10. Analyze Formability - One Step.pptx

  • Uploaded by: Anil Vaswani
  • 0
  • 0
  • December 2019
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View 10. Analyze Formability - One Step.pptx as PDF for free.

More details

  • Words: 372
  • Pages: 8
SHEET METAL ANALYZE FORMABILITY – ONE STEP

Content :

SHEET METAL WORKFLOW ESTABLISH BASIC PARTCHARACTERISTICS DEFINE THE BASIC SHAPE OF THE PART CONSTRUCTING BASE FEATURES

SHEET METAL CORNERS SHEET METAL CUTOUTS SHEET METAL DEFORM FEATURES FLAT SOLID AND FLAT PATTERN ADVANCED SHEET METAL COMMANDS ANALYZE FORMABILITY – ONE STEP AEROSPACE SHEET METAL WORKING WITH NON-SHEETMETAL DATA

ANALYZE FORMABILITY – ONE STEP Purpose

Use the Analyze Formability – One-step command to flatten all or some faces of a sheet metal part.

Objectives

Upon completion of this lesson, you will be able to: •

Perform complete or intermediate unforming, or flatten a sheet metal part.



Output the flattened profile or springback faceted bodies for both intermediate unforming or complete part unforming.



Define different constraint types to control unforming.

ANALYZE FORMABILITY – ONE STEP Use the Analyze Formability – One-step command to flatten all or some faces of a sheet metal part using FEM analysis and calculate the thinning, stress, strain, and springback to predict the risk of forming. You can: •

Perform complete or intermediate unforming, or flatten a sheet metal part.



Output the flattened profile or springback faceted bodies for both intermediate unforming or complete part unforming. You can also specify the target region and the unform region from a different sheet body.



Define different constraint types, both geometry and process, to control unforming.

ANALYZE FORMABILITY – ONE STEP The flattened profiles are produced as spline curves and the analysis results are post-processed and displayed in a color-coded plot mode. The analysis report is generated based on the subsequent results.

Thickness results

Stress results

Strain results

Flattened shape

ANALYZE FORMABILITY – ONE STEP The Onestep Unform feature which saves your inputs and settings, is listed in the Part Navigator, and can be edited if required. The data is retrieved when you reopen the part file and run the Analyze Formability – One-step command.

Summary: ANALYZE FORMABILITY – ONE STEP Use Analyze Formability – One step command to flatten all or some faces of a sheet metal part using FEM analysis. Use it to calculate the thinning, stress, strain, and springback.

In this lesson you: Identified the key preferences and environment settings. Analyzed and flattened a complex sheet metal part.

Related Documents

Analyze
November 2019 10
Analyze This
November 2019 24
Accounting Analyze
May 2020 9
Intervensi Analyze
August 2019 16
One Autism 10
November 2019 5

More Documents from ""