS DOOR CLEAR TAPE
CLEAR TAPE
CURB
Double Fin Seal (Dual Durometer) 5/16" (8 mm)
This unequal leg Double Fin Seal was designed to be attached to a vertical or horizontal edge. The legs may be trimmed in the field to fine tune the installation. To attach, use Crystal Clear Two-way Tape for a positive, long lasting bond (See page 85). 98" (2.49 m) stock length.
1/4" (6 mm)
5/16" (8 mm)
GLASS OR WALL GLASS DOOR GLASS DOOR
PRODUCT CODE
GLASS THICKNESS
DFS
N/A
CLEAR TAPE CLEAR TAPE CURB
"V" Seal (Dual Durometer)
SOFT 1/4" (6 mm)
Use this clear "V" Seal between the door and the wall on the hinge side or on the strike side of outswing doors only. Attach the rigid side to glass or wall. The soft leg provides a cushioned, quiet closure. To attach, use Crystal Clear Two-way Tape for a positive, long lasting bond (See page 85). 98" (2.49 m) stock length.
5/16" (8 mm) RIGID GLASS OR WALL
CLEAR TAPE
PRODUCT CODE
GLASS THICKNESS
VS
N/A
OPEN
HINGE PIN
GLASS DOOR CLEAR TAPE
GLASS OR WALL
ushorizon.com • Toll Free Phone (877) 728-3874 • Toll Free Fax (888) 440-9567
71