12 Hand & Power Tools

Section Twelve

Hand & power tools Drill Bits

282

Driver Bits

286

Holesaws

287

Core Drills

290

Hand Tools

291

Magnetic Core Drills

294

Pipe Polishers

302

Grit Linishers and Deburrers

302

Angle Grinders

307

Accessories

309

Compartment Boxes

310

Extraction Fans

310

Magnetic Squares & Clamps

311

Tape Measures

316

Knives

317

Air Tools

319

Cylinder Brackets

319

Pipe Clamps

320

Line Cutters

321

281

282

SECTION TWELVE – HAND & POWER TOOLS

HAND AND power tools IMPERIAL JOBBER DRILL BITS HSS TiN Coated • HSS Titanium Nitride Coated – hardens surface, increasing lubricity, thus extending drill life. • 135˚ Point Angle - faster cut than standard 118˚ angle • Split Point penetrates on contact and prevents wandering • Supplied in Industrial Hang Pack PN:

PRODUCT:

9LI164 9LI132 9LI116 9LI564 9LI332 9LI764 9LI18 9LI964 9LI532 9LI1164 9LI316 9LI1364 9LI732 9LI1564 9LI14 9LI1764 9LI932 9LI1964 9LI516 9LI2164 9LI1132 9LI2364 9LI38 9LI2564 9LI1332 9LI2764 9LI716 9LI2964 9LI1532 9LI3164 9LI12

JOBBER DRILL BIT – 1/64” JOBBER DRILL BIT – 1/32” JOBBER DRILL BIT – 1/16” JOBBER DRILL BIT – 5/64” JOBBER DRILL BIT – 3/32” JOBBER DRILL BIT – 7/64” JOBBER DRILL BIT – 1/8” JOBBER DRILL BIT – 9/64” JOBBER DRILL BIT – 5/32” JOBBER DRILL BIT – 11/64” JOBBER DRILL BIT – 3/16” JOBBER DRILL BIT – 13/64” JOBBER DRILL BIT – 7/32” JOBBER DRILL BIT – 15/64” JOBBER DRILL BIT – ¼” JOBBER DRILL BIT – 17/64” JOBBER DRILL BIT – 9/32” JOBBER DRILL BIT – 19/64” JOBBER DRILL BIT – 5/16” JOBBER DRILL BIT – 21/64” JOBBER DRILL BIT – 11/32” JOBBER DRILL BIT – 23/64” JOBBER DRILL BIT – 3/8” JOBBER DRILL BIT – 25/64” JOBBER DRILL BIT – 13/32” JOBBER DRILL BIT – 27/64” JOBBER DRILL BIT – 7/16” JOBBER DRILL BIT – 29/64” JOBBER DRILL BIT – 15/32” JOBBER DRILL BIT – 31/64” JOBBER DRILL BIT – ½”

PACKET SIZE: 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1

HAND AND power tools

PN:

PRODUCT:

9LM010 9LM015 9LM020 9LM025 9LM026 9LM028 9LM030 9LM032 9LM033 9LM034 9LM035 9LM036 9LM037 9LM038 9LM039 9LM040 9LM041 9LM042 9LM043 9LM045 9LM048 9LM049 9LM050 9LM055 9LM058 9LM060 9LM065 9LM067 9LM070 9LM071 9LM075 9LM080 9LM085 9LM090 9LM095 9LM100 9LM105 9LM110 9LM115 9LM120 9LM125 9LM130 9LM135R 9LM140R 9LM145R 9LM150R 9LM160R 9LM170R 9LM175R

JOBBER DRILL BIT – 1.0mm JOBBER DRILL BIT – 1.5mm JOBBER DRILL BIT – 2.0mm JOBBER DRILL BIT – 2.5mm JOBBER DRILL BIT – 2.6mm JOBBER DRILL BIT – 2.8mm JOBBER DRILL BIT – 3.0mm JOBBER DRILL BIT – 3.2mm JOBBER DRILL BIT – 3.3mm JOBBER DRILL BIT – 3.4mm JOBBER DRILL BIT – 3.5mm JOBBER DRILL BIT – 3.6mm JOBBER DRILL BIT – 3.7mm JOBBER DRILL BIT – 3.8mm JOBBER DRILL BIT – 3.9mm JOBBER DRILL BIT – 4.0mm JOBBER DRILL BIT – 4.1mm JOBBER DRILL BIT – 4.2mm JOBBER DRILL BIT – 4.3mm JOBBER DRILL BIT – 4.5mm JOBBER DRILL BIT – 4.8mm JOBBER DRILL BIT – 4.9mm JOBBER DRILL BIT – 5.0mm JOBBER DRILL BIT – 5.5mm JOBBER DRILL BIT – 5.8mm JOBBER DRILL BIT – 6.0mm JOBBER DRILL BIT – 6.5mm JOBBER DRILL BIT – 6.7mm JOBBER DRILL BIT – 7.0mm JOBBER DRILL BIT – 7.1mm JOBBER DRILL BIT – 7.5mm JOBBER DRILL BIT – 8.0mm JOBBER DRILL BIT – 8.5mm JOBBER DRILL BIT – 9.0mm JOBBER DRILL BIT – 9.5mm JOBBER DRILL BIT – 10mm JOBBER DRILL BIT – 10.5mm JOBBER DRILL BIT – 11.0mm JOBBER DRILL BIT – 11.5mm JOBBER DRILL BIT – 12.0mm JOBBER DRILL BIT – 12.5mm JOBBER DRILL BIT – 13.0mm JOBBER DRILL BIT - 13.5mm Reduced Shank ½” JOBBER DRILL BIT – 14mm Reduced Shank ½” JOBBER DRILL BIT – 14.5mm Reduced Shank ½” JOBBER DRILL BIT – 15mm Reduced Shank ½” JOBBER DRILL BIT – 16mm Reduced Shank 5/8” JOBBER DRILL BIT – 17mm Reduced Shank ½” JOBBER DRILL BIT – 17.5mm Reduced Shank ½”

PACKET SIZE: 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1

SECTION TWELVE – HAND & POWER TOOLS

METRIC JOBBER DRILL BITS HSS TiN Coated • HSS Titanium Nitride Coated – hardens surface, increasing lubricity, thus extending drill life. • 135˚ Point Angle - faster cut than standard 118˚ angle • Split Point penetrates on contact and prevents wandering • Supplied in Industrial Hang Pack

283

SECTION TWELVE – HAND & POWER TOOLS

HAND AND power tools Double Ended Panel Drills HSS Titanium Nitride Coated with 135° Split Points

PN:

Drill Dia. Drill Dia. mm/inches Gauge

Overall Cut Depth Length mm mm

9DI18 9D30 9D20 9D11

3.17 1/8” 3.26 1/8” 4.09 5/32” 4.85 3/16”

13 51 60 60

51 30 20 11

DRILL BIT SETS • HSS Titanium Nitride Coated with 135˚ Split Points • Strong, rugged metal case • Black case metric, Grey case imperial PN:

PRODUCT:

SM25 SI29

METRIC SET 1 to 13mm - in 0.5mm Steps IMPERIAL SET 1/16” to ½” – in 1/64” Steps

284

STEP DRILLS • HSS Titanium Coated • Self start points • Automatically deburs holes • Individual drills supplied in sealed plastic tube • 3 Piece set supplied in robust metal case PN:

PRODUCT:

9STM4-12 9STM4-20 9STM6-30 STPSET

STEP DRILL 4 – 12mm STEP DRILL 4 – 20mm STEP DRILL 6 – 30mm 3 Piece STEP DRILL Set

10 13 16 16

Packet Size

10 10 10

135° split point cuts faster & reduces wondering superior HSS raw material Titanium Nitride coated reduces heat extending life Fully ground for maximum performance & clip removal

4+ flute design + centering chisel head. Made in Germany

drill and countersink in one

SECTION TWELVE – HAND & POWER TOOLS

THEHOLEADVANTAGE

Range of metric and imperial sets available

285

Full ranges of all Sterling and Alpha Products are available - please enquire.

SECTION TWELVE – HAND & POWER TOOLS

Driver bits TORX INSERT BITS • ¼” Torx socket drive insert and power bits • Product supplied in resealable pack • All bits are magnetised • Pack quantity of 10 PN:

DESCRIPTION:

TX825S TX1025S TX1525S TX2025S

T-8 x 25mm T-10 x 25mm T-15 x 25mm T-20 x 25mm

PHILLIPS ® INSERT BITS • ¼” Universal insert bits • Product supplied in resealable pack • All bits are magnetised • Pack quantity of 10 PN:

DESCRIPTION:

PH125S PH225S PH325S

PH1 x 25mm PH2 x 25mm PH3 x 25mm

PHILLIPS ® POWER BITS • ¼” Universal insert bits • Product supplied in resealable pack • All bits are magnetised • Pack quantity of 10 PN:

DESCRIPTION:

PH150S PH250S PH275S

PH1 x 50mm PH2 x 50mm PH2 x 75mm

QUICK RELEASE BIT HOLDER • ¼” Professional magnetic bit holder with spring loaded quick release • Product supplied in resealable pack • Pack quantity of 1 PN:

DESCRIPTION:

MBHQR65

65mm QUICK RELEASE BIT HOLDER

ADAPTORS FOR HEX DRIVE • ¼” drive to square drive adaptor • Product supplied in resealable pack • Pack quantity of 10 PN:

DESCRIPTION:

ADP1/4-65 ¼” x 65mm ADAPTOR for HEX DRIVE

286

PHILLIPS ® DOUBLE ENDED BITS • ¼” Double ended bit • Supplied in industrial hang pack • All bits are magnetised • Pack quantity of 10 PN:

DESCRIPTION:

PH2150D

PH2 x 150mm

HAND AND power tools

PN:

DESCRIPTION:

NS865 NS765 NS51665 NS3865 NS71665 NS1465

8mm x 65mm 7mm x 65mm 5/16” x 65mm 3/8” x 65mm 7/16” x 65mm ¼” x 65mm

HOLESAWS BI-METAL GOLD SERIES • 4/6 Variable tooth • 35mm (1 3/8”) Cutting depth • Clamshell hang pack • Individually packaged PN:

HOLESAW DIA. mm, in

PN:

HOLESAW DIA. mm, in

HSV14 HSV16 HSV17 HSV19 HSV20 HSV21 HSV22 HSV24 HSV25 HSV27 HSV29 HSV30 HSV32 HSV33 HSV35 HSV37 HSV38 HSV40 HSV41 HSV43 HSV44 HSV45 HSV46 HSV48 HSV50 HSV51 HSV52 HSV54 HSV55

14mm, 9/16” 16mm, 5/8” 17mm, 11/16” 19mm, ¾” 20mm 21mm, 13/16” 22mm, 7/8” 24mm, 15/16” 25mm, 1” 27mm, 1 1/16” 29mm, 1 1/8” 30mm, 1 3/16” 32mm, 1 ¼” 33mm, 1 5/16” 35mm, 1 3/8” 37mm, 1 7/16” 38mm, 1 ½” 40mm, 1 9/16” 41mm, 1 5/8” 43mm, 1 11/16” 44mm, 1 ¾” 45mm, 1 25/32” 46mm, 1 13/16” 48mm, 1 7/8” 50mm, 1 31/32” 51mm, 2” 52mm, 2 1/16” 54mm, 2 1/8” 55mm, 2 5/32”

HSV57 HSV59 HSV60 HSV64 HSV65 HSV67 HSV68 HSV70 HSV73 HSV75 HSV76 HSV79 HSV83 HSV86 HSV89 HSV92 HSV95 HSV98 HSV100 HSV102 HSV105 HSV108 HSV114 HSV121 HSV127 HSV140 HSV146 HSV152

57mm, 2 ¼” 59mm, 2 5/16” 60mm, 2 3/8” 64mm, 2 ½” 65mm, 2 9/16” 67mm, 2 5/8” 68mm, 2 21/32” 70mm, 2 ¾” 73mm, 2 7/8” 75mm, 2 15/16” 76mm, 3” 79mm, 3 1/8” 83mm, 3 ¼” 86mm, 3 3/8” 89mm, 3 ½” 92mm, 3 5/8” 95mm, 3 ¾” 98mm, 3 7/8” 100mm, 3 15/16” 102mm, 4” 105mm, 4 1/8” 108mm, 4 ¼” 114mm, 4 ½” 121mm, 4 3/4” 127mm, 5” 140mm, 5 ½” 146mm, 5 ¾” 152mm, 6”

SECTION TWELVE – HAND & POWER TOOLS

MAGNETIC NUTSETTER • ¼” Hex drive magnetic nutsetter • Product supplied in resealable pack • Pack quantity of 10

ARBOR – UNIVERSAL SIZING • Arbors to suit all holesaws • Individually packaged PN:

DESCRIPTION:

ARB-1 ARB-2 PLD-1 PLD-2

Arbor – SML, Hex shank, suits 10mm chucks Arbor – LGE, Hex shank, suits 10mm chucks 3 ¼” Pilot hole drill – Fits small arbors 4 ¼” Pilot hole drill – Fits large arbors

10-30mm 32-198mm

287

SECTION TWELVE – HAND & POWER TOOLS

Giving you the edge!

8M Professional Rubber Grip Tape Measure Ultimate Quality Blade, Markings & Gripper End Hook

Metal core Hi-Tension frame Quick release Rubber Grip Holds blade at 90° or 45° PROFESSIONAL SERIES

10 Heavy Duty Blades

All-Metal Screw-Lock Snap Cutter Ergonomic with Rubber

Auto-Loading Retractable Knife, 5 Blade Magazine

100 heavy duty blades Superior Quality Made in Sheffield, England

Full ranges of all Sterling and Alpha Products are available - please enquire.

THEHOLEADVANTAGE

288

Broch Drills with multifit shank

Cobalt Bi-Metal Holesaws with Variable Teeth

BI-METAL HOLESAWS

‘TA’ series: The Real McCoy Variable Pitch Bi-Metal Hole Saw, deep- cutting with Built-In Arbor. The Real McCoy Hole Saws cut wood, plastic, or any machineable metal including cast iron and stainless steel. More importantly, they’ll cut your operating costs! Labour and Tool Cost Savings From: • Faster Cutting - Cuts faster than 6 pitch saws in most applications • Longer Life - Outlasts 6 pitch hole saws in most applications • Built in Arbor - Elimination of separate arbors can cut up to 40% off your total hole sawing costs. Check your own ratio of arbor versus hole saw purchases No more wasted time searching for arbors, changing arbors, or waiting for arbors. • Hole Saws available up to 6” (150mm) • Cuts through 2” X 4” joists and most doors in one pass with extra clearance • 1 7/8” cutting depth, M3 cutting edge and 4/6 variable pitch • High Wear Resistance • Reduces vibration ‘TA’ Series Display Boards Available up to 4” or 6”: TAFO4 contains: TA10 5/8” TA11 1 1/16” TA12 3/4” TA14 7/8” TA15 1 5/16” TA16 1” TA17 1 1/16” TA18 1 1/8” TA19 1 3/16” TA20 1 1/4” TA21 1 5/16” TA22 1 3/8” TA24 1 1/2” TA26 1 5/8” TA28 1 3/4” TA30 1 7/8” TA32 2” TA33 2 1/16” TA34 2 1/8” TA36 2 1/4” TA38 2 3/8” TA40 2 1/2” TA42 2 5/8” TA44 2 3/4” TA46 2 7/8” TA48 3” TA50 3 1/8” TA52 3 1/4” TA56 3 1/2” TA64 4” ME12 Extension Arbor 10 Carded Pilot Drills

TAF06 contains as above plus: TA66 TA72 TA76 TA80 TA88 TA96

4 1/8” 4 1/2” 4 3/4” 5” 5 ½” 6”

Designed for Plumbers, Electricians, Industrial and General Purpose Maintenance. Designed for applications in Construction Industry and Automotive markets. ‘TA’ series Hole Saw Kits TA01 Maintenance Hole Saw TA01 Maintenance Hole Saw Kit Contains: TA12 TA22 TA14 TA24 TA18 TA28 4 Pilot Drills ME12 Extension arbor Screwdriver

TA32 TA36 TA40

SECTION TWELVE – HAND & POWER TOOLS

BI-METAL HOLE SAWS – MORSE

TA04P PLUMBERS Hole Saw Kit Contains: TA12 TA14 3 Pilot Drills

TA18 TA24

TA28 TA36

TA05M MECHANICS Hole saw Kit Contains: TA14 TA16 TA24 1 Pilot Drill

TA18 TA20

289

SECTION TWELVE – HAND & POWER TOOLS

Core Drills GOLD SERIES CORE DRILLS Cutting Depth 30mm • Universal shank fitting 19mm • Suitable for : Alfra (incl.Rota-Quick), BDS (incl.keyless), Bux, Ruko, Magnetor, Euroboor, Jancy, Hougen, Magtron, Promag, Rotabroach, Nitto One-Touch. • 30mm Cutting Depth Cutting Depth 55mm • Universal shank fitting 19mm • Suitable for: Alfra (incl.Rota-Quick), BDS (incl.keyless), Bux, Ruko, Magnetor, Euroboor, Jancy, Hougen, Magtron, Promag, Rotabroach, Nitto One-Touch. • 55mm Cutting Depth Cutting Depth 110mm • Universal shank fitting 19mm • Suitable for: Alfra (incl.Rota-Quick), BDS (incl.keyless), Bux, Ruko, Magnetor, Euroboor, Jancy, Hougen, Magtron, Promag, Rotabroach, Nitto One-Touch. • 110mm Cutting Depth

SIZE Dia.:

Cutting Depth 30mm PN:

Cutting Depth 55mm PN:

Cutting Depth 110mm PN:

12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 25mm 26mm 27mm 28mm 29mm 30mm 31mm 32mm 33mm 34mm 35mm 36mm 37mm 38mm 39mm 40mm 41mm 42mm 43mm 44mm 45mm 46mm 47mm 48mm 49mm 50mm 51mm 52mm 53mm 54mm 55mm 56mm 57mm 58mm 59mm 60mm

20.1260U12 20.1260U13 20.1260U14 20.1260U15 20.1260U16 20.1260U17 20.1260U18 20.1260U19 20.1260U20 20.1260U21 20.1260U22 20.1260U23 20.1260U24 20.1260U25 20.1260U26 20.1260U27 20.1260U28 20.1260U29 20.1260U30 20.1260U31 20.1260U32 20.1260U33 20.1260U34 20.1260U35 20.1260U36 20.1260U37 20.1260U38 20.1260U39 20.1260U40 20.1260U41 20.1260U42 20.1260U43 20.1260U44 20.1260U45 20.1260U46 20.1260U47 20.1260U48 20.1260U49 20.1260U50 20.1260U51 20.1260U52 20.1260U53 20.1260U54 20.1260U55 20.1260U56 20.1260U57 20.1260U58 20.1260U59 20.1260U60

20.1270U12 20.1270U13 20.1270U14 20.1270U15 20.1270U16 20.1270U17 20.1270U18 20.1270U19 20.1270U20 20.1270U21 20.1270U22 20.1270U23 20.1270U24 20.1270U25 20.1270U26 20.1270U27 20.1270U28 20.1270U29 20.1270U30 20.1270U31 20.1270U32 20.1270U33 20.1270U34 20.1270U35 20.1270U36 20.1270U37 20.1270U38 20.1270U39 20.1270U40 20.1270U41 20.1270U42 20.1270U43 20.1270U44 20.1270U45 20.1270U46 20.1270U47 20.1270U48 20.1270U49 20.1270U50 20.1270U51 20.1270U52 20.1270U53 20.1270U54 20.1270U55 20.1270U56 20.1270U57 20.1270U58 20.1270U59 20.1270U60

20.1280U12 20.1280U13 20.1280U14 20.1280U15 20.1280U16 20.1280U17 20.1280U18 20.1280U19 20.1280U20 20.1280U21 20.1280U22 20.1280U23 20.1280U24 20.1280U25 20.1280U26 20.1280U27 20.1280U28 20.1280U29 20.1280U30 20.1280U31 20.1280U32 20.1280U33 20.1280U34 20.1280U35 20.1280U36 20.1280U37 20.1280U38 20.1280U39 20.1280U40 20.1280U41 20.1280U42 20.1280U43 20.1280U44 20.1280U45 20.1280U46 20.1280U47 20.1280U48 20.1280U49 20.1280U50 20.1280U51 20.1280U52 20.1280U53 20.1280U54 20.1280U55 20.1280U56 20.1280U57 20.1280U58 20.1280U59 20.1280U60

290

•

hand tools

TELESCOPIC MIRROR • Fully flexible shaft with fixed mirror head 55mm dia • Plated finish with plastic grip • Shaft length 470mm PN: 8032 DESCRIPTION: Inspection Mirror 470mm long 55mm dia. WIA WELDING GUIDE HANDBOOK • Welding Products and Technical Reference PN: WGH DESCRIPTION: The Australian Welding Guide

SECTION TWELVE – HAND & POWER TOOLS

MIG WELDING PLIERS • Manufactured from forged carbon steel hardened and tempered • Incorporating a hammer, wire cutter and long nose • PVC dipped spring-loaded handles for user comfort • 205mm long 72mm wide 49.9mm max jaw opening PN: MW171020 DESCRIPTION: MIG welding pliers 205mm (8 ¼”)

291

SECTION TWELVE – HAND & POWER TOOLS

ALFRA Rotabest

Magnetic Base Drills Drilling Solutions

Made in Germany

Master Taper Up to ø100mm Core Drill Capacity

Part No. 18630

King Magn of et Drillsic

4 Accepts Standard Cutters

V32 Compact

Part No. 18710

292

ø12-32mm Core Drill Capacity

SECTION TWELVE – HAND & POWER TOOLS

Cut your workload with efficient, reliable

& Proven Machinery

Solutions fOR ALL YOUR

CUTTING AND DRILLING Applications

293

SECTION TWELVE – HAND & POWER TOOLS

ALFRA – ROTABEST

CORE DRILL PICCOLO SET PN: 18535 • 12mm – 40mm Ø Core Drill Capacity • Portable core drilling machine only 10.6kg • Most compact drill on the market • Solid brass guides • 100mm – 200mm height adjustment • New rota quick change system • Durable keyboard • 1050 watt motor • 400 RPM • 8000N magnetic adhesion • 50mm core drill cutting depth • 132mm stroke • Integrated cooling system with coolant unit • Safety belt ALL CONTAINED IN A PLASTIC TRANSPORT CASE

MINI SET PN: 18540 • 12mm – 50mm Ø Core Drill Capacity • Reliable work horse • Durable keyboard • Powerful 1200 watt motor • 2 speed gearbox 280/500 RPM • 12000N magnetic adhesion • 35mm core drill cutting depth • 150mm stroke • 19mm Weldon direct arbor • Integrated coolant system with coolant unit • Safety bolt • Only 15kg weight ALL CONTAINED IN A PLASTIC TRANSPORT CASE

NEW GEN 50RQ

294

PN: 18610 • 12mm – 50mm Ø Core Drill Capacity • Solid brass guides • 160mm – 260mm height adjustment • New 3 coil magnetic power increase magnet • New rota quick change system • Durable keyboard • Powerful 1200 watt motor • 2 speed gearbox 250 / 450 RPM • 16000N magnetic adhesion • 50mm core drill cutting depth • 170mm stroke • Accepts tapping chuck • Integrated cooling system with coolant unit • Safety belt • Only 16kg ALL CONTAINED IN A PLASTIC TRANSPORT CASE LATEST TECHNOLOGY IN MAGNETIC DRILLS

ALFRA – ROTABEST

PN: 18625 • Up to 80mm Ø core drill capacity • Solid brass guides • 226mm – 286mm height adjustment • New 3 coil magnetic power increase magnet • Durable keyboard • No.3 Morse taper • Powerful 1800 watt motor • Gearbox with clutch • 4 speed gearbox 110, 175, 245, 385 RPM • 20000N magnetic adhesion • Adjustable magnet foot 30˚ to left + right • 200mm stroke • 110mm core drilling depth (with AMK 3L) • Safety belt • Only 22kg ALL CONTAINED IN A PLASTIC TRANSPORT CASE • Coolant unit, toolholder and cutter are optional extras 80mm CAPACITY

MASTER TAPER PN: 18630 • Over 100mm Ø core drill capacity • Solid brass guides • 295mm – 400mm height adjustment • New 3 coil magnetic power increase magnet • Durable keyboard • No.3 morse taper • Powerful 1800 watt motor • Gearbox with clutch • 4 speed gearbox 110, 175, 245, 385 RPM • 20000N magnetic adhesion • Adjustable magnet foot 30˚ to left + right • 245mm stroke • 110mm core grill depth ( with AMK 3L ) • 35mm twist drill capacity • 30mm tapping capacity • Safety belt • Only 28kg ALL CONTAINED IN QUALITY TRANSPORT CASE • Coolant unit, toolholder & cutter are optional extras KING OF MAGNETIC DRILLS

SECTION TWELVE – HAND & POWER TOOLS

JUNIOR TAPER

295

296

SECTION TWELVE – HAND & POWER TOOLS

ALFRA – ROTABEST – ACCESSORIES CORE DRILLS

Cutting depths 25, 50 and 110mm suitable for all makes of magnetic based drilling machines.

If the size you require is not listed, please enquire about our specials.

ALFRA – ROTABEST – ACCESSORIES

6 PIECE CUTTER SETS

PN: 19 07 006 050

PN: 19 07 006 025

CORE DRILL SETS 10 PIECE CUTTER SETS

PN: 19 07 005 050

SECTION TWELVE – HAND & POWER TOOLS

CORE DRILL SETS

PN: 19 07 005 025

297

SECTION TWELVE – HAND & POWER TOOLS

ALFRA – ROTABEST – ACCESSORIES OPTIONAL EXTRAS



Drill Chuck



Vacuum Atachment

Pipe Clamp Attachment

Magnetic Swarf Remover

Safety Strap

BIO 2000

RIXOL 2000

Tapping Chuck



Weldon Arbor

Rota Quick Arbor

Arbor for AL Cutters

Coolant Unit COOLANTS AND LUBRICANTS

Wax Lubricant Stick

298

TOOL HOLDERS

fein – magnetic based core drills

Magnetic Core Drill Unit up to 32 mm Order no.: 7 270 27 PN: KBM 32 Q Package includes: 1 storage box, 1 cooling lubricant pump, 1 lashing strap, 1 swarf hook, 1 key-type drill chuck, 1 QuickIN adaptor for M18 x 6 P 1.5, 2 centering pins. Technical Data Input Output Speed, Full Load Cable with Plug Weight Core Drill Twist Drill (with drill chuck) Threaded Drill Drilling Depth Max. Chuck Magnetic Holding Power Height (drill jigs) Stroke Total Stroke Range Magnetic Foot Dimensions

700 W 450 W 440 R.P.M 4m 10 kg 12-32 mm 13 mm M 12 50 mm QuickIN 9000 N 373 mm 135 mm 260 mm 160 x 80 mm

Kbm50qx Magnetic Core Drill Unit up to 50 mm Order No.: 7 270 33 PN: KBM 50 QX Package includes 1 storage box, 1 cooling lubricant pump, 1 lashing strap, 1 swarf hook, 1 3-jaw chuck up to 13mmØ, 1 QuickIN adaptor for M18 x 6 P 1.5, 2 centering pins. Technical Data Input Output Speed, Full Load Cable with Plug Weight Core Drill Twist Drill (with drill chuck) Threaded Drill Drilling Depth Max. Chuck Magnetic Holding Power Height (drill jigs) Stroke Total Stroke Range Magnetic Foot Dimensions

SECTION TWELVE – HAND & POWER TOOLS

KBM 32 Q

1200 W 680 W 260/520 R.P.M 4m 12 kg 12-50 mm 20 (16) mm mm M 16 50 mm Quick IN 11000 N 368 mm 135 mm 310 mm 180 x 90 mm

299

SECTION TWELVE – HAND & POWER TOOLS

fein – magnetic based core drills KBM 52 U Magnetic Core Drill Unit up to 50 mm Order no.: 7 270 31 PN: KBM 52 U Package includes: 1 storage box, 1 coolant tank, 1 lashing strap, 1 swarf hook, 1 QuickIN adaptor for M18 x 6 P 1.5, 2 centering pins, 1 drift key, 1 FEIN Highperformance cutting oil spray. Technical Data Input Output Speed, Full Load Cable with Plug Weight Core Drill Twist Drill (with drill chuck) Threaded Drill Drilling Depth Max. Chuck Magnetic Holding Power Height (drill jigs) Stroke Total Stroke Range Magnetic Foot Dimensions

KBM 65 Q Magnetic Core Drill Unit up to 65 mm Order no.: 7 270 29 PN: KBM 65 Q Package includes: 1 storage box, 1 cooling lubricant pump, 1 lashing strap, 1 swarf hook, 1 drift key, 1 3- jaw chuck up to Ø 13 mm, 1 QuickIN adaptor for M18 x 6 P 1.5, 2 centering pins, 1 swarf guard. Technical Data Input Output In-load Speeds 1st Speed / 2nd Speed Switch Step SLOW Switch Step FAST Cable with Plug Weight Core Drill Twist Drill Max. Ø Threaded Drill Reamer Ø Drilling Depth Max. Chuck Magnetic Holding Power Height (drill jigs) Stroke Total Stroke Range Magnetic Foot Dimensions

300

1200 W 640 W 130-260/260-520 R.P.M 4m 13,7 kg 12-50 mm 23 (16) mm M 16 50 mm QuickIN/MK 3 11000 N 368 mm 135 mm 310 mm 180 x 90 mm

1460 W 650 W 125/255 R.P.M 250/510 R.P.M 4m 19,8 kg 12-65 mm 23 mm M 20 23 mm 50 mm QuickIN/MK 3 12000 N 536 mm 145 mm 330 mm 184 x 92 mm

fein – Portable pipe polisher – RS12-70e

SECTION TWELVE – HAND & POWER TOOLS 301

302

SECTION TWELVE – HAND & POWER TOOLS

GRIT LINISHERS and DEBURRERS FEIN RS 12-70E PIPE SANDER PN: RS12-70E • Pipe sander for sanding and polishing stainless steel pipes • Most powerful pipe sander commercially available • High power motor for unmatched performance and durability • Extremely high abrasion performance • Cutting speed up to 22m/s • Sanding and polishing as quick as possible • Usage ranges from rough sanding to mirror polish • Sanding of pipe arcs in just two passes • Tracking stability by precise belt guides • Tool free belt change • Self start lock prevents uncontrolled reactivation following power supply interruption Input 1200W Output 750W Speed, No load 2700-7000RPM Cutting speed 22 m/sec Minimum wall clearance 50mm Weight 3.8kg Cable length 4m Pipes up to Ø 8 – 80mm GRIT GX BELT GRINDERS- 75mm BELT Ideal for railing, frame and pipe construction work including shop fitting • Safety switch with motor protection and low voltage release • Contact and surface grinding • Very quiet operation • Adjustable working height • Contact wheel polyurethane lined • Surface grinding platen (height adjust.) • GX is prepared for dust extraction (connection socket dia. 90mm) • 2 colour powder coated • GX suits all commercially available belt types & non-woven belts • GX c/w power cable, plug and quality 36 grit belt SPECIFICATIONS PN: GX75

PN: GX752H

3kW Motor 3 x 400V, 50Hz Belt Grinder 75mm x 2000mm 2880 RPM 30 m/sec 75 x 430mm Graphite Pad Weight 65kg

1.5 / 2.0kW Motor 3 x 400V, 2 Speed, 50Hz Belt Grinder 75mm x 2000mm 1440 / 2880 RPM 15 / 30 m/sec 150 x 430mm Graphite Pad Weight 82kg

GRIT LINISHERS and DEBURRERS

PN:

Ø mm

PN:

Ømm

6 99 02 020 00 0 6 99 02 021 00 0 6 99 02 022 00 0 6 99 02 023 00 0 6 99 02 024 00 0 6 99 02 025 00 0 6 99 02 026 00 0 6 99 02 027 00 0 6 99 02 028 00 0 6 99 02 029 00 0 6 99 02 030 00 0 6 99 02 031 00 0 6 99 02 032 00 0 6 99 02 033 00 0 6 99 02 034 00 0 6 99 02 035 00 0 6 99 02 036 00 0 6 99 02 037 00 0 6 99 02 038 00 0 6 99 02 039 00 0 6 99 02 040 00 0 6 99 02 041 00 0 6 99 02 042 00 0 6 99 02 043 00 0 6 99 02 044 00 0 6 99 02 045 00 0 6 99 02 046 00 0 6 99 02 047 00 0 6 99 02 048 00 0 6 99 02 049 00 0 6 99 02 050 00 0 6 99 02 051 00 0 6 99 02 052 00 0 6 99 02 053 00 0 6 99 02 054 00 0 6 99 02 055 00 0 6 99 02 056 00 0 6 99 02 057 00 0 6 99 02 058 00 0 6 99 02 059 00 0 6 99 02 060 00 0 6 99 02 061 00 0 6 99 02 062 00 0

16.0 17.0 17.2 18.0 19.0 20.0 21.0 21.3 22.0 22.2 22.5 23.0 23.1 24.0 24.5 25.0 25.4 25.9 26.0 26.4 26.9 27.0 28.0 28.6 28.8 29.0 30.0 31.7 32.0 33.0 33.7 34.0 35.0 36.0 37.5 38.0 38.1 38.3 40.0 41.0 41.2 42.0 42.4

6 99 02 063 00 0 6 99 02 064 00 0 6 99 02 065 00 0 6 99 02 066 00 0 6 99 02 067 00 0 6 99 02 068 00 0 6 99 02 069 00 0 6 99 02 070 00 0 6 99 02 071 00 0 6 99 02 072 00 0 6 99 02 073 00 0 6 99 02 074 00 0 6 99 02 075 00 0 6 99 02 076 00 0 6 99 02 077 00 0 6 99 02 078 00 0 6 99 02 079 00 0 6 99 02 080 00 0 6 99 02 081 00 0 6 99 02 082 00 0 6 99 02 083 00 0 6 99 02 084 00 0 6 99 02 085 00 0 6 99 02 086 00 0 6 99 02 087 00 0 6 99 02 088 00 0 6 99 02 089 00 0 6 99 02 090 00 0 6 99 02 091 00 0 6 99 02 092 00 0 6 99 02 093 00 0 6 99 02 094 00 0 6 99 02 095 00 0 6 99 02 096 00 0 6 99 02 097 00 0 6 99 02 098 00 0 6 99 02 099 00 0

42.6 43.0 43.3 44.0 44.5 45.0 46.0 48.0 48.3 49.0 50.0 50.8 51.0 53.0 53.7 54.0 55.0 57.0 58.0 59.0 60.0 60.3 63.0 63.5 65.0 67.0 69.0 70.0 73.0 75.0 76.0 76.1 76.2 80.0 82.5 88.9 90.0

SECTION TWELVE – HAND & POWER TOOLS

Contact Rollers Simple assembly, ball bearing mounted at both ends

303

SECTION TWELVE – HAND & POWER TOOLS

GRIT LINISHERS and DEBURRERS GX SERIES ADDITIONS: CENTRELESS GRINDING UNIT PN: GXC Unit for grinding and polishing of surfaces of straight round pipes and shafts with diameter of 5 – 100mm in all lengths of metal, steel and stainless steel. • Wet or dry grinding (for wet grinding, cooling unit GXW must be installed) • All types of abrasive belts 75 x 2000mm can be used, including non-woven nylon abrasive belts • Fast and efficient grinding – pipes of 1m in length can be ground in approx. 30 seconds • Longer pipes require roller support for optimal guidance • Complete set of guide rails (brass, nylon or wood) is included with the equipment • Comes with power cable and plug COOLING UNIT PN: GXW Cooling unit for use with GXC Centreless Ginding Unit. • Adjustable water jet • Weight 8kg (without coolant) • Pump motor: 160 watt – 3 x 220/400V • Unit supplied complete with on-off switch, power cable and plug PIPE NOTCHING GRINDING UNIT PN: GXR Notch grinding unit for pipes and profiles of 16mm – 75mm Ø. Revolutionary speed of 1500 RPM is ideal for VA-pipes, ie less heat, paint and burr on finished article increases service life of belt considerably. • Grinds all angles between 30 and 90˚ • Quick clamping for round and square tubes and flat material • With integrated adjustable depth stop • Cross slide is standard equipment • GX comes complete with one abrasive belt 75 x 2250mm grit 36 and with one contact roller 42.4mm Ø • Contact rollers available in all sizes • Special stainless steel jaws and jaws for particular profiles also available DEBURRING MACHINE PN: GXE GXE Deburring machine for deburring of pipes and profiles of steel and other materials. • Component support and motor station adjustable • Motor 2.2kW , 1500 RPM • Weight 32kg (without stand) • Brush 250 x 60mm of quality wire 0.35mm installed - part of standard equipment • Special brushes of steel, stainless steel and polishing wheels can be fitted • The GXE comes complete with safety switch with motor protection, low voltage release and plug STAND

304

PN: GXS • Weight 21kg • Robust and space efficient stand for GXE deburring machine

GRIT LINISHERS and DEBURRERS

For the industrial processing of steel, stainless steel and non-ferrous metals PN: GI150 GI1502H Power 4,000 watt 2,600 – 3,100 watt Speed 1,500 RPM 1,500 / 3,000 RPM Belt Size 150 x 2,000mm 150 x 2,000mm Weight 82kg 82kg C/W plug, 16 Amp, 1 grinding belt 150 x 2,000mm 40 grit GI SERIES ADDITIONS: CENTRELESS GRINDING UNIT PN: GIC Unit for grinding and polishing of surfaces of straight round pipes and shafts with diameter of 5 – 100mm in all lengths of metal, steel and stainless steel. • Wet or dry grinding (for wet grinding, cooling unit GXW must be installed) • All types of abrasive belts 75 x 2000mm can be used, including non-woven nylon abrasive belts • Fast and efficient grinding – pipes of 1m in length can be ground in approx. 30 seconds • Longer pipes require roller support for optimal guidance • Complete set of guide rails (brass, nylon or wood) is included with the equipment • Comes with power cable and plug COOLING UNIT PN: GIW Cooling unit for use with GXC Centreless Ginding Unit. • Adjustable water jet • Weight 8kg (without coolant) • Pump motor: 160 watt – 3 x 220/400V • Unit supplied complete with on-off switch, power cable and plug PIPE NOTCHING GRINDING UNIT PN: GIR Notch grinding unit for pipes and profiles of 16mm – 75mm Ø. Revolutionary speed of 1500 RPM is ideal for VA-pipes, ie less heat, paint and burr on finished article increases service life of belt considerably. • Grinds all angles between 30 and 90˚ • Quick clamping for round and square tubes and flat material • With integrated adjustable depth stop • Cross slide is standard equipment • GX comes complete with one abrasive belt 75 x 2250mm grit 36 and with one contact roller 42.4mm Ø • Contact rollers available in all sizes • Special stainless steel jaws and jaws for particular profiles also available

SECTION TWELVE – HAND & POWER TOOLS

GRIT GI BELT GRINDERS – 150mm BELT

DEBURRING MACHINE PN: GIE GXE Deburring machine for deburring of pipes and profiles of steel and other materials. • Component support and motor station adjustable • Motor 2.2kW , 1500 RPM • Weight 32kg (without stand) • Brush 250 x 60mm of quality wire 0.35mm installed - part of standard equipment • Special brushes of steel, stainless steel and polishing wheels can be fitted • The GXE comes complete with safety switch with motor protection, low voltage release and C/W plug STAND PN: GIB • Weight 21kg • Robust and space efficient stand for GXE deburring machine

305

306

SECTION TWELVE – HAND & POWER TOOLS

GRIT LINISHERS and DEBURRERS Contact Rollers Long service life, low resistance due to high quality ball bearings, easily replaceable PN: 6 99 02 101 00 0 6 99 02 102 00 0 6 99 02 103 00 0 6 99 02 104 00 0 6 99 02 105 00 0 6 99 02 106 00 0 6 99 02 107 00 0 6 99 02 108 00 0 6 99 02 109 00 0 6 99 02 110 00 0 6 99 02 111 00 0 6 99 02 112 00 0 6 99 02 113 00 0 6 99 02 114 00 0 6 99 02 115 00 0 6 99 02 116 00 0 6 99 02 117 00 0 6 99 02 118 00 0

Ø mm 20.0 22.0 25.0 25.4 26.9 28.0 30.0 32.0 33.7 35.0 38.0 38.1 38.3 40.0 42.4 44.5 48.3 50.0

PN:

Ømm

6 99 02 119 00 0 6 99 02 120 00 0 6 99 02 121 00 0 6 99 02 122 00 0 6 99 02 123 00 0 6 99 02 124 00 0 6 99 02 125 00 0 6 99 02 126 00 0 6 99 02 127 00 0 6 99 02 128 00 0 6 99 02 129 00 0 6 99 02 130 00 0 6 99 02 131 00 0 6 99 02 132 00 0 6 99 02 133 00 0 6 99 02 134 00 0 6 99 02 135 00 0

50.8 60.0 60.3 63.5 69.0 76.1 76.2 84.0 88.9 101.6 104.0 108.0 114.3 133.0 139.7 168.3 193.7

GI Grit carriage The GIM grinding module is always employed when the workpiece cannot be transported without major effort. The belt grinder then turns into a mobile grinding unit – and can then be put to work on site, for example, in ship construction. Weld seams on the floor can be polished in passing – without fatigue; without bending over and with a great deal of time saved compared to alternative methods. • Highly effective grinding / polishing of weld seams on the floor • Subsequent grinding of steel casting moulds for prefab concrete • Comfortable work handling, fatigue – free without bending over • Easy handling • Minimum wall clearance • Towing bar position can be adjusted – (infinitely variable) • Adjustable depth stop • Belt size 75 / 150 x 2,000mm • Weight 35kg

Tools & Accessories

FEIN High Power Motor Soft Start Restart Lock Integrated Safety Lock Max. Disc Ø mm Power Consumption W Power Output W Idling Speed RPM Cable with plug M Weight Kg Part Number

WSG 14-125

WSG 14-125S

• • • • 125 1200 750 10000 4 2.0 7 221 41

• • • 125 1200 750 7000 4 2.1 7 221 44

Fein compact angle grinders, provide extraordinary robustness, maximum performance and outstanding ergonomics, manageability and safety. The low maintenance high power motor delivers an impressive high grinding capacity and allows you to work in a way that preserves the discs. The very long service life of the WS 14 range is the result of a number of technical features that distinguish these Fein products. Such features include the dimensionally stable motor and drive head unit and therefore the distortion resistant mounting of the field coil and armature, the self supporting motor design and extra wide commutators for improved temperature distribution and an optimized flow of cool air for a high air throughput. Alongside its absolute reliability, the Fein WS 14 series also has an attractive compact design. The particularly ergonomic shape, resulting from the way in which the motor is perfectly positioned in the housing, enables fatigue free working with little effort FEIN WS 20 – 25 ANGLE GRINDERS Fein High Power Motor Soft Start Restart Lock Rear Handle Rotation (4 Position) Max. Disc Ø mm Power Consumption W Power Output W Idling Speed RPM Cable with plug M Weight Kg Mounting Thread Part Number

WSG 20-180

WSG 25-180

• • • • 180 2000 1250 8500 4 4.5 M14 7 221 07

• • • • 180 2500 1700 8500 4 5.1 M14 7 221 26

SECTION TWELVE – HAND & POWER TOOLS

FEIN WS 14 COMPACT ANGLE GRINDERS

C/w wheel guard, 1 pair of flanges, additional handle, 1 set of keys Fein High Power Motor Soft Start Restart Lock Rear Handle Rotation (4 Position) Max. Disc Ø mm Power Consumption W Power Output W Idling Speed RPM Cable with plug M Weight Kg Mounting Thread Part Number

WSG 20-230

WSG 25-230

• • • • 230 2000 1250 6600 4 4.5 M14 7 221 08

• • • • 230 2500 1700 6600 4 5.1 M14 7 221 27

C/w wheel guard, 1 pair of flanges, additional handle, 1 set of keys

307

308

One Tool … So Many Applications.

SECTION TWELVE – HAND & POWER TOOLS

Tools & Accessories

PN:

DESCRIPTION:

SIZE:

633/27 633/38 633/50 633/75 633/100 BBWH PPB

PAINT BRUSH RED HANDLE 1” PAINT BRUSH RED HANDLE 1 ½” PAINT BRUSH RED HANDLE 2” PAINT BRUSH RED HANDLE 3” PAINT BRUSH RED HANDLE 4” BANNISTER BRUSH – WOODEN HANDLE PICKLING PASTE BRUSH (CHEMICAL RESISTANT)

BOX/12 BOX/12 BOX/12 BOX/12 BOX/12 BOX/12 EACH

FILLET GAUGES PN: FG HARRIS WELCO FILLET GAUGE

TP CASE PN: TP CASE

SECTION TWELVE – HAND & POWER TOOLS

BRUSHES

PN: CIGAGE CIG FILLET GAUGE PN: FG50 METRIC WELD MEASURING GAUGE HACKSAW BLADES HBBM18 HACKSAW BLADE BIMETAL – 18tpi HBBM24 HACKSAW BLADE BIMETAL – 24tpi

Fronius TP1500 heavy duty PVC case with quick release metal latches and dual compartment hinged lid, will fit TP1500 electrode holder, earth clamp and regulator. TP PVC PN: TP PVC

HBBM32 HACKSAW BLADE BIMETAL – 32tpi EG-N260 ETC JUNIOR HACKSAW 150mm

RESTRICTED ACCESS HACKSAW PN: 16004 • Stabilises blade • Cuts all material – metal, wood, glass, copper, tiles, plastic • Uses standard hacksaw blades 10” & 12”

• Flame retardant • Rip resistant • Easy to clean

309

SECTION TWELVE – HAND & POWER TOOLS

Tools & Accessories COMPARTMENT BOXES PN: IH031 COMPARTMENT BOXES CLEAR – 5 SECTIONS

PN: IH093 COMPARTMENT BOXES CLEAR – 14 SECTIONS

CHIPPING HAMMERS PN: 500087 RUBBER HANDLE CHIPPING HAMMER

PN: 500088 SPRING HANDLE CHIPPING HAMMER

EXTRACTION FANS Super speed ventilator PN: 90406 PN: IH094 COMPARTMENT BOXES CLEAR – 18 SECTIONS

KINCROME SPARES BOXES PN: 07031 – SMALL PN: 07033 – MEDIUM PN: 07032 – LARGE

• High pressure and large volume fan • Complete with 5 metres of flexible duct • 550 watt • 12” diameter • 62 cubic metres / minute air flow DUCTING PN: 90408

310

• 5m ducting to suit Super Speed Ventilator

MAGNETIC SQUARES & CLAMPS DESCRIPTION:

MSL STCSWMS STWMS STCMS STBDMS STMA

MAGNETIC SQUARES LGE – RED MAGNETIC WELDERS SQUARES – COMPACT MAGNETIC WELDERS SQUARES – STANDARD MAGNETIC WELDERS SQUARES – CHUNKY MAGNETIC WELDERS SQUARES – BIG DADDY MAGNETIC WELDERS SQUARES – MULTI ANGLE

SECTION TWELVE – HAND & POWER TOOLS

PN:

311

SECTION TWELVE – HAND & POWER TOOLS

MAGNETIC SQUARES & CLAMPS Bessey ‘ORIGINAL’ All Steel Welding Clamps – General Purpose PN: SUPER/G-ZK SERIES SUPER16 160 x 120mm SUPER20 200 x 120mm G20ZK 200 x 100mm G25ZK 250 x 120mm G30ZK 300 x 140mm G40ZK 400 x 120mm G60ZK 600 x 120mm U Jaw Clamp GU25-12-6ZK 250 x 120 x 60 x 60mm PN: GM-ZK SERIES Omega All Steel Clamps • Omega bend – improves flexibility under tension (absorbs shocks) • Specially designed for a ‘greater feel’ of clamping pressures • Utilises maximum capacities of throat depth GM20ZK 200 x 100mm GM30ZK 300 x 140mm GM50ZK 500 x 120mm

Bessey All Steel Welding Clamps – HEAVY DUTY PN: SG-M SERIES SG25M SG30M SG50M U Jaw Clamp SGU30-14-10 130mm

250 x 120mm 300 x 140mm 500 x 120mm 300 x 140 x 100 x

PN: STB-M SERIES STB30M STB40M STB50M STB60M

312

FEATURES • Fully heat treated one piece profile rail for strength, flexibility, safety and long life • Forged sliding arm for extreme loads • Surface coated wear resistant square acme threaded spindle for smooth and more efficient work • Standard pressure pad tilts up to 15° for resilient clamping • Ergonomic smooth tommy bar • U jaw profile designed to reach over obstacles for safer and more efficient clamping. Eliminates ’blocking up’ • Compression at 150mm: SUPER / G-ZK / GM-ZK 5,000N GU-ZK 4,000N

300 x 175mm 400 x 175mm 500 x 175mm 600 x 175mm

FEATURES • Fully heat treated one piece profile rail for strength, flexibility, safety and long life • Forged sliding arm for extreme loads • Surface coated wear resistant square acme threaded spindle for smooth and more efficient work • Heavy duty pressure pad tilts up to 35° for resilient and safer clamping • Ergonomic smooth tommy bar • U jaw profile designed to reach over obstacles for safer and more efficient clamping. Eliminates ’blocking up’ • STB-M has a spindle with a 19mm hexagon bolt end torque wrench or spanner • Compression at 150mm: SG-M / SGU 12,000N STB-M 22,000N

MAGNETIC SQUARES & CLAMPS

PART NUMBER: G-H SERIES G20H 200 x 100mm G25H 250 x 120mm G30H 300 x 140mm G40H 400 x 120mm U Jaw Clamp GU25-12-6H 250 x 120 x 60 x 10mm

FEATURES • Vibration resistant • Fully heat treated one piece profile rail for strength, flexibility, safety and long life • Forged sliding arm with ratchet mechanism for non slip clamping • Lever handle applies pressure smoothly for faster and more efficient clamping. 5 times faster than screw clamps • Pressure plate is torsion resistant • U jaw profile designed to reach over obstacles for safer and more efficient clamping. Eliminates ’blocking up’ • Compression at 150mm: G-H 8,000N GU-H 3,800N

BESSEY C Clamps PN: VC SERIES VC2 VC3 VC4 VC6 VC8 VC10

50 x 50mm 75 x 50mm 100 x 60mm 150 x 75mm 200 x 90mm 250 x 100mm

FEATURES • Fully heat treated one piece profile rail for strength, flexibility, safety and long life • Surface coated wear resistant square acme threaded spindle for smooth and more efficient work • Knurled standard pressure pad for safer clamping • Ergonomic smooth tommy bar • Compression at 150mm: VC 15,000N

SECTION TWELVE – HAND & POWER TOOLS

BESSEY All Steel Lever Action Welding Clamps – General Purpose

BESSEY parrallel jaw grip pliers PN: GRZ10

Grip Plier

PN: GRZ20

Grip Plier

PN: GRZRO

Pipe Clamp

PN: GRZV

Vario Grip Plier

PN: GRZC

C Grips

SPECIFICATIONS GRZ10 100 x 65mm GRZ20 200 x 65mm GRZV 100 x 50-80mm GRZRO 110mm Ø GRZC 110 x 80mm

FEATURES • All steel construction for welding applications • Fixed vertical bar that allows for instant adjustment • Finger safe jaw lock release • Fine tension adjustment • Variable jaw angle adjustment up to 9°

313

SECTION TWELVE – HAND & POWER TOOLS

MAGNETIC SQUARES & CLAMPS Bessey Welder’s angle clamp PART NUMBER: WSM9 PART NUMBER: WSM12

FEATURES • Quickly align materials of the same or varying thickness at 90° • Slotted base for setting up in a jig or on a drill press • Copper coated spindle resists welding splatter adhesion SPECIFICATIONS WSM9 • T joints 90 x 60mm • Mitre joints 90 x 90mm • Pipe Ø 65mm WSM12 • T joints 120 x 100mm • Mitre joints 120 x 120mm • Pipe Ø 115mm STABILA Magnetic Levels

PART NUMBER: 81SM/25+H • Supplied with holster PART NUMBER: 81SREM/25 PART NUMBER: 81SREMW45 • Fitted with powerful rare earth magnets that have 5 times more pull than ferrite magnets FEATURES • Sturdy, shock proof diecast frame • Milled measuring surface for improved accuracy • Permanently fixed vials for lasting accuracy SPECIFICATIONS • Length 250mm • Accuracy normal position: +/0.5mm/m • Accuracy upside down position: +/0.75mm/m

314

POCKET PRO LEVEL

TANJANT STRONGHAND CLAMPS PART NUMBER: VS7401 / 2 / 3

Roof Pitch to Degree Conversion Scale is now on all Pocket Pro Levels PN: PP-200 The Pocket Pro Level is one of the finest levels available in the welding industry today. It is designed to give years of quality service. The levels are machined from the highest quality aluminium, then anodized for lasting beauty and protection. It’s extra strong magnets will hold it firmly to any steel surface. The two stationary vials are placed at 90° angles to each other and can be read from any surface of the level. If these vials are damaged, they can be removed and replaced and silicon sealed with a new one. The dial is in 2.5° increments with spring tension for smooth operation. The Pocket Pro Level is 229mm long and 38mm wide for ease of storage and handling.

Unique New Design For Precise Angle Placement PN: VS7321 ADJUST-O ANGLE MAGNET • 25° - 275° adjustment with clamp handle • Vernier scale offers 1° readings • Hold flat or round work pieces • V-shape on both magnets for round tubes • Bubble vial level on side • 120 x 190 x 40mm • Mag force 40kg Adjust-O Switch magnets are rare earth magnets

VS7402

• Multi-purpose locking pliers with deep throat • Great for sheet-metal and cabinetmaking • Adjustable • Nickel / chrome plated body PN:

SIZE:

VS7401 VS7402 VS7003

17cm 28cm 34cm

PART NUMBER: VS7441 / 2

• • • •

Locking pliers – heavy duty A must for pipe welders / fitters Durable nickel / chrome plated body Angle pads for varying pipe sizes

PN:

SIZE:

VS7441 VS7442

25-50mm 40-75mm

VS7601, 2, 3, 4, 5

VS7601

• Super heavy duty extra large, extra strong, sliding arm clamps • Available in 32cm, 42cm, 52cm, 62cm and 80cm jaw openings • Removable, reversible arm for spreading • Durable, rigid 42mm x 20mm cross section • oversize heavy duty swivel pad • hex head to tighten with spanner

MAGNETIC SQUARES & CLAMPS

VS7101 / 2 / 3 / 4 / 5 / 6

VS7252

VS7221, 2

• 30/60˚ edge, with the standard 45˚ and right angles • Large centre holes for easier handling • Two riveted holes for linking magnets together • Useful in light duty applications • Convenient storage box VS7201

• Exclusive magnet with ON/OFF switch • Attach to flat and round surfaces • Switch makes it easy to position and easy to clean • 3 Bubble vials VS7241

• Easy safe setup: switch off, setup, switch on • Simple to clean, switch off then wipe away • Ideal for round and square tubing, angle & flat bar • Hold workpieces at 45˚ and 90˚ VS7421

VS7421

VS7422

VS7103

• Available in 15cm,18cm,23cm,28cm jaw openings • V pad for pipes and extender block included • Extender block allows for access in step-over applications • Removable, reversible arm for spreading • Threaded hole on base for mounting both attachments, in either clamping direction • Opening is with no attachments connected PN:

SIZE:

VS7101 VS7102 VS7103 VS7104 VS7105 VS7106

150 x 90mm 180 x 120mm 230 x 120mm 280 x 140mm 320 x 140mm 520 x 140mm

SECTION TWELVE – HAND & POWER TOOLS

VS7101, 2, 3, 4, 5, 6

• 30/60˚ edge, with the standard 45˚ and right angles • Large centre hole for easier handling • Two riveted holes for linking magnets together VS7431

• Forged, rugged round tip pliers • Easy to use • Deeper than normal throat for versatility • Made of high strength treated steel • Nickel/chrome plated body • (VS7422 with pads) CLIP ON V-PADS

• A generous 510mm maximum reach when fully extended • Extra large pads, one tilting, one adjustable • Made of high strength treated steel • Nickel/chrome plated body

Customize your Strong Hand Clamp for Pipe Work PN: VS7922 Suits VS7102 & VS7103 PN: VS7924 Suits VS7104 • Robust design and construction • Easy to fit and use • Excellent value • Unique feature round to round clamping

315

SECTION TWELVE – HAND & POWER TOOLS

TAPE MEASURES PN:

DESCRIPTION:

PN:

DESCRIPTION:

TBC5019 TBC8025

STERLING – 5m x 19mm STERLING – 8m x 25mm ‘PRO’ STERLING – 8m x 25mm METRIC & IMPERIAL

PR8032

STERLING – 8m x 32mm ‘POWERMAX’ MAGNETIC TIP

TBC8025I

• Heavy duty tape measure with rubber grip case • Magnetic end hook • 6 rivet hook for extra strength DESCRIPTION:

TC1025

STERLING – 10m x 25mm DUAL PLUS DOUBLE STOP

• 4 Rivet end hook for extra strength on 8m tapes • Double nylon coated matte finish blade for abrasion resistance • Rubber sides and grip PN:

DESCRIPTION:

TBCM8025

STERLING – 8m x 25mm MAGNETIC TIP STERLING – 10m x 25mm ‘PRO’ MAGNETIC TIP

TBCM1025

• Magnetic end hook with 4 rivets • Double nylon coated matte finish blade for abrasion resistance • Rubber sides and grip

316

PN:

• Professional tape measure • Heavy duty double stop – stopper under tape • Double nylon coated matte finish blade for abrasion resistance • Strong 4 rivet gripper end hook for extra strength

KNIVES AND THERMOMETERS

PN:

DESCRIPTION:

112-1 921-2D 921-4D

STERLING KNIFE BLADE DISPENSER PACK OF 100 BLADE DISPENSER PACK OF 10

THERMOMETER QM7223 DIGITECH NONCONTACT THERMOMETER • Laser pointing targeting • Wide temperature range • Backlit LCD • Holster included • Response time <150ms • Temperature range: -50˚ to + 550˚C • Optical resolution 8:1 • Accuracy: +/- 2 % • Laser output: < 1mW • Dimensions: 160(l) x 82(w) x 41.5(h)mm

SECTION TWELVE – HAND & POWER TOOLS

STERLING KNIVES • 5 blade magazine automatically re-loads new blades • Front loading with safety button allows used blades to be removed or turned around without opening knife body • Heavy duty all metal construction with smooth reliable mechanism • Unique shape for superior grip & control

UNIVERSAL MAGNETIC TAPE HOLDER PN: 89754 The Universal Magnetic Tape Holder has no removable parts and works with most industrial measuring tapes. It is a great little magnetic pocket level and your third hand when doing those difficult measuring jobs while working alone. The Universal Magnetic Tape Holder will secure the end of your tape while laying out close tolerance measurements from the end or the centre of your material. This tool is machined from aluminium and anodized for a protective finish. A strong 11kg (25lb) pull magnet set in epoxy secures the tape holder to your work. At one end of the tool is a small rare earth magnet to hold your measuring tape in place while laying out difficult jobs. This inexpensive tool is a must for all metal mechanics, and is only 100mm long and 16mm square.

317

SECTION TWELVE – HAND & POWER TOOLS

Pipe equipment TWO HOLE PINS PN: 42050 This model features slotted pins with “friction fitting” knurled nuts. One pin has a vial for easier vertical leveling. PN: 42050-T This model has pins which are threaded. One pin has a vial for easier vertical leveling. PN: 42050-TL This is our largest set for holes up to 1 15/16” (49.2mm) in diameter. One pin has a vial for easier vertical leveling. All models now come with 360° vials that just “snap” in and out for easy replacement.

MULTI-USE ANGLE BURNING GUIDE Roof Pitch to Degree Conversion Scale is now on all Multi-Use Angle Burning Guides. PN: 70001 With magnetic base is a must for every person who uses a conventional or plasma torch and wants an excellent angle or straight cut every time. It can also be used as a protractor, or as a multi-angle tri-square. The Angle Burning Guide will hold any standard square as well as most straight edges. Special squaring and marking jobs are a snap with your new multi-use tool. Roof Pitch Level Degrees 1/12 4 ½° 2/12 9 ½° 3/12 14° 4/12 18 ½° 5/12 22 ½° 6/12 26 ½° 7/12 30° 8/12 33 ½° 9/12 37° 10/12 40° 11/12 42 ½° 12/12 45° PIPE FLANGE ALIGNERS

318

PN: 38240 This model features slotted pins with “friction fitting” knurled nuts for flanges to 30” – 150lbs (76cm – 66kg). Fits flanges with holes ½” – 1 7/16” (12.7mm – 36.5mm) diameter. PN: 38240-T This model has pins which are threaded for flanges to 30” – 150lbs (76cm – 66kg). Fits flanges with holes ½” – 1 7/16” (12.7mm – 36.5mm) diameter. PN:38240-TL This is our largest model. Fits flanges with holes ½” – 1 15/16” ( 12.7mm – 49.2mm) in diameter. All models of the Pipe Aligner will two hole (make two holes of the flange, horizontally level with the ground) and vertically level the face of the flange in ONE easy step. Threaded models have fast double lead threads. All models now come with 360° vials that just “snap” in and out for easy replacement. The Pipe Flange Aligner saves valuable fit-up time, in most cases it cuts fit-up time in half and eliminates the frustration of balancing a level on the pins.

PIPE EQUIPMENT

PN: 781130 Ultra Clamp 25 – 65mm (1 – 2 ½”) 1.5kg PN: 781150 Ultra Clamp 50 - 150mm (2 – 6”) 4.0kg PN: 781170 Ultra Clamp 127 – 300mm (5 – 12”) 6.7kg A fast, accurate fit-up clamp for pipe to pipe, pipe to fitting … and more! • All new rugged frame, built for job site use • Smooth new roller clamping action for positive gripping • Stainless steel contacts & alignment screws • Operating handle repositions for close work • Fine adjustment screws for quick fit-up • Light weight for overhead work

SECTION TWELVE – HAND & POWER TOOLS

ULTRA CLAMP

WIZARD WRAP – WRAP AROUND PN: WW-16 Small 1” x 6” pipe (30” long x 2 5/8” wide) PN: WW-17 Medium 2” x 16” pipe (60” long x 3 7/8” wide) PN: WW-17A Large 6” x 30” pipe (120” long x 5 ¼” wide) PN: WW-19 Ex-Large 12” x 48” pipe (180” long x 7” wide) Wizard Wrap is made from a non-asbestos, heat resistant material. The edges are thick and straight for easier more accurate marking. Exclusive features: • 48” tape measure printed on the Extra Large Wrap • 36” tape measure printed on the medium and large Wizard Wraps. 28” measure on the small. Saves the use of an extra tape measure, and makes mark-up easier • “Circumference & Quartering” scale printed on all sizes. Limiting the need for calculations because the exact circumference, ¼, ½, and ¾ of the circumference, plus the actual pipe diameter for 2” to 30” pipe is printed on the outside • Packaged in a durable, reusable container • A high density product for heavy duty service at temperatures up to 180°C and has outstanding resistance to oil, petrol, kerosene, water and sea water. • Special order lengths and widths available

319

SECTION TWELVE – HAND & POWER TOOLS

AIR tools and cylinder brackets AIR TOOLS PN: DESCRIPTION: 38009 AIR NEEDLE SCALER • Straight barrel • 19 pin • 4400 bpm PN: DESCRIPTION: 07001 AIR DIE GRINDER • Includes ¼” and 6mm collets • 22,000RPM • Twin-bearing design • Distinguished spindle concentricity less than 0.05mm • Vibration free • Air consumption approx. 3.5cfm • Rec. air pressure 90PSI Foundry Tongs Heavy duty foundry tongs made from carbon steel round bar. Part No. Length T1

400mm x 10mm

T2

510mm x 12mm

T3

530mm x 14mm

T4

570mm x 14mm

T5-12

1080mm x 12mm

T5

1080mm x 16mm

Chalk line PN: 20/64110 • Durable zinc alloy case • Easy slide fill operation • Self locking winder handle • 30m (100’) See page 257 in Chemical Section for straight line chalk HARRIS CYLINDER BRACKET

320

PN: 4302650 Harris Cylinder Bracket – Single PN: 4302656 Harris Cylinder Bracket – Double • The secure way to store or transport gas cylinders with ease • Holds D, E and G size bottles • Steel bracket with protective vinyl edge and baked enamel finish • Anti static strap with steel cinch buckle • Easily mounted to a vertical surface • Drain holes

Tracks and guides

PN: TJ5085 Trakka LineCutter for the workshop professional. Cuts accurate and precise straight lines and bevel edges with ease and control. • Suits all type 41/44 gas torches • With Trakka Holder and Plasma Adaptor Bush accessories, will suit all plasma torches • Optimum tip height at all times • Magnetic clamping system, bases slide and twist lock to suit plate width • Bevel edges cut easily • 1.35m Aluminium guide rail (cuts 1.2m) • Suction clamping (for non-magnetic materials) with suction plate accessory • Guide rail joiner and Trakka Guide Rail accessories available • CNC machined quality parts, brass forgings, stainless rails and axles • Spare parts available Trakka Holder PN: TJ5090 – TJ5101 Used with Trakka Line Cutter • Adapts plasma torches to Trakka Line Cutter • Holders to suit all plasma torches Trakka Rail Guide PN: TJ5181 Trakka 1.2m Aluminium Guide Rail, used with Trakka Line Cutter • Rail Joiner required Magnet Base PN: TJ5250 Used with Trakka Line Cutter • Magnet provides additional support for Trakka Rail • Slide on to rail, rotate top to clamp/unclamp in position • Use with Suction Plate for non-ferrous metals

SECTION TWELVE – HAND & POWER TOOLS

Trakka Line Cutter

Rail Joiner PN: TJ5260 Used with Trakka Line Cutter • Joins Trakka Rail Guides together Suction Plate PN: TJ5280 Used with Trakka Line Cutter when plasma cutting only • Use with Trakka Magnet Base • Allows Trakka Line Cutter to be attached and used to cut non-ferrous metals • Clockwise rotation to apply suction • Click to lock suction mechanism

321

322 SECTION TWELVE – HAND & POWER TOOLS