Windows 10 Pptp Vpn Client Setup

Windows 10 PPTP Client Setup

1) Go to Task bar and right click on Network Icon. 2) Proceed to click on Open Network and Sharing Center.

3) Network and Sharing Center window will appear proceed to click on Set up a new connection or network.

4) Set up a Connection or Network window appears. Choose Connect to a workplace option and click Next.

5) Proceed to click on Use my Internet connection (VPN).

6) Let’s type the IP address: (172.16.253.1), and type Destination Name: for example: MUET and Click on Create. Note: For safety concern, don’t Click on remember my credentials option.

7) Again Go to Task bar and right click on Network Icon. 2) Proceed to click on Open Network and Sharing Center, and then click on Change Adapter Settings.

Right click the MUET VPN Connection and click on Properties in order to configure this connection in details as needed.

Note: If you open VPN connection properties, you can make further VPN configuration. The security tab also shows you the supported Type of VPN (PPTP) and Data Encryption (No Encryption) and also select allow these protocols and click on Unencrypted PAP.