PDVSA ENGINEERING DESIGN MANUAL VOLUME 18–STD ENGINEERING SPECIFICATION
PDVSA N°
TITLE
ACID PROOF BRICK LINED TRENCH DETAILS
0602.1.045
1
JUN.90
GENERAL REVISION
2
L.T.
R.P.
R.R.
0
DEC.85
FOR APPROVAL
2
J.S.
J.G.
E.S.
APPD.
APPD.
REV.
DATE
APPD.BY José Gilarranz
E1994
DESCRIPTION DATE
PAG. REV.
DEC.85 APPD.BY Eduardo Santamaria
DATE
DEC.85
ESPECIALISTAS
ENGINEERING SPECIFICATION
PDVSA
PDVSA 0602.1.045
ACID PROOF BRICK LINED TRENCH DETAILS
REVISION
FECHA
1
JUN.90
Página 1 .Menú Principal
Indice manual
Indice volumen
Indice norma
ACID PROOF (AP) BRICK LINED TRENCHES GRATING COVERS
COVER
1 BRICK + 1 JT
FULL BRICK COURSE
AP BRICK
INVT OF TRENCH SEE PLAN FOR EL
ACID PROOF MORTAR FILL
LONGITUDINAL SECTION
SEE PLAN
CHEMICAL RESISTANT MEMBRANE
SEE PLAN
WIDTH OF TRNCH
AP FLOOR SEE PLAN
DEPTH OF TRENCH
SEE PLAN
DEPTH OF TRENCH
ACID PROOF GRATING
WIDTH OF TRNCH SEE PLAN
SECTION A–A
SECTION A–A
AP BRICK CURB & CONC FLOOR
AP BRICK CRB & AP FLOOR
CHEMICAL RESISTANT MEMBRANE
NOTES:
1. PROTECTION OF CONCRETE, TYPE OF BRICK, MORTAR, GRATING AND MEMBRANE, SHALL BE SPECIFIED IN PURCHASE ORDER DOCUMENT AND/OR SUPPLEMENTED BY A SPECIFICATION IF REQUIRED. 2. FOR TRENCH LAYOUT, DIMENSIONS AND REINFORCING, SEE DESIGN DRAWINGS. 3. FOR MATERIAL SELECTION, REFER TO MANUFACTURER. 4. ALL DIMENSION ARE IN mm UNLESS OTHERWISE NOTED.
ENGINEERING SPECIFICATION
PDVSA
PDVSA 0602.1.045
ACID PROOF BRICK LINED TRENCH DETAILS
REVISION
FECHA
1
JUN.90
Página 2 .Menú Principal
Indice manual
Indice volumen
Indice norma
ACID PROOF (AP) BRICK LINED TRENCHES CHECKERED PLATE OR PRECAST CONCRETE COVER
CURB ANGLE
AP BRICK
INVT OF TRENCH SEE PLAN FOR EL
1 BRICK + 1 JT
FULL BRICK COURSES
ACID PROOF MORTAR FILL
LONGITUDINAL SECTION
CHKD PLATE W/HOLES 300 OC EACH WAY IF REQ D FOR FLOOR DRAINAGE
SEE PLAN
SECTION A–A CHECKERED PLATE COVER
CHEMICAL RESISTANT MEMBRANE
SEE PLANT
WIDTH OF TRENCH
SEE DET 1 STD 2.041
DEPTH OF TRENCH
SEE PLANT
DEPTH OF TRENCH
SEE DET 1 STD 2.041
WIDTH OF TRENCH SEE PLAN
CHEMICAL RESISTANT MEMBRANE
SECTION A–A PRECAST CONCRETE COVER
NOTES:
1. PROTECTION OF CONCRETE, TYPE OF BRICK, MORTAR, GRATING AND MEMBRANE, SHALL BE SPECIFIED IN PURCHASE ORDER DOCUMENT AND/OR SUPPLEMENTED BY A SPECIFICATION IF REQUIRED. 2. FOR TRENCH LAYOUT, DIMENSIONS AND REINFORCING, SEE DESIGN DRAWINGS. 3. FOR MATERIAL SELECTION, REFER TO MANUFACTURER. 4. ALL DIMENSION ARE IN mm UNLESS OTHERWISE NOTED.