Wiring-diagram.pptx

St. Jude Audio Signal for Topp Pro Speaker

EMT Pipe 1 ½” 2 x Belden CAT5E/CAT6 5 x Belden 1 pair

To Control Room EMT Pipe 1 ½” 4 x Belden CAT5E/CAT6 10 x Belden 1 pair

12” x 12” x 4” Pull-Box Located above the ceiling where the existing lighting are located (Optional)

Note: - Panel Board is located at the control room - Pull-box for electrical outlet are located above the ceiling where the speakers are located. - Separate pull-box for electrical and signal wiring

4 x XLR Surface mount

12” x 12” x 4” Pull-Box Located above the ceiling where the existing speakers are located

2 x Belden CAT5E/CAT6 2 x Belden 1 pair

12” x 12” x 4” Pull box

EMT Pipe ½” 2 x Belden 1 pair

EMT Pipe 1 ½” 4 x Belden CAT5E/CAT6 10 x Belden 1 pair EMT Pipe 1 ½” 2 x Belden CAT5E/CAT6 5 x Belden 1 pair 12” x 12” x 4” Pull-Box Located above the ceiling where the existing speakers are located

XLR Surface mount 2 x Belden CAT5E/CAT6 2 x Belden 1 pair

XLR Surface mount

St. Jude Electrical Supply for Topp Pro Speaker 1

3

2

4 12” x 12” x 4” Pull-Box

CB 1

CB 6

CB 2

CB 7

CB 3

CB 8

CB 4

CB 9

CB 5

CB10

EMT Pipe 1” 4 x THHN # 12 (Red) 4 x THHN # 12 (Black) 1 x THHN # 12 (Green)

4 x AC power cord

12” x 12” x 4” Pull box

EMT Pipe 1 ½” 8 x THHN # 12 (Red) 8 x THHN # 12 (Black) 2 x THHN # 12 (Green)

Panel Board

1 x AC power cord

EMT Pipe 1” 4 x THHN # 12 (Red) 4 x THHN # 12 (Black) 1 x THHN # 12 (Green)

1 x AC power cord

10 Note: - Panel Board is located at the control room - Pull-box for electrical outlet are located above the ceiling where the speakers are located. - Separate pull-box for electrical and signal wiring

5

6

6

8 12” x 12” x 4” Pull-Box

4 x AC power cord

St. Jude Audio signal diagram

Main Out

Aux out