207214356-spec-sheet-industry-170hp-tot-450hp.pdf

®

C7 ACERT ™

168 bkW / 225 bhp 2200 rpm

Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 110.0 mm (4.33 in) Stroke...................................................... 127.0 mm (5.0 in) Displacement.................................................7.2 L (442 in³) Aspiration..........................................Turbocharged ATAAC Compression Ratio....................................................... 17:1 Rotation (from flywheel end).................... Counterclockwise Lube Oil System (refill)........................... 28 L (7.4 U.S. gal) Weight, Net Dry (approximate kg, lb)........ 776 kg (1,711 lb)

Image shown may not reflect actual engine

FEATURES Emissions Meets Tier 3, Stage IIIA emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. Worldwide Supplier Capability Caterpillar - Casts engine blocks and heads - Machines critical components - Assembles complete engine - Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities -Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Testing Prototype testing on every model: - proves computer design - verifies system torsional stability - functionality tests every model Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.

Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested. Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,500 dealer outlets Caterpillar factory-trained dealer technicians service every aspect of your industrial engine 99.7% of parts orders filled within 24 hours worldwide Caterpillar parts and labor warranty Preventive maintenance agreements available for repair before failure options Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition - presence of unwanted fluids - presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.

29 June 2006

9:17 AM

®

C7 ACERT ™

INDUSTRIAL ENGINE 168 bkW (225 bhp)

STANDARD ENGINE EQUIPMENT Air Inlet System Air to air aftercooled (ATAAC) Turbocharged Control System Electronic governing, PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Electronic Control Unit (ECU) Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet

Fuel System HEUI™ injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes

Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing

2

29 June 2006

9:17 AM

®

C7 ACERT ™

INDUSTRIAL ENGINE 168 bkW (225 bhp)

PERFORMANCE CURVES IND - B - DM8170-00

Torque N•m

Metric

Engine Power kW

BSFC g/kW-hr

Engine Speed - rpm

Engine Speed Engine Power rpm kW 2200 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1000

168 168 168 168 168 166 163 157 151 138 114 74

Torque N•m 729 764 802 844 891 934 970 1001 1028 1013 910 707

BSFC g/kW-hr Fuel Rate L/hr 234.8 233.5 230.3 226.1 222.1 220.1 220.2 220.8 221.7 222.9 224 223.2

47.0 46.8 46.1 45.3 44.5 43.6 42.7 41.4 39.8 36.6 30.5 19.7

3

29 June 2006

9:17 AM

®

C7 ACERT ™

INDUSTRIAL ENGINE 168 bkW (225 bhp)

RATINGS AND CONDITIONS IND - B For service where power and/or speed are cyclic (time at full load not to exceed 80%).

Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35° API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29° C (84.2° F) with a density of 838.9 g/L.

Engine Dimensions (1) Length (2) Width (3) Height

1035.6 mm 758.2 mm 1032.1 mm

Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2835788 ).

Performance Number: DM8170-00

© 2006 Caterpillar

Feature Code: C07DI00

All rights reserved.

Materials and specifications are subject to change without notice. 6757877

The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

®

C7 ACERT ™

187 bkW / 250 bhp 2200 rpm

Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 110.0 mm (4.33 in) Stroke...................................................... 127.0 mm (5.0 in) Displacement.................................................7.2 L (442 in³) Aspiration..........................................Turbocharged ATAAC Compression Ratio....................................................... 17:1 Rotation (from flywheel end).................... Counterclockwise Lube Oil System (refill)........................... 28 L (7.4 U.S. gal) Weight, Net Dry (approximate kg, lb)........ 776 kg (1,711 lb)

Image shown may not reflect actual engine

FEATURES Emissions Meets Tier 3, Stage IIIA emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. Worldwide Supplier Capability Caterpillar - Casts engine blocks and heads - Machines critical components - Assembles complete engine - Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities -Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Testing Prototype testing on every model: - proves computer design - verifies system torsional stability - functionality tests every model Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.

Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested. Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,500 dealer outlets Caterpillar factory-trained dealer technicians service every aspect of your industrial engine 99.7% of parts orders filled within 24 hours worldwide Caterpillar parts and labor warranty Preventive maintenance agreements available for repair before failure options Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition - presence of unwanted fluids - presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.

29 June 2006

9:18 AM

®

C7 ACERT ™

INDUSTRIAL ENGINE 187 bkW (250 bhp)

STANDARD ENGINE EQUIPMENT Air Inlet System Air to air aftercooled (ATAAC) Turbocharged Control System Electronic governing, PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Electronic Control Unit (ECU) Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet

Fuel System HEUI™ injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes

Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing

2

29 June 2006

9:18 AM

®

C7 ACERT ™

INDUSTRIAL ENGINE 187 bkW (250 bhp)

PERFORMANCE CURVES IND - C (Intermittent) - DM9221-00

Torque N•m

Metric

Engine Power kW

BSFC g/kW-hr

Engine Speed - rpm

Engine Speed Engine Power rpm kW 2200 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1000

187 187 187 187 187 184 180 175 167 154 114 74

Torque N•m 810 848 890 937 989 1035 1077 1115 1142 1128 906 707

BSFC g/kW-hr Fuel Rate L/hr 239.7 233.7 228.6 224.7 222.2 220.7 220 219.8 219.9 220.4 221.3 224.9

53.3 51.9 50.8 50.0 49.4 48.5 47.3 45.9 43.9 40.4 30.0 19.8

3

29 June 2006

9:18 AM

®

C7 ACERT ™

INDUSTRIAL ENGINE 187 bkW (250 bhp)

RATINGS AND CONDITIONS IND - C (Intermittent) Intermittent service where maximum power and/or speed are cyclic (time at full load not to exceed 50%).

Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35° API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29° C (84.2° F) with a density of 838.9 g/L.

Engine Dimensions (1) Length (2) Width (3) Height

1035.6 mm 758.2 mm 1032.1 mm

Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2835788 ).

Performance Number: DM9221-00

© 2006 Caterpillar

Feature Code: C07DI01

All rights reserved.

Materials and specifications are subject to change without notice. 6757572

The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

®

C9 ACERT ™

224 bkW / 300 bhp 2200 rpm

Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 110.0 mm (4.33 in) Stroke...................................................... 127.0 mm (5.0 in) Displacement..................................... 127.0 L (7,750.01 in3) Aspiration................................... Turbocharged Aftercooled Compression Ratio Rotation (from flywheel end).................... Counterclockwise Cooling System.................................13.9 liters, 3.7 gallons Lube Oil System (refill)......................32.0 liters, 8.5 gallons Weight, Net Dry (approximate kg, lb).......... 776 kg, 1711 lb Image shown may not reflect actual engine

FEATURES Emissions Meets Tier 3, Stage IIIA emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. Worldwide Supplier Capability Caterpillar - Casts engine blocks, heads, and cylinder liners - Machines critical components - Assembles complete engine - Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities -Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Testing Prototype testing on every model: - proves computer design - verifies system torsional stability - functionality tests every model Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.

Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested. Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,500 dealer outlets Caterpillar factory-trained dealer technicians service every aspect of your industrial engine 99.7% of parts orders filled within 24 hours worldwide Caterpillar parts and labor warranty Preventive maintenance agreements available for repair before failure options Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition - presence of unwanted fluids - presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.

9 December 2005

8:04 AM

®

C9 ACERT ™

INDUSTRIAL ENGINE 224 bkW (300 bhp)

STANDARD ENGINE EQUIPMENT Air Inlet System Air to air aftercooled (ATAAC) Turbocharged Control System Electronic governing, PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet

Fuel System HEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes

Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing

2

9 December 2005

8:04 AM

®

C9 ACERT ™

INDUSTRIAL ENGINE 224 bkW (300 bhp)

PERFORMANCE CURVES IND - B - DM8117-00

Torque N•m

Metric

Engine Power kW

BSFC g/kW-hr

Engine Speed - rpm

Engine Speed Engine Power rpm kW 2200 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100

224 224 224 224 224 219 212 204 197 182 168 154

Torque N•m 972 1019 1070 1126 1188 1229 1265 1300 1340 1339 1340 1340

BSFC g/kW-hr Fuel Rate L/hr 223.7 220.9 218.3 215.9 214.3 213.7 214 214.8 216.3 218.6 221.8 225.9

59.7 59.0 58.3 57.6 57.2 55.7 54.1 52.3 50.7 47.5 44.5 41.6

3

9 December 2005

8:04 AM

®

C9 ACERT ™

INDUSTRIAL ENGINE 224 bkW (300 bhp)

RATINGS AND CONDITIONS IND - B For service where power and/or speed are cyclic (time at full load not to exceed 80%).

Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35° API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29° C (84.2° F) with a density of 838.9 g/L.

Engine Dimensions (1) Length (2) Width (3) Height

1091.4 mm 827.2 mm 1022.8 mm

Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2651026 ).

Performance Number: DM8117-00

© 2005 Caterpillar

Feature Code: C09DI11

All rights reserved.

Materials and specifications are subject to change without notice. 5850302

The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

®

C9 ACERT ™

261 bkW / 350 bhp 2200 rpm

Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 110.0 mm (4.33 in) Stroke...................................................... 127.0 mm (5.0 in) Displacement..................................... 127.0 L (7,750.01 in3) Aspiration................................... Turbocharged Aftercooled Compression Ratio.................................................... 16.1:1 Rotation (from flywheel end).................... Counterclockwise Cooling System.................................13.9 liters, 3.7 gallons Lube Oil System (refill)......................32.0 liters, 8.5 gallons Weight, Net Dry (approximate kg, lb).......... 776 kg, 1711 lb Image shown may not reflect actual engine

FEATURES Emissions Meets Tier 3, Stage IIIA emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. Worldwide Supplier Capability Caterpillar - Casts engine blocks, heads, and cylinder liners - Machines critical components - Assembles complete engine - Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities -Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Testing Prototype testing on every model: - proves computer design - verifies system torsional stability - functionality tests every model Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.

Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested. Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,500 dealer outlets Caterpillar factory-trained dealer technicians service every aspect of your industrial engine 99.7% of parts orders filled within 24 hours worldwide Caterpillar parts and labor warranty Preventive maintenance agreements available for repair before failure options Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition - presence of unwanted fluids - presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.

10 March 2006

7:15 AM

®

C9 ACERT ™

INDUSTRIAL ENGINE 261 bkW (350 bhp)

STANDARD ENGINE EQUIPMENT Air Inlet System Air to air aftercooled (ATAAC) Turbocharged Control System Electronic governing, PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet

Fuel System HEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes

Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing

2

10 March 2006

7:15 AM

®

C9 ACERT ™

INDUSTRIAL ENGINE 261 bkW (350 bhp)

PERFORMANCE CURVES IND - C (Intermittent) - DM8119-00

Torque N•m

Metric

Engine Power kW

BSFC g/kW-hr

Engine Speed - rpm

Engine Speed Engine Power rpm kW 2200 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200

261 261 261 261 261 254 247 238 228 207 189

Torque N•m 1133 1187 1246 1312 1385 1428 1474 1513 1557 1517 1501

BSFC g/kW-hr Fuel Rate L/hr 222.9 219.9 218.8 218 217 215.4 213.9 213.9 215.6 218 221

69.3 68.4 68.1 67.8 67.5 65.3 63.0 60.6 58.6 53.7 49.7

3

10 March 2006

7:15 AM

®

C9 ACERT ™

INDUSTRIAL ENGINE 261 bkW (350 bhp)

RATINGS AND CONDITIONS IND - C (Intermittent) Intermittent service where maximum power and/or speed are cyclic (time at full load not to exceed 50%).

Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35° API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29° C (84.2° F) with a density of 838.9 g/L.

Engine Dimensions (1) Length (2) Width (3) Height

1091.4 mm 827.2 mm 1022.8 mm

Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2651026 ).

Performance Number: DM8119-00

© 2006 Caterpillar

Feature Code: C09DI13

All rights reserved.

Materials and specifications are subject to change without notice. 6068439

The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

®

C11 ACERT ®

261 bkW / 350 bhp 2100 rpm

Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore............................................................130 mm, 5.12 in Stroke.........................................................140 mm, 5.51 in Displacement....................................... 11.1 liters, 677 cu in Aspiration..........................................Turbocharged/ATAAC Compression Ratio.................................................... 17.8:1 Rotation (from flywheel end).................... Counterclockwise Weight, Net Dry (approximate kg, lb).......... 930 kg, 2050 lb

Image shown may not reflect actual engine

FEATURES Emissions Meets Tier 3, Stage IIIA emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. Worldwide Supplier Capability Caterpillar - Casts engine blocks, heads, and cylinder liners - Machines critical components - Assembles complete engine - Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities -Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Testing Prototype testing on every model: - proves computer design - verifies system torsional stability - functionality tests every model Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.

Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested. Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,500 dealer outlets Caterpillar factory-trained dealer technicians service every aspect of your industrial engine 99.7% of parts orders filled within 24 hours worldwide Caterpillar parts and labor warranty Preventive maintenance agreements available for repair before failure options Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition - presence of unwanted fluids - presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.

3 May 2005

2:54 AM

®

C11 ACERT ®

INDUSTRIAL ENGINE 261 bkW (350 bhp)

STANDARD ENGINE EQUIPMENT Air Inlet System Air to air aftercooled (ATAAC) Turbocharged Control System Electronic governing, PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet

Fuel System MEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT® Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes

Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing

2

3 May 2005

2:54 AM

®

C11 ACERT ®

INDUSTRIAL ENGINE 261 bkW (350 bhp)

PERFORMANCE CURVES IND - B - DM7691-00

Torque N•m

Metric

Engine Power kW

BSFC g/kW-hr

Engine Speed - rpm

Engine Speed Engine Power rpm kW 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100

261 261 261 261 258 253 245 234 215 194 164

Torque N•m 1187 1246 1312 1385 1449 1510 1560 1596 1579 1544 1424

BSFC g/kW-hr Fuel Rate L/hr 232.3 227.6 222.8 218 213.4 210 208.7 209.7 213.6 222.9 240

72.3 70.8 69.3 67.8 65.7 63.3 61.0 58.5 54.7 51.5 46.9

3

3 May 2005

2:54 AM

®

C11 ACERT ®

INDUSTRIAL ENGINE 261 bkW (350 bhp)

RATINGS AND CONDITIONS IND - B For service where power and/or speed are cyclic (time at full load not to exceed 80%).

Engine Performance Engine performance is corrected to inlet air standard conditions of 99 kPa (29.31 in Hg) dry barometer and 25Ú C (77Ú F) temperature. These values correspond to the standard atmospheric pressure and temperature as shown in SAE J1995. Performance measured using a standard fuel with fuel gravity of 35 degrees API having a lower heating value of 42,780 kJ/kg (18,390 Btu/lb) when used at 29Ú C (84.2Ú F) where the density is 838.9 g/liter (7.001 lb/U.S. gal). The corrected performance values shown for Caterpillar engines will approximate the values obtained when the observed performance data is corrected to SAE J1995, ISO 3046-2 and 8665 and 2288 and 9249 and 1585, EEC 80/1269 and DIN 70020 standard reference conditions.

Engine Dimensions (1) Length (2) Width (3) Height

1202.6 mm 1054.4 mm 1185.5 mm

Performance Number: DM7691-00 Feature Code: C11DI01 Materials and specifications are subject to change without notice. 4486531

Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2588858 ).

© 2005 Caterpillar All rights reserved. The International System of Units (SI) is used in this publication.

®

C11 ACERT ™

287 bkW / 385 bhp 2100 rpm

Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 130.0 mm (5.12 in) Stroke.................................................... 140.0 mm (5.51 in) Displacement.......................................... 11.1 L (677.36 in3) Aspiration................................... Turbocharged Aftercooled Compression Ratio.................................................... 17.2:1 Rotation (from flywheel end).................... Counterclockwise Weight, Net Dry (approximate kg, lb).......... 930 kg, 2050 lb

Image shown may not reflect actual engine

FEATURES Emissions Meets Tier 3, Stage IIIA emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. Worldwide Supplier Capability Caterpillar - Casts engine blocks, heads, and cylinder liners - Machines critical components - Assembles complete engine - Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities -Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Testing Prototype testing on every model: - proves computer design - verifies system torsional stability - functionality tests every model Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.

Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested. Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,500 dealer outlets Caterpillar factory-trained dealer technicians service every aspect of your industrial engine 99.7% of parts orders filled within 24 hours worldwide Caterpillar parts and labor warranty Preventive maintenance agreements available for repair before failure options Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition - presence of unwanted fluids - presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.

14 February 2006

4:12 AM

®

C11 ACERT ™

INDUSTRIAL ENGINE 287 bkW (385 bhp)

STANDARD ENGINE EQUIPMENT Air Inlet System Air to air aftercooled (ATAAC) Turbocharged Control System Electronic governing, PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet

Fuel System MEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes

Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing

2

14 February 2006

4:12 AM

®

C11 ACERT ™

INDUSTRIAL ENGINE 287 bkW (385 bhp)

PERFORMANCE CURVES IND - C (Intermittent) - DM7692-01

Torque N•m

Metric

Engine Power kW

BSFC g/kW-hr

Engine Speed - rpm

Engine Speed Engine Power rpm kW 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100

287 287 287 287 284 278 269 258 236 213 180

Torque N•m 1305 1370 1443 1523 1595 1659 1712 1760 1734 1695 1563

BSFC g/kW-hr Fuel Rate L/hr 228.7 224.9 221.2 217.6 214.1 211.8 211.7 213.1 216.3 223.6 237.8

78.2 77.0 75.7 74.4 72.5 70.2 67.9 65.5 60.9 56.8 51.0

3

14 February 2006

4:12 AM

®

C11 ACERT ™

INDUSTRIAL ENGINE 287 bkW (385 bhp)

RATINGS AND CONDITIONS IND - C (Intermittent) Intermittent service where maximum power and/or speed are cyclic (time at full load not to exceed 50%).

Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35° API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29° C (84.2° F) with a density of 838.9 g/L.

Engine Dimensions (1) Length (2) Width (3) Height

1202.6 mm 1054.4 mm 1185.5 mm

Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2588858 ).

Performance Number: DM7692-01

© 2006 Caterpillar

Feature Code: C11DI02

All rights reserved.

Materials and specifications are subject to change without notice. 6068361

The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

®

C13 ACERT ™

310 bkW / 415 bhp 2100 rpm

Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 130.0 mm (5.12 in) Stroke.................................................... 157.0 mm (6.18 in) Displacement............................................ 12.5 L (762.8 in3) Aspiration................................... Turbocharged Aftercooled Compression Ratio....................................................... 17.3 Rotation (from flywheel end).................... Counterclockwise Weight, Net Dry (approximate kg, lb).......... 939 kg, 2070 lb

Image shown may not reflect actual engine

FEATURES Emissions Meets Tier 3, Stage IIIA emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. Worldwide Supplier Capability Caterpillar - Casts engine blocks, heads, and cylinder liners. - Machines critical components - Assembles complete engine Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Factory-designed systems built at Caterpillar ISO certified facilities. Testing Prototype testing on every model: - proves computer design - verifies system torsional stability - tests functionality on every model Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.

Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested. Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,500 dealer outlets. Caterpillar factory-trained dealer technicians service every aspect of your industrial engine. 99.7% of parts orders filled within 24 hours worldwide. Caterpillar parts and labor warranty. Preventive maintenance agreements available for repair before failure options. Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition - presence of unwanted fluids - presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.

23 March 2006

1:51 AM

®

C13 ACERT ™

INDUSTRIAL ENGINE 310 bkW (415 bhp)

STANDARD ENGINE EQUIPMENT Air Inlet System Air to air aftercooled (ATAAC) Turbocharged Control System Electronic governing, PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet

Fuel System MEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes

Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing

2

23 March 2006

1:51 AM

®

C13 ACERT ™

INDUSTRIAL ENGINE 310 bkW (415 bhp)

PERFORMANCE CURVES IND - B - DM7686-01

Torque N•m

Metric

Engine Power kW

BSFC g/kW-hr

Engine Speed - rpm

Engine Speed Engine Power rpm kW 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200

310 310 310 310 306 300 291 278 255 230

Torque N•m 1408 1478 1556 1642 1720 1788 1849 1897 1873 1830

BSFC g/kW-hr Fuel Rate L/hr 217.8 213.3 209.3 206.3 205.4 205.3 205.2 204.9 204.6 204.3

80.4 78.7 77.2 76.1 75.0 73.3 71.1 67.9 62.2 56.0

3

23 March 2006

1:51 AM

®

C13 ACERT ™

INDUSTRIAL ENGINE 310 bkW (415 bhp)

RATINGS AND CONDITIONS IND - B For service where power and/or speed are cyclic (time at full load not to exceed 80%).

Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35° API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29° C (84.2° F) with a density of 838.9 g/L.

Engine Dimensions (1) Length (2) Width (3) Height

1202.6 mm 1007.2 mm 1185.5 mm

Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2588857 ).

Performance Number: DM7686-01

© 2006 Caterpillar

Feature Code: C13DI01

All rights reserved.

Materials and specifications are subject to change without notice. 6286281

The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

®

C13 ACERT ™

328 bkW / 440 bhp 2100 rpm

Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 130.0 mm (5.12 in) Stroke.................................................... 157.0 mm (6.18 in) Displacement............................................ 12.5 L (762.8 in3) Aspiration................................... Turbocharged Aftercooled Compression Ratio....................................................... 17.3 Rotation (from flywheel end).................... Counterclockwise Weight, Net Dry (approximate kg, lb).......... 939 kg, 2070 lb

Image shown may not reflect actual engine

FEATURES Emissions Meets Tier 3, Stage IIIA emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. Worldwide Supplier Capability Caterpillar - Casts engine blocks, heads, and cylinder liners. - Machines critical components - Assembles complete engine Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Factory-designed systems built at Caterpillar ISO certified facilities. Testing Prototype testing on every model: - proves computer design - verifies system torsional stability - tests functionality on every model Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.

Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested. Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,500 dealer outlets. Caterpillar factory-trained dealer technicians service every aspect of your industrial engine. 99.7% of parts orders filled within 24 hours worldwide. Caterpillar parts and labor warranty. Preventive maintenance agreements available for repair before failure options. Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition - presence of unwanted fluids - presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.

27 January 2006

7:32 AM

®

C13 ACERT ™

INDUSTRIAL ENGINE 328 bkW (440 bhp)

STANDARD ENGINE EQUIPMENT Air Inlet System Air to air aftercooled (ATAAC) Turbocharged Control System Electronic governing, PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet

Fuel System MEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes

Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing

2

27 January 2006

7:32 AM

®

C13 ACERT ™

INDUSTRIAL ENGINE 328 bkW (440 bhp)

PERFORMANCE CURVES IND - C (Intermittent) - DM7687-02

Torque N•m

Metric

Engine Power kW

BSFC g/kW-hr

Engine Speed - rpm

Engine Speed Engine Power rpm kW 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100 1000 900 700

328 328 328 328 325 318 308 295 270 244 206 172 137 88

Torque N•m 1492 1567 1649 1741 1824 1896 1961 2011 1985 1940 1791 1642 1449 1194

BSFC g/kW-hr Fuel Rate L/hr 219.6 216.6 214.3 212.5 211 209.5 207.9 206.4 205.2 204 203 202.3 204.8 225.2

85.9 84.7 83.8 83.1 81.7 79.3 76.3 72.5 66.1 59.3 49.9 41.5 33.3 23.5

3

27 January 2006

7:32 AM

®

C13 ACERT ™

INDUSTRIAL ENGINE 328 bkW (440 bhp)

RATINGS AND CONDITIONS IND - C (Intermittent) Intermittent service where maximum power and/or speed are cyclic (time at full load not to exceed 50%).

Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35° API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29° C (84.2° F) with a density of 838.9 g/L.

Engine Dimensions (1) Length (2) Width (3) Height

1202.6 mm 1007.2 mm 1185.5 mm

Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2588857 ).

Performance Number: DM7687-02

© 2006 Caterpillar

Feature Code: C13DI02

All rights reserved.

Materials and specifications are subject to change without notice. 6068390

The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Industrial Engine

C6.6 ACERT™

90-186 bkW/121-250 bhp

2200 rpm

CATERPILLAR® ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore . . . . . . . . . . . . . . . . . . . . . . . . 105.0 mm (4.13 in) Stroke . . . . . . . . . . . . . . . . . . . . . . . 127.0 mm (5.0 in) Displacement . . . . . . . . . . . . . . . . . . . 6.6 L (402.8 in3) Aspiration . . . . . Turbocharged Air-to-Air Aftercooled Compression Ratio . . . . . . . . . . . . . . . . . . . . . . 16.7:1 Combustion System . . . . . . . . . . . . . . Direct Injection Rotation (from flywheel end) . . . . . Counterclockwise Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . Water Engine Weight, Net Dry (approximate). . . . . . . . . . . . . . . . . 590 kg (1,122 lb) Image shown may not reflect actual engine

FEATURES Emissions Meets Tier 3, Stage IIIA emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. Worldwide Supplier Capability Caterpillar – Casts engine blocks, heads, and cylinder liners – Machines critical components – Assembles complete engine Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities. Testing Prototype testing on every model: – proves computer design – verifies system torsional stability – tests functionality on every model Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.

LEHH4593-03

Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,500 dealer outlets Caterpillar factory-trained dealer technicians service every aspect of your industrial engine 99.7% of parts orders filled within 24 hours worldwide Caterpillar parts and labor warranty Preventive maintenance agreements available for repair before failure options Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: – internal engine component condition – presence of unwanted fluids – presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.

Industrial Engine 90-186 bkW/ 121-250 bhp

C6.6 ACERT™ STANDARD ENGINE EQUIPMENT Air Inlet System Turbocharged air-to-air aftercooled Control System Electronic governing, PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet

Fuel System Caterpillar Single Fluid Injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes

Exhaust System Exhaust manifold, dry Optional exhaust outlet

Length

929 mm (36.6 in)

Width

668 mm (26.3 in)

Flywheels and Flywheel Housing SAE No. 2/3 Flywheel Housing

Height

797 mm (31.4 in)

Power Take Off SAE A/SAE B PTO

ENGINE DIMENSIONS

Final weight and dimensions will depend on completed specification.

INDUSTRIAL RATINGS AND CONDITIONS IND – C (Intermittent) is the horsepower and speed capability of the engine where maximum power and/or speed are cyclic (time at full load not to exceed 50%). Additional ratings are available for specific customer requirements. Consult your Caterpillar dealer.

Materials and specifications are subject to change without notice. LEHH4593-03 (9-05)

Rating Conditions for Diesel Engines – up to 6.6 liter. All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to specification EPA 2D 89.330-96 with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F).

The International System of Units (SI) is used in this publication.

Printed in U.S.A. Information contained in this publication may be considered confidential. Discretion is recommended when distributing. CAT, CATERPILLAR, ACERT, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

©2005 Caterpillar

All rights reserved.