1.p.alexander Front Page Phase - Ii.docx

DESIGN AND FABRICATION OF PNEUMATIC AIR ENGINE A THESIS Submitted by

P.ALEXANDER(612616410002) in partial fulfillment for the award of the degree of

MASTER OF ENGINEERING IN MANUFACTURING ENGINEERING

THE KAVERY COLLEGE OF ENGINEERING DEPARTMENT OF AUTOMOBILE ENGINEERING ANNA UNIVERSITY, CHENNAI DECEMBER 2018

i

BONAFIDE CERTIFICATE

Certified that this report titled “DESIGN AND FABRICATION OF PNEUMATIC AIR ENGINE ” is the bonafide work of P.ALEXANDER(612616410002) who carried out the work under my supervision. Certified further that to the best of my knowledge the work reported here in does not form part of any other thesis or dissertation on the basis of which a degree or award was conferred on an earlier occasion on this or any other candidate.

SIGNATURE

SIGNATURE

Mr.E.R.SIVAKUMAR.,ME.,(Ph.D.).,

Mr.MARUTHAPANDIYAN.,M.E.,(Ph.D.).,

HEAD OF THE DEPARTMENT

SUPERVISOR

Associate Professor,

Assistant Professor,

Department of Automobile Engineering

Department of Mechanical Engineering

The Kavery College Of Engineering ,

The Kavery College Of Engineering,

Mecheri – 636 453.

Mecheri – 636 453.

Submitted for the Project Phase – II Examination held on _______________

INTERNAL EXAMINER

EXTERNAL EXAMINER

ii

ACKNOWLEDGEMENT At this pleasing movement of having successfully completed our project work, I wish to convey my sincere thanks and gratitude to the management of our college and our honourable

chairman

and

advisor

Prof.Dr.A.K.NATESAN

and

chairman

Thiru.A.ANBALAGAN who provide all the facilities to us . we express our thanks to our secretary Prof.S.ELANGOVAN and co-coordinate Mrs.S.REVATIELANGOVAN for their inspiring support I extended our sincere thanks to our beloved Dean Prof.S.OBLI for encouraging us to do this project. I have immense pleasure in expressing my thanks to principal Prof.Dr.V.KARUPANNAN., for the facility made available for the competition of this project work I

express

my

profound

sense

of

our

Head

of

the

Department

Mr.E.R.SIVAKUMAR.,ME.,(Ph.D)., Associate professor in Department of Automobile Engineering , for providing all the facilities and giving permission to proceed i my thesis work I would like a great deal to express my thanks to my project guide Mr.MARUTHAPANDIYAN.,M.E.,(Ph.D.).,

Assistant

Professor

in

Department

of

Automobile engineering for his support, valuable guidance ad constant encouragement during the course of the thesis My sincere thanks to our Friends, Teaching, Non-teaching staff members and the well-wishers for their constant support at all the time.

iii