4x4catalogue.pdf

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4x4 Catalogue Accessories ii | viii | x | xii | xiv | xvi | xvii | xviii | xviii | xix | xxi | xxi | xxii | xxii | xxiii | xxv | xxvi |

contents Other Items

Bull Bars Roof Racks Side Steps & Side Rails Snorkels Rear Drawers Canopies Dual BaƩery Trays Air Compressors Camping/Touring Equipment Driving Lights Dual BaƩery Kits First Aid Kits Fridge / Freezer LiŌing Jacks Recovery Gear Tyre Accessories Winches

Information xxix | xxx | xxxi | 149 |

contents table of

Coil Springs Leaf Springs General Terms & CondiƟons

xxvii| PromoƟonal Gear 148 | Coil Spacers

Vehicle Suspension 1 10 11 12 14 25 26 37 41 49 52 55 65 90 95 103 146 147

| | | | | | | | | | | | | | | | | |

Ford GM / Chevrolet General Motors Great Wall Holden - GM - Isuzu Hyundai Jeep Kia Landrover Mazda Mercedes Mitsubishi Nissan Ssangyong Suzuki Toyota UAZ Volkswagen

Dobinsons Spring & SuspensionTM are committed to bringing you the very latest at all times. While our printed editions come out on a regular basis, our online editions are constantly updated. It is our recommendation that you verify your selection with these online editions before ordering. You can view them at any time on our website of using these QR Codes. Visit our Website

4x4 Catalogue

4x4 Accessories Catalogue

While we take all care in the preparation of this catalogue, we also realise errors can occur. Please confirm that the parts you are ordering are correct for your requirements. No responsibility is implied or taken. The names and reference numbers of manufacturers and suppliers, other than Dobinsons Spring & SuspensionTM, used in this catalogue are shown only to assist our customers in identifying replacement parts. Under no circumstances does Dobinsons Spring & SuspensionTM imply that the parts are of these OE manufacturers. Pictures used in this Catalogue are for illustration purposes only

ABN: 22 751 879 972

Dobinsons Spring & SuspensionTM | www.dobinsonsprings.com

JAN14

i

NOTE

• • •

ACCESSORIES

ACCESSORIES

Classic Black and Classic Black Deluxe Bull Bars are supplied with a black finish. Stainless Loop Deluxe Bull bars are supplied with a black finish and stainless steel loops. Colour matching can be performed by your local spray painter.

3500 Series

Bull Bars

Classic Black VEHICLE MAKE & MODEL

PART NUMBER

FITTING (HOURS)

FORD Ranger PJ / PK Ranger PX

Suits 4x4 & 4x2

Suits 4x4 & 4x2

2007 - 09/2011

BU19-3524

3

10/2011 on

BU19-3525

3

03/2011 on

BU20-3534

3

GREAT WALL Great Wall V200/V240

(Face-lifted models only) T/Diesel models non-winch compatible

HOLDEN / ISUZU / CHEV Rodeo RA

Suits 4x4 & 4x2

Rodeo RA7

Excludes under protection kit

Suits 4x4 & 4x2

2002 - 2006

BU21-3522

3

2007 - 2011

BU21-3513

3

D-Max

Suits 4x4 & 4x2

2007 - Mid Year 2012

BU21-3513

3

D-Max

Suits 4x4 & 4x2

Mid Year 2012 on

BU21-3529

3

Colorado

Suits 4x4 & 4x2

Colorado RG / Colorado 7 / Trailblazer SUV Isuzu MU-X

Suits 4x4 & 4x2

Suits 4x4 & 4x2

2008 - Mid Year 2012

BU21-3514

3

Mid Year 2012 on

BU21-3532

3

2012 on

BU21-3538

3

2007 - 09-2011

BU39-3501

3

10/2011 on

BU39-3530

3.5

MAZDA BT50

Suits 4x4 & 4x2

BT50 B32P

Suits 4x4 & 4x2

MITSUBISHI 2009 - Mid Year 2013

BU43-3502

3.5

Triton ML

Suits 4x4 & 4x2

10/2006 - 08/2009

BU43-3502

3.5

Triton MN

Suits 4x4 & 4x2

09/2009 on

BU43-3503

3.5

Challenger (Pajero Sport USA, Thailand)

ii

JAN14 Rev.1

Excludes Face-Lifted models

Suits Flared Models

Requires a Bumper Cut

Fitting times are an estimate only. * Vehicles not fitted with OE fog lights will require an extra 0.75 hrs

NOTE * Due to the additional weight when fitting a Bull Bar and/or Winch, the vehicles ride height will be lowered. Dobinsons Spring & SuspensionTM suggest replacing the springs with a matched pair of springs to suit the requirement.

ACCESSORIES

ACCESSORIES

3500 Series

Bull Bars VEHICLE MAKE & MODEL

PART NUMBER

FITTING (HOURS)

NISSAN Navara D22 / NP300

2002 on

BU45-3517

2

09/2005 on

BU45-3504

3.5

09/2005 - 04/2010

BU45-3504

3.5

05/2010 on

BU45-3526

3.5

Excludes any V6 T/D variants

09/2005 - 04/2010

BU45-3504

3.5

Excludes any V6 T/D variants

05/2010 - 09/2013

BU45-3526

3.5

1998 - 2004

BU45-3519

2

09/2004 on

BU45-3505

2

1998 - 2006

BU45-3519

2

2006 on

BU45-3505

2

Bundera LJ/RJ 70/73, Landcruiser FJ/BJ 70/71/73/74 SWB & MWB

1985 - 1990

BU59-3515

2

Fortuner

2005 on

BU59-3516

2

1997 - 2005

BU59-3521

3

Suits 4x4 & 4x2

Navara D40

Ribbed Bumper Suits 4x4 & 4x2 (Thailand Built)

Navara D40

Ribbed Bumper Suits 4x4 & 4x2 (Spain Built)

Navara D40

Excludes RX Single Cab & any V6 T/D Excludes RX Single Cab & any V6 T/D

Smooth Bumper Suits 4x4 & 4x2 Diesel (Spain Built)

Pathfinder R51 Pathfinder R51

Patrol Y61 GU Wagon Patrol Y61 GU Wagon Patrol Y61 GU Ute Patrol Y61 GU Ute

(Series 1,2 & 3)

Excludes RX Single Cab & any V6 T/D

Centre Under Protection Only

(Series 4)

Centre Under Protection Only

(Series 1,2 & 3)

Coil Spring Models Only. Centre Under Protection Only

(Series 4 on)

Coil Spring Models Only. Centre Under Protection Only

TOYOTA

Hilux N16, N17

Suits 4x4

Hilux Vigo N25, N26

Excludes under protection kit

04/2005 - 08/2011

BU59-3510

3

Suits 4x4

09/2011 on

BU59-3527

3

Landcruiser HZJ/PZJ 70/73 MWB

1990 - 1999

BU59-3515

2

Landcruiser FZJ/HZJ 71/74 SWB & MWB

1999 - 2004

BU59-3515

2

Landcruiser FZJ/PZJ/HZJ 77 Wagon

1993 - 1999

BU59-3515

2

Landcruiser 75,78,79 Series

1984 - 2007

BU59-3515

2

Landcruiser (V8) 76,78,79 Series

2007 on

BU59-3506

2

Landcruiser LJ/RJ/KZJ 70/72/73/77/78/79

1987 - 1996

BU59-3515

2

Hilux Vigo

Suits 4x4

Landcruiser 80 Series

BU59-3518

2

Landcruiser 105 Series

(Solid Front Axle)

04/1998 on

BU59-3507

2

Landcruiser 100 Series

(Independant Front Suspension)

1998 on

BU59-3508

2

Landcruiser 200 Series

(Initial Release Only)

2008 - 02/2012

BU59-3509

3

Landcruiser 200 Series

(Facelift model)

2012 on

BU59-3533

3

12/2002 - 09/2009

BU59-3511

3

10/2009 - 09/2013

BU59-3512

3

2011 on

BU63-3523

3

Prado 120 Series Prado 150 Series

(Initial Release Only, For Facelift Models Refer to Classic Black Deluxe)

VOLKSWAGEN Amarok

Suits Flared Models

Requires a Bumper Cut

Fitting times are an estimate only. * Vehicles not fitted with OE fog lights will require an extra 0.75 hrs

JAN14 Rev.3

iii

iv

JAN14

NOTE * Due to the additional weight when fitting a Bull Bar and/or Winch, the vehicles ride height will be lowered. Dobinsons Spring & SuspensionTM suggest replacing the springs with a matched pair of springs to suit the requirement.

ACCESSORIES

ACCESSORIES

Bull Bars

Classic Black Deluxe

VEHICLE MAKE & MODEL

PART NUMBER

FITTING (HOURS)

FORD Ranger PX

Suits 4x4 & 4x2

10/2011 on

BU19-3686

3*

Mid Year 2012 on

BU21-3685

3*

Mid Year 2012 on

BU21-3687

3*

2012 on

BU21-3699

3*

10/2011 on

BU39-3694

3.5*

09/2009 on

BU43-3693

3.5*

05/2010 on

BU45-3692

3.5*

HOLDEN / ISUZU / CHEV D-Max

Suits 4x4 & 4x2

Colorado RG / Colorado 7 / Trailblazer SUV Isuzu MU-X

Suits 4x4 & 4x2

Suits 4x4 & 4x2

MAZDA BT50 B32P

Suits 4x4 & 4x2

MITSUBISHI Triton MN

Suits 4x4 & 4x2

NISSAN Navara D40

Smooth Bumper Suits 4x4 & 4x2 Diesel (Spain Built)

Pathfinder R51

Excludes RX Single Cab & any V6 T/D

05/2010 - 09/2013

BU45-3692

3.5*

1998 - 2004

BU45-3690

2*

Centre Under Protection Only

09/2004 on

BU45-3691

2*

Coil Spring Models Only. Centre Under Protection Only

1998 - 2006

BU45-3690

2*

2006 on

BU45-3691

2*

09/2011 on

BU59-3695

3*

2008 on

BU59-3696

3*

10/2009 on

BU59-3697

3*

2011 on

BU63-3680

4*

Excludes any V6 T/D variants

Patrol Y61 GU Wagon

(Series 1,2 & 3)

Patrol Y61 GU Wagon

(Series 4)

Patrol Y61 GU Ute

(Series 1,2 & 3)

Patrol Y61 GU Ute

(Series 4 on)

Centre Under Protection Only

Coil Spring Models Only. Centre Under Protection Only

TOYOTA Hilux Vigo

Suits 4x4

Landcruiser 200 Series Prado 150 Series

(Initial Release & Facelift Models)

(Initial Release & Facelift Models)

VOLKSWAGEN Amarok

Suits Flared Models

Requires a Bumper Cut

Fitting times are an estimate only. * Vehicles not fitted with OE fog lights will require an extra 0.75 hrs

JAN14

Rev.2

v

NOTE

• • •

ACCESSORIES

ACCESSORIES

Classic Black and Classic Black Deluxe Bull Bars are supplied with a black finish. Stainless Loop Deluxe Bull bars are supplied with a black finish and stainless steel loops. Colour matching can be performed by your local spray painter.

3600 Series

Bull Bars

VEHICLE MAKE & MODEL

PART NUMBER

FITTING (HOURS)

FORD Ranger PJ / PK Ranger PX

Suits 4x4 & 4x2

Suits 4x4 & 4x2

2007 - 09/2011

BU19-3676

3*

10/2011 on

BU19-3677

3*

03/2011 on

BU20-3672

3*

GREAT WALL Great Wall V200/V240

(Face-lifted models only) T/Diesel models non-winch compatible

HOLDEN / ISUZU / CHEV Rodeo RA7

2007 - 2011

BU21-3663

3*

D-Max

Suits 4x4 & 4x2

2007 - Mid Year 2012

BU21-3663

3*

D-Max

Suits 4x4 & 4x2

Mid Year 2012 on

BU21-3681

3*

2008 - Mid Year 2012

BU21-3664

3*

Colorado

Suits 4x4 & 4x2

Suits 4x4 & 4x2

Colorado RG / Colorado 7 / Trailblazer SUV Isuzu MU-X

Suits 4x4 & 4x2

Suits 4x4 & 4x2

Mid Year 2012 on

BU21-3684

3*

2012 on

BU21-3698

3*

2007 on

BU29-3670

2*

2007 - 09-2011

BU39-3651

3*

10/2011 on

BU39-3682

3.5*

2009 - Mid Year 2013

BU43-3652

3.5*

JEEP Wrangler JK

(Single Black Loop Style) Excludes under protection kit

MAZDA BT50

Suits 4x4 & 4x2

BT50 B32P

Suits 4x4 & 4x2

MITSUBISHI Challenger (Pajero Sport USA, Thailand)

Excludes Face-Lifted models

Triton ML

Suits 4x4 & 4x2

10/2006 - 08/2009

BU43-3652

3.5*

Triton MN

Suits 4x4 & 4x2

09/2009 on

BU43-3653

3.5*

2002 on

BU45-3667

2*

09/2005 on

BU45-3654

3.5*

09/2005 - 04/2010

BU45-3654

3.5*

NISSAN Navara D22 / NP300

vi

Suits 4x4 & 4x2

Navara D40

Ribbed Bumper Suits 4x4 & 4x2 (Thailand Built)

Navara D40

Ribbed Bumper Suits 4x4 & 4x2 (Spain Built)

Navara D40

Smooth Bumper Suits 4x4 & 4x2 Diesel (Spain Built)

Excludes RX Single Cab & any V6 T/D Excludes RX Single Cab & any V6 T/D

05/2010 on

BU45-3678

3.5*

Pathfinder R51

Excludes any V6 T/D variants

09/2005 - 04/2010

BU45-3654

3.5*

Pathfinder R51

Excludes any V6 T/D variants

05/2010 - 09/2013

BU45-3678

3.5*

JAN14 Rev.3

Suits Flared Models

Excludes RX Single Cab & any V6 T/D

Requires a Bumper Cut

Fitting times are an estimate only. * Vehicles not fitted with OE fog lights will require an extra 0.75 hrs

NOTE * Due to the additional weight when fitting a Bull Bar and/or Winch, the vehicles ride height will be lowered. Dobinsons Spring & SuspensionTM suggest replacing the springs with a matched pair of springs to suit the requirement.

ACCESSORIES

ACCESSORIES

3600 Series

Bull Bars

VEHICLE MAKE & MODEL

PART NUMBER

FITTING (HOURS)

NISSAN Patrol Y61 GU Wagon

(Series 1,2 & 3)

1998 - 2004

BU45-3669

2*

Patrol Y61 GU Wagon

(Series 4)

09/2004 on

BU45-3655

2*

1998 - 2006

BU45-3669

2*

2006 on

BU45-3655

2*

2010 on

BU45-3673

2.5*

2005 on

BU59-3666

3*

04/2005 - 08/2011

BU59-3660

3*

09/2011 on

BU59-3679

3*

Patrol Y61 GU Ute

(Series 1,2 & 3)

Patrol Y61 GU Ute

(Series 4 on)

Patrol Y62

Coil Spring Models Only Coil Spring Models Only

Excludes TI-L Model

TOYOTA Fortuner Hilux Vigo N25, N26 Hilux Vigo

Suits 4x4

Suits 4x4

Landcruiser (V8) 76,78,79 Series

2007 on

Landcruiser 80 Series

BU59-3656

2*

BU59-3668

2*

Landcruiser 105 Series

(Solid Front Axle)

04/1998 on

BU59-3657

2*

Landcruiser 100 Series

(Independant Front Suspension)

1998 on

BU59-3658

2*

Landcruiser 200 Series

(Initial Release Only)

2008 - 02/2012

BU59-3659

3*

Landcruiser 200 Series

(Facelift model)

2012 on

BU59-3688

3*

Prado 90 Series

1996 - 11/2002

BU59-3674

2.5*

Prado 120 Series

12/2002 - 09/2009

BU59-3661

3*

10/2009 - 09/2013

BU59-3662

3*

2011 on

BU63-3675

4*

Prado 150 Series

(Initial Release Only, For Facelift Models Refer to Classic Black Deluxe)

VOLKSWAGEN Amarok BULLBAR REPLACEMENT PARTS LED Indicator / Park Light (Single Unit)

BU80-003

Fog Light (Single Unit)

BU80-004

Fog Light Surround

BU80-006 L/R

(Specify L for Left or R for Right after the part number)

Poly Bumber Over Rider

(Specify L for Left or R for Right after the part number) Suits: Classic black & Classic Black Deluxe

BU80-007 L/R

Poly Bumber Over Rider

(Specify L for Left or R for Right after the part number) Suits: Stainless Loop Deluxe

BU80-008 L/R

BULLBAR BLANKING KIT

BU80-005K

Plug kit to cover holes when removing loops, require 1 of each p/n per bar KIT CONTAINS:

1 x pair Poly Bumper Plug (p/n: BU80-002), 1 x pair Outer Wing Bolt Hole Plug (p/n: BU80-001)

Suits Flared Models

Requires a Bumper Cut

Fitting times are an estimate only. * Vehicles not fitted with OE fog lights will require an extra 0.75 hrs

JAN14

Rev.2

vii

ACCESSORIES

ACCESSORIES

Features

Bull Bars FEATURES » » » » »

Airbag & Winch Compatible Dual Aerial Mounts Dual Hi-Lift Jacking Points Driving Light Mounts, Park & Indicator Lights Polyurethane Bumper Protectors

» » »

Stainless Steel Grade 304 / Triple Loop Fog Lights 100mm HB4 OEM High Quality Standard

» » »

Classic Black High Quality Steel Components Unique Mounting System: Winch mounts separate to Bar. Spreads Impact & Winching Loads evenly over Chassis Split Upper & Lower Design to Allow Maximum Airflow to the Radiator

Most Dobinsons Bull Bars are Equipped with Centre and Side Protection Plates for the Underside of the Bull Bar.

Stainless Loop Deluxe ture re to o A Crucial Feature he help Protect the Radiator and Other Vital Engine Components when Off-road Driving.

Roof Racks DESCRIPTION

PART NUMBER

STEEL ROOF RACK » » » » »

Cargo Net Hook Spare Wheel Mounting Point Strong Brackets Fitting Kit Included Powder Coat Finish

Fitting Time: approx 1.0hr (all roofracks)

1500mm x 1250mm Bolt on Style Bracket to Suit Canopies and Trailers To be mounted to canopy roof rails may require some fabrication. Fibreglass canopies require internal reinforcement bars.

RR80-4100

1850mm x 1250mm Gutter Style Mounting Bracket Suits: » MQ / MK Nissan Patrol » Y60 GQ Nissan Patrol » Y61 GU Nissan Patrol » 60 Series Toyota Landcruiser » 80 Series Toyota Landcruiser » 70 Series Toyota Landcruiser (1985 on - does not include FRP top) » 90 Series Toyota Prado » 120 Series Toyota Prado (Additional Fitting Kit P/N RR80-4113 Required) » 150 Series Toyota Prado (Additional Fitting Kit P/N RR80-4114 Required) » 100 - 105 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4105 Required) » 200 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4106 Required) viii

JAN14

RR80-4101

ACCESSORIES

ACCESSORIES

Roof Racks DESCRIPTION

PART NUMBER

2200mm x 1250mm Gutter Style Mounting Bracket Suits: » MQ / MK Nissan Patrol » Y60 GQ Nissan Patrol » Y61 GU Nissan Patrol » 60 Series Toyota Landcruiser » 80 Series Toyota Landcruiser » 70 Series Toyota Landcruiser (1985 on - does not include FRP top) » 90 Series Toyota Prado » 100 - 105 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4125 Required)

RR80-4102

» 200 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4124 Required ROOF TOP TENT RACK » » » »

Spare Wheel Mounting Point Strong Brackets Fitting Kit Included Powder Coat Finish 1500mm x 1250mm Bolt on Style Bracket to Suit Canopies and Trailers To be mounted to canopy roof rails may require some fabrication. Fibreglass canopies require internal reinforcement bars.

RR80-4103

1850mm x 1250mm Gutter Style Mounting Bracket Suits: » MQ / MK Nissan Patrol » Y60 GQ Nissan Patrol » Y61 GU Nissan Patrol » 60 Series Toyota Landcruiser » 80 Series Toyota Landcruiser » 70 Series Toyota Landcruiser (1985 on - does not include FRP top) » 90 Series Toyota Prado » 120 Series Toyota Prado (Additional Fitting Kit P/N RR80-4113 Required) » 150 Series Toyota Prado (Additional Fitting Kit P/N RR80-4114 Required) » 100 - 105 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4105 Required) » 200 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4106 Required)

RR80-4104

2200mm x 1250mm Gutter Style Mounting Bracket Suits: » MQ / MK Nissan Patrol » Y60 GQ Nissan Patrol » Y61 GU Nissan Patrol » 60 Series Toyota Landcruiser » 80 Series Toyota Landcruiser » 70 Series Toyota Landcruiser (1985 on - does not include FRP top) » 90 Series Toyota Prado » 100 - 105 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4125 Required) » 200 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4124 Required)

RR80-4115

JAN14

ix

ACCESSORIES

ACCESSORIES

Side Steps & Side Rails (Sold as Pair)

Features

FEATURES » » » » » » »

x

Durable powder coat finish ADR and airbag compatible Non-slip checkerplate tread steps 2mm thick 50mm heavy duty steel tube construction Twin inner and outer tube design for maximum sill protection Frontal swivel section for airbag compliance with airbag compliant bullbars Can also be fitted to most other brands of bullbars (Outer bullbar loop upright must be close to vertical)

JAN14

ACCESSORIES

ACCESSORIES

Side Steps & Side Rails (Sold as Pair) PART NUMBER STEPS ONLY

PART NUMBER STEPS & RAILS

2007 - 09/2011

SS19-101

SR19-150

10/2011 on

SS19-102

SR19-151

2007 - 2011

SS21-104

SR21-153

VEHICLE MAKE & MODEL

FITTING (HOURS)

FORD Ranger PJ / PK Ranger PX

Dual Cab

Dual Cab

Suits 4x4 & 4x2

Suits 4x4 & 4x2

SS-1 S+R-2 SS-1 S+R-2

HOLDEN / ISUZU / CHEV Rodeo RA7 Dual Cab

Suits 4x4 & 4x2

D-Max

Dual Cab Suits 4x4 & 4x2

2007 - Mid Year 2012

SS21-104

SR21-153

D-Max

Dual Cab Suits 4x4 & 4x2

Mid Year 2012 on

SS21-105

SR21-170

2008 - Mid Year 2012

SS21-105

SR21-154

2007 - 09-2011

SS19-101

SR19-150

10/2011 on

SS19-102

SR19-151

Colorado

Dual Cab

Suits 4x4 & 4x2

SS-1 S+R-2 SS-1 S+R-2 SS-1 S+R-2 SS-1 S+R-2

MAZDA BT50

Dual Cab Suits 4x4 & 4x2

BT50 B32P

Dual Cab Suits 4x4 & 4x2

SS-1 S+R-2 SS-1 S+R-2

MITSUBISHI Triton ML

Dual Cab Suits 4x4 & 4x2

10/2006 - 08/2009

SS43-106

SR43-155

Triton MN

Dual Cab

09/2009 on

SS43-106

SR43-155

SS-1 S+R-2 SS-1 S+R-2

2002 on

SS45-107

SR45-156

SS-1 S+R-2

Navara D40 Dual Cab, Ribbed Bumper Suits 4x4 & 4x2 (Thailand Built)

09/2005 on

SS45-109

SR45-158

SS-1 S+R-2

Navara D40

Dual Cab, Ribbed Bumper Suits 4x4 & 4x2 (Spain Built)

09/2005 - 04/2010

SS45-109

SR45-158

SS-1 S+R-2

Navara D40

Dual Cab, Smooth Bumper Suits 4x4 & 4x2 Diesel (Spain

05/2010 on

SS45-108

SR45-157

SS-1 S+R-2

Suits 4x4 & 4x2

NISSAN Navara D22 / NP300 Dual Cab

Built)

Suits 4x4 & 4x2

Patrol Y61 LWB GU Wagon

(Series 1,2,3)

1998 - 2004

SS45-110

SR45-159

SS-1 S+R-2

Patrol Y61 LWB GU Wagon

(Series 4)

09/2004 on

SS45-111

SR45-160

SS-1 S+R-2

04/2005 on

SS59-117

SR59-166

SS59-113

SR59-162

10/2009 - 09/2013

SS59-118

SR59-168

SS-1 S+R-2 SS-1 S+R-2 SS-1 S+R-2

2011 on

SS63-119

SR63-169

SS-1 S+R-2

TOYOTA Hilux Vigo

Dual Cab

Suits 4x4

Landcruiser 80 Series Prado 150 Series

VOLKSWAGEN Amarok

Dual Cab

Fitting times are an estimate only. Fitting times may vary. JAN14 Rev.1

xi

ACCESSORIES

Increased Airflow Maximises Engine Performance and Saves Fuel

ACCESSORIES

Snorkels

Designed to Increase Water Separation

Listings for Australian Delivered Vehicles

VEHICLE MAKE & MODEL

Install a Snorkel and Get your Air Intake Above the Ground and Out of the Water

FUEL

ENGINE

MOUNT PART NUMBER

FITTING (HOURS)

FORD Ranger PJ/PK 06 - 11 Ranger PX 10/11 on Ranger PX 10/11 on

(Excludes models with flares) (Excludes models with flares)

Diesel

3.0L Tdi

Left

SN19-3316

3

Diesel Diesel

3.2L Tdi 2.2L Tdi

Right Right

SN19-3384 SN19-3384

3 3

Diesel Diesel Diesel Diesel Diesel Diesel

3.0L 3.0L 3.0L 3.0L 2.8L 2.8L

Right Right Right Right Right Right

SN21-3383 SN21-3456 SN21-3383 SN21-3456 SN21-3457 SN21-3457

2 2 2 2 3 3

HOLDEN / ISUZU / CHEV D-Max (Dual & Extra Cabs ONLY) 07/08 - 05/12 D-Max 06/12 on Rodeo RX, LX & LT (NOT Single Cab) 01/07 - 08 MU-X 12 on Colorado RG Mid Year 12 on Colorado 7/Trailblazer Mid Year 12 on

Tdi Tdi Tdi Tdi Tdi Tdi

MAZDA BT-50 06 - 11

Diesel

3.0L Tdi

Left

SN19-3316

3

BT-50 B32P 10/11 on

Diesel

3.2L Tdi

Right

SN39-3459

3

Diesel Diesel Diesel

3.2L Tdi 2.5L Tdi 4D56 2.5L

Right Right Right

SN43-3329 SN43-3329 SN43-3451

3 3 2.5

Diesel Diesel Diesel Diesel Petrol Diesel Diesel Petrol Diesel Petrol Diesel Petrol Diesel Diesel Diesel

3.0L Tdi 2.5L Tdi 2.5L Tdi 2.5L Tdi 4.2L, 3.0L 4.2L 2.8L Td, 4.2L Td 4.5L 4.2L Td, 3.0L Td 4.8L 4.2L Tdi, 3.0L Tdi 4.8L 3.0L Td 4.2L 4.2L Td

Left Left Left Left Left Left Left Left Left Left Left Left Left Left Left

SN45-3382 SN45-3382 SN45-3397 SN45-3397 SN45-3338 SN45-3338 SN45-3348 SN45-3348 SN45-3343 SN45-3348 SN45-3401 SN45-3402 SN45-3401 SN45-3348 SN45-3343

2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 3

MITSUBISHI Triton ML 10/06 - 08/09 Triton MN 09/09 on Delica L400 94 - 06

NISSAN Navara D22 10/01 - 12/06 Navara D22 (Single Battery Only) 01/07 on Navara D40 Excludes Single Cab & 2010 on Spain-built (VSK Vin) ST/ST-X R51 Pathfinder 04/05 - 2009 Patrol GQ / Ford Maverick 01/88 - 10/97 Patrol GQ / Ford Maverick (Vertical Pre Cleaner) 01/88 - 10/97 Patrol GU (Wagon Series 1) 11/97 - 03/00 Patrol GU (Wagon Series 2 & 3) 04/00 - 08/04 Patrol GU (Wagon Series 4) 09/04 on Patrol GU (Series 4 - Coil Cab Chassis) 07 on Patrol GU (Ute Series 1,2 & 3) 11/97 to 11/06

Dobinsons Spring & SuspensionTM Snorkels - CompeƟƟvely Priced Fitting times are an estimate only

xii

JAN14 Rev.2

Increased Airflow Maximises Engine Performance and Saves Fuel

Snorkels

Listings for Australian Delivered Vehicles

VEHICLE MAKE & MODEL

Install a Snorkel and Get your Air Intake Above the Ground and Out of the Water

FUEL

ENGINE

MOUNT PART NUMBER

Diesel Petrol Diesel Petrol Diesel Petrol Diesel Diesel Petrol Petrol Diesel Diesel Petrol Petrol Diesel Petrol Petrol Diesel

4.0L 4.0L 4.2L 1HZ 4.0L, 4.5L 4.2L, 4.2L Td 4.5L, 4.7L V8 4.2L Td, 4.2L Tdi 4.5L TTD V8 4.7L V8 4.5L, 4.7L V8 4.2L Td, 4.2L Tdi 3.0L Tdi 4.0L V6 3.4L V6 3.0L 4.0L V6 4.0L V6 3.0L

Right Right Right Right Right Right Right Right Right Right Right Right Right Right Right Right Right Right

SN59-3374 SN59-3374 SN59-3375 SN59-3361 SN59-3361 SN59-3369 SN59-3369 SN59-3356 SN59-3356 SN59-3369 SN59-3369 SN59-3367 SN59-3368 SN59-3357 SN59-3355 SN59-3445 SN59-3446 SN59-3446

Diesel

2.0L Tdi I4

Right

SN63-3455

FITTING (HOURS)

ACCESSORIES

ACCESSORIES

Designed to Increase Water Separation

TOYOTA Landcruiser 71,73,75,78,79 Series

(Narrow Front)

01/85 - 03/07

* Does not replace genuine Toyota snorkel

Landcruiser 80 Series 01/90 - 03/98 Landcruiser 100 Series 04/98 - 09/07 Landcruiser 200 Series 08 on Lexus LX470 04/98 - 09/07 Hilux 04/05 on Prado 90 Series 12/97 - 12/02 Prado 120 Series 12/02 to 09/09 Prado 150 Series 10/09 on

* * *

3 3 2.5 3 3 2 2 3 3 2 2 2 2 2 2.5 2 3 3

VOLKSWAGEN Amarok

(Suits Highline, Trendline, Ultimate fitted with flares only)

03/11 on

4

REPLACEMENT SNORKEL HEAD SN80-077

77mm 85mm

SN80-085

Dobinsons Spring & SuspensionTM Snorkels - CompeƟƟvely Priced Fitting times are an estimate only JAN14 Rev.2

xiii

ACCESSORIES

ACCESSORIES

Rear Drawers

Features

FEATURES » » » » » » » » » » »

xiv

1.6mm zinc plated robust steel construction 12mm heavy duty ply wood panels with marine carpet covering Single side inbuilt, heavy duty fridge slide 8 x heavy duty stainless steel tie down points Outer wing kits provide a factory fit Aluminium edging protection Supplied pre-assembled for simple fitment Heavy duty lockable latches 150kg draw capacity Heavy duty roller bearing system 195mm x 460mm x 935mm internal bin dimensions

JAN14

ACCESSORIES

ACCESSORIES

Rear Drawers PART NUMBER DRAWERS

PART NUMBER WING KIT

FITTING (HOURS)

1998 - 2004

RD80-1000

DW45-016K

2

09/2004 on

RD80-1000

DW45-016K

2

VEHICLE MAKE & MODEL

NISSAN Patrol Y61 LWB GU Wagon

(Series 1,2 & 3)

Patrol Y61 LWB GU Wagon

(Series 4)

TOYOTA Landcruiser 80 Series Landcruiser 105 Series

(Solid Front Axle)

Landcruiser 100 Series

(Independent Front Suspension)

RD80-1000

DW59-022K

2

04/1998 on

RD80-1000

DW59-024K

2

1998 on

RD80-1000

DW59-023K

2

Landcruiser 200 Series

2008 on

RD80-1000

DW59-025K

2

Prado 120 Series

(Without Rear Air-Conditioning)

12/2002 - 09/2009

RD80-1001

DW59-028K

2

Prado 150 Series

(Without Rear Air-Conditioning)

10/2009 on

RD80-1001

DW59-029K

2

Prado 150 Series

(With Rear Air-Conditioning)

10/2009 on

RD80-1001

DW59-030K

2

Fitting times are an estimate only. Fitting times may vary. JAN14 Rev.1

xv

ACCESSORIES

ACCESSORIES

Canopies PART NUMBER

VEHICLE MAKE & MODEL

SLIDE WINDOWS

PART NUMBER L/UP WINDOWS

FITTING (HOURS)

FORD Ranger PX

Dual Cab

Suits 4x4 & 4x2

10/2011 on

CY19-3100

CY19-3150

2.5*

2009 on

CY20-3101

CY20-3151

2.5*

2002 - 04/2012

CY21-3102

CY21-3152

2.5*

GREAT WALL V200/V240

Dual Cab

Suits 4x4 & 4x2

HOLDEN / ISUZU / CHEV Rodeo RA/RA7

Dual Cab

Suits 4x4 & 4x2

D-Max

Dual Cab Suits 4x4 & 4x2

2007 - Mid Year 2012

CY21-3102

CY21-3152

2.5*

D-Max

Dual Cab Suits 4x4 & 4x2

Mid Year 2012 on

CY21-3104

CY21-3154

2.5*

2008 - Mid Year 2012

CY21-3102

CY21-3152

2.5*

Mid Year 2012 on

CY21-3103

CY21-3153

2.5*

10/2011 on

CY39-3105

CY39-3155

2.5*

09/2009 on

CY43-3106

CY43-3156

2.5*

Navara D22 / NP300 Dual Cab (Thai Built Only) Suits 4x4 & 4x2

2009 on

CY45-3107

CY45-3157

2.5*

Navara D40

09/2005 on

CY45-3108

CY45-3158

2.5*

04/2005 on

CY59-3109

CY59-3159

2.5*

2011 on

CY63-3110

CY63-3160

2.5*

Colorado

Dual Cab

Colorado RG

Suits 4x4 & 4x2

Dual Cab

Suits 4x4 & 4x2

MAZDA BT50 B32P

Dual Cab Suits 4x4 & 4x2

MITSUBISHI Triton MN

Dual Cab

Suits 4x4 & 4x2

NISSAN

Dual Cab, Suits 4x4 & 4x2

TOYOTA Hilux Vigo

Dual Cab

Suits 4x4

VOLKSWAGEN Amarok

Dual Cab

FEATURES » » » » » » » » » » » xvi

Available with sliding or lift up side windows Pressed 0.8mm steel shell construction Factory colour-coded and baked paint finish Twin rotary door locks with remote central locking rear door Includes roof rails (durable epoxy coated) static load tested to 100kg Fully lined interor with automatic interior light Internal door safety release Tinted side windows Front sliding window Rear brake light Rear window demister JAN14

Fitting times are an estimate only. * Some vehicles may require additional fitting time for wiring.

Dual BaƩery Trays VEHICLE MAKE & MODEL

LOCATION

PART NUMBER

FITTING (HOURS)

ACCESSORIES

ACCESSORIES

FORD LHF Engine Bay

BT19-3200

0.5

Ranger PX*

XLT & Wildtrack Models With Factory Tub Liner (#See Note Below)

10/2011 on

Tub Mount

BT19-3201

0.5

Ranger PX*

XL & XLS Models Without Tub Liner (#See Note Below)

10/2011 on

Tub Mount

BT19-3202

0.5

Rodeo RA/RA7*

2002 on

Tub Mount

BT21-3203

0.5

D-Max*

2007 - Mid Year 2012

Tub Mount

BT21-3203

0.5

D-Max*

Mid Year 2012 on

Tub Mount

BT21-3203

0.5

Colorado*

2008 - Mid Year 2012

Tub Mount

BT21-3203

0.5

Colorado* RG

Mid Year 2012 on

Tub Mount

BT21-3203

0.5

2007 - 09-2011

LHF Engine Bay

BT19-3200

0.5

Tub Mount

BT39-3204

0.5

Ranger PJ / PK

Manual Models Only Without ECU on Left Hand Front Skirt

2007 - 09/2011

HOLDEN / ISUZU / CHEV

MAZDA BT50

Manual Models Only Without ECU on Left Hand Front Skirt

BT50 B32P*

Models Without Tub Liner

10/2011 on

MITSUBISHI Triton ML

10/2006 - 08/2009

LHR Engine Bay

BT43-3205

1.25

Triton MN

09/2009 on

LHR Engine Bay

BT43-3205

1.25

09/2005 on

Tub Mount

BT45-3206

0.5

1998 - 2004

LHC Engine Bay

BT45-3207

0.75

09/2004 on

LHC Engine Bay

BT45-3207

0.75

04/2005 on

LHR Engine Bay

BT59-3208

0.5

NISSAN Navara D40*

Excludes RX Single Cab & any V6 T/D

Patrol Y61 GU

(Series 1,2 & 3) 4.2L T/D & 3.0L T/D Only

Patrol Y61 GU

(Series 4) 4.2L T/D & 3.0L T/D Only

TOYOTA Hilux Vigo Landcruiser (V8) 76,78,79 Series

2007 on

LHF Engine Bay

BT59-3211

0.75

Prado 120 Series

12/2002 - 09/2009

RHF Engine Bay

BT59-3209

0.5

10/2009 - 09/2013

RHF Engine Bay

BT59-3210

0.5

Tub Mount

BT63-3212

0.5

Under Tray

BT80-3213

0.5

Under Tray

BT80-3214

0.5

3.0L T/D Only

Prado 150 Series VOLKSWAGEN Amarok*

2011 on

MULTI-FIT (Under-Tray Style) Universal To Suit 120ah Battery (Up to 330mm Long) Requires 445mm x 175mm Mounting Area Under Tray & Hangs Down 320mm Requires 330mm x 320mm Mounting Area Under Tray & Hangs Down 250mm

Universal To Suit N70zz Battery

See Page xxi ‘Dual BaƩery Kits’ for Dual BaƩery Management Kit All trays are to suit 12” N70zz battery size unless noted otherwise. *Suits vehicles with style-side/well-back/tub. Vehicles with tray/drop-side tray use universal under-tray battery tray. JAN14 #Vehicle uses smart charge alternator. DC to DC charger must be used on this vehicle or Ford to perform a smart charge disconnect if using EA80-3830. Fitting times are an estimate only. Fitting times may vary.

xvii

ACCESSORIES

ACCESSORIES

Air Compressors DESCRIPTION

PART NUMBER

HEAVY DUTY 12V CE Approved » » » » » »

Relay and Overheating Protector Air Flow: 72 L/min - Maximum Pressure: 150 psi 40mm Cylinder 2.4m Power Cable with Battery Clips 5m PU Hose Inline Pressure Gauge

»

Complete with Fittings & Carry Bag

AC80-3808

Camping/Touring Equipment DESCRIPTION

PART NUMBER

DELUXE ROOF TOP TENT Complete with Fitting Tools & Instructions » » » » »

Covered Entrance 60mm Thick Mattress Ladder: Aluminium Retractable 2.0m (Approx) Fits to Roof Rack or Roof Bars Removable Elastic Inner Straps to Assist Packup

»

Heavy Duty Waterproof PVC Protector Cover

»

Internal LED Strip Lighting

» »

Pop Out Window Awnings with Flyscreen Dimensions: Open 273 x 140 x 130cm - Folded 120 x 140 x 32cm

» » »

Raised 420D Flysheet to Allow Airflow, Control Temperature and Minimise Condensation High Quality 600D Oxford PU Coated Waterproof, Breathable Material Colour: Beige

DELUXE ROOF TOP TENT WITH BACK AWNING / CHANGE ROOM

CE80-3902

CE80-3924

Fully Enclosed Room (Including Floor) with zip down windows and flyscreens LADDER EXTENSION FOR HIGH LIFT VEHICLES

CE80-3931

UNIVERSAL MOUNTING CHANNEL (SOLD SEPARATELY)

CE80-3936

Aluminium Mounting Extrusion / Channel (Standard Inclusion in all Roof Top Tents and Awnings) 1.4m long universal slide channel for roof rack and roof bar mounting of accessories

SENSU AWNING Styled after the Traditional Japanese Sensu Folding Fan » » » » xviii

Mounted Left Hand Side Opens 2400 Complete with Poles, Ropes and Pegs Covers Over 10m2 JAN14 Rev.1

CE80-3903

Maximise Your 4x4 Experience... Camping/Touring Equipment DESCRIPTION

PART NUMBER

ACCESSORIES

ACCESSORIES

ROLL OUT AWNING » » » »

Complete with Poles, Ropes and Pegs Made from 420D PU Oxford Polyester Quick Lock Aluminium Poles 600 GSM UV Stabilised PVC Cover 1.4m long x 2.0m out 2.0m long x 2.0m out 2.5m long x 2.0m out

CE80-3934 CE80-3937 CE80-3904

Driving Lights DESCRIPTION

PART NUMBER

HID DRIVING LIGHTS » » » » » »

55 Watt / 6,000K High Intensity Discharge Internal Ballast 8.5” Waterproof Lightweight Housing Impact Resistant Polycarbonate Lens Cover Bullbar Friendly Housing Design Sold as kit (contains: 2 x lights, 2 x clear lens covers and full wiring loom)

Replacement Clear Lens Covers

(also sold separately)

DL80-3755K Fitting Time: approx 1.75hrs Includes Wiring

DL80-3757

LED LIGHT BARS - Single Row » » » » » » »

10 - 30V DC 5 Watt / 6,000K Cree LED Bulbs IP67 Water and Dust Proofing Reversable and Adjustable Mounting Feet Rubber Insulated Anti-Vibration Mounts Polycarbonate Lens Cover Heat Dispursing Dicast Alloy Housing

Fitting Time: approx 0.5hrs Using Existing Wiring

10” 30 Watt (6 x 5 Watt bulbs) Led Light Bar Single Row - 2,700 lumens

DL80-3760

20” 60 Watt (12 x 5 Watt bulbs) Led Light Bar Single Row - 5,400 lumens

DL80-3761

30” 90 Watt (18 x 5 Watt bulbs) Led Light Bar Single Row - 8,100 lumens

DL80-3762

40” 120 Watt (24 x 5 Watt bulbs) Led Light Bar Single Row - 10,800 lumens

DL80-3763

JAN14 Rev.1

xix

ACCESSORIES

The 1st Choice for Recreational & Serious Off Roaders ACCESSORIES

Driving Lights DESCRIPTION

PART NUMBER

LED DRIVING LIGHTS 90 Watt 7” Round » » » » » » »

DL80-3764K

10 - 30V DC 90 Watt / 6,500K (18 x 5 Watt Cree LED Bulbs) 7,200 Lumens each IP68 Water and Dust Proofing PMMA Lens Protector 7” Alloy Bullbar Friendly Housing Design Sold as a Kit (Contains: 2 x Lights, 2 x Clear Lens covers)

Fitting Time: approx 0.5hrs Using Existing Wiring

16 Watt 3” Square » » » » » » »

10 - 30V DC 16 Watt / 6,500K (4 x 4 Watt Cree LED Bulbs) 1,440 Lumens each IP68 Water and Dust Proofing PMMA Lens Protector 3” Alloy Housing With Reversible Mount Sold as Each (Contains: 1 x Light, 1 x Clear Lens Cover)

DL80-3767 Fitting Time: approx 0.25hrs Using Existing Wiring

12 Watt 4” Round » » » » » »

10 - 30V DC 12 Watt / 6,500K (4 x 3 Watt Cree LED Bulbs) 1,000 Lumens each IP68 Water and Dust Proofing PMMA Lens Can be used to replace Fog Lights as Driving Lights

»

Sold as Each

DL80-3768 Fitting Time: approx 0.25hrs Using Existing Wiring

(May Require Some Bracket Fabrication, Not Suitable as Fog Lights) (contains: 1 x Light, 1 x Clear Lens Cover)

LIGHTING ACCESSORIES Wiring Harness for Light Bar

DL80-3766

(sold separately)

Fitting Time: approx 1.5hrs

Wiring Harness for LED Driving Lights - Suits 2 Lights

(sold separately)

DL80-3765 Fitting Time: approx 1.5hrs

2” Pipe Light Bar Mounting Kit » » » » »

Heavy Duty Anodised Mounts Suits 2” (51mm) Pipe Suits Classic Black & Classic Black Deluxe Top Loops Suits Stainless Loop Deluxe Outer Loops Kit Includes 2 Mounts

DL80-3770K (Excluding BU59-3533 & BU59-3656)

Fitting Time: approx 0.3hrs

3” Pipe Light Bar Mounting Kit » » » » xx

Heavy Duty Annodised Mounts Suits 3” (76mm) Pipe Suits Stainless Loop Deluxe Centre Loops Kit Includes 2 Mounts JAN14 Rev.2

DL80-3771K Fitting Time: approx 0.3hrs

Dual BaƩery Kits DESCRIPTION

PART NUMBER

ACCESSORIES

ACCESSORIES

DUAL BATTERY KIT » » » » » »

140 Amp 13.3 Volt Cut In 12.8 Volt Cut Out Automatic Voltage Sensitive Battery Isolation Ignition Protected Dual Display Voltage Monitor (Backlit LCD Screen)

» » »

Reversible Display Screen for Overhead & Footwell Mounting All Installation Hardware Included All Cables 5m in Length for Rear Mounted Batteries

EA80-3830 Fitting Time: approx 1.5hrs (tray fitting not included)

Displays Both Battery Readings Simultaneously

Does not suit Ford PX Ranger as vehicle is equipped with a Smart Charge alternator - Vehicle requires DC to DC charger for dual battery setup Or - Vehicle requires Ford dealer to perform Smart Charge disconnect (may affect vehicle performance & economy)

Dual Battery Voltage Monitor

EA80-3833

(also sold separately)

First Aid Kits DESCRIPTION

PART NUMBER

FIRST AID KIT CE & FDA Approved » » » » » » » » » » » » » » » »

Non-Woven Swab 4 pcs Adhesive Plasters 3 strips Butterfly Band Aid 4 pcs Large Size Band Aid 1 pc Wet Tissue (Soap) 3 pcs Wet Tissue (NaCL) 3 pcs Scissors 5 1/2” 1 pc Adhesive Tape 1 roll Tweezers 1 pc Emergency Blanket 1 pc Elastic Bandage 1 roll Safety Gloves 1 pair Triangular Bandage 1 pc Safety Pin 6 pcs Conforming Bandage 1 roll Plastic Box, PP(21cm x 14cm 7cm) 1 pc

our 4x4

A

ve in Y Must Ha

FA80-3902

JAN14 Rev.1

xxi

ACCESSORIES

Experience • Quality • Service ACCESSORIES

Fridge / Freezer DESCRIPTION

PART NUMBER

FRIDGE / FREEZER CE & SAA Approved » » » » » » » » »

Utilizes Highest Quality Danfoss Compressor - Maximum Cooling Efficiency with Minimal Power Drain Cooling Capacity of -15°C and can be used as a Fridge or Freezer Digital Control Panel with Eco Mode 12/24V DC, 240V AC Integrated Low Voltage Cut-off with Auto Restart Heavy Duty Handles & Built In Rubber Feet LED Internal Light with Auto Shut-off Removable Fridge Basket city High Quality Insulation to Minimize Exterior Sizing but Maximise Internal Capacity 40 Litre

Single Zone

FF80-3940

50 Litre

Single Zone

FF80-3950

60 Litre

Single Zone

FF80-3960

80 Litre

Dual Zone (25L/55L Split)

FF80-3980

FRIDGE / FREEZER PROTECTOR BAG Insulated Protective Bag 40 Litre

FF80-3941

50 Litre

FF80-3951

60 Litre

FF80-3961

80 Litre

FF80-3981

FRIDGE SLIDE Suits 30/40/50 Litre Fridges

Includes 4x Fridge Straps

4 x Fridge Straps

FF80-3944 FF80-3945K

LiŌing Jacks DESCRIPTION

PART NUMBER

EXHAUST JACK CE Approved » » » » » » » » xxii

High Quality PVC Lifting Capacity: 4,200Kg 6m High Temperature Exhaust Hose Triple Protection Layer for both Top & Bottom Double Layer Protection around Body Collapses Flat for Easy Storage Incorporated One Way Valve to Maintain Jack Pressure Includes 5 Heavy Duty Ground Spikes to Improve Stability JAN14

EJ80-3810

LiŌing Jacks DESCRIPTION

PART NUMBER

ACCESSORIES

ACCESSORIES

HIGH LIFT JACK CE Approved & TUV Approved under AS/NZS 2693:2003 » » » »

1070mm Lift Height Lifting Capacity: 1,050Kg Durable Carry Bag Can Also be used to Pull, Push, Lift and Winch

HL80-3806

Recovery Gear DESCRIPTION

PART NUMBER

RECOVERY KIT » » » » » » » » » »

9m 8,000Kg Snatch Strap with Sliding Protective Sleeve 3m 12,000Kg Tree Trunk Protector Heavy Duty Carry Bag Heavy Duty Leather Gloves Waterproof Work Mat (1.6m x 1.4m) Compact Tri-fold Shovel Heavy Duty 18,000lb Greasable Snatch Block 2 x 3.25 ton Bow Shackle 2 x 4.75 ton Bow Shackle Digital Tyre Gauge with Auto Shut-off (psi, bar, kpa & kg/cm3)

RK80-3801

SNATCH STRAP - 9m x 75mm » » »

22% Stretch Factor 8,000Kg Sliding Protective Sleeve

SS80-3802

IMPORTANT NOTICE: The minimum breaking strength of the strap should be between 2 and 3 times the vehicle’s gross vehicle mass (GVM).

SNATCH STRAP - 9m x 100mm » » »

22% Stretch Factor 11,000Kg Sliding Protective Sleeve

The strap must be suited to the GVM of the lighter of the 2 vehicles used in the recovery process.

SS80-3803

JAN14

xxiii

ACCESSORIES

ACCESSORIES

Recovery Gear DESCRIPTION

PART NUMBER

SNATCH BAG SS80-3805 » »

Heavy Duty Carry Bag Suits all Dobinsons Recovery Straps

SNATCH STRAP KIT » » » » »

Heavy Duty Carry Bag Heavy Duty Leather Gloves 3.25 ton Bow Shackle 4.75 ton Bow Shackle 9m x 75mm 8,000Kg Snatch Strap

SS80-3804

TREE TRUNK PROTECTOR » » »

SS80-3827

3m x 75mm 12,000Kg Sliding Protective Sleeve

SAND TRACKS For Recovery from Sand, Mud, Dirt & Snow » » » »

38 Piece Rubber Traction 1500mm x 300mm Cross Beams High Quality Stainless Steel Cable 1 Track Complete with Wrap Bag for Easy Storage

ST80-3812

Grips like bulldozer tracks

RECOVERY HITCH » » »

Tested to Australian Standard AS2741-2002 Made of High Strength Zinc Finished Steel Fits Most Towbars

BOW SHACKLE 4.75 Ton Heavy Duty

SNATCH BLOCK 18,000lb Greasable Heavy Duty

RK80-3807

RK80-3828

SB80-3825

ACCESSORIES BAG » » » xxiv

Approximately 550mm x 180mm x 300mm (25L) Heavy Duty Carry Bag Multiple Pockets, ‘Carry More’ Design JAN14

RK80-3829

Tyre Accessories DESCRIPTION

PART NUMBER

ACCESSORIES

ACCESSORIES

DELUXE TYRE REPAIR KIT Quick Repair - No need to remove the tyre » » » » » » » »

Digital Tyre Gauge Steel Insertion Needle Hardened Steel Reaming Tool 30 Self Vulcanising Tyre Seals Lubricant 2 Allen Keys Valve Core Tool Spare Valve and Valve Caps

TYRE REPAIR CORDS To Suit Deluxe Tyre Repair Kit

TR80-3809

TR80-3816

RAPID TYRE DEFLATOR Removes valve stem to allow tyre deflation up to eight times quicker than conventional methods » » » »

TR80-3837

Includes Carry Case Corrosion Resistant Brass Fittings Quick Release Coupling Allows Pressure to be Checked at Any Time During Deflation 0 - 60 psi Gauge with 1 psi Increments

JAN14 JAN1 4

xxv

ACCESSORIES

NOTE

ACCESSORIES

* Due to the additional weight when fitting a Bull Bar and/or Winch, the vehicles ride height will be lowered. Dobinsons Spring & SuspensionTM suggest replacing the springs with a matched pair of springs to suit the requirement.

Winches DESCRIPTION

PART NUMBER

HAND WINCH CE Approved & TUV Approved » » » »

HW80-3811

Aluminium Light Weight, Corrosion Resistant Winch Body 1,600Kg Capacity 20m High Strength Galvanised Cable Heavy Duty Carry Bag

ELECTRIC WINCH CE Approved

xxvi

»

12V Compatible

»

Fully Sealed Single Solenoid

»

Steel Cable & Synthetic Rope Options

»

Winch Housing Breather

approx 1hr

»

Heavy Duty Gloves

»

Hand Held Control & Wireless Remote

(fitting with bullbar installation)

»

Rotating Ring Gear Clutch

»

64 x 224mm Drum

»

Automatic Braking Action

»

3 Stage Planetary Gears

»

Full Face Contact Drum Seals, Motor & End Housing Gaskets to Provide Extreme Water Resistance

JAN14

Fitting Times:

approx 1.75hrs (fitting to existing bullbar)

Wireless Remote Not Covered Under Warranty

Celebrating 60 Est. 1953 years of Australian Manufacturing Winches DESCRIPTION

PART NUMBER

ACCESSORIES

ACCESSORIES

SYNTHETIC ROPE

» » » »

High Grade Dyneema SK75 Ultra Light to Reduce Front Axle Weight Includes Rope Protector Stronger than Steel Cable IMPORTANT NOTICE: 30m x 10mm 14,200lb (Requires EW80-3823) 30m x 11mm 18,000lb (Requires EW80-3823)

The synthetic rope must be used with the aluminium fairlead/hawse (EW80-3820) and the large body synthetic rope winch hook (EW803823). These parts are required for use with synthetic rope products.

EW80-3821

EW80-3822

DO NOT USE WITH A ROLLER FAIRLEAD.

ALUMINIUM FAIRLEAD Compatible with Most Bullbars » » »

Manufactured from Precision Formed Aluminium Required for use with Synthetic Rope Assists in Preventing Pinching, Kinks and Frays Normally Associated with Guiding Rope

Large Body Synthetic Rope Winch Hook »

EW80-3820

EW80-3823

Required for use with Synthetic Rope

Damper Blanket » » »

Manufactured from High Quality PVC Long Internal Velcro Straps to Reduce Slipping Specifically Designed to Absorb the Maximum Amount of Potential Energy in the Event the Rope / Strap Should Break

DB80-3813

JAN14 JAN1 AN14 4 Rev.1

xxvii

PROMO GEAR

SPRING & SUSPENSION

xxviii

PromoƟonal Gear CATALOGUES / BROCHURES

PART NUMBER

Dobinsons Dobinsons Dobinsons Dobinsons Dobinsons Dobinsons

PG00-2200 PG00-2201 PG00-2202 PG00-2204 PG00-2205 PG00-2206

4x4 Catalogue 4x4 Accessories Catalogue Coil Spring Catalogue Trifold Brochure - 4x4 Suspension Trifold Brochure - 4x4 Accessories Bullbar Brochure

BANNERS

PART NUMBER

Indoor Hanging Wall Banner 200cm wide x 130cm high Roll Up Banner

PG00-2210 PG00-2211

FLAGS

PART NUMBER

Dobinsons Teardrop Flag 2.2m (with cross brace) Dobinsons Teardrop Flag 4.7m (with spike base) Dobinsons Rectangle Flag 90 x 150cm

PG00-2220 PG00-2221 PG00-2222

STICKERS / POSTERS

PART NUMBER

Dobinsons 4x4 Poster Dobisport Performance Poster Dobinsons Oval Logo Sticker 70 x 20cm Dobinsons Oval Logo Sticker with Products Sold Here 100 x 35cm Dobinsons Oval Logo 4x4 Suspension & Accessories Sticker 80 x 27cm Dobinsons Oval Logo Sticker 27 x 7.5cm Dobinsons Oval Logo Sticker 14 x 4cm Dobinsons Oval Logo Sticker 10 x 3cm Dobinsons Oval Logo Grunge Sticker Dobinsons Oval Logo Hologram Sticker 14 x 4cm Dobinsons 4x4 Sticker 7 X 8cm Dobinsons Clear Windscreen Sticker 100 x 10cm Dobinsons Clear Windscreen Sticker 60 x 10cm Dobinsons Round Reflective Sticker 12cm Diameter

PG00-2230 PG00-2231 PG00-2232 PG00-2233 PG00-2234 PG00-2235 PG00-2236 PG00-2237 PG00-2238 PG00-2239 PG00-2240 PG00-2241 PG00-2242 PG00-2243

MISCELLANEOUS

PART NUMBER

Dobinsons Dobinsons Dobinsons Dobinsons Dobinsons Dobinsons Dobinsons

PG00-2260 PG00-2261 PG00-2262 PG00-2263 PG00-2264 PG00-2265 PG00-2266

JAN14

Carry / Show Bag Pen (style may vary) Ruler (style may vary) Acrylic Sign 4x4 Stubbie / Can Cooler 4x4 Accessories Hat Promotional DVD Video

QTY

1 1 1 1 1 1 QTY

1 1

QTY

1 1 1

QTY

1 1 1 1 1 1 1 1 1 1 1 1 1 1

QTY

1 1 1 1 1 1 1

Dobinsons Coil Springs

COIL SPRING INFO

Original Equipped Coil Springs are prone to sagging (especially the rear) and therefore cannot satisfactorily carry increased loads. Dobinsons Spring & SuspensionTM manufacture after market Coil Springs to restore the ride height with our improved Design Coils. In most cases, the coil is 10% - 30% stronger than the original OEM Spring. This gives better Load Carrying capacity for Heavy Loads and enhances Road Handling while also improving towing capacities.

STATE OF THE ART HEAT TREATMENT

DESIGN TECHNOLOGY

Heat treatment is unseen and is the most important process in the coil spring manufacturing process. Hardening and tempering is completed by a very accurate electronically controlled furnace to eliminate breakage.

Dobinsons Spring & SuspensionTM computers have a design that allows the spring to maximise what is expected of the spring: . Better Load Carrying . Better Handling . Height Requirements . Greater Towing Capacity.

FORMED ON PRECISION MANDRELS

POWDER COAT FINISH

Each coil is precisely placed by a programmable logic computer to achieve perfect pitch. This is very important in Variable and Progressive Rate Springs.

SHOT PEENED

The Powder Coat Finish is baked on to give a lasting protective coat to help eliminate rust.

Coils are shot peened to give longer life.

FULLY SCRAPPED AND LOAD TESTED

PRECISE END CONFIGURATIONS

All coils are scragged 100% to eliminate subsequent spring sag and load tested to ensure that they meet and maintain the required specifications.

Engineered Coil Ends are designed to fit the vehicle correctly.

Dobinsons Spring & SuspensionTM also have in some cases a Progressive Rate Design Spring to suit some particular vehicle needs. The Progressive Rate Spring Design provides both an excellent ride unladen and a much-needed increase in load carrying capacity when required. This is achieved by making the Pitch Distance between the Coils closer together at one end leaving less active coils working in the spring. This increases the rate tremendously, giving better load carrying capacity.

JAN14

xxix

JJA JAN14 AN14

Reduces risk of bolts loosening and tyre damage

Assist in prevention of driveline vibration and excessive wear (selected models only)

Reduces leaf-on-clip wear and squeaking

CLIP LINERS

Allows even load and stress distribution over the entire spring pack

DRAWN, TAPERED AND THINNED LEAF ENDS

Greatly increased spring life through shotpeening and scragging of springs to prevent sagg

SHOTPEENED AND SCRAGGED

LEAF SPRING INFO

Reduces friction at each leaf end where the load is greatest and provides a smoother ride

ANTI-FRICTION LINERS

Provides up to 50mm of lift to the vehicle and also increases the vehicles load carrying capacity

INCREASED RATE AND INCREASED CAMBER

The above spring is represented as an example only. Springs in this catalogue may not have all the above features.

NYLOC CLIP NUTS

CASTOR WEDGE

Stringent quality control procedures for Heat Treatment (Tempering) processes at all phases of manufacturing ensures Dobinsons springs are made to the highest quality every time

HEAT TREATMENT

Provides additional strength and safety for spring eyes and where possible, full military style wrap leaves are usede.

Engineered and tested spring rates match the vehicle weight and shock absorber valve forces for a complete suspension system

MATCHED SPRING RATE

Dobinsons Leaf Springs

FULL LENGTH EYE SUPPORT WRAPPERS

xxx

PART SELECTION Firstly, you may order individually any part listed in this catalogue, but we recommend that you order and fit in pairs (sets), the springs, shock absorbers and torsion bars. They have up-rated specifications and must be fitted in pairs to ensure the vehicle operate correctly. It is also recommended that where possible a complete Dobinsons suspension kit is fitted to provide the best possible outcome for vehicle handling, performance, off-road capability and load carrying capacity.

GENERAL INFO

ACCESSORIES

The QTY column on the front and rear of each page will tell you how many of that particular item is required to do 1 vehicle. For example for coils QTY is 1, so 1 pair is required for that end of the vehicle. For shock absorbers the QTY might be 2, so 2 shock absorbers are required for that end of the vehicle. In some cases there may be QTY 1 listed for 2 of the same type of items, for example 1 of each leaf springs (LH & RH), one of each u-bolt kit or shock absorbers. Pricing of all part numbers relates directly to the price list. Coil springs have a price code letter next to the part number, this letter corresponds with the letter in the price list under the coil spring section.

SPRING SELECTION Throughout this catalogue, there are many models of vehicles with a selection of spring variations. When selecting a spring, be careful to select the right springs to achieve your requirements, particularly in cases where the vehicle has additional accessories or constant loads for example a bullbar, winch, dual battery systems, roof racks, draw system, large fuel tanks, rear tyre carrier, toolboxes etc. It may be necessary to mix and match front and rear springs to suit the loads the vehicle will be carrying. It is also important to take into account the position of extra weight, for example vehicles with weight at the very rear of a long tray may cause the front of the vehicle to sit higher than expected, and the rear lower.

LIFT MEASUREMENTS & ADDITIONAL WEIGHT In most cases there are different options available providing varying amounts of lift and different load carrying capacities. All lift measurements given are only an indication of what can reasonably be expected over the original vehicles ride height. Every vehicle is different in its own right and therefore may result in higher or lower lift measurements once fitted. Where there is not a selection of springs, we have chosen the best performing spring to suit the vehicles ride height, handling, carrying and towing capacities. Springs that list additional accessories weight or constant load will provide the lift stated with that amount of weight. The weights listed for the front or rear springs of the vehicle are per end. For utility vehicles fitted with steel drop side style trays, the additional weight of the steel tray over the original vehicle style side/well back tub/tray must also be included in the constant load. For example a rear spring that has 50mm lift with 300kg’s constant load will lift the vehicle 50mm from the factory measurement with 300kg’s of load on the rear of the vehicle. The 300kg’s of constant load may consist of 200kgs of extra weight in the steel drop side tray and 100 kgs of tool boxes and tools. If the load is less than that stated in the catalogue then the vehicle will sit higher than the lift stated, and if the load is more than the vehicle will sit lower than the stated lifted. In some cases a compromise may need to be made between providing a smooth ride or additional weight carrying capacity. Springs that do not list additional accessories weight or constant load will generally be approximately 10% firmer than the original springs and are suited to most light load applications including general passenger and luggage weights, unless stated otherwise. Dobinsons Spring and Suspension TM recommended taking before and after centre of wheel hub to bottom of guard (bottom of flare or wheel arch) measurements. Once the suspension has been fitted, the vehicle must be taken for a test drive to settle the suspension correctly before recording the after measurement. Further settling of the suspension can be expected after a few thousand kilometers.

SELECTION OF OTHER SUSPENSION COMPONENTS Shock Absorbers – Dobinsons 4x4 shock absorbers are a Twin Tube Nitrogen Gas charged shock absorber made from the world’s highest quality external and internal parts. Dobinsons shock absorbers utilize an 18mm chrome piston rod and 35mm bore for most vehicles, and a 32mm bore where space requirements do not allow this. Where possible Dobinsons design and test each part number to provide a longer shock for more wheel travel, firmer valving for a more controlled ride and increased oil capacity for cooler operation in harsh conditions than the original vehicle shock absorbers. Therefore Dobinsons recommended that when a suspension lift has been fitted to the vehicle, or the vehicle is carrying extra weight that Dobinsons 4x4 shock absorbers are fitted in conjunction with springs, and in some cases it is a necessity to ensure sufficient downward wheel travel(outlined in notes on these particular vehicles). In some cases a softer option is also available and this is recommended for vehicles with light or no loads. Torsion bars – Dobinsons torsion bars provide an increased rate and firmer ride over the original torsion bars and are recommended when the vehicle is fitted with additional accessories of 70kgs or more. It is recommended that a minimum of 50mm downward wheel travel be kept when adjusting torsion bars. Poly Urethane bushes – Dobinsons Polyurethane Leaf spring bushes have been designed to work in conjunction with the original leaf springs as well as Dobinsons 4x4 leaf springs (unless stated otherwise). For ease of fitment it is recommended Dobinsons Polyurethane bushes are fitted when installing Dobinsons 4x4 leaf springs. For ease of bush maintenance it is also recommended that Greasable shackles also be fitted in conjunction with polyurethane bushes. JAN14

xxxi

GENERAL INFO

General ACCESSORIES

SELECTION OF OTHER SUSPENSION COMPONENTS ... conƟnued Greasable Shackles – Dobinsons 4x4 Greasable shackles and pins have been designed to work with both the original leaf spring bushes and Dobinsons Polyurethane bushes (unless stated otherwise), however greasable shackles should not be greased when being used with rubber bushes. For ease of polyurethane bush maintenance & long bush life it is recommended that greasable shackles be fitted when fitting polyurethane bushes. U-bolts – Dobinsons 4x4 U-bolts are made from high quality, 10.9 grade high tensile steel and it is recommended that when replacing leaf springs that new u-bolts are fitted. Fitting Dobinsons u-bolts is also a necessity on most heavy duty leaf spring packs due to the length increase required for thicker spring packs. Underbody Bush kits- Dobinsons polyurethane underbody bush kits are not a necessity when fitting a suspension kit, but is recommended when the vehicles underbody bushes are worn and need replacing. Steering Dampers – Dobinsons 4x4 steering dampers have been designed with a larger capacity and 50/50 valving to provide smooth controlled steering in both directions. Alignment & Extension Parts – It is recommended that certain alignment parts be fitted in conjunction with the suspension kit when a suspension lift has been fitted to the vehicle. Where applicable the rear brake proportioning valve adjusters/extensions should be fitted to allow normal braking operation. For suspension lifts of up to 50mm a castor bush kit is recommended but not mandatory, a wheel alignment is recommended to determine whether a castor bush kit is required. For lifts above 50mm, castor correction is required. Some vehicles also have additional driveline spacers, gearbox spacers and other parts which may be required when fitting a suspension lift. These part requirements will be outlined in notes on each page.

BUILT ON PRIDE, DEVELOPED WITH TECHNOLOGY Dobinsons Spring & Suspension TM, established in 1953, is largely based on Leaf and Coil Spring Manufacturing and the supply of Suspension Components. With several generations of family ownership and experiences, Dobinsons has become one of the leaders in the Spring Industry in Australia applying the years of knowledge into their products. The success of the business has come about by providing quality products, acquiring and using technical knowledge and having the equipment to perform and provide professional service. Our quality of design and manufacture is what sets us apart from our competitors, if not the price. The company manufactures and repairs a large range of springs and sells a comprehensive range of suspension components. We have over 13,000 spring specifications on hand and computerised spring design programs provide us with professional and accurate results. For the past 25 years, Dobinsons Spring & Suspension TM have been exporting their products to different parts of the world and their name has become synonymous with quality in these countries. Our Head Office is situated in Rockhampton with Distributors worldwide. Dobinsons Spring & Suspension TM has the ability to give a very fast service by combining our large amount of stock on hand, and by using our manufacturing plant to make the Leaf and Coil Springs quickly. A factor that, combined with our friendly and helpful staff, makes us an unbeatable supplier of Quality Suspension Components. There are thousands of parts kept in stock, including Coil Springs, Leaf Springs, Torsion Bars, Shock Absorbers, Greasable Shackle Kits and Pins, U-Bolts, Polyurethane Bushes, Centre Bolts, Castor Wedges & 4x4 Accessories.

RESEARCH AND DEVELOPMENT Dobinsons Spring & Suspension TM is committed to quality and to achieve this, much research and development has been done in the past and will continue into the future as new products are released. Furthermore Dobinsons Spring & Suspension TM have recently gained ISO9001:2008 quality management systems approval as we continue to develop and improve the quality of our products and service. It is in our best interest to keep advancing our product range so the ultimate spring & suspension components are achieved. The Leaf and Coil Springs in this catalogue have all been designed to suit Australian conditions, which are some of the harshest in the world. We believe our products, in most cases, are purchased to achieve improvement in four major areas: Lift, Handling, Heavy Loading, Off-Road Capability & Towing. By purchasing from Dobinsons’ superior range of springs, the above 5 characteristics can be achieved to produce the ultimate combination of suspension systems. Research and Development are in the very heart of Dobinsons Spring & Suspension TM.

OTHER SUSPENSION REQUIREMENTS

(Not Listed in this Catalogue).

This 4x4 Catalogue only presents a small amount of Vehicles and Models. Dobinsons Spring & Suspension TM handle a vast range of vehicles, and have specifications for over 13,000 springs. We cater for all vehicles, from small passenger cars up to the large trucks. With an extensive stock of Leaf & Coil Springs, Shackle Pins & Kits, U-Bolts, Shock Absorbers, Torsion Bars, Polyurethane Bushes, and most other suspension components, Dobinsons Spring & Suspension TM can supply the parts for you to...

xxxii

JAN14

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Courier / Ranger

FORD

Ford

TORSION BAR

PART NUMBER Price Code (if applicable)

REAR

QTY

QTY

FRONT

FORD

MODEL: U.F.S. YEAR: 1987 - 11/2006 PC/PH 4.0L V6 DETAIL: Pickup / Dual Cab Mazda Proceed, Ranger 2000 FORD-51 Suspension Fits PC/PH 4x2 & 4x4

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

5+2 Leaves Raised Height (35mm Lift) Up to 100Kg Constant Load 2 MAZ-003-R 6+2 Leaves Heavy Duty Raised Height (35mm Lift) 200Kg Constant Load 2 B2600-4X4-R

SHACKLE BUSH KIT

Heavy Duty Rate Increased Length 926mm 1 TB39-1546

Kit Contains: 2 x SPF311 4 x SPF502 4 x SPF753 1 PB39-1058K

SHOCK ABSORBER U-BOLT KIT

Kit Contains: 2 x UB59-453-3 2 UB59-453-3K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS19-081T SHACKLE KIT

Heavy Duty Twin Tube Gas 2 GS19-082P

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SK59-010

Raised Height measurements are listed as a guide only

JAN14 Rev.1

1

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Ranger (Series I)

FORD

TORSION BAR

PART NUMBER Price Code (if applicable)

REAR

QTY

FRONT

QTY

FORD

MODEL: PJ, PK YEAR: 2007 to 08/2011 Highrider 3.0L TD DETAIL: Pickup / Dual Cab Mazda BT-50 FORD-60 Suspension Fits 4x4 & 4x2 Highrider

LEAF SPRING S G

PART NUMBER Price Code (if applicable)

Two Stage

3+2 Leaves Medium Duty Raised Height (40mm Lift) Up to 100Kg Constant Load 2 L39-030-R

Heavy Duty Rate Increased Length 1024mm x 27mm 1 TB39-1551

NOTE: for Latin American models check the OE Torsion Bar length before ordering, as there are some models with a 926mm long Torsion Bar

4+2 Leaves Heavy Duty Raised Height (45mm Lift) 280Kg Constant Load 2 L39-031-R 5+2 Leaves Super Heavy Duty Raised Height (40mm Lift) 420Kg Constant Load 2 L39-032-R SHACKLE BUSH KIT

Heavy Duty Rate Increased Length 926mm 1 TB39-1546 Kit Contains: 2 x PB59-1503 4 x SPF502 4 x SPF753 1 PB39-1056K

SHOCK ABSORBER

U-BOLT KIT

Kit Contains: 2 x UB21-466 2 UB21-466K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS19-081T SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-010 PIN KIT

Heavy Duty Twin Tube Gas 2 GS19-082P

2

JAN14 Rev.2

Greasable: Fit in Pairs 2 SP59-060

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Ranger (Series II)

FORD

YEAR: 08/2011 on

FORD

MODEL: PX

PART NUMBER

REAR

Price Code

COIL SPRING

QTY

FRONT

QTY

DETAIL: Pickup / Style Side / Ranger T6 South Africa Well Back / Tray Back FORD-62 Also Suits 4x2 Highrider

LEAF SPRING

(if applicable)

PART NUMBER Price Code

(if applicable)

Two o Stage

3+3 Leaves Medium Duty Raised Height (40mm Lift) Up to 100Kg Constant Load 2 L19-131-R

XL Trayback 2.2L (Single Cab) XL Pickup 2.2L / 3.2L (Dual Cab) XL & XLT Pickup 3.2L (Extra Cab) 4x2 Highrider Linear Rate Raised Height (40mm Lift) Comfort Option (reduced rate) 50-90Kg Accessories 1 C19-428

(B)

Linear Rate Raised Height (40mm Lift) No Accesories 1 C19-420

(B)

Linear Rate Raised Height (40mm Lift) 50-90Kg Accesories 1 C19-422

(B)

4+3 Leaves Heavy Duty Raised Height (40mm Lift) 280Kg Constant Load (Recommended) 2 L19-132-R 5+3 Leaves Super Heavy Duty Raised Height (40mm Lift) 500Kg Constant Load 2 L19-133-R TAILSHAFT SPACER KIT

Tailshaft Centre Bearing Spacer Kit

Helps to reduce Driveline Vibration in Lifted Vehicles

XL Trayback 2.2L, Dual Cab XL Trayback 3.2L, Single Cab, Extra Cab XLT + Wildtrack 3.2L Pickup, Dual Cab Linear Rate Raised Height (35mm Lift) Comfort Option (reduced rate) 50-90Kg Accessories 1 C19-428

1 WA19-526K

SHACKLE BUSH KIT

Kit Contains: 2 x PB19-1523 4 x PB19-1524 4 x PB19-1525 1 PB19-1104K

(B)

U-BOLT KIT

Linear Rate Raised Height (40mm Lift) No Accesories 1 C19-422

(B)

Linear Rate Raised Height (40mm Lift) 50-90Kg Accesories 1 C19-424

(B)

Kit Contains: 2 x UB21-466 2 UB21-466K SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS19-081T SHACKLE KIT

Heavy Duty Twin Tube Gas 2 GS19-092 STRUT CAP

Greasable: Fit in Pairs 2 SK19-058 PIN KIT

2 SC19-009

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-060

Raised Height measurements are listed as a guide only

JAN14 Rev.1

3

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Maverick

FORD

FORD

MODEL: Y60

YEAR: 1988 - 1994

DETAIL: Station Wagon, SWB & LWB Australia FORD-53

REAR

Price Code

COIL SPRING

Suits:

PART NUMBER

(B)

1 C45-102

(B)

Linear Rate - Raised Height (75mm Lift) 1 C45-108 4.2L Petrol & 2.8L TD Linear Rate - Standard Height 1 C45-098 Linear Rate - Raised Height (45mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C45-102

(B)

Linear Rate - Raised Height (75mm Lift) 1 C45-108

(B)

Suits:

4.2L Diesel Variable Rate - Raised Height (45mm Lift) 1 C45-110V Linear Rate - Raised Height (45mm Lift) Extra Heavy Duty 70 - 120Kg Accessories (Bull Bar and Winch) 1 C45-104

(B)

Linear Rate - Raised Height (75mm Lift) Heavy Duty 60 - 110Kg Accessories (Bull Bar and Winch) 1 C45-108

Variable Rate - Raised Height (45mm Lift) Up to 100Kg Constant Load 1 C45-111VT Variable Rate - Standard Height (10mm Lift) Extra Heavy Duty Medium Load 1 C45-145VT Variable Rate - Raised Height Exrta Heavy Duty 1 C45-115VT

(B)

(B)

(B)

Raised Height (75mm Lift) No Load 1 C45-129 Linear Rate Raised Height (75mm Lift) 350Kg Constant Load 1 C45-309T Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 450Kg Constant Load 1 C45-105T

OR

(B)

(B)

SHOCK ABSORBER

(C)

(C)

Kit Includes Front & Rear Under Body Bushes

See Rear Under Body Bush Kit

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front Panhard Rod Bush Rear Panhard Rod Bush Rear Trailing Arm Bush on

4 4 4 8

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front & Rear Panhard Rod Bush Rear Upper & Lower Trailing Arm Bush

Adjustable Front Radius Arm Castor Kit

1 PB59-503K

Fixed Rubber Front Radius Arm Castor Kit

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

SWAYBAR EXTENSIONS 2 SE45-520 1 TC45-001K

Drive line vibration may occur with raised suspension. To reduce vibration we recommend fitting the above kit.

JAN14

(B)

For Loaded Vehicles 2 GS59-703

4x 4x 2x 2x 8x 1989

CASTOR ADJUSTMENT PARTS

4

(C)

UNDER BODY BUSH KIT

Pre 1989

GEARBOX SPACER KIT

(C)

Extra Heavy Duty Twin Tube Gas

UNDER BODY BUSH KIT

Adjustable Swaybar Extension (Suits 2” - 6” Lift)

(B)

Heavy Duty Twin Tube Gas 2 GS45-115

STEERING DAMPER Heavy Duty (Big Bore) 1988 - 08/1989 Complete with Fittings 1 SD45-834 Heavy Duty (Big Bore) 08/1989 on Complete with Fittings 1 SD45-836

Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-114

Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

(B)

Linear Rate Raised Height (50mm Lift) 250Kg Constant Load

(B)

Suits:

(if applicable)

Linear Rate Standard Height 1 C45-323 Linear Rate Raised Height (45mm Lift) 1 C45-103

3.0L Petrol 1 C45-092 1 C45-094 1 C45-096V

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Standard Height Linear Rate - Raised Height (40mm Lift) Variable Rate - Raised Height (40mm Lift) Linear Rate - Raised Height (50mm Lift) 50 - 80Kg Accessories (Bull Bar OR Winch)

QTY

QTY

FRONT

x x x x

1 PB45-1231K

1 PB45-1239K

ALIGNMENT PARTS * Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1*

SE45-520

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1*

SE45-521

BRAKE ADJUSTER Recommended when raising vehicle (Suits 2” - 6” Lift) 1

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

BA45-005

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Maverick

FORD

YEAR: 1988 - 1994

FORD

MODEL: Y60 DETAIL: Pickup Leaf Spring Suspension

FORD-54

PART NUMBER

REAR

Price Code

LEAF SPRING

QTY

QTY

FRONT

LEAF SPRING

(if applicable)

Single Stage

PART NUMBER Price Code

(if applicable)

Two Stage g

7 Lea Leaves Raised Height (45mm Lift) No Accessories 2 Y60-7L-F 5+2 Leaves Raised Height (50mm Lift) 1 Y60-5+2-R RH Up to 150Kg Constant Load 1 Y60-5+2-R LH

8 Leaves Raised Height (45mm Lift) 50-100Kg Accessories (Bull Bar and Winch) Heavy Duty (Recommended) 2 Y60-8L-F

6+2 Leaves Raised Height (50mm Lift) 300Kg Constant Load 1 Y60-6+2-R RH Heavy Duty (Recommended) 1 Y60-6+2-R LH

SHACKLE BUSH KIT

Kit Contains: 8 x SPF2260 4 x SPF2270 1 PB45-1018K

7+2 Leaves Raised Height (50mm Lift) 1 Y60-7+2-R RH 500Kg Constant Load 1 Y60-7+2-R LH

U-BOLT KIT

SHACKLE BUSH KIT

Kit Contains: 2 x UB45-669 2 UB45-669K Kit Contains: 12 x SPF2260 1 PB59-1019K

SHOCK ABSORBER U-BOLT KIT

Heavy Duty Twin Tube Gas 2 GS45-640

Kit Contains: 2 x UB45-670-1 2 UB45-670-1K

STEERING DAMPER

SHOCK ABSORBER

Heavy Duty Complete with Fittings 1 SD45-022 SHACKLE KIT

Heavy Duty Twin Tube Gas (Big Bore) 2 GS45-125

Greasable:Fit in Pairs 2 SK59-019 Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

Greasable: Fit in Pairs 2 SP45-026

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

SHACKLE KIT

Greasable:Fit in Pairs 2 SK59-019 Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

Greasable: Fit in Pairs 2 SP45-026

Raised Height measurements are listed as a guide only

JAN14

5

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: “F” Series

FORD

FORD

MODEL: F250 4x4

YEAR: 2001 - 11/2006

DETAIL: 4.2L 6 Cyl Turbo Diesel 7.3L Diesel FORD-57

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Single Stage

REAR

QTY

QTY

FRONT

LEAF SPRING

PART NUMBER Price Code (if applicable)

Two Stage

7.3L Turbo Diesel Raised Height (50mm Lift) 6 Leaf Multi Leaf Spring FORD-010-F LH Replaces 2 Leaf Parabolic 2 FORD-010-F RH

4+2 Leaves Raised Height (50mm Lift) 2 FORD-014-R

4.2L Turbo Diesel Raised Height (50mm Lift) 5 Leaf Multi Leaf Spring FORD-011-F LH Replaces 2 Leaf Parabolic 2 FORD-011-F RH

5+2 Leaves Heavy Duty Raised Height (50mm Lift) 300Kg Constant Load 2 FORD-015-R

When fitting the above springs, U-Bolt part number UB19-921K Must be fitted

When fitting the above springs, longer U-Bolts are required

SHACKLE BUSH KIT SHACKLE BUSH KIT

Front of Front 2 PB19-1504 Rear of Front 2 PB19-1505 Front of Front 2 PB19-1504 Rear of Front 2 PB19-1505

U-BOLT KIT

Kit Contains: 2 x UB19-921 2 UB19-921K

U-BOLT KIT

SHOCK ABSORBER

Kit Contains: 2 x UB19-922 2 UB19-922K

Heavy Duty Twin Tube Gas 2 GS59-650A

SHOCK ABSORBER

AIR BAG KIT

Bellows Type 1 RR4557 ADJUSTABLE PANHARD ROD

Complete with Bushes 1 PR19-1400

6

JAN14

Heavy Duty Twin Tube Gas 4 GS45-915A

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

FORD

TYPE: “F” Series YEAR: 2009 - 2014

FORD

MODEL: F250 4x4 DETAIL: Single & Dual Cab, Super Duty

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

FORD-64

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

Petrol

Note: Fit OE U-bolt cap to this spring

Linear Rate Raised Height (95mm Lift) Comfort Option Up to 80Kg Accessories (Bull Bar and Winch) 1 C19-346

(C)

Linear Rate Raised Height (85mm Lift) 80-170Kg Accessories (Bull Bar and Winch) 1 C19-342

(C)

3+2 Leaves Raised Height (75mm Lift) Heavy Duty 2 L19-8169-R

SHACKLE BUSH KIT Diesel

Linear Rate Raised Height (60mm Lift) Comfort Option Up to 80Kg Accessories (Bull Bar and Winch) 1 C19-342 Linear Rate Raised Height (60mm Lift) Up to 80Kg Accessories (Bull Bar and Winch) 1 C19-322 Linear Rate Raised Height (60mm Lift) 80-170Kg Accessories (Bull Bar and Winch) 1 C19-324

(C)

Rear of Rear 2 PB19-1505 Shackle 2 PB19-1505 (D)

U-BOLT KIT (E)

SHOCK ABSORBER

Kit Contains: 2 x UB19-5061 2 UB19-5061K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-784 Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Hydraulic 2 TS90-314 Raised Height measurements are listed as a guide only

JAN14 Rev.4

7

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

FORD

TYPE: “F” Series

FORD

MODEL: F350 4x4

YEAR: 2005 - 2008

DETAIL: Single & Dual Cab, SWB & LWB Mono Beam Front Axle with Coil Suspension

FORD-61

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

Single Rear Wheel

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage plus Helper

Main Spring Helper Spring

5+2 Leaves 6 Leaves Raised Height (70mm Lift) Heavy Duty 300Kg Constant Load 2 FORD-021-R

Main Spring Helper Spring

5+2 Leaves 7 Leaves Extra Heavy Duty Raised Height (70mm Lift) 500Kg Constant Load 2 FORD-022-R

Main Spring Helper Spring

6+2 Leaves 7 Leaves Super Heavy Duty Raised Height (70mm Lift) 1000Kg Constant Load 2 FORD-023-R

Petrol

Linear Rate Raised Height (95mm Lift) Comfort Option Up to 80Kg Accessories (Bull Bar and Winch) 1 C19-346

(C)

Linear Rate Raised Height (85mm Lift) 80-170Kg Accessories (Bull Bar and Winch) 1 C19-342

(C)

Diesel

Linear Rate Raised Height (60mm Lift) Comfort Option Up to 80Kg Accessories (Bull Bar and Winch) 1 C19-342

(C)

Linear Rate Raised Height (60mm Lift) Up to 80Kg Accessories (Bull Bar and Winch) 1 C19-322

(D)

Linear Rate Raised Height (60mm Lift) 80-170Kg Accessories (Bull Bar and Winch) 1 C19-324

(E)

SHACKLE BUSH KIT

Front of Rear 2 PB19-1504 Rear of Rear 2 PB19-1505 Shackle 2 PB19-1505

SHOCK ABSORBER U-BOLT KIT

Kit Contains: 2 x UB19-924 2 UB19-924K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-784

8

JAN14 Rev.3

Heavy Duty Hydraulic 2 TS90-314

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Expedition

FORD

YEAR: 2008 on

FORD

MODEL: DETAIL: 4x4 119” Wheelbase

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (45mm Lift) No Accessories 1 C19-430

Linear Rate Raised Height (45mm Lift) 80-100Kg Accessories (Bull Bar and Winch) 1 C19-432

QTY

FRONT

QTY

FORD-63

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (45mm Lift) 1 C19-431

(D)

Linear Rate Raised Height (45mm Lift) 200Kg Constant Load 1 C19-433

(D)

(C)

(C)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS19-030

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS19-031

Raised Height measurements are listed as a guide only

JAN14

9

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

TYPE: Avalanche, Tahoe, Suburban 1500 (1/2 Ton) YEAR: 2007 on

GM / CHEVROLET

MODEL: Including XL Models

GMC-50

PART NUMBER Price Code

COIL SPRING

SHOCK ABSORBER

Heavy Duty Adjustable Twin Tube Gas 2 GS09-170

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height 1 C09-044

JAN14

REAR

QTY

FRONT

10

GM / Chevrolet

DETAIL: GMT 900 Series Platform 4x4

QTY

GM / CHEVROLET

4X4

(if applicable)

Linear Rate Raised Height 1 C09-045

(C)

(B)

SHOCK ABSORBER

Heavy Duty Adjustable Twin Tube Gas 2 GS09-171

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Cadillac Escalade , Yukon

General Motors

QTY

MODEL: Cadillac Escalade ESV/EXT YEAR: 2007 on Yukon 1500 (1/2 Ton - Incl XL & Denali) DETAIL: GMT 900 Series Platform 4x4 GMC-51

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height 1 C09-045

(C)

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Adjustable Twin Tube Gas 2 GS09-170

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height 1 C09-044

QTY

GENERAL MOTORS

FRONT

GENERAL MOTORS

MAKE:

Heavy Duty Adjustable Twin Tube Gas 2 GS09-171

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14

11

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

GREAT WALL

TYPE: WINGLE, SAILOR

MODEL: V200, V240

Great G reat Wall Wall

YEAR: 06/2009 on

DETAIL: 4x2, 4x4 Pickup 2.4L

FRONT TORSION BAR

PART NUMBER Price Code (if applicable)

GRW-50

REAR

QTY

Suspension Fits 4x2 & 4x4 Models

QTY

GREAT WALL

4X4

PART NUMBER Price Code

S NG LEAF SPRING

(if applicable)

Two Stage

4+2 Leaves Raised Height (50mm Lift) Softer Option 2 RODE-011-R Above spring has a 200Kg reduced carrying capacity

4+3 Leaves Raised Height (50mm Lift) 2 RODE-012-R 5+3 Leaves Raised Height (50mm Lift) 150Kg Constant Load 2 RODE-013-R SHACKLE BUSH KIT

Heavy Duty Rate Increased Length 1145mm 1 TB21-1550

Kit Contains: 2 x SPF972 8 x SPF2231 1 PB59-1069K

Check length before ordering

SHOCK ABSORBER

U-BOLT KIT

Kit Contains: 2 x UB21-466 2 UB21-466K SHOCK ABSORBER

Medium Duty Twin Tube Gas 2 GS59-649 Heavy Duty Twin Tube Gas 2 GS59-651 SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-009 PIN KIT

Heavy Duty Twin Tube Gas 2 GS21-463

12

JAN14 Rev.2

Greasable: Fit in Pairs 2 SP59-060

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 GREAT WALL

TYPE: Hover, Safe, Haval

MODEL: X200, X240 (Australia) Hover/Haval H3 & H5 DETAIL: T/D 2.0L, Petrol 2.4L 4x4, Rigid Axle

GREAT WALL

MAKE:

YEAR: 2005 on

TORSION BAR

PART NUMBER Price Code (if applicable)

Heavy Duty Rate Increased Length 1145mm 1 TB21-1550

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS21-463

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

REAR COIL SPRING

QTY

FRONT

QTY

GRW-51

PART NUMBER Price Code

(if applicable)

Linear Rate Standard Height 2 C45-009

(B)

Linear Rate Raised Height (30mm Lift) 2 C45-091

(B)

Linear Rate Raised Height (30mm Lift) 250Kg Constant Load 2 C45-089

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-225A

Raised Height measurements are listed as a guide only

JAN14 Rev.3

13

ENJOY THE RIDE...

...RIDE TO ENJOY

4X4 MAKE:

TYPE: Jackaroo

HOLDEN-GM-ISUZU

MODEL: U.B.S. 13, 16, 52

YEAR: 1982 - 10/1986

Holden - GM - Isuzu

DETAIL: LWB Wagon, Isuzu-Trooper Big Horn. HOLD-51

FRONT TORSION BAR

PART NUMBER Price Code (if applicable)

REAR

QTY

Up to Chassis No. 4524288

QTY

HOLDEN ͳ GM ͳ ISUZU

SPRING & SUSPENSION

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

4+2 Leaves Raised Height (30mm Lift) Up to 100Kg Constant Load 2 RODE-008-R

SHACKLE BUSH KIT

Kit Contains: 4 x SPF2053 8 x SPF2231 1 PB21-1047K

Heavy Duty Rate Increased Length 927mm 1 TB39-1546

U-BOLT KIT SHOCK ABSORBER

Kit Contains: 2 x UB45-451 2 UB45-451K

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-636 SHACKLE KIT

Heavy Duty Twin Tube Gas 2 GS43-082S

14

JAN14

Greasable: Fit in Pairs 2 SK59-009

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

HOLDEN ͳ GM ͳ ISUZU

4X4 TYPE: Jackaroo

HOLDEN-GM-ISUZU

MODEL: U.B.S. 16, 17, 52, 55

YEAR: 11/1986 - 1991

DETAIL: LWB Wagon, Isuzu-Trooper HOLD-53

TORSION BAR

PART NUMBER Price Code (if applicable)

REAR

QTY

FRONT

QTY

From Chassis No. 4524289

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

4+2 Leaves Raised Height (30mm Lift) Up to 100Kg Constant Load 2 RODE-008-R

SHACKLE BUSH KIT

Kit Contains: 4 x SPF972 8 x SPF2231 1 PB59-1069K

Heavy Duty Rate Increased Length 1000mm 1 TB21-1548

U-BOLT KIT SHOCK ABSORBER

Kit Contains: 2 x UB45-451 2 UB45-451K

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS21-637S SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-009 PIN KIT

Heavy Duty Twin Tube Gas 2 GS43-082S

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-060

Raised Height measurements are listed as a guide only

JAN14

15

ENJOY THE RIDE...

...RIDE TO ENJOY

4X4 MAKE:

TYPE: Jackaroo

HOLDEN-GM-ISUZU

YEAR: 1992 - 2000 2001 on DETAIL: SWB & LWB Wagon, Isuzu-Trooper, Opel/Vauxhall Monterey HOLD-55

FRONT TORSION BAR

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

MODEL: U.B.S. 26, 69, 73

QTY

HOLDEN ͳ GM ͳ ISUZU

SPRING & SUSPENSION

PART NUMBER Price Code (if applicable)

1992 - 2000 Variable Rate Standard Height (10mm Lift) 1 C21-167V

(B)

Variable Rate Raised Height (40mm Lift) Up to 100Kg Constant Load 1 C21-165V

(B)

Variable Rate Raised Height (40mm Lift) 1 C21-215V

(B)

2001 on Heavy Duty Rate Increased Length 1220mm 1 TB21-1549 SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS21-463

16

JAN14

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS21-015B

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

TYPE: Frontera / Amigo

HOLDEN-GM-ISUZU

MODEL: UT DETAIL: SWB LWB

HOLDEN ͳ GM ͳ ISUZU

4X4

YEAR: 1995 - 1998 Frontera Sport

Opel/Vauxhall

Frontera Long

Opel/Vauxhall (5 Doors)

TORSION BAR

PART NUMBER Price Code (if applicable)

REAR COIL SPRING

QTY

FRONT

QTY

HOLD-56

PART NUMBER Price Code

(if applicable)

Heavy Duty Rate Increased Length 1000mm 1 TB21-1547 Check length before ordering

Heavy Duty Rate Increased Length 1220mm 1 TB21-1549

Variable Rate Raised Height (35mm Lift) Up to 70Kg Constant Load 1 C21-161V

(B)

Check length before ordering

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS21-463

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS21-016

Raised Height measurements are listed as a guide only

JAN14

17

ENJOY THE RIDE...

...RIDE TO ENJOY

4X4 MAKE:

TYPE: Frontera

HOLDEN-GM-ISUZU

MODEL: UES25

YEAR: 02/1999 - 2002

DETAIL: SWB & LWB 3.2L V6, 2.2L TDi

FRONT TORSION BAR

PART NUMBER Price Code (if applicable)

Heavy Duty Rate Increased Length 1145mm 1 TB21-1550 Check length before ordering

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS21-463

18

JAN14

REAR COIL SPRING

QTY

HOLD-57

QTY

HOLDEN ͳ GM ͳ ISUZU

SPRING & SUSPENSION

PART NUMBER Price Code (if applicable)

Linear Rate Raised Height (35mm Lift) Up to 100Kg Constant Load 1 C45-009

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-781

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

HOLDEN ͳ GM ͳ ISUZU

4X4 TYPE: Rodeo

HOLDEN-GM-ISUZU

MODEL: KB / TFS-55 (Inc. V6)

YEAR: 08/1988 - 2003

DETAIL: Pickup, Opel/Vauxhall Campo, Brava, Isuzu KB320 (Africa)

TORSION BAR

PART NUMBER Price Code (if applicable)

REAR

QTY

FRONT

QTY

HOLD-54

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

4+2 Leaves Raised Height (35mm Lift) 200Kg Constant Load 2 RODE-008-R

SHACKLE BUSH KIT

Kit Contains: 2 x SPF972 8 x SPF2231 1 PB59-1069K Heavy Duty Rate Increased Length 1000mm 1 TB21-1547

U-BOLT KIT

SHOCK ABSORBER

Kit Contains: 2 x UB59-453-3 2 UB59-453-3K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-081B SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-009 PIN KIT

Heavy Duty Twin Tube Gas 2 GS21-463

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-060

Raised Height measurements are listed as a guide only

JAN14

19

ENJOY THE RIDE...

...RIDE TO ENJOY

4X4 HOLDEN-GM-ISUZU

TFS-77 MODEL: Rodeo RA Colorado RC TFS-85 DETAIL: Pickup, Isuzu KB, D-Max 2.4L, 3.5L V6, 3.0L TDi, 2.5L TDi (D-Max)

FRONT TORSION BAR

TYPE: Rodeo RA Colorado RC YEAR: 03/2003 - 2008 09/2008 - 05/2012

HOLD-59

PART NUMBER Price Code (if applicable)

REAR

QTY

MAKE:

QTY

HOLDEN ͳ GM ͳ ISUZU

SPRING & SUSPENSION

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

4+2 Leaves Raised Height (35mm Lift) Softer Option 2 RODE-011-R Above spring has a 200Kg reduced carrying capacity

4+3 Leaves Raised Height (35mm Lift) 2 RODE-012-R 5+3 Leaves Raised Height (45mm Lift) 150Kg Constant Load 2 RODE-013-R Heavy Duty Rate Increased Length 1145mm 1 TB21-1550

SHACKLE BUSH KIT

Kit Contains: 2 x SPF972 8 x SPF2231 1 PB59-1069K

Check length before ordering

U-BOLT KIT SHOCK ABSORBER

Kit Contains: 2 x UB21-466 2 UB21-466K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-636 Heavy Duty Twin Tube Gas Big Bore 2 GS59-651B SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-009 PIN KIT

Heavy Duty Twin Tube Gas 2 GS21-463

20

JAN14

Greasable: Fit in Pairs 2 SP59-060

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

HOLDEN ͳ GM ͳ ISUZU

4X4 TYPE: Colorado RG

HOLDEN

MODEL: GM 1700,

YEAR: 05/2012 on

RG MMU142/143/145/147/148

DETAIL: 2.8L Turbo Diesel Single Cab / Dual Cab

This vehicle has been issued with a recall notice to change the Coil Spring Stepped Isolator. Take care when ordering Coil Springs or Shock Absorbers.

COIL SPRING

PART NUMBER

REAR

Price Code

LEAF SPRING

(if applicable)

(B)

4+3 Leaves Heavy Duty Raised Height (40mm Lift) 250Kg Constant Load (Recommended) 2 L21-141-R

(B)

27/04/2013 on

5+3 Leaves Super Heavy Duty Raised Height (40mm Lift) 450Kg Constant Load 2 L21-142-R SHACKLE BUSH KIT

ALSO SUITS vehicles 05/2012 - 26/04/2013 with the new Coil Spring Stepped Isolator fitted

Linear Rate Standard Height (10mm Lift) 50-100Kg Accesories 1 C21-382 Linear Rate Raised Height (40mm Lift) Up to 50Kg Accesories 1 C21-384 Linear Rate Raised Height (40mm Lift) 50-100Kg Accesories 1 C21-386

Price Code

(if applicable)

3+3 Leaves Medium Duty Raised Height (40mm Lift) Up to 100Kg Constant Load 2 L21-140-R

NOT for vehicles that have had the new Coil Spring Stepped Isolator fitted

Linear Rate Raised Height (40mm Lift) 50-100Kg Accesories 1 C59-296

PART NUMBER

Two Stage

05/2012 - 26/04/2013

Linear Rate Raised Height (40mm Lift) No Accesories 1 C59-134

QTY

FRONT

QTY

HOLD-60

Kit Contains: 2 x PB59-1503 4 x PB59-1530 4 x PB59-1532 1 PB21-1105K

(B)

U-BOLT KIT (B)

(B)

Kit Contains: 2 x UB59-453-2 2 UB59-453-2K 2 x UB59-453-2 2 UB59-453-2K 2 x UB59-437 2 UB59-437K

L21-140-R L21-141-R L21-142-R

SHOCK ABSORBER SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-801 SHACKLE KIT

Greasable: Fit in Pairs 2 SK21-059 PIN KIT

Heavy Duty Twin Tube Gas 2 GS21-470 Greasable: Fit in Pairs 2 SP59-060

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14 Rev.2

21

ENJOY THE RIDE...

...RIDE TO ENJOY

4X4 MAKE:

TYPE: Colorado 7 SUV / Trailblazer zer

HOLDEN-CHEVROLET

MODEL: 2nd Generation

YEAR: 2012 on

DETAIL: 2.8L Diesel, 2.5L Diesel

FRONT COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (40mm Lift) No Accesories 1 C59-134 Linear Rate Raised Height (40mm Lift) 50-100Kg Accesories 1 C59-296

QTY

HOLD-61

QTY

HOLDEN ͳ GM ͳ ISUZU

SPRING & SUSPENSION

PART NUMBER Price Code (if applicable)

(B)

Linear Rate Raised Height (40mm Lift) No Load 1 C21-403

(B)

(B)

Linear Rate Raised Height (40mm Lift) 150-250Kg Constant Load 1 C21-407

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS21-470

STRUT CAP

2 SC59-002

22

JAN14 Rev.1

Heavy Duty Twin Tube Gas 2 GS59-940D

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

HOLDEN ͳ GM ͳ ISUZU

4X4 TYPE: D-Max

ISUZU

MODEL: TFS85, V-CROSS

YEAR: 05/2012 on

DETAIL: 3.0L Turbo Diesel Single Cab / Dual Cab

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

ISUZ-51

LEAF SPRING

(if applicable)

PART NUMBER Price Code

(if applicable)

Two Stage

3+3 Leaves Medium Duty Raised Height (40mm Lift) Up to 100Kg Constant Load 2 L21-140-R Linear Rate Raised Height (20mm Lift) No Accesories 1 C59-134

Linear Rate Raised Height (40mm Lift) No Accesories 1 C59-296

(B)

4+3 Leaves Heavy Duty Raised Height (40mm Lift) 250Kg Constant Load (Recommended) 2 L21-141-R 5+3 Leaves Super Heavy Duty Raised Height (40mm Lift) 450Kg Constant Load 2 L21-142-R

(B)

SHACKLE BUSH KIT

Kit Contains: 2 x PB59-1503 4 x PB59-1530 4 x PB59-1532 1 PB21-1105K Linear Rate Raised Height (40mm Lift) 50-100Kg Accesories 1 C59-300

U-BOLT KIT (B)

Kit Contains: 2 x UB59-453-2 2 UB59-453-2K 2 x UB59-453-2 2 UB59-453-2K 2 x UB59-437 2 UB59-437K

L21-140-R L21-141-R L21-142-R

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-801 SHACKLE KIT

Heavy Duty Twin Tube Gas 2 GS21-470 Greasable: Fit in Pairs 2 SK21-059 STRUT CAP

PIN KIT

2 SC59-002

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-060

Raised Height measurements are listed as a guide only

JAN14

23

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

ISUZU

MAKE:

ISUZU

TYPE: MU-7

MODEL:

YEAR: 2005 - 2012

DETAIL: 4x4 Station Wagon 3.0L DOHC

TORSION BAR

PART NUMBER Price Code (if applicable)

REAR

QTY

FRONT

QTY

ISUZ-50

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

4+2 Leaves Raised Height (35mm Lift) 2

RODE-011-R

4+3 Leaves Raised Height (35mm Lift) Up to 150Kg Constant Load 2 RODE-012-R

SHACKLE BUSH KIT

Heavy Duty Rate Increased Length 1145mm 1 TB21-1550 Check length before ordering

Kit Contains: 2 x SPF972 8 x SPF2231 1 PB59-1069K SHOCK ABSORBER U-BOLT KIT

Kit Contains: 2 x UB21-466 2 UB21-466K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-636 SHACKLE KIT

Heavy Duty Twin Tube Gas 2 GS21-463

24

JAN14

Greasable: Fit in Pairs 2 SK59-009

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts Raised are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TYPE:

Terracan Santa Fe

HYU-51

HYU-52

Hyundai

FRONT

QTY

MODEL: YEAR:

Terracan HP 11/2001 - 2008 3.5L V6, 2.9L

PART NUMBER Price Code

Terracan

REAR

PART NUMBER Price Code (if applicable)

COIL SPRING

TORSION BAR

Heavy Duty Rate Increased Length 1275mm 1 TB25-1248

Variable Rate Standard Height (10mm Lift) 1 C43-047V

(B)

Variable Rate Raised Height (45mm Lift) Up to 100Kg Constant Load 1 C43-043V

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-223

Heavy Duty Twin Tube Gas 2 GS45-087

REAR

COIL SPRING

PART NUMBER Price Code

Santa Fe

(if applicable)

QTY

QTY

PART NUMBER Price Code

Santa Fe

Santa Fe SM 2000 - 05/2006 2.7L V6, 2.4L, 2.0L TD

Terracan

(if applicable)

FRONT

MODEL: YEAR:

QTY

HYUNDAI

HYUNDAI

MAKE:

(if applicable)

COIL SPRING

Linear Rate Standard Height 1 C25-026

(B)

Linear Rate Raised Height (20mm Lift) 1 C25-028

(B)

Linear Rate Standard Height 1 C25-027

(B)

Linear Rate Raised Height (35mm Lift) 1 C25-029

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-940 Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts Raised are listed as a guide only

JAN14 Rev.1

25

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

JEEP

MAKE:

TYPE: Cherokee

JEEP

Jeep Jeep

MODEL: XJ

YEAR: 94 - 01 (Australia) 84 - 01 (Europe) DETAIL: Classic, Limited, Sport, Midsize

COIL SPRING

PART NUMBER

REAR

Price Code (if applicable)

QTY

FRONT

QTY

JEEP-51

PART NUMBER Price Code (if applicable)

LEAF SPRING Single Stage

CHEROKEE SPORTS models have a higher ride height than LIMITED and CLASSIC models LH Drive models require both sides to be fitted with the RH spring CHEROKEE SPORTS models have a higher ride height than LIMITED and CLASSIC models

OR

5 Leaves 1 JEEP-005-R RH Raised Height (45mm Lift) 1 JEEP-005-R LH

Linear Rate Raised Height (45mm Lift) No Accessories

Raised Height (35mm Lift) 50-100Kg Accessories (Bullbar & Winch) 1 C29-016

SHACKLE BUSH KIT (B)

Kit Contains: 2 x SPF969 2 x SPF970 2 x SPF1080 1 PB29-1080K

SHOCK ABSORBER

U-BOLT KIT

Kit Contains: 2 x UB45-451 2 UB45-451K

Heavy Duty Twin Tube Gas 2 GS29-420

Above part to suit Chrysler Differential

STEERING DAMPER

Kit Contains: 2 x UB29-900 2 UB29-900K Above part to suit Dana 35 Differential

Heavy Duty (Big Bore) Complete with Fittings 1 SD29-840

SHOCK ABSORBER

SD29-840 is supplied with two styles of mounting pin Dispose of the pin that is not required

Above part to suit LH & RH Drive Vehicles Does not suit LIMITED models

26

JAN14

Heavy Duty Twin Tube Gas 2 GS29-425

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Cherokee

JEEP

JEEP

MODEL: KJ YEAR: 10/2001 - 2008 Liberty (USA) DETAIL: 3.7L V6, 2.4L, 2.8L CRD

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

JEEP-55

PART NUMBER Price Code

(if applicable)

3.7L V6, 2.4L Linear Rate Raised Height (35mm Lift) 50Kg Accessories (Bull Bar OR Winch) 1 C29-020

(B)

Linear Rate Raised Height (35mm Lift) 50-100Kg Accessories (Bull Bar and Winch) 1 C29-022

(B)

2.8L CRD Linear Rate Raised Height (35mm Lift) 50Kg Accessories (Bull Bar OR Winch) 1 C29-022

(B)

Linear Rate Raised Height (35mm Lift) 1 C29-021

(B)

Linear Rate Raised Height (40mm Lift) 180Kg Constant Load 1 C29-023

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-723

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Twin Tube Gas 2 GS29-724

Raised Height measurements are listed as a guide only

JAN14

27

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

JEEP

MAKE:

JEEP

TYPE: Cherokee

MODEL: KK

YEAR: 02/2008 on

DETAIL: 3.7L V6, 2.8L TD Limited and Sports Only

COIL SPRING

PART NUMBER Price Code

PART NUMBER Price Code (if applicable)

Linear Rate Standard Height (10mm Lift) 1 C29-082

(B)

Linear Rate Standard Height (10mm Lift) 1 C29-083

(B)

Linear Rate Raised Height (40mm Lift) 1 C29-084

(B)

Linear Rate Raised Height (40mm Lift) 1 C29-085

(B)

Heavy Duty Twin Tube Gas 2 GS29-723

JAN14

COIL SPRING

(if applicable)

SHOCK ABSORBER

28

REAR

QTY

FRONT

QTY

JEEP-59

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-724

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Grand Cherokee

JEEP

YEAR: 04/1996 - 1999

JEEP

MODEL: ZJ - ZG

DETAIL: 3.1L 5 Cyl., 4.0L 6 Cyl., 5.7L V8

COIL SPRING

3.1L 5 Cyl., 4.0L 6 Cyl.

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (35mm Lift) No Accessories 1 C29-002

(B)

Linear Rate Raised Height (35mm Lift) 40-90Kg Accessories (Bull Bar and Winch) 1 C29-016

(B)

QTY

FRONT

QTY

JEEP-52

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (35mm Lift) 1 C29-003

(B)

Linear Rate Raised Height (50mm Lift) 150-200Kg Constant Load 1 C29-005

(B)

5.7L V8 Linear Rate Raised Height (40mm Lift) Up to 70Kg Accessories (Bull Bar OR Winch) 1 C29-036

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-420

STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD29-840 SD29-840 is supplied with two styles of mounting pin Dispose of the pin that is not required

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Twin Tube Gas 2 GS29-683

Raised Height measurements are listed as a guide only

JAN14 Rev.1

29

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 JEEP

TYPE: Grand Cherokee

FRONT COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

MODEL: WJ (Austria) YEAR: 1999 - 2004 WG (USA) DETAIL: 4.7L V8, 2.7L D, 4.0L Petrol 3.1L TD JEEP-54

QTY

JEEP

MAKE:

PART NUMBER Price Code (if applicable)

4.7L V8, 4.0L Petrol Variable Rate Lowered Height (30mm Drop) 1 C29-018V

(B)

Variable Rate Lowered Height (30mm Drop) 1 C29-019V

Linear Rate Standard Height 1 C29-008

(B)

Linear Rate Raised Height (35mm Lift) Up to 40Kg Accessories (Bull Bar OR Winch) 1 C29-010

(B)

Linear Rate Standard Height 1 C29-011

(B)

Linear Rate Raised Height (40mm Lift) 40-90Kg Accessories (Bull Bar and Winch) 1 C29-024

(B)

Linear Rate Raised Height (40mm Lift) 1 C29-025

(B)

(B)

2.7L & 3.1L T/Diesel Linear Rate Raised Height (35mm Lift) 1 C29-024 Linear Rate Raised Height (35mm Lift) 60-100Kg Accessories (Bull Bar and Winch) 1 C29-030

(B)

SHOCK ABSORBER (B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-424B STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD29-840 SD29-840 is supplied with two styles of mounting pin Dispose of the pin that is not required

30

JAN14

Heavy Duty Twin Tube Gas 2 GS59-650C

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Grand Cherokee

JEEP

YEAR: 2005 to 2010

JEEP

MODEL: Laredo WH, WK DETAIL: 3.0L TD, 3.7L V6 4.7L, 5.7L, 6.1L V8

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

JEEP-56

PART NUMBER Price Code

(if applicable)

3.0L TD, 3.7L V6 & 4.0L V8 Linear Rate Raised Height (45mm Lift) 1 C21-020

(A)

Linear Rate Raised Height (45mm Lift) 1 C21-054

(B)

Linear Rate Raised Height (45mm Lift) 1 C29-027

(B)

Linear Rate Raised Height (45mm Lift) 180Kg Constant Load 1 C29-029

(B)

5.7L & 6.1L V8

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-726

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-727

Raised Height measurements are listed as a guide only

JAN14

31

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 JEEP

TYPE: Grand Cherokee

MODEL: WK2 Laredo Limited YEAR: 2011 on Overland DETAIL: Will not suit vehicles equipped with Quadra-Lift JEEP-62

COIL SPRING

PART NUMBER

REAR

Price Code

3.6L V6 Petrol, 5.7L V8 Petrol

Linear Rate Raised Height (40mm Lift) 50-100kg Accessories (Bullbar, Winch) 1 C29-122

Linear Rate Raised Height (40mm Lift) 50-100kg Accessories (Bullbar, Winch) 1 C29-148

SHOCK ABSORBER

(if applicable)

Only to be fitted to vehicles with Self Levelling Nivomat Shock Absorber (OE 63mm OD body)

(B)

(B)

Linear Rate Raised Height (40mm Lift) 1 C29-123T

(C)

Linear Rate Raised Height (40mm Lift) 150-300kg Constant Load 1 C29-143T

(C)

To be fitted to vehicles without Self Levelling Nivomat Shock Absorber (OE 50mm OD body)

3.0L CRD V6 Diesel Linear Rate Raised Height (40mm Lift) 1 C29-128

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (40mm Lift) Up to 40kg Accessories (Bullbar) 1 C29-120

QTY

FRONT

QTY

JEEP

MAKE:

(B)

Linear Rate Raised Height (40mm Lift) 1 C29-125T

(C)

(B)

Linear Rate Raised Height (40mm Lift) 150-200kg Constant Load 1 C29-127T

(C)

SHOCK ABSORBER Will not replace Self Levelling Nivomat Shock absorber on vehicles with 3.5 ton towing capacity For Nivomat Suspension conversion, Coil Spring C29-125T and Shock Absorber GS29-731 can be fitted; Note towing capacity is reduced to 2.5 ton

Heavy Duty Twin Tube Gas 2 GS29-731

Heavy Duty Twin Tube Gas 2 GS29-730

32

JAN14 Rev.1

NOTE: Check OD of OE rear shock body before ordering coil spring

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

JEEP

TYPE: Wrangler

DETAIL: 2.5L 4.0L

YEAR: 10/1996 - 2007

JEEP

MODEL: TJ 4 Cyl. Sport, 6 Cyl. Sahara

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (35mm Lift) With no Accessories 1 C29-006

(B)

Linear Rate Raised Height (35mm Lift) 40-80Kg Accessories (Bull Bar OR Winch) 1 C29-002

(B)

Linear Rate Raised Height (40mm Lift) 80-120Kg Accessories (Bull Bar and Winch) 1 C29-016

(B)

QTY

FRONT

QTY

JEEP-53

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (35mm Lift) 1 C29-007

(B)

SHOCK ABSORBER SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-721 Heavy Duty Twin Tube Gas 2 GS29-722 STEERING DAMPER UNDER BODY BUSH KIT

Kit Includes Front & Rear Under Body Bushes

Heavy Duty (Big Bore) Complete with Fittings 1 SD29-840 SD29-840 is supplied with two styles of mounting pin Dispose of the pin that is not required

UNDER BODY BUSH KIT

1 4 4 1 4 4

x x x x x x

Front Panhard Rod to Diff End Only Front Trailing Arm Upper Bush Front Trailing Arm Lower Bush Rear Panhard Rod Bush Rear Trailing Arm Upper Bush Rear Trailing Arm Lower Bush

1 PB29-1212K

See Rear Under Body Bush Kit

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14

33

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Wrangler

JEEP

MODEL: TJ

YEAR: 10/1996 - 2007

DETAIL: 2.5L 4 Cyl. Sport, 4.0L 6 Cyl. Sahara 75mm (3” Lift)

COIL SPRING

PART NUMBER

REAR

Price Code

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (3” Lift) 1 C29-048

QTY

FRONT

JEEP-60

QTY

JEEP

MAKE:

(if applicable)

Linear Rate Raised Height (3” Lift) 1 C29-049

(B)

SHOCK ABSORBER

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-425

Heavy Duty Twin Tube Gas 2 GS29-420

WARNING - 75MM (3”) LIFT

STEERING DAMPER

The suspension components listed on this page are for off-road use only … Refer to Local Laws before fitting to Registered/Road vehicles … An Engineering Certificate may be required … Handling characteristics will diminish on lifts above 50mm (2”)

Heavy Duty (Big Bore) Complete with Fittings 1 SD29-840 SD29-840 is supplied with two styles of mounting pin Dispose of the pin that is not required

34

JAN14

• • • •

The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted Adjustable Panhard Rods Modified Leading / Trailing Arms Brake Hoses Extended Bump Stops

• • •

Gear Box & Drive Line Modifications Steering Arms Swaybar Modification

Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page. These products do not come with any warranty or guarantee.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Wrangler

JEEP

YEAR: 2007 on

JEEP

MODEL: JK DETAIL: 2 Door, 4 Door

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

JEEP-58

PART NUMBER Price Code

(if applicable)

2 Door 3.8L V6 Linear Rate Raised Height (50mm Lift) 1 C29-074

Linear Rate Raised Height (60mm Lift) 1 C29-073

(B)

Linear Rate Raised Height (50mm Lift) 1 C29-075

(B)

Linear Rate Raised Height (50mm Lift) 200Kg Constant Load 1 C29-089

(B)

Linear Rate Raised Height (50mm Lift) 350Kg Constant Load 1 C29-091

(B)

(B)

4 Door 2.8L CRD Turbo Diesel Linear Rate Raised Height (50mm Lift) 1 C29-078 Linear Rate Raised Height (50mm Lift) 70Kg Accessories (Bull Bar OR Winch) 1 C29-088

(B)

(B)

STEERING DAMPER SHOCK ABSORBER

RH Drive Only Complete with Fittings 1 SD45-022S

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-728

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Twin Tube Gas 2 GS29-729

Raised Height measurements are listed as a guide only

JAN14

35

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Wrangler

JEEP

MODEL: JK

YEAR: 2007 on

DETAIL: 2 Door, 4 Door JEEP-65

FRONT COIL SPRING

QTY

100mm (4” Lift) PART NUMBER

REAR

Price Code

Linear Rate Raised Height (100mm Lift) 1 C29-086

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (100mm Lift) Soft Option 1 C29-098

QTY

JEEP

MAKE:

(if applicable)

(C)

Linear Rate Raised Height (100mm Lift) Soft Option 1 C29-099

(C)

(C)

Linear Rate Raised Height (100mm Lift) 1 C29-087

(C)

STEERING DAMPER

SHOCK ABSORBER

RH Drive Only Complete with Fittings 1 SD45-022S

Heavy Duty Twin Tube Gas 2 GS29-717

SHOCK ABSORBER

WARNING - 100MM (4”) LIFT The suspension components listed on this page are for off-road use only … Refer to Local Laws before fitting to Registered/Road vehicles … An Engineering Certificate may be required … Handling characteristics will diminish on lifts above 50mm (2”)

• • • •

The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted Adjustable Panhard Rods Modified Leading / Trailing Arms Brake Hoses Extended Bump Stops

• • •

Gear Box & Drive Line Modifications Steering Arms Swaybar Modification

Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.

Heavy Duty Twin Tube Gas 2 GS29-716

36

JAN14 Rev.1

These products do not come with any warranty or guarantee.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Commander

JEEP

YEAR: 2006 on

JEEP

MODEL: XH DETAIL: Petrol and Diesel

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (40mm Lift) 1 C21-020 Linear Rate Raised Height (40mm Lift) 80Kg Accessories (Bull Bar OR Winch) 1 C21-054

QTY

FRONT

QTY

JEEP-57

PART NUMBER Price Code

(if applicable)

(A)

Linear Rate Raised Height (40mm Lift) 1 C29-027

(B)

(B)

Linear Rate Raised Height (40mm Lift) 180Kg Constant Load 1 C29-029

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-726

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS29-727

Raised Height measurements are listed as a guide only

JAN14

37

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

KIA

TYPE:

Sportage

KIA-51

KIA-54

Kia Kia MODEL: YEAR:

FRONT

JA 04/1994 - 03/2002 2.0L

REAR

PART NUMBER Price Code

Sportage JA

MODEL: YEAR:

2000 - 03/2002 Long Body 5 Door

Linear Rate Raised Height (40mm Lift) 1 C31-002

(A)

Linear Rate Raised Height (70mm Lift) 1 C31-044

(A)

When fitting above part number, suspension changes are required

Spare wheel mounted inside vehicle

Linear Rate Raised Height (40mm Lift) 1 C31-033

(A)

Linear Rate Raised Height (70mm Lift) 1 C31-049

(A)

Price Code

REAR Sportage KM

(if applicable)

QTY

QTY

PART NUMBER

Linear Rate Raised Height (40mm Lift) 1 C31-062

(A)

When fitting above part number, suspension changes are required

PART NUMBER Price Code (if applicable)

COIL SPRING

COIL SPRING

JAN14 Rev.1

Spare wheel mounted on tailgate

Linear Rate Raised Height (40mm Lift) 1 C31-003

SWB & LWB 2.0L

38

(if applicable)

COIL SPRING

2 Door (Soft & Hard Top) and 04/1994 - 2000 Short Body 5 Door

Sportage KM

PART NUMBER Price Code

Sportage JA

(if applicable)

COIL SPRING

FRONT

KM 08/2005 - 04/2010 2.0L

QTY

MAKE:

QTY

KIA

4X4

(B)

Variable Rate Raised Height (40mm Lift) 1 C31-063V

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

(B)

Raised Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Sportage

KIA

YEAR: 04/2010 on

DETAIL: 2.0L Unleaded 2.4L Unleaded 2.0L Turbo Diesel

COIL SPRING

KIA-55

QTY

FRONT

KIA

MODEL: SL, SL Platinum

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

AWD

QTY

MAKE:

PART NUMBER Price Code

(if applicable)

AWD Linear Rate Raised Height (40mm Lift) 1 C25-096

Linear Rate Raised Height (40mm Lift) 1 C25-097

(B)

(B)

COIL SPRING

COIL SPRING

4x2

4x2 Linear Rate Raised Height (40mm Lift) 1 C31-076

(B)

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Linear Rate Raised Height (40mm Lift) 1 C31-077

Raised R Rai aised d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts are listed as a guide only

JAN14 Rev.1

(B)

39

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

KIA

MAKE:

KIA

TYPE: Sorrento

MODEL: BL

YEAR: 2003 - 2007

DETAIL:

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

KIA-52

PART NUMBER Price Code (if applicable)

3.5L V6 Petrol 3.0L Diesel Linear Rate Raised Height (35mm Lift) 1 C31-025

3.5L V6 Petrol 2.5L Diesel

(B)

SHOCK ABSORBER

Linear Rate Raised Height (35mm Lift) 1 C31-024

(B)

Heavy Duty Twin Tube Gas 2 GS33-635W

40

JAN14

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Sorrento

KIA

YEAR: 07/2007 to 2010

KIA

MODEL: BL (LX, EX) DETAIL:

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

KIA-53

COIL SPRING

(if applicable)

PART NUMBER Price Code

(if applicable)

Petrol & Diesel

Petrol Linear Rate Raised Height 1 C31-024

(B)

Linear Rate Raised Height 1 C31-027

(B)

Diesel Linear Rate Raised Height 1 C31-026

(B)

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14

41

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

LANDROVER

TYPE: Range Rover

MODEL:

Landrover

YEAR: 1971 - 1998

DETAIL: Coil Spring Suspension Not with Air Suspension

LAND-52

COIL SPRING

PART NUMBER

REAR

Price Code (if applicable)

QTY

FRONT

QTY

LANDROVER

4X4

PART NUMBER Price Code (if applicable)

COIL SPRING

Linear Rate Standard Height (20mm Lift) 1 C51-016

(B)

Linear Rate Standard Height (20mm Lift) 1 C51-017

(B)

Linear Rate Raised Height (45mm Lift) 1 C51-014

(B)

Linear Rate Raised Height (45mm Lift) 1 C51-015

(B)

Linear Rate Raised Height (45mm Lift) 150Kg Constant Load 1 C51-022

(B)

Linear Rate Raised Height (40mm Lift) Diesel Engine Up to 50Kg Accessories (Bull Bar OR Winch) 1 C51-018

(B)

SHOCK ABSORBER SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS51-116 STEERING DAMPER

Heavy Duty Twin Tube Gas 2 GS51-117 Heavy Duty (Big Bore) Complete with Fittings 1 SD51-811

UNDER BODY BUSH KIT

UNDER BODY BUSH KIT Kit Includes Front & Rear Under Body Bushes

See Rear Under Body Bush Kit

CASTOR KIT

Front Radius Arm Castor Kit (±2°) 4 x Eccentric Polyurethane Bushes Pre 1986 Suits 38mm wide leading arm 1 PB51-501K After 1986 Suits 44mm wide leading arm 1 PB51-502K Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required. DO NOT fit to automatic models as vibration may occur.

42

JAN14

Non EFI, Pre 01/1986 4 x Front Radius Arm to Chassis Bush 4 x Front Radius Arm to Diff Bush 2 x Front Panhard Rod Bush 2 x Rear Upper Arm to Chassis Bush 2 x Rear Lower Arm to Diff Bush 4 x Rear Lower Arm to Chassis Bush

1 PB51-1242K

With EFI, 02/1986 on 4 x Front Radius Arm to Chassis Bush 4 x Front Radius Arm to Diff Bush 2 x Front Panhard Rod Bush 2 x Rear Upper Arm to Chassis Bush 2 x Rear Lower Arm to Diff Bush 4 x Rear Lower Arm to Chassis Bush

1 PB51-1243K

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Discovery

LANDROVER

MODEL: Series I

LANDROVER

MAKE:

YEAR: 1991 - 03/1999

DETAIL:

COIL SPRING

PART NUMBER

REAR

Price Code (if applicable)

COIL SPRING

Linear Rate Standard Height (20mm Lift) 1 C51-016

(B)

Linear Rate Raised Height (45mm Lift) 1 C51-014

(B)

Linear Rate Raised Height (40mm Lift) Diesel Engine Up to 50Kg Accessories (Bull Bar OR Winch) 1 C51-018

QTY

FRONT

QTY

LAND-55

PART NUMBER Price Code

(if applicable)

Variable Rate Standard Height (20mm Lift) 1 C51-023V

(B)

SHOCK ABSORBER

(B)

Linear Rate Raised Height (35mm Lift) 1 C51-015

(B)

Linear Rate Raised Height (50mm Lift) 1 C51-022

(B)

Variable Rate Raised Height (50mm Lift) Extra Heavy Duty 220Kg Constant Load 1 C51-027V

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS51-116 STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD51-811 UNDER BODY BUSH KIT

Heavy Duty Twin Tube Gas 2 GS51-117

See Rear Under Body Bush Kit

UNDER BODY BUSH KIT

CASTOR KIT

Front Radius Arm Castor Kit (±2°) 4 x Eccentric Polyurethane Bushes Kit Includes Front & Rear Under Body Bushes

Suits 44mm wide leading arm 1 PB51-502K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

4 4 2 2 2 4

x x x x x x

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front Panhard Rod Bush Rear Upper Arm to Chassis Bush Rear Lower Arm to Diff Bush Rear Lower Arm to Chassis Bush

1 PB51-1243K

DO NOT fit to automatic models as vibration may occur.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14

43

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

LANDROVER

TYPE: Discovery II

MODEL: Series II

YEAR: 03/1999 - 2004

DETAIL: TD5

FRONT

PART NUMBER

REAR

Price Code COIL SPRING

Linear Rate Raised Height (45mm Lift) Up to 40Kg Accessories (Bull Bar OR Winch) Recommended 1 C51-042 Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 40-100Kg Accessories (Bull Bar and Winch) 1 C51-052

PART NUMBER Price Code

(if applicable)

Linear Rate Standard Height (20mm Lift) 1 C51-032

QTY

LAND-58

QTY

LANDROVER

4X4

COIL SPRING

(B)

(B)

(B)

(if applicable)

Variable Rate Standard Height (20mm Lift) 1 C51-023V

(B)

Linear Rate Raised Height (45mm Lift) 1 C51-015

(B)

Linear Rate Raised Height (50mm Lift) 1 C51-022

(B)

Variable Rate Raised Height (50mm Lift) 200Kg Constant Load 1 C51-027V

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS51-118

STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD51-802 Heavy Duty Twin Tube Gas 2 GS51-119

44

JAN14

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Discovery III

LANDROVER

MODEL: LR3

LANDROVER

MAKE:

YEAR: 01/2005 - 2009

DETAIL: 2.7L V6 TD, 4.0L V6 Petrol Coil Spring Models Only

PART NUMBER

REAR

Price Code COIL SPRING

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (45mm Lift) 1 C51-066

QTY

FRONT

QTY

LAND-59

COIL SPRING

(if applicable)

Linear Rate Raised Height (45mm Lift) 1 C51-067

(C)

Linear Rate Raised Height (45mm Lift) 200Kg Constant Load 1 C51-079

(C)

Linear Rate Raised Height (45mm Lift) 400Kg Constant Load 1 C51-065

(C)

(C)

SHOCK ABSORBER SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS51-120

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Twin Tube Gas 2 GS51-121

Raised Height measurements are listed as a guide only

JAN14

45

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

LANDROVER

TYPE: Defender

MODEL: 90 Series

YEAR: 1984 - 1990

DETAIL: SWB LAND-54

PART NUMBER

REAR

QTY

FRONT

QTY

LANDROVER

4X4

Price Code COIL SPRING

PART NUMBER Price Code

(if applicable)

(if applicable)

COIL SPRING

Petrol Linear Rate Raised Height (40mm Lift) 1 C51-014 Linear Rate Raised Height (45mm Lift) 50-80Kg Accessories (Bull Bar and Winch) 1 C51-018

(B)

(B)

Variable Rate Raised Height (50mm Lift) 220Kg Constant Load 1 C51-027V

(B)

(B)

Diesel Linear Rate Raised Height (45mm Lift) Up to 80Kg Accessories (Bull Bar OR Winch) 1 C51-018

Linear Rate Raised Height (45mm Lift) 1 C51-015

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS51-116 STEERING DAMPER

Heavy Duty Twin Tube Gas 2 GS51-117 Heavy Duty (Big Bore) Complete with Fittings 1 SD51-832

UNDER BODY BUSH KIT

UNDER BODY BUSH KIT

Kit Includes Front & Rear Under Body Bushes

See Rear Under Body Bush Kit

CASTOR KIT

Front Radius Arm Castor Kit (±2°)

Chassis Number up to LA930455 4 x Front Radius Arm to Chassis Bush 4 x Front Radius Arm to Diff Bush 2 x Front Panhard Rod Bush 2 x Rear Upper Arm to Chassis Bush 2 x Rear Lower Arm to Diff Bush 4 x Rear Lower Arm to Chassis Bush

1 PB51-1244K

Chassis number LA930456 on 4 x Front Radius Arm to Chassis Bush 4 x Front Radius Arm to Diff Bush 2 x Front Panhard Rod Bush 2 x Rear Upper Arm to Chassis Bush 2 x Rear Lower Arm to Diff Bush 4 x Rear Lower Arm to Chassis Bush

1 PB51-1243K

4 x Eccentric Polyurethane Bushes Pre 1986 Suits 38mm wide leading arm 1 PB51-501K After 1986 Suits 44mm wide leading arm 1 PB51-502K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

46

JAN14

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Defender

LANDROVER

MODEL: 110 Series

LANDROVER

MAKE:

YEAR: 1984 - 1992

DETAIL: Pickup, 110 County Wagon, Trayback

COIL SPRING

Suits:

PART NUMBER Price Code

110 V8 Petrol 2.5L Diesel Linear Rate Raised Height (40mm Lift) 1 C51-017

110 Isuzu Diesel

COIL SPRING

(if applicable)

Linear Rate Raised Height (40mm Lift) 80-100Kg Accessories (Bull Bar and Winch) 1 C51-015 Suits:

REAR

Suits: (B)

(B)

Suits:

(Pickup)

Linear Rate Raised Height (30mm Lift) 1 C51-015

(B)

Linear Rate Raised Height (40mm Lift) 80-100Kg Accessories (Bull Bar and Winch) 1 C51-022

(B)

SHOCK ABSORBER

QTY

FRONT

QTY

LAND-53

PART NUMBER Price Code

(if applicable)

110 Wagon & Pickup with Self Levelling Suspension Linear Rate Raised Height (30mm Lift) 1 C51-001

(B)

110 Wagon & Pickup without Self Levelling Suspension Linear Rate Raised Height (45mm Lift) Up to 250Kg Constant Load 1 C51-019

(B)

Linear Rate Raised Height (45mm Lift) 350Kg Constant Load 1 C51-011

(C)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS51-116 STEERING DAMPER

Heavy Duty Twin Tube Gas 2 GS51-117

Heavy Duty (Big Bore) Complete with Fittings 1 SD51-832

UNDER BODY BUSH KIT

UNDER BODY BUSH KIT

Kit Includes Front & Rear Under Body Bushes See Rear Under Body Bush Kit

CASTOR KIT

Front Radius Arm Castor Kit (±2°) 4 x Eccentric Polyurethane Bushes Isuzu Diesel Engine Suits 38mm wide leading arm 1 PB51-501K Petrol Only Suits 38mm wide leading arm 1 PB51-501K Suits 44mm wide leading arm 1 PB51-502K Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

Chassis Number up to LA930434 4 x Front Radius Arm to Chassis Bush 4 x Front Radius Arm to Diff Bush 2 x Front Panhard Rod Bush 2 x Rear Upper Arm to Chassis Bush 2 x Rear Lower Arm to Diff Bush 4 x Rear Lower Arm to Chassis Bush

1 PB51-1244K

Chassis number LA930435 on 4 x Front Radius Arm to Chassis Bush 4 x Front Radius Arm to Diff Bush 2 x Front Panhard Rod Bush 2 x Rear Upper Arm to Chassis Bush 2 x Rear Lower Arm to Diff Bush 4 x Rear Lower Arm to Chassis Bush

1 PB51-1243K

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14

47

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

LANDROVER

TYPE: Defender

MODEL: 110 & 130 Series

YEAR: 1992 - 2001

DETAIL: LWB 110” Wheel Base 300 TDi 130” Wheel Base Double Cab LAND-56

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

LANDROVER

4X4

Price Code

COIL SPRING

(if applicable)

Suits:

110 Series 130 Series

(if applicable)

Suits: Linear Rate Standard Height 1 C51-020

(B)

Linear Rate Raised Height (30mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C51-018

(B)

Linear Rate Raised Height (45mm Lift) 80-120Kg Accessories (Bull Bar and Winch) 1 C51-026

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS51-116 STEERING DAMPER

PART NUMBER

110 Series Linear Rate Standard Height 1 C51-051

(B)

Linear Rate Raised Height (45mm Lift) Up to 250Kg Constant Load 1 C51-019

(B)

Linear Rate Raised Height (45mm Lift) Up to 350Kg Constant Load 1 C51-011

(C)

Linear Rate Raised Height (50mm Lift) 500Kg Constant Load 1 C51-059T

(B)

Suits:

(C)

130 Series Linear Rate Raised Height (45mm Lift) 1 C51-009T

(C)

Linear Rate Raised Height (45mm Lift) 500Kg Constant Load 1 C51-059T

(C)

Replace inner coil helper for maximum load carrying capacity

SHOCK ABSORBER

Heavy Duty (Big Bore) Complete with Fittings 1 SD51-832 UNDER BODY BUSH KIT

See Rear Under Body Bush Kit

CASTOR KIT

Heavy Duty Twin Tube Gas 2 GS51-117 UNDER BODY BUSH KIT

Front Radius Arm Castor Kit (±2°) 4 x Eccentric Polyurethane Bushes 110 Series

Kit Includes Front & Rear Under Body Bushes

Suits 38mm wide leading arm 1 PB51-501K Suits 44mm wide leading arm 1 PB51-502K

130 Series Suits 44mm wide leading arm 1 PB51-502K Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

48

JAN14

Chassis number LA930435 on 4 x Front Radius Arm to Chassis Bush 4 x Front Radius Arm to Diff Bush 2 x Front Panhard Rod Bush 2 x Rear Upper Arm to Chassis Bush 2 x Rear Lower Arm to Diff Bush 4 x Rear Lower Arm to Chassis Bush

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

1 PB51-1243K

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Defender

LANDROVER

MODEL: 110 & 130

LANDROVER

MAKE:

YEAR: 2007 on

DETAIL: TD4 2.4L T/Diesel

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

LAND-62

PART NUMBER Price Code

(if applicable)

COIL SPRING

Suits:

Linear Rate Standard Height 1 C51-020 Linear Rate Raised Height (40mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C51-018 Linear Rate Raised Height (50mm Lift) 50-80Kg Accessories (Bull Bar OR Winch) 1 C51-017 Linear Rate Raised Height (50mm Lift) 80-120 Kg Accessories (Bull Bar and Winch) 1 C51-026

(B)

(B)

(B)

110 Series Linear Rate Standard Height 1 C51-051

(B)

Linear Rate Raised Height (45mm Lift) Up to 250Kg Constant Load 1 C51-019

(B)

Linear Rate Raised Height (45mm Lift) Up to 350Kg Constant Load 1 C51-011

(C)

Linear Rate Raised Height (50mm Lift) 500Kg Constant Load 1 C51-059T Suits:

(B)

STEERING DAMPER

(C)

130 Series Linear Rate Raised Height (45mm Lift) 1 C51-009T

(C)

Linear Rate Raised Height (45mm Lift) 500Kg Constant Load 1 C51-059T

(C)

Replace inner coil helper for maximum load carrying capacity

SHOCK ABSORBER

Heavy Duty (Big Bore) Complete with Fittings 1 SD51-832 SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS51-117 UNDER BODY BUSH KIT

Heavy Duty Twin Tube Gas 2 GS51-116

UNDER BODY BUSH KIT

See Rear Under Body Bush Kit

Kit Includes Front & Rear Under Body Bushes

Chassis number LA930435 on 4 x Front Radius Arm to Chassis Bush 4 x Front Radius Arm to Diff Bush 2 x Front Panhard Rod Bush 2 x Rear Upper Arm to Chassis Bush 2 x Rear Lower Arm to Diff Bush 4 x Rear Lower Arm to Chassis Bush

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

1 PB51-1243K

JAN14

49

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Bravo

MAZDA

Mazda

MODEL: B2200, B2500, B2600, YEAR: 03/1987 - 11/2006 B4000 4.0L V6 DETAIL: Pickup, Ford Raider / Courier, Proceed Suspension Fits 4x2 Highrider MAZ-51 and 4x4 B4000 V6 PART NUMBER

REAR

QTY

FRONT

QTY

MAZDA

MAKE:

Price Code TORSION BAR

(if applicable)

PART NUMBER Price Code (if applicable)

LEAF SPRING Two Stage

5+2 Leaves Raised Height (35mm Lift) Up to 100Kg Constant Load 2 MAZ-003-R 6+2 Leaves Heavy Duty Raised Height (35mm Lift) 200Kg Constant Load 2 B2600-4X4-R

SHACKLE BUSH KIT

Heavy Duty Rate Increased Length 926mm 1 TB39-1546

Kit Contains: 2 x SPF311 4 x SPF502 4 x SPF753 1 PB39-1058K

SHOCK ABSORBER U-BOLT KIT

Kit Contains: 2 x UB59-453-3 2 UB59-453-3K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS19-081T SHACKLE KIT

Heavy Duty Twin Tube Gas 2 GS19-082P

50

JAN14 Rev.1

Greasable: Fit in Pairs 2 SK59-010

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

MAZDA

TYPE: BT-50 (Series I)

MAZDA

PART NUMBER

REAR

QTY

FRONT

QTY

MODEL: BT-50 YEAR: 2007 - 10/2011 Highrider 3.0L TD DETAIL: Pickup / Dual Cab Ford Ranger PJ MAZ-53 Suspension Fits 4x4 & 4x2 Highrider

Price Code TORSION BAR

(if applicable)

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

3+2 Leaves Medium Duty Raised Height (40mm Lift) Up to 100Kg Constant Load 2 L39-030-R

Heavy Duty Rate Increased Length 1024mm x 27mm 1 TB39-1551

NOTE: for Latin American models check the OE Torsion Bar length before ordering, as there are some models with a 926mm long Torsion Bar

Heavy Duty Rate Increased Length 926mm 1 TB39-1546

4+2 Leaves Heavy Duty Raised Height (45mm Lift) 280Kg Constant Load 2 L39-031-R 5+2 Leaves Super Heavy Duty Raised Height (40mm Lift) 420Kg Constant Load 2 L39-032-R

SHACKLE BUSH KIT

Kit Contains: 2 x PB59-1503 4 x SPF502 4 x SPF753 1 PB39-1056K

SHOCK ABSORBER

U-BOLT KIT

Kit Contains: 2 x UB21-466 2 UB21-466K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS19-081T SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-010 PIN KIT

Heavy Duty Twin Tube Gas 2 GS19-082P

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-060

Raised Height measurements are listed as a guide only

JAN14 Rev.3

51

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAZDA

TYPE: BT-50 (Series II) YEAR: 10/2011 on

DETAIL: 3.2L Pickup / Style Side / Well Back / Tray Back Also Suits 4x2 Highrider

FRONT COIL SPRING

MAZ-54

PART NUMBER

REAR

Price Code

QTY

MODEL: BT-50

QTY

MAZDA

MAKE:

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two o Stage

3+3 Leaves Medium Duty Raised Height (40mm Lift) Up to 100Kg Constant Load 2 L19-131-R

XT Pickup (Dual Cab) XTR Pickup (Extra Cab) 4x2 High Rider Linear Rate Raised Height (40mm Lift) No Accesories 1 C19-420 Linear Rate Raised Height (40mm Lift) 50-90Kg Accesories 1 C19-422

(B)

(B)

4+3 Leaves Heavy Duty Raised Height (40mm Lift) 280Kg Constant Load (Recommended) 2 L19-132-R 5+3 Leaves Super Heavy Duty Raised Height (40mm Lift) 500Kg Constant Load 2 L19-133-R TAILSHAFT SPACER KIT

XT Trayback, (Single Cab, Extra Cab & Dual Cab) XTR & GT Pickup (Dual Cab) Linear Rate Raised Height (40mm Lift) No Accesories 1 C19-422

(B)

Linear Rate Raised Height (40mm Lift) 50-90Kg Accesories 1 C19-424

(B)

Tailshaft Centre Bearing Spacer Kit

Helps to reduce Driveline Vibration in Lifted Vehicles

1 WA19-526K

SHACKLE BUSH KIT

Kit Contains: 2 x PB19-1523 4 x PB19-1524 4 x PB19-1525 1 PB19-1104K U-BOLT KIT

Kit Contains: 2 x UB21-466 2 UB21-466K

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS19-081T Heavy Duty Twin Tube Gas 2 GS19-092

STRUT CAP

SHACKLE KIT

Greasable: Fit in Pairs 2 SK19-058 PIN KIT

2 SC19-009

52

JAN14 Rev.3

Greasable: Fit in Pairs 2 SP59-060

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

MERCEDES

TYPE: G-Class

MERCEDES

MODEL: G230, G300

Mercedes

YEAR: 1982 - 2001

DETAIL: G230: 2.3L & 2.8L Petrol G300: 3.0L Turbo Diesel

COIL SPRING

PART NUMBER

REAR

Price Code (if applicable)

Linear Rate Raised Height (45mm Lift) 1 C41-042

COIL SPRING

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-125B

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

QTY

FRONT

QTY

MER-49

PART NUMBER Price Code

(if applicable)

Variable Rate Raised Height (45mm Lift) Comfort Spring 1 C43-045VE

(B)

Variable Rate Raised Height (45mm Lift) Extra Heavy Duty 250Kg Constant Load 1 C41-055V

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-784D

Raised Height measurements are listed as a guide only

JAN14

53

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

MERCEDES

MAKE:

MERCEDES

TYPE:

MODEL: G55

YEAR: 2005 on

DETAIL: 4 Door Station Wagon

COIL SPRING

PART NUMBER Price Code (if applicable)

Linear Rate Raised Height (45mm Lift) 1 C41-060

Linear Rate Raised Height (75mm Lift) 1 C41-062

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS51-117S

54

JAN14

REAR COIL SPRING

(B)

(B)

QTY

FRONT

QTY

MER-50

PART NUMBER Price Code (if applicable)

Variable Rate Raised Height (45mm Lift) Comfort Spring 1 C43-045VE

(B)

Variable Rate Raised Height (45mm Lift) Extra Heavy Duty 250Kg Constant Load 1 C41-055V

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-784D

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

MERCEDES

TYPE: G-Wagon

MERCEDES

MODEL: G550

YEAR: 2005 on

DETAIL: 5.6L V8

COIL SPRING

PART NUMBER

REAR

Price Code (if applicable)

Linear Rate Raised Height (45mm Lift) 1 C41-048

COIL SPRING

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-125B

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

QTY

FRONT

QTY

MER-51

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (50mm Lift) 1 C41-055V

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-784D

Raised Height measurements are listed as a guide only

JAN14

55

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MITSUBISHI

MAKE:

TYPE: Triton

Mitsubishi

MODEL: ME, MF, MG, MH, MJ, MK YEAR: 1987 - 09/2006 DETAIL: Pickup, Colt Rodeo (South Africa), Mighty Max , L200 (PNG) MITS-52

TORSION BAR

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

MITSUBISHI

4X4

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

3+2 Leaves Raised Height (35mm Lift) 2 TRIT-3+2-R Up to 100Kg Constant Load 4+2 Leaves Raised Height (40mm Lift) 300Kg Constant Load 2 TRIT-003-R Suits:

Petrol & Diesel (pre 1992) Heavy Duty Rate Increased Length 1282mm 1 TB43-200 Check length before ordering

Suits:

V6 Petrol (06/1991 - 2000) Turbo Diesel (1992 on) Diesel (1997 - 2000) Heavy Duty Rate Increased Length 1370mm 1 TB43-204 Check length before ordering

Above springs have a 36mm front spring eye. For bush kit use PB43-1075K

SHACKLE BUSH KIT

Check Eye ID before ordering

Suits:

36mm Front Spring Eye

Suits:

Kit Contains: 2 x SPF713 4 x SPF187 4 x SPF192 1 PB43-1075K 41mm Front Spring Eye

The Most Common (K33, 34, 36 etc...)

(36mm ID)

(K76, 77 - Dual Cabs)

(41mm ID)

U-BOLT KIT

SHOCK ABSORBER

1987 - 11/1996 Heavy Duty Twin Tube Gas 2 GS43-082 11/1996 on

Kit Contains: 2 x PB43-1508 4 x SPF187 4 x SPF192 1 PB43-1085K

72mm Dia.

(Pre 02/2005)

77mm Dia.

(MK 02/2005 on)

Kit Contains: 2 x UB43-671 2 UB43-671K Kit Contains: 2 x UB45-451 2 UB45-451K

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-082S

STEERING DAMPER

Heavy Duty Twin Tube Gas 2 GS43-081B SHACKLE KIT

Heavy Duty Complete with Fittings 1 SD45-022

56

JAN14

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SK43-037

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

MITSUBISHI

TYPE: Triton, L200

MITSUBISHI

MODEL: ML, MN

YEAR: 05/2006 on

DETAIL: Warrior 4x2 Highrider

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

MITS-59

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

After fitting these springs, we recommend adjusting the Brake Proportioning Valve

3+2 Leaves Raised Height (40mm Lift) Comfort Spring 2 L43-014-R

4x2 Highrider 4x4 MN 2.5 T/D Single Cab only Linear Rate Raised Height (40mm Lift) Up to 70Kg Accessories 1 C43-186

(B)

Linear Rate Raised Height (45mm Lift) 70-120Kg Accessories (Bullbar AND Winch) 1 C43-192

(B)

4x4 ML 3.5 V6 Petrol 4x4 MN 2.5 T/D Dual Cab

4+2 Leaves Raised Height (45mm Lift) Medium Duty 100Kg Constant Load 2 L43-015-R 5+2 Leaves Raised Height (45mm Lift) Heavy Duty 350Kg Constant Load 2 L43-016-R

GL/GLX/GLX-R

Linear Rate Raised Height (40mm Lift) Up to 70Kg Accessories 1 C43-192 Linear Rate Raised Height (45mm Lift) 70-120Kg Accessories (Bullbar AND Winch) 1 C43-188

6+2 Leaves Raised Height (45mm Lift) Extra Heavy Duty 550Kg Constant Load 2 L43-017-R

(B)

SHACKLE BUSH KIT

Kit Contains: 2 x PB43-1508 4 x SPF187 4 x SPF192 1 PB43-1085K

(B)

U-BOLT KIT

4x4 ML 3.2 T/D Linear Rate Raised Height (40mm Lift) Up to 70Kg Accessories 1 C43-188 Linear Rate Raised Height (45mm Lift) 70-120Kg Accessories (Bullbar AND Winch) 1 C43-190 Due to vastly different OE ride heights a lift of only 20mm may be possible in some models

(B)

05/2006 - 04/2013

Kit Contains: 2 x UB43-701 2 UB43-701K

04/2013 on

Kit Contains: 2 x UB45-800 2 UB45-800K

SHOCK ABSORBER (B)

Heavy Duty Twin Tube Gas 2 GS43-801 Heavy Duty Long Travel Twin Tube Gas (Big Bore) 2 GS59-651

SHOCK ABSORBER SHACKLE KIT

Greasable: Fit in Pairs 2 SK43-037 PIN KIT

Heavy Duty Twin Tube Gas 2 GS43-800

Greasable: Fit in Pairs 2 SP59-060

STRUT CAP

TAILSHAFT SPACER

2 SC43-005

When fitting raised suspension a Tailshaft Spacer is required to align the Centre Bearing and prolong life in models with a 2-piece Tailshaft 1 S43-001

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14 Rev.3

57

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

TYPE: Challenger

MITSUBISHI

MODEL: PA

YEAR: 06/2000 - 2006

DETAIL: 2.8L TD, 3.0L V6 Nativa

FRONT TORSION BAR

PART NUMBER Price Code (if applicable)

REAR COIL SPRING

QTY

MITS-57

QTY

MITSUBISHI

4X4

PART NUMBER Price Code (if applicable)

Variable Rate Raised Height (20mm Lift) 1 C43-065V

(B)

Variable Rate Raised Height (30mm Lift) 200Kg Constant Load 1 C43-043V

(B)

Heavy Duty Rate Increased Length 1307mm 1 TB43-203 SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-082S

58

JAN14

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-785

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

MITSUBISHI

TYPE: Challenger (Australia)

MITSUBISHI

MODEL:

YEAR: 2008 on

DETAIL: Montero Sport (South America), Nativa, Pajero Sport (Thailand, USA)

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

4x2 Variants 4x4 3.5 V6, 3.0 V6, 2.4 I4 Petrol 4x4 2.5 T/D Linear Rate Raised Height (40mm Lift) Up to 70Kg Accessories 1 C43-192 Linear Rate Raised Height (45mm Lift) 70-120Kg Accessories (Bullbar AND Winch) 1 C43-188

(B)

(B)

4x4 3.2 T/D Linear Rate Raised Height (40mm Lift) Up to 70Kg Accessories 1 C43-188

(B)

Linear Rate Raised Height (45mm Lift) 70-120Kg Accessories (Bullbar AND Winch) 1 C43-190

(B)

Due to vastly different OE ride heights a lift of only 20mm may be possible in some models

QTY

FRONT

QTY

MITS-61

PART NUMBER Price Code

(if applicable)

Linear Rate Standard Height 1 C43-099

(B)

Linear Rate Raised Height (20mm Lift) 1 C43-097

(B)

Variable Rate Raised Height (35mm Lift) 1 C43-043V

(B)

Linear Rate Raised Height (40mm Lift) 1 C43-203

(B)

Variable Rate Raised Height (40mm Lift) 125Kg Constant Load 1 C43-045V

(B)

Linear Rate Raised Height (40mm Lift) 250Kg Constant Load 1 C43-165

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-800

STRUT CAP

2 SC43-005

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Twin Tube Gas 2 GS43-785

Raised Height measurements are listed as a guide only

JAN14 Rev.2

59

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

TYPE: Pajero

MITSUBISHI

MODEL: NA - NF, NH, NJ, NK

YEAR: 1983 - 2000 Pre 1991 (NA - NF)

DETAIL: SWB & LWB Rear Leaf Spring Suspension MITS-54

TORSION BAR

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

MITSUBISHI

4X4

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

Suits:

SWB 3+1 Leaves Raised Height (40mm Lift) Up to 100Kg Constant Load 2 PAJ-3+1-R

Suits: Suits:

NA - NF 4 Cyl. NH, NJ 4 Cyl. NF - NG V6 LWB

(1983 - 1991) (1991 on)

LWB 4+1 Leaves Raised Height (40mm Lift) Up to 100Kg Constant Load 2 PAJ-4+1-R

(1988 - 1991) (05/1991 - 2000)

SHACKLE BUSH KIT

Heavy Duty Rate Increased Length 1282mm 1 TB43-200 Check length before ordering

Suits:

Kit Contains: 4 x SPF244 4 x SPF187 4 x SPF192 1 PB43-1015K

V6 & T/Dsi (1995 - 2000) Heavy Duty Rate Increased Length 1307mm 1 TB43-203

U-BOLT KIT

Check length before ordering

SHOCK ABSORBER

Kit Contains: 2 x UB43-671 2 UB43-671K SHOCK ABSORBER

Pre 06/1991 07/1991 on

Heavy Duty Twin Tube Gas 2 GS43-082 Heavy Duty Twin Tube Gas 2 GS43-082S

Heavy Duty Twin Tube Gas 2 GS59-636 SHACKLE KIT

Greasable: Fit in Pairs 2 SK43-037

STEERING DAMPER PIN KIT

Pre 06-1991

60

JAN14

Heavy Duty Complete with Fittings 1 SD43-017 Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Fit in Pairs 2 SP43-038

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

MITSUBISHI

TYPE: Pajero

MITSUBISHI

TORSION BAR

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Suits:

Suits: Suits:

V6 SWB & LWB

(05/1991 - 1996)

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (25mm Lift) 1 C43-097

(B)

Variable Rate Raised Height (25mm Lift) 1 C43-063V

(B)

LWB

Linear Rate Raised Height (35mm Lift) Up to 100Kg Constant Load (Recommended) 1 C43-101 Variable Rate Raised Height (30mm Lift) Up to 100Kg Constant Load 1 C43-043V

Heavy Duty Rate Increased Length 1282mm 1 TB43-200 Check length before ordering

Suits:

SWB

QTY

FRONT

QTY

MODEL: NA - NF, NH, NJ, NK YEAR: 05/1988 - 2000 NL Pre 1991 (NA - NF) DETAIL: SWB & LWB Shogun, Montero Rear Coil Spring Suspension MITS-53

V6 & T/Dsi NF - NL (1995 on)

(B)

(B)

Variable Rate Raised Height (30mm Lift) Extra Heavy Duty Option 125Kg Constant Load 1 C43-045V

(B)

Linear Rate Raised Height (40mm Lift) Extra Heavy Duty Option 250Kg Constant Load 1 C43-165

(B)

SHOCK ABSORBER

Heavy Duty Rate Increased Length 1307mm 1 TB43-203 Check length before ordering

NA - NF (pre 05/1991) Heavy Duty Twin Tube Gas 2 GS43-785

SHOCK ABSORBER

NH, NJ, NK, NL (05/1991 - 2000) Heavy Duty Twin Tube Gas 2 GS43-781 OR Heavy Duty Twin Tube Gas Big Bore 2 GS43-788 UNDER BODY BUSH KIT

NA - NF (pre 05/1991) Heavy Duty Twin Tube Gas 2 GS43-082 NH, NJ, NK, NL (05/1991 - 2000) Heavy Duty Twin Tube Gas 2 GS43-082S

STEERING DAMPER

Kit Includes Rear Bushes Only 4 x Radius Arm to Diff Mount Bush 2 x Panhard Rod Bush 2 x Swaybar Link Bush Kit contains extra trailing arm bushes to suit two styles of trailing arms

4 x Trailing Arm to Chassis Bush Heavy Duty Complete with Fittings 1 SD43-017

(Suits pressed steel bracket with bushes) OR

4 x Trailing Arm to Chassis Bush (Suits cast steel bracket without washers)

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

1 PB43-1226K

JAN14 Rev.1

61

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

TYPE: Pajero V7

MITSUBISHI

MODEL: NM,NP (3.5L V6 & 3.2L Tdi), YEAR: 2000 on NS,NT, NW (3.8L V6 & 3.2L Tdi) DETAIL: SWB & LWB V78 Station Wagon MITS-56

COIL SPRING

Suits:

PART NUMBER Price Code

SWB & LWB

Suits:

NM - NP 3.5L V6 NS - NW 3.8L V6

Linear Rate Raised Height (45mm Lift) No Accessories Recommended 1 C43-124 Linear Rate Raised Height (45mm Lift) Extra Heavy Duty Up to 100Kg Accessories (Bull Bar and Winch) 1 C43-126

(B)

(B)

SWB & LWB

NM - NW 3.2L Tdi

Linear Rate Raised Height (40mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C43-126

(B)

Linear Rate Raised Height (40mm Lift) 50-110Kg Accessories (Bull Bar and Winch) 1 C43-144

(B)

We recommend a wheel alignment be carried out after fitting springs

SHOCK ABSORBER

(if applicable)

SWB

Linear Rate Standard Height (10mm Lift) 1 C43-123

(B)

Linear Rate Raised Height (45mm Lift) Up to 100Kg Constant Load Recommended 1 C43-191

(B)

Linear Rate Raised Height (50mm Lift) 200Kg Constant Load 1 C43-125

(B)

Suits:

(B)

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Standard Height (10mm Lift) 1 C43-122

Suits:

REAR

QTY

FRONT

QTY

MITSUBISHI

4X4

LWB

Linear Rate Standard Height (10mm Lift) 1 C43-189

(B)

Linear Rate Raised Height (50mm Lift) Up to 100Kg Constant Load Recommended 1 C43-125

(B)

Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 180Kg Constant Load 1 C43-193

(C)

Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 250Kg Constant Load 1 C43-195

(C)

Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 400Kg Constant Load 1 C43-197

(C)

We recommend a wheel alignment be carried out after fitting springs

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS43-783 Heavy Duty Twin Tube Gas 2 GS43-784 UNDER BODY BUSH KIT

UNDER BODY BUSH KIT

Kit Includes Front & Rear Under Body Bushes See Rear Under Body Bush Kit

STRUT CAP

2 SC43-008

62

JAN14

4 x Front Control Arm Lower Inner 4 x Front Control Arm Upper Inner 4 x Rear Control Arm Lower Inner & Outer 4 x Rear Control Arm Upper Inner 2 x Rear Toe Control Arm Inner 2 x Rear Trailing Arm Lower Rear 2 x Rear Trailing Arm Lower Front

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

1 PB43-1262K

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

MITSUBISHI

TYPE: L400 Spacegear, Delica

DETAIL: 4x4

Series Series Series Series

I II III IV

MITSUBISHI

MODEL: MV - P Series

YEAR: 05/1994 - 03/2007 05/1994 06/1997 06/1999 06/2002

-

05/1997 05/1999 05/2002 03/2007

TORSION BAR

05/1994 - 05/1999

06/1999 - 03/2007

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

MITS-60

Price Code

COIL SPRING

(if applicable)

Heavy Duty Rate Increased Length 1165mm 1 TB43-031

Heavy Duty Rate Increased Length 1065mm 1 TB43-032

PART NUMBER (if applicable)

Linear Rate Standard Height 1 C43-111

(B)

Linear Rate Raised Height (40mm Lift) 1 C43-109

(B)

Linear Rate Raised Height (50mm Lift) 1 C43-163

(B)

SHOCK ABSORBER We recommend a visual inspection to verify the type of shock absorber prior to ordering

SHOCK ABSORBER

Suits Non-ECS Suspension

Eye

Eye Heavy Duty Twin Tube Gas 2 GS43-081B Suits ECS Suspension

Pin

Eye Heavy Duty Twin Tube Gas 2 GS21-637S

ADJUSTABLE PANHARD RODS

Heavy Duty Twin Tube Gas 2 GS43-082S

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Complete with Bushes 1 PR43-1417

Raised Height measurements are listed as a guide only

JAN14

63

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

MITSUBISHI

MODEL: D5

YEAR: 2007 on

DETAIL: 2.4L Petrol Van

COIL SPRING

JAN14

PART NUMBER

REAR

Price Code (if applicable)

COIL SPRING

QTY

MITS-64

FRONT

64

TYPE: Delica

QTY

MITSUBISHI

4X4

PART NUMBER Price Code (if applicable)

Linear Rate Standard Height 2 C43-270

(B)

Linear Rate Standard Height 2 C43-271

(B)

Linear Rate Raised Height (40mm Lift) 2 C43-272

(B)

Linear Rate Raised Height (40mm Lift) 2 C43-273

(B)

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts Raised are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MITSUBISHI

TYPE:

Pajero iO Outlander

MITS-55

MITS-58

MODEL: Pajero iO YEAR: 03/1999 to 07/2003

MODEL: YEAR:

(Pinin) (Airtrek)

LWB: 1.8L & 2.0L

Suits:

Suits:

Linear Rate Standard Height 1 C43-120

(B)

Linear Rate Raised Height (28mm Lift) 1 C43-114

(B)

Linear Rate Raised Height (30mm Lift) 1 C43-240

Linear Rate Raised Height (32mm Lift) 1 C43-135 Suits:

(B)

Suits:

Linear Rate Standard Height 1 C43-121

(B)

Linear Rate Raised Height (35mm Lift) 1 C43-115

(B)

REAR

Price Code

Outlander

(if applicable)

(B)

QA H76 1.8L LWB QA H77 2.0L LWB

QTY

QTY

PART NUMBER

COIL SPRING

Suits:

QA H65 1.6L SWB QA H67 2.0L SWB

QA H76 1.8L LWB QA H77 2.0L LWB

Outlander

(if applicable)

COIL SPRING

QA H65 1.6L SWB QA H67 2.0L SWB

FRONT

PART NUMBER Price Code

Pajero iO

(if applicable)

COIL SPRING

Suits:

2002 - 12/2006 (2.0L)

ZG / ZH: 11/2006 on (3.0L)

REAR

PART NUMBER Price Code

Pajero iO

CU 4:

QTY

FRONT

QTY

SWB: 1.6L & 2.0L

Outlander

MITSUBISHI

MAKE:

PART NUMBER Price Code (if applicable)

COIL SPRING

ZE, ZF CU2 & CU4 Platform

Suits:

CU4 Platform

Linear Rate Standard Height 1 C55-032

(B)

Linear Rate Standard Height 1 C43-145

(B)

Linear Rate Raised Height (30mm Lift) 1 C43-120

(B)

Linear Rate Raised Height (30mm Lift) 1 C43-147

(B)

ZG, ZH GS Platform Linear Rate Raised Height (30mm Lift) 1 C43-254

Suits:

(B)

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

ZG, ZH GS Platform Linear Rate Raised Height (30mm Lift) 1 C43-255

Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts Raised are listed as a guide only

JAN14

(B)

65

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 NISSAN

TYPE: NP300 / Navara

Nissan

MODEL: MD21 - D22 YEAR: 09/1985 on NP300 2008 on DETAIL: Pickup, Single / Dual Cab, King Cab J66, Hardbody, Bakkie NISS-53

TORSION BAR

PART NUMBER Price Code (if applicable)

REAR

QTY

FRONT

QTY

NISSAN

MAKE:

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

3+3 Leaves Raised Height (40mm Lift) Up to 150Kg Constant Load 2 NAV-4WD-R 4+3 Leaves Raised Height (40mm Lift) 350Kg Constant Load 2 NAV-005-R 5+3 Leaves Raised Height (40mm Lift) 600Kg Constant Load 2 NAV-006-R Suits:

D21

(1986 - 1997)

Heavy Duty Rate Increased Length 1202mm 1 TB45-1456

Suits:

SHACKLE BUSH KIT

Kit Contains: 2 x PT255 8 x SPF203 1 PB45-1068K

D22

(1997 on) J66 Hardbody NP300

Heavy Duty Rate Increased Length 892mm 1 TB45-1446

U-BOLT KIT

Kit Contains: 2 x UB45-788 2 UB45-788K SHOCK ABSORBER SHOCK ABSORBER

Softer Option Twin Tube Gas 2 GS59-649 Heavy Duty Twin Tube Gas 2 GS59-636 Heavy Duty Twin Tube Gas 2 GS45-097

STEERING DAMPER

SHACKLE KIT

Greasable: Fit in Pairs 2 SK45-052 PIN KIT

D21 Model Only

66

JAN14

Heavy Duty Complete with Fittings 1 SD45-035

Greasable: Fit in Pairs 2 SP45-061

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Navara

NISSAN

NISSAN

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

MODEL: D40 STX YEAR: 11/2005 on Does Not Suit 550 Model DETAIL: 4x4 Single Cab, Dual Cab, Extra Cab, Frontier NISS-68

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

3+2 Leaves Raised Height (35mm Lift) Medium Duty Up to 100Kg Constant Load 2 L45-002-R 4+2 Leaves Raised Height (50mm Lift) Heavy Duty 250Kg Constant Load 2 L45-003-R

The 550 model has a wider chassis to fit the 3.0L V6 Turbo Diesel. The front shock absorbers and front springs ARE NOT the same as the 2.5L Turbo Diesel model

5+2 Leaves Raised Height (50mm Lift) Super Heavy Duty 380Kg Constant Load 2 L45-004-R

2.5L Turbo Diesel Linear Rate Standard Height (10mm Lift) 1 C45-252

(B)

Linear Rate Raised Height (40mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C45-256

(B)

Linear Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bull Bar AND Winch) 1 C45-254

(B)

SHACKLE BUSH KIT

Kit Contains: 2 x SPF972 4 x SPF203 4 x PB45-1507 1 PB45-1095K U-BOLT KIT

Kit Contains:

SHOCK ABSORBER

2 x UB59-667 2 UB59-667K 2 x UB59-453-2 2 UB59-453-2K 2 x UB59-453-2 2 UB59-453-2K

L45-002-R L45-003-R L45-004-R

Select correct u-bolt to suit appropriate spring selection

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-642

Heavy Duty Twin Tube Gas 2 GS45-645 SHACKLE KIT

STRUT CAP

Greasable: Fit in Pairs 2 SK45-054 PIN KIT

2 SC45-004

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-060

Raised Height measurements are listed as a guide only

JAN14

67

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Navara

NISSAN

MODEL: D40A STX550 YEAR: 04/2010 on Only Suits 550 Model DETAIL: V6 Turbo Diesel 4x4 Single Cab, Dual Cab, NISS-75 Extra Cab, (Frontier USA)

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

NISSAN

MAKE:

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

3+2 Leaves Raised Height (35mm Lift) Medium Duty Up to 100Kg Constant Load 2 L45-002-R 4+2 Leaves Raised Height (50mm Lift) Heavy Duty 250Kg Constant Load 2 L45-003-R 3.0L V6 Turbo Diesel Linear Rate Standard Height (10mm Lift) 1 C45-276

(B)

Linear Rate Raised Height (40mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C45-278

(B)

Linear Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bull Bar AND Winch) 1 C45-280

(B)

5+2 Leaves Raised Height (50mm Lift) Super Heavy Duty 380Kg Constant Load 2 L45-004-R SHACKLE BUSH KIT

Kit Contains: 2 x SPF972 4 x SPF203 4 x PB45-1507 1 PB45-1095K U-BOLT KIT

NOTE: The 550 model has a wider chassis to fit the 3.0L V6 Diesel. The front spring and shock absorbers are not the same as the 2.5L TD models.

Kit Contains: SHOCK ABSORBER

2 x UB59-667 2 UB59-667K 2 x UB59-453-2 2 UB59-453-2K 2 x UB59-453-2 2 UB59-453-2K

L45-002-R L45-003-R L45-004-R

Select correct u-bolt to suit appropriate spring selection

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-645 Heavy Duty Twin Tube Gas 2 GS45-644

STRUT CAP

SHACKLE KIT

Greasable: Fit in Pairs 2 SK45-054 PIN KIT

2 SC45-004

68

JAN14

Greasable: Fit in Pairs 2 SP59-060

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

NISSAN

TYPE: Pathfinder

NISSAN

MODEL: WD21

YEAR: 10/1987 - 1995

DETAIL: Terrano I, Bakkie, Tracker 4x4 2.4L, 3.0L V6, 2.7L TD

TORSION BAR

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

NISS-54

PART NUMBER Price Code

(if applicable)

Damage will occur to the drive line carrier bearing if more than 20mm lift is applied

Heavy Duty Rate Increased Length 1232mm 1 TB45-1458

Linear Rate Standard Height 1 C45-091

(B)

Linear Rate Raised Height (20mm Lift) Up to 100Kg Constant Load 1 C45-089

(B)

Linear Rate Raised Height (35mm Lift) Extra Heavy Duty 1 C45-083

(B)

SHOCK ABSORBER SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-636 Heavy Duty Twin Tube Gas 2 GS43-082S UNDER BODY BUSH KIT STEERING DAMPER Kit Includes Front & Rear Under Body Bushes

2 2 2 8

x x x x

Front Upper Arm Bush Front Lower Arm Bush Front Radius Rod Bush Rear Upper & Lower Trailing Arm Bush 2 x Rear Panhard Rod Bush

1 PB45-1229K

Heavy Duty Complete with Fittings 1 SD45-035 Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14

69

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

NISSAN

MAKE:

TYPE: Pathfinder

NISSAN

MODEL: R50

YEAR: 1995 - 2005

DETAIL: Terrano RX

COIL SPRING

PART NUMBER Price Code (if applicable)

Linear Rate Standard Height 1 C45-220

Linear Rate Raised Height (30mm Lift) 60-100Kg Accessories (Bull Bar and Winch) 1 C45-168

Linear Rate Raised Height (35mm Lift) Extra Heavy Duty 50-90Kg Accessories (Bull Bar and Winch) 1 C45-170

70

JAN14

REAR COIL SPRING

QTY

FRONT

QTY

NISS-61

PART NUMBER Price Code (if applicable)

(B)

Linear Rate Standard Height 1 C45-221

(B)

Linear Rate Raised Height (35mm Lift) 1 C45-169

(B)

(B)

(B)

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

NISSAN

TYPE: Pathfinder

NISSAN

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

MODEL: R51 YEAR: 2005 on Does Not Suit Ti 550 DETAIL: Station Wagon, Diesel 2.5L Tdi, 4.0L V6 Petrol NISS-67

PART NUMBER Price Code

(if applicable)

2.5L Tdi, 4 Cyl. Linear Rate Lowered Height 1 C45-250

(B)

Linear Rate Lowered Height 1 C45-251

(B)

Linear Rate Standard Height 1 C45-252

(B)

Linear Rate Standard Height 1 C45-253

(B)

Linear Rate Raised Height (40mm Lift) 1 C45-255

(B)

Linear Rate Raised Height (40mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C45-254

(B)

SHOCK ABSORBER SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-642

STRUT CAP

2 SC45-004

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Twin Tube Gas 2 GS45-643

Raised Height measurements are listed as a guide only

JAN14

71

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

NISSAN

MAKE:

NISSAN

TYPE: Pathfinder

MODEL: R51 Ti 550 YEAR: 2010 on Only Suits Ti 550 DETAIL: Station Wagon, Diesel 3.0L Tdi

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

NISS-76

PART NUMBER Price Code (if applicable)

3.0L Turbo Diesel Linear Rate Standard Height 1 C45-276 Linear Rate Raised Height (40mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C45-278

Linear Rate Standard Height 1 C45-253

(B)

Linear Rate Raised Height (40mm Lift) 1 C45-255

(B)

(B)

(B)

SHOCK ABSORBER SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-644

2 SC45-004

72

JAN14

Heavy Duty Twin Tube Gas 2 GS45-643

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

NISSAN

TYPE: Pathfinder

NISSAN

MODEL: R52

YEAR: 2013 on

DETAIL: 4x4

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (30mm Lift) 1 C45-420 Linear Rate Raised Height (30mm Lift) 50-80Kg Accessories (Bull Bar OR Winch) 1 C45-422

QTY

FRONT

QTY

NISS-79

PART NUMBER Price Code

(if applicable)

Linear Rate Standard Height 150-250Kg Constant Load 1 C45-421

(B)

(C)

Linear Rate Raised Height (30mm Lift) 1 C45-421

(B)

(C)

Linear Rate Raised Height (30mm Lift) 150-250Kg Constant Load 1 C45-423

(B)

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14 Rev.1

73

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Terrano

NISSAN

YEAR: 07/1993 on (Europe) 03/1997 on (Australia) DETAIL: Terrano II, Mistral, Ford Maverick (Europe) 2.4L, 2.7L TD, 3.0L TDi NISS-60

FRONT TORSION BAR

PART NUMBER Price Code (if applicable)

REAR COIL SPRING

QTY

MODEL: R20

QTY

NISSAN

MAKE:

PART NUMBER Price Code (if applicable)

Linear Rate Standard Height 1 C45-091

(B)

Linear Rate Raised Height (20mm Lift) Up to 100Kg Constant Load 1 C45-089

(B)

Heavy Duty Rate Increased Length 1232mm 1 TB45-1458 SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS21-463

74

JAN14

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-636

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts Raised are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TYPE:

PATROL

NISS-51

MODEL: YEAR:

Pickup has a Heavier Rear Spring

QTY

FRONT

NISS-52

PART NUMBER

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Single Stage

G160 MK SWB & LWB 08/1983 - 1988 Square Headlights

REAR

Price Code

LEAF SPRING

MODEL: YEAR:

G160 MQ (Ebro, Safari) 1980 - 11/1983 Round Headlights

QTY

NISSAN

NISSAN

MAKE:

(if applicable)

Two Stage

Suits:

MQ - Petrol & Diesel 6 Leaves 1 MQ-6L-F RH Raised Height (30mm Lift) 1 MQ-6L-F LH

7 Leaves Raised Height (40mm Lift) 1 MQ-7L-F RH Up to 50Kg Accessories (Bull Bar OR Winch) 1 MQ-7L-F LH Suits:

Suits:

SWB & LWB Station Wagon

5+2 Leaves 1 MQ-WAG-R RH Raised Height (45mm Lift) 1 MQ-WAG-R LH

MK - Petrol & Diesel 6 Leaves 1 MK-6L-F RH Raised Height (30mm Lift) 1 MK-6L-F LH

Suits:

7 Leaves Raised Height (40mm Lift) 1 MK-7L-F RH 50-80Kg Accessories (Bull Bar OR Winch) 1 MK-7L-F LH

Kit Contains:

2 x SPF2054, 4 x (22x16x58)

Kit Contains:

Suits: MK

4 x SPF2053, 2 x SPF2054, 2 x (22x16x58)

5+2 Leaves 1 MQ-UTE-R RH Raised Height (35mm Lift) 1 MQ-UTE-R LH

SHACKLE BUSH KIT

SHACKLE BUSH KIT

Suits: MQ

Pickup

Kit Contains: 2 x SPF2054 4 x SPF2051 4 x SPF2052 1 PB45-1022K

1 PB45-1021K 1 PB45-1024K

U-BOLT KIT

U-BOLT KIT

Type A

Kit Contains: 2 x UB45-453 2 UB45-453K

Type B

Right Hand Side

Kit Contains: 2 x UB45-682 (Type B) 1 UB45-682K

Left Hand Side

Kit Contains: 2 x UB45-451 (Type A) 1 UB45-451K

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-077 STEERING DAMPER

Heavy Duty Twin Tube Gas 2 GS45-076

Heavy Duty Complete with Fittings 1 SD45-022 Suits: MQ

SHACKLE KIT

SHACKLE KIT

Kit Contains:

2 x Greasable Pins & Nuts 2 x Plates & 2 x Metal Bushes

Suits: MK

Kit Contains:

2 x Greasable Pins & Nuts 2 x Plates & 1 x Metal Bushes

Greasable: Fit in Pairs 2 SK45-028

2 SK45-029 2 SK45-025

PIN KIT

PIN KIT

Fit in Pairs 2 SP45-027

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Fit in Pairs 2 SP45-027

Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts Raised are listed as a guide only

JAN14

75

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

NISSAN

MAKE:

NISSAN

TYPE: Patrol

MODEL: Y260

YEAR: 1989 on

DETAIL: 2.8L TD, SWB & LWB Grand Sud, Baroud NISS-58

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Single Stage

REAR

QTY

QTY

FRONT

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

6 Leaves Raised Height (35mm Lift) 2 NIS-260-F

SHACKLE BUSH KIT

Kit Contains: 4 x SPF2053 2 x SPF2054 2 x (22x16x58) 1 PB45-1024K

5+2 Leaves 1 MQ-WAG-R RH Raised Height (35mm Lift) 1 MQ-WAG-R LH

SHACKLE BUSH KIT

U-BOLT KIT

Type A

Kit Contains: 2 x SPF2054 4 x SPF2051 4 x SPF2052 1 PB45-1022K

Type B

Right Hand Side

Kit Contains: 2 x UB45-682 (Type B) 1 UB45-682K

Left Hand Side

Kit Contains: 2 x UB45-451 (Type A) 1 UB45-451K

U-BOLT KIT

Kit Contains: 2 x UB45-453 2 UB45-453K

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS51-116 STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD45-810

Heavy Duty Twin Tube Gas 2 GS45-115A SHACKLE KIT

SHACKLE KIT

Kit Contains: 2 x Greasable Pins & Nuts 2 x Plates 1 x Metal Bushes 2 SK45-025

Greasable: Fit in Pairs 2 SK45-028 PIN KIT

PIN KIT

Fit in Pairs 2 SP45-027

76

JAN14

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Fit in Pairs 2 SP45-027

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Patrol

NISSAN

NISSAN

MODEL: Y60 GQ

YEAR: 1988 - 05/1999

DETAIL: Pickup, GR Leaf Spring Suspension NISS-57

PART NUMBER

REAR

Price Code

LEAF SPRING

QTY

QTY

FRONT

LEAF SPRING

(if applicable)

Single Stage

PART NUMBER Price Code

(if applicable)

Two Stage

7 Lea Leaves Raised Height (45mm Lift) No Accessories 2 Y60-7L-F

5+2 Leaves Raised Height (50mm Lift) 1 Y60-5+2-R RH Up to 150Kg Constant Load 1 Y60-5+2-R LH

8 Leaves Raised Height (45mm Lift) 50-100Kg Accessories (Bull Bar and Winch) (Recommended) 2 Y60-8L-F

6+2 Leaves Raised Height (50mm Lift) 300Kg Constant Load 1 Y60-6+2-R RH (Recommended) 1 Y60-6+2-R LH

SHACKLE BUSH KIT

Kit Contains: 8 x SPF2260 4 x SPF2270 1 PB45-1018K

7+2 Leaves Raised Height (50mm Lift) 1 Y60-7+2-R RH 500Kg Constant Load 1 Y60-7+2-R LH

U-BOLT KIT

SHACKLE BUSH KIT

Kit Contains: 2 x UB45-669 2 UB45-669K

Kit Contains: 12 x SPF2260 1 PB59-1019K

SHOCK ABSORBER

U-BOLT KIT

Kit Contains: 2 x UB45-670-1 2 UB45-670-1K

Heavy Duty Twin Tube Gas 2 GS45-640

SHOCK ABSORBER STEERING DAMPER

Heavy Duty Complete with Fittings 1 SD45-022 SHACKLE KIT

Heavy Duty Twin Tube Gas (Big Bore) 2 GS45-125 SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-019

Greasable: Fit in Pairs 2 SK59-019

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047

PIN KIT

Greasable: Fit in Pairs 2 SP45-026

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

PIN KIT

Greasable: Fit in Pairs 2 SP45-026

Raised Height measurements are listed as a guide only

JAN14

77

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

NISSAN

MAKE:

NISSAN

TYPE: Patrol

MODEL: Y60 GQ

YEAR: 1992 - 05/1999

DETAIL: Pickup Coil Spring Suspension

PART NUMBER

REAR

Price Code

COIL SPRING

(B)

Linear Rate Raised Height (35mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) (Recommended) 1 C45-102

(B)

Linear Rate Raised Height (75mm Lift) 1 C45-108

(B)

Linear Rate Raised Height (60mm Lift) Extra Heavy Duty 70-120Kg Accessories (Bull Bar and Winch) 1 C45-104

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-114 STEERING DAMPER

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (20mm Lift) Up to 30Kg Accessories (Bull Bar OR Winch) 1 C45-098

QTY

FRONT

QTY

NISS-59

(if applicable)

Variable Rate Standard Height (20mm Lift) Up to 100Kg Constant Load 1 C45-145VT

(C)

Linear Rate Raised Height (45mm Lift) (Recommended) 1 C45-103

(B)

Linear Rate Raised Height (75mm Lift) 1 C45-129

(B)

Variable Rate Raised Height (50mm Lift) 1 C45-115VT

(C)

Variable Rate Raised Height (50mm Lift) 200Kg Constant Load 1 C45-123VT

(C)

Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 450Kg Constant Load 1 C45-105T

(C)

SHOCK ABSORBER

Heavy Duty (Big Bore) Complete with Fittings 1 SD45-836 UNDER BODY BUSH KIT

Heavy Duty Twin Tube Gas 2 GS45-115 Extra Heavy Duty Twin Tube Gas

See Rear Under Body Bush Kit

For Loaded Vehicles

2 GS59-703

UNDER BODY BUSH KIT CASTOR ADJUSTMENT PARTS Adjustable Front Radius Arm Castor Kit Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

1

PB59-503K

1

RB59-522K

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

78

JAN14

Kit Includes Front & Rear Under Body Bushes

4 4 4 8

x x x x

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front and Rear Panhard Rod Bush Rear Upper and Lower Trailing Arm Bush

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

1 PB45-1239K

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Patrol

NISSAN

NISSAN

MODEL: Y60 GQ

YEAR: 02/1988 - 1998

DETAIL: SWB GR, Safari, KYY60

COIL SPRING

PART NUMBER

REAR

Price Code

Linear Rate Raised Height (45mm Lift) 1 C45-094 Variable Rate Raised Height (45mm Lift) 1 C45-096V Variable Rate Raised Height (50mm Lift) 50-100Kg Constant Load 1 C45-110V

Linear Rate Standard Height 1 C45-093

(B)

(B)

Linear Rate Raised Height (45mm Lift) 1 C45-095

(B)

(B)

Variable Rate Raised Height (45mm Lift) 1 C45-101V

(B)

(B)

Linear Rate Raised Height (50mm Lift) 100-200Kg Constant Load 1 C45-189

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-114

Heavy Duty Twin Tube Gas 2 GS45-115

STEERING DAMPER

1988 - 08/1989

Heavy Duty (Big Bore) Complete with Fittings 1 SD45-834

08/1989 - 1999

Heavy Duty (Big Bore) Complete with Fittings 1 SD45-836

UNDER BODY BUSH KIT

See Rear Under Body Bush Kit

CASTOR ADJUSTMENT PARTS Adjustable Front Radius Arm Castor Kit

1 PB59-503K

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

SWAYBAR EXTENSIONS Adjustable Swaybar Extension (Suits 2” - 6” Lift)

GEARBOX SPACER KIT

(if applicable)

(B)

SHOCK ABSORBER

Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Standard Height 1 C45-092

QTY

FRONT

QTY

NISS-56

2 SE45-520

1 TC45-001K

Drive line vibration may occur with raised suspension. To reduce vibration we recommend fitting the above kit.

UNDER BODY BUSH KIT

Kit Includes Front & Rear Under Body Bushes

Pre 1989 4 x Front Radius Arm to Chassis Bush 4 x Front Radius Arm to Diff Bush 2 x Front Panhard Rod Bush 2 x Rear Panhard Rod Bush 8 x Rear Trailing Arm Bush

1 PB45-1231K

1989 on 4 x Front Radius Arm to Chassis Bush 4 x Front Radius Arm to Diff Bush 4 x Front & Rear Panhard Rod Bush 8 x Rear Upper & Lower Trailing Arm Bush

1 PB45-1239K

ALIGNMENT PARTS * Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1*

SE45-520

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1*

SE45-521

BRAKE ADJUSTER Recommended when raising vehicle (Suits 2” - 6” Lift) 1

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

BA45-005 JAN14 Rev.1

79

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

NISSAN

MAKE:

NISSAN

TYPE: Patrol

MODEL: Y60 GQ

YEAR: 08/1987 - 1998

DETAIL: LWB Station Wagon, GR, Safari, WYG60 NISS-55

REAR

Price Code

COIL SPRING

Suits:

PART NUMBER

(B)

1 C45-102

(B)

Linear Rate - Raised Height (75mm Lift) 1 C45-108 4.2L Petrol & 2.8L TD Linear Rate - Standard Height 1 C45-098 Linear Rate - Raised Height (45mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C45-102

(B)

Linear Rate - Raised Height (75mm Lift) 1 C45-108

(B)

Suits:

4.2L Diesel Variable Rate - Raised Height (45mm Lift) 1 C45-110V Linear Rate - Raised Height (45mm Lift) Extra Heavy Duty 70-120Kg Accessories (Bull Bar and Winch) 1 C45-104

(B)

Linear Rate - Raised Height (75mm Lift) Heavy Duty 60-110Kg Accessories (Bull Bar and Winch) 1 C45-108

Variable Rate - Raised Height (45mm Lift) Up to 100Kg Constant Load 1 C45-111VT Variable Rate - Standard Height (10mm Lift) Extra Heavy Duty Medium Load 1 C45-145VT Variable Rate - Raised Height Exrta Heavy Duty 1 C45-115VT

(B)

(B)

(B)

Raised Height (75mm Lift) No Load 1 C45-129 Linear Rate Raised Height (75mm Lift) 350Kg Constant Load 1 C45-309T Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 450Kg Constant Load 1 C45-105T

OR

(B)

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-114

(C)

(C)

Kit Includes Front & Rear Under Body Bushes

See Rear Under Body Bush Kit

4 4 4 8

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front & Rear Panhard Rod Bush Rear Upper & Lower Trailing Arm Bush

Adjustable Front Radius Arm Castor Kit

1 PB59-503K

Fixed Rubber Front Radius Arm Castor Kit

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

SWAYBAR EXTENSIONS 2 SE45-520 1 TC45-001K

Drive line vibration may occur with raised suspension. To reduce vibration we recommend fitting the above kit.

JAN14

(B)

For Loaded Vehicles 2 GS59-703

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front Panhard Rod Bush Rear Panhard Rod Bush Rear Trailing Arm Bush on

CASTOR ADJUSTMENT PARTS

80

(C)

UNDER BODY BUSH KIT

4x 4x 2x 2x 8x 1989

GEARBOX SPACER KIT

(C)

Extra Heavy Duty Twin Tube Gas

Pre 1989

Adjustable Swaybar Extension (Suits 2” - 6” Lift)

(B)

Heavy Duty Twin Tube Gas 2 GS45-115

UNDER BODY BUSH KIT

Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

(B)

SHOCK ABSORBER

STEERING DAMPER Heavy Duty (Big Bore) 1988 - 08/1989 Complete with Fittings 1 SD45-834 Heavy Duty (Big Bore) 08/1989 - 1999 Complete with Fittings 1 SD45-836

Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

(B)

Linear Rate Raised Height (50mm Lift) 250Kg Constant Load

(B)

Suits:

(if applicable)

Linear Rate Standard Height 1 C45-323 Linear Rate Raised Height (45mm Lift) 1 C45-103

3.0L Petrol 1 C45-092 1 C45-094 1 C45-096V

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Standard Height Linear Rate - Raised Height (40mm Lift) Variable Rate - Raised Height (40mm Lift) Linear Rate - Raised Height (50mm Lift) 50-80Kg Accessories (Bull Bar OR Winch)

QTY

QTY

FRONT

x x x x

1 PB45-1231K

1 PB45-1239K

ALIGNMENT PARTS * Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1*

SE45-520

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1*

SE45-521

BRAKE ADJUSTER Recommended when raising vehicle (Suits 2” - 6” Lift) 1

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

BA45-005

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Patrol

NISSAN

NISSAN

PART NUMBER

REAR

Price Code

COIL SPRING

QTY

FRONT

QTY

MODEL: Y61 GU YEAR: 01/1999 on UCLY61, UELY61 DETAIL: Pickup Front Coil Spring Suspension NISS-63 Rear Leaf Spring Suspension

LEAF SPRING

(if applicable)

PART NUMBER Price Code

(if applicable)

Two Stage

Suits:

OR Suits:

5+2 Leaves Raised Height (40mm Lift) 1 Y60-5+2-R RH Comfort Option 1 Y60-5+2-R LH

3.0L TD (2008 on) 4.2L Diesel

Linear Rate Standard Height 1 C45-140 Linear Rate Raised Height (40mm Lift) 1 C45-138 Linear Rate Raised Height (50mm Lift) No Accessories Raised Height (40mm Lift) 60Kg Accessories (Bull Bar OR Winch) 1 C45-130

(B)

6+2 Leaves Raised Height (50mm Lift) Heavy Duty 300Kg Constant Load 1 Y60-6+2-R RH (Recommended) 1 Y60-6+2-R LH

(B)

7+2 Leaves Raised Height (50mm Lift) Heavy Duty 1 Y60-7+2-R RH 500Kg Constant Load 1 Y60-7+2-R LH

(B)

4.2L TD

Linear Rate Standard Height 1 C45-132 Linear Rate Raised Height (30mm Lift) 1 C45-130 Linear Rate Raised Height (60mm Lift) No Accessories OR Raised Height (45mm Lift) 60-100Kg Accessories (Bull Bar and Winch) 1 C45-134

7+3 Leaves Raised Height (50mm Lift) Heavy Duty 650Kg Constant Load 2 L45-061-R

(B) (B)

SHACKLE BUSH KIT

Kit Contains: 12 x SPF2260 1 PB59-1019K

(B)

SHOCK ABSORBER U-BOLT KIT

Heavy Duty Twin Tube Gas 2 GS45-114

Kit Contains: 2 x UB45-454 2 UB45-454K

STEERING DAMPER

SHOCK ABSORBER

Heavy Duty (Big Bore) Complete with Fittings 1 SD51-811 ADJUSTABLE PANHARD RODS

Heavy Duty Twin Tube Gas (Big Bore) 2 GS45-125 RH Drive LH Drive

Complete with Bushes 1 PR45-1402 Complete with Bushes 1 PR45-1407

Greasable: Fit in Pairs 2 SK59-019

CASTOR ADJUSTMENT PARTS Adjustable Front Radius Arm Castor Kit Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

SHACKLE KIT

1

PB59-503K

1

RB59-522K

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

PIN KIT

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP45-026

Raised Height measurements are listed as a guide only

JAN14

81

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

NISSAN

MAKE:

NISSAN

TYPE: Patrol

MODEL: Y61 GU UCNY61, UEN61 DETAIL: Pickup Coil Spring Suspension

YEAR: 05/1999 on

PART NUMBER

REAR

Price Code

COIL SPRING

PART NUMBER Price Code

COIL SPRING

(if applicable)

(if applicable)

Suits:

OR

2.8L TD, 4.2L Diesel Linear Rate - Standard Height Linear Rate - Raised Height (40mm Lift) (Recommended) Linear Rate - Raised Height (75mm Lift) Linear Rate - Raised Height (50mm Lift) No Accessories Raised Height (40mm Lift) 60-100Kg Accessories (Bull Bar OR Winch)

QTY

FRONT

QTY

NISS-64

Suits:

OR

1 C45-140

(B)

1 C45-138 1 C45-134

(B)

1 C45-130

Linear Rate Standard Height Linear Rate Raised Height (45mm Lift) (Recommended) Linear Rate Raised Height (75mm Lift) Variable Rate Raised Height (50mm Lift) Variable Rate Raised Height (50mm Lift) 200Kg Constant Load Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 450Kg Constant Load

(B)

(B)

4.5L & 4.8L Petrol, 4.2L TD

Linear Rate Standard Height Linear Rate - Raised Height (30mm Lift) (Recommended) Linear Rate - Raised Height (75mm Lift) Linear Rate Raised Height (60mm Lift) No Accessories Raised Height (45mm Lift) 60-110Kg Accessories (Bull Bar and Winch)

1 C45-132

(B)

1 C45-130 1 C45-108

(B)

1 C45-134

(B)

1 C45-323

(B)

1 C45-103

(B)

1 C45-129

(B)

1 C45-115VT

(C)

1 C45-123VT

(C)

1 C45-105T

(C)

SHOCK ABSORBER

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-115 Heavy Duty Twin Tube Gas 2 GS45-114

Extra Heavy Duty Twin Tube Gas For Loaded Vehicles

STEERING DAMPER Heavy Duty (Big Bore) Complete with Fittings 1 SD51-811 UNDER BODY BUSH KIT

2 GS59-703

ALIGNMENT PARTS * Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each

See Rear Under Body Bush Kit

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1*

SE45-520

ADJUSTABLE PANHARD RODS

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1*

SE45-521

RH Drive LH Drive

Complete with Bushes 1 Complete with Bushes 1

PR45-1402 PR45-1407

BRAKE ADJUSTER Recommended when raising vehicle (Suits 2” - 6” Lift) 1

CASTOR ADJUSTMENT PARTS

UNDER BODY BUSH KIT

Adjustable Front Radius Arm Castor Kit Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

Kit Includes Front & Rear Under Body Bushes 1

PB59-503K

1

RB59-522K

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

BA45-005

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

4 4 4 8

x x x x

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front & Rear Panhard Rod Bush Rear Upper & Lower Trailing Arm Bush

1 PB45-1239K

ADJUSTABLE PANHARD RODS

SWAYBAR EXTENSIONS Adjustable Swaybar Extension (Suits 2” - 6” Lift)

82

JAN14

2

SE45-520

Complete with Bushes 1 PR45-1403

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Patrol

NISSAN

NISSAN

MODEL: Y61 GU

YEAR: 12/1997 on

VRGY61, TCSY61, WRGY61, WYY61, WTY61, WGY61

DETAIL: SWB & LWB Station Wagon NISS-62

PART NUMBER

REAR

Price Code

COIL SPRING

PART NUMBER Price Code

COIL SPRING

(if applicable)

SWB Linear Rate Raised Height (30mm Lift) 1 C45-004

QTY

QTY

FRONT

(if applicable)

(B)

LWB Suits:

2.8L & 3.0L TD, 4.2L Diesel Linear Rate - Standard Height 1 C45-140 Linear Rate - Raised Height (40mm Lift) (Recommended) 1 C45-138 Linear Rate - Raised Height (50mm Lift) No Accessories 1 C45-130 Raised Height (40mm Lift) 60-100Kg Accessories (Bull Bar and Winch)h

OR

Suits:

GU Patrol Series I, II, III, IV

(B)

(B)

4.5L & 4.8L Petrol, 4.2L TD Linear Rate Standard Height 1 C45-132 Linear Rate - Raised Height (30mm Lift) (Recommended) 1 C45-130

OR

(B)

Linear Rate Raised Height (60mm Lift) No Accessories 1 C45-134 Raised Height (45mm Lift) 60-110Kg Accessories (Bull Bar and Winch)

(B)

SWB Linear Rate Raised Height (40mm Lift) 1 C45-121

(B)

LWB Linear Rate Standard Height 1 C45-323

(B)

Linear Rate Raised Height (45mm Lift) Up to 100Kg Constant Load (Recommended) 1 C45-103

(B)

Linear Rate Raised Height (60mm Lift) No Load 1 C45-129 Raised Height (45mm Lift) 200Kg Constant Load

(B)

OR (B)

(B)

GU Patrol Series V

SHOCK ABSORBER

Raised Height (45mm Lift) No Accessories 1 C45-129

(B)

Raised Height (45mm Lift) 200Kg Constant Load 1 C45-329

(C)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-114 STEERING DAMPER (12/1997 - 02/2000)

(02/2000 on)

Heavy Duty (Big Bore) Complete with Fittings 1 SD51-811 Heavy Duty Twin Tube Gas 2 GS45-115

Heavy Duty (Big Bore) Complete with Fittings 1 SD45-801

Extra Heavy Duty Twin Tube Gas

For Loaded Vehicles 2 GS59-703

UNDER BODY BUSH KIT

UNDER BODY BUSH KIT Kit Includes Front & Rear Under Body Bushes

See Rear Under Body Bush Kit

4 4 4 8

CASTOR KIT Adjustable Front Radius Arm Castor Kit Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

1

PB59-503K

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front & Rear Panhard Rod Bush Rear Upper & Lower Trailing Arm Bush

1

RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

* Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1* SE45-520 Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1* SE45-521

SWAYBAR EXTENSIONS Adjustable Swaybar Extension (Suits 2” - 6” Lift)

1 PB45-1239K

ALIGNMENT PARTS

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

x x x x

2

SE45-520

BRAKE ADJUSTER Recommended when raising vehicle (Suits 2” - 6” Lift) 1

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

BA45-005

JAN14 Rev.1

83

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 NISSAN

TYPE: Patrol

MODEL: Y60 GQ / Y61 GU

YEAR: 1989 on

DETAIL: SWB 75mm (3” Lift) 100mm (4” Lift)

QTY

FRONT

NISS-73

PART NUMBER

REAR

Price Code

COIL SPRING

QTY

NISSAN

MAKE:

Price Code

COIL SPRING

(if applicable)

(if applicable)

Linear Rate Raised Height (3” Lift) No Accessories 1

C45-136

(B)

Linear Rate Raised Height (3” Lift) 60-100Kg Accessories (Bull Bar and Winch) 1

C45-134

(B)

Linear Rate Raised Height (3” Lift) 1

C45-189

(B)

(B)

Linear Rate Raised Height (4” Lift) 1

C45-193

(B)

Linear Rate Raised Height (4” Lift) 1

C45-304

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2

Heavy Duty Twin Tube Gas 2

GS51-116

STEERING DAMPER Suits: Suits: Suits: Suits:

Heavy Y60 Y60 Y61 Y61

Duty (Big Bore) - Complete with Fittings GQ 1988 - 08/1989 GQ 08/1989 - 1999 GU 12/1997 - 02/2000 GU 02/2000 on

1 1 1 1

SD45-834 SD45-836 SD51-811 SD45-801

Suits:

Post 1989 Kit Includes Front & Rear Under Body Bushes 4 4 4 8

Complete with Bushes 1 Complete with Bushes 1

PR45-1402 PR45-1407

PR45-1416 PR45-1409

1

1

2 x Upper Adjustable Trailing Arms with Bushes 1

RB59-522K

Recommended when raising vehicle (Suits 2” - 6” Lift) 1

BA45-005

WARNING - 75MM (3”) OR 100MM (4”) LIFT 1

WA45-509K

1

WA45-513K

2

SE45-520

1

TC45-001K

SWAYBAR EXTENSIONS

Drive line vibration may occur with raised suspension. To reduce vibration we recommend fitting the above kit.

JAN14

WA45-510K

BRAKE ADJUSTER

The suspension components listed on this page are for off-road use only … Refer to Local Laws before fitting to Registered/Road vehicles … An Engineering Certificate may be required … Handling characteristics will diminish on lifts above 50mm (2”)

CASTOR PLATE KIT

GEARBOX SPACER KIT

PR45-1415

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1* SE45-521

Extensive modifications are required to fit the RH and LH drop box. Gives a 5° of castor adjustment. Leading arm modifications are not required when fitting this part number.

Adjustable Swaybar Extension (Suits 2” - 6” Lift)

PR45-1403

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1* SE45-520

PB59-503K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

5° Castor Plate Kit (Suits both arms)

Complete with Bushes 1

Y61 GU Only (02/2000 on) (Ball Joint to Chassis Mount)

* Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each

Fixed Rubber Front Radius Arm Castor Kit

DROP BOX

Y60 GQ / Y61 GU (to 02/2000)

Complete with Ball Joint and Bush 1

CASTOR ADJUSTMENT PARTS

5° Drop Box Kit Sold as a Pair (1 LH & 1 RH)

PB45-1239K

ALIGNMENT PARTS

Adjustable Front Radius Arm Castor Kit

Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1

ADJUSTABLE PANHARD RODS Suits: Suits:

Complete with Ball Joint and Bush 1 Complete with Ball Joint and Bush 1

Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front & Rear Panhard Rod Bush Rear Upper & Lower Trailing Arm Bush

RH & LH Drive

Y61 GU Only (02/2000 on) (Ball Joint to Chassis Mount)

RH Drive LH Drive

84

x x x x

Y60 GQ / Y61 GU (to 02/2000)

RH Drive LH Drive

GS45-913

UNDER BODY BUSH KIT

ADJUSTABLE PANHARD RODS Suits:

PART NUMBER

• • • •

The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted Adjustable Panhard Rods Modified Leading / Trailing Arms Brake Hoses Extended Bump Stops

• • •

Gear Box & Drive Line Modifications Steering Arms Swaybar Modification

Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page. These products do not come with any warranty or guarantee.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

NISSAN

TYPE: Patrol

NISSAN

MODEL: Y60 GQ / Y61 GU

YEAR: 08/1987 on

DETAIL: Station Wagon & Pickup up p 75mm (3” Lift) NISS-78

PART NUMBER

REAR

Price Code

COIL SPRING

C45-134 C45-308

(if applicable)

GQ - GU Series I, II, III, IV Light Duty 1 50-100Kg Constant Load 1 100-250Kg Constant Load 1 250-350Kg Constant Load 1

(B) (B)

PART NUMBER Price Code

COIL SPRING

(if applicable)

4.5L Petrol, 2.8L & 3.0L T/Diesel, 4.2L Diesel No Accessories 1 50-100Kg Accessories 1 (Bull Bar and Winch)

QTY

QTY

FRONT

C45-129 C45-329 C45-309T C45-325T

(B) (C) (C) (C)

C45-329 C45-309T C45-325T

(C) (C) (C)

GU Series V 4.8L Petrol, 4.2L T/Diesel 50Kg Accessories 1 50-100Kg Accessories 1 100-200Kg Accessories 1

C45-308 C45-310 C45-108

Light Duty 1 50-100Kg Constant Load 1 150-250Kg Constant Load 1

(B) (B) (B)

SHOCK ABSORBER

SHOCK ABSORBER Heavy Duty Twin Tube Gas Suits all coils 2

Heavy Duty Twin Tube Gas Suits all coils 2

GS45-913

GS51-116

UNDER BODY BUSH KIT

STEERING DAMPER Heavy Duty (Big Bore) - Complete with Fittings Suits: Suits:

Y60 GQ Y60 GQ

1988 - 08/1989 (Wagon) 2 08/1989 - 1999 (Wagon & Pickup) 2

SD45-834 SD45-836

Suits:

Y61 GU

12/1997 - 02/2000 (Wagon) 2

SD51-811

Suits:

Y60 GQ & Y61 GU

01/1999 on (Pickup) 2

SD51-811

Y61 GU

02/2000 on (Wagon) 1

SD45-801

Suits:

ADJUSTABLE PANHARD RODS Suits: Y60 GQ & Y61 GU RH Drive - Complete with Buses

Post 1989 Kit Includes Front & Rear Under Body Bushes 4 4 4 8

x x x x

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front & Rear Panhard Rod Bush Rear Upper & Lower Trailing Arm Bush

1

PB45-1239K

ADJUSTABLE PANHARD RODS to 02/2000 (Wagon) 1

PR45-1402

RH Drive - Complete with Buses

1992 on (Pickup) 1

PR45-1402

Complete with Buses

LH Drive - Complete with Buses

to 02/2000 (Wagon) 1

PR45-1407

Complete with Buses

LH Drive - Complete with Buses

1992 on (Pickup) 1

PR45-1407

Suits:

Suits:

PR45-1416

LH Drive - Complete with Ball Joint & Bush 02/2000 on (Wagon) 1

PR45-1409

CASTOR ADJUSTMENT PARTS

1

PB59-503K

1

RB59-522K

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1* SE45-521 2 x Upper Adjustable Trailing Arms with Bushes 1 Recommended when raising vehicle (Suits 2” - 6” Lift) 1

BA45-005

WARNING - 75MM (3”) LIFT The suspension components listed on this page are for off-road use only

1

… Refer to Local Laws before fitting to Registered/Road vehicles … An Engineering Certificate may be required … Handling characteristics will diminish on lifts above 50mm (2”)

WA45-509K

May be required for vehicles lifted closer to 4”. Extensive modifications are required to fit the RH and LH drop box. Gives a 5° of castor adjustment. Leading arm modifications are not required when fitting this part number.

CASTOR PLATE KIT 1

WA45-513K

2

SE45-520

1

TC45-001K

SWAYBAR EXTENSIONS GEARBOX SPACER KIT

WA45-510K

BRAKE ADJUSTER

DROP BOX KIT

Adjustable Swaybar Extension (Suits 2” - 6” Lift)

PR45-1415

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1* SE45-520

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

5° Castor Plate Kit (Suits both arms)

Y61 GU Only (Ball Joint to Chassis Mount) 02/2000 on (Wagon) 1

ALIGNMENT PARTS

Fixed Rubber Front Radius Arm Castor Kit

5° Drop Box Kit Sold as a Pair (1 LH & 1 RH)

PR45-1403 PR45-1403

* Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each

Adjustable Front Radius Arm Castor Kit

Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

to 02/2000 (Wagon) 1 1992 on (Pickup) 1

Complete with Ball Joint & Bush

Suits: Y61 GU Only (Ball Joint to Chassis Mount) RH Drive - Complete with Ball Joint & Bush 02/2000 on (Wagon) 1

Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

Y60 GQ & Y61 GU

• • • •

The following modifications (but not limited to) may need to be made to the vehicle before the kit is fitted Adjustable Panhard Rods Modified Leading / Trailing Arms Brake Hoses Extended Bump Stops

Drive line vibration may occur with raised suspension. To reduce vibration we recommend fitting the above kit.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

• • •

Gear Box & Drive Line Modifications Steering Arms Swaybar Modification may be required

Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page. These products do not come with any warranty or guarantee.

Raised Height measurements are listed as a guide only

JAN14 Rev.2

85

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

NISSAN

MAKE:

NISSAN

TYPE: Patrol

MODEL: Y60 GQ / Y61 GU

YEAR: 1987 on

DETAIL: Station Wagon & Pickup 100mm (4” Lift) NISS-66

PART NUMBER

REAR

Price Code

COIL SPRING

QTY

QTY

FRONT

Price Code

COIL SPRING

(if applicable)

Variable Rate Raised Height (4” Lift) 1

C45-270V

(if applicable)

Variable Rate Raised Height (4” Lift) 1

C45-271V

(C)

Linear Rate Raised Height (4” Lift) - Medium Duty 0 - 100Kg Constant Load 1

C45-311T

(C)

Linear Rate Raised Height (4” Lift) - Extra Heavy Duty 100 - 250Kg Constant Load 1

C45-313T

(C)

Linear Rate Raised Height (4” Lift) - Extra Extra Heavy Duty 250 - 400Kg Constant Load 1

C45-315T

(C)

(C)

Linear Rate Raised Height (4” Lift) - Light Duty 1

C45-314

(B)

Linear Rate Raised Height (4” Lift) - Medium Duty 1

C45-316

(B)

Linear Rate Raised Height (4” Lift) - Heavy Duty 1

C45-100

(B)

Long travel shock absorber GS45-912 used with C45-270V allows coil to stay trapped at full extension

Long travel shock absorber GS45-915 used with C45-271V allows coil to stay trapped at full extension

SHOCK ABSORBER Heavy Duty Twin Tube Gas Suits all coils 2

SHOCK ABSORBER GS51-116

Heavy Duty Twin Tube Gas Suits all coils 2

Heavy Duty Twin Tube Gas Suits coil C45-270V 2 GS45-912

Heavy Duty (Big Bore) - Complete with Fittings Y60 GQ 1988 - 08/1989 2

SD45-834

Suits:

Y60 GQ

08/1989 - 1999 2

SD45-836

Suits:

Y61 GU

12/1997 - 02/2000 2

SD51-811

Suits:

Y61 GU

02/2000 on 1

SD45-801

ADJUSTABLE PANHARD RODS Suits:

Suits:

Post 1989

Complete with Bushes 1 Complete with Bushes 1

PR45-1402 PR45-1407

x x x x

Suits:

PR45-1416 PR45-1409

1

1

RB59-522K

2 x Upper Adjustable Trailing Arms with Bushes 1 Recommended when raising vehicle (Suits 2” - 6” Lift) 1

WA45-509K

1

WA45-513K

2

SE45-520

1

TC45-001K

SWAYBAR EXTENSIONS

Drive line vibration may occur with raised suspension. To reduce vibration we recommend fitting the above kit.

86

JAN14 Rev.2

WA45-510K

BRAKE ADJUSTER BA45-005

WARNING - 75MM (3”) OR 100MM (4”) LIFT 1

CASTOR PLATE KIT

GEARBOX SPACER KIT

PR45-1415

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1* SE45-521

The suspension components listed on this page are for off-road use only … Refer to Local Laws before fitting to Registered/Road vehicles … An Engineering Certificate may be required … Handling characteristics will diminish on lifts above 50mm (2”)

Extensive modifications are required to fit the RH and LH drop box. Gives a 5° of castor adjustment. Leading arm modifications are not required when fitting this part number.

Adjustable Swaybar Extension (Suits 2” - 6” Lift)

PR45-1403

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1* SE45-520

PB59-503K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

5° Castor Plate Kit (Suits both arms)

Complete with Bushes 1

Y61 GU Only (02/2000 on) (Ball Joint to Chassis Mount)

* Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each

Fixed Rubber Front Radius Arm Castor Kit

DROP BOX

Y60 GQ / Y61 GU (to 02/2000)

Complete with Ball Joint and Bush 1

CASTOR KIT

5° Drop Box Kit Sold as a Pair (1 LH & 1 RH)

PB45-1239K

ALIGNMENT PARTS

Adjustable Front Radius Arm Castor Kit

Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1

ADJUSTABLE PANHARD RODS

Suits:

Complete with Ball Joint and Bush 1 Complete with Ball Joint and Bush 1

Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front & Rear Panhard Rod Bush Rear Upper & Lower Trailing Arm Bush

RH & LH Drive

Y61 GU Only (02/2000 on) (Ball Joint to Chassis Mount)

RH Drive LH Drive

UNDER BODY BUSH KIT

Kit Includes Front & Rear Under Body Bushes 4 4 4 8

Y60 GQ / Y61 GU (to 02/2000)

RH Drive LH Drive

GS45-913

Heavy Duty Twin Tube Gas Suits coil C45-271V 2 GS45-915

STEERING DAMPER Suits:

PART NUMBER

• • • •

The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted Adjustable Panhard Rods Modified Leading / Trailing Arms Brake Hoses Extended Bump Stops

• • •

Gear Box & Drive Line Modifications Steering Arms Swaybar Modification

Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page. These products do not come with any warranty or guarantee.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Patrol

NISSAN

NISSAN

MODEL: Y60 GQ / Y61 GU

YEAR: 1987 on

DETAIL: Station Wagon & Pickup 150mm (6” Lift) NISS-69

PART NUMBER

REAR

Price Code

COIL SPRING

QTY

QTY

FRONT

Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (6” Lift) - Light Duty 1 Linear Rate Raised Height (6” Lift) - Heavy Duty 1 Linear Rate Raised Height (6” Lift) - Extra Heavy Duty 1

C45-320 C45-128 C45-322

(if applicable)

(B)

Linear Rate Raised Height (6” Lift) - Light Duty 1

C45-319

(C)

(C)

Linear Rate Raised Height (6” Lift) - Heavy Duty 1

C45-131T

(C)

(C)

Linear Rate Raised Height (6” Lift) - Extra Heavy Duty 1

C45-317T

(C)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-912

Heavy Duty Twin Tube Gas 2 GS45-915

STEERING DAMPER Suits:

Heavy Duty (Big Bore) - Complete with Fittings Y60 GQ 1988 - 08/1989 2

UNDER BODY BUSH KIT SD45-834

Suits:

Y60 GQ

08/1989 - 1999 2

SD45-836

Suits:

Y61 GU

12/1997 - 02/2000 2

SD51-811

Suits:

Y61 GU

02/2000 on 1

SD45-801

Post 1989 Kit Includes Front & Rear Under Body Bushes 4 4 4 8

x x x x

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front & Rear Panhard Rod Bush Rear Upper & Lower Trailing Arm Bush

ADJUSTABLE PANHARD RODS Suits:

Suits:

Suits:

Complete with Bushes 1 Complete with Bushes 1

PR45-1402 PR45-1407

Y61 GU Only (02/2000 on) (Ball Joint to Chassis Mount)

RH Drive LH Drive

Complete with Ball Joint and Bush 1 Complete with Ball Joint and Bush 1

Suits:

Complete with Ball Joint and Bush 1

1

PB59-503K

1

RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

DROP BOX

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1* SE45-521 2 x Upper Adjustable Trailing Arms with Bushes 1 Recommended when raising vehicle (Suits 2” - 6” Lift) 1

BA45-005

The suspension components listed on this page are for off-road use only

WA45-509K

1

WA45-513K

2

SE45-520

1

TC45-001K

SWAYBAR EXTENSIONS GEARBOX SPACER KIT

WA45-510K

BRAKE ADJUSTER WARNING - 150MM (6”) LIFT

1

CASTOR PLATE KIT

Adjustable Swaybar Extension (Suits 2” - 6” Lift)

PR45-1415

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1* SE45-520

… Refer to Local Laws before fitting to Registered/Road vehicles … An Engineering Certificate may be required … Handling characteristics will diminish on lifts above 50mm (2”)

Extensive modifications are required to fit the RH and LH drop box. Gives a 5° of castor adjustment. Leading arm modifications are not required when fitting this part number.

5° Castor Plate Kit (Suits both arms)

PR45-1403

ALIGNMENT PARTS

Fixed Rubber Front Radius Arm Castor Kit

5° Drop Box Kit Sold as a Pair (1 LH & 1 RH)

Complete with Bushes 1

Y61 GU Only (02/2000 on) (Ball Joint to Chassis Mount)

* Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each

Adjustable Front Radius Arm Castor Kit

Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

PB45-1239K

Y60 GQ / Y61 GU (to 02/2000)

RH & LH Drive

PR45-1416 PR45-1409

CASTOR KIT Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

1

ADJUSTABLE PANHARD RODS

Y60 GQ / Y61 GU (to 02/2000)

RH Drive LH Drive

PART NUMBER

• • • •

The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted Adjustable Panhard Rods Modified Leading / Trailing Arms Brake Hoses Extended Bump Stops

Drive line vibration may occur with raised suspension. To reduce vibration we recommend fitting the above kit.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

• • •

Gear Box & Drive Line Modifications Steering Arms Swaybar Modification

Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page. These products do not come with any warranty or guarantee.

Raised Height measurements are listed as a guide only

JAN14 Rev.1

87

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

NISSAN

MAKE:

NISSAN

TYPE: Patrol

MODEL: Y60 GQ / Y61 GU

YEAR: 08/1987 on Flexi Springs have a Longer Free Length allowing a Long Travel Shock Absorber to provide more Wheel Articulation without the Spring becoming Untrapped.

DETAIL: Station Wagon & Pickup up p 75mm (3” FLEXI Lift)

NISS-71

PART NUMBER

REAR

Price Code

COIL SPRING

Price Code

COIL SPRING

(if applicable)

All Coils Variable Rate

PART NUMBER

QTY

QTY

FRONT

(if applicable)

2.8L & 3.0L T/Diesel, 4.2L Diesel No 50-100Kg 100-200Kg 200-300Kg

Accessories Accessories Accessories Accessories

1 1 1 1

C45-610V C45-612V C45-710V C45-730V

(C) (C) (C) (C)

1 1 1 1

C45-612V C45-710V C45-730V C45-756V

(C) (C) (C) (C)

Heavy Duty Twin Tube Gas Suits all coils 2

GS59-683

All Coils Variable Rate

No Load 1 100-200Kg Constant Load 1 200-300Kg Constant Load 1 300-400Kg Constant Load 1

4.5L & 4.8L Petrol, 4.2L T/Diesel No 50-100Kg 100-200Kg 200-300Kg

Accessories Accessories Accessories Accessories

C45-729V C45-731V C45-725V C45-271V

(C) (C) (C) (C)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas Suits all coils 2

STEERING DAMPER Heavy Duty (Big Bore) - Complete with Fittings Suits:

Y60 GQ

Suits: Suits:

Y60 GQ

1988 - 08/1989 (Wagon) 2 08/1989 - 1999 (Wagon & Pickup) 2

SD45-834 SD45-836

Y61 GU

12/1997 - 02/2000 (Wagon) 2

SD51-811

Suits:

Y60 GQ & Y61 GU

01/1999 on (Pickup) 2

SD51-811

Suits:

Y61 GU

02/2000 on (Wagon) 1

SD45-801

Post 1989 Kit Includes Front & Rear Under Body Bushes 4 4 4 8

ADJUSTABLE PANHARD RODS Suits: Y60 GQ & Y61 GU RH Drive - Complete with Buses

x x x x

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front & Rear Panhard Rod Bush Rear Upper & Lower Trailing Arm Bush

to 02/2000 (Wagon) 1

PR45-1402

RH Drive - Complete with Buses

1992 on (Pickup) 1

PR45-1402

Complete with Buses

LH Drive - Complete with Buses

to 02/2000 (Wagon) 1

PR45-1407

Complete with Buses

LH Drive - Complete with Buses

1992 on (Pickup) 1

PR45-1407

Suits: Y61 GU Only (Ball Joint to Chassis Mount) RH Drive - Complete with Ball Joint & Bush 02/2000 on (Wagon) 1

PR45-1416

LH Drive - Complete with Ball Joint & Bush 02/2000 on (Wagon) 1

PR45-1409

Suits:

Suits:

PB45-1239K

Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

1

2 x Upper Adjustable Trailing Arms with Bushes 1 1

WA45-510K

BRAKE ADJUSTER

RB59-522K

Recommended when raising vehicle (Suits 2” - 6” Lift) 1

BA45-005

WARNING - 75MM (3”) LIFT The suspension components listed on this page are for off-road use only

1

… Refer to Local Laws before fitting to Registered/Road vehicles … An Engineering Certificate may be required … Handling characteristics will diminish on lifts above 50mm (2”)

WA45-509K

CASTOR PLATE KIT 1

WA45-513K

2

SE45-520

1

TC45-001K

SWAYBAR EXTENSIONS GEARBOX SPACER KIT

PR45-1415

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1* SE45-521

PB59-503K

May be required for vehicles lifted closer to 4”. Extensive modifications are required to fit the RH and LH drop box. Gives a 5° of castor adjustment. Leading arm modifications are not required when fitting this part number.

Adjustable Swaybar Extension (Suits 2” - 6” Lift)

Y61 GU Only (Ball Joint to Chassis Mount) 02/2000 on (Wagon) 1

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1* SE45-520

DROP BOX KIT

5° Castor Plate Kit (Suits both arms)

PR45-1403 PR45-1403

* Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

5° Drop Box Kit Sold as a Pair (1 LH & 1 RH)

to 02/2000 (Wagon) 1 1992 on (Pickup) 1

ALIGNMENT PARTS

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

Y60 GQ & Y61 GU

Complete with Ball Joint & Bush

Adjustable Front Radius Arm Castor Kit

Drive line vibration may occur with raised suspension. To reduce vibration we recommend fitting the above kit.

JAN14

1

ADJUSTABLE PANHARD RODS

CASTOR ADJUSTMENT PARTS

88

GS45-915

UNDER BODY BUSH KIT

• • • •

The following modifications (but not limited to) may need to be made to the vehicle before the kit is fitted Adjustable Panhard Rods Modified Leading / Trailing Arms Brake Hoses Extended Bump Stops

• • •

Gear Box & Drive Line Modifications Steering Arms Swaybar Modification may be required

Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page. These products do not come with any warranty or guarantee.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Patrol

NISSAN

NISSAN

MODEL: Y60 GQ / Y61 GU

YEAR: 08/1987 on Flexi Springs have a Longer Free Length allowing a Long Travel Shock Absorber to provide more Wheel Articulation without the Spring becoming Untrapped.

DETAIL: Station Wagon & Pickup p 100mm (4” FLEXI Lift)

NISS-72

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

All Coils Variable Rate

2.8L & 3.0L T/Diesel, 4.2L Diesel Accessories Accessories Accessories Accessories

1 1 1 1

C45-710V C45-730V C45-270V C45-754V

(C) (C) (C) (C)

1 1 1 1

C45-730V C45-270V C45-754V C45-760V

(C) (C) (C) (C)

No Load 1 100-200Kg Constant Load 1 200-300Kg Constant Load 1 300-400Kg Constant Load 1

4.5L & 4.8L Petrol, 4.2L T/Diesel No 50-100Kg 100-200Kg 200-300Kg

Accessories Accessories Accessories Accessories

PART NUMBER Price Code

COIL SPRING

(if applicable)

All Coils Variable Rate

No 50-100Kg 100-200Kg 200-300Kg

QTY

QTY

FRONT

C45-725V C45-271V C45-273V C45-775V

(C) (C) (C) (C)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-915

Heavy Duty Twin Tube Gas 2 GS45-912

STEERING DAMPER Suits: Suits: Suits: Suits: Suits:

Heavy Y60 Y60 Y61 Y60 Y61

Duty (Big Bore) - Complete with Fittings GQ 1988 - 08/1989 (Wagon) GQ 08/1989 - 1999 (Wagon & Pickup) GU 12/1997 - 02/2000 (Wagon) GQ & Y61 GU 01/1999 on (Pickup) GU 02/2000 on (Wagon)

UNDER BODY BUSH KIT 2 2 2 2 1

SD45-834 SD45-836 SD51-811 SD51-811 SD45-801

Post 1989 Kit Includes Front & Rear Under Body Bushes 4 4 4 8

x x x x

ADJUSTABLE PANHARD RODS Suits: Y60 GQ & Y61 GU RH Drive - Complete with Buses RH Drive - Complete with Buses LH Drive - Complete with Buses LH Drive - Complete with Buses

to 02/2000 (Wagon) 1992 on (Pickup) to 02/2000 (Wagon) 1992 on (Pickup)

1 1 1 1

PR45-1402 PR45-1402 PR45-1407 PR45-1407

Suits: Y61 GU Only (Ball Joint to Chassis Mount) RH Drive - Complete with Ball Joint & Bush 02/2000 on (Wagon) 1 LH Drive - Complete with Ball Joint & Bush 02/2000 on (Wagon) 1

PR45-1416 PR45-1409

CASTOR KIT

DROP BOX

1

PR45-1415

Adjustable Swaybar Extension (Suits 2” - 6” Lift) Stem Upper / Right Angle Lower Joint 1* SE45-520 Adjustable Swaybar Extension (Suits 2” - 6” Lift) Right Angle Upper / Right Angle Lower Joint 1* SE45-521

1

2 x Upper Adjustable Trailing Arms with Bushes 1

RB59-522K

WA45-510K

BRAKE ADJUSTER Recommended when raising vehicle (Suits 2” - 6” Lift) 1

BA45-005

WARNING - 100MM (4”) LIFT 1

The suspension components listed on this page are for off-road use only

WA45-509K

1

WA45-513K

2

SE45-520

1

TC45-001K

SWAYBAR EXTENSIONS GEARBOX SPACER KIT

Y61 GU Only (Ball Joint to Chassis Mount) 02/2000 on (Wagon) 1

ALIGNMENT PARTS

PB59-503K

CASTOR PLATE KIT

Adjustable Swaybar Extension (Suits 2” - 6” Lift)

PR45-1403 PR45-1403

Complete with Ball Joint & Bush

… Refer to Local Laws before fitting to Registered/Road vehicles … An Engineering Certificate may be required … Handling characteristics will diminish on lifts above 50mm (2”)

Extensive modifications are required to fit the RH and LH drop box. Gives a 5° of castor adjustment. Leading arm modifications are not required when fitting this part number.

5° Castor Plate Kit (Suits both arms)

to 02/2000 (Wagon) 1 1992 on (Pickup) 1

Complete with Bushes

* Check Swaybar Link Configuration - Some vehicles require 2 of the same and others require 1 of each

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

5° Drop Box Kit Sold as a Pair (1 LH & 1 RH)

PB45-1239K

Y60 GQ & Y61 GU

Complete with Bushes

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1

ADJUSTABLE PANHARD RODS Suits:

Suits:

Adjustable Front Radius Arm Castor Kit Angle Settings: ±0°, ±2.5° or ±3.5° 4 x Polyurethane Eccentric Bushes

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front & Rear Panhard Rod Bush Rear Upper & Lower Trailing Arm Bush

• • • •

The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted Adjustable Panhard Rods Modified Leading / Trailing Arms Brake Hoses Extended Bump Stops

Drive line vibration may occur with raised suspension. To reduce vibration we recommend fitting the above kit.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

• • •

Gear Box & Drive Line Modifications Steering Arms Swaybar Modification

Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page. These products do not come with any warranty or guarantee.

Raised Height measurements are listed as a guide only

JAN14

89

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

NISSAN

MAKE:

NISSAN

TYPE: Patrol

MODEL: Y62

YEAR: 2010 on

DETAIL: LWB Wagon 5.6L V8 Petrol

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

NISS-74

PART NUMBER Price Code (if applicable)

Linear Rate Raised Height (45mm Lift) 1 C45-355

(C)

Excessive tyre wear may occur if the load is not permanent when the coils below are fitted. 4-wheel alignment is recommended for all coils.

Linear Rate Raised Height (45mm Lift) No Accessories 1 C45-354 Linear Rate Raised Height (45mm Lift) 50-100Kg Accessories (Bull Bar AND Winch) 1 C45-356

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-110 These Shock Absorbers do not suit vehicles with Hydraulic Body Motion Control System

MONSTER SHOCK

Extra Heavy Duty Twin Tube Gas Valve Force Increased to Suit Heavy Loads 45mm Piston 70mm Body for Increased Quantity of Oil and Cooling Capacity Adjustable Sprint Seat 4mm Wall Thickness 2 GS45-112

90

JAN14 Rev.1

(C)

(C)

Linear Rate Raised Height (45mm Lift) 150-250Kg Constant Load 1 C45-357

(C)

Linear Rate Raised Height (45mm Lift) 250-350Kg Constant Load 1 C45-359

(C)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-111 These Shock Absorbers do not suit vehicles with Hydraulic Body Motion Control System

MONSTER SHOCK

Extra Heavy Duty Twin Tube Gas Valve Force Increased to Suit Heavy Loads 45mm Piston 70mm Body for Increased Quantity of Oil and Cooling Capacity Adjustable Sprint Seat 4mm Wall Thickness 2 GS45-113

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

NISSAN

TYPE: Xterra

NISSAN

MODEL: N50

YEAR: 2005 on

DETAIL: Station Wagon

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

NISS-77

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

4+2 Leaves Raised Height (40mm Lift) 2 L45-8185-R 5+2 Leaves Raised Height (40mm Lift) 200Kg to GVM 2 L45-8192-R Linear Rate Raised Height (40mm Lift) 1 C45-256 Linear Rate Raised Height (40mm Lift) 50 - 100Kg Accessories 1 C45-254

(B)

(B)

SHACKLE BUSH KIT

Kit Contains: 2 x SPF972 4 x SPF203 4 x PB45-1507 1 PB45-1095K U-BOLT KIT

SHOCK ABSORBER

Kit Contains: 2 x UB59-453-3 2 UB59-453-3K SHACKLE KIT

Greasable: Fit in Pairs 2 SK45-054 SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-642 Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Twin Tube Gas 2 GS45-645 Raised Height measurements are listed as a guide only

JAN14

91

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

SSANGYONG

TYPE:

Musso Korando

SSAN-51

SSAN-61

Ssangyong Ssangyong MODEL: Musso YEAR: 1995 - 2006

MODEL: YEAR:

Korando 1995 - 2006

FRONT TORSION BAR

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Suits:

Heavy Duty Rate Increased Length 1040mm 1 TB53-1800

Suits:

SHOCK ABSORBER

Suits:

QTY

S/Wagon, Sports Dual Cab Pickup

QTY

SSANGYONG

4X4

PART NUMBER Price Code (if applicable)

Korando Linear Rate Raised Height (30mm Lift) Up to 100Kg Constant Load 1 C53-003

(B)

Linear Rate Raised Height (50mm Lift) Up to 100Kg Constant Load 1 C53-001

(B)

Musso Station Wagon Linear Rate Standard Height (10mm Lift) 1 C53-003

(B)

Linear Rate Raised Height (40mm Lift) Up to 100Kg Constant Load (Recommended) 1 C53-001

(B)

Musso Sports Dual Cab Pickup Linear Rate Raised Height (40mm Lift) Up to 100Kg Constant Load 1 C53-005

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS21-463

92

JAN14 Rev.1

Heavy Duty Twin Tube Gas 2 GS21-637S

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Rexton (Series I)

SSANGYONG RX270 2.7L TD MODEL: RX290 2.9L TD RX320 3.2L Petrol DETAIL: Station Wagon

SSANGYONG

MAKE:

YEAR: 2002 - 12/2005

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (30mm Lift) 1 C53-010

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS53-200

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

QTY

FRONT

QTY

SSAN-52

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (30mm Lift) 1 C53-011

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-225A

Raised R Rai aised d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts are listed as a guide only

JAN14 Rev.1

93

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

TYPE: Rexton (Series II)

SSANGYONG

MODEL: RX270 XDI YEAR: 2006 on Rigid Axle RX270 SPR Independent Suspension DETAIL: Station Wagon SSAN-53

COIL SPRING

PART NUMBER

REAR

Price Code

Linear Rate Raised Height (35mm Lift) 1 C53-004

Linear Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bull Bar and Winch) 1 C53-010

Suits:

(if applicable)

Rigid Axle Models

(B)

(B)

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Standard Height 1 C53-002

QTY

FRONT

QTY

SSANGYONG

4X4

Linear Rate Standard Height 1 C53-009

(B)

Linear Rate Raised Height (35mm Lift) 1 C53-011

(B)

Independent Suspension Linear Rate Raised Height (40mm Lift) 1 C53-013

(B)

(B)

Suits:

SHOCK ABSORBER

SHOCK ABSORBER

Suits:

Rigid Axle Models Heavy Duty Twin Tube Gas 2 GS57-621

Suits: Heavy Duty Twin Tube Gas 2 GS53-202

94

JAN14

Independent Suspension Heavy Duty Twin Tube Gas 2 GS57-639S

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 SSANGYONG

TYPE: Kyron

MODEL: M200 XVT

SSANGYONG

MAKE:

YEAR: 2006 on

DETAIL: D100 Series

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Suits: Linear Rate Standard Height 1 C53-006 Linear Rate Raised Height (40mm Lift) 1 C53-008

QTY

FRONT

QTY

SSAN-54

PART NUMBER Price Code

(if applicable)

(B)

Rigid Axle Models Only Linear Rate Standard Height 1 C53-007

(B)

(B)

Linear Rate Raised Height 1 C53-009

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS53-200S

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS57-621

Raised Height measurements are listed as a guide only

JAN14

95

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

MAKE:

SSANGYONG

TYPE: Actyon

MODEL: A200S Q100 Series DETAIL: Sports Utility 4 Door 2.0L Diesel

YEAR: 2007 on

FRONT COIL SPRING

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (40mm Lift) 1 C53-008

PART NUMBER Price Code (if applicable)

(B)

Linear Rate Raised Height (40mm Lift) 1 C53-003

(B)

Linear Rate Raised Height (40mm Lift) Up to 70Kg Accessories (Bull Bar OR Winch) 1 C53-004

(B)

Linear Rate Raised Height (50mm Lift) 200Kg Constant Load 1 C53-005

(B)

Linear Rate Raised Height (40mm Lift) 70 - 120Kg Accessories (Bull Bar and Winch) 1 C53-010

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS53-200

96

REAR

QTY

SSAN-55

QTY

SSANGYONG

4X4

JAN14

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS57-639S

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

PART NUMBER

REAR

Price Code

LEAF SPRING

Suits:

Petrol

Diesel

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Single Stage

Suits:

Suzuki

QTY

QTY

FRONT

SUZUKI

TYPE: Sierra SUZUKI Drover QB HOLDEN MODEL: SJ, LJ 410/413 YEAR: 1981 on SJ40, SJ50, SJ51, SJ70 DETAIL: Santana, Samurai, Rhino,Jimny Different U-Bolts on 410 Model SUZ-51

(if applicable)

Two Stage g

5 Leaves Raised Height (40mm Lift) No Accessories. Fit in Pairs 2 SUZ-5L-F

4+1 Leaves Raised Height (40mm Lift) 1 SUZ-4+1-R RH No Accessories. Fit in Pairs 1 SUZ-4+1-R LH

6 Leaves Raised Height (40mm Lift) No Accessories. Fit in Pairs 2 SUZ-6L-F

SHACKLE BUSH KIT

SHACKLE BUSH KIT

Kit Contains: 2 x SPF176 8 x SPF173 1 PB57-1034K Kit Contains: 2 x SPF176 8 x SPF173 1 PB57-1034K

U-BOLT KIT

U-BOLT KIT

Kit Contains: Suits:

SJ410 Right Hand Side Left Hand Side

Suits:

2 x UB57-655 1 UB57-655K 2 x UB29-900 1 UB29-900K

Suits:

SJ413, SJ50, SJ51 (1985 - 1996) 2 x UB57-654 1 UB57-654K Right Hand Side 2 x UB57-655 1 UB57-655K Left Hand Side

SJ410, SJ413, SJ50, SJ51 Kit Contains: 2 x UB57-655 2 UB57-655K SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS57-085 STEERING DAMPER

Heavy Duty Complete with Fittings 1 SD57-030

Heavy Duty Twin Tube Gas 2 GS57-086 SHACKLE KIT

SHACKLE KIT

Fit in Pairs 2 SK57-041

Fit in Pairs 2 SK57-041 PIN KIT

PIN KIT

Fit in Pairs 2 SP57-042

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Fit in Pairs 2 SP57-042

Raised Height measurements are listed as a guide only

JAN14

97

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

SUZUKI

MAKE:

SUZUKI

TYPE: Sierra

MODEL: SJ80

YEAR: 1995 - 11/1998

DETAIL: Coil Spring Suspension

PART NUMBER

REAR

QTY

FRONT

QTY

SUZ-54

Price Code COIL SPRING

Price Code

(if applicable)

Linear Rate Raised Height (30mm Lift) 1 C57-024

(if applicable)

COIL SPRING

(A)

Linear Rate Raised Height (30mm Lift) 1 C57-025

UNDER BODY BUSH KIT

UNDER BODY BUSH KIT

See Rear Under Body Bush Kit

Kit Includes Front & Rear Under Body Bushes

4 x Front and Rear Panhard Rod Bush 4 x Front and Rear Radius Arm to Chassis Mount 4 x Front and Rear Radius Arm to Diff Mount

98

JAN14

PART NUMBER

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

(A)

1 PB57-1253K

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

SUZUKI

TYPE: Jimny

SUZUKI

MODEL: SN413, FJB33V

YEAR: 1998 on

DETAIL: 3 Door 1.3L Hard Top / Soft Top 1.5L TDi

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Suits:

QTY

FRONT

QTY

SUZ-55

PART NUMBER Price Code

(if applicable)

G13BB 1.3L Engine

Linear Rate Raised Height (30mm Lift) Up to 35Kg Accessories (Bull Bar OR Winch) 1 C57-028

(A)

Linear Rate Raised Height (40mm Lift) 35-85Kg Accessories (Bull Bar and Winch) 1 C57-046

(A)

Linear Rate Raised Height (30mm Lift) 1 C57-029

(A)

Linear Rate Raised Height (40mm Lift) 1 C57-053

(A)

Fit Long travel shock absorber GS57-617 with the above spring.

Suits:

M13A 1.3L Petrol Linear Rate Raised Height (40mm Lift) 1 C57-046

(A)

Fit Long travel shock absorber GS57-618 with the above spring.

Fit Long travel shock absorber GS57-617 with the above spring.

Suits:

K9K 1.5L Turbo Diesel Linear Rate Raised Height (40mm Lift) 1 C57-048

SHOCK ABSORBER (A)

Fit Long travel shock absorber GS57-617 with the above spring.

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS57-615 To be used with original Suzuki springs OR C57-028

Heavy Duty Twin Tube Gas 2 GS57-616 To be used with original Suzuki springs OR C57-029

Heavy Duty Twin Tube Gas Long Travel 2 GS57-617 Can only be used with C57-046 OR C57-048

Heavy Duty Twin Tube Gas Long Travel 2 GS57-618

ADJUSTABLE PANHARD RODS

Can only be used with C57-053

Complete with Bushes 1 PR57-1412 Suits right-hand drive only

ADJUSTABLE PANHARD RODS

CASTOR ADJUSTMENT KIT

Kit Contains: 4 x Eccentric Bushes ±2 1/2° - 3° Adjustment 1 WA57-511K Raising vehicle will effect wheel alignment. It is recommended that this castor adjustment kit be fitted and a wheel alignment carried out.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Complete with Bushes 1 PR57-1413

Raised Height measurements are listed as a guide only

JAN14 Rev.1

99

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 SUZUKI

TYPE: Vitara YEAR: 1988 - 1997

DETAIL: 1.6L, 2.0L, 2.0L V6 / TD 3 Door, SWB Santana, Sidekick, Escudo, Geo Tracker

FRONT

PART NUMBER (if applicable)

Suits:

PART NUMBER Price Code (if applicable)

COIL SPRING

1.6L 8 Valve Engine Linear Rate Raised Height (40mm Lift) 1 C57-012

Suits:

REAR

Price Code

COIL SPRING

Suits:

SUZ-53

QTY

MODEL:

QTY

SUZUKI

MAKE:

2.0L, 1.6L 16 Valve Engine 2.0L V6 Petrol Linear Rate Raised Height (40mm Lift) 1 C57-016

(A)

(A)

2.0L TD Linear Rate Raised Height 1 C57-016

Linear Rate Raised Height (30mm Lift) 1 C57-013

(A)

SHOCK ABSORBER (A)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS57-621

Heavy Duty Twin Tube Gas Strut 2 GS57-620 UNDER BODY BUSH KIT

UNDER BODY BUSH KIT

See Rear Under Body Bush Kit Kit Includes Front & Rear Under Body Bushes

CAMBER ADJUSTMENT KIT

Kit Contains: 2 x Cam Bolts ±1.2° for Lower Control Arm Camber Adjustment 1 WA57-505K Raising vehicle will effect wheel alignment. It is recommended that this camber adjustment kit be fitted and a wheel alignment carried out.

100

JAN14

Front Lower Control Arm: 2 x Front Bush 2 x Rear Bush Rear Control Arm: 2 x Upper Bush 4 x Lower Bush

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

1 PB57-1252K

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

SUZUKI

TYPE: Vitara

SUZUKI

MODEL:

YEAR: 1991 - 1998

COIL SPRING

Suits:

PART NUMBER Price Code (if applicable)

1.6L 16 Valve Engine Linear Rate Raised Height (30mm Lift) 1 C57-016

Linear Rate Raised Height (30mm Lift) 40-80Kg Accessories (Bull Bar and Winch) 1 C57-018 Suits:

COIL SPRING

(A)

(A)

Price Code

(if applicable)

2.0L 4 Cyl, 2.0L V6

(A)

Linear Rate Raised Height (35mm Lift) 50-100Kg Constant Load 1 C57-047

(A)

SHOCK ABSORBER

(A)

Linear Rate Raised Height (25mm Lift) 40-80Kg Accessories (Bull Bar and Winch) 1 C57-034

(A)

2.0L TD / Tdi. 2.5L V6 Linear Rate Raised Height (35mm Lift) 1 C57-034

Linear Rate Raised Height (30mm Lift) No Load 1 C57-017

(A)

Linear Rate Raised Height (30mm Lift) Up to 40Kg Accessories (Bull Bar OR Winch) 1 C57-018

Suits:

PART NUMBER

1.6L 8 Valve Engine

Linear Rate Raised Height (30mm Lift) Up to 35Kg Accessories (Bull Bar OR Winch) 1 C57-012 Suits:

REAR

QTY

FRONT

QTY

DETAIL: 1.6L, 2.0L, 2.0L V6, 2.5L V6, 2.0L TD/Di 5 Door LWB SUZ-52 Escudo, Sidekick

(A)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS57-621

UNDER BODY BUSH KIT

Heavy Duty Twin Tube Gas Strut 2 GS57-620 UNDER BODY BUSH KIT

Kit Includes Front & Rear Under Body Bushes See Rear Under Body Bush Kit

CAMBER ADJUSTMENT KIT

Kit Contains: 2 x Cam Bolts ±1.2° for Lower Control Arm Camber Adjustment 1 WA57-505K Raising vehicle will effect wheel alignment. It is recommended that this camber adjustment kit be fitted and a wheel alignment carried out.

Front Lower Control Arm: 2 x Front Bush 2 x Rear Bush Rear Control Arm: 2 x Upper Bush 4 x Lower Bush

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

1 PB57-1252K

JAN14

101

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

SUZUKI

TYPE: Grand Vitara (Escudo)

SUZUKI

SQ420W 3 & 5 Door 4 Cyl.

MODEL:

YEAR: 1998 - 2005

SQ625W 5 Door 2.5L V6 SQ416 3 Door 06/2000 on

DETAIL: SWB LWB

1.6L 4 Cyl., 2.0L 4 Cyl., 2.0L TDi 2.5L V6, 2.0L 4 Cyl., 2.0L TDi

PART NUMBER

REAR

Price Code COIL SPRING

SWB 3 Door

COIL SPRING

(if applicable)

1.6L Petrol (A)

SWB & LWB

2.0L Petrol

Linear Rate Raised Height (30mm Lift) Heavy Duty Up to 35Kg Accessories (Bull Bar OR Winch) 1 C57-034 2.0L Petrol 2.5L V6 Petrol Linear Rate Raised Height (30mm Lift) Heavy Duty Up to 35Kg Accessories (Bull Bar OR Winch) 1 C57-034

(A)

LWB 5 Door

Linear Rate Raised Height (30mm Lift) 35-80Kg Accessories (Bull Bar and Winch) 1 C57-042 SWB & LWB

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (30mm Lift) 1 C57-018 SWB 3 Door

QTY

FRONT

QTY

SUZ-57

(A)

Linear Rate Raised Height (30mm Lift) Heavy Duty 1 C57-027

(A)

Linear Rate Raised Height (35mm Lift) Heavy Duty 35-65Kg Constant Load 1 C57-045

(A)

Linear Rate Raised Height (35mm Lift) Heavy Duty 130Kg Constant Load 1 C57-111

(B)

(A)

SHOCK ABSORBER

2.0L TD Linear Rate Raised Height (30mm Lift) 1 C57-042

(A)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas Strut 2 GS57-620

CAMBER ADJUSTMENT KIT

Kit Contains: 2 x Cam Bolts ±1.2° for Lower Control Arm Camber Adjustment 1 WA57-505K Raising vehicle will effect wheel alignment. It is recommended that this camber adjustment kit be fitted and a wheel alignment carried out.

102

JAN14

Heavy Duty Twin Tube Gas 2 GS57-621

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

SUZUKI

TYPE: Grand Vitara XL7

SUZUKI

MODEL: JA627

YEAR: 10/2001 on

DETAIL: 7 Seater 2.7L V6 H27A 2.0L TD

PART NUMBER

REAR

Price Code COIL SPRING

Linear Rate Raised Height (45mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C57-036

PART NUMBER Price Code

(if applicable)

Linear Rate Standard Height 1 C57-034

QTY

FRONT

QTY

SUZ-56

COIL SPRING

(if applicable)

(A)

Linear Rate Standard Height 1 C57-033

(A)

(A)

Linear Rate Raised Height (40mm Lift) Up to 100Kg Constant Load 1 C57-039

(A)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas Strut 2 GS57-620

CAMBER ADJUSTMENT KIT

Kit Contains: 2 x Cam Bolts ±1.2° for Lower Control Arm Camber Adjustment 1 WA57-505K Raising vehicle will effect wheel alignment. It is recommended that this camber adjustment kit be fitted and a wheel alignment carried out.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Twin Tube Gas 2 GS57-621

Raised Height measurements are listed as a guide only

JAN14

103

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 SUZUKI

TYPE: Grand Vitara YEAR: 08/2005 on

DETAIL: SWB: 1.6L 4 Cyl., 2.4L 4 Cyl., LWB: 2.0L 4 Cyl., 2.4L 4 Cyl., 2.7L V6, 3.2L V6, 1.9L Tdi

FRONT COIL SPRING

SWB 1.6L 4 Cyl.,

2.4L 4 Cyl.,

SUZ-58

PART NUMBER

REAR

Price Code COIL SPRING

Linear Rate Raised Height (50mm Lift) 1 C57-118

(B)

Linear Rate Raised Height (40mm Lift) 1 C57-118

(B)

Linear Rate Raised Height (50mm Lift) 1 C57-116

(B)

SWB Linear Rate Raised Height (40mm Lift) 1 C57-067

(B)

Linear Rate Raised Height (40mm Lift) 1 C57-065

(B)

Linear Rate Raised Height (40mm Lift) 100Kg Constant Load 1 C57-075

(B)

LWB

Linear Rate Raised Height (40mm Lift) 1 C57-116

(B)

Linear Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bull Bar AND Winch) 1 C57-112

(B)

Linear Rate Raised Height (40mm Lift) 1 C57-118

(B)

Linear Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bull Bar AND Winch) 1 C57-112

(B)

Linear Rate Raised Height (40mm Lift) 1 C57-112

(B)

Linear Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bull Bar AND Winch) 1 C57-114

(B)

3.2L V6

(if applicable)

(B)

LWB 1.9L Tdi, 2.4L 4 Cyl., 2.7L V6

2.0L 4 Cyl.,

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (50mm Lift) 50-100Kg Accessories (Bull Bar AND Winch) 1 C57-064

QTY

MODEL: JT Series

QTY

SUZUKI

MAKE:

SHOCK ABSORBER

SHOCK ABSORBER

1 GS57-622 RH Heavy Duty Twin Tube Gas Strut 1 GS57-622 LH CAMBER ADJUSTMENT KIT

Kit Contains: 2 x Cam Bolts ±1.2° Camber Adjustment Location: Lower Strut Mount, Upper Hole 1 WA57-506K Raising vehicle will effect wheel alignment. It is recommended that this camber correction kit be fitted and a wheel alignment be carried out.

104

JAN14

Heavy Duty Twin Tube Gas 2 GS57-623

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TOYOTA

TYPE: Hilux

Toyota Toyota

TOYOTA

MODEL: LN/RN 36/46/105 YEAR: 1979 - 11/1997 LN/YN 65/67/106, SR5 Models DETAIL: Leaf Spring Suspension TOY-61

PART NUMBER

REAR

Price Code

LEAF SPRING

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Single Stage

QTY

QTY

FRONT

(if applicable)

Two Stage

Rear springs must be fitted in pairs

Single Cab 5 Leaves - Raised Height (50mm Lift) 1 HIL-002-F RH 1 HIL-002-F LH

4+2 Leaves (Medium Duty) 1 HIL-4+2-R RH Raised Height (50mm Lift) 1 HIL-4+2-R LH Up to 100Kg Constant Load

5 Leaves - Raised Height (50mm Lift) 1 HIL-003-F RH Diesel - With Bull Bar OR Winch 1 HIL-003-F LH Dual Cab 5 Leaves - Raised Height (45mm Lift) 1 HIL-003-F RH Petrol & Diesel 1 HIL-003-F LH

5+2 Leaves (Heavy Duty) Raised Height (50mm Lift) 1 HIL-5+2-R RH 200Kg Constant Load 1 HIL-5+2-R LH 105/106

4+2 Leaves (Medium Duty) Raised Height (50mm Lift) Up to 100Kg Constant Load 2 HIL-4+2-R LH

SHACKLE BUSH KIT

Kit Contains: 8 x SPF2231 4 x SPF2240 1 PB59-1032K U-BOLT KIT

(1988 - 11/1997) Single Cab

5+2 Leaves (Heavy Duty) Raised Height (50mm Lift) 200Kg Constant Load 2 HIL-5+2-R LH Fitment of 2 left hand springs for the 105/106 Single Cab Model ONLY is correct

SHACKLE BUSH KIT Type B

Type C

Kit Contains: 12 x SPF2231 1 PB59-1033K Right Hand Side

Left Hand Side

Kit Contains: 1 x UB559-437 (Type B) 1 x UB59-449-3 (Type C) 1 UB59-449-3K Kit Contains: 2 x UB59-667 (Type B) 1 UB59-667K

U-BOLT KIT

Pre 07/1983 105/106 Single Cab (1988 - 11/1997)

SHOCK ABSORBER

Kit Contains: 2 x UB59-667 2 UB59-667K Kit Contains: 2 x UB59-453-2 2 UB59-453-2K

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-639 STEERING DAMPER

Comfort Option Twin Tube Gas Medium Load 2 GS59-649 Heavy Duty (Big Bore) Complete with Fittings 1 SD59-821 SHACKLE KIT

Extra Heavy Duty Twin Tube Gas (Big Bore) 350Kg Constant Load 2 GS59-651 SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-009

Greasable:Fit in Pairs 2 SK59-001 PIN KIT

Greasable: Fit in Pairs 2 SP59-005

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

PIN KIT

Greasable: Fit in Pairs 2 SP59-005 Raised Height measurements are listed as a guide only

JAN14 Rev.1

105

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

TOYOTA

4X4 MAKE:

TOYOTA

TYPE: Hilux

MODEL:

KZN/LN/RN 165/166/167

YEAR: 10/1997 - 2005

LN170 (2.4L TD), LN172 (3.0L D), RZN169

DETAIL: Single Cab, Dual Cab, Extra Cab Independent Front Suspension

TORSION BAR

PART NUMBER Price Code (if applicable)

REAR

QTY

FRONT

QTY

TOY-73

LEAF SPRING

PART NUMBER Price Code (if applicable)

Two Stage

3+2 Leaves Raised Height (50mm Lift) Medium Duty Up to 100Kg Constant Load 2 HIL-034-R 4+2 Leaves Raised Height (50mm Lift) Heavy Duty 200Kg Constant Load 2 HIL-035-R SHACKLE BUSH KIT

Heavy Duty Rate Increased Length 1064mm 1 TB59-1646

Kit Contains: 2 x SPF972 4 x SPF2231 4 x SPF2231A 1 PB59-1084K U-BOLT KIT

Kit Contains: 2 x UB59-453-2 2 UB59-453-2K

SHOCK ABSORBER

SHOCK ABSORBER

Comfort Option Twin Tube Gas Medium Load 2 GS59-649

Heavy Duty Twin Tube Gas 2 GS59-088

Extra Heavy Duty Twin Tube Gas (Big Bore) 350Kg Constant Load 2 GS59-651 SHACKLE KIT

STEERING DAMPER

Greasable: Fit in Pairs 2 SK59-010 PIN KIT

Heavy Duty Complete with Fittings 1 SD59-833

106

JAN14 Rev.1

Greasable: Fit in Pairs 2 SP59-060

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts Raised are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TOYOTA

TYPE:

Hilux

TOY-62

TOY-70

MODEL: LN/RN/YN 110, LN111 SR5 Independent Front Suspension YEAR: 1988 - 1997

MODEL: YEAR:

LN107 SR5, LN108, RN106 09/1991 - 2005

TORSION BAR

PART NUMBER Price Code (if applicable)

Single Cab , Dual Cab

REAR

QTY

FRONT

QTY

Extra Cab

TOYOTA

MAKE:

LEAF SPRING

PART NUMBER Price Code (if applicable)

Two Stage

3+2 Leaves Raised Height (45mm Lift) Medium Duty Up to 100Kg Constant Load 2 HIL-034-R 4+2 Leaves Raised Height (45mm Lift) Heavy Duty 200Kg Constant Load 2 HIL-035-R SHACKLE BUSH KIT

Heavy Duty Rate Increased Length 1064mm 1 TB59-1646

Kit Contains: 2 x SPF972 4 x SPF2231 4 x SPF2231A 1 PB59-1084K U-BOLT KIT

Kit Contains: 2 x UB59-453-2 2 UB59-453-2K

SHOCK ABSORBER

SHOCK ABSORBER

Comfort Option Twin Tube Gas Medium Load 2 GS59-649 Extra Heavy Duty Twin Tube Gas (Big Bore) 350Kg Constant Load 2 GS59-651 Heavy Duty Twin Tube Gas 2 GS59-088

SHACKLE KIT

STEERING DAMPER

Greasable: Fit in Pairs 2 SK59-010 PIN KIT

Heavy Duty Complete with Fittings 1 SD59-833

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-060

Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts Raised are listed as a guide only

JAN14 Rev.1

107

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TOYOTA

TYPE: Hilux, Vigo (150 Series)

MODEL: KUN / GGN 25 / 26 YEAR: 2005 on KZN 35 / 36 DETAIL: 4x4 Single Cab, 4x4 Extra Cab, 4x4 Dual Cab TOY-84

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

TOYOTA

MAKE:

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

It is a requirement that the Brake Adjuster BA59-002 be fitted when using these leaf springs

3+3 Leaves Raised Height (50mm Lift) Medium Duty Up to 100Kg Constant Load 2 L59-040-R

Vehicles fitted with this part number MUST be fitted with GS59-220 shock absorber.

Single Cab

4+3 Leaves Raised Height (50mm Lift) Heavy Duty 280Kg Constant Load 2 L59-041-R

4.0L V6 Petrol KUN26 3.0L TD

Linear Rate Standard Height Linear Rate Raised Height (40mm Lift) Linear Rate Raised Height (50mm Lift) Linear Rate Raised Height (50mm Lift) 50-100Kg Accessories (Bullbar and Winch) Extra Cab Dual Cab

1 C59-134

(B)

1 C59-296

(B)

1 C59-300

(B)

1 C59-302

(B)

5+3 Leaves Raised Height (50mm Lift) Super Heavy Duty 450Kg Constant Load 2 L59-042-R When using L59-040-R or L59-041-R, the longer leaf on the 2nd stage may be turned upside down to give a softer ride. Will reduce load carrying capacity.

SHACKLE BUSH KIT

Kit Contains: 4 x PB59-1501 4 x PB59-1502 2 x PB59-1503 1 PB59-1094K

GGN25 Petrol

Linear Rate Standard Height 1 C59-134

(B)

Linear Rate Raised Height (35mm Lift) 1 C59-300

(B)

Linear Rate Raised Height (50mm Lift) 1 C59-302

(B)

Linear Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bullbar and Winch) 1 C59-302

(B)

Extra Cab Dual Cab

U-BOLT KIT

KUN26 3.0L TD

Linear Rate Raised Height (45mm Lift) Up to 70Kg Accessories (Bullbar only) 1 C59-302 Linear Rate Raised Height (45mm Lift) 80 - 120Kg Accessories (Bullbar and Winch) 1 C59-350 SHOCK ABSORBER

Kit Contains: Suits: Suits: Suits:

L59-040-R L59-041-R L59-042-R

2 x UB59-453-2 2 UB59-453-2K 2 x UB59-453-2 2 UB59-453-2K 2 x UB59-437 2 UB59-437K

SHOCK ABSORBER

(B)

(B)

Comfort Option Twin Tube Gas Medium Load 2 GS59-649 Extra Heavy Duty Twin Tube Gas (Big Bore) 350Kg Constant Load 2 GS59-651 BRAKE ADJUSTER

Recommended when raising vehicle 1 BA59-002 Not required for vehicles with ABS Brake System

Heavy Duty Twin Tube Gas 2 GS59-220 STRUT CAP

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-053 PIN KIT

2 SC59-001

108

JAN14 Rev.2

Greasable: Fit in Pairs 2 SP59-060

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TOYOTA

TYPE: 4 Runner (1st Generation)

TOYOTA

MODEL: LN60, RN60, YN60

YEAR: Pre 08/1985

DETAIL: Leaf Spring Suspension TOY-59

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Single Stage

5 Leaves - Raised Height (50mm Lift) 1 HIL-001-F RH Petrol - No Accessories 1 HIL-001-F LH 5 Leaves - Raised Height (50mm Lift) Petrol - With Bull Bar OR Winch 1 HIL-002-F RH Diesel - No Accessories 1 HIL-002-F LH

REAR

QTY

QTY

FRONT

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

4+2 Leaves 1 TOY-470-R RH Raised Height (50mm Lift) 1 TOY-470-R LH SHACKLE BUSH KIT

5 Leaves - Raised Height (50mm Lift) 1 HIL-003-F RH Diesel - With Bull Bar OR Winch 1 HIL-003-F LH Kit Contains: 12 x SPF2231 1 PB59-1033K

SHACKLE BUSH KIT

Kit Contains: 8 x SPF2231 4 x SPF2240 1 PB59-1032K

U-BOLT KIT

U-BOLT KIT

Type B

Type C

Right Hand Side

Left Hand Side

Kit Contains: 1 x UB559-437 (Type B) 1 x UB59-449-3 (Type C) 1 UB59-449-3K

Kit Contains: 2 x UB59-667 2 UB59-667K SHOCK ABSORBER

Kit Contains: 2 x UB59-667 (Type B) 1 UB59-667K

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-639 STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-821

Comfort Option Twin Tube Gas Medium Load 2 GS59-649 Extra Heavy Duty Twin Tube Gas (Big Bore) 350Kg Constant Load 2 GS59-651

SHACKLE KIT

SHACKLE KIT

Greasable:Fit in Pairs 2 SK59-001

Greasable: Fit in Pairs 2 SK59-009 PIN KIT

PIN KIT

Greasable: Fit in Pairs 2 SP59-005

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-005

Raised Height measurements are listed as a guide only

JAN14 Rev.1

109

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TOYOTA

TYPE: 4 Runner

MODEL: LN61, YN63

YEAR: 08/1985 - 1989

DETAIL: Independent Front Suspension

TORSION BAR

PART NUMBER Price Code (if applicable)

REAR

QTY

FRONT

QTY

TOY-60

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

4+2 Leaves Raised Height (50mm Lift) 1 TOY-470-R RH Up to 100Kg Constant Load 1 TOY-470-R LH SHACKLE BUSH KIT

Heavy Duty Rate Increased Length 1064mm 1 TB59-1646

Kit Contains: 12 x SPF2231 1 PB59-1033K U-BOLT KIT

SHOCK ABSORBER

Kit Contains: 2 x UB59-667 2 UB59-667K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-088

STEERING DAMPER

Comfort Option Twin Tube Gas Medium Load 2 GS59-649 Extra Heavy Duty Twin Tube Gas (Big Bore) 350Kg Constant Load 2 GS59-651 SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-009 PIN KIT

Heavy Duty Complete with Fittings 1 SD59-833

110

JAN14 Rev.1

Greasable: Fit in Pairs 2 SP59-005

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TOYOTA

TYPE: 4 Runner (2nd Generation)

TOYOTA

TORSION BAR

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

MODEL: LN130, RN130, YN130, YEAR: 11/1989 - 1997 VZN130 (V6) DETAIL: Surf Independent Front Suspension TOY-63

COIL SPRING

(if applicable)

Heavy Duty Rate Increased Length 1064mm 1 TB59-1646

PART NUMBER Price Code

(if applicable)

Linear Rate Standard Height 1 C59-163

(B)

Linear Rate Raised Height (50mm Lift) 1 C59-161

(B)

Variable Rate Raised Height (50mm Lift) 1 C59-159V

(B)

Linear Rate Raised Height (50mm Lift) Extra Heavy Duty 150Kg Constant Load 1 C59-165

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-088 Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-225 STEERING DAMPER UNDER BODY BUSH KIT

Kit Includes Rear Under Body Bushes

Heavy Duty Complete with Fittings 1 SD59-833

2 x Rear Panhard Rod Bush 2 x Rear Trailing Arm Bush

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

1 PB59-1254K

JAN14 Rev.1

111

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

TOYOTA

4X4 MAKE:

TOYOTA

TYPE: 4 Runner / Surf (3rd Generation)

MODEL:

KZN185 3.0L TD

YEAR: 1996 - 2003

RZN185 2.7L Petrol, VZN185 3.4L V6

DETAIL: Station Wagon

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

TOY-83

PART NUMBER Price Code (if applicable)

RZN185 / VZN185 Linear Rate Standard Height 1 C59-132 Linear Rate Raised Height (20mm Lift) (Recommended) 1 C59-274 Linear Rate Raised Height (45mm Lift) 1 C59-276

Variable Rate Standard Height 1 C59-129V

(B)

(B)

Linear Rate Raised Height (40mm Lift) 1 C59-133

(B)

Linear Rate Raised Height (50mm Lift) 1 C59-131

(B)

(B)

(B)

KZN185 TD Linear Rate Standard Height 1 C59-274

(B)

Linear Rate Raised Height (30mm Lift) (Recommended) 1 C59-276

(B)

Linear Rate Raised Height (50mm Lift) 1 C59-134

(B)

Variable Rate Raised Height Heavy Duty 100Kg Constant Load 1 C59-137V

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-222

112

JAN14 Rev.1

Heavy Duty Twin Tube Gas 2 GS59-225

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: 4 Runner (4th Generation)

TOYOTA

TOYOTA

MODEL: GRN215, KDN215, YEAR: 2003 - 2009 TRN215 DETAIL: 4.0L V6 Petrol, 4.7L V8, 3.0L Diesel

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

4.0L V6 Petrol, 3.0L Diesel Linear Rate Raised Height (45mm Lift) 1 C59-300

(B)

4.7L V8 Linear Rate Raised Height (45mm Lift) 1 C59-302

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-221

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

QTY

FRONT

QTY

TOY-91

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (45mm Lift) 1 C59-325

(B)

Linear Rate Raised Height (45mm Lift) 100-300Kg Constant Load 1 C59-327

(B)

Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 300-400Kg Constant Load 1 C59-329

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-637

Raised Height measurements are listed as a guide only

JAN14

113

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TYPE: 4 Runner (5th Generation)

TOYOTA

YEAR: 2009 on

MODEL: GRN285 DETAIL: 4.0L V6 Petrol

COIL SPRING

PART NUMBER Price Code

Linear Rate Raised Height (45mm Lift) 50-100Kg Accessories (Bullbar and Winch) 1 C59-302

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-700

JAN14

COIL SPRING

(if applicable)

Linear Rate Raised Height (45mm Lift) 1 C59-300

114

REAR

(B)

(B)

QTY

FRONT

QTY

TOY-102

PART NUMBER Price Code (if applicable)

Linear Rate Raised Height (45mm Lift) 1 C59-325

(B)

Linear Rate Raised Height (45mm Lift) 100-300Kg Constant Load 1 C59-327

(B)

Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 300-400Kg Constant Load 1 C59-329

(B)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-701

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Tacoma (240 Series)

TOYOTA

TOYOTA

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

MODEL: TRN / GRN YEAR: 2005 on 240, 245, 250 DETAIL: Single Cab, Extra Cab, Dual Cab 4x4 TOY-103

LEAF SPRING

(if applicable)

PART NUMBER Price Code

(if applicable)

Two Stage

3+2 Leaves Raised Height (55mm Lift) Medium Duty 2 L59-110-R

Single Cab 2.7L Linear Rate Raised Height (45mm Lift) No Accessories 1 C59-238

(C)

Linear Rate Raised Height (50mm Lift) 80-120kg Accessories 1 C59-300

(B)

SHACKLE BUSH KIT

Kit Contains: 6 x PB59-1503 1 PB59-1101K

Dual Cab 4.0L Linear Rate Raised Height (40mm Lift) No Accessories 1 C59-302

(B)

Linear Rate Raised Height (45mm Lift) 80-120kg Accessories 1 C59-314

(B)

U-BOLT KIT

Kit Contains: 2 x UB59-453-2 2 UB59-453-2K

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Gas 2 GS59-221 Heavy Duty Gas 2 GS59-940B

STRUT CAP PIN KIT

2 SC59-001

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-060

Raised Height measurements are listed as a guide only

JAN14 Rev.1

115

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TOYOTA

TYPE: Tundra

MODEL: UCK55, UPK55, USK55, UCK56, UPK56, USK56 DETAIL: 4.7L, 5.7L Pickup 4x4

YEAR: 03/2007 on

PART NUMBER

REAR

QTY

FRONT

QTY

TOY-104

Price Code

PART NUMBER Price Code

(if applicable)

(if applicable)

COIL SPRING

LEAF SPRING Two Stage

4+2 Leaves Raised Height (55mm Lift) Heavy Duty 2 L59-120-R

SHACKLE BUSH KIT

Linear Rate Standard Height 2 C59-478

Linear Rate Raised Height (55mm Lift) 2 C59-610

(C)

Kit Contains: 2 x PB59-1540 2 x PB59-1503 2 x PB59-1514 1 PB59-1102K

(B)

U-BOLT KIT

SHOCK ABSORBER

Kit Contains: 2 x UB59-437 2 UB59-437K SHOCK ABSORBER

Heavy Duty Gas 2 GS59-711

PIN KIT

Heavy Duty Gas 2 GS59-710

116

JAN14

Greasable: Fit in Pairs 2 SP59-060

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Sequoia

MODEL: UCK65 4.7L USK65 5.7L DETAIL: 4x4 Station Wagon

YEAR: 2008 on

TOY-105

COIL SPRING

QTY

Does Not Suit Airbag Suspension

FRONT

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (45mm Lift) 1 C59-476

TOYOTA

TOYOTA

(B)

SHOCK ABSORBER

Heavy Duty Gas 2 GS59-710

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

QTY

MAKE:

PART NUMBER Price Code

(if applicable)

Linear Rate Raised Height (45mm Lift) 1 C59-477

(C)

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-713

Raised Height measurements are listed as a guide only

JAN14 Rev.2

117

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TYPE: Landcruiser 40 Series

TOYOTA

MODEL: BJ40, FJ40, HJ40

YEAR: 1960 - 1980

DETAIL: SWB 25mm Spring Eye

LEAF SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

TOY-50

Price Code

LEAF SPRING

(if applicable)

Single Stage

PART NUMBER (if applicable)

Single Stage

25mm Spring Eye

25mm Spring Eye

7 Leaves Raised Height (45mm Lift) 2 HJ40-7L-F

6 Leaves Raised Height (45mm Lift) 25mm Longer Main Leaf 2 TOY-034-R

7 Leaves Raised Height (45mm Lift) 200Kg Accessories (Bull Bar and Winch) 2 HJ45-7L-F

7 Leaves Raised Height (50mm Lift) 150Kg Constant Load 25mm Longer Main Leaf 2 TOY-029-R

SHACKLE BUSH KIT

Kit Contains: 12 x SPF2230 1 PB59-1013K

SHACKLE BUSH KIT

Kit Contains: 12 x SPF2230 1 PB59-1013K

U-BOLT KIT

U-BOLT KIT

Kit Contains: 1 x UB59-453-1 1 x UB59-453-3 1 UB59-450K

Right Hand Side

Kit Contains: 2 x UB59-453-3 1 UB59-453-3K

Left Hand Side

Kit Contains: 2 x UB59-453-3 2 UB59-453-3K SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-635 Pre 01/1975

STEERING DAMPER

Heavy Duty Twin Tube Gas 2 GS59-635 01/1975 on

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-823

Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-651 SHACKLE KIT

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-002

Greasable: Fit in Pairs 2 SK59-002 PIN KIT

PIN KIT

Greasable: Fit in Pairs 2 SP59-006

118

JAN14 Rev.1

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-006

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Landcruiser 40 Series

TOYOTA

TOYOTA

MODEL: BJ42, FJ40

YEAR: 1980 - 1984

DETAIL: SWB 35mm Spring Eye TOY-52

PART NUMBER

REAR

Price Code

LEAF SPRING

QTY

QTY

FRONT

Price Code

LEAF SPRING

(if applicable)

Single Stage

PART NUMBER (if applicable)

Single Stage

35mm Spring Eye

35mm Spring Eye

7 Leaves Raised Height (45mm Lift) 2 BJ42-7L-F

6 Leaves Raised Height (50mm Lift) 25mm Longer Main Leaf 2 TOY-035-R

7 Leaves Raised Height (45mm Lift) 200Kg Accessories (Bull Bar and Winch) 2 HJ47-7L-F

7 Leaves Raised Height (50mm Lift) Heavy Duty 150Kg Constant Load 25mm Longer Main Leaf 2 TOY-036-R

SHACKLE BUSH KIT

Kit Contains: 12 x SPF2260 1 PB59-1019K

SHACKLE BUSH KIT

U-BOLT KIT

Type A

Kit Contains: 12 x SPF2260 1 PB59-1019K

Type B

U-BOLT KIT Right Hand Side

Left Hand Side

Kit Contains: 1 x UB59-453-3 (Type A) 1 x UB59-449 (Type B) 1 UB59-449K

Kit Contains: 2 x UB59-453-3 2 UB59-453-3K

Kit Contains: 2 x UB59-453-3 (Type A) 1 UB59-453-3K

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-651

Heavy Duty Twin Tube Gas 2 GS59-635 STEERING DAMPER

SHACKLE KIT

Greasable: Fit in Pairs Heavy Duty (Big Bore) Complete with Fittings 1 SD59-823

Right Hand Side 1 SK59-013 Left Hand Side 1 SK59-014

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-003

Use HJ47 Shackle Kits (Left & Right). Slightly longer than original. Assists lift on the rear.

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

PIN KIT

Greasable: Fit in Pairs 2 SP59-007 Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-007 Raised Height measurements are listed as a guide only

JAN14 Rev.1

119

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TYPE: Landcruiser 45 Series

TOYOTA

MODEL: FJ45, HJ45

YEAR: Pre 08/1980

DETAIL: LWB Pickup, Troop Carrier Note Spring Eye Sizes

LEAF SPRING

PART NUMBER Price Code (if applicable)

Single Stage

REAR

QTY

FRONT

QTY

TOY-53

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

25mm Spring Eye

30mm Spring Eye

7 Leaves Raised Height (40mm Lift) No Accessories 2 HJ45-7L-F

6+3 Leaves 1 HJ45-6+3-R RH Raised Height (40mm Lift) 1 HJ45-6+3-R LH

8 Leaves Raised Height (40mm Lift) Heavy Duty 50-80Kg Accessories (Bull Bar and Winch) (Recommended) 2 HJ45-8L-F

7+3 Leaves Raised Height (40mm Lift) Heavy Duty 1 HJ45-7+3-R RH 200Kg Constant Load 1 HJ45-7+3-R LH

SHACKLE BUSH KIT

SHACKLE BUSH KIT

Kit Contains: 12 x SPF2230 1 PB59-1013K

Kit Contains: 12 x SPF2231A 1 PB59-1014K

U-BOLT KIT U-BOLT KIT

Kit Contains: 1 x UB59-453-1 1 x UB59-453-3 1 UB59-450K

Right Hand Side

Kit Contains: 2 x UB59-453-1 2 UB59-453-1K

Kit Contains: 2 x UB59-453-3 1 UB59-453-3K

Left Hand Side

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-635 STEERING DAMPER

Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-651 Heavy Duty (Big Bore) Complete with Fittings 1 SD59-823

SHACKLE KIT

Greasable: Fit in Pairs

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-002 PIN KIT

Right Hand Side 1 SK59-016 Left Hand Side 1 SK59-015 PIN KIT

Fit in Pairs 2 SP59-006 120

JAN14 Rev.1

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Fit in Pairs 2 SP59-022

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Landcruiser 45 Series

TOYOTA

TOYOTA

MODEL: FJ45, HJ47, BJ45, BJ46

YEAR: 07/1980 - 1985

DETAIL: LWB Pickup, Troop Carrier 35mm Spring Eye TOY-54

PART NUMBER

REAR

Price Code

LEAF SPRING

QTY

QTY

FRONT

Price Code

LEAF SPRING

(if applicable)

Single Stage

PART NUMBER (if applicable)

Two Stage

35mm Spring Eye

35mm Spring Eye

7 Leaves Raised Height (40mm Lift) 2 HJ47-7L-F

6+3 Leaves 1 HJ47-6+3-R RH Raised Height (40mm Lift) 1 HJ47-6+3-R LH

8 Leaves Raised Height (40mm Lift) Heavy Duty 40Kg Accessories (Bull Bar OR Winch) (Recommended) 2 HJ47-8L-F

7+3 Leaves Raised Height (40mm Lift) Heavy Duty 1 HJ47-7+3-R RH 200Kg Constant Load 1 HJ47-7+3-R LH

SHACKLE BUSH KIT

Kit Contains: 12 x SPF2260 1 PB59-1019K

SHACKLE BUSH KIT

Kit Contains: 12 x SPF2260 1 PB59-1019K

U-BOLT KIT Type A

Type B

U-BOLT KIT Right Hand Side

Left Hand Side

Kit Contains: 1 x UB59-453-3 (Type A) 1 x UB59-449 (Type B) 1 UB59-449K

Kit Contains: 2 x UB59-453-1 2 UB59-453-1K

Kit Contains: 2 x UB59-453-3 (Type A) 1 UB59-453-3K

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-635 STEERING DAMPER

Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-651 SHACKLE KIT

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-823

Greasable: Fit in Pairs Right Hand Side 1 SK59-013 Left Hand Side 1 SK59-014

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-003 Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

PIN KIT

Greasable: Fit in Pairs 2 SP59-007 Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-007

Raised Height measurements are listed as a guide only

JAN14 Rev.1

121

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TYPE: Landcruiser 75 Series

TOYOTA

MODEL: FJ75, HJ75, BJ75

YEAR: 11/1984 - 01/1990

DETAIL: Pickup, Troop Carrier

LEAF SPRING

PART NUMBER Price Code (if applicable)

Single Stage

REAR

QTY

FRONT

QTY

TOY-58

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Two Stage

It is a requirement that the Brake Adjuster BA59-001 be fitted when using these leaf springs

7 Leaves Raised Height (45mm Lift) No Accessories 2 HJ75-7L-F 8 Leaves Raised Height (50mm Lift) Heavy Duty 40 - 70Kg Accessories (Bull Bar OR Winch) (Recommended) 2 HJ75-8L-F SHACKLE BUSH KIT

6+2 Leaves Raised Height (50mm Lift) Up to 100Kg Constant Load 2 HJ75-6+2-R 7+2 Leaves Raised Height (50mm Lift) Heavy Duty 300Kg Constant Load 2 HJ75-7+2-R 8+2 Leaves Raised Height (50mm Lift) Super Heavy Duty 500Kg Constant Load 2 HJ75-8+2-R SHACKLE BUSH KIT

Kit Contains: 12 x SPF2270 1 PB59-1020K

Kit Contains: 12 x SPF2260 1 PB59-1019K U-BOLT KIT

U-BOLT KIT

Kit Contains: 2 x UB59-453-1 2 UB59-453-1K Kit Contains: 2 x UB59-668 2 UB59-668K

SHOCK ABSORBER

SHOCK ABSORBER

Soft Option Twin Tube Gas (Big Bore) Not For Loaded Vehicles 2 GS45-115 Heavy Duty Twin Tube Gas 2 GS59-637 STEERING DAMPER

Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-079 Heavy Duty Twin Tube Gas (Big Bore) Long Travel 2 GS59-703 BRAKE ADJUSTER

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Recommended when raising vehicle 1 BA59-001 SHACKLE KIT

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-003 Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

Greasable: Fit in Pairs 2 SK59-019 Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

Greasable: Fit in Pairs 2 SP59-007 122

JAN14

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-023 Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Landcruiser 75 Series

TOYOTA

TOYOTA

MODEL: FZJ75, HZJ75

YEAR: 1990 - 09/1999

DETAIL: Pickup, Troop Carrier. Disc Brake Rear End For model with Rear Drum Brake (Pre 10/1991)

LEAF SPRING

TOY-67

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

use rear spring part number HJ75-6+2-R

Price Code

LEAF SPRING

(if applicable)

Single Stage

PART NUMBER (if applicable)

Two Stage

It is a requirement that the Brake Adjuster BA59-001 be fitted when using these leaf springs

7 Leaves Raised Height (45mm Lift) No Accessories 2 HZJ75-7L-F

6+2 Leaves Raised Height (50mm Lift) Up to 100Kg Constant Load 2 HZJ75-6+2-R 7+2 Leaves Raised Height (50mm Lift) Heavy Duty 300Kg Constant Load 2 HZJ75-7+2-R 8+2 Leaves Raised Height (50mm Lift) Super Heavy Duty 500Kg Constant Load 2 HZJ75-8+2-R

8 Leaves Raised Height (50mm Lift) Heavy Duty 40 - 70Kg Accessories (Bull Bar OR Winch) (Recommended) 2 HZJ75-8L-F SHACKLE BUSH KIT

SHACKLE BUSH KIT

Kit Contains: 12 x SPF2270 1 PB59-1020K

Kit Contains: 12 x SPF2260 1 PB59-1019K U-BOLT KIT

U-BOLT KIT

Kit Contains: 2 x UB59-453-1 2 UB59-453-1K SHOCK ABSORBER

Kit Contains: 2 x UB59-668 2 UB59-668K SHOCK ABSORBER

Soft Option Twin Tube Gas (Big Bore) Not For Loaded Vehicles 2 GS45-115 Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-079 Heavy Duty Twin Tube Gas (Big Bore) Long Travel 2 GS59-703

Heavy Duty Twin Tube Gas 2 GS59-637 STEERING DAMPER

BRAKE ADJUSTER

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Recommended when raising vehicle 1 BA59-001

SHACKLE KIT

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-020

Greasable: Fit in Pairs 2 SK59-018 Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

Greasable: Fit in Pairs 2 SP59-007 Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-023 Raised Height measurements are listed as a guide only

JAN14

123

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

TOYOTA

TYPE:

Landcruiser 78 Series Front Coil Spring Suspension

TOY-78

TOY-78

TOY-78

MODEL: FZJ79, HZJ79

MODEL: FZJ79, HZJ79, HDJ79, VDJ79

MODEL: FZJ79, HZJ79, HDJ79,VDJ79

YEAR:

YEAR:

YEAR:

FRONT COIL SPRING

09/1999 - 04/2007 Pickup

04/2007 on 4.5 L Turbo Diesel Pickup

PART NUMBER

4.5 L Turbo Diesel Dualcab

REAR

Price Code

(if applicable)

Two Stage

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-114 STEERING DAMPER

(B)

(B)

(B)

It is a requirement that the Brake Adjuster BA59-001 be fitted when using these leaf springs

6 + 2 Leaves - Comfort Spring Raised Height (45mm Lift) No Load 6 + 2 Leaves - Standard Duty Raised Height (50mm Lift) Up to 100Kg Constant Load 7 + 2 Leaves - Heavy Duty Raised Height (50mm Lift) 300Kg Constant Load 8 + 2 Leaves - Super Heavy Duty Raised Height (50mm Lift) 500Kg Constant Load 9 + 2 Leaves - Super Heavy Duty Raised Height (50mm Lift) 800Kg Constant Load 8 + 3 Leaves - Super Heavy Duty Raised Height (50mm Lift) 1,200 Kg Constant Load

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

2 TOY-078-R

2 TOY-082-R 2 TOY-083-R 2 TOY-084-R 2 TOY-085-R

2 TOY-088-R

SHACKLE BUSH KIT Kit Contains: 4 x PB59-1509 PB59-1089K 4 x SPF1782 1 pre 07/2009 Kit Contains: 8 x SPF1798 PB59-1100K 4 x SPF1781 1 08/2009 on U-BOLT KIT

FZJ79, HZJ79 (to 04/2007)

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Linear Rate Standard Height Up to 50 Kg Accessories (Bull Bar OR Winch) 1 C59-250 Linear Rate Raised Height (35mm Lift) Up to 50 Kg Accessories (Bull Bar OR Winch) 1 C59-248 Linear Rate Raised Height (35mm Lift) Super Heavy Duty 50 - 110Kg Accessories (Bull Bar and Winch) 1 C59-252

07/2012 on

QTY

MAKE:

QTY

TOYOTA

4X4

TOY-078-R TOY-082-R TOY-083-R TOY-084-R TOY-085-R TOY-088-R

Kit Contains: 2 x UB59-453-1 2 x UB59-453-1 2 x UB59-416 2 X UB59-416 2 x UB59-914 2 x UB59-914

2 2 2 2 2 2

UB59-453-1K UB59-453-1K UB59-416K UB59-416K UB59-914K UB59-914K

SHOCK ABSORBER FZJ79, HZJ79, VDJ79 (04/2007 on)

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-825 UNDER BODY BUSH KIT

Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-079 Heavy Duty Twin Tube Gas (Big Bore) Long Travel 2 GS59-703

Kit Includes Front Under Body Bushes

2 x Front Panhard Rod Bush 2 x Front Leading Arm to Diff Bush 4 x Front Leading Arm to Chassis Bush

BRAKE ADJUSTER

1 PB59-1261K

1 PB59-503K

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

124

JAN14 Rev.1

Recommended when raising vehicle 1 BA59-001 Not required for vehicles with ABS Brake System SHACKLE KIT

CASTOR KIT Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

Soft Option Twin Tube Gas (Big Bore) Not For Loaded Vehicles 2 GS45-115

to 07/2009

Greasable: Fit in Pairs 2 SK59-043

08/2009 on Air Bag Dash

Greasable: Fit in Pairs 2 SK59-051

PIN KIT to 07/2009 Greasable: Fit in Pairs 2 SP59-044 08/2009 on Air Bag Dash

Greasable: Fit in Pairs 2 SP59-057

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised R Rai aised d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TOYOTA

TYPE: Landcruiser 78 Series

TOYOTA

MODEL: FZJ78, HZJ78 (Year: 09/1999 - 04/2007) FZJ78, HZJ78, VDJ78 V8 Diesel (Year: 04/2007 on) DETAIL: Troop Carrier

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

TOY-81

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

It is a requirement that the Brake Adjuster BA59-001 be fitted when using these leaf springs

6+2 Leaves Raised Height (50mm Lift) Medium Duty Up to 100Kg Constant Load 2 TOY-082-R

Linear Rate Standard Height Up to 50 Kg Accessories (Bullbar OR Winch) 1 C59-250 Linear Rate Raised Height (35mm Lift) Up to 50 Kg Accessories (Bullbar OR Winch) 1 C59-248 Linear Rate Raised Height (35mm Lift) Super Heavy Duty 50-110Kg Accessories (Bullbar and Winch) 1 C59-252

(B)

7+2 Leaves Raised Height (50mm Lift) Heavy Duty 300Kg Constant Load 2 TOY-083-R

(B)

8+2 Leaves Raised Height (50mm Lift) Super Heavy Duty 500Kg Constant Load 2 TOY-084-R SHACKLE BUSH KIT Kit Contains: 4 x SPF1781 PB59-1090K 2 x SPF1782 4 x SPF1798 1 pre 07/2009

(B)

SHOCK ABSORBER

Kit Contains: 8 x SPF1798 PB59-1100K 4 x SPF1781 1 08/2009 on U-BOLT KIT

Heavy Duty Twin Tube Gas 2 GS45-114 STEERING DAMPER

Kit Contains: FZJ78, HZJ78 (to 04/2007)

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Suits: Suits: Suits:

TOY-082-R TOY-083-R TOY-084-R

2 x UB59-453-1 2 UB59-453-1K 2 x UB59-416 2 UB59-416K 2 x UB59-416 2 UB59-416K

SHOCK ABSORBER

FZJ78, HZJ78, VDJ78 (04/2007 on)

Soft Option Twin Tube Gas (Big Bore) Not For Loaded Vehicles 2 GS45-115

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-825 UNDER BODY BUSH KIT

Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-079 Heavy Duty Twin Tube Gas (Big Bore) Long Travel 2 GS59-703 BRAKE ADJUSTER

Kit Includes Front Under Body Bushes

2 x Front Panhard Rod Bush 2 x Front Leading Arm to Diff Bush 4 x Front Leading Arm to Chassis Bush

1 PB59-1261K

Recommended when raising vehicle 1 BA59-001 Not required for vehicles with ABS Brake System

CASTOR KIT

SHACKLE KIT

Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

PIN KIT

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

Greasable: Fit in Pairs 2 SK59-051

1 PB59-503K

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

to 07/2009

Greasable: Fit in Pairs 2 SP59-044

08/2009 on Air Bag Dash

Greasable: Fit in Pairs 2 SP59-057

Raised R Rai aised d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts are listed as a guide only

JAN14 Rev.1

125

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TOYOTA

TYPE: Landcruiser 70 Series

MODEL: FZJ76, HZJ76, VDJ76

YEAR: 04/2007 on

DETAIL: Station Wagon V8 Turbo Diesel

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

TOY-95

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

4+2 Leaves Raised Height (45mm Lift) Medium Duty Up to 100Kg Constant Load 2 L59-020-R Variable Rate Standard Height 1 C59-454V Linear Rate Raised Height (40mm Lift) Comfort Option No Accessories 1 C59-246 Linear Rate Raised Height (40mm Lift) 1 C59-250 Linear Rate Raised Height (55mm Lift) Up to 80 Kg Accessories (Bullbar OR Winch) 1 C59-248 Linear Rate Raised Height (50mm Lift) Super Heavy Duty 80-110Kg Accessories (Bullbar and Winch) 1 C59-252

5+2 Leaves Raised Height (50mm Lift) Heavy Duty 300Kg Constant Load 2 L59-021-R

(B)

(B)

6+2 Leaves Raised Height (50mm Lift) Super Heavy Duty 450Kg Constant Load 2 L59-022-R

(B)

SHACKLE BUSH KIT

(B)

Kit Contains: 4 x SPF1781 2 x SPF1782 4 x SPF1798 1 PB59-1090K

(B)

SHOCK ABSORBER U-BOLT KIT

Kit Contains:

Heavy Duty Twin Tube Gas 2 GS45-114 Suits: Suits: Suits:

STEERING DAMPER

L59-020-R L59-021-R L59-022-R

2 x UB59-453-3 2 UB59-453-3K 2 x UB59-453-3 2 UB59-453-3K 2 x UB59-453-1 2 UB59-453-1K

SHOCK ABSORBER

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-825

Twin Tube Gas Softer Option (Big Bore) 2 GS45-115

UNDER BODY BUSH KIT

Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-079

Kit Includes Front Under Body Bushes

2 x Front Panhard Rod Bush 2 x Front Leading Arm to Diff Bush 4 x Front Leading Arm to Chassis Bush

1 PB59-1261K

Heavy Duty Twin Tube Gas Long Travel (Big Bore) 2 GS59-703 SHACKLE KIT

CASTOR KIT Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

1 PB59-503K

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

PIN KIT

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

126

JAN14

Greasable: Fit in Pairs 2 SK59-051

Greasable: Fit in Pairs 2 SP59-044

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Landcruiser 60 Series

TOYOTA

TOYOTA

MODEL: FJ60, FJ62, HJ60, HJ61

YEAR: 1980 - 1990

DETAIL: Station Wagon

LEAF SPRING

PART NUMBER

REAR

Price Code

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Single Stage

(if applicable)

Single Stage

5 Leaves Raised Height (45mm Lift) Petrol (No Accessories) 2 HJ60-5L-F 6 Leaves Raised Height (45mm Lift) Petrol - With Accessories Diesel (No Accessories) 2 HJ61-6L-F 7 Leaves Raised Height (45mm Lift) Diesel - 50 - 100Kg Accessories 2 HJ61-7L-F HJ61 Turbo Diesel

QTY

FRONT

QTY

TOY-55

For LH Drive vehicles fit the higher camber spring to the LH side of the vehicle

7 Leaves Raised Height (50mm Lift) 1 HJ61-7L-R RH Plus 1 Spacer Leaf (top of spring pack) 1 HJ61-7L-R LH HJ61 Turbo Diesel 7 Leaves Raised Height (45mm Lift) 1 HJ61-7L-R RH Plus 1 Spacer Leaf (bottom of spring pack) 1 HJ61-7L-R LH

7 Leaves Raised Height (45mm Lift) 2 HJ61-7L-F

8 Leaves Raised Height (45mm Lift) Heavy Duty 1 HJ61-8L-R RH 300Kg Constant Load 1 HJ61-8L-R LH SHACKLE BUSH KIT

SHACKLE BUSH KIT

Kit Contains: 12 x SPF2260 1 PB59-1019K

Kit Contains: 12 x SPF2260 1 PB59-1019K U-BOLT KIT

U-BOLT KIT

Kit Contains: 2 x UB59-453-1 2 UB59-453-1K

Kit Contains: 2 x UB59-436 2 UB59-436K

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-637 Comfort Option Twin Tube Gas 2 GS59-649

STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-651 SHACKLE KIT

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-019 Greasable: Fit in Pairs 2 SK59-003 Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

PIN KIT

Greasable: Fit in Pairs 2 SP59-007 Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-007

Raised Height measurements are listed as a guide only

JAN14 Rev.1

127

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TYPE: Landcruiser 80 Series

TOYOTA

MODEL: FJ80, HDJ80, HZJ80

YEAR: 05/1990 - 08/1991

DETAIL: Station Wagon

COIL SPRING

PART NUMBER

REAR

Price Code

Linear Rate Raised Height (45mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) (Recommended) 1 C59-166 Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 50-110Kg Accessories (Bull Bar and Winch) 1 C59-170

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Standard Height 1 C59-168

QTY

FRONT

QTY

TOY-68

(if applicable)

(B)

Linear Rate Standard Height 1 C59-169

(B)

(B)

Linear Rate Raised Height (45mm Lift) Up to 100Kg Constant Load (Recommended) 1 C59-167

(B)

Variable Rate Raised Height (45mm Lift) Up to 100Kg Constant Load 1 C59-175V

(B)

Linear Rate Raised Height (45mm Lift) Extra Heavy Duty 350Kg Constant Load 1 C59-171

(C)

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-683 STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824 Heavy Duty Twin Tube Gas 2 GS59-682

UNDER BODY BUSH KIT

UNDER BODY BUSH KIT See Rear Under Body Bush Kit Kit Includes Front & Rear Under Body Bushes

CASTOR KIT Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

1 PB59-503K

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

128

JAN14 Rev.1

2 4 2 4 4 2

x x x x x x

Front Radius Arm to Chassis Bush Front Leading Arm Bush Front Panhard Rod Bush Rear Upper Trailing Arm Bush Rear Lower Trailing Arm Bush Rear Panhard Rod Bush BRAKE ADJUSTER

Recommended when raising vehicle (Suits 2” - 3” Lift)

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

1 PB59-1258K 1 BA45-005

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Landcruiser 80 Series

TOYOTA

TOYOTA

MODEL: FJ80, FZJ80, HZJ80

YEAR: 08/1991 - 1998

DETAIL: Station Wagon

COIL SPRING

OR

Variable Rate Standard Height Variable Rate Raised Height (40mm Lift) Up to 50Kg Accessories (Bullbar OR Winch) Variable Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bullbar and Winch) Linear Rate Standard Height Linear Rate Raised Height (45mm Lift) Up to 50Kg Accessories (Bullbar OR Winch) (Recommended) Linear Rate Raised Height (45mm Lift) Up to 100Kg Accessories Raised Height (60mm Lift) No Accessories Linear Rate Raised Height (75mm Lift) Up to 50Kg Accessories (Bullbar OR Winch) Linear Rate Raised Height (40mm Lift) Comfort Spring - Petrol Only Up to 50Kg Accessories (Bullbar OR Winch)

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

1 C59-210V

(B)

1 C59-220V

(B)

1 C59-222V

(B)

1 C59-174

(B)

1 C59-168

Variable Rate Standard Height Variable Rate Raised Height (45mm Lift) Comfort Spring - Petrol Only No Load Linear Rate Standard Height Linear Rate Raised Height (45mm Lift) Up to 100Kg Constant Load (Recommended)

(B)

1 C59-166

(B)

1 C59-176

(B)

1 C59-234

(B)

QTY

FRONT

QTY

TOY-69

PART NUMBER Price Code

(if applicable)

1 C59-221V

(B)

1 C59-269V

(B)

1 C59-243

(B)

1 C59-169

(B)

Linear Rate Raised Height (60mm Lift) Up to 100Kg Constant Load 1 C59-167 Linear Rate Raised Height (75mm Lift) Up to 100Kg Constant Load 1 C59-185 Variable Rate Raised Height (45mm Lift) Up to 100Kg Constant Load 1 C59-223V Linear Rate Raised Height (50mm Lift) 350Kg Constant Load 1 C59-171

SHOCK ABSORBER

(B)

(C)

(B)

(C)

SHOCK ABSORBER Heavy Duty Twin Tube Gas 2 GS59-683 STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Heavy Duty Twin Tube Gas 2 GS59-682 UNDER BODY BUSH KIT

UNDER BODY BUSH KIT

See Rear Under Body Bush Kit Kit Includes Front & Rear Under Body Bushes

CASTOR KIT Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

1 PB59-503K

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

2 4 2 4 4 2

x x x x x x

Front Radius Arm to Chassis Bush Front Leading Arm Bush Front Panhard Rod Bush Rear Upper Trailing Arm Bush Rear Lower Trailing Arm Bush Rear Panhard Rod Bush BRAKE ADJUSTER

Recommended when raising vehicle (Suits 2” - 3” Lift)

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

1 PB59-1258K 1 BA45-005

JAN14

129

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Landcruiser

TOYOTA

MODEL: FZJ/HZJ/HDJ 80/105

YEAR: 08/1991 on

DETAIL: Station Wagon 100mm (4” Lift) 150mm (6” Lift) PART NUMBER

REAR

Price Code

COIL SPRING

QTY

FRONT

TOY-88

QTY

TOYOTA

MAKE:

Price Code

COIL SPRING

(if applicable)

(if applicable)

Linear Rate Raised Height (4” Lift) 1

C59-170

(B)

Linear Rate Raised Height (4” Lift) Extra Heavy Duty 1

C59-308

(C)

Linear Rate Raised Height (6” Lift) 1

C59-310

(C)

SHOCK ABSORBER

PART NUMBER

Linear Rate Raised Height (4” Lift) 1

C59-171

(C)

Linear Rate Raised Height (4” Lift) Extra Heavy Duty 1

C59-309

(C)

C59-317

(B)

C59-311

(C)

Linear Rate Raised Height (6” Lift) No LOad 1 Linear Rate Raised Height (6” Lift) Extra Heavy Duty 400Kg Constant Load 1

SHOCK ABSORBER

100mm (4” Lift)

Heavy Duty Twin Tube Gas 2 GS59-687

150mm (6” Lift)

Heavy Duty Twin Tube Gas 2 GS59-685

UNDER BODY BUSH KIT

100mm (4” Lift)

Heavy Duty Twin Tube Gas 2 GS45-912

150mm (6” Lift)

Heavy Duty Twin Tube Gas 2 GS59-684

2 4 2 4 4 2

x x x x x x

STEERING DAMPER

Kit Includes Front & Rear Under Body Bushes Front Radius Arm to Chassis Bush Front Leading Arm Bush Front Panhard Rod Bush Rear Upper Trailing Arm Bush Rear Lower Trailing Arm Bush Rear Panhard Rod Bush

1

PB59-1258K

ADJUSTABLE PANHARD RODS Complete with Bushes 1

Heavy Duty (Big Bore) Complete with Fittings 1

PR59-1405

ALIGNMENT PARTS SD59-824

* Check Swaybar Link Configuration - 80 Series require either SE59-517 or SE59-519. All 105 Series require SE59-519. Adjustable Swaybar Extension (Suits 4” - 6” Lift) Side of Chassis Mount 2* SE59-517

ADJUSTABLE PANHARD RODS

Adjustable Swaybar Extension (Suits 4” - 6” Lift) Bottom of Chassis Mount 2* SE59-519 RH Drive LH Drive

Complete with Bushes 1 Complete with Bushes 1

PR59-1404 PR59-1408

BRAKE ADJUSTER Recommended when raising vehicle (Suits 2” - 6” Lift) 1

CASTOR KIT

WARNING - 100MM (4”) OR 150MM (6”) LIFT

Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

The suspension components listed on this page are for off-road use only 1

PB59-503K

1

RB59-522K

… Refer to Local Laws before fitting to Registered/Road vehicles … An Engineering Certificate may be required … Handling characteristics will diminish on lifts above 50mm (2”)

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

CASTOR PLATE KIT 5° Castor Plate Kit (Suits both arms)

1

WA59-514K

2

SE59-516

SWAYBAR EXTENSIONS Adjustable Swaybar Extension (Suits 4” - 6” Lift)

130

JAN14

BA45-005

• • • •

The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted Adjustable Panhard Rods Modified Leading / Trailing Arms Brake Hoses Extended Bump Stops

• • •

Gear Box & Drive Line Modifications Steering Arms Swaybar Modification

Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page. These products do not come with any warranty or guarantee.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Landcruiser 100 Series

TOYOTA

TOYOTA

MODEL: FZJ105R, HZJ105R

YEAR: 04/1998 - 11-2007

DETAIL: Station Wagon GX and GXL Coil Spring Suspension

COIL SPRING

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Standard Height 1 C59-174 Linear Rate Raised Height (40mm Lift) Comfort Spring Petrol Only Up to 50Kg Accessories (Bullbar OR Winch) 1 C59-234 Linear Rate Raised Height (45mm Lift) Up to 50Kg Accessories (Bullbar OR Winch) (Recommended) 1 C59-168 Linear Rate Raised Height (75mm Lift) Up to 50Kg Accessories (Bullbar OR Winch) 1 C59-176

OR

REAR

Linear Rate Raised Height (45mm Lift) 60-100Kg Accessories Raised Height (60mm Lift) No Accessories 1 C59-166

QTY

FRONT

QTY

TOY-74

PART NUMBER Price Code

(if applicable)

(B)

(B)

Variable Rate Standard Height 1 C59-221V

(B)

Variable Rate Raised Height (45mm Lift) Comfort Spring - Petrol Only No Load 1 C59-269V

(B)

(B)

Linear Rate Standard Height 1 C59-243

(B)

(B)

Linear Rate Raised Height (45mm Lift) Up to 100Kg Constant Load (Recommended) 1 C59-169

(B)

Linear Rate Raised Height (75mm Lift) Up to 100Kg Constant Load 1 C59-185

(C)

Linear Rate Raised Height (45mm Lift) 60-100Kg Constant Load Raised Height (60mm Lift) No Load 1 C59-167

(B)

Linear Rate Raised Height (50mm Lift) 350Kg Constant Load 1 C59-171

(C)

(B)

SHOCK ABSORBER

OR

Heavy Duty Twin Tube Gas 2 GS59-683

SHOCK ABSORBER

STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Heavy Duty Twin Tube Gas 2 GS59-682

UNDER BODY BUSH KIT

UNDER BODY BUSH KIT See Rear Under Body Bush Kit

Kit Includes Front & Rear Under Body Bushes

CASTOR KIT Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

1 PB59-503K

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

2 4 2 4 4 2

x x x x x x

Front Radius Arm to Chassis Bush Front Leading Arm Bush Front Panhard Rod Bush Rear Upper Trailing Arm Bush Rear Lower Trailing Arm Bush Rear Panhard Rod Bush BRAKE ADJUSTER

Recommended when raising vehicle (Suits 2” - 3” Lift)

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

1 PB59-1258K 1 BA45-005

JAN14

131

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TYPE: Landcruiser 100 Series

TOYOTA

MODEL: HDJ100, HZJ100, YEAR: 1998 - 11/2007 UZJ100 DETAIL: Petrol and Diesel Independent Front Suspension This vehicle is fitted standard with a Hydraulic Ride System. To convert this system TOY-75 to a conventional suspension system, a COMPLETE KIT must be fitted.

TORSION BAR

PART NUMBER Price Code (if applicable)

V8 Petrol

Heavy Duty Rate Increased Length 1160mm 1 TB59-1600 Check length before ordering

Diesel / Turbo Diesel / 6 Cyl. Petrol

Heavy Duty Rate Increased Length 1210mm 1 TB59-1610

REAR

QTY

FRONT

QTY

TOYOTA

MAKE:

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Standard Height (10mm Lift) 1 C59-169

(B)

Linear Rate Raised Height (30mm Lift) Up to 100Kg Constant Load Recommended 1 C59-167

(B)

Linear Rate Raised Height (30mm Lift) 200Kg Constant Load 1 C59-185

(C)

Linear Rate Raised Height (30mm Lift) 400Kg Constant Load 1 C59-171

(C)

SHOCK ABSORBER

Check length before ordering

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-682

UNDER BODY BUSH KIT

Kit Includes Rear Bushes Only

Heavy Duty Twin Tube Gas 2 GS59-782

132

JAN14

2 x Panhard Rod Bush 4 x Rear Upper Trailing Arm Bush 4 x Rear Lower Trailng Arm Bush

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

1 PB59-1259K

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Landcruiser 200 Series

TOYOTA

TOYOTA

MODEL: UZJ/URJ/GRJ/VDJ 200

YEAR: 11/2007 on

DETAIL: Station Wagon

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

TOY-96

COIL SPRING

(if applicable)

PART NUMBER Price Code

(if applicable)

GRJ200 4.0L 6 Cyl. Petrol Linear Rate Standard Height 1 C59-536

(C)

Linear Rate Raised Height (50mm Lift) 1 C59-540

(B)

UZJ200 4.7L V8 Petrol URJ200 5.7L V8 Petrol

Linear Rate Standard Height 1 C59-543

(B)

Variable Rate Raised Height (10mm Lift)

This variable rate coil allows less height change and provides a firmer ride when loading 1 C59-559V

(C)

Linear Rate Raised Height (25mm Lift) 1 C59-538

(B)

Linear Rate Raised Height (35mm Lift) 1 C59-540

Linear Rate Raised Height (30mm Lift) 1 C59-535

(C)

(B)

Linear Rate Raised Height (50mm Lift) 1 C59-542

Linear Rate Raised Height (30mm Lift) 100-200Kg Constant Load 1 C59-545

(B)

(B)

Linear Rate Raised Height (50mm Lift) 80-120Kg Accessories (Bullbar OR Winch) 1 C59-544

Linear Rate Raised Height (50mm Lift) No Load 1 C59-545

(B)

(B)

Linear Rate Raised Height (30mm Lift) 400Kg Constant Load 1 C59-547

(B)

Linear Rate Raised Height (50mm Lift) 300Kg Constant Load 1 C59-547

(B)

Linear Rate Raised Height (50mm Lift) 500Kg Constant Load 1 C59-549

(B)

VDJ200 4.5L Twin Turbo V8 Diesel Linear Rate Raised Height (30mm Lift) 1 C59-540 Linear Rate Raised Height (50mm Lift) 1 C59-544 Linear Rate Raised Height (50mm Lift) 80-120Kg Accessories (Bullbar OR Winch) 1 C59-568

(B)

(B)

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-688

OR Extra Heavy Duty Twin Tube Gas 2 GS59-690

OR Extra Heavy Duty Twin Tube Gas Monster Shock 45mm Piston, 70mm Body 2 GS59-734

Heavy Duty Twin Tube Gas 2 GS59-682

STRUT CAP

2 SC59-006

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Extra Heavy Duty Twin Tube Gas Monster Shock 45mm Piston, 70mm Body 2 GS59-698

Raised Height measurements are listed as a guide only

JAN14 Rev.2

133

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TYPE: Landcruiser 70 Series

TOYOTA

MODEL: FJ/BJ 70, BJ71, FJ/BJ 73, FJ/BJ 74 DETAIL: Mid Wheel Base

YEAR: 1985 - 12/1989

LEAF SPRING

PART NUMBER Price Code (if applicable)

Single Stage

REAR

QTY

FRONT

QTY

TOY-57

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Single Stage

7 Leaves Raised Height (45mm Lift) 2 HJ75-7L-F 8 Leaves Raised Height (45mm Lift) 60-100Kg Accessories (Bull Bar and Winch) 2 HJ75-8L-F SHACKLE BUSH KIT

7 Leaves Plus 1 Spacer Leaf Raised Height (50mm Lift) 7 Leaves Plus 1 Spacer Leaf Raised Height (50mm Lift) 150Kg Constant Load

1 HJ60-7L-R RH 1 HJ60-7L-R LH

1 HJ61-7L-R RH 1 HJ61-7L-R LH

8 Leaves Raised Height (50mm Lift) Heavy Duty 1 HJ61-8L-R RH 300Kg Constant Load 1 HJ61-8L-R LH SHACKLE BUSH KIT

Kit Contains: 12 x SPF2260 1 PB59-1019K

Kit Contains: 12 x SPF2260 1 PB59-1019K

U-BOLT KIT U-BOLT KIT

Kit Contains: 2 x UB59-436 1 UB59-436K SHOCK ABSORBER

Kit Contains: 2 x UB59-453-3 2 UB59-453-3K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-637 STEERING DAMPER

Comfort Option Twin Tube Gas 2 GS59-649 Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-651

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824 SHACKLE KIT

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-019

Greasable: Fit in Pairs 2 SK59-003 Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

PIN KIT

Greasable: Fit in Pairs 2 SP59-007 134

JAN14 Rev.1

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-023

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TOYOTA

TYPE: Landcruiser 70 Series

TOYOTA

MODEL: HZJ70, HZJ73, PZJ70, PZJ73 DETAIL: Mid Wheel Base

YEAR: 1990 - 1999

LEAF SPRING

PART NUMBER Price Code (if applicable)

Single Stage

REAR

QTY

FRONT

QTY

TOY-66

PART NUMBER Price Code

LEAF SPRING

(if applicable)

Single Stage

7 Leaves Raised Height (45mm Lift) 2 HJ75-7L-F 8 Leaves Raised Height (45mm Lift) 60-100Kg Accessories (Bull Bar and Winch) 2 HZJ75-8L-F SHACKLE BUSH KIT

7 Leaves Plus 1 Spacer Leaf Raised Height (50mm Lift) 7 Leaves Plus 1 Spacer Leaf Raised Height (50mm Lift) 150Kg Constant Load

1 HJ60-7L-R RH 1 HJ60-7L-R LH

1 HJ61-7L-R RH 1 HJ61-7L-R LH

8 Leaves Raised Height (50mm Lift) Heavy Duty 1 HJ61-8L-R RH 300Kg Constant Load 1 HJ61-8L-R LH SHACKLE BUSH KIT

Kit Contains: 12 x SPF2260 1 PB59-1019K

Kit Contains: 12 x SPF2260 1 PB59-1019K

U-BOLT KIT U-BOLT KIT

Kit Contains: 2 x UB59-436 1 UB59-436K SHOCK ABSORBER

Kit Contains: 2 x UB59-453-3 2 UB59-453-3K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-637 STEERING DAMPER

Comfort Option Twin Tube Gas 2 GS59-649 Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-651

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824 SHACKLE KIT

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-019

Greasable: Fit in Pairs 2 SK59-003 Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047 PIN KIT

PIN KIT

Greasable: Fit in Pairs 2 SP59-007 Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-023

Raised Height measurements are listed as a guide only

JAN14 Rev.1

135

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TOYOTA

TYPE: Landcruiser

MODEL: SWB - FZJ71, HZJ71 MWB - FZJ74, HZJ74 DETAIL: LWB - FZJ76, HZJ76

YEAR: 1999 - 2004

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

TOY-87

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Single Stage

FZJ/HZJ 71 SWB Linear Rate Standard Height 1 C59-250 Linear Rate Raised Height (50mm Lift) Comfort Option Up to 50 Kg Accessories (Bullbar OR Winch) 1 C59-246

7 Leaves Plus 1 Spacer Leaf 1 L59-071-R RH Raised Height (50mm Lift) 1 L59-071-R LH

(B)

FZJ/HZJ 74 MWB

(B)

Linear Rate Raised Height (50mm Lift) Up to 50 Kg Accessories (Bullbar OR Winch) 1 C59-248

(B)

Linear Rate Raised Height (50mm Lift) Super Heavy Duty 50-100Kg Accessories (Bullbar and Winch) 1 C59-252

(B)

7 Leaves Plus 1 Spacer Leaf 1 L59-074-R RH Raised Height (50mm Lift) 1 L59-074-R LH

FZJ/HZJ 76 LWB

7 Leaves Raised Height (50mm Lift) 250Kg Constant Load 2 L59-021-R

SHACKLE BUSH KIT

Kit Contains: 4 x SPF1781 2 x SPF1782 4 x SPF1798 1 PB59-1090K

SHOCK ABSORBER

U-BOLT KIT

Heavy Duty Twin Tube Gas 2 GS45-114 STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Kit Contains: 71 SWB + 74 MWB

2 x UB59-453-3 2 UB59-453-3K

76 LWB

2 x UB59-453-3 2 UB59-453-1K

SHOCK ABSORBER

UNDER BODY BUSH KIT

Comfort Option Twin Tube Gas Light Load 2 GS59-649

Kit Includes Front Under Body Bushes

2 x Front Panhard Rod Bush 2 x Front Leading Arm to Diff Bush 4 x Front Leading Arm to Chassis Bush

1 PB59-1261K

CASTOR KIT

SHACKLE KIT

Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

1 PB59-503K

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

136

JAN14 Rev.1

Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-651

Greasable: Fit in Pairs 2 SK59-051 PIN KIT

Greasable: Fit in Pairs 2 SP59-044

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TOYOTA

TYPE: Landcruiser 70 Series

TOYOTA

MODEL: GRJ71, HZJ71

YEAR: 08/2009 on

DETAIL: SWB

PART NUMBER

REAR

Price Code

COIL SPRING

QTY

FRONT

QTY

TOY-108

Price Code

LEAF SPRING

(if applicable)

PART NUMBER (if applicable)

Two Stage

Variable Rate Standard Height 1 C59-454 Linear Rate, Comfort Option Raised Height (40mm Lift) With No Accessories 1 C59-246 Linear Rate Raised Height (40mm Lift) 50Kg Accessories (Bullbar) 1 C59-250 Linear Rate Raised Height (50mm Lift) Up to 100Kg Accessories (Bullbar and Winch) 1 C59-248

7 Leaves + 1 Spacer 1 L59-071-R RH Raised Height (50mm Lift) 1 L59-071-R LH (B)

7 Leaves + 1 Spacer Raised Height (50mm Lift) 1 L59-074-R RH 250-350Kg Constant Load 1 L59-074-R LH (B)

SHACKLE BUSH KIT (B)

Kit Contains: 8 x SPF1798 4 x SPF1781 1 PB59-1100K

(B)

U-BOLT KIT

SHOCK ABSORBER

Kit Contains: 2 x UB59-453-3 2 UB59-453-3K

Heavy Duty Twin Tube Gas 2 GS45-114

SHOCK ABSORBER

STEERING DAMPER

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-825 UNDER BODY BUSH KIT

Soft Option Twin Tube Gas (Big Bore) Not For Loaded Vehicles 2 GS45-115 Heavy Duty Twin Tube Gas (Big Bore) 2 GS59-079

Kit Includes Front Under Body Bushes

2 x Front Panhard Rod Bush 2 x Front Leading Arm to Diff Bush 4 x Front Leading Arm to Chassis Bush

Heavy Duty Twin Tube Gas (Big Bore) Long Travel 2 GS59-703

1 PB59-1261K SHACKLE KIT

CASTOR KIT Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

1

PB59-503K

1

RB59-522K

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

Greasable: Fit in Pairs 2 SK59-051 PIN KIT

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Greasable: Fit in Pairs 2 SP59-057

Raised Height measurements are listed as a guide only

JAN14

137

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TOYOTA

TYPE: Landcruiser

MODEL: FZJ77, HZJ77, PZJ77

YEAR: 1993 - 1999

DETAIL: Station Wagon. 5 Door.

LEAF SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

TOY-98

Price Code

LEAF SPRING

(if applicable)

Single Stage

PART NUMBER (if applicable)

Two Stage

4+2 Leaves Raised Height (50mm Lift) Standard Duty No Load 2 L59-020-R

7 Leaves Raised Height (45mm Lift) 2 HZJ75-7L-F

5+2 Leaves Raised Height (50mm Lift) Heavy Duty 300Kg Constant Load 2 L59-021-R

8 Leaves Raised Height (50mm Lift) 2 HZJ75-8L-F

6+2 Leaves Raised Height (50mm Lift) Super Heavy Duty 450Kg Constant Load 2 L59-022-R

8 Leaves Raised Height (45mm Lift) Up to 80Kg Accessories (Bull Bar OR Winch) 2 HJ75-8L-F

SHACKLE BUSH KIT

SHACKLE BUSH KIT

Kit Contains: 12 x SPF2260 1 PB59-1019K

Kit Contains: 12 x SPF2270 1 PB59-1020K U-BOLT KIT

U-BOLT KIT

Kit Contains: 2 x UB59-668 1 UB59-668K SHOCK ABSORBER

Kit Contains: Suits: Suits: Suits:

2 x UB59-453-3 2 UB59-453-3K 2 x UB59-453-3 2 UB59-453-3K 2 x UB59-453-1 2 UB59-453-1K

L59-020-R L59-021-R L59-022-R

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-637 STEERING DAMPER

Soft Option Twin Tube Gas Big Bore (Not for Loaded Vehicles) 2 GS45-115 Heavy Duty Twin Tube Gas Big Bore 2 GS59-079

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Heavy Duty Twin Tube Gas Big Bore Long Travel 2 GS59-703 SHACKLE KIT

SHACKLE KIT

Greasable: Fit in Pairs 2 SK59-019

Greasable: Fit in Pairs 2 SK59-018 Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047

PIN KIT

PIN KIT

Greasable: Fit in Pairs 2 SP59-007

138

JAN14

Can be substituted by: Right Hand Side (Anti-Reverse) 1 SK59-048 Left Hand Side (Anti-reverse) 1 SK59-047

Greasable: Fit in Pairs 2 SP59-023

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

MODEL: LJ70, LJ73, RJ70, RJ73

TOYOTA

TYPE: Landcruiser 70 Series Bundera YEAR: 11/1984 - 12/1989

TOYOTA

DETAIL: Round Headlights

COIL SPRING

PART NUMBER

REAR

Price Code (if applicable)

Linear Rate Standard Height 1 C59-084 Linear Rate Raised Height (45mm Lift) 60-100Kg Accessories (Bull Bar and Winch) 1 C59-082 Linear Rate Raised Height (60mm Lift) 60-100Kg Accessories (Bull Bar and Winch) 1 C59-404

QTY

FRONT

QTY

TOY-64

Price Code

(if applicable)

COIL SPRING

Linear Rate Standard Height 1 C59-085

(B)

Linear Rate Raised Height (50mm Lift) Up to 100Kg Constant Load 1 C59-083

(B)

Linear Rate Raised Height (65mm Lift) Up to 100Kg Constant Load 1 C59-405

(B)

(B)

(B)

PART NUMBER

(B)

SHOCK ABSORBER KIT SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS45-114

This vehicle has 2 different shock absorbers on the rear Type A

Type B

STEERING DAMPER

When ordering only one side, please make sure that the correct part number is ordered

Kit Contains: 2 Different Part Numbers

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Heavy Duty Twin Tube Gas Big Bore

UNDER BODY BUSH KIT

Right Hand Side Left Hand Side

1 x GS59-651 (Type A) 1 x GS45-640 (Type B) 1 GS59-652K

UNDER BODY BUSH KIT

See Rear Under Body Bush Kit

CASTOR KIT

Front Radius Arm Castor Kit (±2.5°)

Kit Includes Front & Rear Under Body Bushes

4 x Polyurethane Bushes Complete with steel inner sleeve

(+1 Grease Tube)

1 WA59-512K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

2 4 2 2 4 2

x x x x x x

Front Radius Arm to Chassis Bush Front Radius Arm to Diff Bush Front Panhard Rod Bush Rear Radius Arm to Chassis Bush Rear Radius Arm to Diff Bush Rear Panhard Rod Bush

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

1 PB59-1255K

JAN14

139

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TOYOTA

TYPE: Landcruiser 70 Series

MODEL: LJ70, LJ72, LJ73, LJ77, YEAR: 01/1990 - 05/1993 (RJ70, RJ73, KZJ 70/73 - 1994 on) DETAIL: Square Headlights

COIL SPRING

PART NUMBER

REAR

Price Code

(B)

(B)

Fit Long travel shock absorber GS59-634 with the above spring.

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (40mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C59-288 Linear Rate Super Raised Height (60mm Lift) Up to 50Kg Accessories (Bull Bar and Winch) (Recommended) 1 C59-244

QTY

FRONT

QTY

TOY-65

(if applicable)

Linear Rate Raised Height (40mm Lift) (Recommended) 1 C59-289

(B)

Linear Rate Super Raised Height (65mm Lift) Up to 100Kg Constant Load 1 C59-247

(B)

Fit Long travel shock absorber GS59-633 with the above spring.

SHOCK ABSORBER SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-632 To be used with original Toyota springs OR C59-288

Heavy Duty Twin Tube Gas Long Travel 2 GS59-634 Heavy Duty Twin Tube Gas 2 GS59-631

Can only be used with C59-244

To be used with original Toyota springs OR C59-289

STEERING DAMPER

Heavy Duty Twin Tube Gas Long Travel 2 GS59-633

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Can only be used with C59-247

UNDER BODY BUSH KIT UNDER BODY BUSH KIT See Rear Under Body Bush Kit

CASTOR KIT Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

1 PB59-503K Kit Includes Front & Rear Under Body Bushes

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

ADJUSTABLE PANHARD RODS

Left Hand Drive

140

JAN14

2 4 2 2 4 2

x x x x x x

Front Radius Rod to Chassis Bush Front Radius Rod to Diff Bush Front Panhard Rod Bush Rear Radius Rod to Chassis Bush Rear Radius Rod to Diff Bush Rear Panhard Rod Bush

1 PB59-1260K

Complete with Bushes 1 PR59-1408

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

MODEL: LJ78/79, RJ77, KZJ78

TOYOTA

TYPE: 70 Series Prado I Landcruiser II YEAR: 1987 - 1996

TOYOTA

DETAIL: Station Wagon SX5 2.4L Petrol, 2.4L TD

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

Linear Rate Standard Height 1 C59-290 Linear Rate Raised Height (45mm Lift) Up to 50Kg Accessories (Bull Bar OR Winch) 1 C59-288

QTY

FRONT

QTY

TOY-79

PART NUMBER Price Code

(if applicable)

(B)

(B)

Linear Rate Raised Height (45mm Lift) 50-110Kg Accessories (Bull Bar and Winch) 1 C59-206

(B)

Linear Rate Super Raised Height (60mm Lift) Up to 50Kg Accessories (Bull Bar and Winch) (Recommended) 1 C59-244

(B)

Linear Rate Standard Height 1 C59-291

(B)

Linear Rate Raised Height (45mm Lift) 1 C59-289

(B)

Linear Rate Super Raised Height (65mm Lift) Up to 100Kg Constant Load 1 C59-247

(B)

Fit Long travel shock absorber GS59-633 with the above spring.

Fit Long travel shock absorber GS59-634 with the above spring.

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-632 To be used with original Toyota springs OR C59-290, C59-288, C59-206

Heavy Duty Twin Tube Gas Long Travel 2 GS59-634

Heavy Duty Twin Tube Gas 2 GS59-631

Can only be used with C59-244

To be used with original Toyota springs OR C59-291, C59-289

STEERING DAMPER

Heavy Duty Twin Tube Gas Long Travel 2 GS59-633

Heavy Duty (Big Bore) Complete with Fittings 1 SD59-824

Can only be used with C59-247

UNDER BODY BUSH KIT UNDER BODY BUSH KIT See Rear Under Body Bush Kit

CASTOR KIT Adjustable Front Radius Arm Castor Kit Angle Settings: ±0° or ±2.5° 4 x Polyurethane Eccentric Bushes

1 PB59-503K Kit Includes Front & Rear Under Body Bushes

Fixed Rubber Front Radius Arm Castor Kit Angle Setting: ±2.5° 4 x Rubber Eccentric Bushes

1 RB59-522K

Raising vehicle will effect castor angle. A wheel allignment is recommended to determine if a castor kit is required.

ADJUSTABLE PANHARD RODS

Left Hand Drive

2 4 2 2 4 2

x x x x x x

Front Radius Rod to Chassis Bush Front Radius Rod to Diff Bush Front Panhard Rod Bush Rear Radius Rod to Chassis Bush Rear Radius Rod to Diff Bush Rear Panhard Rod Bush

1 PB59-1260K

Complete with Bushes 1 PR59-1408

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14

141

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

TOYOTA

4X4 MAKE:

TOYOTA

MODEL:

RZN/VZN/KZN/KDJ 90 SWB

TYPE: Landcruiser 90 Series Prado YEAR: 1996 - 2003

RZN/VZN/KZN/KDJ 95 LWB

DETAIL: Station Wagon

COIL SPRING

SWB

RZJ90 VZJ90 KZJ90

PART NUMBER Price Code

3.4L V6 3.0L T/Diesel

(B)

(B)

(B)

2.7L Petrol 3.4L V6

Linear Rate Standard Height 1 C59-274 Linear Rate Raised Height (35mm Lift) Up to 60Kg Accessories (Bull Bar OR Winch) 1 C59-276 Linear Rate Raised Height (35mm Lift) Up to 90Kg Accessories (Bull Bar OR Winch) 1 C59-134 KZJ95 KDJ95

(B)

3.0L T/Diesel

Linear Rate Raised Height (40mm Lift) 60-90Kg Accessories (Bull Bar and Winch) 1 C59-296 RZJ95 VZJ95

(if applicable)

2.7L Petrol

Linear Rate Raised Height (40mm Lift) 1 C59-134

LWB

PART NUMBER Price Code

COIL SPRING

(if applicable)

Linear Rate Raised Height (35mm Lift) Up to 60Kg Accessories (Bull Bar OR Winch) 1 C59-276 Linear Rate Raised Height (35mm Lift) 60-90Kg Accessories (Bull Bar and Winch) 1 C59-134 KDJ90

REAR

QTY

FRONT

QTY

TOY-72

(B)

Linear Rate Standard Height 1 C59-133

(B)

Linear Rate Raised Height (35mm Lift) Up to 100Kg Constant Load (Recommended) 1 C59-131

(B)

Variable Rate Raised Height (40mm Lift) Heavy Duty 100Kg Constant Load 1 C59-137V

(B)

Variable Rate Raised Height (40mm Lift) Extra Heavy Duty 150Kg Constant Load 1 C59-297V

(B)

Linear Rate Raised Height Super Heavy Duty 300Kg Constant Load 1 C59-303

(B)

(B)

SHOCK ABSORBER (B)

3.0L T/Diesel 3.0L T/Diesel

Linear Rate Raised Height (35mm Lift) No Accessories 1 C59-134 Linear Rate Raised Height (35mm Lift) 60-90Kg Accessories (Bull Bar OR Winch) 1 C59-296 SHOCK ABSORBER

(B)

(B)

Heavy Duty Twin Tube Gas Big Bore 2 GS59-225

UNDER BODY BUSH KIT

Heavy Duty Twin Tube Gas 2 GS59-222

Kit Includes Rear Under Body Bushes Only

STRUT CAP

2 SC59-002

142

JAN14

2 x Rear Panhard Rod Bush 4 x Rear Lower Trailing Arm Bush 4 x Rear Upper Trailing Arm Bush

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

1 PB59-1256K

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TOYOTA

MODEL:

RZJ/VZJ/KZJ/KDJ 125

TYPE: Landcruiser 120 Series Prado YEAR: 2003 - 11/2009

TOYOTA

MAKE:

RZJ/VZJ/GRJ/KZJ/KDJ 120, VZJ/KDJ 121

DETAIL: Station Wagon SWB & LWB

PART NUMBER

REAR

Price Code

COIL SPRING

QTY

FRONT

QTY

TOY-82

COIL SPRING

(if applicable)

SWB

SWB (B)

KDJ125 3.0L T/Diesel

LWB

Linear Rate Raised Height (35mm Lift) Up to 60Kg Accessories (Bull Bar OR Winch) 1 C59-300

(B)

Linear Rate Raised Height (35mm Lift) 60-100Kg Accessories (Bull Bar and Winch) 1 C59-302

(B)

Linear Rate Raised Height (45mm Lift) 1 C59-296

(B)

3.4L V6

Linear Rate Raised Height (45mm Lift) 1 C59-300

GRJ120 KDJ120/121

Linear Rate Raised Height (20mm Lift) 1 C59-323

(B)

Linear Rate Raised Height (50mm Lift) 60-100Kg Constant Load 1 C59-325

(B)

Linear Rate Raised Height (50mm Lift) 100-300Kg Constant Load 1 C59-327

(B)

Linear Rate Standard Height 1 C59-323

(B)

Linear Rate Raised Height (45mm Lift) 1 C59-325

(B)

Linear Rate Raised Height (50mm Lift) 100-300Kg Constant Load 1 C59-327

(B)

Linear Rate Raised Height (45mm Lift) 300-400Kg Constant Load 1 C59-329

(B)

Linear Rate Raised Height (45mm Lift) 400-500Kg Constant Load 1 C59-331

(B)

LWB

RZJ120 2.7L Petrol

VZJ120/121

Price Code

(if applicable)

RZJ125 2.7L Petrol VZJ125 3.4L V6 KZJ125 3.0L T/Diesel

Linear Rate Raised Height (45mm Lift) Up to 60Kg Accessories (Bull Bar OR Winch) 1 C59-296

PART NUMBER

(B)

4.0L V6 3.0L T/Diesel

Linear Rate Lowered Height 1 C59-274

(B)

Linear Rate Standard Height 1 C59-134

(B)

Linear Rate Raised Height (35mm Lift) 1 C59-300

(B)

Linear Rate Raised Height (35mm Lift) 60-100Kg Accessories (Bull Bar and Winch) 1 C59-302

SHOCK ABSORBER (B)

KZJ120 3.0L T/Diesel

Linear Rate Raised Height (40mm Lift) 1 C59-302

Linear Rate Raised Height (45mm Lift) 80-150Kg Accessories (Bull Bar and Winch) 1 C59-314

(B)

Heavy Duty (Long Travel) Twin Tube Gas 2 GS59-701

(B)

Extra Heavy Duty Twin Tube Gas 2 GS59-637

UNDER BODY BUSH KIT

UNDER BODY BUSH KIT See Rear Under Body Bushes Kit

SHOCK ABSORBER

Kit Includes Front and Rear Under Body Bushes

Heavy Duty Twin Tube Gas 2 GS59-221 STRUT CAP

2 SC59-001

2 2 4 2 4 4

x x x x x x

Front Control Arm Lower Inner Front Front Control Arm Lower Inner Rear Front Control Upper Inner Rear Panhard Rod Bush Rear Trailing Arm Lower Rear Trailing Arm Upper

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

1 PB59-1263K

JAN14 Rev.1

143

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 TOYOTA

TOYOTA

MAKE:

TYPE: Landcruiser 150 Series Prado YEAR: 2010 on

MODEL: KDJ150, GRJ150, KDJ155 DETAIL: Station Wagon. SWB & LWB.

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

SWB & LWB Petrol

Without KDSS Linear Rate Raised Height (40mm Lift) 1 C59-300

Linear Rate Raised Height (40mm Lift) 70-100Kg Accessories (Bull Bar and Winch) 1 C59-302

SWB

SWB & LWB

Price Code (if applicable)

Without KDSS Linear Rate Raised Height (20mm Lift) 1 C59-323

(B)

(B)

Linear Rate Raised Height (50mm Lift) 60-100Kg Constant Load 1 C59-325

(B)

Linear Rate Raised Height (50mm Lift) 100-300Kg Constant Load 1 C59-327

(B)

Without KDSS Linear Rate Raised Height (30mm Lift) 1 C59-300

(B)

Linear Rate Raised Height (40mm Lift) 1 C59-350

(B)

LWB

(B)

With KDSS Linear Rate Raised Height (30mm Lift) 1 C59-722

(B)

Linear Rate Raised Height (40mm Lift) 1 C59-724

(B)

Linear Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bull Bar and Winch) 1 C59-726

(B)

SHOCK ABSORBER

PART NUMBER

(B)

SWB & LWB Diesel

Linear Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bull Bar and Winch) 1 C59-352

QTY

FRONT

QTY

TOY-100

LWB

Without KDSS Linear Rate Raised Height (45mm Lift) 1 C59-325

(B)

Linear Rate Raised Height (45mm Lift) 100-300Kg Constant Load 1 C59-327

(B)

Linear Rate Raised Height (45mm Lift) 300-400Kg Constant Load 1 C59-329

(B)

With KDSS Linear Rate Raised Height (35mm Lift) 1 C59-723

(B)

Linear Rate Raised Height (45mm Lift) 1 C59-725

(B)

Linear Rate Raised Height (45mm Lift) 100-300Kg Constant Load 1 C59-727

(B)

Linear Rate Raised Height (45mm Lift) 300-400Kg Constant Load 1 C59-729

(B)

Heavy Duty Twin Tube Gas 2 GS59-700 SHOCK ABSORBER

KDSS = Kinetic Dynamic Suspension System

STRUT CAP

Heavy Duty (Long Travel) Twin Tube Gas 2 GS59-701 2 SC59-001

144

JAN14

Extra Heavy Duty Twin Tube Gas 2 GS59-637

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TOYOTA

TYPE: Fortuner

TOYOTA

MODEL: KUN / TGN 51

YEAR: 2005 on

DETAIL: 2.7L Petrol TGN51, 3.0L Diesel KUN51 4.0L Petrol (South America)

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

TOY-85

PART NUMBER Price Code

(if applicable)

Vehicles fitted with this part number MUST be fitted with GS59-220 shock absorber.

Linear Rate Standard Height Comfort Option 1 C59-338 Linear Rate Raised Height (20mm Lift) Comfort Option 1 C59-316

(B)

Linear Rate Standard Height Comfort Option 1 C59-377

(B)

Linear Rate Raised Height (20mm Lift) Comfort Option 1 C59-875

(B)

(B)

2.7L Petrol

Linear Rate Standard Height 1 C59-136

(B)

Linear Rate Raised Height (25mm Lift) 1 C59-274

(B)

Linear Rate Raised Height (50mm Lift) 50-100Kg Accessories (Bullbar and Winch) 1 C59-276

Linear Rate Standard Height 1 C59-353

(B)

(B)

Linear Rate Raised Height (35mm Lift) 1 C59-355

(B)

3.0L Diesel, 4.0L Petrol

Linear Rate Standard Height 1 C59-274

(B)

Linear Rate Raised Height (40mm Lift) 1 C59-276

(B)

Linear Rate Raised Height (40mm Lift) 50-100Kg Accessories (Bullbar and Winch) 1 C59-134

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-220 STRUT CAP

2 SC59-001

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Twin Tube Gas 2 GS59-637

Raised Height measurements are listed as a guide only

JAN14

145

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

TOYOTA

MAKE:

TOYOTA

TYPE: FJ Cruiser

MODEL: GSJ15

YEAR: 11/2006 to 11/2010 (USA) 1-2011 on (AUST)

DETAIL: 4.0L V6

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

QTY

FRONT

QTY

TOY-94

PART NUMBER Price Code (if applicable)

Linear Rate Raised Height (35mm Lift) 1 C59-238

(B)

Linear Rate Raised Height (30mm Lift) 1 C59-599

(B)

Linear Rate Raised Height (60mm Lift) 1 C59-300

(B)

Linear Rate Raised Height (60mm Lift) 1 C59-325

(B)

Linear Rate Raised Height (80mm Lift) 1 C59-327

(B)

Linear Rate Raised Height (80mm Lift) 100-300Kg Constant Load 1 C59-329

(B)

Linear Rate Raised Height (60mm Lift) Up to 100Kg Accessories (Bullbar and Winch) 1 C59-302

(B)

SHOCK ABSORBER

SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-700

STRUT CAP

Heavy Duty (Long Travel) Twin Tube Gas 2 GS59-701 2 SC59-001

146

JAN14

Extra Heavy Duty Twin Tube Gas 2 GS59-637

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts Raised are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 MAKE:

TYPE: Rav 4

TOYOTA

TOYOTA

MODEL: SXA10, SXA11 (Year: 1993 - 05/2000) ACA20, 21, 22, 23 (Year: 05/2000 - 2006) DETAIL: ACA33 (Year: 2006 on) 3 Doors and 5 Doors

COIL SPRING

PART NUMBER

REAR

Price Code

COIL SPRING

(if applicable)

1993 - 05/2000 SXA10 - 3 Door SXA11 - 5 Door

QTY

FRONT

QTY

TOY-71

PART NUMBER Price Code

(if applicable)

1993 - 05/2000 SXA10 - 3 Door

Linear Rate Raised Height (35mm Lift) 1 C59-088

Linear Rate Raised Height (35mm Lift) 1 C19-016 (B)

1993 - 05/2000 SXA10 - 5 Door Linear Rate Raised Height (35mm Lift) 1 C19-022

05/2000 - 2006 ACA20 2.0L 3 Door ACA21 2.0L 5 Door ACA22R 2.4L 3 Door ACA23R 2.4L 5 Door Linear Rate Raised Height (45mm Lift) 1 C59-088

(B)

(A)

05/2000 - 2006 ACA20 2.0L 3 Door ACA21 2.0L 5 Door ACA22R 2.4L 3 Door ACA23R 2.4L 5 Door

05/2000 on 2.0L Diesel Linear Rate Raised Height 1 C59-364

(A)

Linear Rate Raised Height (45mm Lift) 1 C59-091

(B)

Linear Rate Raised Height (25mm Lift) 1 C59-425

(B)

(B)

2006 on ACA33

2006 on ACA33 Linear Rate Raised Height (25mm Lift) 1 C59-424

(B)

SHOCK ABSORBER

1993 - 2006 (NOT for 2006 on) Heavy Duty Twin Tube Gas 2 GS59-940

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Rai d Height Heigh Hei He i ht measurements ight m meas easure uremen emen mentts ts Raised are listed as a guide only

JAN14 Rev.1

147

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4

UAZ

MAKE:

UAZ

TYPE: Patriot

MODEL:

UAZ

YEAR: 2005 on

DETAIL: Station Wagon

PART NUMBER

REAR

QTY

FRONT

QTY

UAZ-52

Price Code

PART NUMBER Price Code

(if applicable)

(if applicable)

COIL SPRING

There are two different spring types on offer for this vehicle

LEAF SPRING Single Stage

Linear Rate Raised Height (40mm Lift) Up to 40Kg Accessories (Bullbar OR Winch) 1 C45-083

Linear Rate Raised Height (50mm Lift) 40-100Kg Accessories (Bullbar and Winch) 1 C29-030

5 Leaves Raised Height (50mm Lift) Up to 60Kg Constant Load 2 UAZ-004-R LEAF SPRING (B)

Two Stage

4+2 Leaves Raised Height (50mm Lift) 2 UAZ-006-R (B)

SHACKLE BUSH KIT

Kit Contains: 12 x PB62-1512 1 PB62-1097K

STEERING DAMPER

U-BOLT KIT Heavy Duty (Big Bore) Complete with Fittings 1 SD51-832

SHOCK ABSORBER

Kit Contains: 2 x UB59-453-2 2 UB59-453-2K SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS59-636 SHACKLE KIT

Heavy Duty Twin Tube Gas 2 GS21-637S Greasable: Fit in Pairs 2 SK62-056

148

JAN14

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

4X4 VOLKSWAGEN

TYPE: Amarok

MODEL:

Volkswagen

YEAR: 2010 on

DETAIL: 4x4 Independant Front Suspension

COIL SPRING

PART NUMBER

REAR

Price Code

QTY

FRONT

QTY

VOLK-51

PART NUMBER Price Code

LEAF SPRING

(if applicable)

VOLKSWAGEN

MAKE:

(if applicable)

Two Stage

3+2 Leaves Raised Height (25mm Lift) Comfort Option No Load 2 L63-033-R

TDI400 CAB CHASSIS & UTILITY Linear Rate Raised Height (35mm Lift) Up to 70Kg Accessories (Bull Bar OR Winch) 1 C63-034

(B)

Linear Rate Raised Height (35mm Lift) 70-120Kg Accessories (Bull Bar and Winch) 1 C63-036

3+3 Leaves Raised Height (35mm Lift) Medium Duty Up to 180Kg Constant Load 2 L63-035-R

(B)

4+3 Leaves Raised Height (35mm Lift) 300Kg Constant Load 2 L63-037-R

TDI400 & 420 DUAL CAB TDI400 & 420 DUAL CAB CHASSIS TDI400 & 420 ALL TRENDLINE MODELS

SHACKLE BUSH KIT

Linear Rate Raised Height (35mm Lift) Up to 70Kg Accessories (Bull Bar OR Winch) 1 C63-036

(B)

Linear Rate Raised Height (35mm Lift) 70-120Kg Accessories (Bull Bar and Winch) 1 C63-032

(B)

Additional bushes included. Some vehicles will use PB63-1522 and other will use PB63-1526.

2 2 2 4

Kit Contains: x PB63-1520 x PB63-1521 x PB63-1522 x PB63-1526 1 PB63-1103K

U-BOLT KIT

TDI400 & 420 ALL HIGHLINE & ULTIMATE MODELS Linear Rate Raised Height (35mm Lift) Up to 70Kg Accessories (Bull Bar OR Winch) 1 C63-032 Linear Rate Raised Height (35mm Lift) 70-120Kg Accessories (Bull Bar and Winch) 1 C63-038

Kit Contains:

(B)

(B)

L63-033-R

2 x UB59-453-3 2 UB59-453-3K

L63-035-R L63-037-R

2 x UB59-453-1 2 UB59-453-1K 2 x UB59-453-1 2 UB59-453-1K

Lifting the vehicle above 35mm may affect the C.V. Joints

SHOCK ABSORBER SHOCK ABSORBER

Heavy Duty Twin Tube Gas 2 GS63-010

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Heavy Duty Twin Tube Gas 2 GS63-011

Raised Height measurements are listed as a guide only

JAN14 Rev.1

149

ENJOY THE RIDE...

...RIDE TO ENJOY

DETAIL: Holden, Jeep, Landrover, Nissan, Suzuki, Toyota

Coil Spacers

IMPORTANT NOTICE: Adding Coil Spring Spacers to the Vehicle may cause “Coil Bind” (all coils closed together) before the bump stop comes into effect. This can cause very serious damage to the spring and/or suspension components.

QTY

FRONT

PART NUMBER

REAR HOLDEN

QTY

COIL SPACERS

SPRING & SUSPENSION

PART NUMBER

Jackaroo UBS25, UBS69 10mm 1 PS21-4008 30mm 1 PS21-4009

JEEP

JEEP

Wrangler TJ (1996 - 2005) Cherokee XJ (1994 - 2001)

Wrangler TJ (1996 - 2005) 10mm 1 PS29-4016 15mm 1 PS29-4017 30mm 1 PS29-4018

15mm 1 PS29-4014 30mm 1 PS29-4015 LANDROVER

90, 110 Defender 90, 110, 130 Discovery Range Rover

(1984 (1992 (1991 (1970

-

5mm 10mm 20mm 30mm NISSAN

LANDROVER

1991) 1999) 1999) 1999)

Discovery (1991 - 1999) Range Rover (1970 - 1999) 1 1 1 1

PS59-4001 PS59-4002 PS59-4003 PS59-4004

5mm 10mm 20mm 30mm NISSAN

GQ - GU

15mm 1 PS45-4012 30mm 1 PS45-4013

SUZUKI

Vitara JLX (1988 - 1997)

Vitara JLX (1988 - 1997)

15mm 1 PS29-4014 30mm 1 PS29-4015 TOYOTA

5mm 10mm 20mm 30mm

15mm 1 PS29-4014 30mm 1 PS29-4015 TOYOTA

80 Series 100 Series (Non IFS) 1 1 1 1

80 Series 100 Serie Lexus LX470 4WD Wagon

PS59-4001 PS59-4002 PS59-4003 PS59-4004

76, 78, 79 Series 10mm 1 PS21-4008 30mm 1 PS21-4009

150

JAN14

PS59-4001 PS59-4002 PS59-4003 PS59-4004

GQ - GU

15mm 1 PS45-4010 30mm 1 PS45-4011

SUZUKI

1 1 1 1

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

10mm 1 PS59-4005 15mm 1 PS59-4006 30mm 1 PS59-4007 Prado 90 Series 20mm 1 PS51-4019 30mm 1 PS51-4020

Raised Height measurements are listed as a guide only

ENJOY THE RIDE...

...RIDE TO ENJOY SPRING & SUSPENSION

TERMS OF SALE

& CondiƟons Terms & Terms Conditions of Sale

Interpretation In these Terms and Conditions of Sale (“Terms”), “Goods” means the goods subject of the Contract; “Dobinsons Spring & SuspensionTM” means the entity selling the Goods; “Client” means the entity purchasing the Goods; “Contract” means each contract between Dobinsons Spring & SuspensionTM and Client for the sale and purchase of Goods. Title Title to the goods will not pass to the Client until the following is completed: 1. Dobinsons Spring & SuspensionTM being paid in full under all Contracts. Until the Goods pass to Client, Client must: 1. Hold the Goods as bail for Dobinsons Spring & SuspensionTM and keep them in good order and condition; and 2. Not remove any markings placed by Dobinsons Spring & SuspensionTM and ensure that the Goods can be readily identified and distinguished from other property in Client’s possession; and 3. Deliver the Goods to Dobinsons Spring & SuspensionTM immediately upon demand and, for this purpose, Dobinsons Spring & SuspensionTM is authorized to enter at any time any premises in which the Goods may be located (the costs incidental to which will be borne by Client). Quotations & Orders Any quotation made by Dobinsons Spring & SuspensionTM will not be construed or operate as an offer or obligation to sell. Dobinsons Spring & SuspensionTM reserve the right to accept or reject in its absolute discretion any order received. Client will not be entitled to cancel or refuse delivery of, or payment for, any order made by him, which has been accepted by Dobinsons Spring & SuspensionTM. Price The price payable to Dobinsons Spring & SuspensionTM by Client for the Goods will be the price agreed, failing which it will be the price prevailing at the date the Goods are dispatched by Dobinsons Spring & SuspensionTM for delivery to Client. Prices are payable in Australian currency and exclusive of delivery costs, taxes, duties and other imposts which, if chargeable, are payable by Client. Prices quoted in any Dobinsons Spring & SuspensionTM price list are suggested prices only and may be changed by Dobinsons Spring & SuspensionTM without notice. Payment All Goods will be paid for in full before receiving or dispatching of Goods from Dobinsons Spring & SuspensionTM unless previously arranged. Damage Buyer acknowledges that the Goods leaving Dobinsons Spring & Suspension’s premises are adequately packed. Claims for damage in transit must be made against the carrier and, while Dobinsons Spring & SuspensionTM will not accept liability for any damage, details of any claim must be promptly advised to Dobinsons Spring & Suspension M. Prior to acknowledging delivery to the carrier, Client must ensure that the complete consignment has been received as specified in the carrier’s note. Any shortage or visible damage to outer packaging must be endorsed on the carrier’s note. Any shortages and/or damages must be reported to Dobinsons Spring & SuspensionTM within 72 hours of receipt. Implied Terms, Limitation of Liability & Client Indemnity Subject to these Terms, Dobinsons Spring & SuspensionTM will not be liable for any loss, damage, expense or injury of any kind or nature suffered or incurred by Client or any other person, arising out of or in connection with, the Contract (including, without limitation, liability due to negligence or wilful default of Dobinsons Spring & SuspensionTM and any delay in delivery) or any error (whether negligent or not) in information supplied to Client in connection with its subject matter or the use, possession or delivery of the Goods or the exercise by Dobinsons Spring & SuspensionTM of its right under Breach by Client will indemnify Dobinsons Spring & SuspensionTM in relation to any such loss, damage, expense or injury. Force Majeure Despite any other term or condition of the Contract, Dobinsons Spring & SuspensionTM will not be liable for any loss, damage, expense or injury of any kind or nature suffered or incurred by Client or any other person, arising out of or in connection with any delay in delivery, or failure to perform any other term or condition of the Contract where that delay or failure is caused by an act of God, fire, labour dispute, civil commotion, intervention of a government, inability to obtain labour, materials or manufacturing facilities, accidents, interruptions of or delay in transportation or any other cause beyond Dobinsons Spring & Suspension’s reasonable control. Breach by Client If Client breaches a Contract or Dobinsons Spring & SuspensionTM is not satisfied of a Client’s ability to pay or otherwise comply with each Contract, Dobinsons Spring & SuspensionTM may by notice to Client, but without compensation, terminate every Contract, suspend or cease deliveries under all Contracts, set-off all deposits against amounts due and make all amounts then outstanding by Client to Dobinsons Spring & SuspensionTM immediately due and payable. Errors and Omissions Dobinsons Spring & SuspensionTM has the right to correct any clerical errors or omissions, whether in computation or otherwise in any quotation, acknowledgment, or document forming part of a Contract. Although care has been taken to ensure the accuracy of the data contained in this publication, Dobinsons Spring & SuspensionTM does not assume any liability for errors or omissions.

Torsion Bars: Sold in Pairs Coil Springs: Sold in Pairs - (A) (B) (C) etc... Indicates Price Code

Raised Height measurements are listed as a guide only

JAN14

151

ENJOY THE RIDE...

...RIDE TO ENJOY

TERMS OF SALE

SPRING & SUSPENSION

Terms & Conditions of Sale Warranties Dobinsons Spring & SuspensionTM at its sole discretion will repair or replace any products supplied by them that are found to be defective in either materials or workmanship providing that Dobinsons Spring & SuspensionTM are actually notified in writing from the Client of the alleged defect within two years (2 years) from date of invoice for Coil Springs, Leaf Springs and Shock Absorbers, and within twelve months (12 months) from date of invoice for all other parts. Any claim not made within this period shall conclusively be deemed waived by the Client. Repair or replacement is pre-conditioned on the examination of the goods which on instructions from Dobinsons Spring & SuspensionTM on, should be returned for further inspection to Dobinsons Spring & SuspensionTM or to an Approved Importer. Coil Springs listed in this catalogue have a 2 year warranty against the following: 1. Faulty Manufacture 2. Breakage 3. Sagging (being loss of free height of more than 10mm). Leaf Springs listed in this catalogue have the 2 year warranty against the following: 1. Faulty Manufacture 2. Breakage 3. Sagging (being the loss of free camber by more than 12mm). Shock Absorbers listed in this catalogue have a 2 year warranty providing the vehicle does not have a modified exhaust system. Fridges listed in the catalogue have a 5 year warranty on the motor and a 1 year warranty on all other parts against: 1. Faulty Manufacture Winches listed in the catalogue have a 2 year warranty agains: 1. Faulty Manufacture All other accessories listed in the catalogue have a 1 year warranty against: 1. Faulty Manufacture Dobinsons Spring & SuspensionTM products are designed for normal use and are in no way, covered under warranty should the vehicle be used in any form of extreme sports, competition racing or produce lift of 50mm or more. It is the responsibility of the fitter, to ensure that the customer or the owner of the vehicle is aware of the warranty conditions under which the products have been sold. It is highly recommended that the words ‘Suspension Components Fitted are for Normal Use Only. Warranty Void if used in extreme conditions” is written on their receipt to avoid any confusion. Dobinsons Spring & SuspensionTM will not pay for costs incurred in forwarding or returning goods. This warranty does not cover and Dobinsons Spring & SuspensionTM makes no warranty with respect to; (1) any merchandise that is abused, misused, misapplied, neglected or altered; or that is improperly or incorrectly installed or maintained or used; or that is subjected to abnormal conditions of use, temperature, moisture, dirt or corrosive matter; (2) Goods bought for industrial, mining or agricultural use; (3) Goods no longer required by Client; (4) Goods incorrectly chosen by Client; (5) Goods modified or altered by client; and (6) any merchandise, materials, parts or other components supplied by someone other than Dobinsons Spring & SuspensionTM. Dobinsons Spring & SuspensionTM shall not be liable for any expenses incurred by Client in order to remedy any defect in its product. Dobinsons Spring & SuspensionTM shall not be liable for any consequential, special, indirect or contingent damage or expense arising Directly or Indirectly from any defect in its products or from use of any products. Client agrees to indemnify and hold Dobinsons Spring & SuspensionTM harmless from and against any loss, injury or damage, to person or property, that extends beyond the warranties set forth above, whether the claims against Dobinsons Spring & SuspensionTM or the damages are incidental or consequential. Installation of aftermarket items to your vehicle may adversely affect, void or violate the Manufacturers terms of warranty on your vehicle. Review the terms of your vehicle warranty prior to purchase and/or installation of any aftermarket part or accessory. Dobinsons Spring & SuspensionTM does not make any representations or warranties of any kind as to suitability or fitness for a particular vehicle or purpose. Dobinsons Spring & SuspensionTM shall not be responsible or liable for direct or indirect damages as a result of the purchase and/or installation of these aftermarket products. Terms and Condition The only terms of the Contract are those agreed to in writing by Dobinsons Spring & SuspensionTM, these Terms (to the extent they are not inconsistent with terms agreed to in writing by Dobinsons Spring & SuspensionTM) and those which are implied or imposed by law (including the Trade Practices Act 1974) to the extent that it is not lawful or possible to exclude them. All other terms, conditions and warranties are expressly excluded. If a conflict arises between the terms of any order made by Client and these Terms, these Terms will prevail. An agreement to deliver the Goods in installments is taken to be separate Contract for each installment. The laws of Queensland govern these Terms and Conditions and any Contract that includes them and Dobinsons Spring & SuspensionTM and Client submit to the jurisdiction of the courts of the State. If a term is held to be unenforceable, the remaining terms will apply. Dobinsons Spring & SuspensionTM will not be liable to the Client in the event that delivery of goods is delayed irrespective of the cause.

152

JAN14