Weather Station Instructions.pdf

How to Install the Weather Station Instrument 220WX with the Display unit RD 33



Mount the Display unit RD 33. 



Connect the NMEA cable that comes with the display (M12-05BM+05BF-60) with the NMEA2000 T-Connector. (Male side on the Display, Female side on the Tconnector).  

 

Mount the Weather Station antenna and make sure that the alignment indentation facing the bow of the vessel (See Below).

    

Connect the antenna cable with the antenna using the 10-pin connector. 



Cut the other end of the antenna cable and connect it inside the AIRMAR connection box as shown below.



Connect the same color of both cables (antenna cable + AIRMAR ROHS L1285 cable and use the same colors) - white, blue, red and black.



  

Tototheo Trading Ltd - PART OF TOTOTHEO MARITIME A. 89 Omonoias Avenue, 3048, PO Box 51449, 3505, Limassol, Cyprus T. +357 25 569 155 | F. +357 25 567 033 | E. [email protected] www.tototheo.com

 

Connect the AIRMAR ROHS L1285 cable on the left side of the T-Connector that display is connected on 



On the other side of the T-Connector, connect the Power Cable (yellow color) and then the NMEA 2000 Terminator.  



 

Apply 24VDC and 0V on the cables as shown below.

Tototheo Trading Ltd - PART OF TOTOTHEO MARITIME A. 89 Omonoias Avenue, 3048, PO Box 51449, 3505, Limassol, Cyprus T. +357 25 569 155 | F. +357 25 567 033 | E. [email protected] www.tototheo.com