Windows Vista Network Troubleshooting

Windows Vista Troubleshooting

[ Xplover ] ‫شـــــروحات عاشق االكس بي‬

Windows Vista Network Troubleshooting The networking problems discussed here are based on the assumption that you have a network that is working fine, but adding a Windows Vista computer to the network creates problems connecting this Vista computer to your network. First, take some time to read through this Microsoft TechNet article that describes File and Printer Sharing in Windows Vista. One of the differences between Windows XP and Vista is that Windows Vista by default does not allow simple file sharing. Access to shared folders, including the public folder (if shared), requires a user name and password, so I suggest using usernames and passwords on all your computers. There are many people complaining about Windows Vista networking. One particular problem involves connectivity problems between Vista and previous Windows versions (mostly XP) when they are on the same network. You might be able to connect to another computer just fine, but as soon as you try to copy a file, you run into trouble. You typically receive an error message that you don't have permission to copy the file. Microsoft has acknowledged (see Microsoft Knowledge Base Article 932134) that Windows Vista may not function correctly with "outdated routers". Microsoft has released an Internet Connectivity Evaluation tool to test your router's compatibility.

Receive Window Auto-Tuning

Vista has a new feature called Receive Window Auto-Tuning. This continually determines the The very first thing you should do when having connection optimal receive window size by problems with Vista on your network is to check for updated drivers measuring the bandwidth-delay for your network card on the manufacturer's Web site. Also check product and the application for the latest firmware version of your router. retrieve rate, and adjusts the maximum receive window size based on changing network If you run the Internet Connectivity Evaluation tool, and it shows conditions. that your router does not support "TCP Extensions for High Performance", you can either change your router, or switch off the feature in Vista. To do this, you'll have to open an elevated Receive Window Auto-Tuning command prompt: enables TCP window scaling by default, allowing up to a 16 MB Click Vista's Start button, and in the Start Search box type cmd. At window size. As the data flows the top of the Start menu (under the Programs header), you will see over the connection, Vista's TCP/IP stack monitors the cmd.exe listed; right-click this entry, and from the context menu connection, measures the current click Run as administrator (Figure) (you can also press the bandwidth-delay product for the Ctrl+Shift+Enter keys simultaneously after you typed cmd in Vista's Start Search box, this will also get you an elevation prompt connection and the application

[email protected]

1

Windows Vista Troubleshooting

[ Xplover ] ‫شـــــروحات عاشق االكس بي‬

to run cmd.exe in administrator mode). At the command prompt, receive rate, and adjusts the type netsh interface tcp set global autotuninglevel=disabled. You receive window size to optimize should get a response Ok. To check, you can run the command throughput. netsh interface tcp show global. Look for Receive Window AutoTuning Level: Disabled (Figure). To set the TCP/IP Auto-Tuning Level back to Vista default, use this command: netsh interface tcp set global autotuningl=normal Problems connecting to the network

If you have a DHCP server configured on your network, and your network is working fine with Windows XP, but your Windows Vista system cannot seem to get connected to your network (it will not receive an IP address from the DHCP server), it could be that your DHCP server (which is usually a router in a typical home network) does not support the DHCP BROADCAST flag. In Windows XP SP2, the BROADCAST flag in DHCP discovery packets is set to 0 (disabled). In Windows Vista, the BROADCAST flag in DHCP discovery packets is not disabled. This causes some routers (and some non-Microsoft DHCP servers) to fail processing DHCP discovery packets. One of the symptoms you can use to identify the failure of receiving an IP address from a DHCP server is that your computer's IP address will be listed in the 169.254.x.x address range (a so called APIPA address). You can check the IP address of your computer by checking the status of your connection from Vista's Network and Sharing Center, or by running the command ipconfig /all from a command prompt. It may not be true in all cases that the failure to obtain a correct IP address is caused by the incompatibility of your DHCP server, but it's another thing to troubleshoot. This registry edit will disable the DHCP BROADCAST flag in Windows Vista: 1. Start the Registry Editor 2. Find & select HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Tcpip \ Parameters \ Interfaces \ {#####} You'll have to select the {#####} subkey that corresponds to the network adapter that is connected to the network. 3. On the Edit menu, point to New, and then click DWORD (32-bit) Value 4. Give the new entry the name DhcpConnEnableBcastFlagToggle 5. Right-click DhcpConnEnableBcastFlagToggle, and then click Modify 6. In the Value data box, type 1, and then click OK 7. Close the Registry Editor

Another issue that has been identified & fixed is that your Vista based computer will lose the default gateway settings when you wake it from sleep. Microsoft issued a fix for this issue back in September 2007. See Microsoft Knowledge Base Article 933872.

[email protected]

2

Windows Vista Troubleshooting

[ Xplover ] ‫شـــــروحات عاشق االكس بي‬

Problems using a wireless connection

There have been several problems identified, and Microsoft has issued fixes for these back in September 2007 as indicated in Microsoft Knowledge Base Article 932063:   

 

IEEE 802.1X authentication that is based on Virtual Local Area Network (VLAN) switching may fail In a wireless profile, the information about the Extensible Authentication Protocol (EAP) method that is selected in a user interface may be incorrect A wireless profile that an independent hardware vendor (IHV) provides may be corrupted after you use the wireless profile user interface to edit the profile. When this problem occurs, you may receive an error message that Windows Explorer has crashed Every time that you roam to a different wireless access point, you are prompted to provide a user credential. This problem occurs even if you have saved the user credential You registered a Protected Extensible Authentication Protocol (PEAP) method that the IHV provided. When you try to authenticate against an Internet Authentication Service (IAS) server, the server may reject the authentication, and the IAS server may send an error message that the authentication has failed. The Onex.dll file crashes when this problem occurs

The hotfix for these issues is not yet publicly available. If you experience any of the problems listed above, go to this Microsoft Web page and enter the KB Article number (932063) and other requested details, and Microsoft will send you the hotfix via email (it can take several hours for the fix to arrive).

Microsoft also has a fix available for another issue, described as follows: Five minutes after you log on to a Windows Vista-based computer, 802.1X network authentication times out, and authentication fails. Therefore, network connectivity is not established. You are not prompted to log on to a wired 802.1X network during the five-minute period after you log on. For more information & the location of the fix, see Microsoft Knowledge Base Article 937123.

In October Microsoft also released a compatibility, reliability and stability update, which also should improve the stability of wireless network services. For more information & download of this update, see Microsoft Knowledge Base Article 941649.

Stateful Packet Inspection

One of the problems is that Windows Vista's new TCP/IP stack falls apart when it encounters Stateful Packet Inspection (SPI) firewalls on some older routers. One option is to disable SPI in your router (not possible in all routers), although this will weaken your network security. The first thing you should try to do is to get updated firmware for your router from the router manufacturer's Web site.

[email protected]

3

Windows Vista Troubleshooting

[ Xplover ] ‫شـــــروحات عاشق االكس بي‬

IPv4 checksum

There are also reports that some network drivers are not setting the IPv4 checksum (you can verify this with a network monitoring tool), and that switching off IPv4 Checksum Offload from the network adapter's Advanced settings will fix connectivity issues. You can get to the network adapter's Advanced settings by opening Device Manager from Vista's System control panel applet, and double-clicking your network adapter under Network adapters. From your adapter's properties page, select the Advanced tab and select IPv4 Checksum Offload under Property (Figure). Set the Value to Disabled. Some people also suggest disabling TCP Checksum Offload (IPv4) & UDP Checksum Offload (IPv4).

Please note that it may be possible that you can't set these options in your network adapter's properties. This is a function of the adapter's driver. So as with most suggestions in this article, your 1st option would be to make sure you are running the latest driver available for your network adapter!

Anti-Virus software

There have been quite a number of reports from users with Norton and McAffee software that their Internet connection failed after an update. If you have either software, disable it and see if that restores your Internet connection. If so, you may want to choose another AV software. For recommendations, see this post on WindowsBBS.com.

Advanced network adapter troubleshooting for Windows workstations

Microsoft has a Knowledge Base Article that describes advanced troubleshooting for network adapters. This article may give you some adittional information when troubleshooting connection problems. See Microsoft Knowledge Base Article 325487.

Still Problems?

[email protected]

4

Windows Vista Troubleshooting

[ Xplover ] ‫شـــــروحات عاشق االكس بي‬

Feel free to post a message on our WindowsBBS.com Support forum's Networking forum.

Microsoft Knowledge Base Article's dealing with Windows Vista Networking

325487 899148 922120 926170 926180 927546 927831 -

928152 928229 928233 928429 928429 928896 928906 -

929451 929490 929661 929707 -

929829 -

Advanced network adapter troubleshooting for Windows workstations Some firewalls may reject network traffic that originates from Windows Server 2003 Service Pack 1-based or Windows Vista-based computers Network Map in Windows Vista does not display computers that are running Windows XP The MS-CHAP version 1 authentication protocol has been deprecated in Windows Vista When an IP address changes to a static IP address, a static IP address and an alternate IP address remain on the network interface in Windows Vista You see only four available wireless network connections when you use a USBbased wireless network adapter in Windows XP or in Windows Vista An updated password is not saved for all users when you change the password for an all-user network connection in Windows Vista, and you receive the following error message: "Error 5: Access is denied" You may experience connectivity issues or performance issues when you connect a mobile PC that is running Windows Vista to a wireless access point Third-party network-related programs that use NDIS drivers may no longer function after you upgrade a computer to Windows Vista Windows Vista cannot obtain an IP address from certain routers or from certain nonMicrosoft DHCP servers How to connect to a wireless network in Windows Vista How to connect to a wireless network in Windows Vista After you log on to Windows Vista by using the Guest account, the network icon indicates that the network is either disabled or disconnected The "IF_TYPE_PPP" interface type is incorrectly returned by the remote access service when the remote access service establishes a VPN tunnel interface in Windows Vista A client computer that is running Windows Vista registers an old IP address when the GUID of a network adapter changes Windows Vista-compatible third-party virtual private network (VPN) client schedules Connecting to non-broadcast wireless networks in Windows Vista You experience poor video quality or slow performance when you use Windows Media Extender features on a home network that uses a Gigabit Ethernet switch on a Windows Vista-based computer The KMS current count does not increase when you add new Windows Vista-based client computers to the network

[email protected]

5

Windows Vista Troubleshooting

[ Xplover ] ‫شـــــروحات عاشق االكس بي‬

929847 929849 -

929853 -

930085 -

930089 930163 -

930311 930517 931671 931770 932045 -

932063 932134 932306 932633 933468 933657 -

933872 933924 934160 -

How to enable computer-only authentication for a 802.1X-based network in Windows Vista TCP/IPv4 is still enabled for a network connection in Control Panel after you run the "netsh interface IPV4 uninstall" command to disable TCP/IPv4 on a Windows Vistabased computer You cannot access network resources and domain name resolution is not successful when you establish a VPN connection to the corporate network from a Windows Vista-based computer When you create a network connection that automatically calls another connection in Windows Vista, incorrect credentials appear when Windows Vista tests the connection Windows Vista may be unable to connect to a Microsoft Broadband Networking Wireless Base Station MN-700 that is configured to use 802.11g In Windows Vista, you cannot access any resources on a remote VPN server after you switch a network connection from one network adapter to another network adapter and then dial a VPN connection Occasional error message on a portable Windows Vista-based computer that wakes from sleep to perform network-related tasks: "STOP 0x0000007E" Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "Connected with limited access" Error message when you put a Windows Vista-based computer to sleep while a PPP connection is active: "STOP 0x0000009F" The copy process may stop responding when you try to copy files from a server on a network to a Windows Vista-based computer Error message when you use a network connection to copy a large file from one Windows Vista-based computer to another Windows Vista-based computer: "The connection has been lost" Several problems occur on a Windows Vista-based computer when you work in a wireless network environment An outdated network router may not function correctly when you use it together with new networking features in Windows Vista How to configure folders to share media with a Media Center Extender A Windows Vista-based computer does not wake from sleep when a PassThru driver is installed You cannot access SMB shares on a corporate network through a Remote Access Service (RAS) connection from a computer that is running Windows Vista You intermittently lose access to network resources if more than one Network Device Interface Specification (NDIS) filter driver is installed on a computer that is running Windows Vista The default gateway setting is lost when you wake a Windows Vista-based computer from sleep The Network Discovery and File Sharing dialog box may be unexpectedly minimized to the taskbar in Windows Vista Error message in Windows Vista when you try to rename a new subfolder in a shared folder on the network: "The <SharedFolderName> folder does not exist"

[email protected]

6

Windows Vista Troubleshooting

[ Xplover ] ‫شـــــروحات عاشق االكس بي‬

934430 934539 -

934555 935222 935260 935279 935427 935755 936211 937097 937123 937151 937168 937477 937624 938000 938062 938091 938106 938475 -

940291 941145 941542 -

Network connectivity may fail when you try to use Windows Vista behind a firewall device Error message when a system service on a Windows Vista-based computer connects to a system service on another Windows Vista-based computer: "cannot connect to machine" The Wireless Network tile is not displayed in Windows Mobility Center on a mobile PC that is running Windows Vista You cannot connect to a wireless network on a Windows Vista-based computer Network Map is not displayed correctly in Windows Vista when you use DBCS characters in the SSID for the network name 802.11g is displayed instead of 802.11n for the wireless network adapter in Windows Vista When you transfer a file between a Windows Vista-based client computer and a file server, Windows Vista stops responding You cannot access a shared network resource that is hosted by a Windows Vistabased computer if the SMB request packet exceeds the MTU size How to troubleshoot network connectivity problems in Internet Explorer Problems with the network, hard disk drive, or storage drivers cause a program to stop unexpectedly in Windows Vista You are not prompted to log on to a wired 802.1X network in Windows Vista You cannot connect to the Internet from a Windows Vista-based computer that uses a local .pac file After you configure Internet Connection Sharing in Windows Vista, the network connection stops working after one-to-two hours After you wake a Windows Vista-based computer from sleep or from hibernation, the network icon in the notification area does not show the correct connectivity status After you turn on User Account Control in Windows Vista, programs may be unable to access some network locations FIX: A network redirect driver may not work correctly in Windows Vista A red "X" appears in the icon for a mapped network drive in Windows Vista, even though you can successfully access the drive After you resolve an offline files synchronization conflict by using the "Keep both versions" option, the conflict occurs again on a Windows Vista-based computer Error message when you synchronize files on a Windows Vista-based computer: "Unexpected Network Error" Error message when you use a Windows Vista-based computer to try to access files on a Windows Vista-based file server: ":\ is not accessible. Insufficient system resources exist to complete the API" Error message when you try to install a program from the network on a Windows Vista-based computer: "Fatal error during installation" Unwanted wake-up events may occur when you enable the Wake On LAN feature in Windows Vista When you try to connect a Windows Vista-based computer to a network printer whose name is not a UNC path, the connection fails

[email protected]

7

Windows Vista Troubleshooting

[ Xplover ] ‫شـــــروحات عاشق االكس بي‬

941808 942541 -

943451 -

After you lock and then unlock a Windows Vista-based client computer, you may be prompted for user credentials before you can access network resources After you use Windows Photo Gallery to display an image in full-screen mode on a Windows Vista-based computer, the image is not displayed on a network projector that is connected to the computer You cannot access a network share on a Unisys MCP server from a Windows Vistabased computer by typing a UNC path that does not include the share name

[email protected]

8