10539 12 Volt Trigger Manual

10539 12V Trigger Box Electric-Screen Controller •

Rugged Case: size—143mmx80mmx30mm : colour— white Indicative LED’s: Green: illuminates during Electric-Screen DOWN time. Red: illuminates during Electric-Screen UP time.

Common Neutral connection (Earth-in & Electric-screen Earth)

AC-DC 5V Power-pack

Red

(+5VDC)

Switched 240Vac Electric-Screen DOWN (Black / Projector Relay/Trigger output

Black

(0 V)

+12V

DC

240Vac Live-in (Cable to mains) Switched 240Vac Electric-Screen UP

0V

Opmerkingen: 1. Trigger level can be from 4VDC(min) to 20V DC(max). 12VDC is the output voltage level for most projectors. 2. The Electric-Screen Controller can also operate 120VAC Electric-Screen if 120VAC is used instead of 240VAC. 3. The rated Electric-Screen switching current is 3A/250VAC 4. The AC-DC 5V power-pack is supplied. 5. The trigger requires two power supplies, one using the AC-DC 5 power-pack and one using a normal power cable to mains .

Common Neutral Connection (from the screen to the trigger and from the trigger to mains)

Tel: +32 11 40 30 90 E-mail; [email protected] Take a look at www.beamax.com for the latest informtation regarding Beamax projection screens.