03rmamposteria (2)

DOMA STYLE

6915

GROUP

SEASON SUMMER 19

WOMAN

PAGE

REVISED DATE 02/3/2018

1 OF 15

ALEX

SUPPLIER STATUS

DEVELOPE SAMPLE GABY

CONTACT END OF PRODUCTION SAILING DATE

S

SAMPLE SIZE BASE PATTERN

#6874 RAPSODIA WITH EXTRA MEASURES IN PAGE 3 FABRIC COMMENTS

LEATHER COMMENTS MAIN FABRIC

HOOD COLOR HOOD LINING COLOR

GOAT SUEDE TIZA

COLOR QUALITY

BASE PATTERN:

THREAD: LINING COMMENTS

BODY: JUST FRONT &POCKETS COLOR

COLOR:

HALF MOON:

VISCOSE 100% TIZA

COLOR

SAME AS BODY FABRIC SAME AS BODY FABRIC

TRIMS FRONT ZIPPER CHAIN 7 NICKEL TIZA

FINISHING ZIPPER TAPE PADDING FOR POCKETS PIPPING

LOOP IN HALF MOON FINISHING SIZE

NICKEL 11MM

Ultra ligth weight

EYELET FOR ZIPPER PULLER STRIPES: CONTINUED SIZE 10mm FINISHING: NIQUEL GOOD QUALITY, WELL TICKNESS

Image of reference for shape & color: STONES FOR FLOWER IN BACK SIZE 8 mm Color: DULL PASTEL GOOD QUALITY SUPPORT

Image of reference for shape & color: STONES FOR FLOWER IN BACK SIZE 6/3 mm Color: DULL PASTEL GOOD QUALITY SUPPORT

Reference in page 11: Reference for shape NOT COLOR (COLOR MUST BE DULL PASTEL)

Reference in page 11: Image of reference for shape & color: STONES FOR FLOWER IN BACK SIZE 8 mm Color: DULL PASTEL GOOD QUALITY SUPPORT

Reference in page 11:

STONES FOR FLOWER IN BACK SIZE 7 mm Color: DULL PASTEL GOOD QUALITY SUPPORT

Reference in page 11: Image of reference for shape: BEADS FOR BACK OUTSIDE THE FLOWER ROUNDED SIZE 4/3/2 mm Color: DULL PASTEL

Reference in page 11:

PAGE 2 OF 15

COMMENTS

1. Develop one sample in size S. 2. SEND US PICTURES OF THE JACKET FOR APPROVAL BEFORE SENDING IT TO ARGENTINA. 3. The sleeves must be made in GOAT SUEDE WITH MACRAME technique.The size of the stripes must be 2,5 MM or thinner if its possible. We would like you to use the thinnest stripes that can be used without breaking when knitted. PLEASE SEND US PICTURES OF THE SIZES FOR APPROVAL. 4. The body must be made in goat suede. 5.Lining: Only line the front of the body, not the back because the bak has laser cut. Look in page 10 for explanation. 6. The cuffs and bottom rib must be made in the main goat suede, look at page 6 for explanation.

FRONT

Goat suede RIB collar

Macrame

Goat suede RIB bottom

PAGE 3 OF 15

COMMENTS

7.SLEEVE MEASURES 46cm (Sleeve length)

20cm (Muscle) 19cm (Elbow) 18cm (Cuff )

5cm (Cuff fringes)

8.BODY/COLLAR MEASURES 4cm (Rib length)

47cm (Armhole to armhole width)

53cm (Total length)

8cm (Rib length)

COMMENTS

PAGE 4 OF 15

9.ARMHOLE SHAPE Try to make the armholes a little wider than usual slightly accompanying the sleeve width.

COMMENTS

PAGE 5 OF 15

10.SHOULDER SHAPE

Try to make the SHOULDERS slightly loose as in the sketch.

11. The edges of the access must by slightly round as the sketch below.

PAGE 6 OF 15

COMMENTS

12. GOAT SUEDE RIB 12. Develop a rib texture for collar, cuffs and bottom as the images of reference but made in GOAT SUEDE as body.

PAGE 7 OF 15

COMMENTS

13. BACK INNER PIPPING IMPORTANT As the back will not be lined you must make a neat leather piping inside the jacket on the joints of the ribb and the back. We want it to look neat.

Not in front, only inside back.

inside back

PAGE 8 OF 15

COMMENTS

14. POCKET LOCATION/ MEASURES

14cm

3cm

Remember to put ultra ligth weight padding on pippings 2cm Total width

PAGE 9 OF 15

COMMENTS

15. STITCHING Top stitch

OPEN SEAM

Edge stitch

Top stitch OPEN SEAM OPEN SEAM

Top stitch

PAGE 10 OF 15

COMMENTS

16. BACK MACRAME The flower is not aplyed on the back, you have to make it, soak through the jacket and sew it with leather stripes to it. Image below is eference only for general idea: Try to make the flower shape as the sketch. Show us pictures of the working process while you are making for approval. STONES PATTERN

Only AFTER you show us pictures of the flowers and the stones we will give you permission to apply the stones on the back.

PAGE 11 OF 15

COMMENTS

17. BACK DETAILS BEADS AROUND THE FLOWER: USE THIS PICTURE AS REFERENCE FOR THE LITTLE BEADS THAT MUST SURROUND THE FLOWER. (REMEMBER WE WILL TELL YOU HOW TO PISSISIONATE THESE BEADS AFTER WE APPROVE THE QUALITY BY PHOTO) . Please find a prolix way to resolve the interior because he back will not be lined. Advise if you can use transparent thread or if there is a better option.

STONES INSIDE THE FLOWER: IF YOU CAN’T FIND THE MATE PASTEL COLOR FOR THE STONES YOU CAN USE THIS COLOR IN THE PICTURE.

DULL PASTEL COLOR REFERENCE:

PAGE 12 OF 15

COMMENTS

18.FLOWER MACRAME IN BACK LOCATION/MEASURES The draw on the jacket is only for location reference & flower measure, do not pay attention to the draw in self, this is not how we want the work be done. Locate the flower 10.5cm below the collar.

21.5cm flower length

21.5cm flower width

Filled with many stones as the image below

COMMENTS

PAGE 13 OF 15

6CM EXTENSION

The stones all around the flower extends from it 6 cm in total .

19. PLEASE USE THE SKETCH AS REFERENCE, NOT THE PHOTO.

PAGE 14 OF 15

COMMENTS

20. Zipper puller 12.We want you to show us different options of braid for the zipper puller. Color: Same as main leather

The puller is attached to an eyelet in the zipper. (not a slider)

Images of reference for braid:

PAGE 15 OF 9

COMMENTSS IMPORTANT INFORMATION 21. Make half moon and loop in collar same as like picture below . Add 1 snapp 11 mm flat in llop same as picture below.

CORRECT SHAPE

5cm

9,5cm 1,5cm

11cm 5cm

3,5cm

MANTAIN SNAP AT 3,5 cm

12. For labeling look at guide book label. For this sample just put main label and size label.